LG | MZ-42PZ45V | LG MZ-42PZ45V Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0388E-2/2
cover
require
and quote this infor-
service.
(RF03FA/B, 100ATX, 373-026H, EN)
LG Plasma Monitor
What is
a
Plasma
Display
?
If voltage is inputted to gas in glass panels, ultraviolet rays is outputted and fused with a fluorescent
light is emitted. A Plasma Display is a next generation flat Display using this phenomenon.
160°
-
Wide
A Plasma
substance. At this moment,
range of vision
angle
Display provides
than 160°
more
angle
range of vision
so
that you
can
get
a
without distortion from any
picture
direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
screen
The
screen
of
a
Plasma
Multimedia Plasma
A Plasma
and
The
Display
Display
is 42"
(or 50")
that you
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
can
so
a
computer
so
that you
can
it
use
as a screen
for
conference, game, internet
so on.
explanation
about coloured dots may be present
The PDP which is the
display
device of this
is
product
composed
in the manufacture of the PDP. Several coloured dots visible
on
PDP
screen
of 0.9 to 2.2 million cells and
on
the
screen
would be
a
few cell defects
acceptable,
manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
sponds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
The
explanation
In the
same
about noise of 42"
way that
a
fan is used in
reliability of this product. Therefore,
any negative effect on its efficiency
a
a
(or 50")
PC to
keep
It
means
that it is not
which
corre-
PDP
the CPU
cool, the PDP is equipped with cooling fans
certain level of noise could
occur
to improve the
operated. This noise doesn't have
difficulty while using this product. The
when the fan is
and
liability and it's also determined to have no
operation of this product. We hope you will understand
changeable nor refundable.
noise from the fans is normal in the
acceptable.
can occur
in line with other PDP
that
a
certain level of noise is
WARNING
MZ-42/50PZ45/47
product
may
(or MZ-42/50PZ91/93)
cause
series
This is Class A
:
radio interference in which
case
the
user
product. In a domestic environment this
may be required to take adequate mea-
sures.
WARNING
MZ-42/50PZ44/46
product
may
(or MZ-42/50PZ90/92)
cause
series
radio interference in which
This is Class B
:
case
the
user
product. In a domestic environment this
may be required to take adequate mea-
sures.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Plasma Monitor
Contents
Contents
Safety Warnings
Safety
Instructions ......................................................................................4
Introduction
Remote Control
Key
Functions ..................................................................6
Controls of the Monitor ...............................................................................7
Connection
Options ....................................................................................8
Installation
External
Equipment Viewing Setups ..........................................................9
Displayable Monitor Specification .............................................................11
Monitor Installation Options ......................................................................13
Operation
Turning
on
the Monitor .............................................................................14
On-Screen Menu
Language Selection (option) ........................................14
Options
PSM (Picture Status Memory)..................................................................15
Adjusting Auto Colour Control ..................................................................15
Manual Colour Temperature Control ........................................................15
Picture Menu
Manual Picture Control .............................................................................15
Sound Menu
Options
(Sound Status Memory)...................................................................16
AVL (Auto Volume Leveler) ......................................................................16
Adjusting Sound Control...........................................................................16
Time Menu Options
Setting the Clock ......................................................................................17
Setting the On/Off Timer...........................................................................17
Auto Sleep ................................................................................................17
Sleep Timer ..............................................................................................17
Special Menu Options
SSM
Child lock ..................................................................................................18
ISM Method ..............................................................................................18
Low Power ................................................................................................19
Menu Rotation for Vertical
Viewing ..........................................................19
Options
Auto adjustment........................................................................................20
Setting Picture Format..............................................................................20
Screen Menu
Picture Size Zoom ....................................................................................20
Screen Position ........................................................................................21
Manual
Configure .....................................................................................21
Adjustments..................................................................................21
Initializing ..................................................................................................22
Selecting Wide VGA mode .......................................................................22
Screen
Luminance Noise Reduction ....................................................................22
Split Zoom ................................................................................................22
PIP (Picture In Picture) Feature
Watching PIP ............................................................................................23
Selecting a Input Signal Source for the PIP ..............................................23
Moving the PIP .........................................................................................23
PIP Size ....................................................................................................23
PIP
Aspect
Ratio ......................................................................................23
Miscellaneous
External Control Device
Setup .................................................................24
(NEC format) ..............................................................................30
Troubleshooting Checklist ........................................................................34
Product Specifications ..............................................................................35
IR Code
After
reading
this
manu-
al, keep it in the place
where the
always
user can
contact
easily.
Owner's Manual
3
Safety Warnings
Instructions
Safety
Safety
Use the Monitor at the
-
lower than the altitude of 6562 feet
place
(2000m)
to
get the best quality of picture
and sound.
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
Do not
use
room or
fire.
the Monitor in
any
This may
-
cause a
place
cause a
Do not
-
damp place such as a bathlikely to get wet.
where it is
fire
could
or
give
an
electric shock.
In
cable
antenna
building
to
and
damaged
damaged
of smoke
or
the Monitor
could
give
an
electric
strange smell from the Monitor,
,unplug it from the
your dealer
or
This may
cleaning.
or
wall outlet and contact
service center.
cause a
fire
or
could
give
an
electric shock.
outside
Do
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
case
water the Monitor while
cause
switch it off
-
Bend
use
This may
shock.
inside the Monitor and could
not
attempt
to
Contact your dealer
-
This may
shock.
cause
service
or
the
Monitor
yourself.
service center.
damaged
the Monitor
or
could
give
an
electric
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
a
danger
of
electric shock caused
-
If
er
grounding
should be
methods
are
employed
not
During
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
possible, a separate circuit breakby a qualified electrician.
and installed
-
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
Power
supplier
Short-circuit
breaker
-
Do not connect
ground
to
telephone wires, lightning
rods
or
gas
pipe.
Do not
placing anything containing liquid
on
top of
the Monitor.
This may
-
cause a
Do not insert any
This may
-
Do not
or
could
cause
give
an
or
could
serious
injury
give
on
to
a
an
4
This set is
vent.
electric shock.
the Monitor.
child
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
-
cause a
fire
or
adult.
only
with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
supplied
Plasma Monitor
Safety Warnings
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
of the
damage
or
death.
product.
Take
of
care
under
danger that may happen
specific condition.
NOTES
MZ-42/50PZ44
be mounted
(or MZ-42/50PZ90) series is designed
horizontally (wide viewing).
Never touch the power
-
This may
cause an
plug with
a
to
Do not
-
remove
all
Do not
This may
Do not
moving.
-
place the Monitor
bookcase
Ventilation
or
in
a
when
unplugging.
across
any hot
cause a
fire
or an
electric shock.
connec-
aged
as a
plug
fire.
objects
-
tions before
cord but the
cause a
Ensure the power cord doesn't trail
like a heater.
wet hand.
electric shock.
Disconnect from the mains and
pull the
This may
built-in installation such
plug
or
the
when the power cord or the plug is damof the power outlet is
connecting part
loose.
-
rack.
This may
cause a
fire
or an
electric shock.
required.
Dispose of used batteries carefully
eating them.
to
protect
child
a
from
-
In
case
When
that it eats them, take it to
see a
doctor
immediately.
moving the Monitor assembled with speakers
holding the speakers.
do not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
When
to
-
installing the Monitor on
place the edge of its stand.
a
table,
be careful not
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
This may
shock.
cause
damaged
the Monitor
or
could
give
an
electric
a
Contact the service center
once a
year to clean the
internal part of the Monitor.
-
Accumulated dust
can cause
mechanical failure.
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
screen.
-
If not, eyes will strain.
Unplug the Monitor
from the wall outlet when it is left
unattended and unused for
-
Do not
place
an
outside antenna in the
overhead power lines
circuits.
-
This may
cause an
or
other electric
vicinity of
light or power
Accumulated dust may
deterioration or electric
Only
electric shock.
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
enough distance between
an
outside
antenna and power lines to keep the former from
touching the latter even when the antenna falls.
-
This may
cause an
electric shock.
Owner's Manual
5
Introduction
Remote Control
Control
-
-
When
Functions
Key
using the remote control aim it at the remote control sensor of the Monitor.
maybe a defect in consecutive operation of remote control in specified brightness according
There's
to this monitor
feature.
INPUT SELECT
POWER
Switches the Monitor
by
on
or
from stand-
off to
standby.
POWER
I/II/*
MULTIMEDIA
Selects the
MULTIMEDIA
INPUT SELECT
ARC
the
Changes
picture
PIP/DW
Switches the sub
picture
ARC
I/II/
PIP/DW
TEXT/
format.
on or
off
PR-/
PR+/
dual lan-
language during
guage broadcast.
Selects the sound output.
TEXT/*
These buttons
are
used for teletext.
PR+/*orPR-/*
Selects
a
program for the sub
picture.
