LG | MZ-50PZ43 | LG MZ-50PZ43 Owner’s Manual

PLASMA MONITOR
OWNER'S MANUAL
MT-50PZ40/H/A/B/K/R/S
MT-50PZ41/H/A/B/K/R/S
MT-50PZ43/H/A/B/K/R/S
MZ-50PZ42/H/A/B/K/R/S
MZ-50PZ43/H/A/B/K/R/S
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
P/NO
:
3828VA0351A
cover
require
(RF02CA,
and quote this infor-
service.
067Y TX,
373-026H)
f
LG Plasma Monitor
What is
If
is
voltage
Plasma
a
inputted
Display
to gas in
?
glass panels,
ultraviolet rays is
moment, light is emitted. A Plasma Display is
160°
-
Wide
A Plasma
angle range
Display provides
a
outputted and fused with a fluorescent
generation flat Display using this phenomenon.
next
substance. At this
of vision
than 160°
more
angle
range of vision
so
that you
can
get
a
without distortion from
picture
any direction.
Easy
installation
A Plasma
Display is much lighter
place.
and smaller than other
same
class
products
so
that you
can
install the Plasma
Display
at the desired
Big
The
screen
screen
of
a
Plasma
Display
Multimedia Plasma
A Plasma
and
Display
can
is 50"
so
that you
can
get
vivid
experience
as
if you
are
in
a
theater.
Display
be connected with
a
computer
so
that you
can use
it
as a screen
for
conference, game, internet
so on.
The
explanation
The PDP which is the
about coloured dots may be present
display
device of this
product
is
composed
on
PDP
screen
of 0.9 to 2.2 million cells and
in the manufacture of the PDP. Several coloured dots visible
on
the
a
few cell defects
acceptable, in line
PDP manufacturers and would not mean that the PDP is faulty. We hope you will understand that the product
responds to this standard is regarded as acceptable. It means that it could not be changed or refunded.
We promise that we'll do our best to develop our technology to minimize the cell defects.
occur
screen
would be
can
with other
which
cor-
WARNING
This is Class A
case
the
user
product. In a domestic environment this product
required to take adequate measures.
may
cause
radio interference in which
may be
WARNING
MT-50PZ40 / MZ-50PZ42 series
cause
:
This is Class B
radio interference in which
case
the
user
product.
may be
In
a
domestic environment this
required
to take
adequate
product
may
measures.
WARNING
TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
2
Contents
SafetyInstructions................................................4
Equipment
Connections and
Setup
ControlsoftheMonitor.............................................6
WatchingExternalEquipments.......................................7
DisplayableMonitorSpecification....................................10
ControlsoftheRemotecontrol......................................11
InstallationoftheSimplemonitorstand................................13
Monitorinstallation...............................................13
Basic Features Setup and Operation
TurningontheMonitor............................................14
Menulanguagesetup.............................................14
VIDEO Menu
PSM(PictureStatusMemory).......................................15
AdjustingAutoColourControl.......................................15
ManualColourTemperatureControl..................................15
ManualpictureControl............................................15
AUDIO Menu
SSM(SoundStatusMemory)........................................16
AVL(AutoVolumeLeveler).........................................16
AdjustingSound.................................................16
TIME Menu
SettingtheClock................................................17
SettingtheOn/OffTimer...........................................17
AutoOff.......................................................17
SleepTimer....................................................17
SPECIAL Menu
Childlock......................................................18
Orbiter........................................................18
WhiteWash....................................................18
SCREEN Menu
Autoadjustment.................................................19
SettingPictureFormat............................................19
SplitZoom.....................................................19
ScreenPosition.................................................20
ManualConfigure................................................20
ScreenAdjustments..............................................20
Initializing(Resettofactoryvalue)....................................20
PIP Function
WatchingPIP...................................................21
PIPAspectRatio.................................................21
MovingthePIP..................................................21
MainPictureSizeAdjustment.......................................21
PIPSize.......................................................21
SwappingthePIP................................................21
SelectingasourceinputsignalforthePIP.............................21
MainPicturePositionAdjustment....................................21
TWIN Picture
MainPictureSizeAdjustment.......................................22
SubPictureSizeAdjustment........................................22
SelectingasourcefortheTwinPicture................................22
SwappingtheTwinPicture.........................................22
ExternalControlDeviceSetup.....................................23
Others
Troubleshootingchecklist..........................................30
Productspecifications.............................................31
After
reading
this
manu-
al, keep it in the place
where the
always
user can
contact
easily.
3
Instructions
Safety
Use the Monitor at the
-
lower than the altitude of 6562 feet
place
(2000m)
to
get the best quality of picture
and sound.
W
WARNING
Do not
place the Monitor in direct sunlight or near heat
such as heat registers, stove and so on.
sources
This may
-
Do not
use
room or
fire.
the Monitor in
any
This may
-
cause a
place
cause a
Do not
-
damp place such as a bathlikely to get wet.
where it is
fire
could
or
give
an
electric shock.
In
cable
antenna
building
to
and
damaged
damaged
of smoke
or
the Monitor
could
give
an
electric
strange smell from the Monitor,
,unplug it from the
your dealer
or
This may
cleaning.
or
wall outlet and contact
service center.
cause a
fire
or
could
give
an
electric shock.
outside
Do
prevent rain from flowing in.
This may cause water
give an electric shock.
-
inside
between
case
water the Monitor while
cause
switch it off
-
Bend
use
This may
shock.
inside the Monitor and could
not
attempt
to
Contact your dealer
-
This may
shock.
cause
service
or
the
Monitor
yourself.
service center.
damaged
the Monitor
or
could
give
an
electric
Earth wire should be connected.
If the earth wire is not connected, there is possible
by the current leakage.
-
a
danger
of
electric shock caused
-
If
er
grounding
should be
methods
are
employed
not
During
lightning thunder, unplug the Monitor
a
the wall outlet and don't touch
possible, a separate circuit breakby a qualified electrician.
and installed
-
This may
shock.
cause
damaged
an
the Monitor
from
antenna cable.
or
could
give
an
electric
Power
supplier
Short-circuit
breaker
-
Do not connect
ground
to
telephone wires, lightning
rods
or
gas
pipe.
Do not
placing anything containing liquid
on
top of
the Monitor.
-
This may
cause a
Do not insert any
-
This may
Do not
-
cause a
fire
or
could
cause
an
or
could
serious
injury
give
on
to
a
an
4
This set is
vent.
electric shock.
the Monitor.
child
WARNING in U.K.
*
electric shock.
object into the exhaust
fire
place heavy objects
This may
give
or
adult.
only
supplied with a BS 1363 approved 13 amp mains plug, fused at 13 amp. When replacing the fuse
always use a 13 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To
obtain a replacement fuse cover contact your dealer or "LG Electronics U.K. Ltd." If the type of plug supplied is not
suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
A mains plug removed from the mains lead of this set must be destroyed. A mains plug with bared wires is
hazardous if inserted in a mains socket. Do not connect either wire to the earth pin, marked with the letter E or
with the earth symbol
or coloured green or green and yellow. If any other plug is fitted, use a 13 amp fuse,
either in the plug, or at the distribution board.
