LG | 47LM960V | LG 47LM960V Owner’s Manual

OWNER’S MANUAL
LED LCD TV
Please read this manual carefully before operating your set and retain it
for future reference.
P/NO : MFL67441716 (1203-REV00)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
3
OPEN SOURCE SOFTWARE NOTICE
4
SAFETY INSTRUCTIONS
10
Viewing 3D Imaging
12
INSTALLATION PROCEDURE
12
ASSEMBLING AND PREPARING
12
15
16
17
18
18
22
23
24
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
- Mounting on a table
- Mounting on a wall
- Tidying cables
25
MAKING CONNECTIONS
25
25
26
27
27
28
28
29
29
30
30
31
31
32
Antenna connection
Satellite connection
HDMI connection
DVI to HDMI connection
MHL connection
RGB-PC connection
Component connection
Composite connection
Euro scart connection
Audio connection
- Digital optical audio connection
USB connection
CI module connection
Headphone connection
33
MAGIC REMOTE CONTORL FUNCTIONS
34
34
34
Registering magic remote control
How to use magic remote control
Precautions to take when using the magic
remote control
35REMOTE CONTORL
36
USING THE USER GUIDE
37
MAINTENANCE
37
37
37
Cleaning Your TV
- Screen, frame, cabinet and stand
- Power cord
37
TROUBLESHOOTING
38
SPECIFICATIONS
warning
If you ignore the warning message, you
yy
may be seriously injured or there is a
possibility of accident or death.
CAUTION
If you ignore the caution message, you
yy
may be slightly injured or the product may
be damaged.
NOTE
The note helps you understand and use
yy
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays DivX
video. Visit divx.com for more information and software tools to convert your files into
DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu.
Go to vod.divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark of
DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTrUCTIONS
ENGLISH
ENG
SAFETY INSTrUCTIONS
Please read these safety precautions carefully before using the product.
wArNING
Do not place the TV and remote control in the following environments:
yy
» A location exposed to direct sunlight
» An area with high humidity such as a bathroom
» Near any heat source such as stoves and other devices that produce heat
» Near kitchen counters or humidifiers where they can easily be exposed to steam or
oil
» An area exposed to rain or wind
» Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely.
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in.
This may cause water damaged inside the Product and could give an electric shock.
SAFETY INSTrUCTIONS
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV.
It may cause fire, electric shock.
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of children.
yy
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
yy
In case that it eats them, take it to see a doctor immediately.
Do not insert a conductor (like a metal chopstick) into one end of the power cable
yy
while the other end is connected to the input terminal on the wall. Additionally, do not
touch the power cable right after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)
Do not put or store inflammable substances near the product.
yy
There is a danger of explosion or fire due careless handling of the inflammable
substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something.
You may be injured or the product can be damaged.
ENGLISH
ENG
wArNING
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
warning
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
» The product has been impacted by shock
» The product has been damaged
» Foreign objects have entered the product
» The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
CAUTION
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product from
yy
overturning. Otherwise, the product may fall over, which may cause injury.
SAFETY INSTRUCTIONS
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts)
yy
to the back of the product. When you install the set to use the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man.
yy
This may create a fire hazard or an electric shock hazard.
5~7 times
We recommend that you maintain a distance of at least 5 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light. In
yy
this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
» The distance between the product and the wall should be more than 10 cm.
» Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a
cupboard).
» Do not install the product on a carpet or cushion.
» Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
CAUTION
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of time.
yy
Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source
yy
even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
When moving or unpacking the product, work in pairs because the product is heavy.
yy
Otherwise, this may result in injury.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange
or refund.
You may find different brightness and colour of the panel depending on your viewing
yy
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel
yy
logo, on-screen menu, scene from a video game) for
a prolonged time may cause damage to the screen,
resulting in retention of the image, which is known as
image sticking. The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your television’s screen
for a prolonged period (2 or more hours for LCD, 1 or
more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time,
image sticking may occur on the borders of the panel.
This phenomenon also occurs in third-party products and
is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
CAUTION
9
10
SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging
warning
Viewing Environment
Viewing Time
yy
When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
Some users may experience a seizure or other abnormal symptoms when they are exposed to a
yy
flashing light or particular pattern from 3D contents.
Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as
yy
epilepsy, cardiac disorder, or blood pressure disease, etc.
3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
yy
Double images or discomfort in viewing may be experienced.
If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have
yy
trouble sensing depth and easily feel fatigue due to double images. It is advised to take frequent
breaks than the average adult.
If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
yy
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy
When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
yy
the symptom subsides.
» Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
Viewing Environment
Viewing Distance
yy
Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
Infants/Children
yy
Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring and
extra attention is required for children watching 3D contents.
Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than one of adults. Therefore they will perceive more stereoscopic depth
compared to adults for the same 3D image.
Teenagers
yy
Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D contents.
Advise them to refrain from watching 3D contens for a long time when they are tired.
Elderly
yy
The elderly may perceive less 3D effect compared to the youth. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yy
Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yy
Using modified 3D glasses may cause eye strain or image distortion.
yy
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yy
The 3D glasses are fragile and are easy to be scratched. Always use a soft, clean piece of cloth when
yy
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
ENGLISH
ENG
CAUTION
11
12
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yyThe available menus and options may differ from the input source or product model that you are using.
yyNew features may be added to this TV in the future.
yyThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of
product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and
18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.