SWAP
MUTE
SWAP
Alternates between main and sub
PIP INPUT
MENU
PR
MUTE
Switches the sound
on or
off.
pic-
ture.
PIP INPUT
Selects the
input
OK
OK
VOL
mode for the sub
VOL
Δ/Ε
picture.
Selects
a menu
Φ / Γ
(Volume button)
WIN.SIZE
Adjusts
the sub
picture
size.
Increases/decreases sound level.
WIN.POSITION
PR
Adjusts
MovesthesubpicturetoΔ/ΕorΦ/Γ
direction.
1
2
3
4
5
6
previously
7
8
9
PSM
0
SSM
on screen menus one
by
menu
SIZE
UPDATE
TIME
LIST
HOLD
MIX
changes.
INDEX
MODE
NUMBER buttons
M
Displays
WIN.SIZE
SLEEP
SPLIT ZOOM
ZOOM-
ZOOM+
STOP
P/STILL
Enlarges
REW
PLAY
FF
Installing
screen
with
or
reduces the main
VCR BUTTONS
regular
Controls
ration.
recorder.
a
LG video cassette
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
Plasma Monitor
cover on
new
batteries.
the back side and
polarity.
Install two 1.5V alkaline batteries of AAA
batteries with
6
timer.
size.
SPLIT ZOOM
the
sleep
ZOOM+ / ZOOM-
REC
the
Enlarge
SLEEP
Sets the
factory preset picture
according to the room.
the program table.
LIST
WIN.POSITION
PSM
Adjusts
?
one.
menu.
Exits the current
Memorizes
REVEAL
appropriate to
viewing program character :
Flat, Speech, Movie, Music, or User
your
programme.
Displays
settings.
To select the sound
viewed
MENU
menu
SSM
SWAP
Returns to the
option.
type. Don't mix used
picture
Introduction
Controls
Controls of
of the Monitor
-
-
Shown is
a
simplified representation
of the Monitor.
Here shown may be somewhat different from your set.
<Front Panel Controls>
INPUT
SELECT
ON/OFF
Main Power Button
MENU
VOL.
Δ,Ε Buttons
INPUT SELECT Button
VOLUME
Remote Control Sensor
MENU Button
(Φ,Γ) Buttons
Power
Standby Indicator
standby mode,
Illuminates red in
Illuminates green when the
Monitor is turned on
<Back Panel>
()R ()
RS-232C
INPUT
R AUDIO L
()L ()
RS-232C INPUT
EXTERNAL SPEAKER
(CONTROL/SERVICE)
DVI INPUT
RGB INPUT
AUDIO INPUT
EXPANDED
RGB OUTPUT
INPUT
AUDIO INPUT
RGB
OUTPUT
RGB INPUT
PB
Connection to PC
EXPANDED
INPUT
PR
R AUDIO L (MONO)
REMOTE
CONTROL
COMPONENT INPUT
AUDIO
INPUT
AUDIO
INPUT
DVI INPUT
Y
S-VIDEO
VIDEO
INPUT
AUDIO INPUT
S-VIDEO
INPUT
AUDIO
INPUT
VIDEO
COMPONENT INPUT
Connection to AV
AC INPUT
INPUT
equipment
Note: The connection cables shown above to the
A D-sub
15-pin
cable and
a
DVI cable
are
right are not included with the Monitor.
provided to connect the Monitor to a PC.
Owner's Manual
7
Introduction
Connection
Connection
Options
Options
<Back Panel>
RCA
Type
()R ()
1
Scart
Y
AUDIO
()L ()
2
3
PB
4
PR
AUDIO
5
(MONO)
6
Type
()R ()
()L ()
5
1.
EXTERNAL SPEAKER OUTPUT
Connect to
*
For further
(8 ohm)
speaker(s).
information, refer to 'Speaker & Speaker
optional
5.
external
AUDIO INPUT SOCKETS
Stand'
EURO SCART SOCKET
manual.
2.
RS-232C
INPUT(CONTROL/SERVICE)
Connect to the RS-232C
3.
port
on a
Note
PORT
on
PC.
output socket of the PERSONAL COM-
PUTER to this socket.
RGB OUTPUT SOCKET
You
can
watch the RGB
signal
on
another
RGB OUTPUT to another monitor's PC
4.
monitor,
input port.
EXPANDED INPUT SOCKET
Connect the PDP Tuner Cable to PDP Tuner.
8
Plasma Monitor
:
The interface board
connect
(AP-42/50EA42/43) is not equipped
(or MZ-42/50PZ90/91/92/93)
your dealer for buying this optional
MZ-42/50PZ44/45/46/47
series models. Contact
item.
DVI INPUT / RGB INPUT / AUDIO INPUT SOCKETS
Connect the monitor
AUDIO / COMPONENT INPUT / S-VIDEO / VIDEO INPUT /
6.
POWER CORD SOCKET
This Monitor
operates
cated
Specifications page.
on
the
the Monitor
on
on an
DC power.
AC power. The voltage is indiNever attempt to operate
Installation
External
VCR (When the Interface board is installed.)
Watching
The interface board
-
When
Audio
-
-
-
Connect the VIDEO INPUT socket
equipped
equipment,
(yellow)
on
MZ-42/50PZ44/45/46/47
match the colours of
with the BNC-RCA
adaptor
(or MZ-42/50PZ90/91/92/93)
connecting ports (Video
to the VIDEO INPUT
on
-
yellow,
series models.
Audio
-
white,
the Monitor.
a
regular
connect the Euro scart socket of the VCR to the Euro scart socket of the monitor.
Use the orbiter function to Avoid
having
a
fixed
image
remain
on
the
for
screen
a
from
If
picture format is used; the fixed image may remain visible on the screen.
picture noise (interference), leave an adequate distance between the VCR
4:3
a
a
of time.
long period
picture
Typically
a
frozen still
VCR.
To avoid
(If
(L)
input.
1. Use the INPUT SELECT button
the remote control to select AV
on
or
(AV1
or
AV2
and Monitor
).
connected to
2. Insert
a
S-VIDEO, select the S-Video external input source.)
video tape into the VCR and press the PLAY button on the VCR. (See VCR
owner 's
manual)
Cable TV (When the Interface board is installed.)
Watching
-
is not
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO (L/MONO) input on the Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting
Or,
-
(AP-42/50EA42/43)
the Monitor to external
connecting
(R) -red).
VCR to the Video
-
V iewing Setups
Equipment Viewing
Setups
The interface board
(AP-42/50EA42/43)
After
a
is not
equipped
on
MZ-42/50PZ44/45/46/47
(or MZ-42/50PZ90/91/92/93)
series models.
cable TV service from a local provider and installing a converter, you can watch cable TV programming.
display TV programming unless a TV tuner device or cable TV converter box is connected to the Monitor.
information regarding cable TV service, contact your local cable TV service provider(s).
subscribing
to
This monitor cannot
-
For further
1. Use the INPUT SELECT button
2. Tune to cable service
The interface board
When
the remote control and select AV
on
channels
using
(AV1
or
or
AV2
).
the cable box.
external AV
Watching
-
provided
connecting
source (When the Interface board is installed.)
(AP-42/50EA42/43) is not equipped on MZ-42/50PZ44/45/46/47 (or MZ-42/50PZ90/91/92/93)
the monitor to
an
external source, match the colours of AUDIO/VIDEO
input jacks
output jacks on the audio/video equipment: Video yellow, Audio (Left) white, Audio (Right)
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the monitor.
=
1. Use the INPUT SELECT button
2.
the
Operate
corresponding
=
equipment.
See external
?
MZ-
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
Or,
inputs
inputs
to
the monitor with the
or (AV1 or AV2 ).
equipment operating guide.
DVD (When the Interface board is installed.)
The interface board (AP-42/50EA42/43) is not equipped on
42/50PZ44/45/46/47 (or MZ-42/50PZ90/91/92/93) series models.
audio
on
red.
the remote control to select AV
on
external
Watching
How to connect
Connect DVD video
=
series models.
below.
Y, PB, PR of COMPONENT INPUT and
Component ports
to Audio sockets of AUDIO INPUT.
of the
Monitor
connect the Euro scart socket of the VCR to the Euro scart socket
YPBPR
of the monitor.
How to
1. Turn
2. Use
Video
use
on
the DVD
INPUT
player,
SELECT
Component or (AV1 or
operating instructions.
and insert
button
AV2
).
a
of DVD
DVD.
remote
control
Refer to the DVD
player's
on
the
output ports
to
select
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
manual for
Owner's Manual
9
Installation
External
PC
Connecting
-
-
-
-
-
V iewing Setups
Equipment Viewing
Setups
To
enjoy vivid picture and sound, connect a PC to the Monitor.
Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Connect PC to the RGB INPUT(PC INPUT) or DVI INPUT(DIGITAL RGB INPUT) port of the Monitor; change the resolution output of PC accordingly.