The wires in this mains lead are coloured in accordance with the following codes: BLUE: NEUTRAL, BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your plug, proceed as follows: The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured brown must be connected
to the terminal which is marked with the letter L or coloured red.
*
Safety
instructions have two kinds of
WARNING
NOTES
information, and each meaning of it is
as
below.
The violation of this instruction may
cause
serious
The violation of this instruction may
cause
light injuries
injuries
and
even
damage
or
death.
of the
product.
Take
care
of
under
danger that may happen
specific condition.
NOTE
This
plasma display is designed
zontally (wide viewing).
Never touch the power
-
This may
cause an
plug with
to be mounted hori-
-
a
This may
Do not
wet hand.
aged
electric shock.
like
objects
a
plug
the
or
heater.
cause a
fire
or an
electric shock.
when the power cord or the plug is damconnecting part of the power outlet is
loose.
Disconnect from the mains and
tions before
Do not
as a
-
all
connec-
-
This may
cause a
fire
or an
electric shock.
moving.
place the Monitor
bookcase
Ventilation
remove
in
a
built-in installation such
rack.
or
Dispose of used batteries carefully
eating them.
to
protect
a
child
from
-
In
case
that it eats them, take it to
see a
doctor
immediately.
required.
When
moving the Monitor assembled with speakers
holding the speakers.
do
not carry
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
injury
to
a
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
-
This may
shock.
cause
damaged
the Monitor
Contact the service center
When
to
-
installing the Monitor on
place the edge of its stand.
table,
a
be careful not
injury
to
could
a
year to clean the
give
an
electric
internal part of the Monitor.
-
This may cause the Monitor to fall, causing serious
child or adult, and serious damage to the Monitor.
once
or
Accumulated dust
can cause
mechanical failure.
a
The distance between eyes and the screen should be
7 times as long as diagonal length of the
about 5
~
Do not
place
an
outside antenna in the
head power lines
or
vicinity of overother electric light or power cir-
screen.
-
If not, eyes will strain.
cuits.
-
This may
cause an
Unplug the Monitor
electric shock.
from the wall outlet when it is left
unattended and unused for
-
Accumulated dust may
deterioration or electric
Only
-
use
the
This make
long periods
cause a
fire
or an
of time.
electric shock from
leakage.
specified batteries.
cause
damaged
the Monitor
or
could
give
an
electric
shock.
There should be
antenna
touching
-
an
outside
power lines to keep the former from
the latter even when the antenna falls.
This may
Do not
-
enough distance between
and
cause an
pull the
This may
electric shock.
cord but the
cause a
plug
when
unplugging.
fire.
Ensure the power cord doesn't trail
across
any hot
5
Controls of the Monitor
<Front Panel Controls>
VOL
Power
ON/OFF
INPUTSELECT
INPUT SELECT button
standby indicator
red in standby
Main power button
MENU button
Illuminates
mode.
MENU
Illuminates
green
when the Monitor is turned
VOLUME
(Φ,Γ) buttons
Remote control
sensor
Δ,Ε buttons
on
<Back Panel>
Y
R AUDIO L (MONO)
()R ()
EXTERNAL SPEAKER (8Ω)
AUDIO
INPUT
AC INPUT
VIDEO
INPUT
S-VIDEO
PB
PR
COMPONENT(480i/480p)
(DVD INPUT)
R AUDIO L
()L ()
AUDIO
INPUT
RGB1 OUTPUT
(PC OUTPUT)
AUDIO
INPUT
RGB1 INPUT
(PC INPUT)
RGB2 INPUT
RGB INPUT)
(DIGITAL
RS-232C INPUT
(CONTROL/SERVICE)
EXTERNAL SPEAKER (8Ω)
AUDIO INPUT
VIDEO
INPUT
RS-232C
COMPONENT
INPUT
RGB1 INPUT
(DVD INPUT)
AUDIO INPUT
Connection to AV
Note
6
:
RGB2 INPUT
AUDIO INPUT
S-VIDEO
All cables shown
are
except : A D-sub
15
not
provided
(PC INPUT)
Connection to PC
equipment
pin
(DIGITAL
RGB INPUT)
with the Monitor,
cable and DVI cable is
supplied
to connect the Monitor to
a
PC.
INPUT
External
Watching
Equipments
<Back Panel>
RCA
Type
()
AUDIO
()
1
Scart
()
Y
(MONO)
2
PB
PR
AUDIO
3
4
()
()
()
()
5
Type
()
3
1.
EXTERNAL SPEAKER
(8
ohm
output)
optionally available speaker.
information, refer to 'Speaker & Speaker
4.
Connect this terminal to the
*For further
stand' manual.
2.
POWER INPUT SOCKET
This Monitor
is
as
indicated
as
OUTPUT(PC OUTPUT)/AUDIO IN SOCKETS
watch the RGB1 signal in other monitor by connecting RGB1 OUTPUT(PC OUTPUT) to other monitor's
PC input jack.
Note : When you watch after connecting with other moncan
itor,
on an
AC mains
inside back
cover
supply,
the
voltage
a.
of this manual. Never
When you select RGB1 or RGB2 for main picture, you
watch AV1, AV2 or S-Video for sub picture.
can
b. When you select AV1, AV2 or S-Video for main
ture, You can watch main picture's viewing.
pic-
INPUT SOCKETS
RGB1 INPUT(PC INPUT)/RGB2 INPUT(DIGITAL
INPUT) IN SOCKETS
RGB
EURO SCART SOCKET
Connect the monitor
apply
3.
operates
RGB1
You
DC power to the Monitor.
VIDEO/S-VIDEO/COMPONENT(DVD INPUT)/AUDIO
output socket of the PERSONAL
COMPUTER to this socket.
Note
:
equipped
The
on
interface
board(AP-50EA40/41)
is
not
MT/MZ-50PZ42/43 series models. Contact
your dealer for
buying
this
optional item.
5.
RS-232C
INPUT(CONTROL/SERVICE)
Connect it to the RS-232C socket
on
SOCKET
the PC.
7
VCR (When the Interface board is installed.)
Watching
The interface
board(AP-50EA40/41)
is not
When
connecting the Plasma Monitor with
Audio(L) white, Audio(R) -red).
Connect the VIDEO INPUT socket(yellow)
equipped
external
on
MT/MZ-50PZ42/43 series models.
equipments,
match the colours of
connecting ports (Video
-
yellow,
-
with the BNC-RCA adapter to the VIDEO INPUT socket of the set.
If you have a mono VCR, connect the audio cable from the VCR to the AUDIO(L/MONO) input of the Plasma Monitor.
If you connect an S-VIDEO VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input.
Or, connect the Euro scart socket of the VCR to the Euro scart socket of the set.
Avoid having a fixed image remain on the screen for a long period of time. Typically a frozen still
4:3 picture format or if a CH label is present; the fixed image may remain visible on the screen.
Use the orbiter function to avoid having a fixed image. (Refer to p.18)
1. Press INPUT SELECT button on the remote control and select Video or (AV1 or AV2).
(When connecting with S-Video, select the S-Video)
2. Insert a video tape into the VCR and press the PLAY button on the VCR. (See VCR owner's
Watching
board(AP-50EA40/41)
subscribing
to
a
is not
equipped
cable TV service from
This monitor cannot
ming.
from
a
VCR,
manual)
Cable TV (When the Interface board is installed.)
