LG | 60PH670V | LG 50PH670V Owner’s Manual

Printing specification
Drawn
Checked
Approved
Signature
Bohwa.Kim
Yena.Park
Jongok.kim
MMM/DD/YYYY
FEB/26/2013
FEB/26/2013
FEB/26/2013
1. Model Description
Model name
:
50PH670S-ZA
Brand name
:
LG
Part number
2nd, 3rd Suffix
:
EK
Product name
:
PH670S
(Revision number)
:
MFL67714603
(1302-REV00)
2. Printing Specification
1. Trim size (Format)
:
182 mm x 257 mm (B5)
• Cover
:
1 Color (Black)
• Inside
:
1 Color (Black)
• Cover
:
Uncoated, wood-free paper 60 g/㎡
• Inside
:
Uncoated, wood-free paper 60 g/㎡
4. Printing method
:
Off set
5. Bindery
:
Saddle stitching
6. Language
:
ENG
7. Number of pages
:
40
2. Printing colors
3. Stock (Paper)
“This part contains Eco-hazardous substances (Pb, Cd, Hg, Cr6+, PBB, PBDE, etc.) within LG standard level,
N
O
T
E
Details should be followed Eco-SCM management standard[LG(56)-A-2524].
Especially, Part should be followed and controlled the following specification.
(1) Eco-hazardous substances test report should be submitted when Part certification test and First Mass Production.
(2) Especially, Don’t use or contain lead(Pb) and cadmium(Cd) in ink.
3. Origin Notification
LGEAK
:
Printed in Kazakhstan
LGEKR :
Printed in Korea
LGERS :
Printed in Mexico
LGEAZ
:
Printed in Brazil
LGEMA :
Printed in Poland
LGESY
:
Printed in China
LGEEG :
Printed in Egypt
LGEMX :
Printed in Mexico
LGETH
:
Printed in Thailand
LGEIL
:
Printed in India
LGEND :
Printed in China
LGEVN :
Printed in Vietnam
LGEIN
:
Printed in Indonesia
LGERA :
Printed in Russia
LGEWR :
Printed in Poland
4. Changes
10
9
8
7
6
5
4
3
2
1
Rev. Number
MMM/DD/YYYY Signature
ECO Number
Change Contents
Part number
Pagination sheet
:
(Revision number)
Total pages
40 pages
Back
(ENG)
P/NO.
(1302-REV00)
:
Front
MFL67714603
2
…
…
…
…
39
OWNER’S MANUAL
PLASMA TV
Please read this manual carefully before operating
your set and retain it for future reference.
PH47**
PH67**
PH66**
P/NO : MFL67714603 (1302-REV00)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
3
LICENSES
33
MAINTENANCE
3
OPEN SOURCE SOFTWARE NOTICE
33
33
33
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
4
SAFETY INSTRUCTIONS
33
TROUBLESHOOTING
10
- Viewing 3D Imaging (Only 3D models)
12
INSTALLATION PROCEDURE
34
EXTERNAL CONTROL DEVICE
SETUP
12
ASSEMBLING AND PREPARING
12
15
16
17
18
18
20
21
22
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Tidying cables
34
SPECIFICATIONS
23
MAKING CONNECTIONS
23
23
24
24
25
25
26
26
26
27
27
28
Antenna Connection
Satellite dish Connection
HDMI Connection
DVI to HDMI Connection
Component Connection
Composite Connection
MHL Connection
Audio Connection
- Digital optical audio connection
USB Connection
CI module Connection
Euro Scart Connection
29
REMOTE CONTROL
30
MAGIC REMOTE CONTROL
FUNCTIONS
31
31
31
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
32
USING THE USER GUIDE
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
y Do not place the TV and/or remote control in the following environments:
- A location exposed to direct sunlight
- An area with high humidity such as a bathroom
- Near any heat source such as stoves and other devices that produce heat
- Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
- An area exposed to rain or wind
- Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
y Do not place the product where it might be exposed to dust.
This may cause a fire hazard.
y Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.
This plug must remain readily attached and operable when TV is in use.
y Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
y Make sure to connect Mains cable to compliant AC mains socket with Grounded
earth pin. (Except for devices which are not grounded on earth.) Otherwise
possibility you may be electrocuted or injured.
y Insert power cable plug completely into wall socket otherwise if not secured
completely into socket, fire ignition may break out.
y Ensure the power cord does not come into contact with hot objects such as a
heater.