There might be a noise according to some resolution, vertical pattern, contrast or brightness in PC mode. Then change
the PC mode into other resolution or change the refresh rate into other rate or adjust the brightness and contrast on the
menu until the picture is clean. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card
or consult it to the manufacturer of the PC graphic card.
The synchronization input form for Horizontal and Vertical frequencies is separate.
Setup Instructions to Connect a
We recommend using 640x480,
-
In MZ-50PZ46/47/92/93
series,
PC to your Monitor
60Hz for the PC mode,
we
recommend
they provide the best picture quality.
using 1024x768, 60Hz for the PC mode, they provide
the best
picture
quality.
-
-
-
-
-
If the resolution of PC is
UXGA, there will be no picture on the Monitor.
output port of the PC to the RGB INPUT(PC INPUT) port of the Monitor
signal cable from the DVI output port of the PC to the DVI INPUT(DIGITAL RGB INPUT) port on the Monitor.
Connect the
signal
over
cable from the monitor
Connect the audio cable from the PC to the Audio
If
using
a
sound
card, adjust PC sound
as
input
required.
on
the Monitor.
(Audio
cables
are
not included with the
This monitor
-
-
-
-
PC
Setup
1. Turn
on
the PC and
2. Turn
on
the
apply power to
display by pressing the
3. Use the INPUT SELECT button
4. Set the resolution
10
the
Monitor).
apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC proadjusts automatically to use this monitor.
DDC protocol is preset for RGB (Analog RGB), DVI (DVI, Digital RGB) mode.
If required, adjust the monitor settings for Plug and Play functionally.
If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB INPUT
(PC INPUT) or DVI INPUT (DIGITAL RGB INPUT) to display the PC on the monitor.
If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB or DVI; (the
other mode is set to Plug and Play automatically by the monitor.)
DOS mode may not work depending on video card if using a DVI-I cable.
To see a normal picture, match the VGA mode and DVI signal (640x480, 848x480, 852x480, 1360x768 or 1366x768).
(See page 11)
tocol. The PC
-
or
on
output of the PC
Plasma Monitor
the Monitor.
POWER button
on
the Monitor's remote control.
the remote control to select the RGB
to SXGA
or
under
(1280
x
or
1024, 60Hz).
DVI
input
source.
Installation
Displayable
Monitor
Specification
Specification
RGB / DVI mode
Resolution
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
Resolution
640x350
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
37.861
85.08
31.469
70.08
640x350
720x400
31.469
70.08
37.927
85.03
37.927
85.03
31.469
59.94
31.469
59.94
35.000
66.66
35.000
66.66
37.861
72.80
37.861
72.80
37.500
75.00
37.500
75.00
43.269
85.00
43.269
85.00
31.500
60.00
31.500
60.00
35.000
70.00
35.000
70.00
37.500
75.00
37.500
75.00
31.500
60.00
31.500
60.00
35.000
70.00
37.799
70.00
37.500
75.00
39.375
75.00
35.156
56.25
35.156
56.25
37.879
60.31
37.879
60.31
46.875
75.00
48.077
72.18
53.674
85.06
720x400
640x480
848x480
852x480
640x480
848x480
852x480
800x600
800x600
832x624
1024x768
46.875
75.00
53.674
85.06
832x624
1024x768
49.725
74.55
48.363
60.00
56.476
70.06
60.023
75.02
47.700
60.00
49.725
74.55
48.363
60.00
54.476
70.06
60.023
75.02
59.625
75.02
54.348
60.05
47.700
60.00
63.995
70.01
59.625
75.02
54.348
60.05
63.995
70.01
1360x768
1366x768
1152x864
67.500
75.00
1152x870
68.681
75.06
1280x960
60.000
60.00
1280x1024
63.981
60.02
MZ-42PZ44/45/90/91 series
1152x864
67.500
75.00
1280x960
60.000
60.00
1280x1024
63.981
60.02
MZ-50PZ46/47/92/93 series
Owner's Manual
11
Installation
Accessories
POWER
MULTIMEDIA
INPUT SELECT
ARC
I/II/
PIP/DW
TEXT/
PR-/
PR+/
SWAP
PP NPUT
MENU
PR
MUTE
OK
VOL
VOL
PR
1
2
4
5
7
1.5V
1.5V
ASmark
Owner's Manual
D-sub 15
Optional
-
pin
cable
adaptor
(optional)
Power Cord
SSM
SIZE
MIX
INDEX
MODE
UPDATE
TIME
M
LIST
WINPOSITION
WINSIZE
SLEEP
SPLITZOOM
ZOOM-
ZOOM+
REW
BNC-RCA
9
0
?
HOLD
STOP
Alkaline batteries
3
6
8
PSM
REVEAL
LG TV
P/STILL
PLAY
REC
FF
Remote Control handset
Phone scart cable
DVI-D Cable
(Optional)
Extras
Optional
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
-
Contract your dealer for
Tilt wall
mounting
buying
bracket
these items.
Wall
Desktop
Video cables
12
Plasma Monitor
mounting
bracket
Ceiling mounting
stand
bracket
Desktop Speaker
Audio cables
Vertical Wall
mounting
stand
Speakers
bracket
Installation
Monitor Installation
?
The Monitor
?
Install this monitor
?
This monitor is
can
Options
Options
be installed in different ways such as on a wall, or on a desktop etc.
only in a location where adequate ventilation is available.
designed
so
that it
be mounted either
can
horizontally
or
vertically.
Wall Mount: Vertical Installation
Wall Mount: Horizontal Installation
MZ-42/50PZ91/93)
series
(MZ-42/50PZ45/47 (or
only)
yyyyyy
yyyyyy
yyyyyy
yyyyyy
yy
?
The monitor
yy
can
be installed
on a
wall
as
shown
?
above.
?
(For further information, refer to the optional
'Wall Mounting Bracket Installation and Setup Guide'.)
Speakers are optional, and are shown for illustration
only.
The monitor
can be installed vertically on the wall as
above.(For further information, refer to the
optional 'Wall Mounting Bracket Installation and Setup
Guide'.)
Caution: When installing the monitor vertically, the
front panel controls must be in the left-down side posi-
shown
tion
?
?
as
shown above.
Speakers
only.
Note: To
source's
Desktop
?
are
use
optional,
and
the Monitor in
image
are
a
shown for illustration
vertical
must also be in
a
orientation, the
vertical format.
Pedestal Installation
The Monitor
can
be mounted
on a
desk
as
shown
above.
?
(For further information, refer to the optional
'Desktop Stand Installation and Setup Guide'.)
Speakers and speaker stands shown are optional, and
are shown for example only.
Owner's Manual
13
Operation
Caution
When
installing the monitor vertically, you have to change the menu display
correctly and also to protect the monitor from overheating (Refer to p. 19).
Install this monitor only in a location where adequate ventilation is available.
?
?
To Mount
on a
Wall
To Install
Wall mount minimum allowable clearances for
so
that the
adequate
Desktop
ventilation.
2 inches
4 inches
4 inches
4 inches
4 inches
4 inches
4 inches
Turning
Turning
When
1. Connect power cord
2. Press the
the Monitor
on
on
control, aim it
the Monitor
on
standby
2.36 inches
the remote
using
Turning
Turning
ON/OFF button
Press the
was
on
on
Press the
was
turned off with the
on
press the
menus can
ON/OFF button
on
the Monitor to turn the Monitor
the Monitor
on.
on
on
the Monitor
the Monitor and then press the INPUT SELECT button on the
on the remote control to turn the Monitor
POWER, INPUT SELECT button
be shown
on
the
screen
1. Press the MENU button and then
in the selected
use Δ
language.
First select your
/ Ε button to select the SPECIAL
language.
menu.
use Δ
/ Ε button to select
3. Press the Γ button and then
use Δ
/ Ε button to select your desired language.
will be shown in the language of your choice.
point
on, the
on-screen menus
4. Press the MENU button.
Plasma Monitor
on.
Selection (option)
Language Selection
(option)
2. Press the Γ button and then
From this
14
connected)
turned off with the remote control and the ON/OFF button
ON/OFF button
or
cord is still
On-Screen
On-Screen Menu
The
the Monitor. At this moment, the Monitor is switched to
on the Monitor or press the POWER,
the remote control and then the Monitor will switch on.
(power
ON/OFF button
2. If the Monitor
-
the Monitor.
correctly.
the Monitor
on
Monitor
sensor on
mode. Press the INPUT SELECT button
1. If the Monitor
?
at its
after installation
just
INPUT SELECT button
?
will appear
2 inches
4 inches
-
menus
Pedestal mount minimum allowable clearances for
ventilation.
adequate
on a
mode
Language.
Operation
Picture Menu
PSM
-
-
Options
Options
(Picture Status Memory)
This function
adjusts the Monitor to the best picture appearance.
adjusting picture options (contrast, brightness, colour, sharpness
automatically changed to User.