The interface
After
picture
display
TV
a
local
programming
on
MT/MZ-50PZ42/43 series models.
and
provider
without
a
installing
can watch cable TV programcable TV converter box connected to the
converter, you
a
TV tuner device
or
monitor.
1. Press INPUT SELECT button on the remote control and select Video
2. Tune to cable service provided channels using the cable box.
Watching
Or,
(AV1
or
AV2).
external AV
The interface
When
or
source (When the Interface board is installed.)
board(AP-50EA40/41) is not equipped on MT/MZ-50PZ42/43
connecting
the Plasma Monitor with external
equipments,
series models.
match the colours of
connect the Euro scart socket of the VCR to the Euro scart socket of the set.
connecting ports.
1. Press INPUT SELECT button on the remote control of the monitor to select Video or (AV1
2. Operate the corresponding external equipment. (See external equipment operating guide.)
DVD (When the Interface board is installed.)
The interface board(AP-50EA40/41) is not equipped on MT/MZ50PZ42/43 series models.
Watching
?
INPUT)
Or,
and audio
inputs
inputs
to
Y, PB, PR of COMPONENT (DVD
AV2).
Component Input ports
You can get better picture quality if you connect DVD player with component input ports
as
How to connect
Connect DVD video
or
below.
Component ports
of the
Monitor
to Audio sockets of AUDIO INPUT.
connect the Euro scart socket of the VCR to the Euro scart socket
of the set.
Video
How to
select
8
output ports
of DVD
use
1. Press INPUT SELECT button
2.
YPBPR
on
the remote control of the monitor to
Component or (AV1 or AV2).
Try this after turning on the DVD player.
(Refer to the DVD player's manual for operating instructions.)
player
Y
Y
Y
Y
Pb
B-Y
Cb
PB
Pr
R-Y
Cr
PR
Connecting
-
-
-
PC
To
enjoy vivid picture and sound, connect a PC to the Monitor.
Avoid keeping a fixed image on the monitor's screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible.
Connect PC to the RGB1 INPUT(PC INPUT) or RGB2 INPUT(DIGITAL RGB INPUT) ports of the Monitor after changing
the resolution of PC.
-
There
noise
resolution, vertical pattern,
according
to
some
or
change
menu
or
-
be
the PC mode into other resolution
might
until the
a
picture
is clean. If the refresh rate of the PC
consult it to the manufacturer of the PC
graphic
graphic
card
or brightness in PC mode. Then change
adjust the brightness and contrast on the
not be changed, change the PC graphic card
contrast
the refresh rate into other rate
can
or
card.
Synchronization input form; Separate
to Connect a PC to your Monitor
If the resolution of PC is over UXGA, there will be no
Setup Instructions
-
-
-
-
-
-
-
-
-
picture on the Monitor.
providing the best picture quality.
Connect the signal cable from the monitor output port of the PC to the RGB1 INPUT(PC INPUT) port of the Monitor or the
signal cable from the DVI output port of the PC to the RGB2 INPUT(DIGITAL RGB INPUT) port on the Monitor.
Connect the audio cable from the PC to the Audio input on the Monitor. (Audio cables are not included with the Monitor).
If using a sound card, adjust PC sound as required.
This monitor apply a VESA Plug and Play Solution. The monitor provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically to use this monitor.
DDC protocol is preset for RGB1 (Analog RGB), RGB2 (DVI, Digital RGB) mode.
If required, adjust the monitor settings for Plug and Play functionally.
If graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of both RGB1 and
RGB2 to display the PC on the monitor.
If graphic card on the PC does output analog and digital RGB simultaneously, set the monitor to either RGB1 or RGB2;
(the other mode is set to Plug and Play automatically by the monitor.)
We recommend 1024x768 60Hz
as
PC Setup
1. Turn on the PC and
2. Turn
on
the
apply power to
display by pressing the
3. Use the INPUT SELECT button
4. Set the resolution
on
output of the PC
?
For further information
?
To avoid
?
To avoid
the PC mode
the Monitor.
POWER button
on
the Monitor's remote control.
the remote control to select the RGB1
to SXGA
or
under
(1280
x
or
RGB2
input
source.
1024, 75Hz).
regarding cable TV service, contact your local cable TV service provider(s).
picture noise (interference), leave an adequate distance between the VCR and monitor.
burning an image on the Monitor screen, don't have a still picture on the screen for a long period
time.
9
Monitor
Displayable
RGB1 mode
<
Resolution
Specification
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
DDC
Resolution
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
53.674
85.06
56.000
90.00
64.016
100.00
DDC
31.468
70.09
37.861
85.08
31.469
70.08
37.927
85.03
49.725
74.55
o
31.469
59.94
o
48.363
60.00
o
35.000
66.66
o
56.476
70.06
o
37.861
72.80
o
60.023
75.02
o
37.500
75.00
o
68.677
84.99
o
43.269
85.00
o
54.348
60.05
o
45.913
90.03
63.995
70.01
o
53.011
100.04
67.500
75.00
o
64.062
120.00
77.487
85.05
o
35.156
56.25
o
75.000
75.00
o
37.879
60.31
o
63.981
60.02
o
46.875
75.00
o
79.976
75.02
o
o
640x350
800x600
o
720x400
832x624
1024x768
640x480
1152x864
800x600
1280x960
1280x1024
(Synchronization input
RGB2 mode
<
Resolution
form
:
separate)
>
Horizontal
Vertical
Frequency(KHz) Frequency(Hz)
31.468
70.09
37.861
85.08
DDC
Resolution
832x624
Horizontal
Vertical
Frequency(KHz)
Frequency(Hz)
DDC
49.725
74.55
o
48.363
60.00
o
56.476
70.06
o
60.023
75.02
o
640x350
31.469
70.08
37.927
85.03
31.469
59.94
o
68.677
84.99
o
35.000
66.66
o
54.348
60.05
o
37.861
72.80
o
63.995
70.01
o
37.500
75.00
o
67.500
75.00
o
43.269
85.00
o
77.487
85.05
o
35.156
56.25
o
68.681
75.06
o
37.879
60.31
o
60.000
60.00
o
48.077
72.18
o
75.000
75.00
o
46.875
75.00
o
63.981
60.02
o
53.674
85.06
o
o
1024x768
720x400
640x480
1152x864
800x600
(Synchronization input
?
10
form
DOS mode may not work
:
1152x870
1280x960
1280x1024
separate)
depending
on
video card if
using
a
DVI-I cable.
Controls of the remote control
-
-
When
using the remote control aim it at the remote control sensor of the Monitor.
maybe defect in consecutive operation of remote control in specified brightness according
There's
to this monitor fea-
ture.
POWER
1.
switches the set
from
on
standby
off to
or
standby.
SLEEP
2.
sets the
PSM
3.
timer.
sleep
(Picture Status Memory)
preferred picture setting.
recalls your
POWER
1
SLEEP
ARC
(Aspect Ratio Control)
changes the picture format.
4.
INPUT SELECT
13
2
PSM
SSM
3
14
ARC
PIP
5.