This may cause a fire or an electric shock hazard.
y Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
y Bend antenna cable between inside and outside building to prevent rain from
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
y When mounting TV onto wall make sure to neatly install and isolate cabling from
rear of TV as to not create possibility of electric shock /fire hazard.
SAFETY INSTRUCTIONS
y Do not drop the product or let it fall over when connecting external devices.
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
y Keep the anti-moisture packing material or vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
y Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
y Dispose of used batteries carefully ensure that a small child does not consume
them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
y Do not insert any metal objects/conductors (like a metal chopstick/cutlery/
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.
You may be electrocuted.
(Depending on model)
y Do not put or store inflammable substances near the product.
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
y Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
y Do not spray water on the product or scrub with an inflammable substance (thinner
or benzene). Fire or electric shock accident can occur.
y Do not allow any impact, shock or any objects to fall into the unit, and do not drop
anything onto the screen. You may be injured or the product can be damaged.
y Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
y Never touch the wall outlet when there is leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
y Do not plug too many electrical devices into a single multiple electrical outlet.
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the TV for
yy
a long period of time. Accumulated dust can cause fire hazard and insulation
deterioration can cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult with a qualified service technician. If not
yy
installed by a qualified technician, this may create a fire hazard or an electric shock
hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight ,
yy
open fireplace and electric heaters .
Do not place non-rechargeable batteries in charging device.
yy
Make sure there are no objects between the remote control and its sensor.
yy
Signal from Remote Control can be interrupted due to external/internal lighting eg
yy
Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it, as it may cause damage to screen.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary or permanent distortion/damage to
screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at the plug.
yy
Don’t pull at the cord to unplug the power cord from the power board, as this could
be hazardous.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service centre once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and color of the panel depending on your viewing
yy
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 SAFETY INSTRUCTIONS
ENGLISH
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double
images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the
symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
� Viewing Position
-- Face the center of the screen at eye level with the head looking straight ahead. Otherwise, you may
not be able to view 3D contents properly.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 5 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
� Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
� Using modified 3D glasses may cause eye strain or image distortion.
� Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
� The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
yy When watching 3D videos under fluorescent lights or with three wave length lamps, you may experience
the screen blinking. When this occurs, turn the light off or turn it down.
yy Other electronic or communication devices should be turned off or put away from the TV because it can
cause interference and prevent the 3D function from working properly.
yy When you watch TV lying down, 3D images may look darker or invisible.
ENGLISH
CAUTION
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1
2
3
4
Open the package and make sure all the accessories are included.
Attach the stand to the TV set.
Connect an external device to the TV set.
Make sure the network connection is available.
You can use the TV network functions only when the network connection is made. (Only LAN PORT
model)
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damage or injuries caused by using unapproved items are not covered by the warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
ASSEMBLING AND PREPARING
13
ENERGY AV MODE INPUT
ENGLISH
TV
SAVING
1
2
3
4
5
6
7
BACK
LIST
8
9
0
FLASHBK
SMART
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
ENTER
BACK
/Q.MENU
Q.MENU
P
EXIT
L/R SELECT
FREEZE
RATIO
Remote Control,
Batteries (AAA)
(Only 42/50PH47**,
50/60PH66**)
(See p. 29)
Magic Remote
Control, Batteries
(AA)
(Only 50/60PH67**)
(See p. 30)
Owner’s manual
Ferrite core
(Depending on model)
(See p. 14)
Power Cord
Power Cord Holder
(Depending on model)
(See p. 22)
Protection Cover
(Only 50PH47**,
50PH67**, 50PH66**)
(See p. 19)
Desk-mount Screw
1EA
(Only 42PH47**)
(See p. 20)
x7
M4 x 14
Screw for assembly
(Only 42PH47**)
(See p. 18)
x7
M5 x 16
Screw for assembly
(Only 50PH47**,
50/60PH67**,
50/60PH66**)
(See p. 18)
Stand Body / Stand
Base
(See p. 18)
14 ASSEMBLING AND PREPARING
ENGLISH
NOTE
The items supplied with your product may vary depending on the model.
yy
Product specifications or contents of this manual may be changed without prior notice due to upgrade
yy
of product functions.
