LG | 55LA965W | LG 55LA965W Owner’s Manual

OWNER’S MANUAL
*
LED TV
* LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LA79**
LA86**
LA96**
LA97**
LA98**
LM96**
P/NO : MFL67728107 (1310-REV03)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
3
OPEN SOURCE SOFTWARE NOTICE
4
43
USING THE USER GUIDE
44
MAINTENANCE
SAFETY INSTRUCTIONS
44
Cleaning your TV
10
- Viewing 3D Imaging (Only 3D models)
44
44
- Screen, frame, cabinet and stand
- Power cord
12
INSTALLATION PROCEDURE
44
TROUBLESHOOTING
12
ASSEMBLING AND PREPARING
12
15
16
18
19
19
23
24
26
26
27
27
27
28
Unpacking
Separate purchase
Parts and buttons
Lifting and moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
Using Sliding Speaker
Using Built-in Camera
- Preparing Built-in Camera
Name of Parts of Buil-in Camera
- Checking the Camera's Shooting Range
Tidying cables
45
EXTERNAL CONTROL DEVICE
SETUP
45
SPECIFICATIONS
30
MAKING CONNECTIONS
30
31
31
32
33
34
34
35
36
36
36
37
38
Antenna connection
Satellite dish connection
HDMI connection
Headphone connection
DVI to HDMI connection
Component connection
Composite connection
MHL connection
Audio connection
- Digital optical audio connection
USB connection
CI module connection
Euro Scart connection
39
REMOTE CONTROL
40
MAGIC REMOTE CONTROL
FUNCTIONS
42
42
42
Registering Magic Remote Control
How to use Magic Remote Control
Precautions to Take when Using the Magic
Remote Control
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or
its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and/or remote control in the following environments:
yy
» A location exposed to direct sunlight
» An area with high humidity such as a bathroom
» Near any heat source such as stoves and other devices that produce heat
» Near kitchen counters or humidifiers where they can easily be exposed to steam or
oil
» An area exposed to rain or wind
» Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard
Mains Plug is the TV connecting/disconnecting device to AC mains electric supply.
yy
This plug must remain readily attached and operable when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect Mains cable to compliant AC mains socket with Grounded
yy
earth pin. (Except for devices which are not grounded on earth.) Otherwise
possibility you may be electrocuted or injured.
Insert power cable plug completely into wall socket otherwise if not secured
yy
completely into socket, fire ignition may break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from flowing
yy
in.
This may cause water damaged inside the Product and could give an electric shock.
When mounting TV onto wall make sure to neatly install and isolate cabling from rear
yy
of TV as to not create possibility of electric shock /fire hazard.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
De
sic
cant
Keep the anti-moisture packing material or vinyl packing out of the reach of children.
yy
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not consume
yy
them.
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery/screwdriver)
yy
between power cable plug and input Wall Socket while it is connected to the input
terminal on the wall. Additionally, do not touch the power cable right after plugging
into the wall input terminal. Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury. (Depending on
model)
Do not put or store inflammable substances near the product.
yy
There is a danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow any impact, shock or any objects to fall into the unit, and do not drop
yy
anything onto the screen.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
» The product has been impacted by shock
» The product has been damaged
» Foreign objects have entered the product
» The product produced smoke or a strange smell
This may result in fire or electric shock.
Unplug the TV from AC mains wall socket if you do not intend to use the TV for
yy
a long period of time. Accumulated dust can cause fire hazard and insulation
deterioration can cause electric leakage/shock/fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product from
yy
overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts)
yy
to the back of the product. When you install the set to use the wall mounting bracket (optional parts),
fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult with a qualified service technician. If not
yy
installed by a qualified technician, This may create a fire hazard or an electric shock
hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Batteries should not be exposed to excessive heat. For example, keep away from direct sunlight ,
yy
open fireplace and electric heaters.
Do not place non-rechargeable batteries in charging device.
yy
Make sure there are no objects between the remote control and its sensor.
yy
Signal from Remote Control can be interrupted due to external/internal lighting eg
yy
Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
» The distance between the product and the wall should be more than 10 cm.
» Do not install the product in a place with no ventilation (e.g., on a bookshelf or in a
cupboard).
» Do not install the product on a carpet or cushion.
» Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it, as it may cause damage to screen.
Avoid touching the screen or holding your finger(s) against it for long periods of time.
yy
Doing so may produce some temporary or permanent distortion/damage to screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power source
yy
even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at the plug. Don’t
yy
pull at the cord to unplug the power cord from the power board, as this could be
hazardous.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service centre once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to exchange
or refund.
You may find different brightness and color of the panel depending on your viewing
yy
position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game)
yy
for a prolonged time may cause damage to the screen, resulting in retention of the image, which is
known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours for
LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depending on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is heavy.
yy
Otherwise, this may result in injury.
9
10 SAFETY INSTRUCTIONS
ENGLISH
ENG
Viewing 3D Imaging (Only 3D models)
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long
period of time may cause headache, dizziness, fatigue or eye strain.
Those that have a photosensitive seizure or chronic illness
yy Some users may experience a seizure or other abnormal symptoms when they are exposed to a
flashing light or particular pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea, are pregnant and/ or have a chronic illness such as epilepsy,
cardiac disorder, or blood pressure disease, etc.
yy 3D Contents are not recommended to those who suffer from stereo blindness or stereo anomaly. Double
images or discomfort in viewing may be experienced.
yy If you have strabismus (cross-eyed), amblyopia (weak eyesight) or astigmatism, you may have trouble
sensing depth and easily feel fatigue due to double images. It is advised to take frequent breaks than
the average adult.
yy If your eyesight varies between your right and left eye, revise your eyesight prior to watching 3D
contents.
Symptoms which require discontinuation or refraining from watching 3D contents
yy Do not watch 3D contents when you feel fatigue from lack of sleep, overwork or drinking.
yy When these symptoms are experienced, stop using/watching 3D contents and get enough rest until the
symptom subsides.
-- Consult your doctor when the symptoms persist. Symptoms may include headache, eyeball pain,
dizziness, nausea, palpitation, blurriness, discomfort, double image, visual inconvenience or fatigue.
SAFETY INSTRUCTIONS
11
Viewing Environment
yy Viewing Distance
-- Maintain a distance of at least twice the screen diagonal length when watching 3D contents. If you
feel discomfort in viewing 3D contents, move further away from the TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children under the age of 6 are prohibited.
-- Children under the age of 10 may overreact and become overly excited because their vision is in
development (for example: trying to touch the screen or trying to jump into it. Special monitoring
and extra attention is required for children watching 3D contents.