PIP ARC
switches the sub
15
4
PIP
TWIN PICTURE
5
16
SWAP
on or
off.
SWAP
6.
alternates between main and sub
SUB INPUT
6
picture
17
MENU
MUTE
7
18
selects
8.
OK
VOL
picture.
MENU Button
7.
a menu.
Δ/Ε
selects
VOL
8
Φ
/ Γ
item.
a menu
(Volume Down/Up)
the volume.
adjusts
adjusts
menu
settings.
OK
the current mode.
displays
1
2
3
9.
4
5
6
10. VCR BUTTONS
7
8
9
9
NUMBER BUTTONS
control
LG video cassette recorder.
a
11. WIN. SIZE
0
the sub
adjusts
size.
picture
12. ZOOM-/ZOOM+
10
POWER
STOP
P/STILL
REW
PLAY
FF
13. INPUT SELECT BUTTON
selects
14. SSM
REC
WIN.SIZE
WIN.POSITION SPLIT ZOOM
11
12
ZOOM
-
ZOOM
+
or
PC monitor mode.
(Sound Status Memory)
preferred sound setting.
recalls your
19
20
TV, AV
15. PIP ARC
changes
the
picture
format of PIP.
16. TWIN PICTURE
17. SUB INPUT
selects the
input
mode for the sub
picture.
18. MUTE Button
switches the sound
on or
off.
19. SPLIT ZOOM
enlarge
the
screen
with
regular
ration.
20. WIN.POSITION
moves
Installing
the sub
picture
to Δ / Ε
or Φ
/ Γ direction.
Batteries
?
Open
the
battery compartment
insert the batteries with correct
?
Apply
new
the back side and
polarity.
two 1.5V alkaline batteries of AAA
used batteries with
?
cover on
type. Don't mix the
batteries.
Install the batteries with the correct
polarities.
11
Accessories
POWER
SLEEP
INPUT SELECT
PSM
SSM
ARC
PIPARC
PIP
TWINPICTURE
SWAP
SUB INPUT
MENU
MUTE
OK
VOL
1
2
4
5
7
8
VOL
3
6
9
0
POWER
REW
STOP
P/STILL
PLAY
FF
LG TV
1.5V
REC
WN.SIZE
ZOOM
WIN.POSITION SPLITZOOM
-
1.5V
ZOOM+
ASmark
Owner's Manual
D-sub 15
Optional
-
pin
Remote control handset
cable
DVI cable
BNC-RCA
Alkaline batteries
Power cord
Phone scart cable
Optional
extras
can
be
changed
Contract your dealer for
buying
Tilt wall
or
modified for
quality improvement
without any notification
new
these items.
mounting
Desktop
12
(Optional)
Extras
added.
-
adapter (optional)
bracket
stand
Wall
mounting
bracket
Ceiling mounting
bracket
optional
extras
can
be
Optional
-
Extras
Optional
extras
can
be
changed
or
modified for
quality improvement
without any notification
new
optional
extras
can
be
added.
-
Contract your dealer for
buying
these items.
Speakers
Desktop Speaker
Video cables
stand
PC audio cables
Monitor Installation
?
The Monitor
?
Install this monitor
To install
a.
as
can
wall
be installed in various ways such as wall mounting type, desktop
only in a location where adequate ventilation is available.
To install
mounting type
Wall mount minimum allowable clearances for ade-
quate ventilation
as
type,
etc..
desktop type
b. Pedestal mount minimum allowable clearances for
adequate
ventilation
10cm
10cm
3cm
3cm
10cm
10cm
10cm
10cm
10cm
6cm
13
Turning
When
-
Turning
1.
2.
using the
on
remote
the Monitor
Connect power cord
Press the
the Monitor
on
control,
just
aim it at its
after installation
ON/OFF button
on
on
the Monitor. At this moment, the Monitor is switched to
the Monitor
then the Monitor will be switched
1.
Press the
Press the
the
ON/OFF button
POWER,
The
is still
ON/OFF button
the Monitor to turn
on
the Monitor
on
the level of sound and
volume(Φ)
be
displayed
on
the
screen
in desired
language.
First select your
2..
Press the Γ button and then Δ / Ε button to select
3.
Press the Γ button and then Δ / Ε button to select your desired language.
From this point on, the on-screen display will be presented in the language of
your choice.
Press the MENU button.
on
the Monitor
button decreases the level of sound.
Press the MENU button and then Δ / Ε button to select the SPECIAL
14
on
the Monitor
on
the Monitor.
language setup
menu can
mode. Press the
the remote control and
connected)
1.
4.
standby
on
the Monitor and then press the INPUT SELECT button
INPUT SELECT button on the remote control to turn on the Monitor.
Adjusting volume level
Volume(Γ) button increases
Menu
-
on
POWER, INPUT SELECT button
on.
(power cord
ON/OFF button
press the
If the Monitor is turned off with the remote control and also the ON/OFF button
?
?
the Monitor
or
If the Monitor is turned off with the
?
2.
on
the Monitor.
correctly.
INPUT SELECT button
Turning
sensor on
menu.
Language.
language.
or
press
VIDEO Menu
PSM
-
1.
(Picture Status Memory)
This function
adjusts
the PDP to the best
Press the PSM button to select the
Each press PSM button
?
changes
picture
the
You
?
The
appearance
screen
display
setup.
shown below.
as
User
also select Dynamic, Mild or User in the VIDEO menu.
picture Dynamic and Mild are programmed for good picture reproduction
cannot be changed.
can
Adjusting
-
appearance.
Mild
Dynamic
?
picture
at the
and
factory
Auto Colour Control
To initial values
(reset
to default
settings),
select the 'Normal'.
1.
Press the MENU button and then Δ / Ε button to select the VIDEO
2.
Press the
menu.
VIDEO
PSM
CSM
Γ
button and then Δ / Ε button to select CSM.
Color
TIME
3.
Press the
Δ
/ Ε button to select the desired colour
temperature.
SPECIAL
4.
Γ
AUDIO
Press the MENU button.
100
Brightness
60
colour
50
Sharpness
50
Tint
Normal
Cool
Temp.
Contrast
Warm
User
0
SCREEN
TWIN
MENU
?
Each press of Δ / Ε button
changes
Normal
Manual Colour
-
You
can
the
screen
display
Cool
as
Prev.
shown below.
Warm
User
Temperature Control(User option)
change red,
green and blue to
adjust
colour
temperature you prefer.
1.
Press the MENU button and then Δ / Ε button to select the VIDEO
2.
Press the Γ button and then Δ / Ε button to select the Color
menu.
VIDEO
PSM
CSM
Temp.
AUDIO
.
TIME
3.
Press the Γ button and then Δ /
Ε
button to select colour
temperature items.
SPECIAL
4.
Press the Φ /
5.
Press the MENU button.
Γ
button to make
appropriate adjustments.
Color
The
Manual
-
-
You
PIP
adjustment
picture
100
Brightness
60
Colour
50
Sharpness
50
Tint
Red
0
Green
0
Blue
0
0
SCREEN
TWIN
MENU
?
Γ
Temp.