B
B
A
A
A
B
10 mm
18 mm
ASSEMBLING AND PREPARING
13
ENGLISH
ENG
P
Owner’s manual
Magic remote control,
batteries (AA)
(See p.33)
Remote control,
batteries (AAA)
(See p.35)
Composite video cable
(See p.28, 29)
Component video cable
(See p.28)
Scart gender cable
(See p.29)
Cinema 3D glasses
The number of 3D glasses
may differ depending on the
model or country.
Dual play glasses
(Depending on model)
Polishing cloth
(Depending on model)
Use this to remove dust from
the cabinet.
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Only 47/55/84LM96**, 42/47/55LM86**
Stand rear cover
(See p.18, 19)
Stand body
(See p.18, 19)
Stand screws
8 EA, M4 x 20
(See p.18, 19)
Cable holder
2 EA
(See p.24)
Stand base
(See p.18, 19)
Only 72LM95**
Stand rear cover
(See p.21)
Stand body
(See p.21)
Stand base
(See p.21)
Stand screws
4 EA, M4 x 20 / 4 EA, M5 x 35
(See p.21)
Cable holder
2 EA
(See p.24)
Power cord
Wireless LAN
ASSEMBLING AND PREPARING
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
P
AN-MR300
Magic remote control
AG-F2**, AG-F3**
Cinema 3D glasses
AG-F2**DP, AG-F3**DP
Dual play glasses
AN-WF100
Wireless LAN
Compatibility
47/55/84LM96**
72LM95**
42/47/55LM86**
AN-MR300
Magic remote control
•
•
•
AG-F2**, AG-F3**
Cinema 3D glasses
•
•
•
AG-F2**DP, AG-F3**DP
Dual play glasses
•
•
•
AN-WF100
Wireless LAN
•
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ENGLISH
ENG
Separate purchase
15
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
47/55/84LM96**, 42/47/55LM86**
Screen
OK
SETTNGS
S
INPUT
Buttons
Speakers
Remote control and
intelligent sensors1
Only 42/47/55LM86**: LG Logo Light
Power Indicator
72LM95**
Screen
OK
SETTNGS
INPUT
Speakers
Buttons
Remote control and
intelligent sensors1
Power Indicator
Button
Description
Scrolls through the saved programmes.
Adjusts the volume level.
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
NOTE
yy
You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
When transporting a large TV, there should be
yy
at least 2 people.
When transporting the TV by hand, hold the
yy
TV as shown in the following illustration.
CAUTION
yy
Avoid touching the screen at all times, as this
may result in damage to the screen.
It is recommended to move the TV in the box
yy
or packing material that the TV originally came
in.
Before moving or lifting the TV, disconnect the
yy
power cord and all cables.
When holding the TV, the screen should face
yy
away from you to avoid damage.
When transporting the TV, do not expose the
yy
TV to jolts or excessive vibration.
When transporting the TV, keep the TV
yy
upright, never turn the TV on its side or tilt
towards the left or right.
Whenever you handle TV, Protection pad
yy
should be covered with side of TV. (Depending
on model)
Hold the top and bottom of the TV frame firmly.
yy
Make sure not to hold the transparent part,
speaker, or speaker grill area.
Protection pad
ENGLISH
ENG
Lifting and moving the TV
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
Image shown may differ from your TV.
Attaching the stand
47/55/84LM96**
1
4 EA
M4 x 20
Stand body
4
4 EA
M4 x 20
Front
Stand base
Top View
2
Stand rear cover
3
CAUTION
yy
Make sure that the screws are fastened
completely. If they are not fastened securely
enough, the TV may tilt forward after being
installed.
yy
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
NOTE
CAUTION
yy
When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
yy
Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
19
1
3
Wrapping bag
4 EA
M4 x 20
Stand body
Front
Stand base
CAUTION
Top View
2
Stand rear cover
yy
When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
4
ENGLISH
ENG
42/47/55LM86**
20
ASSEMBLING AND PREPARING
ENGLISH
ENG
5
6
4 EA
M4 x 20
Protection pad
NOTE
yy
Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
CAUTION
yy
Make sure that the screws are fastened
completely. If they are not fastened securely
enough, the TV may tilt forward after being
installed.
yy
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
ASSEMBLING AND PREPARING
21
1
4 EA
M5 x 35
Stand body
4
4 EA
M4 x 20
Front
Stand base
Top View
2
CAUTION
CAUTION
yy
When attaching the stand to the TV set,
place the screen facing down on a cushioned
table or flat surface to protect the screen
from scratches.
3
Stand rear cover
yy
Make sure that the screws are fastened
completely. If they are not fastened securely
enough, the TV may tilt forward after being
installed.
yy
Do not fasten the screws with too much
force; otherwise they may be worn out and
get loosened.
NOTE
yy
Remove the stand before installing the TV on
a wall mount by performing the stand
attachment in reverse.
ENGLISH
ENG
72LM95**
22
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
Securing the TV to a wall
1 Lift and tilt the TV into its upright position on a
table.
This feature is not available for all models.
-Leave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yyDo not place the TV near or on sources of
heat, as this may result in fire or other damage.
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
20˚
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy
Make sure that children do not climb on or
hang on the TV.
CAUTION
yyWhen adjusting the angle of the product, watch
out for your fingers.
Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
NOTE
yy
Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy
Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
CAUTION
Attach a wall mount bracket at the rear of the TV
carefully and install the wall mount bracket on a
solid wall perpendicular to the floor. When you
attach the TV to other building materials, please
contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
NOTE
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Wall mount bracket
Model
VESA (A x B)
Standard
screw
Number of
screws
Wall mount
bracket
47/55LM96**
84LM96**
42/47/55LM86** 72LM95**
400 x 400
600 x 400
M6
M8
4
4
LSW400BX
LSW400BXG
LSW600B
A
B
yy
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
yy
If you install the TV on a ceiling or slanted
wall, it may fall and result in injury. Use an
authorized LG wall mount bracket and
contact the local dealer or qualified
personnel.
yy
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy
Use the screws and wall mount bracket that
meet the VESA standard. Any damages or
injuries by misuse or using an improper
accessory are not covered by the warranty.
yy
Use the screws that are listed on the VESA
standard screw specifications.
yy
The wall mount kit includes an installation
manual and necessary parts.
yy
The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy
For more information, refer to the manual
supplied with the wall mount bracket.
yy
The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
(Depending on model)
yy
In order to protect the TV screen(scratch,
fingerprint), put TV on flat table without
removing wrapping bag.
yy
After removing the wrapping bag on the back
of the TV, install TV according to manual
included in wall mounting bracket product.
yy
Remove protection pads after installing TV.
ENGLISH
ENG
Mounting on a wall
23
24
ASSEMBLING AND PREPARING
Tidying cables
ENGLISH
ENG
47/55/84LM96**, 42/47/55LM86**
72LM95**
1 Gather the cables with the stand rear cover.
1 Install the cable holder as shown.
Stand rear cover
2 Install the cable holder as shown.
Cable holder
2 Gather and bind the cables with the cable
holder.
Cable holder
3 Gather and bind the cables with the cable
holder.
3 Pull the cable management on the stand rear
cover and organize cables. Then, put it back.
Cable management
CAUTION
yy
Do not move the TV by holding the cable holder, as the cable holders may break, and injuries and
damage to the TV may occur.
4(MHL)
25
3
PR
PB
Y
IN
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
USB IN
COMPONENT
PCMCIA CARD SLOT
Connect various external devices to the TV
and switch input modes to select an external
device. For more information on external device’s
connection, refer to the manual provided with each
device.
IN/OUT
IN
Available external devices are: HD receivers,
(PC)
(RGB/DVI)
(RGB)
LAN systems,
DVD players, VCRs, audio
USB
storage
RGB
AUDIO
AV1
devices, PC, gaming devices, and other external
devices.
AUDIO
1 HDD IN 2 USB
VIDEO
IN
2
AV 2
3 USB Apps
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
1(ARC)
This section on MAKING CONNECTIONS mainly
uses diagrams for the 47/55LM96** models.
Antenna connection
NOTE
3
2
1(ARC)
Satellite connection
/DVI IN
4(MHL)
yy The external device connection may differ
from the model.
NOTE
yy Connect external devices to the TV
regardless of the order of the TV port.
yyUse a signal splitter to use more than 2 TVs.
yy If you record a TV program on a DVD
yyIf the image quality is poor, install a signal
recorder or VCR, make sure to connect the
amplifier properly to improve the image quality.
TV signal input cable to the TV through a
yyIf the image quality is poor with an antenna
DVD recorder or VCR. For more information
connected, try to realign the antenna in the
of recording, refer to the manual provided
correct direction.
with the connected device.
yyAn antenna cable and converter are not provided.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
Connect the TV to a satellite dish to a satellite
device.
socket with a satellite RF cable (75 Ω).
yy In PC mode, there may be noise associated
IN
with the resolution, vertical pattern, contrast
AV 2
COMPONENT
or brightness. If noise is present, change
VIDEO AUDIO PR PB Y
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
IN/OUT
IN
OUT
IN
not work properly depending on the(PC)
graphics
13/18V
(RGB/DVI)
(RGB)
700mA Max ANTENNA OPTICAL H/P
LNB IN
DIGITAL
LAN
card.
RGB
AUDIO
AV1
Satellite / CABLE
AUDIO
ENGLISH
ENG
MAKING
CONNECTIONS
/DVI IN
MAKING CONNECTIONS
USB
1 HDD IN 2 USB
MAKING CONNECTIONS
ENGLISH
ENG
HDMI connection
PCMCIA CARD SLOT
26
3
/DVI IN
4
(MHL)
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
AUDIO
COMPONENT
PR
PB
Y
1
(ARC)
VIDEO
IN
(RGB/DVI)
AUDIO
IN/OUT
(RGB)
AV1
IN
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
It is recommended to use the TV with the
yy
HDMI connection for the best image quality.
Use the latest High Speed HDMI™ Cable
yy
with CEC (Customer Electronics Control)
function.
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
Supported DTV Audio:
yy
MPEG, Dolby Digital, Dolby Digital Plus
Supported HDMI Audio format :
yy
Dolby Digital, PCM (Up to 192 KHz,
32k/44.1k/48k /88k/96k/176k/192k, DTS Not
supported.)