When
is
and tint
(NTSC input only)) manually,
PSM
1. Press the PSM button.
?
Each press of the PSM button
changes
You
?
Picture
-
display
as
shown below.
Mild
User
also select Dynamic, Standard, Mild or User in the PICTURE menu.
options Dynamic, Standard and Mild are preset and programmed for good picture quality
factory and cannot be changed.
Adjusting
-
screen
Standard
Dynamic
?
the
can
at the
Auto Colour Control
To initialize values (reset to default settings), select the Normal option.
When adjusting color temperature options (red, green, or blue) manually, CSM is
1. Press the MENU button and then
use
Δ / Ε
button to select the PICTURE
automatically changed
to User.
PICTURE
menu.
PSM
2. Press the Γ
button and then
use Δ / Ε
CSM
button to select CSM.
Γ
Colour
3. Press the Γ
button and then
use Δ / Ε
button to select the desired colour
tempera-
ture.
Normal
Cool
Temp.
Contrast
Warm
100
Brightness
60
Colour
50
Sharpness
50
User
4. Press the MENU button.
MENU Prev.
Manual Colour
-
You
can
Temperature
adjust red,
green,
or
Control
(User option)
blue to any colour
1. Press the MENU button and then
use Δ / Ε
temperature you prefer.
button to select the PICTURE
menu.
PICTURE
PSM
2. Press the Γ button and then
use Δ / Ε
button to select Colour
3. Press the Γ button and then
use Δ / Ε
button to select
Temp..
CSM
Colour
4. Use the
Φ / Γ
button to make
colour.
appropriate adjustments.
Γ
Temp.
Contrast
a
100
Brightness
60
Colour
50
Sharpness
50
Red
+5
Green
0
Blue
-5
5. Press the MENU button.
?
The
adjustment
range of Red, Green and Blue is -10~+10.
Manual Picture Control
-
You
can
MENU Prev.
(User option)
adjust picture contrast, brightness, colour, sharpness
1. Press the MENU button and then
use Δ / Ε
and tint to the levels you
button to select the PICTURE
prefer.
menu.
PICTURE
PSM
2. Press the Γ
button and then
3. Press the Γ button and then
4. Press the MENU button.
use Δ / Ε
use Φ /
button to select the desired
Γ button to make
picture option.
appropriate adjustments.
CSM
Colour
Temp.
Contrast
100
Brightness
60
Colour
50
Sharpness
50
Γ
MENU Prev.
Owner's Manual
15
Operation
Sound
Sound Menu
SSM
-
-
Options
Options
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects
the appropriate sound option based on the program content.
When adjusting sound options (treble, bass, and balance) manually, SSM is automatically changed to User.
1. Press the SSM button.
2. Press the SSM button to select your desired sound.
Flat
?
AVL
-
You
can
(Auto
Movie
Speech
also select
Volume
Flat, Speech, Movie, Music,
or
Music
User in the SOUND
User
menu.
Leveler)
This feature maintains
an
equal
volume
1. Press the MENU button and then
level;
use
even
Δ / Ε
if you
change
channels.
button to select the SOUND
SOUND
menu.
SSM
2. Press the Γ
3. Press the Γ
button and then
button and then
use
use
Δ / Ε button to select AVL.
AVL
Δ / Ε button to select On or Off.
Γ
Treble
50
Bass
50
Balance
0
4. Press the MENU button.
MENU Prev.
Adjusting
Sound Control
(User option)
1. Press the MENU button and then
use Δ / Ε
button to select the SOUND
SOUND
menu.
SSM
2. Press the Γ button and then
use Δ / Ε
3. Press the Γ button and then
use Φ /
button to select the desired sound item.
Γ button to make
appropriate adjustments.
AVL
Treble
50Γ
Bass
50
Balance
4. Press the MENU button.
MENU Prev.
16
Plasma Monitor
0
On
Off
Operation
Time Menu Options
Options
the Clock
Setting
If current time
-
button
on
setting
the
monitor,
is erased
by
a
power
failure, if TV is unplugged
if the monitor is turned off with the
or
ON/OFF
reset the clock.
1. Press the MENU button and then
use Δ
/ Ε
button to select the TIME
TIME
menu.
Clock
2. Press the Γ button and then
/ Ε button to select Clock.
use Δ
Γ
:
--
--
Off Time
On Time
Auto
3. Press the Γ button and then
use Δ
/ Ε button to
adjust
the hour.
4. Press the Γ button and then
use Δ
/ Ε button to
adjust
the minute.
Sleep
5. Press the MENU button.
MENU Prev.
the On/Off Timer
Setting
-
-
-
Timer function
operates only if
Off Timer function overrides
The monitor must be in
current time has been
Timer function if
on
they
already
set.
set to the
are
same
time.
mode for the On Timer to work.
standby
1. Press the MENU button and then
use Δ
/ Ε button to select the TIME
TIME
menu.
Clock
2. Press the
button and then
use Δ
/ Ε button to select Off Time
3. Press the Γ button and then
use Δ
/ Ε button to select On.
4. Press the Γ button and then
use Δ
/ Ε button to
adjust
the hour.
5. Press the Γ button and then
use Δ
/ Ε button to
adjust
the minute.
6.
Only
ume
Γ
On Time
level.
function; Press the
Γ
button and then
use Δ
or
On Time.
Off Time
On Time
Auto
Γ
Sleep
On
Off
12
Vol.
/ Ε button to
adjust
vol-
:
00
30
MENU Prev.
7. Press the MENU button.
-
To cancel Off/On Time function
Press the Δ / Ε button to select Off in
Auto
-
step
3.
Sleep
If there is
no
input signal,
the monitor turn off
1. Press the MENU button and then
use Δ
automatically
/ Ε
after 10 minutes.
button to select the TIME
TIME
menu.
Clock
2. Press the Γ button and then
use Δ
/ Ε button to select Auto
3. Press the Γ button and then
use Δ
/ Ε button to select On or Off.
Sleep.
Off Time
On Time
Auto
Sleep
Γ
On
Off
4. Press the MENU button.
MENU Prev.
Sleep
-
-
Timer
Sleep
timer turns the Monitor off at the
preset time.
zz
Press the SLEEP button to select the number of minutes. The
lowed
by 10, 20, 30, 60, 90, 120,
a.
To check the
b.
To cancel the
c.
If you turn
180 and 240. The timer
display
begins to count
Min will appear on the screen, foldown from the number of minutes selected.
---
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
Min appears.
Owner's Manual
17
Operation
Menu
Special
Special
In
-
some
Options
Options
models, the OSD Rotate will
not
display.
Child lock
The monitor
-
be set up
can
so
that it
can
1. Press the MENU button and then
2. Press the Γ button and then
only
use
be used with the remote control.
button to select the SPECIAL
Δ / Ε
menu.
SPECIAL
Language
/ Ε button to select Child Lock.
use Δ
Child Lock
Γ
/ Ε
use Δ
button to select On
or
On
Off
ISM Method
3. Press the Γ button and then
Set ID
Off.
Low Power
OSD Rotate
4. Press the MENU button.
MENU Prev.
This monitor
-
programmed
In Child Lock
-
INPUT SELECT
on
pressed
ISM
while
option
it
was
last set to event if you turn the monitor off.
on the monitor or POWER and
the remote control.
With the Child Lock
-
to remember which
'On', if the monitor is turned off, press the INPUT SELECT button
On, the display
viewing
'
Child Lock' appears
on
the
screen
if any button
on
the front
panel
is
the monitor.
(Image Sticking Minimization)
Method
Frozen still
picture from a PC/video game displayed on the screen for prolonged periods will result in an ghost
image remaining even when you change the image. Avoid allowing a fixed image to remain on the Monitor's
screen for a long period of time.
-
1. Press the MENU button and then
use Δ / Ε
button to select the SPECIAL
menu.
SPECIAL
Language
Child Lock
2. Press the Γ button and then Δ
/ Ε
3. Press the Γ button and then Δ
Orbiter
?
or
Set ID
permanent images from the
nent image may be impossible
viewing, press the any button.
to clear
entirely
Note: An excessive permawith White Wash. To return to normal
screen.
Orbiter:
Orbiter may help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen, the
screen
?
will
move
every 2 minutes.
Inversion:
This is the function to invert the
ly
inverted every 30 minutes.
4. Press the MENU button.
18
Plasma Monitor
Inversion
White Wash
MENU Prev.
removes
panel
color of monitor. The
panel
color is automatical-
Normal
Orbiter
OSD Rotate
Normal, White wash,
this function, set Normal.
White wash:
Γ
Low Power
button to select either
Inversion. If you unnecessary to set
White Wash
?
/ Ε
ISM Method
button to select ISM Method.
Operation
Low Power
-
This is the function to reduce the power
1. Press the MENU button and then
2. Press the Γ button and then
use
consumption
use Δ / Ε
Δ / Ε
of the monitor.
button to select the SPECIAL
SPECIAL
menu.