Contrast
Prev.
range of Red, Green and Blue is -10~+10.
control
(User option)
can adjust picture contrast, brightness, colour, sharpness
settings are not adjustable.
and tint to the levels you
1.
Press the MENU button and then Δ / Ε button to select the VIDEO
2.
Press the Γ button and then Δ / Ε button to select the desired
3.
Press the Γ button and then Φ / Γ button to make
menu.
prefer.
VIDEO
PSM
picture
item.
AUDIO
Color
TIME
appropriate adjustments.
SPECIAL
4.
CSM
Press the MENU button.
SCREEN
Temp.
Contrast
70Γ
Brightness
60
Colour
50
Sharpness
50
Tint
0
TWIN
MENU
Prev.
15
AUDIO Menu
SSM
-
1.
(Sound Status Memory)
This function lets you enjoy the best sound without any special adjustment because the Monitor automatically selects the appropriate sound option based on the program content.
Press the SSM button to select the
Flat
?
AVL
-
1.
2.
You
can
(Auto
picture
Movie
Speech
also select
Volume
Flat, Speech, Movie, Music
an
equal
volume
Press the MENU button and than Δ /
Press the
or
Music
User in the AUDIO
User
menu.
Leveler)
This feature maintains
Γ
setup.
appearance
button and then Δ
/ Ε
level;
Ε
even
if you
change
channels.
button to select the AUDIO
menu.
VIDEO
SSM
AUDIO
button to select AVL.
TIME
3.
Press the Γ button and then Δ /
4.
Press the MENU button.
Ε
button to select On
or
AVL
Γ
Treble
50
Bass
50
Balance
Off.
0
SPECIAL
SCREEN
TWIN
MENU
Adjusting
1.
Sound
(Manual Setting)
Press the MENU button and then Δ /
Ε
button to select the AUDIO
menu.
VIDEO
SSM
2.
Press the Γ button and then Δ / Ε button to select the desired sound item.
3.
Press the Γ button and then Φ / Γ button to make
AUDIO
TIME
4.
Prev.
appropriate adjustments.
AVL
Treble
50Γ
Bass
50
Balance
0
SPECIAL
Press the MENU button.
SCREEN
TWIN
16
MENU
Prev.
On
Off
TIME Menu
Setting
the Clock
If current time
-
button
on
the
setting
is erased
by
a
power
failure, if TV is unplugged
Press the MENU button and then Δ / Ε button to select the TIME
1.
or
if the monitor is turned off with the
2.
Press the Γ button and then Δ / Ε button to select Clock.
3.
Press the Γ button and then Δ / Ε button to
menu.
VIDEO
AUDIO
4.
Press the Γ button and then Δ / Ε button to
5.
Press the MENU button.
operates only if
The monitor must be in
-
the hour.
adjust
the minute.
current time has been
standby
--
:
--
Auto. Off
SPECIAL
SCREEN
MENU
Prev.
they
already
are
set.
set to the
same
time.
mode for the On timer to work.
Press the MENU button and then
1.
adjust
TWIN
Off-timer function overrides on-timer function if
-
Γ
Off Timer
the On/Off Timer
Timer function
-
Clock
On Timer
TIME
Setting
ON/OFF
reset the clock.
monitor,
Δ
/ Ε button to select the TIME
menu.
VIDEO
Clock
Press the Γ button and then Δ / Ε button to select Off Timer or On Timer.
2.
Off Timer
TIME
Auto. Off
On Timer
Press the Γ button and then Δ / Ε button to select On.
3.
AUDIO
Γ
Off
On
12
:
00
SPECIAL
Press the Γ button and then
4.
Δ
/ Ε button to
5.
Press the Γ button and then Δ / Ε button to
6.
Only
7.
Press the MENU button.
adjust
the hour.
adjust
the minute.
Vol.
30
SCREEN
TWIN
On Timer function; Press the Γ button and then Δ / Ε button to
volume level.
MENU
Prev.
adjust
To cancel Off/On Timer function
-
Press the Δ / Ε button to select Off in
step
3.
Auto Off
If there is
-
no
input signal,
the monitor turn off
automatically
after 10 minutes.
1.
Press the MENU button and then Δ / Ε button to select the TIME
2.
Press the Γ button and then Δ /
menu.
VIDEO
Clock
3.
Press the
Γ
button and then Δ /
Ε
Ε
button to select Auto. Off.
AUDIO
Off Timer
TIME
Auto. Off
On Timer
button to select On or Off.
Γ
Off
On
SPECIAL
4.
Press the MENU button.
SCREEN
TWIN
Sleep
timer turns the monitor off at the
preset time.
Press the SLEEP button to select the number of minutes. The
-
Prev.
Timer
Sleep
-
MENU
followed
zz
Min will appear on the screen,
to count down from the number of min-
display
by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins
---
utes selected.
When the
-
sleep
a.
To check the
b.
To cancel the
c.
If you turn
time you want is
displayed
on
the screen, press the OK button.
remaining sleep time, press the SLEEP or OK button once.
sleep time, repeatedly press the SLEEP button until the display
the monitor off after setting the sleep timer, the setting will be erased.
zz
---
Min appears.
17
SPECIAL Menu
Child lock
-
The monitor
can
be set up
that it
so
can
be used with the remote control.
only
1.
Press the MENU button and then
2.
Press the Γ button and then Δ / Ε button to select Child lock.
/ Ε button to select the SPECIAL
Δ
3.
Press the Γ button and then Δ / Ε button to select On
4.
Press the MENU button.
or
menu.
VIDEO
Language
AUDIO
Child lock
Γ
Orbiter
TIME
Off.
On
Off
White Wash
Set ID
SPECIAL
SCREEN
TWIN
-
-
This monitor
programmed
In Child lock
on
while
it
was
last set to event if you turn the monitor off.
on the monitor or POWER and
the remote control.
With the Child lock
pressed
option
Prev.
'On', if the monitor is turned off, press the INPUT SELECT button
INPUT SELECT
-
to remember which
MENU
'
On, the display
viewing
Child lock' appears
on
the
screen
if any button
on
the front
panel
is
the monitor.
Orbiter
-
Avoid
keeping
a
fixed
remain
image
PC/video game set displayed
when you change the image.
-
To avoid
:Right
-
1.
→
a
permanent image
Right
→
Downside
This is the function to
on
on
→
prolong
on
the
the Monitor's
screen
for
screen
the screen, the screen will
→ Left → Left →
Downside
hour till
Press the MENU button and then
Δ
having
a
for
long period
a
prolonged periods
fixed
image
move
of time. A frozen still
will result in
an
picture from
image ghost remaining even
a
every 2 minutes.
Upside
→
Upside
but it doesn't avoid
/ Ε button to select the SPECIAL
menu.
permanent image perfectly.
VIDEO
Language
2.
Press the Γ button and then Δ / Ε button to select Orbiter.
3.
Press the Γ button and then Δ / Ε button to select On
or
AUDIO
Child lock
Orbiter
TIME
Off.
Γ
On
Off
White Wash
Set ID
SPECIAL
4.
Press the MENU button.
SCREEN
TWIN
MENU
Prev.
White Wash
-
-
This is the function to
remove
permanent image
Set White Wash 'On' until fixed
on
the
screen.
image disappears.