-- Children have greater binocular disparity of 3D presentations than adults because the distance
between the eyes is shorter than that of adults. Therefore they will perceive more stereoscopic
depth compared to adults for the same 3D image.
yy Teenagers
-- Teenagers under the age of 19 may react with sensitivity due to stimulation from light in 3D
contents. Advise them to refrain from watching 3D contens for a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D effect compared to the young. Do not sit closer to the TV than the
recommended distance.
Cautions when using the 3D glasses
yy Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly.
yy Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
yy Using modified 3D glasses may cause eye strain or image distortion.
yy Do not keep your 3D glasses in extremely high or low temperatures. It will cause deformation.
yy The 3D glasses are fragile and are easily scratched. Always use a soft, clean piece of cloth when wiping
the lenses. Do not scratch the lenses of the 3D glasses with sharp objects or clean/wipe them with
chemicals.
ENGLISH
ENG
CAUTION
12 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yyImage shown may differ from your TV.
yyYour TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yyThe available menus and options may differ from the input source or product model that you are using.
yyNew features may be added to this TV in the future.
yyThe TV can be placed in standby mode in order to reduce the power consumption. And the TV should be
turned off if it will not be watched for some time, as this will reduce energy consumption.
yyThe energy consumed during use can be significantly reduced if the level of brightness of the picture is
reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
4 Make sure the network connection is available.
You can use the TV network functions only when the network connection is made.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product.
The illustrations in this manual may differ from the actual product and item.
CAUTION
yyDo not use any unapproved items to ensure the safety and product life span.
yyAny damages or injuries by using unapproved items are not covered by the warranty.
yySome models have a thin film attached on to the screen and this must not be removed.
NOTE
yyThe items supplied with your product may vary depending on the model.
yyProduct specifications or contents of this manual may be changed without prior notice due to upgrade of
product functions.
yyFor an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick and
18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory stick does
not fit into your TV’s USB port.
B
B
A
A
A
B
10 mm
18 mm
ASSEMBLING AND PREPARING
13
ENERGY AV MODE INPUT
TV
SAVING
2
3
4
5
6
7
LIST
8
9
0
FLASHBK
ENGLISH
ENG
1
MARK
FAV
VOL
3D
CH
P
A
G
E
MUTE
MENU INFO
Q.MENU
ENTER
Tag On
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Owner’s manual
Magic remote control,
batteries (AA)
(Only LA79**, LA86**,
LA960*, LA98**, LM96**)
(See p. 40)
Tag on
(Depending on model)
Scart gender cable
(See p. 38)
Dual play glasses
(Depending on model)
Cinema 3D Glasses
The number of 3D
glasses may differ
depending on the
model or country.
Component video
cable
(See p. 34)
Composite video
cable
(See p. 34)
Stand Base/ Stand
Body
(Only LA79**)
(See p. 19)
Cable holder
(Depending on model)
(See p. 28, 29)
Cable Management
(Only LA79**)
(See p. 28)
Stand Screws
8EA, M4 x 14
(Only LA79**)
(See p. 19)
Stand Screws
4EA, M4 x 16
(Only LA860*, LA868*)
(See p. 19, 20)
Stand Screws
4EA, M4 x 20
(Only LA960*, LA98**,
LM96**)
(See p. 19)
Stand Base
(Only LA860*, LA960*)
(See p. 19)
Power Cord
(Depending on model)
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
ENERGY AV MODE INPUT
TV
SAVING
1
2
3
4
5
6
7
8
9
0
FLASHBK
BACK
LIST
SMART
MARK
FAV
VOL
CH
3D
P
A
G
E
MUTE
/Q.MENU
MENU INFO
Q.MENU
P
ENTER
BACK
EXIT
L/R SELECT
FREEZE
RATIO
Remote control,
batteries (AAA)
(Depending on model)
(See p. 39)
Stand Base
(Only LA868*)
(See p. 20)
Magic remote control,
batteries (AA)
(Only LA965*, LA97**)
(See p. 41)
Stand Base
(Only LA97**)
(See p. 21)
Stand Base
(Only LA965*)
(See p. 20)
Video call camera
(Only 70LA860*)
Stand Screws
4EA, M4 x 14
(Only 55LA97**,
LA965*)
(See p. 20, 21)
Wall mount inner
spacers
4EA (Only LA97**)
(See p. 25)
Wall mount screws
4EA, M6 x 54
(Only 55LA97**)
(See p. 25)
Wall mount screws
4EA, M8 x 44
(Only 65LA97**)
(See p. 25)
Stand Base / Stand
Body
(Only LA98**, LM96**)
(See p. 21)
Stand Screws
6EA, M5 x 16
(Only LA98**, LM96**)
(See p. 21)
ASSEMBLING AND PREPARING
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
123
P
AG-F***DP
Dual play glasses
AG-F***
Cinema 3D glasses
AN-MR400
Magic remote
NB7530
Built-in sound bar
Tag On
AN-VC5**
Video call camera
Compatibility
LG Audio device
Tag on
LA79**, LA965*
LA86**
LA960*, LA97**
LA98**, LM96**
•
•
•
•
•
•
•
•
•
•
•
•
•
(Depending on
model)
LG Audio device
•
•
•
•
Tag on
•
•
•
•
AG-F***DP
Dual play glasses
AG-F***
Cinema 3D glasses
AN-MR400
Magic remote
AN-VC5**
Video call camera
NB7530
Built-in sound bar
•
•
•
(Depending on
model)
The model name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
ENGLISH
ENG
Separate purchase
15
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
B type : LA860*, LA960*
A type : LA79**
Buttons
Screen
Video call camera
(Only 42/47/55/60LA860*,
LA960*)
Screen
OK
Speakers
OK
SETTINGS
INPUT
Speakers
Remote control sensor
LG Logo light
SETTINGS
INPUT
Remote control sensor
LG Logo light
C type : LA868*
Screen
Buttons
D type : LA965*
Video call camera
Buttons
Buttons
Screen
OK
OK
Speakers
SETTINGS
Speakers
SETTINGS
INPUT
INPUT
Remote control sensor
LG Logo light
Remote control sensor
LG Logo light
ASSEMBLING AND PREPARING
Video call camera
Buttons
OK
OK
Speakers
Speakers
SETTINGS
INPUT
Remote control sensor
Power Indicator
Button
Buttons
Screen
SETTINGS
INPUT
LG Logo light
Remote control and
Intelligent sensors1
Description
Scrolls Hthrough the saved programmes.
HAdjusts
the volume level.
Selects the highlighted menu option or confirms an input.
