LG | 55UF695V | LG 49UF695V Owner’s Manual

OWNER’S MANUAL
LED TV*
*LG LED TV applies LCD screen with
LED backlights.
Please read this manual carefully before operating your set
and retain it for future reference.
UB80** UB83**
UB82** UF695*
*MFL68484511*
www.lg.com
P/NO : MFL68484511(1504-REV05)
Printed in Korea
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3LICENSES
33
MAGIC REMOTE FUNCTIONS
3
OPEN SOURCE SOFTWARE
NOTICE INFORMATION
34
34
35
Registering Magic Remote
How to use Magic Remote
Precautions to Take when Using the
Magic Remote
3
EXTERNAL CONTROL DEVICE
SETUP
35
USING THE USER GUIDE
4
SAFETY INSTRUCTIONS
10
- Viewing 3D Imaging (Only 3D models)
12
INSTALLATION PROCEDURE
12
ASSEMBLING AND PREPARING
36MAINTENANCE
12Unpacking
15
Separate purchase
16
Parts and buttons
17
- Using the Joystick button
18
Lifting and moving the TV
19
Setting up the TV
19
- Attaching the stand
21
Mounting on a table
22
Mounting on a wall
23
Tidying cables
24
MAKING CONNECTIONS
24
25
25
26
27
27
28
28
29
29
29
30
30
Antenna connection
Satellite dish connection
HDMI connection
Headphone connection
DVI to HDMI connection
Component connection
Composite connection
MHL connection
Audio connection
- Digital optical audio connection
USB connection
CI module connection
Euro Scart connection
31
REMOTE CONTROL
36
36
36
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
36TROUBLESHOOTING
37SPECIFICATIONS
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you
may be slightly injured or the product may
be damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE INFORMATION /
EXTERNAL CONTROL DEVICE SETUP
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in
this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com.
ENGLISH
LICENSES
3
4
SAFETY INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/or remote control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce
heat
--Near kitchen counters or humidifiers where they can easily be exposed
to steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product
deformation.
yyDo not place the product where it might be exposed to dust.
This may cause a fire hazard.
yyMains Plug is the TV connecting/disconnecting device to AC mains electric
supply. This plug must remain readily attached and operable when TV is in
use.
yyDo not touch the power plug with wet hands. Additionally, if the cord pin is
wet or covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
yyMake sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on earth.)
Otherwise possibility you may be electrocuted or injured.
yyInsert power cable plug completely into wall socket otherwise if not
secured completely into socket, fire ignition may break out.
yyEnsure the power cord does not come into contact with hot objects such
as a heater.
This may cause a fire or an electric shock hazard.
yyDo not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
yyBend antenna cable between inside and outside building to prevent rain
from flowing in.
This may cause water damaged inside the Product and could give an
electric shock.
SAFETY INSTRUCTIONS
yyDo not plug too many electrical devices into a single multiple electrical
outlet.
Otherwise, this may result in fire due to over-heating.
yyDo not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
yyKeep the anti-moisture packing material or vinyl packing out of the reach
of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake,
force the patient to vomit and visit the nearest hospital. Additionally, vinyl
packing can cause suffocation. Keep it out of the reach of children.
yyDo not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
yyDispose of used batteries carefully to ensure that a small child does not
consume them.
Please seek Doctor- Medical Attention immediately if child consumes
batteries.
yyDo not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall Socket while it is
connected to the input terminal on the wall. Additionally, do not touch the
power cable right after plugging into the wall input terminal. You may be
electrocuted. (Depending on model)
yyDo not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling
of the inflammable substances.
yyDo not drop metallic objects such as coins, hair pins, chopsticks or wire
into the product, or inflammable objects such as paper and matches.
Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into
the product, unplug the power cord and contact the service centre.
yyDo not spray water on the product or scrub with an inflammable substance
(thinner or benzene). Fire or electric shock accident can occur.
yyDo not allow any impact, shock or any objects to fall into the unit, and do
not drop anything onto the screen.
You may be injured or the product can be damaged.
yyNever touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
ENGLISH
yyWhen mounting TV onto wall make sure to neatly install and isolate cabling
from rear of TV as to not create possibility of electric shock /fire hazard.
5
6
SAFETY INSTRUCTIONS
ENGLISH
yyNever touch the wall outlet when there is leakage of gas, open the
windows and ventilate.
It may cause a fire or a burn by a spark.
yyDo not disassemble, repair or modify the product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
yyIf any of the following occur, unplug the product immediately and contact
your local service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
yyUnplug the TV from AC mains wall socket if you do not intend to use the
TV for a long period of time.