1.
Press the MENU button and then Δ / Ε button to select the SPECIAL
2.
Press the
3.
Press the Γ button and then
menu.
VIDEO
Language
Γ
button and then Δ / Ε button to select White Wash.
AUDIO
Orbiter
TIME
Δ
/ Ε button to select On
or
Child lock
Off.
White Wash
Set ID
4.
Press the MENU button.
SCREEN
TWIN
18
MENU
Γ
On
Off
SPECIAL
Prev.
SCREEN Menu
Auto
-
adjustment (RGB1[PC]
mode
Automatically adjusts picture position
Press the MENU button and then
1.
only)
and minimizes
Δ
image shaking.
/ Ε button to select the SCREEN
2.
Press the Γ button and then Δ / Ε button to select Auto
3.
Press the Γ button to start Auto
VIDEO
When Auto
?
If the
Auto
configure.
Manual
Screen
in
adjustment
RGB1(PC),
To set
Position
TIME
after Auto
Γ
Zoom In/Out
configure.
picture needs to be adjusted more
adjust the Manual config..
configure
ARC
AUDIO
SPECIAL
configure has finished, OK will be shown on screen.
position of the image is still not correct, try Auto adjustment again.
?
If
4.
menu.
config.
adj.
Reset
SCREEN
TWIN
you
MENU
Prev.
can
-
-
-
image is still not correct, your Monitor is functioning properly but needs further adjustment.
configure and the Manual config. functions don't need to be run for RGB2 mode.
function doesn't work in RGB-Digital broadcast.
Although
This
Setting
-
-
-
the
The Auto
Picture Format
You
are
You
are
available to 4:3 and 16:9 in
RGB1,RGB2 and COMPONENT.
available to 16:9, 4:3 and ZOOM in VIDEO (AV1 or AV2) and S-VIDEO.
If 4:3 is on the screen for a long time, that fixed image may remain visible.
Press the ARC button to select
1.
?
?
a
desired
picture
format.
Each press of ARC button changes the screen display as shown below.
You can also select 4:3, 16:9 or Zoom in the SCREEN menu.
4:3
Split
-
-
-
-
1.
Zoom
16:9
Zoom
This is the function to
It's available to
enlarge
With 2-SPLIT
ZOOM, you
If
enlarged,
a screen
is
the
with
screen
this function in every
use
can
only
move
the
a screen can move
ration.
regular
input
source.
into upside or downside.
selecting a section of screen.
screen
without
Press the SPLIT ZOOM button.
?
Each press of SPLIT ZOOM button
2-Split
changes
Zoom
the
screen
4-Split
Δ
1
1
Ε
display
as
shown below.
Zoom
9-Split
Zoom
123
Δ
Ε
2
Δ
Ε
456
2
In
case
of
4
ΦΓ
9-Split
5
ΦΓ
usingtheΔ/Ε
move
the
enlarged
screen
with
orΦ/Γbutton.
In
Zoom
123
ΦΓ
Zoom:
Press the number button to select the section you enlarge.
If you choose No.5, the 5 section is enlarged and also can
9-Split
789
case
of
choosing
the No.5
Δ
Ε
456
789
ΦΓ
The 5 section is
changed
to
a
full
screen.
19
Screen Position
-
This function works in the
RGB1-PC
following mode:
480p,720p,1080i.
COMPONENT
or
1.
Press the MENU button and then Δ /
2.
Press the Γ button and then Δ / Ε button to select Position.
3.
Press the Γ button and then Δ / Ε
button to select the SCREEN
Ε
menu.
VIDEO
Auto
AUDIO
configure
ARC
Zoom In/Out
¡ª
/ Γ button to
or Φ
the
adjust
TIME
Position
position.
Manual
SPECIAL
4.
Press the MENU button.
Screen
Γ
¢"
¢'
¡
config.
adj.
Reset
SCREEN
TWIN
Manual
-
-
1.
Configure (RGB1[PC]
If the
isn't clear after auto
picture
phase manually.
To correct the
screen
mode
MENU
only)
adjustment
and
that characters
especially
are
still
the
trembling, adjust
Press the Γ button and then
button to select the SCREEN
Ε
Δ
/ Ε button to select Manual
menu.
VIDEO
AUDIO
config..
3.
Press the Γ button and then Δ / Ε button to to select Phase
4.
Press the Φ / Γ button to make
or
configure
ARC
Zoom In/Out
TIME
Clock.
Position
Manual
config.
Screen
adj.
SPECIAL
5.
?
The
?
The
appropriate adjustments.
0
0
~
TWIN
MENU
Prev.
~
Adjustments (VIDEO (AV1
This is the function to correct
or
trembling
Press the MENU button and then Δ /
2.
Press the
AV2),
S-VIDEO and COMPONENT 480i mode
while
or
picture instability
Ε
button to select the SCREEN
viewing
a
video
menu.
only)
tape.
VIDEO
Auto
button and then
Γ
Δ / Ε
button to select Screen
AUDIO
adj..
TIME
Press the Γ button and then Δ / Ε button to to select TV or VCR.
?
?
Select the VCR
option if watching a VCR.
TV option for other equipment.(Except VCR)
Select the
This function
config.
Screen
adj.
Γ
TV
VCR
SCREEN
TWIN
to
Position
Manual
Reset
Press the MENU button.
Initializing (Reset
configure.
ARC
Zoom In/Out
SPECIAL
4.
Phase
Clock
SCREEN
31.
range of Phase is 0
+50.
range of Clock is -50
1.
3.
Γ
Reset
Press the MENU button.
Screen
-
adjustment
adjustment
picture
size, adjust Clock.
Press the MENU button and then Δ /
Auto
2.
Prev.
MENU
Prev.
factory value)
operates in every mode.
To initialize the
adjusted
value
1.
Press the MENU button and then Δ / Ε button to select the SCREEN
2.
Press the
3.
Press the Γ button.
menu.
VIDEO
Auto
configure.
ARC
Γ
button and then
Δ / Ε
button to select Reset.
AUDIO
Zoom In/Out
Position
TIME
Screen
SPECIAL
?
You
can
initialize ZOOM
tion and sub
picture
In/Out, Position, SPLIT ZOOM, PIP size, PIP posi-
size of twin
config.
adj.
Reset
Γ
SCREEN
picture.
TWIN
20
Manual
MENU
Prev.
To Set
PIP Function
-
-
PIP lets you view 2 different inputs (sources) on your monitor
and the other source will show a smaller inset image.
When you select RGB1 or RGB2 for main
Component 480i for sub picture.
Watching
picture
in
PIP, you
PIP
screen
can
on
the sub
Aspect
pictures.
The sub
to switch it off.
again
time. One
(AV1
or
AV2),
source
will be
S-Video
large,
or
Ratio
Press the PIP ARC button.
?
Press this button
same
watch video
PIP
Press the PIP button to switch
?
at the
picture
appears
as
below.
Component
Video
10:30
4:3
Moving
Swapping
the PIP
16:9
the PIP
Press the SWAP button to
Press the WIN.POSITION button.
Repeatedly press the
position is achieved.
left/right.
the main and sub
exchange
pic-
tures.