H
S
Accesses the main menu, or saves your input and exits the menus.
Changes the input source.
H
Turns the power on or off.
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
CAUTION
yy To avoid possible SPEAKER damage or degradation in performance please
keep contact of TV /Speaker out of reach of children. (Only LA965*)
NOTE
yy You can set the LG Logo Light to on or off by selecting OPTION in the main menus. (Depending on model)
ENGLISH
ENG
F type : LA98**, LM96**
E Type : LA97**
Screen
17
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
Please note the following advice to prevent the
TV from being scratched or damaged and for safe
transportation regardless of its type and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ASSEMBLING AND PREPARING
Image shown may differ from your TV.
ENGLISH
ENG
Setting up the TV
LA860*, LA960*
Attaching the stand
1
LA79**
M4 x 14
1
4EA
Stand Body
Stand Base
2
Front
Stand Base
2
3
3
M4 x 14
4EA
19
M4 x 16
4EA
(LA860*)
M4 x 20
4EA
(LA960*)
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
LA868*
LA965*
1
1
Stand Base
Stand Base
2
Stand Base
2
②
①
① Attach the stand to the TV using the upper
mounting hole on the back of the TV.
② Attach the stand to the TV using the lower
connection on the back of the TV.
NOTE
3
yy Be sure to attach the upper mounting hole
first, and then attach the lower connection
second.
3
M4 x 16
4 EA
M4 x 14
4 EA
ASSEMBLING AND PREPARING
21
ENGLISH
ENG
LA98**, LM96**
LA97**
1
1
Front
Stand body
Front
Stand Base
2
Stand base
2
3
6 EA
M5 x 16
3
M4 x 14
4 EA
NOTE
yy The stand screws are already attached
at the back of the TV. Please use these
attached screw to assemble the TV and
stand. (Only 65LA97**)
Front
22 ASSEMBLING AND PREPARING
ENGLISH
ENG
4
CAUTION
4 EA
M4 x 20
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
NOTE
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
ASSEMBLING AND PREPARING
1 Lift and tilt the TV into its upright position on a
table.
-- Leave a 10 cm (minimum) space from the
wall for proper ventilation.
Adjusting the angle of the TV to suit view
(This feature is not available for all models.)
Swivel 15 degrees to the left or right and adjust the
angle of the TV to suit your view. (Only LA79**)
15
15
10 cm
m
10 c
10 cm
10 cm
10 cm
Swivel 10 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only 42/47LA860*)
2 Connect the power cord to a wall outlet.
CAUTION
10
10
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
Using the Kensington security system (This feature is
not available for all models.)
Image shown may differ from your TV.
yy
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Swivel 8 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only 55/60LA860*)
8
8
Connect the Kensington security system cable
between the TV and a table.
Swivel 7 degrees to the left or right and adjust the
angle of the TV to suit your view.
(Only LA98**, LM96**)
7
7
ENGLISH
ENG
Mounting on a table
23
24 ASSEMBLING AND PREPARING
ENGLISH
ENG
CAUTION
yy When adjusting the angle adof the product,
watch out for your fingers.
»»Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much,
it may fall, causing damage or injury.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
Mounting on a wall
<Rear>
<Front>
Securing the TV to a wall
(This feature is not available for all models.)
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-If there are bolts inserted at the eye-bolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy When TV Wall Mount installation is applied
please consider adequate spacing around
perimeter of TV and at bottom for proper
operation of Sliding Speaker compartment.
Inadequate space may interfere with normal
operation of Sliding Speaker compartment.
»»Sliding Speaker OPEN state lowers/extends
to (25-35mm) below TV.
ASSEMBLING AND PREPARING
yy Be sure to use the existing Components
provided with the TV. Do NOT use
components supplied with Wall Bracket to
install Wall Bracket to TV. (Only LA97**)
Wall mount inner
spacers
4EA
Wall mount screw
4EA, M6 x 54
(Only 55LA97**)
4EA, M8 x 44
(Only 65LA97**)
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
42/47/55LA79**
42/47/55LA86**
47/55LA960*
55LA965*
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws 4
Wall mount
MSW240
bracket
LSW430B
Model
60LA86**
65LA965*
55LA97**
VESA (A x B)
400 x 400
Standard screw
M6
Number of screws 4
Wall mount
LSW430B
bracket
65LA97**
84LA98**
84LM96**
600 x 400
M8
4
LSW630B
70LA86**
400 x 400
M8
4
LSW430BX
Wall mount bracket
LSW430B
LSW630B
MSW240
CAUTION
yy Disconnect the power first, and then move
or install the TV. Otherwise electric shock
may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorised LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching the LG wall mount bracket
to the TV, do not use wall mount spacers
and wall mount screws provided with the
LG wall mount bracket. Please use wall
mount inner spacers and wall mount screws
provided with the TV accessory. (Only LA97**)
LSW430BX
A
B
Wall Mount Inner Spacer
ENGLISH
ENG
CAUTION
25
26 ASSEMBLING AND PREPARING
ENGLISH
ENG
Using Sliding Speaker
Using Built-in Camera
(Only LA97**)
(Depending on model)
You can make a video call or use the mo-tion
recognition function using the built-in camera of
the TV. This TV does not support the use of an
external camera.
NOTE
Sliding Speaker
1 When TV is turned ON - the hidden speaker
slides out from inside the TV.
2 Go to More ➡ Settings ➡ SOUND ➡ Sliding
Speaker to set Sliding Speaker.
-- If you are mounting TV on entertainment
table/unit please make sure there is
enough clearance between yourself
and foreign objects to allow operation of
internal sliding speaker otherwise injury to
yourself or damage to TV could occur.
-- Please Do Not use excessive force during
operation of internal sliding Speaker as it
may cause it to malfunction.
-- Make sure Speaker is in OPEN position
when viewing TV as sound will be
abnormal or distorted.
3 When transporting the TV, make sure that
the Sliding Speaker is closed. If the Sliding
Speaker is open when being transported, it may
become damaged, resulting in malfunction.
-- To close the Sliding Speaker, go to SOUND
➡ Sliding Speaker, select 'Opens when
TV is turned on' and press the POWER
button.
Before using the built-in camera, you must
yy
recognize the fact that you are legally
responsible for the use or misuse of the
camera by the relevant national laws including
the criminal law.
The relevant laws include the Personal
yy
Information Protection law which regulates
the processing and transferring of personal
information and the law which regulates the
monitoring by camera in a workplace and
other places.
When using the built-in camera, avoid
yy
questionable, illegal, or immoral situations.