2
AV 2
NOTE
(*Not Provided)
Blu-Ray / HD Cable Box /
HD STB / DVD / PC
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
When connected with a high-speed
yy
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
DIO
Y
AV 2
(RGB)
AV1
Y
(PC)
RGB
IN
(RGB/DVI)
IN/OUT
(RGB)
IN
AUDIO
AV1
(PC)
(RGB/DVI)
LAN
RGB
AUDIO
IN
IN
AUDIO
COMPONENT
PR
PB
Y
OUT
ANTENNA OPTICAL H/P
DIGITAL
IN/OUT
IN
Satellite / CABLE
AUDIO
13/18V
13/18V
700mA Max
LNB IN
(RGB)
AV1
(*Not Provided)
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
700mA Max
LNB IN
OUT
MHL cable
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
3
IN
2
PB
/DVI IN
3
PR
1(ARC)
PB
1(ARC)
PR
2
COMPONENT
AUDIO
1(ARC)
3
COMPONENT
4(MHL)
/DVI IN
4(MHL)
/DVI IN
IN
2
IN
LAN
IN/OUT
PCMCIA CARD SLOT
PCMCIA CARD SLOT
4(MHL)
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
VIDEO
AUDIO
1 HDD IN 2
1 HDD I
USB IN
1 HDD IN 2 USB
PCMCIA CARD SLOT
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
(*Not Provided)
(*Not Provided)
Mobile phone
NOTE
Blu-Ray / HD Cable Box /
DVD / PC
NOTE
Depending on the graphics card, DOS mode
yy
may not work if a HDMI to DVI Cable is in
use.
Connect the mobile phone to the HDMI/DVI
yy
IN 4 (MHL) port to view the phone screen on
the TV.
This only works for the MHL-enabled phone.
yy
Some applications can be operated by the
yy
remote control.
ENGLISH
ENG
B/DVI)
MHL connection
VIDEO
VIDEO
27
DVI to HDMI connection
AV 2
AV 2
MAKING CONNECTIONS
HDDIN
I
11 HDD
PCMCIACARD
CARDSLOT
SLOT
PCMCIA
PCMCIA
MAKING CONNECTIONS
4(MHL)
Transmits the video signal from your PC to the
TV. To transmit an audio signal, connect an audio
cable.
Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a component gender cable
as shown.
VIDEO
3
IN
2
AV 2
/DVI IN
Component connection
COMPONENT
AUDIO
PR
PB
Y
(RGB/DVI)
AUDIO
IN/OUT
IN
33
OUT
ANTENNA OPTICAL H/P
IN
IN
DIGITAL
Satellite / CABLE
AV
COMPONENT
AUDIO
AV 22
COMPONENT
VIDEO
AUDIO
VIDEO AUDIO PPRR PPBB YY
13/18V
700mA Max
LNB IN
(RGB)
AV1
22
RGB
IN
(ARC)
11(ARC)
LAN
(PC)
/DVIIN
IN
/DVI
1(ARC)
ENGLISH
ENG
RGB-PC connection
(MHL)
44(MHL)
28
(*Not
Provided)
(*Not
Provided)
(PC)
(PC)
LAN
LAN
IN
IN
RGB
RGB
(RGB/DVI)
(RGB/DVI)
IN/OUT
IN/OUT
IN
IN13/18V
AUDIO
AUDIO
13/18VMax
700mA
700mA
LNB INMax
LNB IN
AV1
AV1
GREEN
YELLOW
RGB OUT (PC) AUDIO OUT
(Use the
component
video cable
provided.)
(Use the
composite
video cable
provided.)
PC
RED
RED
BLUE
WHITE
RED
RED
BLUE
GREEN GREEN
WHITE
YELLOW
(*Not
Provided)
(*Not
Provided)
GREEN
BLUE
RED
L
RED
WHITE
Blu-Ray
OUT
OUT
OPTICAL H/P
ANTENNA
ANTENNA OPTICAL
H/P
DIGITAL
/ CABLE DIGITAL
Satellite
AUDIO
Satellite / CABLE
AUDIO
(RGB)
(RGB)
R
HD Cable Box
DVD
AUDIO
VIDEO
NOTE
yy
If cables are installed incorrectly, it could
cause the image to display in black and
white or with distorted colour.
PCMCIA CARD
HDDII
11 HDD
AUDIO
COMPONENT
PR
PB
AUDIO
AUDIO
PPRR
PPBB
1(ARC)
22
COMPONENT
COMPONENT
YY
LAN
(PC)
IN
RGB
(RGB/DVI)
AUDIO
IN/OUT
(RGB)
AV1
IN
(PC)
(PC)
RGB
RGB
IN
IN
(RGB/DVI)
(RGB/DVI)
AUDIO
AUDIO
IN/OUT
IN/OUT
IN
IN13/18V
(RGB)
(RGB)
ANTENNA
ANTENNA
/ CABLE
Satellite
Satellite / CABLE
13/18VMax
700mA
700mA
LNB INMax
LNB IN
AV1
AV1
OUT
OUT
OPTICAL
OPTICAL H/P
H/P
DIGITAL
DIGITAL
AUDIO
AUDIO
(Use the scart
gender cable
provided.)
(*Not Provided)
YELLOW
(Use the composite video
cable provided.)
WHITE
RED
WHITE
RED
YELLOW YELLOW
(*Not Provided)
RED
WHITE
YELLOW
VIDEO L(MONO) AUDIO R
AV1
(TV Out1)
AV1
(When DTV
scheduled
recording is
in progress
using recording
equipment.)
Digital TV
O
Analogue TV
O
(The input mode
is converted to
DTV.)
Output
Type
Current
input mode
Digital TV
Analogue TV,
AV
Component/
RGB
HDMI
1 TV Out : Outputs Analogue TV or Digital TV signals.
Blu-Ray / HD Cable Box /
DVD / VCR
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
11
VIDEO
VIDEO
IN
IN
(ARC)
(ARC)
AV
AV 22
4(MHL)
Y
33
/DVIIN
IN
/DVI
VIDEO
IN
2
AV 2
3
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown. To display images by using progressive
scan, make sure to use the euro scart cable.