Δ / Ε or Φ / Γ button until desired
The sub picture moves up/down or
Video
Component
Component
Video
10:30
10:30
Win. Position
Main Picture
Δ
ΦΓ
Ε
Main Picture Size
Press the ZOOM+/ZOOM- button to
main
picture
Selecting
Adjustment
size when
viewing
enlarge
or
reduce the
the PIP.
Sub Picture
a source
input signal
for the PIP
Press the SUB INPUT button to select the
sub
mode for the
input
picture.
Component
Video
10:30
Zoom In
100
%
Δ
ΦΓ
Ε
?
?
select COMPONENT
PIP Size
sub
?
Press the WIN.SIZE button and then Φ / Γ button to
the sub
picture
PIP
adjust
?
picture mode, main
adjusted simultaneously. With WIN.SIZE
mode, sub picture is adjusted.
is
and sub
480p/720p/1080i,
RGB1
and RGB2 for
picture.
In COMPONENT
480p/720p/1080i for main picture, you can
or AV2) and S-VIDEO for sub picture.
In COMPONENT 480i for main picture, you can select RGB1
and RGB2 for sub picture.
select VIDEO
size.
With WIN.SIZE button in twin
picture
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO (AV1 or AV2) and S-VIDEO for sub picture.
In VIDEO (AV1 or AV2) and S-VIDEO for main picture, you can
(AV1
button in
Main Picture Position
Adjustment
Press the ZOOM+/ZOOM- button.
tion with the Δ / Ε
or Φ
Adjust the
/ Γ buttons in
main
enlarged
picture posimain
picture.
Win. Size
Φ
Γ
Zoom In
100
%
Δ
ΦΓ
Ε
21
TWIN Picture
Main Picture Size
Adjustment
Press the TWIN PICTURE button.
?
Each press of TWIN PICTURE button
changes
the
screen
DW1
Sub Picture Size
display
as
DW2
Adjustment
Off
Selecting
sub
/ Γ button to
a source
for the Twin
picture
Press the SUB INPUT button to select the
Press the WIN.SIZE button.
?
Press the
?
WIN.POSITION function doesn't
Φ
shown below.
adjust
the sub
picture
size.
input
mode for the
picture.
operate in twin picture
Component
mode.
Video
10:30
?
Win. Size
Φ
Γ
?
In RGB1 and RGB2 for main picture, you can select COMPONENT 480i, VIDEO (AV1 or AV2) and S-VIDEO for sub picture.
In VIDEO (AV1 or AV2) and S-VIDEO for main picture, you can
select COMPONENT
sub
?
In COMPONENT
Swapping
the Twin Picture
Press the SWAP button to
ture in twin
picture
exchange
the main and sub
22
pic-
mode.
Component
Component
Video
Video
10:30
RGB1
and RGB2 for
480p/720p/1080i for main picture, you can
or AV2) and S-VIDEO for sub picture.
In COMPONENT 480i for main picture, you can select RGB1
and RGB2 for sub picture.
select VIDEO
?
480p/720p/1080i,
picture.
10:30
(AV1
External Control Device
-
Connect the RS-232C
control the Monitor's
-
-
Connect the serial
input jack to an external
functions externally.
port of the control device
RS-232C connection cables
Type
are
of connector; D-Sub
9-pin
to the RS-232C
supplied
(such
jack
on
as a
computer
or an
the Monitor back
A/V control
system)
Pin
1
No connection
panel.
with the Monitor.
male
name
2
RXD
3
TXD
and
1
No.
5
(Receive data)
(Transmit data)
(DTE side ready)
4
DTR
5
GND
6
DSR
7
RTS
8
CTS
9
No Connection
RS-232C
not
Setup
control device
(DCE side ready)
(Ready to send)
(Clear to send)
9
6
configurations
7-wire
(Standard
3-wire
configuration
(Not standard)
configuration
RS-232C cable)
PC
PDP
RXD
2
3
TXD
TXD
3
2
RXD
PC
PDP
RXD
2
3
TXD
3
2
RXD
GND
TXD
GND
5
5
GND
GND
5
5
DTR
4
6
DSR
DTR
4
4
DTR
DSR
DSR
6
4
DTR
DSR
6
6
RTS
7
8
CTS
RTS
7
7
RTS
8
CTS
CTS
8
RTS
7
D-Sub 9
CTS
8
D-Sub 9
D-Sub 9
D-Sub 9
Control line
Set ID
-
Use this function to
specify
a
monitor ID number.
1.
Press the MENU button and then Δ / Ε button to select the SPECIAL
2.
Press the Γ button and then Δ / Ε button to select Set ID.
menu.
VIDEO
AUDIO
Language
Child lock
Orbiter
TIME
Press the Γ button and then Φ / Γ button to
3.
adjust
Set ID to choose the
White Wash
Set ID
Γ
SPECIAL
1
desired monitor ID number.
SCREEN
4.
?
The
range of Set ID is 1
Refer to 'Real data mapping1' (See
adjustment
99.
~
TWIN
p.28).
MENU
Prev.
Communication Parameters
?
Baud rate
?
Data
?
:
115200
length : 8
Parity : None
bits
bps (UART)
?Stopbit:1bit
?
Communication code
:
ASCII code
23
OK Acknowledgement
Command Reference List
COMMAND 1 COMMAND 2
DATA
(Hexadecimal)
01. Power
k
a
0~1
Input Select
Aspect Ratio
k
b
0~4
k
c
0~2
04. Screen mute
k
d
0~1
05. Volume mute
k
e
0~1
06. Volume control
k
f
0~64
07. Contrast
k
g
0~64
02.
03.
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
receiving
normal data. At this
data is data read
mode, it indicates present status data. If
mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][x]
*
k
h
0~64
The Monitor transmits ACK
(acknowledgement)
k
i
0~64
this format when
abnormal data from
10. Tint
k
j
0~64
non-viable functions
11.
k
k
0~64
12. OSD select
k
l
0~1
13. Remote control lock mode
k
m
0~1
14. PIP/Twin
k
n
0~3
Γ To control Power On/Off of the Monitor.
15. PIP size
k
o
0~1
Transmission
16. PIP
k
q
0~3
17. Treble
k
r
0~64
18. Bass
k
s
0~64
19. Balance
k
t
0~64
20. Colour
k
u
0~3
k
v
0~64
Brightness
Sharpness
position
temperature
21. Red
22.
23.
24.
adjustment
Green adjustment
Blue adjustment
PIP input source
25. Orbiter
26. White Wash
27. Orbiter Time
28. Orbiter Pixel
Setting
Setting
01. Power
receiving
or
communication
on
errors.
[k][a][ ][Set ID][ ][Data][Cr]
Data
0
Power Off
:
1
:PowerOn
1
:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data
0
Power Off
:
w
0~64
k
$
0~64
Γ To show Power On/Off.
k
y
0~4
Transmission
j
j
j
j
p
0~1
q
0~1
r
1~FE
0~9
based
(Command:a)
k
s
on
the data is data write
09. Colour
08.
based
time, if the
[k][a][ ][Set ID][ ][FF][Cr]
Data
0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
When
setting
the 25
28,
a menu
~
doesn't
display
on
screen.