Other than at public places or events, consent
to be photographed may be required. We
suggest avoiding the following situations :
(1) Using the camera in areas where the use
of camera is generally prohibited such as
restroom, locker room, fitting room and
security area.
(2) Using the camera while causing the
infringement of privacy.
(3) Using the camera while causing the
violation of the relevant regulations or laws.
ASSEMBLING AND PREPARING
3 Pull down the built-in camera when you are not
using it.
1 Pull up the slide at the back of the TV.
Slide
Name of Parts of Built-in
Camera
Microphone
Indicator
NOTE
Camera Lens
Remove the protective film before using the
yy
built-in camera.
2 You can adjust the angle of the camera with the
angle adjustment lever on the back of the builtin camera (within 5 degrees vertically).
Checking the Camera's Shooting
Range
Angle
Adjustment
Lever
1 Press the SMART button on the remote
control to display the More menu.
2 Select Settings from the More menu and then
press the wheel (OK) button.
3 Go to OPTION ➡ Camera Setting Help and
press the wheel (OK) button.
NOTE
The optimal distance from the camera to use
yy
the motion recognition function is between 1.5
and 4.5 m.
ENGLISH
ENG
Preparing Built-in Camera
27
28 ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
(Only LA965*)
(Only LA79**)
1 Gather and bind the cables with the cable
holder on the back of the TV.
2 Fix the Cable Management firmly to the TV.
1 Gather and bind the cables with the Cable
Management.
2 Fix the Cable Management firmly to the TV.
Cable Holder
⨲㘶ᖂ2
㏪ⱞ⋾#Ɐᴏ
Cable Management
(Only LA860*, LA960*)
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
Cable Holder
Cable Management
Cable Holder
(Only LA868*)
1 Gather and bind the cables with the cable
holder on the back of the TV.
Cable Management
(Only LA98**, LM96**)
1 Gather and bind the cables with the Cable
Holder and the Cable Management.
2 Fix the Cable Management firmly to the TV.
Cable Holder
Cable Holder
Cable Management
MAKING CONNECTIONS
1 Gather and bind the cables with the cable
holder on the back of the TV.
Cable Holder
CAUTION
yy Do not move the TV by holding the cable
holders, as the cable holders may break,
and injuries and damage to the TV may
occur.
ENGLISH
ENG
(Only LA97**)
29
30 MAKING CONNECTIONS
ENGLISH
ENG
MAKING
CONNECTIONS
Antenna connection
This section on MAKING CONNECTIONS mainly
uses diagrams for the LA79** models.
IN
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, PC, gaming devices, and other external
devices.
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change
the PC output to another resolution, change
the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE
menu until the picture is clear.
yy In PC mode, some resolution settings may
not work properly depending on the graphics
card.
ANTENNA/
CABLE
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
NOTE
yyUse a signal splitter to use more than 2 TVs.
yyIf the image quality is poor, install a signal
amplifier properly to improve the image quality.
yyIf the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yyAn antenna cable and converter are not provided.
yySupported DTV Audio: MPEG, Dolby Digital,
Dolby Digital Plus, HE-AAC
yyDisplay of Ultra HD(3840 x 2160 pixels) content
compatible; additional device capable of processing Ultra HD source content (in 2D or 3D) may
be required and will be sold separately.
(Only LA965*, LA97**, LA98**, LM96**)
MAKING CONNECTIONS
HDMI connection
(Only LA79**, LA86**, LA960*)
3
/ DVI IN
4 (MHL)
(Only satellite models)
2
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
IN
13/18V
700mA Max
LNB IN
1 (ARC)
Satellite
(*Not Provided)
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
HDMI
DVD/ Blu-Ray / HD Cable
Box / HD STB / PC
(*Not Provided)
HDMI
1 (ARC)
2
/ DVI IN
3
(MHL)
(Only LA965*, LA97**, LA98**, LM96**)
ENGLISH
ENG
Satellite dish connection
31
32 MAKING CONNECTIONS
ENGLISH
ENG
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
Choose any HDMI input port to connect. It does
not matter which port you use.
Headphone connection
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy Use the latest High Speed HDMI™ Cable
with CEC (Customer Electronics Control)
function.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : Dolby
Digital, DTS, PCM (Up to 192 KHz, 32KHz/
44.1KHz/48KHz/88KHz/96KHz/176KHz/19
2KHz)
ARC (Audio Return Channel)
An external audio device that supports
yy
SIMPLINK and ARC must be connected
using HDMI/DVI IN 1 (ARC) port.
When connected with a high-speed
yy
HDMI cable, the external audio device
that supports ARC outputs optical SPDIF
without additional optical audio cable and
supports the SIMPLINK function.
OUT
Ext.Speaker /
H/P
(*Not Provided)
Transmits the headphone signal from the TV to
an external device. Connect the external device
and the TV with the headphone as shown.
NOTE
AUDIO menu items are disabled when
yy
connecting a headphone.
Optical digital audio out is not available when
yy
connecting a headphone.
Headphone impedance: 16
yy
Max audio output of headphone:
yy
0.624 mW to 1.04 mW
Headphone jack size: 0.35 cm
yy
MAKING CONNECTIONS
33
(Only LA79**, LA86**, LA960*)
2
/ DVI IN
3
(MHL)
(Only LA965*, LA97**, LA98**, LM96**)
1 (ARC)
AV2
AV2
(*Not Provided)
(*Not Provided)
(*Not Provided)
(*Not Provided)
AUDIO OUT
DVI OUT
DVD / Blu-Ray / HD Cable Box / PC
AUDIO OUT
DVI OUT
DVD / Blu-Ray / HD Cable Box / PC
Transmits the digital video signal from an external
device to the TV. Connect the external device and
the TV with the DVI-HDMI cable as shown. To
transmit an audio signal, connect an audio cable.
Choose any HDMI input port to connect. It does
not matter which port you use.
NOTE
Depending on the graphics card, DOS mode
yy
may not work if a HDMI to DVI Cable is in
use.
yy When using the DVI/HDMI cable, single link is
supported.
ENGLISH
ENG
DVI to HDMI connection
34 MAKING CONNECTIONS
ENGLISH
ENG
Composite connection
Component connection
IN
AV2
VIDEO
COMPONENT
AUDIO
PR
PB
Y
AV2
VIDEO
IN
COMPONENT
COMPONENT
AUDIO
PR
PB
PB
Y
Y
AV2
AV2
YELLOW
GREEN
(Use the composite
video cable provided.)
(Use the component video cable
provided.)
YELLOW
(Use the composite video
cable provided.)