How to use the ferrite core
1 Use the ferrite core to reduce the electromagnetic interference in the power cable.
Wind the power cable on the ferrite core once. Place the ferrite core close to the TV and a wall plug.
[to the TV]
[to a wall plug]
(Black)
[Cross Section of
Ferrite Core]
[Figure 1]
2 Use the ferrite core to reduce the electromagnetic interference in the cable.
Place the ferrite core close to the TV.
Wind the component Y, Pb, Pr, L, R cable on the ferrite core once.
[to the TV]
[to an External device]
10 mm(+ / - 5 mm)
[Figure 2-1]
Gather and bind the component Y, Pb, Pr, L, R and scart cable with the ferrite core.
[to an External device]
[to the TV]
(Black)
[Cross Section of
Ferrite Core]
10 mm(+ / - 5 mm)
[Figure 2-2]
Wind the PC audio cable on the ferrite core once.
[to an External device]
[to the TV]
10 mm(+ / - 5 mm)
[Figure 2-3]
3 Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN
cable once on the ferrite core B and thrice on the ferrite core A. Place the ferrite core close to
the TV and an External device.
A (Gray) B (Gray)
[to the TV]
B
A
A
[Figure 3]
For an optimal connection, HDMI cables and USB
yy
devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that
supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
[to an External
device]
[Cross Section of
Ferrite Core]
*A
*B
10 mm
18 mm
ASSEMBLING AND PREPARING
15
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
BACK
SMART
/Q.MENU
P
AG-S3**
3D Glasses
AN-VC4**
Video call camera
AN-TD200
Touch Pen Dongle
LG Audio Device
AN-WF100
Wi-Fi Dongle
Touch
Home
AN-MR400
Magic Remote
AN-TP300
Touch Pen, Cradle
With the Touch Pen, you can use the TV as a touch
monitor with or without connecting it to your PC.
You need to purchase the Touch Pen (including the
cradle) together with the dongle.
Compatibility
PH47**, PH66**
PH67**
AG-S3**
3D Glasses
•
•
AN-MR400
Magic Remote
•
•
AN-VC4**
Video call camera
•
•
AN-WF100
Wi-Fi Dongle
•
AN-TP300
Touch Pen, Cradle
•
•
AN-TD200
Touch Pen Dongle
•
•
LG Audio Device
•
•
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ENGLISH
Separate purchase
16 ASSEMBLING AND PREPARING
ENGLISH
Parts and buttons
Screen
Speakers
Buttons
Remote control sensor
Power indicator
Button
Description
Turns the power on or off.
Selects the highlighted menu option or confirms an input
S
Accesses the main menus, or saves your input and exits the menus.
Changes the input source
H
H
Adjusts the volume level.
Scrolls through the saved programmes.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ENGLISH
Lifting and moving the TV
17
18 ASSEMBLING AND PREPARING
ENGLISH
Setting up the TV
3
Image shown may differ from your TV.
Attaching the stand
1
Only 50PH47**, 50/60PH67**,
50/60PH66**
3 EA
M5 x 16
Only 42PH47**
3 EA
M4 x 14
Only 50PH47**,
50/60PH67**,
50/60PH66**
4 EA
Stand Body
M5 x 16
Front
Only 42PH47**
4 EA
M4 x 14
Stand Base
2
ASSEMBLING AND PREPARING
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
y
y Make sure that the screws are inserted
correctly and fastened securely. If they are
not fastened securely enough, the TV may
tilt forward after being installed. Do not use
too much force and over tighten the screws;
otherwise screw may be damaged and not
tighten correctly.
1
NOTE
yy When installing the wall mounting bracket,
use the Protection Cover.
yy This will protect the opening from
accumulating dust and dirt.
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
4 EA
M5 x 16
2
Protection
cover
2
1 EA
M5 x 16
1
ENGLISH
To detach the stand
(Only 50PH47**, 50PH67**, 50PH66**)
19
20 ASSEMBLING AND PREPARING
ENGLISH
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Adjusting the angle of the TV to suit view
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
20˚
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
CAUTION
yy When adjusting the angle of the product, watch
out for your fingers.
-- Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
20
20
Securing the TV to a wall
(This feature is not available for all models.)
Securing the TV to a table
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
Mount the TV on a table, and then insert and
tighten the supplied screw on the rear of the stand.