Language
button to select Low Power.
Child Lock
ISM Method
3. Press the
Γ
button and then
button to select On
use Δ / Ε
or
Set ID
Off.
Low Power
Γ
On
Off
OSD Rotate
4. Press the MENU button.
MENU Prev.
Menu Rotation for Vertical
Viewing (For
1. Press the MENU button and then
2. Press the Γ button and then
MZ-42/50PZ45/47
use Δ / Ε
use Δ / Ε
(or MZ-42/50PZ91/93)
button to select the SPECIAL
series models
menu.
button to select OSD Rotate.
only)
SPECIAL
Language
Child Lock
ISM Method
3. Press the Γ button and then
?
Select Normal
?
Select Rotate
:
:
use
the Δ
/ Ε
button to select Normal or Rotate.
if the monitor is installed
if the monitor is installed
horizontally.
vertically.
Set ID
Low Power
OSD Rotate
Γ
Normal
Rotate
4. Press the MENU button.
MENU Prev.
Owner's Manual
19
Operation
Screen
Screen Menu
Auto
-
Options
Options
mode
adjustment (RGB [PC]
only)
Automatically adjusts picture position
and minimizes
1. Press the MENU button and then
use Δ
image shaking.
/ Ε button to select the SCREEN
SCREEN
menu.
Auto
2. Press the Γ button and then
use Δ
3. Press the Γ button to start Auto
?
When Auto
?
If the
4. If
needs to be
picture
-
-
-
-
-
Position
Configure.
Manual
Screen
finished, OK will be shown on screen.
is still not correct, try Auto adjustment again.
adjusted
after Auto
more
To Set
Γ
Configure
Zoom In/Out
adjustment
in RGB
(PC),
Config.
adj.
Reset
VGA Mode
you
can
adjust
config..
MENU Prev.
image is still not correct, your Monitor is functioning properly but needs further adjustment.
Configure and the Manual config. functions don't need to be run for DVI mode.
function doesn't work in RGB-Digital broadcast.
Although
the
The Auto
This
Picture Format
Setting
-
Configure.
ARC
has
Configure
position of the image
the Manual
button to select Auto
/ Ε
You
can
watch the
You
can
repeatedly
You
can
screen
in various
picture formats; Auto, 4:3,
16:9
(Wide),
press the ARC button to select your desired picture format.
also select Auto, 4:3, 16:9 (Wide), 14:9 and Zoom in the SCREEN
14:9 and Zoom.
menu.
Auto
When your TV receives the wide
mat to be sent.
signal,
screen
it will be
automatically changed
to the
picture
for-
4:3
Following selection will lead you to
appearing at both the left and right
view
a
picture
with
an
original
4:3
aspect ratio, with black bars
sides.
16:9
Following
entire
selection will lead you to adjust the
(useful for viewing 4:3 formatted
screen
picture horizontally,
DVDs).
in
a
linear
proportion,
to fill the
14:9
You
enjoy
can
screen
the
picture
just
14:9 is viewed
format of 14:9
like that the
general
or
screen
4:3 is
TV programme through the 14:9 mode. The
to the left / right.
magnified
Zoom
selection will lead you to view the picture without any alternation, while filling the entire
However, the top and bottom portions of the picture will be cropped.
Following
screen.
Picture Size Zoom
?
When
enlarging
or
reducing
the
picture,
1. Press the ZOOM+/ZOOM- button to
2.
Adjust
the main
picture position
mode.
the
screen
enlarge
with the Δ
or
may be
display
reduce the
/ Ε / Φ / Γ
unnatural
picture
buttons in
picture.
size.
enlarged picture
Zoom In
109%
Δ
Φ
Γ
Ε
20
Plasma Monitor
Operation
Screen Position
-
This function works in the
RGB-PC
-
You
are
or
following mode:
480p/576p/720p/1080i/1152i.
function after adjusting Zoom In/Out in
COMPONENT
available to this
AV
(or AV1, AV2),
S-Video
or
COMPONENT
480i/576i mode.
1. Press the MENU button and then Δ / Ε button to select the SCREEN
menu.
SCREEN
Auto
2. Press the
button and then Δ /
Γ
button to select Position.
Ε
configure
ARC
Zoom In/Out
3. Press the Γ button and then Δ / Ε
or Φ
/ Γ button to
the
adjust
Position
position.
Δ
Γ
Φ
Γ
Ε
Manual
Screen
4. Press the MENU button.
Config.
adj.
Reset
VGA Mode
MENU Prev.
Manual
-
-
Configure (RGB [PC]
If the
isn't clear after auto
picture
phase manually.
To correct the
screen
mode
only)
adjustment
and
especially
that characters
are
still
trembling, adjust
the
picture
size, adjust Clock.
1. Press the MENU button and then Δ / Ε button to select the SCREEN
menu.
SCREEN
Auto
2. Press the Γ button and then Δ / Ε button to select Manual
3. Press the Γ button and then Δ / Ε button to select Phase
config..
or
Configure
ARC
Zoom In/Out
Position
Clock.
Manual
Screen
4. Press the
?
The
?
The
Φ
/ Γ
adjustment
adjustment
button to make
config.
Γ
adj.
appropriate adjustments.
Phase
Clock
Reset
--
--
VGA Mode
31.
range of Phase is 0
+50.
range of Clock is -50
~
~
MENU Prev.
5. Press the MENU button.
Screen
-
Adjustments (AV (or AV1, AV2),
Use this function to correct
jittering
or
1. Press the MENU button and then
S-Video and COMPONENT 480i/576i mode
picture instability
use Δ / Ε
while
viewing
a
video
button to select the SCREEN
only)
tape.
SCREEN
menu.
Auto
2. Press the Γ button and then
3. Press the Γ button and then
?
?
Select the VCR option if
Select the TV option for
use Δ / Ε
use Δ / Ε
button to select Screen
adj..
button to select TV or VCR.
watching a VCR.
other equipment.(Except VCR)
Configure
ARC
Zoom In/Out
Position
Manual
Config.
Screen
adj.
Γ
TV
VCR
Reset
VGA Mode
4. Press the MENU button.
MENU Prev.
Owner's Manual
21
Operation
Screen
Screen Menu
Initializing (Reset
To initialize the
-
Selecting
-
To
see a
original factory value)
to
select Reset with the
adjusted value,
Wide VGA mode
normal
Options
Options
(RGB,
DVI mode
button and then press the Γ button.
Δ / Ε
only)
match the resolution of RGB mode and selection of VGA mode.
picture,
1. Press the MENU button and then
use Δ / Ε
button to select the SCREEN
menu.
SCREEN
Auto
2. Press the Γ button and then
button to select VGA Mode.
use Δ / Ε
Configure
ARC
Zoom In/Out
3. Press the Γ button and then
Position
button to select the desired VGA resolution.
use Δ / Ε
Manual
Screen
4. Press the MENU button.
Config.
adj.
Reset
VGA Mode
Γ
640x480
848x480
852x480
MENU Prev.
Luminance Noise Reduction
-
-
You
can
select On
or
(option)
Off to reduce the
This function works in the
following
AV
or
(AV1
or
S-Video
AV2),
picture
noise which may appear
on
the
during watching
screen
the TV.
mode:
COMPONENT
1. Press the MENU button and then
480i/480p/576i.
use Δ / Ε
button to select the SCREEN
SCREEN
menu.
Auto
2. Press the Γ button and then
button to select YNR.
use Δ / Ε
Configure
ARC
Zoom In/Out
3. Press the Γ button and then
button to select On
use Δ / Ε
or
Position
Off.
Manual
Screen
4. Press the MENU button.
Config.
adj.
Reset
YNR
Γ
On
Off
MENU Prev.
Split
-
-
-
-
-
Zoom
This is the function to
It's available to
enlarge
the
with
screen
ration.
regular
this function in every input source.
It's not available to use this function in Rotate mode.
use
With 2-SPLIT
ZOOM, you
If
enlarged,
1.
a screen
is
can
only
the
move
a screen can move
into upside or downside.
selecting a section of screen.
screen
without
Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
changes
Zoom
2-Split
the
4-Split
Δ
1
screen
1
Ε
display
as
shown below.
Zoom
9-Split
Zoom
123
Δ
2
Ε
Δ
Ε
456
4
In
case
of
4
ΦΓ
9-Split
5
ΦΓ
usingtheΔ/Ε
move
the
enlarged
screen
with
orΦ/Γbutton.
In
Zoom
123
ΦΓ
Zoom:
Press the number button to select the section you enlarge.
If you choose No.5, the 5 section is enlarged and also can
9-Split
789
case
of
choosing
the No.5
Δ
Ε
456
789
ΦΓ
The 5 section is
22
Plasma Monitor
changed
to
a
full
screen.