Accumulated dust can cause fire hazard and insulation deterioration can
cause electric leakage/shock/fire.
yyApparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
yyDo not install this product on a wall if it could be exposed to oil or oil mist.
This may damage the product and cause it to fall.
yyIf water enters or comes into contact with TV, AC adapter or power cord
please disconnect the power cord and contact service centre immediately.
Otherwise, this may result in electric shock or fire.
yyOnly use an authorized AC adapter and power cord approved by LG
Electronics. Otherwise, this may result in fire, electric shock, malfunction
or product deformation.
yyNever Disassemble the AC adapter or power cord.
This may result in fire or electric shock.
CAUTION
yyInstall the product where no radio wave occurs.
yyThere should be enough distance between an outside antenna and power
lines to keep the former from touching the latter even when the antenna
falls.
This may cause an electric shock.
SAFETY INSTRUCTIONS
yyIf you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which may
cause injury.
yyIf you intend to mount the product to a wall, attach VESA standard mounting interface (optional
parts) to the back of the product. When you install the set to use the wall mounting bracket
(optional parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories specified by the manufacturer.
yyWhen installing the antenna, consult with a qualified service technician. If
not installed by a qualified technician, this may create a fire hazard or an
electric shock hazard.
yyWe recommend that you maintain a distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
yyOnly use the specified type of battery.
This could cause damage to the remote control.
yyDo not mix new batteries with old batteries.
This may cause the batteries to overheat and leak.
yyBatteries should not be exposed to excessive heat. For example, keep away from direct Sunlight
, open fireplace and electric heaters.
yyDo not place non-rechargeable batteries in charging device.
yyMake sure there are no objects between the remote control and its sensor.
yySignal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, fluorescent lighting.
If this occurs turn off lighting or darken viewing area.
yyWhen connecting external devices such as video game consoles, make
sure the connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage
the product.
yyDo not turn the product On/Off by plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
ENGLISH
yyDo not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the product
cannot be fully supported.
Otherwise, the product may fall or flip over, which may cause injury or
damage to the product.
7
8
SAFETY INSTRUCTIONS
ENGLISH
yyPlease follow the installation instructions below to prevent the product from
overheating.
--The distance between the product and the wall should be more than
10 cm.
--Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
yyTake care not to touch the ventilation openings when watching the TV for
long periods as the ventilation openings may become hot. This does not
affect the operation or performance of the product.
yyPeriodically examine the cord of your appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact replacement part by an authorized servicer.
yyPrevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard.
yyProtect the power cord from physical or mechanical abuse, such as being
twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the
appliance.
yyDo not press strongly upon the panel with a hand or sharp object such
as nail, pencil or pen, or make a scratch on it, as it may cause damage to
screen.
yyAvoid touching the screen or holding your finger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
yyWhen cleaning the product and its components, unplug the power first and
wipe it with a soft cloth. Applying excessive force may cause scratches or
discolouration. Do not spray with water or wipe with a wet cloth. Never use
glass cleaner, car or industrial shiner, abrasives or wax, benzene, alcohol
etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage
(deformation, corrosion or breakage).
yyAs long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
source even if you turn off this unit by SWITCH.
yyWhen unplugging the cable, grab the plug and unplug it, by pulling at the
plug.
Don’t pull at the cord to unplug the power cord from the power board, as
this could be hazardous.
yyWhen moving the product, make sure you turn the power off first. Then,
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.
SAFETY INSTRUCTIONS
yyContact the service centre once a year to clean the internal parts of the
product.
Accumulated dust can cause mechanical failure.
yyRefer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
yyIf the product feels cold to the touch, there may be a small “flicker” when it
is turned on. This is normal, there is nothing wrong with product.
yyThe panel is a high technology display product with resolution of two
million to six million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does not affect the performance and
reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
yyYou may find different brightness and color of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
yyDisplaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more
hours for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders
of the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated
by plastic thermal contraction due to tempera-ture and humidity. This noise is common for
products where thermal deformation is required. Electrical circuit humming/panel buzzing: A low
level noise is generated from a high-speed switching circuit, which supplies a large amount of
current to operate a product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
yyDo not use high voltage electrical goods near the TV (e.g. electric mosquito-swatter). This may
result in product malfunction.
ENGLISH
yyWhen moving or unpacking the product, work in pairs because the product
is heavy.
Otherwise, this may result in injury.
9
10
SAFETY INSTRUCTIONS
ENGLISH
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 to 15 minute breaks every hour. Viewing 3D contents for a
long period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as
epilepsy, cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly.