(Only 42PH47**)
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
ASSEMBLING AND PREPARING
21
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
42/50PH47**
50/60PH67**
50/60PH66**
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws 4
Wall mount
PSW420BX
bracket
Model
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
A
B
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ENGLISH
Separate purchase(Wall Mounting Bracket)
CAUTION
22 ASSEMBLING AND PREPARING
ENGLISH
Tidying cables
Install the Power Cord Holder and Power Cord.
It will help prevent the power cable from being
removed by accident. Use Cable Holder to
neatly secure and position cables together.
Position the LAN Cable as shown to reduce the
electromagnetic interference wave.
(Only 42PH47**)
Cable holder
Power cord holder
(Depending on model)
(Only 50PH47**, 50/60PH67**, 50/60PH66**)
Cable holder
Power cord holder
(Depending on model)
CAUTION
yy Do not move the TV by holding the cable
holder and power cable holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
MAKING CONNECTIONS
Antenna Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
This section on MAKING CONNECTIONS mainly
uses diagrams for the 50/60PH67** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
Wall Antenna
Socket
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital,Dolby Digital Plus, HE-AAC
Satellite dish Connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
Satellite Dish
LNB IN
Satellite
13/18 V
700 mA Max
ENGLISH
MAKING
CONNECTIONS
23
24 MAKING CONNECTIONS
IN 3(MHL)
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
DVI to HDMI Connection
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
IN (ARC)
IN 2(PC)
1
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI IN(ARC)1 port.
When connected with a high-speed
yy
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
IN 3(MHL)
IN 2(PC)
ENGLISH
HDMI Connection
AUDIO IN (PC)
L/MONO
1
(*Not Provided)
RED
HDMI
WHITE
DVD / Blu-Ray / PC
HD Cable Box / HD STB
IN (ARC)
(*Not
Provided)
(*Not Provided)
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby
Digital, DTS, PCM (Up to 192 KHz, 32k/44.1
k/48k/88k/96k/176k/192k)
AUDIO OUT
DVI OUT
DVD / Blu-Ray / HD Cable Box / PC
NOTE
yy Depending on the graphics card, DOS mode
may not work if a HDMI to DVI Cable is in use.
yy When using the HDMI/DVI cable, only Single
link is supported.
MAKING CONNECTIONS
25
Composite Connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
AUDIO IN (PC)
AUDIO IN (PC)
AV IN 2
AV IN 2
COMPONENT
IN
COMPONENT
IN
L/MONO
RED
WHITE
RED
BLUE
GREEN
L( MONO)
RED
VIDEO
WHITE
YELLOW
AUDIO
AUDIO
R
DVD / Blu-Ray / HD Cable Box
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
VCR / DVD / Blu-Ray / HD Cable Box
RED
WHITE
YELLOW
RED
WHITE
RED
BLUE
GREEN
(*Not Provided)
(*Not Provided)
VIDEO
L/MONO
ENGLISH
Component Connection
26 MAKING CONNECTIONS
Audio Connection
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
You may use an optional external audio system
instead of the built-in speaker.
Digital optical audio connection
IN 3(MHL)
ENGLISH
MHL Connection
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
MHL passive cable
(*Not Provided)
Mobile phone
(*Not Provided)
NOTE
Connect the mobile phone to the HDMI IN 3
yy
(MHL) port to view the phone screen on the
TV.
The MHL passive cable is needed to connect
yy
the TV and a mobile phone.
This only works for the MHL-enabled phone.
yy
Some applications can be operated by the
yy
remote control.
For some mobile phones supporting MHL,
yy
you can control with the magic remote
control.
OPTICAL AUDIO IN
Digital Audio System
NOTE
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
MAKING CONNECTIONS
27
CI module Connection
Connect a USB storage device such as a USB
flash memory, external hard drive, or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
View the encrypted (pay) services in digital TV
mode. This feature is not available in all countries.
n
(Only 50/60PH67**, 50/60PH66**)
(*Not Provided)
1
USB IN
1
USB IN
USB IN 3
USB
or
HDD IN
USB IN 2
HDD IN
HUB
HDD
(*Not Provided)
(Only 42/50PH47**)
HUB
HDD
(*Not Provided)
NOTE
yy Connect the external power source if your USB
is needed.
yy Some USB Hubs may not work. If a USB device
connected using a USB Hub is not detected,
connect it to the USB port on the TV directly.