Operation
PIP
(Picture-in-Picture)
(Picture-in-Picture) Feature
Watching
PIP
Press the PIP/DW button to show the sub
?
Each press of PIP/DW button
changes
picture.
the
screen
display
as
shown below.
PIP
DW1
Off
Selecting
a
Input Signal
Source for the PIP
Press the PIP INPUT button to select the
sub
DW2
input
Moving
source
for the
the PIP
Press the WIN.POSITION button.
picture.
Repeatedly press the
position is achieved.
left/right.
RGB
Δ / Ε or Φ / Γ button until desired
The sub picture moves up/down or
Video
10:30
Win. Position
Δ
ΦΓ
Ε
PIP Size
Press the WIN.SIZE button and then Φ / Γ button to
With WIN.SIZE button in twin
ously.
picture mode,
With WIN.SIZE button in PIP
adjust
main and sub
the sub
picture
picture
is
size.
adjusted
simultane-
mode, sub picture is adjusted.
Win. Size
Φ
PIP
Aspect
Ratio
1. Press the MENU button and then Δ / Ε button to select the PIP/DW
2. Press the
Γ
Γ
button and then Δ /
Ε
button to select PIP ARC.
menu.
PIP/DW
Input
DW
PIP
3. Press the Γ button and then Δ / Ε button to select 4:3
or
16:9.
Sub
Input
Win. Size
Win. Position
4. Press the MENU button.
PIP ARC
Γ
4:3
16:9
MENU Prev.
Owner's Manual
23
Miscellaneous
External Control
Control Device Setup
Connect the RS-232C
-
input jack
to
an
external control device
and control the Monitor 's functions
externally.
How to connect external control
equipment
?
Connect the serial
?
RS-232C connection cables
?
The Monitor remote control and
PC
Type
computer
or
computer
or an
A/V control
are
to the RS-232C jack on the Monitor back panel.
supplied with the Monitor.
front panel controls (except main power) will not be functional
system)
not
if the Monitor is controlled
other external device.
No.
Pin
1
No connection
9-pin
male
1
name
2
RXD
3
TXD
5
(Receive data)
(Transmit data)
(DTE side ready)
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
9
(DCE side ready)
(Ready to send)
(Clear to send)
6
configurations
7-wire
(Standard
3-wire
configuration
(Not standard)
configuration
RS-232C cable)
PC
PDP
RXD
2
3
TXD
PC
PDP
RXD
2
3
TXD
GND
RXD
TXD
3
2
RXD
TXD
3
GND
5
5
GND
GND
5
25
DTR
4
6
DSR
DTR
4
4
DTR
DSR
6
4
DTR
DSR
6
6
DSR
78
8
CTS
RTS
RTS
RTS
CTS
78
7
7
8
CTS
D-Sub 9
D-Sub 9
D-Sub 9
D-Sub 9
RTS
CTS
24
as a
port of the control device
of connector; D-Sub
RS-232C
(such
Plasma Monitor
by
a
Miscellaneous
Set ID
-
-
Use this function to
specify a monitor ID number.
Mapping 1'. See page 29.
Refer to 'Real Data
1. Press the MENU button and then
the Δ
use
2. Press the Γ button and then
use Δ / Ε
3. Press the Γ button and then
use
button to select the SPECIAL
/ Ε
SPECIAL
menu.
Language
button to select Set ID.
Child Lock
ISM Method
Set ID
Φ / Γ button to
adjust
Set ID to choose the desired
Γ
1
Low Power
OSD Rotate
monitor ID number.
?
The
adjustment
range of Set ID is 1
99.
~
MENU Prev.
Communication Parameters
?
Baud rate
?
Data
?
*
:
115200
bps (UART)
length : 8
Parity : None
bits
Use
(reverse)
a
crossed
?Stopbit:1bit
?
Communication code
COMMAND 1
Transmission /
COMMAND 2
DATA
(Hexadecimal)
[Command1][Command2][ ][Set ID][ ][Data][Cr]
a
0~1
Input Select
Aspect Ratio
k
b
0~4
k
c
0~4
*
04. Screen Mute
k
d
0~1
*
05. Volume Mute
k
e
0~1
06. Volume Control
k
f
0~64
03.
Protocol
Receiving
Transmission
k
02.
ASCII code
cable.
Command Reference List
01. Power
:
*
[Command 1]
First command to control PDP set.
:
(jork)
[Command 2]
[Set ID]
:
Second command to control PDP set.
:
You
can
adjust
the set ID to choose
desired monitor ID number in
menu.
See
special
previous page.
Adjustment range is 1 99.
When selecting Set ID '0', every
~
07. Contrast
k
g
0~64
08.
k
h
0~64
09. Colour
k
i
0~64
Set ID is indicated
10. Tint
k
j
0~64
menu
11.
Brightness
k
k
0~64
12. OSD Select
k
l
0~1
13. Remote control lock mode
k
m
0~1
14. PIP/Twin Picture
k
n
0~3
k
o
0~1
Sharpness
15. PIP
Aspect
Split Zoom
(DW)
Ratio
k
p
21~99
k
q
0~3
18. Treble
k
r
0~64
19. Bass
k
s
0~64
20. Balance
k
t
0~64
21. Colour
22. Red
23. Green
24. Blue
25. PIP
Temperature (CSM)
Adjustment
Adjustment
Adjustment
input
Source
k
u
0~2
k
v
0~64
k
w
0~64
k
$
0~64
k
y
0~4
26. SSM Mode
k
x
0~4
27. Abnormal Status
k
z
0~a
28. ISM Method
j
j
j
j
j
p
0~3
q
0~1
29. Low Power
30. Orbiter Time
Setting
Setting
Configure
31. Orbiter Pixel
32. Auto
*
When
setting
the 27
32,
~
a menu
r
1~FE
s
0~9
u
1
[DATA]
display
on
and
as
as
Hexa decimal
To transmit command data.
:
Transmit 'FF' data to read status of
command.
*
[Cr]
Carriage
:
Return
ASCII code '0x0D'
*[]
ASCII code
:
'space (0x20)'
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
based
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
on
time, if the
the data is data write
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
abnormal data from
receiving
non-viable functions
Data
1:
Illegal
2: not
doesn't
decimal
(1~99)on
(0x0~0x63)
transmission/receiving protocol.
on
*
17. PIP Position
16.
connected PDP set is controlled.
or
communication
based
on
errors.
Code
support function
3: Wait
more
time
screen.
Owner's Manual
25
Miscellaneous
01. Power
04. Screen Mute
(Command
Γ To control Power On/Off of the Monitor.
Γ To select
mute on/off.
Transmission
Transmission
2
(Command
:
a)
[k][a][ ][Set ID][ ][Data][Cr]
Data
0
d)
:
[k][d][ ][Set ID][ ][Data][Cr]
Power Off
:
screen
2
1:PowerOn
Data 0
:
Screen mute off
1
:
Screen mute
(Picture on)
(Picture off)
on
Ack
Ack
[a][ ][Set ID][ ][OK][Data][x]
[d][ ][Set ID][ ][OK][Data][x]
Γ To show Power On/Off.
Transmission
05. Volume Mute
(Command
[k][a][ ][Set ID][ ][FF][Cr]
Γ To control volume
mute on/off.
Ack
You
adjust
mute
the MUTE button
using
on
Transmission
In like manner, if other functions transmit '0xFF' data
based on this format, Acknowledgement data feed back
[k][e][ ][Set ID][ ][Data][Cr]
Data
status about each function.
presents
also
e)
:
remote control.
[a][ ][Set ID][ ][OK][Data][x]
*
can
2
0
:
Volume mute
1
:
Volume mute off
(Volume off)
(Volume on)
on
Ack
02.
Select
Input
Γ To select input
You
(Command
source
also select
can
SELECT button
on
an
2
:
[e][ ][Set ID][ ][OK][Data][x]
b)
for the Monitor.
input
using
source
the INPUT
the Monitor's remote control.
on
[k][b][ ][Set ID][ ][Data][Cr]
0
:RGB
3
:
1
:
Component (or AV1)
:AV(orAV2)
4
:DVI
2
(Command
2
:
f)
Γ To adjust volume.
You
Transmission
Data
06. Volume Control
can
also
adjust
volume with the volume buttons
remote control.
Transmission
S-Video
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Ack
Refer to 'Real data
mapping
1'. See page 29.
Ack
[b][ ][Set ID][ ][OK][Data][x]
[f][ ][Set ID][ ][OK][Data][x]
07. Contrast
03.
Ratio
Aspect
Γ To adjust the
(Command
2
:
c) (Main Picture Size)
format. (Main picture format)
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
You
screen
also
can
SCREEN
menu.
Γ To adjust
You
Data
0
:
Wide
1
:
Normal
2
:
Full
contrast.
adjust
contrast in the PICTURE
menu.
Min:0~Max:64
Refer to 'Real data
mapping
1'. See page 29.