/DVI IN
PCMCIACARD
CARDSLOT
SLOT
PCMCIA
Euro scart connection
(MHL)
44(MHL)
Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a composite gender cable
as shown.
29
ENGLISH
ENG
AN
LAN
Composite connection
MAKING CONNECTIONS
US
1 HDD IN 2 US
You may use an external audio system instead of
the built-in speaker.
Any Euro scart cable used must be signal
yy
shielded.
When watching digital TV in 3D imaging
yy
mode, monitor out signals cannot be output
through the SCART cable.
If you set the 3D mode to On while a
yy
scheduled recording is performed on digital
TV, monitor out signals cannot be output
through the SCART cable, and the recording
cannot be performed.
NOTE
4(MHL)
If you use an external audio device instead
yy
of the built-in speaker, set the TV speaker
feature to off.
/DVI IN
Digital optical audio connection
3
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
AV 2
VIDEO
IN
AUDIO
COMPONENT
PR
PB
Y
1(ARC)
ENGLISH
ENG
Audio connection
NOTE
PCMCIA CARD SLOT
MAKING CONNECTIONS
2
30
LAN
(PC)
RGB
IN
(RGB/DVI)
AUDIO
IN/OUT
IN
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
(RGB)
AV1
(*Not Provided)
Digital Audio System
CAUTION
yy
Do not look into the optical output port.
Looking at the laser beam may damage your
vision.
yy
Audio with ACP (Audio Copy Protection)
function may block digital audio output.
3 USB Apps
View the encrypted (pay) services in digital TV
mode. This feature is not available in all countries.
VIDEO
USB
IN
AUDIO
PR
PB
AV 2
B/DVI)
(RGB)
AV1
INVIDEO
IN
AUDIO
COMPONENT
PROUT
PB
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
4
Y
1
DIO
IN/OUT
3
Y
2
PB
(ARC)
PR
/DVI IN
3
/DVI IN
2
COMPONENT
AUDIO
1(ARC)
VIDEO
Check
if the CI module
yy
IN
OUT is inserted into the
13/18V
700mA Max ANTENNA OPTICAL H/P
PCMCIA
card slot
in the right direction. If
LNB IN
DIGITAL
Satellite / CABLE
AUDIO
the module is not
inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
(MHL)
4(MHL)
NOTE
Some USB Hubs may not IN
work. If a USB
yy
IN/OUT
(PC)
(RGB/DVI)
(RGB)
device connected
using
a
USB
Hub
is
not
LAN
RGB
AUDIO
AV1
detected, connect it to the USB IN port on
the TV directly.
IN
(PC)
RGB
IN
(RGB/DVI)
AUDIO
IN/OUT
(RGB)
AV1
IN
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
PCMCIA CARD SLOT
Y
(*Not Provided)
NOTE
4(MHL)
3
/DVI IN
COMPONENT
1(ARC)
(*Not Provided)
AV 2
PCMCIA CARD SLOT
USB Hub
(*Not Provided)
2
USB IN
USB IN
1 HDD IN 2 USB
3 USB Apps
yyImage shown may differ from your TV.
1 HDD IN 2 USB
PCMCIA CARD SLOT
(*Not Provided)
1 HDD IN 2 USB
Connect a USB storage device such as a USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
3 USB Apps
CI module connection
ENGLISH
ENG
USB connection
HDD
AV 2
31
USB IN
MAKING CONNECTIONS
UDIO
PCMCIA CARD
4(MHL)
/DVI IN
3
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.
IN
AUDIO
COMPONENT
PR
PB
Y
1
(ARC)
VIDEO
Only 47/55/84LM96**, 42/47/55LM86**
2
AV 2
MAKING CONNECTIONS
Headphone connection
ENGLISH
ENG
B/DVI)
32
IN/OUT
(RGB)
AV1
IN
OUT
ANTENNA OPTICAL H/P
DIGITAL
Satellite / CABLE
AUDIO
13/18V
700mA Max
LNB IN
(*Not Provided)
NOTE
AUDIO menu items are disabled when
yy
connecting a headphone.
When changing AV MODE with a headphone
yy
connected, the change is applied to video but
not to audio.
Optical digital audio out is not available when
yy
connecting a headphone.
Headphone impedance: 16
yy
Max audio output of headphone: 10 mW to
yy
15 mW
Headphone jack size: 0.35 cm
yy
MAGIC REMOTE CONTORL FUNCTIONS
33
When the message "Magic remote control battery is low. Change the battery." is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure
to point the magic remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
ENGLISH
ENG
MAGIC REMOTE CONTORL FUNCTIONS
1
2
CAUTION
Do not mix old and new batteries, as this may damage the magic remote control.
yy
POINTER (RF Transmitter)
Voice Search
(Depending on model)
POWER
Turns the TV on or off.
HOME
Accesses the HOME menu.
BACK
Returns to the previous level.
(
Navigation Buttons
UP DOWN LEFT RIGHT )
Scrolls through menus or options.
Wheel(OK)
Selects menus or options and
confirms your input. Scrolls through
the saved programmes.
If you press the navigation button
while moving the pointer on the
screen, the pointer disappears, and
the magic remote control works as
a regular remote control. To display
the pointer again, shake the magic
remote control from side to side.
Adjusts the volume level.
Uses for viewing 3D video.
MY APPS
Shows the list of Apps.
MUTE
Mutes all sounds.
Scrolls through the saved
programmes.
Voice Search
This is a beta version and only available in selected functions for supported models.