HDD IN
HDD IN
or
yy Check if the CI module is inserted into the
PCMCIA card slot in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
yy If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Terrestrial/Cable/Satellite
Service Operator.
USB IN 2
USB
NOTE
USB IN 1
USB IN 2
(*Not Provided)
USB IN 1
USB IN 2
USB IN 3
(*Not Provided)
ENGLISH
USB Connection
28 MAKING CONNECTIONS
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown.
AV 1
IN / OUT
ENGLISH
Euro Scart Connection
(*Not Provided)
AUDIO / VIDEO
Output
Type
Current
input mode
Digital TV
Analogue TV, AV
Component
HDMI
AV1
(TV Out1)
Digital TV
Analogue TV
X
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal shielded.
yy When watching digital TV in 3D imaging mode, only
2D out signals can be output through the SCART
cable.(Only 3D models)
REMOTE CONTROL
29
This item is not included for all models.
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
RATIO
(User Guide) Sees user-guide.
RATIO Resizes an image.
INPUT Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
LIST Accesses the saved programme list.
(Space) Opens an empty space on the screen keyboard.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
Used for viewing 3D video.
MUTE
Mutes all sounds.
+
- Adjusts the volume level.
ꕌPꕍ Scrolls through the saved programmes or channels.
PAGE Moves to the previous or next screen.
INPUT
TV/
RAD
1
.,;@
abc
3
def
ghi
5
jkl
6
mno
7
pqrs
8
tuv
9
wxyz
LIST
0
[
4
2
Q.VIEW
FAV
P
MUTE
INFO
SMART
MY APPS
OK
BACK
GUIDE
EXIT
T.OPT
Q.MENU
1
2
SUBTITLE
TEXT
LIVE TV
Time Machine
REC
SETTINGS
AD
APP/
P
A
G
E
INFO
Views the information of the current programme and screen.
SMART
Accesses the Smart Home menus.
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through menus or options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
GUIDE Shows programme guide.
EXIT Clears all on-screen displays and return to TV viewing.
1 Colour buttons These access special functions in some menus.
( : Red,
: Green,
: Yellow,
: Blue)
Q. MENU Accesses the quick menus.
LIVE TV Return to LIVE TV.
Control buttons (
) Controls the Premium contents, Time
Machine or Smart Share menus or the SIMPLINK compatible devices
(USB or SIMPLINK or Time Machine).
II (FREEZE) Freezes the current frame while using the TV, AV,
Component, or HDMI input source.
REC Start to record and display record menu.
SETTINGS Accesses the main menus.
AD Switches the Audio Description On or Off.
APP/ Select the MHP TV menu source. (Depending on model)
2 TELETEXT BUTTONS These buttons are used for teletext.
ENGLISH
REMOTE CONTROL
30 MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
MAGIC REMOTE CONTROL FUNCTIONS
This item is not included for all models.
When the message “Magic Remote Control battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation
button while moving the pointer
on the screen, the pointer
disappears, and the Magic
Remote Control works as a
regular remote control.
To display the pointer again,
shake the Magic Remote
Control from side to side.
BACK
SMART
/Q.MENU
P
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
SMART
Accesses the Smart Home menu.
Voice recognition
(Depending on model)
/Q.MENU
Accesses the quick menus.
Accesses the Universal Control.
+
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
(MUTE)
Mutes all sounds.
Used for viewing 3D video.
Voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation
and speed) and the environment (noise and TV volume).
1.
2.
•
•
Press the Voice recognition button.
Speak when the voice display window appears on the left of the TV screen.
The voice recognition may fail when you speak too fast or too slow.
Use the Magic remote control no further than 10 cm from your face.
Registering Magic Remote
Control
11-1 Brief Info Title Test...
31
Info.
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
BACKto register
HOME
How
the Magic Remote Control
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
complete registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK
and SMART buttons
together for 5 seconds to
reset, then register it by
following “How to register the
Magic Remote Control” above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use Magic Remote
Control
1 If the pointer disappears, move
the remote control slightly
to left or right. Then, it will
automatically appear on the
screen.
»»If the pointer has not been
used for a certain period of
time, it will disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the remote control at your TV
then move it left, right, up or
down.
»»If the pointer does not work
properly, leave the remote
control for 10 seconds then
use it again.