RED
RED
BLUE
RED
WHITE
YELLOW
GREEN
BLUE
RED
(*Not Provided)
R
AUDIO
WHITE
BLUE
RED
RED
WHITE
L
WHITE
RED
RED
YELLOW YELLOW
RED
WHITE
GREEN GREEN
WHITE
YELLOW
(*Not Provided)
VIDEO
DVD / Blu-Ray /
HD Cable Box
Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a component gender cable
as shown.
NOTE
yy
If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
VIDEO
L (MONO) AUDIO R
VCR / DVD / Blu-Ray /
HD Cable Box
Transmits analogue video and audio signals from
an external device to the TV. Connect the external
device and the TV with a composite gender cable
as shown.
MAKING CONNECTIONS
(Only LA965*, LA97**, LA98**, LM96**)
1 (ARC)
2
1 (ARC)
3
2
/ DVI IN
/ DVI IN
3
4 (MHL)
(MHL)
(Only LA79**, LA86**, LA960*)
MHL passive cable
(*Not Provided)
MHL passive cable
(*Not Provided)
Mobile phone
Mobile phone
Mobile High-definition Link (MHL) is an interface
for transmitting digital audiovisual signals from
mobile phones to television sets.
NOTE
Connect the mobile phone to the HDMI/DVI
yy
IN 4 (MHL) or HDMI/DVI IN 3 (MHL) port to
view the phone screen on the TV.
The MHL passive cable is needed to connect
yy
the TV and a mobile phone.
This only works for the MHL-enabled phone.
yy
Some applications can be operated by the
yy
remote control.
For some mobile phones supporting MHL,
yy
you can control with the magic remote
control.
Remove the MHL passive cable from the TV
yy
when :
»» the MHL function is disabled
»» your mobile device is fully charged in
standby mode
ENGLISH
ENG
MHL connection
35
36 MAKING CONNECTIONS
USB connection
PCMCIA CARD SLOT
3
USB IN
(Only LA79**, LA86**, LA960*)
OUT
(USB 3.0 IN)
USB
1
HDD IN
2
USB IN
OPTICAL
DIGITAL
AUDIO
HUB
HDD
(*Not Provided)
(*Not Provided)
(Only LA965*, LA97**, LA98**, LM96**)
Digital Audio System
OPTICAL AUDIO IN
yy Do not look into the optical output port.
Looking at the laser beam may damage
your vision.
yy Audio with ACP (Audio Copy Protection)
function may block digital audio output.
HDD IN
Transmits a digital audio signal from the TV to an
external device. Connect the external device and
the TV with the optical audio cable as shown.
(USB 3.0 IN)
2
Digital optical audio connection
NOTE
HUB
USB IN
3
You may use an external audio system instead of
the built-in speaker.
USB
1
ENGLISH
ENG
Audio connection
HDD
(*Not Provided)
MAKING CONNECTIONS
CI module connection
▼PCMCIA CARD SLOT▼
NOTE
Some USB Hubs may not work. If a USB
yy
device connected using a USB Hub is not
detected, connect it to the USB IN port on
the TV directly.
Connect the external power source if your
yy
USB is needed.
(*Not Provided)
View the encrypted (pay) services in digital TV
mode. This feature is not available in all countries.
NOTE
Check if the CI module is inserted into the
yy
PCMCIA card slot in the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
yy If the TV does not display any video and
audio when CI+ CAM is connected, please
contact to the Terrestrial/Cable/Satellite
Service Operator.
ENGLISH
ENG
Connect a USB storage device such as a USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the
Smart Share menu to use various multimedia files.
37
38 MAKING CONNECTIONS
ENGLISH
ENG
Euro Scart connection
IN/OUT
(RGB)
AV1
(Use the scart
gender cable
provided.)
(*Not Provided)
Transmits the video and audio signals from an
external device to the TV set. Connect the external
device and the TV set with the euro scart cable as
shown.
Current
input mode
Digital TV
Output
Type
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
yy When watching digital TV in 3D imaging
mode, only 2D out signals can be output
through the SCART cable. (Only 3D models)
yy If you set the 3D mode to On while a
scheduled recording is performed on digital
TV, monitor out signals cannot be output
through the SCART cable, and the recording
cannot be performed.
REMOTE CONTROL
39
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
(Depending on model)
TV /
RAD
RATIO
SUBTITLE
INPUT
Q.MENU GUIDE
1
4
7
LIST
2
5
8
0
3
6
9
Q.VIEW
FAV
MUTE
1
TEXT
INFO
T.OPT
AD/PIP
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Accesses the Quick menus.
GUIDE Shows programme guide.
RATIO Resizes an image.
Changes the input source.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
APP/* Select the MHP TV menu source. (Only Italy.)
(Depending on model)
MUTE
Mutes all sounds.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
TELETEXT buttons These buttons are used for teletext.
Views the information of the current programme and
screen.
SMART Accesses the Smart Home menus.
EXIT
LIVE TV
Time Machine
SETTINGS
2
MY APPS Shows the list of Apps.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and return to TV viewing.
Accesses the main menus.
REC
Start to record and display record menu.
LIVE TV Return to LIVE TV.
Control buttons (
) Controls the Premium contents,
Time Machine or Smart Share menus or the SIMPLINK compatible devices (USB or SIMPLINK or Time Machine).
Coloured buttons These access special functions in some
menus. (
Red
Green
Yellow
Blue)
ENGLISH
ENG
REMOTE CONTROL
40 MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
MAGIC REMOTE CONTROL FUNCTIONS
When the message “Magic Remote Control battery is low. Change the battery.” is
displayed, replace the battery.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching
and ends to the label inside the compartment, and close the battery cover. Be
sure to point the remote control toward the remote control sensor on the TV.
To remove the batteries, perform the installation actions in reverse.
or
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
(Only LA79**, LA86**, LA960*, LA98**, LM96**)
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
BACK
Returns to the previous level.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation
button while moving the pointer
on the screen, the pointer
disappears, and the Magic
Remote Control works as a
regular remote control.
To display the pointer again,
shake the Magic Remote
Control from side to side.
+
Adjusts the volume level.
3D
Used for viewing 3D video.
SMART
Accesses the Smart Home.
Voice recognition
(Depending on model)
LIGHTING ON/OFF
Turns the light on and off.
If you set it to ON, the light
automatically turns off in 5
seconds
Navigation buttons (up/down/
left/right)
Scrolls through menus or options.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
/Q.MENU
Accesses the quick menus.
Accesses the Universal Control.
(This feature is not available in all
countries.)
(MUTE)
Mutes all sounds.
Voice recognition(Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation
and speed) and the environment (noise and TV volume).