1 Select the Voice Search icon on the screen.
2 Speak slowly and precisely. When a voice is recognized, the processing message appears on the
screen.
Use the magic remote control no further than 15 cm from your face.
yy
34
MAGIC REMOTE CONTORL FUNCTIONS
ENGLISH
ENG
Registering magic remote
control
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
How to register the magic remote control
1 To register automatically, turn the
TV on and press the Wheel(OK)
button. When registration is completed, the completion message
appears on the screen.
2 If registration fails, turn the TV
off and back on, then press the
Wheel(OK) button to complete
registration.
How to re-register the magic remote control
My Apps
If you press Wheel(OK) on the magic
remote control, the screen appears.
Shows information about the current
programme and screen.
Pressing this button will display number
keypad which you can select programme
number.
1 Press and hold the BACK and
You can select My Apps Menu.
2 To re-register the magic remote
Precautions to take when
using the magic remote
control
HOME buttons together for 5
seconds to reset, then register it
by following “How to register the
magic remote control” above.
control, press and hold the
BACK button for 5 seconds
toward the TV.
When registration is completed,
the completion message appears
on the screen.
How to use magic remote
control
1 If the pointer disappears, move
the magic remote control slightly
to left or right. Then, it will automatically appear on the screen.
» If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the pointer receiver of
the magic remote control at your
TV then move it left, right, up or
down.
» If the pointer does not work
properly, leave the magic
remote control for 10 seconds
then use it again.
yyUse the magic remote control within the maximum communication distance (10 m). Using
the magic remote control beyond this distance,
or with an object obstructing it, may cause a
communication failure.
yyA communication failure may occur due to
nearby devices. Electrical devices such as a
microwave oven or wireless LAN product may
cause interference, as these use the same
bandwidth (2.4 GHz) as the magic remote
control.
yyThe magic remote control may be damaged or
may malfunction if it is dropped or receives a
heavy impact.
yyTake care not to bump into nearby furniture
or other people when using the magic remote
control.
yyManufacturer and installer cannot provide
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
yyIt is recommended that an Access Point (AP)
be located more than 1 m away from the TV. If
the AP is installed closer than 1 m, the magic
remote control may not perform as expected
due to frequency interference.
REMOTE CONTROL
35
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
and ends to the label inside the compartment, and close the battery cover. Be sure to
point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
2
CAUTION
Do not mix old and new batteries, as this may damage the remote control.
yy
RATIO
Uses for viewing 3D video.
MUTE
Mutes all sounds.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
SETTINGS
Accesses the main menu.
HOME
Accesses the HOME menu.
MY APPS
Shows the list of Apps.
Navigation Buttons
(
UP
DOWN LEFT RIGHT )
Scrolls through menus or options.
BACK
Returns to the previous level.
GUIDE
Shows programme guide.
TV /
RAD
1.,;@ 2 abc 3 def
4 ghi 5 jkl 6 mno
EXIT
Clears on-screen displays and return to
TV viewing.
7pqrs 8 tuv 9 wxyz
LIST
0
Q.VIEW
FAV
P
MUTE
SETTINGS
HOME MY APPS
OK
GUIDE
Adjusts the volume level.
FAV
Accesses your favourite programme list.
OK
Selects menus or options and confirms
your input.
INPUT
[
POWER
Turns the TV on or off.
User Guide
Sees User Guide.
RATIO
Resizes an image.
INPUT
Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
Alphanumeric Buttons
Enters letters and numbers.
LIST
Accesses the saved programme list.
SPACE
Opens an empty space on the screen
keyboard.
Q.VIEW
Returns to the previously viewed
programme.
EXIT
SUBTITLE
TEXT
T.OPT
Q.MENU
LIVE TV
REC
INFO
AD
P
A
G
E
Coloured buttons (
RED
GREEN
YELLOW
BLUE )
These access special functions in some
menus.
TELETEXT buttons ( TEXT T.OPT )
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital
mode.
Q.MENU
Accesses the Quick menus.
LIVE TV
Return to the LIVE TV.
Control buttons (
)
Controls the Premium contents, DVR or
Smart Share menus or the SIMPLINK
compatible devices (USB or SIMPLINK
or DVR).
REC
Uses to adjust DVR menu.
INFO
Views the information of the current
programme and screen.
AD
Switches the Audio Description On or
Off.
APP/*
Select the MHP TV menu source. (MHP
TV is available in Italy.) (Depending on
model)
APP/*
ORANGE
Direct access to your internet portal of
entertainment and news services
developed by Orange. (Only France)
@
1
ENGLISH
ENG
REMOTE CONTORL
36
USING THE USER GUIDE
ENGLISH
ENG
USING THE USER
GUIDE
User Guide
User Guide allows you to more easily access the
detailed TV information.
1 Press HOME button to access the Home
menu.
To use input device
To use Energy Saving feature
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
PREMIUM
To set TV lock options
To set language
LG SMART Function
2 Select User Guide and press Wheel(OK).
To set time options
Disabled Assistance
Advanced Function
To set Magic Remote Control
Information
Shows the current watching programme or
input source screen.
More...
Allows to select the category you want.
My Apps
Input List
Settings
Live TV
Search
Internet
3D
LG Smart World Programme
Guide
User Guide
Recent List
Allows to select the item you want.
You can use
to move between pages.
Allows to browse the description of the
function you want from the index.
User Guide
OPTION > To set language
User Guide
NOTE
You can also access the User Guide by
yy
pressing (User Guide) button in the remote
control.
HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
PROGRAMME Setting
PICTURE, SOUND Setting
OPTION
[In Digital Mode Only]
Subtitle Language Use the Subtitle function when two or more subtitle languages
are broadcast.
If subtitle data in a selected language is not broadcast, the
default language subtitle will be displayed.
LG SMART Function
Advanced Function
Try Now
Information
Zoom In
Close
HOME Settings OPTION Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle languages
Subtitle
are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast, the
default language subtitle will be displayed.
Try Now
Zoom Out
Close
Shows the description of the selected menu.
You can use
to move between pages.
Moves to the selected menu directly from the
User Guide.
Zooms in or out the screen.
MAINTENANCE / TROUBLESHOOTING
37
Cleaning Your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy
Make sure to turn the power off and disconnect the power cord and all other cables first.
yy
When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy
Avoid touching the screen at all times, as this may result in damage to the screen.
yy
Do not push, rub, or hit the surface with your fingernail or a sharp object, as this may result in
scratches on the screen and image distortions.
yy
Do not use any chemicals as this may damage the product.
yy
Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV
yy
Check the remote control sensor on the product and try again.
with the remote control. yy
Check if there is any obstacle between the product and the remote control.
yy
Check if the batteries are still working and properly installed ( to , to ).
No image display and
yy
Check if the product is turned on.
no sound is produced. yy
Check if the power cord is connected to a wall outlet.
yy
Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
yy
Check the power control settings. The power supply may be interrupted.
suddenly.
yy
Check if the Auto sleep feature is activated in the Time settings.
yy
If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
Turn the TV off/on using the remote control.
When connecting to the yy
yy
Reconnect the RGB/HDMI cable.
PC (RGB/HDMI DVI),
yy
Restart the PC with the TV on.
‘No signal’ or ‘Invalid
Format’ is displayed.
ENGLISH
ENG
MAINTENANCE
38
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
Wireless LAN(AN-WF100) specification
(Only 72LM95**)
Standard
IEEE802.11a/b/g/n
IEEE 802.11b/g/n in Indonesia
IEEE 802.11a/b/g in Russia and Tunisia
Host Interface
USB 2.0
2.400 to 2.483 GHz
Frequency Range
5.150 to 5.250 GHz
5.725 to 5.850 GHz
Security
64/128 bit WEP, WPA, WPA2, TKIP, AES, WPS (PIN, PBC)
802.11a: -72 dBm (54 Mbps)
Sensitivity
802.11b: -84 dBm (11, 5.5, 2, 1 Mbps)
802.11g: -72 dBm (54 Mbps)
802.11n: -64 dBm (20 MHz) / -61 dBm (40 MHz)
802.11a: 14 dBm (54 Mbps)
802.11b: 16.5 dBm (11, 5.5, 2, 1 Mbps)
Output Power
802.11g: 14 dBm (54 Mbps)
802.11n: (2.4 GHz) 13.5 dBm (20 MHz) / 13.5 dBm (40 MHz)
802.11n: (5 GHz) 13.5 dBm (20 MHz) / 13.5 dBm (40 MHz)
802.11a/g: 54 Mbps
Data rate
802.11b: 11 Mbps
802.11n: 300 Mbps (40 MHz)
yy
Because band channel used by the country could be different, the user can not change or adjust the
operating frequency and this product is set for the regional frequency table.
yy
Because output power used by the country could be different, the user can not change or adjust the
operating output power and this product is set for the regional output power table.
SPECIFICATIONS
(Only 47/55/84LM96**, 42/47/55LM86**)
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz
Modulation
CCK / OFDM / MIMO
802.11a: 11 dBm
Output Power
(Typical)
802.11b: 15 dBm
802.11g: 13 dBm
802.11n - 2.4GHz: 13 dBm
802.11n - 5GHz: 13 dBm
802.11a/g: 54 Mbps
Data rate
Antenna Gain
(Typical)
Occupied bandwidth
802.11b: 11 Mbps
802.11n: 300 Mbps
2400 to 2483.5 MHz: -2.5dBi
5150 to 5250 MHz: -2.2dBi
5725 to 5850 MHz: -2.9dBi
802.11a/b/g: HT20
802.11n: HT20/40
yy
Because band channel used by the country could be different, the user can not change or adjust the
operating frequency and this product is set for the regional frequency table.
Bluetooth module (BM-LDS302) specification
Standard
Frequency Range
Output Power (Max.)
Data rate (Max.)