Double images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, correct your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until
the symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or
fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
yy Viewing Distance
-- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If
you feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contents for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than
the recommended distance.
Cautions when using the 3D glasses
yy
yy
yy
yy
yy
ake sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
M
Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
Using modified 3D glasses may cause eye strain or image distortion.
Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when
wiping the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them
with chemicals.
ENGLISH
CAUTION
12
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
NOTE
yy
yy
yy
yy
yy
Image shown may differ from your TV.
Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
The available menus and options may differ from the input source or product model that you are using.
New features may be added to this TV in the future.
The TV can be placed in standby mode in order to reduce the power consumption. And the TV
should be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local dealer
where you purchased your product. The illustrations in this manual may differ from the actual product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damage or injuries caused by using unapproved items are not covered by the warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
yy Use a certified cable with the HDMI logo attached.
yy If you do not use a certified HDMI cable, the screen may not display or a connection error may
occur. (Recommended HDMI Cable Types)
--High-Speed HDMI®/TM cable (3 m or less)
--High-Speed HDMI®/TM cable with Ethernet (3 m or less)
ASSEMBLING AND PREPARING
ENERGY AV MODE INPUT
TV
TV
SAVING
SAVING
1
2
3
1
2
4
5
6
4
5
7
8
9
7
8
9
0
FLASHBK
0
FLASHBK
LIST
LIST
3D
3
6
MARK
FAV
MARK
FAV
VOL
ENGLISH
ENERGY AV MODE INPUT
CH
P
A
G
E
VOL
3D
CH
P
A
G
E
MUTE
MUTE
MENU INFO
MENU INFO
Q.MENU
Q.MENU
ENTER
ENTER
BACK
EXIT
L/R SELECT
BACK
EXIT
L/R SELECT
FREEZE
FREEZE
RATIO
RATIO
Remote Control, Batteries
(AAA)
(Depending on model)
The remote control will not be
included for all sales market.
(See p. 31, 32)
Magic Remote, Batteries
(AA)
(Only UB80**, UB82**,
UB83**, UF695*)
(See p. 33)
Owner’s Manual
Power Cord
Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
(Only UB83**)
Cable Holder
(See p. 23)
Stand Body / Stand Base
(Only UB83**-ZB)
(See p. 20)
Stand Base
(Only UB83**-ZG, UF695*-ZA)
(See p. 19)
Cable Managements
2 EA
(Depending on model)
(See p. 23)
m.
13
14
ASSEMBLING AND PREPARING
ENGLISH
Scart Gender Cable
(See p. 30)
Composite Gender
Cable
(See p. 27, 28)
Component Gender
Cable
(See p. 27)
Stand Screws
8 EA, M4 x L20
(Only UB83**-ZB)
(See p. 20)
4 EA, M4 x L20
(Only UB80**, UB82**,
UF695*-ZB)
(See p. 19)
Stand Screws
4 EA, M4 x L21
(Only UB83**-ZG, UF695*-ZA)
(See p. 19)
Ferrite core
(Depending on model)
Stand Base
(Only UB80**, UB82**,
UF695*-ZB)
(See p. 19)
NOTE
How to use the ferrite core (Depending on model)
yy Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable once on the ferrite core. Place the ferrite core close to the TV.
[Cross Section of Ferrite Core]
[to the TV]
[to an External device]
Ferrite core
ASSEMBLING AND PREPARING
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
AG-F***DP
Dual Play Glasses
AG-F***
Cinema 3D Glasses
AN-VC5**
Video Call Camera
LG Audio Device
Compatibility
UB80**
UB82**
UF695*
AN-MR500
Magic Remote
UB83**
AG-F***DP
Dual Play Glasses
•
AG-F***
Cinema 3D Glasses
•
AN-MR500
Magic Remote
•
•
AN-VC5**
Video Call Camera
•
•
LG Audio Device
•
•
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
ENGLISH
Separate purchase
15
16
ASSEMBLING AND PREPARING
ENGLISH
Parts and buttons
C type : UB83**-ZG, UF695*-ZA
A type : UB83**-ZB
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button2
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button2
B type : UB80**, UB82**, UF695*-ZB
Screen
Speakers
Remote control and
Intelligent1 sensors
Power Indicator
Joystick Button2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located behind the TV screen.
ASSEMBLING AND PREPARING
17
Using the Joystick button
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick button
and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick button
and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
Volume
Control
If you place your finger over the joystick button and move it left or
right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up or
down, you can scrolls through the saved programmes you want.