1. Press the Voice recognition button.
2. Speak when the voice display window appears on the left of the TV screen.
• The voice recognition may fail when you speak too fast or too slow.
• Use the Magic remote control no further than 10 cm from your face.
MAGIC REMOTE CONTROL FUNCTIONS
41
ENGLISH
ENG
(Only LA965*, LA97**)
Pointer (RF transmitter)
(POWER)
Turns the TV on or off.
Navigation buttons
(up/down/left/right)
Scrolls through menus or options.
BACK
Returns to the previous level.
Wheel(OK)
Selects menus or options and
confirms your input.
Scrolls through the saved
programmes.
If you press the navigation
button while moving the pointer
on the screen, the pointer
disappears, and the Magic
Remote Control works as a
regular remote control.
To display the pointer again,
shake the Magic Remote
Control from side to side.
Used for viewing 3D video.
BACK
SMART
/Q.MENU
P
SMART
Accesses the Smart Home menu.
Voice recognition
(Depending on model)
/Q.MENU
Accesses the quick menus.
Accesses the Universal Control.
(This feature is not available in
all countries.)
+
Adjusts the volume level.
ꕌPꕍ
Scrolls through the saved
programmes or channels.
(MUTE)
Mutes all sounds.
Voice recognition (Depending on model)
Network connection is required to use the voice recognition function.
The recognition rate may vary depending on the user’s characteristics (voice, pronunciation, intonation
and speed) and the environment (noise and TV volume).
1.
2.
•
•
Press the Voice recognition button.
Speak when the voice display window appears on the left of the TV screen.
The voice recognition may fail when you speak too fast or too slow.
Use the Magic remote control no further than 10 cm from your face.
42 MAGIC REMOTE CONTROL FUNCTIONS
ENGLISH
ENG
Registering Magic Remote
Control
It is necessary to ‘pair’ (register) the magic remote
control to your TV before it will work.
BACKto register
HOME
How
the Magic Remote Control
P
MY APPS
1 To register automatically,
turn the TV on and press the
Wheel(OK) button. When
registration is completed, the
completion message appears
on the screen.
2 If registration fails, turn the TV
off and back on, then press
the Wheel(OK) button to
complete registration.
How to re-register the Magic Remote Control
BACK
SMART
1 Press and hold the BACK and
SMART buttons together for 5
seconds to reset, then register it
by following “How to register the
Magic Remote Control” above.
2 To re-register the Magic
Remote Control, press and
hold the BACK button for 5
seconds toward the TV. When
registration is completed, the
completion message appears
on the screen.
How to use magic remote
control
1 If the
pointer disappears,
move
How to use
Magic
Remote
the Magic Remote Control
Control slightly to left or right. Then, it
will automatically appear on the
screen.
»»If the pointer has not been used
for a certain period of time, it will
disappear.
2 You can move the pointer by
aiming the Pointer Receiver of
the Magic Remote Control at
your TV then move it left, right,
up or down.
»»If the pointer does not work
properly, leave the Magic
Remote Control for 10 seconds
then use it again.
More
1
If you press Wheel(OK) on the Magic
Remote Control, the following screen
appears.
Shows information about the current
programme and screen.
2 You can select More Menu.
Precautions to Take when
Using the Magic Remote
Control
Use the Magic Remote Control within the
yy
maximum communication distance (10 m).
Using the Magic Remote Control beyond this
distance, or with an object obstructing it, may
cause a communication failure.
A communication failure may occur due to
yy
nearby devices. Electrical devices such as
a microwave oven or wireless LAN product
may cause interference, as these use the
same bandwidth (2.4 GHz) as the Magic
Remote Control.
The Magic Remote Control may be damaged
yy
or may malfunction if it is dropped or receives
a heavy impact.
Take care not to bump into nearby furniture
yy
or other people when using the Magic
Remote Control.
Manufacturer and installer cannot provide
yy
service related to human safety as the
applicable wireless device has possibility of
electric wave interference.
It is recommended that an Access Point (AP)
yy
be located more than 1 m away from the
TV. If the AP is installed closer than 1 m, the
Magic Remote Control may not perform as
expected due to frequency interference.
USING THE USER GUIDE
43
ENGLISH
ENG
USING THE USER GUIDE
User Guide allows you to more easily access the detailed TV information.
1 Press the SMART button to access the Smart
Home menu.
2 Select User Guide and press Wheel(OK).
OPTION > To set language
1
SMART  Settings  OPTION  Language
Selects Menu Language and Audio Language displayed on the screen.
Menu Language Selects a language for the display text.
[In Digital Mode Only]
Audio Language When watching a digital broadcast containing several audio
languages, you can select the language you want.
[In Digital mode Only]
Use the Subtitle function when two or more subtitle
Subtitle
languages are broadcast.
Language
✎ If subtitle data in a selected language is not broadcast,
the default language subtitle will be displayed.
User Guide

User Guide
3
To use input device
To set time options
PROGRAMME Setting
To set TV lock options
PICTURE, SOUND Setting
OPTION
Disabled Assistance
Advanced Function
Information
To set language
To set country
LG SMART Function
2
To set Magic remote control
Online User Guide
Index
4
2
Close
User Guide
1
Try Now
5
1
Shows the current watching programme or
input source screen.
2
Allows to select the category you want.
3
Allows to select the item you want.
You can use ꕌ/ꕍ to move between pages.
4
Allows to browse the description of the
function you want from the index.
5
Provides the detailed information on the
functions of LG Smart TV when the Internet
is connected.
(It may not be available depending on the
country/language.)
1
Shows the description of the selected menu.
You can use ꕌ/ꕍ to move between pages.
2
Moves to the selected menu directly from the
User Guide.
44 MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control
the TV with the
remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to , to ).
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
When connecting
to the PC (HDMI
DVI), ‘No signal’
or ‘Invalid Format’
is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
EXTERNAL CONTROL DEVICE SETUP / SPECIFICATIONS
To obtain the external control device setup information, please visit www.lg.com
SPECIFICATIONS
Wireless LAN module(TWFM-B006D) specification
Standard
IEEE802.11a/b/g/n
2400 to 2483.5 MHz
Frequency Range
5150 to 5250 MHz
5725 to 5850 MHz (for Non EU)
802.11a: 11 dBm
802.11b: 14 dBm
Output Power
802.11g: 10.5 dBm
(Max.)
802.11n - 2.4GHz: 11 dBm
802.11n - 5GHz: 12.5 dBm
Bluetooth module (BM-LDS401) specification
Standard
Bluetooth Version 3.0
Frequency Range
Output Power (Max.)