More
1
If you press Wheel(OK) on the Magic
Remote Control, the following screen
appears.
Shows information about the current
programme and screen.
2 You can select My Apps Menu.
Precautions to Take when
Using the Magic Remote
Control
Use the remote control within the maximum
yy
communication distance (10 m). Using the
remote control beyond this distance, or
with an object obstructing it, may cause a
communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
The Magic Remote Control may be damaged
yy
or may malfunction if it is dropped or receives
a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
ENGLISH
rol.
MAGIC REMOTE CONTROL FUNCTIONS
32 USING THE USER GUIDE
ENGLISH
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the SMART button to access the Smart
Home menu.
2 Select User Guide and press Wheel(OK).
OPTION > TO set language
1
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language
Audio Language
Subtitle
Language
Selects a language for the display text.
[In Digital Mode Only]
When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital Mode Only]
Use the Subtitle function when two or more subtitle
languages are broadcast.
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
2
Try Now
Close
User Guide

User Guide
NOTE
yy You can also access the User Guide by
pressing (User Guide) in the remote
control.
1
User Guide
3
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
To set language
OPTION
To set country
LG SMART Function
Disabled Assistance
Advanced Function
Information
2
To set Magic Remote Control
4
Index
5
Online User Guide
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍ to move between pages.
4
Allows to browse the description of the
function you want from the index.
5
Provides the detailed information on the
functions of LG Smart TV when the Internet
is connected.
(It may not be available depending on the
country/language).
1
Shows the description of the selected menu.
You can use ꕌ/ꕍto move between pages.
2
Moves to the selected menu directly from the
User Guide.
MAINTENANCE / TROUBLESHOOTING
33
ENGLISH
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to ,
to
yy Check if the batteries are still working and properly installed (
No image display and
no sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after 15
minutes of inactivity.
When connecting to
the PC (HDMI DVI),
‘No signal’ or ‘Invalid
Format’ is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
).
34 EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
To obtain the external control device setup information, please visit www.lg.com
SPECIFICATIONS
(Only 50/60PH67**)
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
802.11a: 11 dBm
802.11b: 14 dBm
Output Power
802.11g: 10.5 dBm
(Max.)
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth module (BM-LDS401) specification
Standard
Bluetooth Version 3.0
Frequency Range
2400 ~ 2483.5 MHz
Output Power (Max.)
10 dBm or lower
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
(Only 42/50PH47**, 50/60PH66**)
Bluetooth module (BM-LDS401) specification
Standard
Frequency Range
Output Power (Max.)
Bluetooth Version 3.0
2400 ~ 2483.5 MHz
10 dBm or lower
SPECIFICATIONS
42PH47**
50PH47**
42PH470U-ZD
42PH470R-ZD
42PH4707-ZD
50PH470U-ZD
50PH470R-ZD
50PH4707-ZD
983.6 x 650.3 x 250.0
1168.0 x 755.4 x 292.7
983.6 x 595.6 x 57.0
19.6
1168.0 x 698.6 x 57.0
25.4
18.4
24.0
50PH67**
60PH67**
50PH670S-ZA
50PH670S-ZD
50PH670V-ZD
50PH672V-ZA
50PH672V-ZC
50PH672V-ZD
50PH6708-ZA
50PH6708-ZD
60PH670S-ZA
60PH670S-ZD
60PH670V-ZD
60PH672V-ZA
60PH672V-ZC
50PH672V-ZD
60PH6708-ZA
60PH6708-ZD
1168.0 x 755.4 x 292.7
1386.8 x 874.0 x 340.0
1168.0 x 698.6 x 57.0
1386.8 x 821.7 x 57.0
With stand (kg)
26.1
37.7
Without stand (kg)
24.7
34.5
50PH66**
60PH66**
50PH660S-ZA
50PH660V-ZA
50PH6608-ZA
60PH660S-ZA
60PH660V-ZA
60PH6608-ZA
1168.0 x 755.4 x 292.7
1386.8 x 874.0 x 340.0
1168.0 x 698.6 x 57.0
1386.8 x 821.7 x 57.0
With stand (kg)
26.1
37.7
Without stand (kg)
24.7
34.5
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
With stand (kg)
Weight
Without stand (kg)
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
Weight
MODELS
Dimensions With stand (mm)
(W x H x D) Without stand (mm)
Weight
ENGLISH