NOTE
yy When your finger over the joystick button and push it to the up, down, left or right, be careful not
to press the joystick button. If you press the joystick button first, you may not be able to adjust the
volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items( , , ,
) moving the joystick button up, down, left or right.
TV off
Turns the power off.
Settings
Accesses the main menu.
Close
Clears on-screen displays and returns to TV viewing.
Input List
Changes the input source.
ENGLISH
NOTE
yy You can set the Power Indicator Light to on or off by selecting OPTION in the main menus.
18
ASSEMBLING AND PREPARING
ENGLISH
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing / bending of frame chassis as it may
damage screen.
yy When handling the TV, be careful not to
damage the protruding joystick button.
ASSEMBLING AND PREPARING
Setting up the TV
19
UB83**-ZG, UF695*-ZA
A stand base
1
Attaching the stand
B stand base
UB80**, UB82**, UF695*-ZB
1
1
A Stand Base
2
B Stand Base
1
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
2
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
2
M4 x L21
4 EA
M4 x L20
4 EA
ENGLISH
Image shown may differ from your TV.
20
ASSEMBLING AND PREPARING
UB83**-ZB
ENGLISH
2
1
Stand Body (L)
Stand Body (R)
Stand Base
1
2
M4 x L20
4 EA
NOTE
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
3
yy Be sure to check the Stand Body (L), (R),
when installing on the stand base.
M4 x L20
4 EA
ASSEMBLING AND PREPARING
21
Securing the TV to a wall
(This feature is not available for all models.)
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
CAUTION
10 cm
m
10 c
10 cm
10 cm
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
yy Make sure that children do not climb on
or hang on the TV.
NOTE
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
ENGLISH
CAUTION
22
ASSEMBLING AND PREPARING
ENGLISH
Mounting on a wall
Wall mount bracket
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the
device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
MSW240
LSW240B
LSW440B
A
B
CAUTION
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
49/55UB83**
49/55UB82**
49/55UF695*
VESA (A x B)
400 x 400
Standard screw M6
Number of
4
screws
Wall mount
LSW440B
bracket
MSW240
Model
60UF695*
VESA (A x B)
400 x 400
Standard screw M6
Number of
4
screws
Wall mount
LSW440B
bracket
42UB82**
40UB80**
40UF695*
200 x 200
M6
4
LSW240B
MSW240
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
NOTE
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ASSEMBLING AND PREPARING
1 Gather and bind the cables with the Cable
Holder.
Image shown may differ from your TV.
(Only UF695*)
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
(Only UB80**, UB82**, UB83**)
Cable Holder
Cable Holder
CAUTION
Cable Management
yy Do not move the TV by holding the cable
holder, as the cable holder may break, and
injuries and damage to the TV may occur.
ENGLISH
Tidying cables
23
24
MAKING CONNECTIONS
ENGLISH
MAKING CONNECTIONS
Antenna connection
This section on MAKING CONNECTIONS mainly
uses diagrams for the UB83**-ZB models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
IN
ANTENNA /
CABLE
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yy In PC mode, some resolution settings
may not work properly depending on the
graphics card.
yy If ULTRA HD content is played on
your PC, video or audio may become
disrupted intermittently depending on
your PC’s performance.
(*Not Provided)
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
yy This TV cannot receive ULTRA HD
(3840 x 2160 pixels) broadcasts directly
because the related standards have not
been confirmed.
MAKING CONNECTIONS
HDMI connection
(4K@60Hz) / DVI IN
IN
13 / 18 V 13 700mA
/ 18 V Max LNB IN
700mA
SatelliteMax
3 (MHL)
DVI IN
(4K@60Hz) /
(Only satellite models)
1 (HDCP 2.2)
2 (ARC)
LNB IN
Satellite
(*Not Provided)
(*Not Provided)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
HDMI
DVD / Blu-Ray / HD Cable Box
/ HD STB / PC
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
ENGLISH
Satellite dish connection
25
26
MAKING CONNECTIONS
ENGLISH
Headphone connection
NOTE
yy It is recommended to use the TV with
the HDMI connection for the best image
quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested
to carry an HD signal up to 1080p and
higher.
yy Supported HDMI Audio format : Dolby
Digital (32 kHz, 44.1 kHz, 48 kHz),
DTS(44.1 kHz, 48 kHz), PCM (32 kHz,
44.1 kHz, 48 kHz, 96 kHz, 192 kHz)
4K @ 50/60 Hz Support Format
Resolution
Frame
rate
(Hz)
Colour Depth /
Chroma Sampling
3840 x 2160p
4096 x 2160p
50.00
59.94
60.00
8 bit / YCbCr 4:2:0
ARC (Audio Return Channel)
yyAn external audio device that supports
SIMPLINK and ARC must be connected
using HDMI (4K @ 60 Hz) / DVI IN 2
(ARC) port.
yyWhen connected with a high-speed
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
OUT
EXT.SPEAKER
/ H/P
(*Not Provided)
Headphone
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.