Communication Distance
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
3 Mbps
Line of Open Sight approx. 10 m
ENGLISH
ENG
Wireless LAN module(TWFM-B003D) specification
39
40
SPECIFICATIONS
ENGLISH
ENG
47LM96**
55LM96**
47LM960V-ZB
55LM960V-ZB
With stand (mm)
1053.0 x 684.0 x 302.0
1223.0 x 783.0 x 372.0
Without stand (mm)
1053.0 x 612.0 x 37.9
1223.0 x 708.0 x 38.4
17.0
23.4
MODEL
Dimensions
(W x H x D)
With stand (kg)
Weight
15.3
20.6
Power requirement
Without stand (kg)
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
180 W
210 W
84LM96**
MODEL
Dimensions
(W x H x D)
Weight
84LM960V-ZB
With stand (mm)
2165.0 x 1445.0 x 400.6
Without stand (mm)
2165.0 x 1338.0 x 81.4
With stand (kg)
107.6
Without stand (kg)
84.6
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
270 W
72LM95**
MODEL
Dimensions
(W x H x D)
72LM950V-ZA
With stand (mm)
1694.0 x 1114.0 x 386.0
Without stand (mm)
1694.0 x 1023.0 x 59.9
With stand (kg)
Weight
65.5
Without stand (kg)
52.6
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
470 W
42LM86**
47LM86**
42LM860V-ZB
47LM860V-ZB
With stand (mm)
953.0 x 636.0 x 302.0
1063.0 x 701.0 x 302.0
Without stand (mm)
953.0 x 567.0 x 33.4
1063.0 x 628.0 x 33.4
With stand (kg)
14.3
17.5
Without stand (kg)
12.6
15.8
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
110 W
140 W
MODEL
Dimensions
(W x H x D)
Weight
MODEL
Dimensions
(W x H x D)
Weight
55LM86**
55LM860V-ZB
With stand (mm)
1232.0 x 794.0 x 372.0
Without stand (mm)
1232.0 x 723.0 x 33.6
With stand (kg)
Without stand (kg)
25.0
22.2
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
170 W
SPECIFICATIONS
100.0 mm x 55.0 mm x 5.0 mm
Operating Temperature
Environment
condition
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Satellite Digital TV1
Analogue TV
DVB-T/T2
Television system
PAL/SECAM B/G/D/K,
DVB-C
SECAM L/L’
DVB-S/S2
Programme coverage
VHF: E2 to E12
VHF, UHF
UHF: E21 to E69
C-Band, Ku-Band
CATV: S1 to S20
HYPER: S21 to S47
Maximum number of storable
programmes
External antenna impedance
1 Only satellite models
6,000
1,200
75 Ω
ENGLISH
ENG
CI Module Size
(W x H x D)
41
42
SPECIFICATIONS
ENGLISH
ENG
HDMI/DVI-DTV supported mode
Resolution
720x480
720x576
1280x720
1920x1080
Component port connecting information
Horizontal
Frequency
Vertical
Frequency
(kHz)
(Hz)
31.469
59.94
31.5
60
31.25
50
37.5
50
44.96
59.94
45
60
33.72
33.75
Component
ports on the TV
Video output
ports on DVD
player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
59.94
480i/576i
O
60
480p/576p
O
28.125
50
720p/1080i
O
26.97
23.97
27
24
1080p
O
(50 Hz / 60 Hz only)
33.716
29.976
33.75
30.00
56.25
50
67.43
59.94
67.5
60
SPECIFICATIONS
43
yy
Video, which is input as below media contents is switched into the 3D screen automatically.
yy
The method for 3D digital broadcast may differ depending on the signal environment. If video is not
switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640x480
Horizontal
Frequency
(kHz)
576p
59.94 / 60
HDMI
1080i
1080p
Side by Side(Half), Top & Bottom,
Side by Side(Full)
62.938 / 63
Frame Packing, Line Alternative
31.25
50
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame Packing, Line Alternative
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.50
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
Frame Packing, Line Alternative
31.469 / 31.5
62.5
720p
Playable 3D video format
Side by Side(Half), Top & Bottom,
Side by Side(Full)
31.469 / 31.5
62.938 / 63
480p
Vertical
Frequency
(Hz)
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Line Alternative
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Field Alternative
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Line Alternative
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo)
Signal
Playable 3D video format
Frame Compatible
Side by Side(Half), Top & Bottom
ENGLISH
ENG
3D supported mode
44
SPECIFICATIONS
yy
For models supporting WiDi, you can set the 3D mode in the same way as in RGB (PC) mode.
ENGLISH
ENG
3D supported mode manually
Input
Signal
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
37.50
50
45.00
60
28.12
50
33.75
60
720p
1080i
HDMI-DTV
1080p
HDMI-PC
RGB-PC
27.00
24
28.12
25
33.75
30
56.25
50
67.50
60
1024x768
48.36
1360x768
47.71
67.50
Others
-
1024x768
48.36
1360x768
47.71
1920x1080
67.50
Others
720p
1080i
Component
1080p
-
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Single Frame Sequential,
Row Interleaving, Column Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Single Frame Sequential,
Row Interleaving, Column Interleaving
2D to 3D
60
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
-
-
37.50
50
45.00
60
28.12
50
33.75
60
27.00
24
28.12
25
33.75
30
56.25
50
67.50
60
Others
-
-
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
2D to 3D, Side by Side(Half),
Top & Bottom,
Single Frame Sequential
2D to 3D, Side by Side(Half),
Top & Bottom
60
1920x1080
Playable 3D video format
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Row Interleaving, Column Interleaving
[Photo : Side by Side(Half),
Top & Bottom]
Signal
Playable 3D video format
HD
2D to 3D, Side by Side(Half),
Top & Bottom
SD
2D to 3D
ENGLISH
ENG
(UK only)
Please contact LG first.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Service
Country
0 810 144 131
Service
0900 543 5454
800 187 40
32 15 200255
801 54 54 54
07001 5454
808 78 54 54
810 555 810
031 228 3542
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
8088 5758
0850 111 154
0800 0 54 54
902 500 234
01803 11 54 11
0848 543 543
MODEL
801 11 200 900
0844 847 5454
06 40 54 54 54
8 800 200 7676
0818 27 6955
800 9990
199600099
0 800 303 000
8 820 0071 1111
2255
SERIAL
3220
8 0003 271
8 800 30 800
Trade Mark of the DVB Digital Video
Broadcasting Project (1991 to 1996)
54
0770 54 54 54
800 0071 0005
Download PDF