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
35
36 SPECIFICATIONS
ENGLISH
CI Module Size (W x H x D)
100.0 mm x 55.0 mm x 5.0 mm
Operating
Temperature
Environment
condition
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage
Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
Analogue TV
Television system
DVB-T(*DVB-T/T2)
DVB-C
DVB-S/S2
PAL/SECAM B/G/I/D/K
SECAM L/L’
Programme coverage
VHF, UHF
C-Band, Ku-Band
VHF: E2 to E12, UHF : E21 to
E69, CATV: S1 to S20, HYPER:
S21 to S47
Maximum number of
storable programmes
DVB-S/S2 : 6,000
DVB-T/T2/C & Analogue TV : 1,500
External antenna impedance 75 Ω
* : Only DVB-T2 support models
SPECIFICATIONS
Component port connecting information
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
HDMI/DVI-PC supported mode
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
800x600
37.879
60.31
1024x768
48.363
60.00
1360x768
47.712
60.015
1280x1024
63.981
60.020
1920x1080
67.5
60.00
(Only 50/60PH67**, 50/60PH66**)
Component ports on
the
TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
ENGLISH
HDMI/DVI-DTV supported mode
37
38 SPECIFICATIONS
ENGLISH
3D supported mode
yyVideo, which is input as HDMI, USB, DLNA, is switched into the 3D screen automatically. (This function
does not support all of the 3D video format. The specific 3D video format is not switched into the 3D screen
automatically. )
yy
The method for 3D digital broadcast may differ depending on the signal environment. If video is not
switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640 X 480
480p
576p
720p
HDMI
1080i
1080p
Horizontal
Vertical
Frequency (kHz) Frequency (Hz)
31.469 / 31.5
62.938 / 63
31.469 / 31.5
59.94 / 60
62.938 / 63
31.25
62.5
50
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.432 / 67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.72 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
Playable 3D video format
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Field Alternative
Top & Bottom,
Side by Side(Half), Side by Side(Full)
Frame Packing, Line Alternative
Top & Bottom, Side by Side(Half)
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo), JPS(Photo)
Signal
Playable 3D video format
Frame Compatible
Side by Side(Half), Top & Bottom
SPECIFICATIONS
39
Signal
Input
Resolution
Horizontal
Frequency
(kHz)
Verticla
Frequency
(Hz)
Playable 3D video format
DTV
HD / SD
-
-
ATV(CVBS/SCART)
SD
-
-
Component
HD / SD
-
-
1024X768
48.36
2D to 3D, Side by Side(Half),
Top & Bottom
1360X768
47.71
60
2D to 3D, Side by Side(Half),
Top & Bottom,
Checker Board, Frame
Sequential, Row Interleaving,
Column Interleaving
HDMI-PC
1920X1080
67.5
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
480P
31.5
60
576P
31.25
50
37.5
50
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row
Interleaving, Column
Interleaving
720p
1080i
HDMI-DTV
1080p
Under 704x480
USB ,DLNA
(Movie)
USB, DLNA
(Photo)
Miracast/Widi
45
60
28.12
50
33.75
60
27
24
28.12
25
33.75
30
56.25
50
67.5
60
-
-
2D to 3D
2D to 3D, Side by Sied(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board,
Frame Sequential, Row
Interleaving, Column
Interleaving
Over 704x480
interlaced
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
Over 704x480
progressive
-
50 / 60
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving, Frame Sequential
Over 704x480
progressive
-
others
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board,
Row Interleaving, Column
Interleaving
Under 320x240
-
-
2D to 3D
2D to 3D, Side by Side(Half),
Top & Bottom
Over 320x240
-
-
1024X768p
-
30 / 60
1280x720p
-
30 / 60
1920X1080p
-
30 / 60
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
ENGLISH
3D supported mode manually
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Country
Service
0900 543 5454
015 200 255
800 187 40
0032 15 200255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
3220
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
Service
0 810 144 131
902 500 234
54
0770 54 54 54
01803 11 54 11
0848 543 543
801 11 200 900,
210 4800 564
0844 847 5454
06 40 54 54 54
800 9990
0818 27 6955
0 800 303 000
199600099
8 820 0071 1111
8 8000 805 805,
2255(GSM)
80200201
8 800 120 2222
880008081
8 0000 710 005
8 800 200 7676
Download PDF