NOTE
yy AUDIO menu items are disabled when
connecting a headphone.
yy Optical Digital Audio Out is not available
when connecting a headphone.
yy Headphone impedance: 16 Ω
yy Max audio output of headphone: 0.627
mW to 1.334 mW
yy Headphone jack size: 0.35 cm
27
MAKING CONNECTIONS
3 (MHL)
DVI IN
(4K@60Hz) /
Component connection
ENGLISH
DVI to HDMI connection
VIDEO
IN
AV2
IN
AV2
COMPONENT
AUDIO
PR
PB
Y
(4K@60Hz) / DVI IN
/
1 (HDCP 2.2)
2 (ARC)
AV2
YELLOW
(Use the composite
gender cable
provided.)
RED
RED
BLUE
GREEN
RED
RED
BLUE
GREEN
RED
RED
BLUE
WHITE
YELLOW
(*Not Provided)
GREEN
(Use the
component gender
cable provided.)
WHITE
(*Not
Provided)
GREEN
WHITE
L
R
AUDIO
VIDEO
DVD / Blu-Ray / HD Cable Box / HD STB / PC
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
NOTE
yy Depending on the graphics card, DOS
mode may not work if a HDMI to DVI
Cable is in use.
yy When using the HDMI/DVI cable, only
Single link is supported.
DVD / Blu-Ray / HD Cable Box
Transmits analogue video and audio signals
from an external device to the TV. Connect the
external device and the TV with a component
cable(or component gender cable) as shown.
NOTE
yy If cables are not installed correctly, it
could cause this image to display in black
and white or with distorted colours.
28
MAKING CONNECTIONS
AV2
IN
COMPONENT
AUDIO
PR
PB
Y
DVI IN
(4K@60Hz) /
VIDEO
HDD IN
1
2
USB IN
3
MHL connection
3 (MHL)
ENGLISH
Composite connection
AV2
YELLOW
(Use the composite
gender cable provided.)
WHITE
RED
WHITE
RED
YELLOW YELLOW
(*Not
Provided)
Mobile phone
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
NOTE
RED
WHITE
YELLOW
VIDEO
MHL passive cable
(*Not Provided)
L (MONO) AUDIO R
DVD / Blu-Ray /
HD Cable Box / VCR
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with the composite cable as
shown.
yyConnect the mobile phone to the HDMI (4K @
60 Hz) / DVI IN 3 (MHL) port to view the phone
screen on the TV.
yyThe MHL passive cable is needed to connect the
TV and a mobile phone.
yyThis only works for the MHL-enabled phone.
yySome applications can be operated by the
remote control.
yyFor some mobile phones supporting MHL, you can
control with the Magic Remote.
yyRemove the MHL passive cable from the TV when:
-- the MHL function is disabled
-- your mobile device is fully charged in standby
mode
MAKING CONNECTIONS
29
USB IN
3
ENGLISH
USB connection
Audio connection
2
OUT
HDD IN
1
OPTICAL
DIGITAL
AUDIO
HDD
(*Not Provided)
(*Not Provided)
HUB
(*Not Provided)
Digital Audio System
USB
(*Not Provided)
OPTICAL AUDIO IN
You may use an optional external audio system
instead of the built-in speaker.
Digital optical audio connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
NOTE
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
SmartShare menu to use various multimedia files.
NOTE
yy Some USB Hubs may not work. If a USB
device connected using a USB Hub is not
detected, connect it to the USB port on
the TV directly.
yy Connect the external power source if your
USB is needed.
30
MAKING CONNECTIONS
ENGLISH
CI module connection
Euro Scart connection
IN/OUT
(*Not Provided)
(RGB)
(RGB)
AV1
AV 1
(Use the Scart
gender cable
provided.)
(*Not Provided)
View the encrypted (pay) services in digital
TV mode. This feature is not available in all
countries.
NOTE
yy Check if the CI module is inserted into
the PCMCIA CARD SLOT in the right
direction. If the module is not inserted
properly, this can cause damage to the
TV and the PCMCIA card slot.
yy If the TV does not display any video
and audio when CI+ CAM is connected,
please contact to the Terrestrial/Cable/
Satellite Service Operator.
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable
(or Scart gender cable) as shown.