2400 ~ 2483.5 MHz
10 dBm or lower
Because band channel used by the country could be different, the user can not change or adjust the
yy
operating frequency and this product is set for the regional frequency table.
0197
0197
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
45
46 SPECIFICATIONS
ENGLISH
ENG
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
42LA79**
47LA79**
55LA79**
42LA790V-ZA,
42LA790W-ZA,
42LA7909-ZA
47LA790V-ZA,
47LA790W-ZA,
47LA7909-ZA
55LA790V-ZA,
55LA790W-ZA,
55LA7909-ZA
1077x 690 x 285
1247 x 789 x 326
1077 x 625 x 34.1
1247 x 722 x 34.1
965 x 628 x 285
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 965 x 562 x 34.1
14.7
Weight
With stand (kg)
18.5
25.3
13.1
16.8
23.0
Power requirement
AC 100-240 V ~ 50/60
Hz
AC 100-240 V ~ 50/60
Hz
AC 100-240 V ~ 50/60
Hz
Power consumption
120 W
130 W
150 W
Without stand (kg)
MODELS
42LA860*
47LA860*
55LA860*
42LA860V-ZA,
42LA860W-ZA,
42LA8609-ZA
47LA860V-ZA,
47LA860W-ZA,
47LA8609-ZA
55LA860V-ZA,
55LA8609-ZA,
55LA860W-ZA
1059 x 694 x 269
1229 x 788 x 316
1059 x 625 x 35.1
1229 x 721 x 35.1
948 x 631 x 269
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 948 x 562 x 35.1
Weight
With stand (kg)
15.6
19.3
26.2
Without stand (kg)
13.5
17.2
23.4
Power requirement
AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60
Hz
Hz
Hz
Power consumption
MODELS
120 W
60LA860*
70LA860*
60LA860V-ZA,
60LA860W-ZA,
60LA8609-ZA
1338 x 850 x 316
70LA860V-ZA,
70LA860W-ZA,
70LA8609-ZA
1582 x 997 x 401
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 1338 x 782 x 35.1
30.5
Weight
With stand (kg)
Without stand (kg)
Power requirement
Power consumption
130 W
27.7
1582 x 922 x 57.9
46.1
42.1
AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60
Hz
Hz
170 W
250 W
150 W
SPECIFICATIONS 47
42LA868*
47LA868*
55LA868*
42LA868V-ZD
47LA868V-ZD
55LA868V-ZD
1059 x 682 x 251
1229 x 784 x 310
1059 x 625 x 35.1
1229 x 721 x 35.1
19.7
26.7
17.2
23.4
948 x 619 x 251
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 948 x 562 x 35.1
15.9
Weight
With stand (kg)
Without stand (kg)
Power requirement
13.5
AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60
Hz
Hz
Hz
Power consumption
MODELS
120 W
130 W
47LA960*
55LA960*
47LA960V-ZA,
47LA960W-ZA,
47LA9609-ZA
1050 x 684 x 266
55LA960V-ZA,
55LA960W-ZA,
55LA9609-ZA
1220 x 781 x 305
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 1050 x 616 x 31.2
15.5
Weight
With stand (kg)
1220 x 712 x 31.5
21.0
13.6
18.4
Power requirement
AC 100-240 V ~ 50/60
Hz
AC 100-240 V ~ 50/60
Hz
Power consumption
190 W
200 W
Without stand (kg)
MODELS
55LA965*
65LA965*
55LA965V-ZA,
55LA965W-ZA,
55LA9659-ZA
1234 x 790 x 261
65LA965V-ZA,
65LA965W-ZA,
65LA9659-ZA
1455 x 912 x 294
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 1234 x 755 x 41.9
26.1
Weight
With stand (kg)
Without stand (kg)
Power requirement
24.6
35.0
190 W
Power requirement
Power consumption
* : Sliding Speaker open state
250 W
55LA97**
65LA97**
55LA970V-ZA,
55LA970W-ZA,
55LA9709-ZA
1230 x 781 x 274
65LA970V-ZA,
65LA970W-ZA,
65LA9709-ZA
1451 x 910 x 325
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 1230 x 714(*743) x
40.2
31.0
Weight
With stand (kg)
Without stand (kg)
36.8
AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60
Hz
Hz
Power consumption
MODELS
1455 x 881 x 43.5
27.9
1451 x 838(*868) x
40.8
44.2
40.6
AC 100-240 V ~ 50/60 AC 100-240 V ~ 50/60
Hz
Hz
280 W
370 W
150 W
ENGLISH
ENG
MODELS
48 SPECIFICATIONS
ENGLISH
ENG
MODELS
84LA98**
84LM96**
84LA980V-ZB
84LA980V-ZD
84LM960V-ZD
84LM960W-ZD
Dimensions With stand (mm)
1916 x 1214 x 399
(W x H x D) Without stand(mm) 1916 x 1120 x 39.9
1916 x 1214 x 399
Weight
1916 x 1120 x 39.9
With stand (kg)
81.7
81.7
Without stand (kg)
70.4
70.4
AC 100-240 V~ 50 /
60 Hz
520 W
AC 100-240 V~ 50 /
60 Hz
520 W
Power requirement
Power consumption
CI Module Size
(W x H x D)
Environment
condition
100.0 mm x 55.0 mm x 5.0 mm
Operating
Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Digital TV
Analogue TV
DVB-T/T2
1
Television system
PAL/SECAM B/G/I/D/K,
DVB-C2
SECAM L/L’
DVB-S/S23
VHF: E2 to E12
Programme coverage
VHF, UHF
UHF: E21 to E69
C-Band, Ku-Band
CATV: S1 to S20
HYPER: S21 to S47
Maximum number of storable
programmes
External antenna impedance
1 T/T2 : Terrestrial
2 C : Cable
3 S/S2 : Satellite
6,000
1,200
75 Ω
SPECIFICATIONS 49
Component port connecting information
Resolution
Horizontal
Frequency (kHz)
Vertical
Frequency
(Hz)
640X480
31.469
31.5
59.94
60
720X480
31.469
31.5
59.94
60
720X576
31.25
50
1280X720
37.5
44.96
45
50
59.94
60
1920X1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
53.95
54
56.25
61.43
67.5
23.976
24.00
25.00
29.970
30.00
3840 x 2160
(Only LA97**,
LA965*,
LA98**,
LM96**)
HDMI-PC supported mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.50
60.00
3840 x 2160
(Only LA97**,
LA965*, LA98**,
LM96**)
54
56.25
67.5
24.00
25.00
30.00
Component ports on
the TV
Y
PB
PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Signal
Component
480i/576i
O
480p/576p
O
720p/1080i
O
1080p
O
(50 Hz / 60 Hz only)
* You may experience video/sound lag when
playing the ultra HD content (resolution:
3840 x 2160) on your computer, depending
on your computer specifications.