Ack
(16:9)
(4:3)
(Zoom)
screen
[g][ ][Set ID][ ][OK][Data][x]
screen
screen
also
g)
:
[k][g][ ][Set ID][ ][Data][Cr]
*
[k][c][ ][Set ID][ ][Data][Cr]
screen
2
Transmission
Data
Transmission
can
(Command
3:Auto
08.
4:14:9
You
[c][ ][Set ID][ ][OK][Data][x]
*
Brightness (Command
Γ To adjust
Ack
Using
the PC
input,
you select either 16:9
aspect ratio.
or
4:3
screen
can
brightness.
adjust brightness
h)
also
in the PICTURE
menu.
[k][h][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
*
Refer to 'Real data
mapping
Ack
[h][ ][Set ID][ ][OK][Data][x]
Plasma Monitor
:
Transmission
Data
26
2
screen
1'. See page 29.
Miscellaneous
09. Colour
You
can
2
(Command
Γ To adjust the
also
14. PIP / Twin
i)
:
2
(DW) (Command
:
n)
Γ To control the PIP (Picture In picture)/Twin picture.
screen
colour.
adjust
colour in the PICTURE
You
menu.
also control the
can
PIP/DW button
Transmission
PIP/TWIN
picture using
the remote control
on
or
the
in the PIP/DW
menu.
[k][i][ ][Set ID][ ][Data][Cr]
Data
Transmission
Min:0~Max:64
*
Refer to 'Real data
mapping
[k][n][ ][Set ID][ ][Data][Cr]
1'. See page 29.
Data 0: PIP off
Ack
1: PIP
[i][ ][Set ID][ ][OK][Data][x]
2: DW1
3: DW2
10. Tint
(Command
Γ To adjust the
You
can
also
2
j) (option)
:
screen
tint.
adjust
tint in the PICTURE
Ack
[n][ ][Set ID][ ][OK][Data][x]
menu.
Transmission
15. PIP
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red:0~Green:64
*
Refer to 'Real data
Ratio
Aspect
(Command
2
:
o)
Γ To select the PIP picture format.
You
mapping
1'. See page 29.
also
can
PIP/DW
Ack
adjust
the
screen
format for PIP in the
menu.
Transmission
[j][ ][Set ID][ ][OK][Data][x]
[k][o][ ][Set ID][ ][Data][Cr]
Data 0: Normal
11.
Sharpness (Command
Γ To adjust the
You
can
also
2
1: Wide
k)
:
sharpness.
adjust sharpness in
(4:3)
(16:9)
screen
screen
Ack
screen
the PICTURE
menu.
[o][ ][Set ID][ ][OK][Data][x]
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
16.
Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See page 29.
Zoom
Split
(Command
Γ To operate split
zoom
2
:
p)
function and select the
split
zoom
section number.
Ack
[k][ ][Set ID][ ][OK][Data][x]
Transmission
12. OSD Select
Data
[k][p][ ][Set ID][ ][Data][Cr]
(Command
2
:
l)
Min: 21
Γ To select OSD (On Screen Display) on/off when
con-
?
trolling remotely.
~
Max:99
Data 21:
ex.
Selection 1 of 2
Refer to 'Real data
mapping
split
zoom.
2'.
Ack
Transmission
[p][ ][Set ID][ ][OK][Data][x]
[k][l][ ][Set ID][ ][Data][Cr]
Data0
:OSDoff
1:OSDon
*
Ack
[l][ ][Set ID][ ][OK][Data][x]
13. Remote control lock mode
Γ
To lock the front
panel
controls
(Command
on
2
:
m)
the monitor and remote
control.
Real data
mapping
21
:
Selection 1 of 2
24
:
Selection 4 of 2
41
:
Selection 1 of 4
42
:
Selection 2 of 4
44
:
Selection 4 of 4
45
:
Selection 5 of 4
91
:
99
:
zoom
Selection 1 of 9
split
split
split
split
split
split
split
Selection 9 of 9
split
zoom
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
Lock off
2
zoom
zoom
zoom
zoom
zoom
zoom
1:Lockon
Ack
[m][ ][Set ID][ ][OK][Data][x]
*
If
you're
not
using
the remote
When main power is
released.
control, use this mode.
on/off, external control lock is
Owner's Manual
27
Miscellaneous
17. PIP Position
(Command
2
22. Red
q)
:
Γ To select sub picture position for PIP.
You
can
also
adjust
the sub
WIN.POSITION button
PIP/DW
picture position using
the remote control
on
or
in the
v)
:
Γ To adjust red in colour temperature.
Transmission
[k][v][ ][Set ID][ ][Data][Cr]
menu.
Transmission
Data
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
Min:0~Max:64
Refer to 'Real data
*
[k][q][ ][Set ID][ ][Data][Cr]
Data
2
Adjustment (Command
mapping
3'. See page 29.
Ack
on screen
[v][ ][Set ID][ ][OK][Data][x]
on screen
on screen
up
on screen
Ack
23. Green
[q][ ][Set ID][ ][OK][Data][x]
Γ To adjust green in colour temperature.
2
Adjustment (Command
:
w)
Transmission
18. Treble
(Command
2
[k][w][ ][Set ID][ ][Data][Cr]
:r)
Data
Γ To adjust treble.
You
can
also
adjust
treble in the SOUND
Min:0~Max:64
Refer to 'Real data
*
menu.
mapping
Transmission
Ack
[k][r][ ][Set ID][ ][Data][Cr]
[w][ ][Set ID][ ][OK][Data][x]
Data
3'. See page 29.
Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See page 29.
Ack
(Command
2
:
also
Min:0~Max:64
*
adjust
$)
[k][$][ ][Set ID][ ][Data][Cr]
s)
Γ To adjust bass.
can
:
Transmission
Data
You
2
Adjustment (Command
Γ To adjust blue in colour temperature.
[r][ ][Set ID][ ][OK][Data][x]
19. Bass
24. Blue
bass in the SOUND
menu.
Transmission
Refer to 'Real data
mapping
3'. See page 29.
Ack
[$][ ][Set ID][ ][OK][Data][x]
[k][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
1'. See page 29.
Ack
25. PIP
Γ
Input
To select
Select
input
ture mode. You
[s][ ][Set ID][ ][OK][Data][x]
(Command
2
:
can
also
adjust
t)
balance in the SOUND
menu.
for sub
also
picture in PIP/Twin picadjust input source for sub
on
remote control.
0
:RGB
3
:
1
:
Component (or AV1)
:AV(orAV2)
4
:DVI
:
Music
2
[k][t][ ][Set ID][ ][Data][Cr]
Refer to 'Real data
S-Video
Ack
Min:0~Max:64
*
y)
:
[k][y][ ][Set ID][ ][Data][Cr]
Data
Transmission
Data
can
2
Transmission
Γ To adjust balance.
You
source
PIP INPUT button
picture using
20. Balance
(Command
[y][ ][Set ID][ ][OK][Data][x]
mapping
1'. See page 29.
Ack
[t][ ][Set ID][ ][OK][Data][x]
26. SSM Mode
21. Colour
Temperature (Command
2
:
u)
can
also
adjust
CSM in the PICTURE
menu.
Transmission
0: Normal
1: Cool
2: Warm
0
:
Flat
3
1
:
Speech
4:User
2
:
Movie
3: User
Ack
28
Plasma Monitor
x)
[k][x][ ][Set ID][ ][Data][Cr]
Ack
[u][ ][Set ID][ ][OK][Data][x]
:
To select sound mode.
Data
[k][u][ ][Set ID][ ][Data][Cr]
Data
2
Transmission
Γ To adjust colour temperature.
You
Γ
(Command
[x][ ][Set ID][ ][OK][Data][x]
Miscellaneous
27. Abnormal State
Γ To recognize
(Command
2
:
30. Orbiter Time
z)
(Command
abnormal state.
an
0: Normal
[j][r][ ][Set ID][ ][Data][Cr]
1: No
Data
2:
3:
4:
(Power on and signal exist)
signal (Power on)
Turn the monitor off by remote control
Turn the monitor off by sleep time function
Turn the monitor off by RS-232C function
Min: 1
?
r)
:
~
Max: FE
Refer to 'Real data
mapping
1'. See page 29.
Ack
5: 5V down
[r][ ][Set ID][ ][OK][Data][x]
6: AC down
7: Turn the monitor off
8: Turn the monitor off
9: Turn the monitor off
a:
2
term.
Transmission
[k][z][ ][Set ID][ ][FF][ ][Cr]
Turn the monitor off
by
by
by
by
Fan Alarm function
off time function
auto off function
31. Orbiter Pixel
AV board detect
(Command
Ack
This function is "read
1
Setting
: j, Command
2
:
s)
Γ To adjust pixel number in orbiter function.
[z][ ][Set ID][ ][OK][Data][x]
*
Setting
: j, Command
Γ To adjust orbiter operation time
Transmission
Data
1
Transmission
only".