Current
input mode
Output
Type
Digital TV
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
yy When watching digital TV in 3D imaging
mode, only 2D out signals can be output
through the SCART cable. (Only 3D models)
REMOTE CONTROL
31
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA)
matching the
and
ends to the label inside the compartment, and close the
battery cover. To remove the batteries, perform the installation actions in reverse.
or
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor on the TV.
(Depending on model)
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
Q.MENU Accesses the quick menus.
Shows programme guide.
1
2
1 AD By Pressing AD button, audio descriptions function will be
enabled. (Depending on model)
Views the information of the current programme and screen.
1 INFO
(Depending on model)
INPUT Changes the input source.
LIST Accesses the saved programme list.
(Space) Opens an empty space on the screen keyboard. (Depending on model)
Q.VIEW Returns to the previously viewed programme.
Adjusts the volume level.
FAV Accesses your favourite programme list.
Views the information of the current programme and screen.
2 INFO
(Depending on model)
2
Used for viewing 3D video. (Depending on model)
MUTE Mutes all sounds.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
SETTINGS Accesses the main menus.
SMART Accesses the Home menus.
MY APPS Shows the list of Apps.
Teletext buttons(
TEXT / T.OPT) These buttons are used for teletext.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK
3
4
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
3 APP/ Selects the MHP TV menu source. (Only Italy) (Depending on model)
3 AD By Pressing AD button, audio descriptions function will be
enabled. (Depending on model)
REC/ Starts to record and displays record menu. (Only Time Machine Ready
supported model)
LIVE TV Returns to LIVE TV.
Control buttons (
) Controls the Premium contents, Time
MachineReady or SmartShare menus or the SIMPLINK compatible devices
Ready
(USB or SIMPLINK or Time Machine
).
4 Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue)
(
ENGLISH
REMOTE CONTROL
32
REMOTE CONTROL
(Depending on model)
ENGLISH
(POWER) Turns the TV on or off.
SUBTITLE Recalls your preferred subtitle in digital mode.
RATIO
RATIO Resizes an image.
INPUT
TV/
RAD
SUBTITLE
INPUT Changes the input source.
TV/RAD
1.,;@ 2 abc 3 def
4 ghi 5 jkl 6 mno
(Space) Opens an empty space on the screen keyboard.
Q.VIEW Returns to the previously viewed programme.
7pqrs 8 tuv 9wxyz
LIST
0
Adjusts the volume level.
Q.VIEW
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
FAV
P
A
G
E
GUIDE
MUTE
P
MUTE
INFO
MY APPS
INFO
Mutes all sounds.
Scrolls through the saved programmes.
PAGE
SMART
Selects Radio, TV and DTV programme.
LIST Accesses the saved programme list.
Moves to the previous or next screen.
Views the information of the current programme and screen.
SMART Accesses the Home menus.
OK
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
BACK
SETTINGS
EXIT
Selects menus or options and confirms your input.
BACK Returns to the previous level.
1
2
OK
TEXT
T.OPT
LIVE TV
Q.MENU
SETTINGS Accesses the main menus.
EXIT Clears on-screen displays and returns to TV viewing.
REC/
SLEEP
AD
APP/
(
1 Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue)
2 TELETEXT BUTTONS These buttons are used for teletext.
LIVE TV Returns to LIVE TV.
Q.MENU Accesses the quick menus.
) Controls the Premium contents, Time
Control buttons (
MachineReady or SmartShare menus or the SIMPLINK compatible devices (USB or
SIMPLINK or Time MachineReady).
REC/ Starts to record and displays record menu. (Only Time Machine Ready
supported model)
SLEEP Sets the sleep timer.
AD By Pressing AD button, audio descriptions function will be enabled.
APP/ Selects the MHP TV menu source. (Only Italy) (Depending on model)
MAGIC REMOTE FUNCTIONS
33
ENGLISH
MAGIC REMOTE FUNCTIONS
This item is not included for all models.
When the message “Magic Remote battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA)
matching
and
ends to the label inside the compartment, and close the
battery cover. Be sure to point the remote control toward the remote control
sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
(Only UB80**, UB82**, UB83**, UF695*)
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Press the up, down, left or right button
to scroll the menu.If you press ,
, or buttons while the pointer is in
use, the pointer will disappear from the
screen and Magic Remote will operate
like a general remote control. To display
the pointer on the screen again, shake
Magic Remote to the left and right.
Wheel(OK)
Press the center of the Wheel
button to select a menu. You can
change programmes by
using the Wheel button.
Coloured buttons
These access special functions in
some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
Adjusts the volume level.