ENGLISH
ENG
HDMI/DVI-DTV supported mode
50 SPECIFICATIONS
ENGLISH
ENG
[ULTRA HD] Video Supported Codec
yy Maximum resolution : 3840 x 2160 @ 30p
yy Maximum data transfer rate :
3840 X 2160(H.264 L5.1) : 50Mbps(megabits per second)
3840 X 2160(H.265 L5.0) : 25Mbps
Extension
.mkv / .mp4 / .ts
.ts
Codec
Video
H.264/AVC
Audio
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
Video
H.265(HEVC)
Audio
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
NOTE
yy Unsupported codecs are only available after a software upgrade.
yy Video files created by some encoders may not be played back.
yy ATTENTION : Your ULTRA HD TV may not support HEVC encoded contents that are not officially
supplied by LG.
yy Video files in formats other than the ones specified here may not be played back.
yy Playback of video files stored on the USB device that do not support High Speed, may not work
properly.
yy Some subtitles created by users may not work properly.
yy The video and subtitle files should be placed in the same folder. For subtitles to display correctly, the
video and subtitle files must have the same name.
yy It supports the playback through USB only.
yy Some ULTRA HD models will need to be connected to an “ULTRA HD Upgrade Kit”.
SPECIFICATIONS 51
yy
Video, which is input as below media contents is switched into the 3D screen automatically.
yy
The method for 3D digital broadcast may differ depending on the signal environment. If video is not
switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
640x480
Horizontal
Frequency
(kHz)
576p
59.94 / 60
HDMI
1080i
1080p
Side by Side(Half), Top & Bottom,
Side by Side(Full)
62.938 / 63
Frame Packing, Line Alternative
31.25
50
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame Packing, Line Alternative
37.50
50
44.96 / 45
59.94 / 60
75
50
89.91 / 90
59.94 / 60
28.125
50
33.72 / 33.75
59.94 / 60
56.25
50
67.432 / 67.5
59.94 / 60
26.97 / 27
23.97 / 24
28.125
25
33.716 / 33.75
29.976 / 30
43.94 / 54
23.97 / 24
56.25
25
67.432 / 67.5
29.976 / 30
56.25
50
67.432 / 67.5
59.94 / 60
USB
1080p
33.75
30
DLNA
1080p
33.75
30
DTV
Frame Packing, Line Alternative
31.469 / 31.5
62.5
720p
Playable 3D video format
Side by Side(Half), Top & Bottom,
Side by Side(Full)
31.469 / 31.5
62.938 / 63
480p
Vertical
Frequency
(Hz)
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Line Alternative
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Field Alternative
Side by Side(Half), Top & Bottom,
Side by Side(Full)
Frame packing, Line Alternative
Side by Side(Half), Top & Bottom
Side by Side(Half), Top & Bottom,
Checker Board, MPO(Photo),
JPS(Photo)
Signal
Playable 3D video format
Frame Compatible
Side by Side(Half), Top & Bottom
ENGLISH
ENG
3D supported mode
52 SPECIFICATIONS
ENGLISH
ENG
3D supported mode manually
Signal
Resolution
Horizontal
Frequency
(kHz)
Verticla
Frequency
(Hz)
HD / SD
-
-
ATV(CVBS)
SD
-
-
Component
HD / SD
-
-
1024X768
48.36
1360X768
47.71
Input
DTV
60
HDMI-PC
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board, Frame
Sequential, Row Interleaving, Column
Interleaving
1920X1080
67.5
3840X2160
(Only LA97**,
LA965*,
LA98**,
LM96**)
54
56.25
67.5
24.00
25.00
30.00
2D to 3D, Top & Bottom(Half)
Side by Side(Half)
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
480P
31.5
60
576P
31.25
50
37.5
50
45
60
28.12
50
33.75
60
720p
1080i
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board, Frame
Sequential, Row Interleaving, Column
Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom
27
24
28.12
25
33.75
30
56.25
50
67.5
60
2160p
(Only LA97**,
LA965*,
LA98**,
LM96**)
53.95
54
56.25
61.43
67.5
23.976
24.00
25.00
29.970
30.00
Under 704x480
-
-
2D to 3D
-
2D to 3D, Side by Side(Half),
Top & Bottom
-
50 / 60
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board, Frame
Sequential, Row Interleaving, Column
Interleaving
-
others
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board, Row
Interleaving, Column Interleaving
HDMI-DTV
1080p
Over 704x480
interlaced
USB ,DLNA
(Movie)
Playable 3D video format
Over 704x480
progressive
-
2D to 3D, Side by Side(Half),
Top & Bottom,Checker Board, Row
Interleaving, Column Interleaving
2D to 3D, Side by Side(Half),
Top & Bottom, Checker Board, Frame
Sequential, Row Interleaving, Column
Interleaving
2D to 3D, Top & Bottom(Half),
Side by Side(Half)
SPECIFICATIONS 53
Signal
Input
USB, DLNA
(Photo)
Miracast/Widi
Resolution
Horizontal
Frequency
(kHz)
Verticla
Frequency
(Hz)
Playable 3D video format
Under 320x240
-
-
2D to 3D
Over 320x240
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
1024X768p
-
30 / 60
1280x720p
-
30 / 60
1920X1080p
-
30 / 60
Others
-
-
2D to 3D, Side by Side(Half),
Top & Bottom
2D to 3D
ENGLISH
ENG
3D supported mode manually
Please contact LG First.
If you have any inquiries or comments,
please contact LG customer information centre.
Customer Information Centre
Country
Country
Service
Service
0 810 144 131
0900 543 5454
015 200 255
800 187 40
0032 15 200 255
801 54 54 54
07001 54 54
808 78 54 54
810 555 810
031 228 3542
8088 5758
0850 111 154
0800 0 54 54
3220
902 500 234
54
0770 54 54 54
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
* 01806 11 54 11
* 0,20€ pro
Anruf aus dem
Festnetz der DTAG;
Mobilfunk: max.
0,60€ pro Anruf
MODEL
801 11 200 900,
210 4800 564
0844 847 5454
SERIAL
06 40 54 54 54
800 9990
0818 27 6955
0 800 303 000
199600099
8 820 0071 1111
8 8000 805 805,
2255(GSM)
80200201
8 800 120 2222
880008081
8 0000 710 005
Latvija
0848 543 543
8 800 200 7676
Download PDF