[j][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:9
?
28. ISM Method
(Command
1
:
j,
Command 2
Γ To control the ISM method. You
Method in SPECIAL
:
p)
also
can
Refer to 'Real data
mapping
1'. See page 29.
Ack
adjust
ISM
[s][ ][Set ID][ ][OK][Data][x]
menu.
Transmission
32. Auto
[j][p][ ][Set ID][ ][Data][Cr]
Data
0
:
Normal Mode
2
:
Inversion
1
:
Orbiter
3
:
White Wash
Configure
(Command 1 : j,
Command 2
:
u)
Γ To adjust picture position and minimize image shaking
automatically.
Ack
It works
only
in RGB
(PC),
DVI
(PC)
mode.
[p][ ][Set ID][ ][OK][Data][x]
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data
29. Low Power
(Command
1: To set
Ack
1
:
j,
Command 2
:
q)
[u][ ][Set ID][ ][OK][Data][x]
Γ To reduce the power consumption of the monitor. You
can
also
adjust
Low Power in SPECIAL
menu.
Transmission
[j][q][ ][Set ID][ ][Data][ ][Cr]
Data
0
:Off
1
:On
Ack
*
Real data
mapping
1
*
Real data
0
:Step0
A
:Step10(SetID10)
A:-8
F :Step15(SetID15)
10:Step16(SetID16)
2D: -1
mapping
3
0:-10
5:-9
[q][ ][Set ID][ ][OK][Data][x]
32: 0
37: +1
64
:
Step
100
5F: +9
64: +10
Owner's Manual
29
Miscellaneous
IR Code
Code
(NEC
(NEC Format)
How to connect
Γ
Connect your wired remote control to the Remote
Remote Control IR Code
port
on
the Monitor.
(NEC Format)
Γ Output waveform
Single pulse,
modulated with 37.917KHz
at 455KHz
signal
TC
Carrier
frequency
FCAR
1/TC
Duty
T1
=
ratio
=
fOSC/12
=
T1/TC
1/3
=
Γ Configuration of frame
?
1st frame
Lead
Low
High
code
custom code
custom code
Data code
Data code
C0 C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?
Repeat
frame
Repeat
code
Tf
Γ Lead code
9ms
4.5
ms
0.55
Γ Repeat code
ms
9ms
2.25
ms
Γ Bit description
?
Bit "0"
?
0.56
0.56
1.12
Γ Frame interval
:
Bit "1"
ms
2.24
ms
Tf
The waveform is transmitted
Tf
as
long
as a
key
is
depressed.
Tf
Tf=108ms @455KHz
30
Plasma Monitor
ms
ms
Miscellaneous
Code
Function
(Hexa)
Note
00H
UP
(Δ)
R/C Button
01H
DOWN
(Ε)
VOL+ (Γ)
VOL- (Φ)
R/C Button
08H
POWER
R/C Button
C4H
POWER ON
Discrete IR Code
C5H
POWER OFF
Discrete IR
09H
MUTE
R/C Button
10H
Number
11H
Number
12H
Number
13H
Number
14H
Number
15H
Number
16H
Number
17H
Number
18H
Number
19H
Number
0BH
INPUT SELECT
R/C Button
98H
MULTIMEDIA
R/C Button
BFH
COMPONENT
Discrete
C6H
DVI
Discrete
D5H
RGB
Discrete
D6H
TV
Discrete
5AH
AV
Discrete
D8H
S-VIDEO
Discrete
0AH
I/II/*
R/C Button
0EH
SLEEP
R/C Button
43H
MENU
40H
ZOOM
41H
ZOOM
44H
OK(Α)
R/C Button
4DH
PSM
R/C Button
52H
SSM
R/C Button
53H
LIST
R/C Button
20H
TEXT/*
R/C Button
2AH
REVEAL
R/C Button
22H
MODE
R/C Button
24H
MIX
R/C Button
26H
TIME
R/C Button
62H
UPDATE
R/C Button
64H
SIZE
R/C Button
65H
HOLD
R/C Button
70H
INDEX
R/C Button
60H
PIP/DW
R/C Button
61H
PIP INPUT
R/C Button
63H
SWAP
R/C Button
69H
WIN.SIZE
R/C Button
6AH
WIN.POSITION
R/C Button
71H
PR+/*
R/C Button
72H
PR-/*
R/C Button
7BH
SPLIT ZOOM
R/C Button
79H
ARC
R/C Button
76H
ARC
77H
ARC
AFH
ARC
02H
03H
Key
Key
Key
Key
Key
Key
Key
Key
Key
Key
R/C Button
R/C Button
0
R/C Button
1
R/C Button
2
R/C Button
3
R/C Button
4
R/C Button
5
R/C Button
6
R/C Button
7
R/C Button
8
R/C Button
9
R/C Button
(Power On/Off)
(Only Power On)
Code (Only Power Off)
(Input COMPONENT, RGB or
(Input COMPONENT Selection)
(Input DVI Selection)
(Input RGB Selection)
(Input TV Selection)
(Input AV Selection)
(Input S-VIDEO Selection)
DVI
Selection)
R/C Button
+
-
(4:3)
(16:9)
(Zoom)
R/C Button
R/C Button
(4:3/16:9 Mode Selection)
(Only 4:3 mode)
Code (Only 16:9 mode)
Code (Only Zoom mode)
Discrete IR Code
Discrete IR
Discrete IR
Owner's Manual
31
Miscellaneous
Notes
32
Plasma Monitor
Miscellaneous
Notes
Owner's Manual
33
Miscellaneous
Checklist
Checklist
Troubleshooting
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
?
Plug
on.
No sound
another
power cord
Sound muted? Press MUTE button.
?
Check to
?
?
?
Picture appears slowly,
after switching on
see
(Refer
to
p.6)
Install
new
No
to
image
is muted
one
of the
Unusual sound from
inside the monitor
Plasma Monitor
polarities.
during
the
startup process of the moni-
centre, if the picture has not appeared after
to
menu
Activate any function to restore the
still
(Γ)
button.
certain distance between the Monitor and the VCR.
?
a
and press the VOLUME
p.15)
picture
is
on
the
screen
for
?
Check for local interference such
?
Adjust
?
A
brightness
more
as an
than 5
Balance in the Sound
change
in ambient
at the time of
humidity
switching
with the monitor.
off
menu.
or
or on
of the
(Refer
to
picture.
minutes, the
electrical
picture shaking
output from
and the
p.6)
Keep
speakers
34
the
(Refer
Select Colour in the Picture
(If
or
as
Display
installed with the correct
are
?
picture
Horizontal/vertical bars
batteries.
between the Plasma
object
obstruction.
five minutes.
Poor colour
Poor
causing
if the batteries
This is normal
(Refer
or
button.
if there is any
see
Check to
(Γ)
tor. Please contact your service
?
or
in.
?
doesn't work
No
plugged
Press the VOLUME
remote control
The remote control
power cord into the wall outlet where the Monitor 's
?
Picture OK &
No sound
product's
was
appliance
screen
or
gets dark.)
power tool.
p.16)
temperature may result in
an
unusual noise
of the monitor and does not indicate
a
fault
Miscellaneous
Product
Specifications
MODEL
Width
MZ-42PZ44/46/H/B/R/S
MZ-42PZ90/92/H/B/R/S
MZ-42PZ45/47V/B/R/S
MZ-42PZ91/93V/B/R/S
MZ-42PZ45/47M/B/R/S
MZ-42PZ91/93M/B/R/S
(inches
/
mm)
40.7 / 1033
Height (inches
/
mm)
24.5 / 622
Depth (inches
/
mm)
3.2/81
/
75/34
Weight (pounds
Power
kg)
AC100-240V, 50/60Hz
requirement
Resolution
852
Colour
32
(Dot)
MODEL
~
104°F
(0
40°C)
~
Less than 80%
Operating Humidity Range
MZ-50PZ44/46/H/B/R/S
MZ-50PZ90/92/H/B/R/S
MZ-50PZ45/47V/B/R/S
MZ-50PZ91/93V/B/R/S
MZ-50PZ45/47M/B/R/S
MZ-50PZ91/93M/B/R/S
(inches
/
mm)
48.2 / 1223
Height (inches
/
mm)
28.9 / 734
Depth (inches
/
mm)
4.1 / 105
/
95.2 / 45
Width
Weight (pounds
Power
kg)
AC100-240V, 50/60Hz
requirement
Resolution
1366
32
Operating Temperature Range
shown above may be
768
(Dot)
~
104°F
(0
40°C)
~
Less than 80%
Operating Humidity Range
specifications
x
16,770,000 (256 steps of each R, G and B)
Colour
The
480
16,770,000 (256 steps of each R, G and B)
Operating Temperature Range
?
x
changed
without notice for
quality improvement.
Owner's Manual
35
Download PDF

advertising