(BACK)
Returns to the previous level.
(Home)
Accesses the Home menu.
(EXIT to LIVE)
Swiches among broadcast
(antenna) and various inputs.
(Voice recognition)
(Depending on model)
P
Scrolls through the saved
programmes.
/ INPUT
Displays the Screen Remote.
* Accesses the Universal Control
Menu. (Depending on model)
* Pressing and holding the
/ INPUT button will
display a menu to select
an external device that is
connected to the TV.
Used for viewing 3D video.
(Only 3D models)
(MUTE)
Mutes all sounds.
* By Pressing and holding the
button, audio descriptions
function will be enabled.
(Depending on model)
34
MAGIC REMOTE FUNCTIONS
How to deregister the Magic Remote
ENGLISH
Voice recognition(Depending on model)
Network connection is required to use the
voice recognition function.
1.
2.
Press the Voice recognition button.
Speak when the voice display window
appears on the left of the TV screen.
• The voice recognition may fail when
you speak too fast or too slow.
• Use the Magic Remote no further than
10 cm from your face.
• The recognition rate may
vary depending on the user’s
characteristics (voice, pronunciation,
intonation and speed) and the
environment (noise and TV volume).
Registering Magic Remote
BACK
How
HOME
to register
the Magic Remote
To use the Magic Remote, first
pair it with your TV.
(Wheel)
P
1 Put batteries into the Magic
Remote and turn the TV on.
2 Point the Magic Remote at your
TV and press the
Wheel
(OK) on the remote control.
BACK
HOME
P
MY APPS
»»If the TV fails to register the
Magic Remote, try again
after turning the TV off and
back on.
MY APPS
(BACK)
(Home)
Press the
(BACK) and
(Home) buttons at the same time,
for five seconds, to unpair the
Magic Remote with your TV.
»»Pressing and holding the
(EXIT to LIVE) button will let
you cancel and re-register
Magic Remote at once.
How to use Magic Remote
yy Shake the Magic Remote
slightly to the right and left or
press
(Home),
/
INPUT,
buttons to make
the pointer appear on the
screen.
»»The pointer will appear when
you turn the Wheel button.
(Depending on model)
yy If the pointer has not been
used for a certain period
of time or Magic Remote is
placed on a flat surface, then
the pointer will disappear.
yy If the pointer is not
responding smoothly, you can
reset the pointer by moving it
to the edge of the screen.
yy The Magic Remote depletes
batteries faster than a normal
remote due to the additional
features.
MAGIC REMOTE FUNCTIONS / USING THE USER GUIDE
yyUse the remote control within the
specified range (within 10 m).
You may experience communication
failures when using the device outside the
coverage area or if there are obstacles
within the coverage area.
yyYou may experience communication
failures depending on the accessories.
Devices such as a microwave oven
and wireless LAN operate in the same
frequency band (2.4 GHz) as the Magic
Remote. This may cause communication
failures.
yyThe Magic Remote may not work properly
if a wireless router (AP) is within 1 meter
of the TV. Your wireless router should be
more than 1 m away from the TV.
yyDo not disassemble or heat the battery.
yyDo not drop the battery. Avoid avoid
extreme shocks to the battery.
yyInserting the battery the wrong way may
result in explosion.
USING THE USER
GUIDE
User Guide allows you to more easily access the
detailed TV information.
1 Press the
(Home) button to access the
Home menu.
2 Select SETTINGS → SUPPORT.
3 Select User Guide and press Wheel(OK).
SUPPORT
Sound Test
3D Picture Test
Signal Test
Product/Service Info.
Initialization of App
Legal Documents
User Guide
ENGLISH
Precautions to Take when
Using the Magic Remote
35
36
MAINTENANCE / TROUBLESHOOTING
ENGLISH
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result
in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to
,
yy Check if the batteries are still working and properly installed (
to
).
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Automatic Standby (Depending on model) / Sleep Timer /
Off Time is activated in the TIME settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting
to the PC (HDMI/
DVI), ‘No signal’
or ‘Invalid Format’
is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
SPECIFICATIONS
ENGLISH
SPECIFICATIONS
Wireless module (LGSBW41) specification
Wireless LAN
Standard
IEEE 802.11a/b/g/n
Frequency Range
Output Power
(Max.)
2400 to 2483.5 MHz
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
802.11a: 13 dBm
802.11b: 15 dBm
802.11g: 14 dBm
802.11n - 2.4 GHz: 16 dBm
802.11n - 5 GHz: 16 dBm
Bluetooth
Standard
Bluetooth Version 3.0
Frequency Range
2400 to 2483.5 MHz
Output Power
(Max.)
10 dBm or lower
yy Because band channel used by the country could be different, the user can not change or adjust
the operating frequency and this product is set for the regional frequency table.
yy This device should be installed and operated with minimum distance 20 cm between the
device and your body. And this phrase is for the general statement for consideration of user
environment.
0197
0197
37
38
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
ENGLISH
42UB82**
49UB82**
42UB820V-ZG
42UB820V-ZH
49UB820V-ZG
49UB820V-ZH
With stand (mm)
951 x 604 x 218
1093 x 684 x 248
Without stand (mm)
MODELS
Dimensions
(W x H x D)
951 x 569 x 37.3
1093 x 646 x 38.2
With stand (kg)
11.8
18
Without stand (kg)
11.5
17.5
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
120 W
180 W
Weight
55UB82**
40UB80**
55UB820V-ZG
55UB820V-ZH
40UB800V-ZA
With stand (mm)
1233 x 766 x 248
900 x 568 x 217
Without stand (mm)
1233 x 727 x 37.8
900 x 529 x 48.0
MODELS
Dimensions
(W x H x D)
With stand (kg)
21
10.9
20.5
10.6
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
190 W
100 W
Weight
Without stand (kg)
49UB83**
MODELS
Dimensions
(W x H x D)
49UB830V-ZG
49UB836V-ZG
49UB830V-ZB
With stand (mm)
1093 x 689 x 242
1093 x 684 x 248
Without stand (mm)
1093 x 646 x 38.2
1093 x 646 x 38.2
With stand (kg)
18.2
18
Without stand (kg)
17.5
17.5
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
180 W
180 W
Weight
55UB83**
MODELS
Dimensions
(W x H x D)
55UB830V-ZB
55UB830V-ZG
55UB836V-ZG
With stand (mm)
1233 x 766 x 260
1233 x 766 x 248
Without stand (mm)
1233 x 727 x 37.8
1233 x 727 x 37.8
With stand (kg)
21.2
21
Without stand (kg)
20.5
20.5
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
190 W
190 W
Weight
SPECIFICATIONS
55UF695*
49UF695V-ZA
49UF6959-ZA
55UF695V-ZA
55UF6959-ZA
Dimensions
(W x H x D)
With stand (mm)
1093 x 684 x 248
1233 x 766 x 248
Without stand (mm)
1093 x 646 x 38.2
1233 x 727 x 37.8
18
21
With stand (kg)
Weight
Without stand (kg)
17.5
20.5
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
180 W
190 W
60UF695*
40UF695*
60UF695V-ZA
60UF6959-ZA
40UF695V-ZB
40UF6959-ZB
With stand (mm)
1341 x 836 x 271
900 x 568 x 217
Without stand (mm)
MODELS
Dimensions
(W x H x D)
1341 x 788 x 39.1
900 x 529 x 48
With stand (kg)
26.5
10.9
Without stand (kg)
25.8
10.6
Power requirement
AC 100-240 V ~ 50/60 Hz
AC 100-240 V ~ 50/60 Hz
Power consumption
200 W
100 W
Weight
CI Module Size (W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
0 °C to 40 °C
Operating Temperature
Environment
condition
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
Analogue TV
Television system
DVB-T/T2
DVB-C
DVB-S/S2
PAL/SECAM B/G/I/D/K
SECAM L/L’
Programme coverage
VHF, UHF
C-Band, Ku-Band
VHF: E2 to E12, UHF : E21
to E69, CATV: S1 to S20,
HYPER: S21 to S47
Maximum number of
storable programmes
DVB-S/S2 : 6,000
DVB-T/T2/C & Analogue TV : 1,500
External antenna impedance
75 Ω
ENGLISH
49UF695*
MODELS
39
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
LG Customer Information Centre
Country
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Country
Service
Service
0 810 144 131
0900 543 5454
015 200 255
800 187 40
0032 15 200255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
3220
963 05 05 00
0770 54 54 54
54
01806 11 54 11
(0,20€ pro Anruf
aus dem Festnetz der
DTAG; Mobilfunk: max.
0,60€ pro Anruf.)
MODEL
SERIAL
Latvija
0848 543 543
801 11 200 900,
210 4800 564
0344 847 5454
06 40 54 54 54
800 9990
01 686 9454
0 800 303 000
199600099
8 820 0071 1111
8 8000 805 805,
2255(GSM)
80200201
8 800 120 2222
8 800 200 7676
880008081
Türkiye
444 6 543
0-800-805-8050
Slovenija
080 543 543
Download PDF