Data
*
0
:
Power Off
1:PowerOn
In like manner, if other functions transmit 'FF' data based
on this format, Acknowledgement data feed back presents
status about each function.
Transmission /
Receiving
Protocol
Transmission
02.
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]
[Command 2]
[Set ID]
Input
select
Γ To select input
(Command:b) (Main picture input)
source
:
k
You
:
To control PDP set.
SELECT button
:
You
can
adjust
the set ID to choose
desired monitor ID number in
special
can
also select
on
an
for the Monitor.
input
using
the INPUT
Transmission
menu.
[k][b][ ][Set ID][ ][Data][Cr]
See
Data
previous page.
Adjustment range is 1 99.
When selecting Set ID '0', every
source
the Monitor's remote control.
~
0
:RGB1
1
:
2
:
Component (or AV1)
Video (or AV2)
S-Video
3
:
4
:RGB2
3
:
4
:RGB2
connected PDP set is controlled.
*
[DATA]
:
To transmit command data.
Transmit 'FF' data to read status of
command.
*
[Cr]
*[]
24
:
:
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
0
:RGB1
ASCII code '0x0D'
1
:
ASCII code
2
:
Carriage
Return
'space (0x20)'
Data
Component (or AV1)
Video (or AV2)
S-Video
03.
Ratio
Aspect
Γ To adjust the
You
(Command:c) (Main picture format)
Γ To adjust
format.
screen
also
adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Special menu.
can
Transmission
:
1
:
2
:
Wide
(16:9)
Normal screen (4:3)
Full screen (Zoom)
*
1
:
2
:
Using
Wide
Min:0~Max:64
08.
screen
You
you select either 16:9
input,
or
4:3
screen
in the video
menu.
Min:0~Max:64
Refer to 'Real data
mapping1' (See p.28).
mute on/off.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
1
:
Screen mute
0
:
Screen mute off
Data
(Picture off)
(Picture on)
on
(Command:i)
Γ To adjust the
You
[d][ ][Set ID][ ][OK][Data][x]
1
:
Screen mute
0
:
Screen mute off
mute
using
the MUTE button
on
Transmission
1
:
Volume mute off
Refer to 'Real data
(Volume off)
(Volume on)
on
menu.
mapping1' (See p.28).
Min:0~Max:64
10. Tint
[k][e][ ][Set ID][ ][Data][Cr]
Volume mute
colour.
colour in the video
[i][ ][Set ID][ ][OK][Data][x]
Data
:
adjust
Acknowledgement
remote control.
0
screen
Min:0~Max:64
*
mute on/off.
adjust
also
[k][i][ ][Set ID][ ][Data][Cr]
(Command:e)
Γ To control volume
can
Transmission
(Picture off)
(Picture on)
on
Data
05. Volume mute
Min:0~Max:64
09. Colour
Acknowledgement
Data
brightness.
adjust brightness
screen
also
[k][h][ ][Set ID][ ][Data][Cr]
screen
also
can
Transmission
Data
(Command:d)
[k][d][ ][Set ID][ ][Data][Cr]
can
mapping1' (See p.28).
Brightness (Command:h)
Γ To adjust
Transmission
You
Refer to 'Real data
Min:0~Max:64
*
Data
menu.
[k][g][ ][Set ID][ ][Data][Cr]
Data
04. Screen mute
Data
contrast in the Picture
[g][ ][Set ID][ ][OK][Data][x]
aspect ratio.
Γ To select
contrast.
adjust
Acknowledgement
(16:9)
Normal screen (4:3)
Full screen (Zoom)
the PC
also
screen
[c][ ][Set ID][ ][OK][Data][x]
:
can
(Command:g)
screen
Transmission
*
Acknowledgement
Data 0
You
Data
[k][c][ ][Set ID][ ][Data][Cr]
Data 0
07. Contrast
(Command:j)
Γ To adjust the
You
can
also
screen
adjust
tint.
tint in the video
menu.
Transmission
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
[k][j][ ][Set ID][ ][Data][Cr]
Data
Data
0
:
Volume mute
1
:
Volume mute off
06. Volume control
(Volume off)
(Volume on)
on
(Command:f)
Γ To adjust volume.
You
on
can
also
adjust
Red:0~Green:64
*
Refer to 'Real data
mapping1' (See p.28).
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red:0~Green:64
volume with the volume buttons
remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping1' (See p.28).
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
25
11.
Sharpness (Command:k)
Γ To adjust the
You
can
also
15. PIP Size
the video
You
menu.
Data0:
mapping1' (See p.28).
picture
format
4:3
[k][ ][Set ID][ ][OK][Data][x]
[o][ ][Set ID][ ][OK][Data][x]
Data
Data0:
Min:0~Max:64
16. PIP
(Command:l)
1:
16:9
4:3
1:
16:9
position (Command:q)
You
also
can
adjust
WIN.POSITION
on
the sub
picture position using the
or in the Special menu.
the remote control
Transmission
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
:OSDoff
[k][q][ ][Set ID][ ][Data][Cr]
1:OSDon
Data
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0
:OSDoff
1:OSDon
down
0
:
Right
1
:
Left down
2
:
Left up
3
:
Right
on screen
on screen
on screen
up
on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
13. Remote control lock mode
Γ To lock the front panel controls
(Command:m)
on
Data
the monitor and remote
control.
[k][m][ ][Set ID][ ][Data][Cr]
0
:
Lock off
:
Right
1
:
Left down
2
:
Left up
3
:
Right
17. Treble
1:Lockon
You
[m][ ][Set ID][ ][OK][Data][x]
*
If
0
:
you're
Lock off
not
use
the remote
on/off,
control,
can
remote control lock is released.
the remote control
using
or
Transmission
Data
1
:
PIP/DW off
:PIP
2:DW1
3:DW2
1
PIP/DW off
:PIP
treble in the audio
Refer to 'Real data
mapping1' (See p.28).
[r][ ][Set ID][ ][OK][Data][x]
the PIP
in the
or
Twin
Special
pic-
Data
Min:0~Max:64
menu.
(Command:s)
You
can
also
adjust
bass in the audio
menu.
Transmission
Data
2:DW1
3:DW2
Min:0~Max:64
*
Refer to 'Real data
mapping1' (See p.28).
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data
26
menu.
[k][s][ ][Set ID][ ][Data][Cr]
[n][ ][Set ID][ ][OK][Data][x]
:
adjust
Γ To adjust bass.
Acknowledgement
Data 0
also
Min:0~Max:64
18. Bass
[k][n][ ][Set ID][ ][Data][Cr]
Data 0
can
Acknowledgement
(Command:n)
also control the PIP/DW
on
(Command:r)
[k][r][ ][Set ID][ ][Data][Cr]
set this mode.
Γ To control the PIP (Picture In picture).
You
on screen
Transmission
*
ture button
on screen
up
1:Lockon
When main power is
14. PIP / Twin
on screen
on screen
Γ To adjust treble.
Acknowledgement
Data
down
0
Transmission
Data
the
Γ To select sub picture position for PIP.
Γ To select OSD (On Screen Display) on/off.
Data0
using
Acknowledgement
Acknowledgement
12. OSD select
PIP
[k][o][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
Refer to 'Real data
select the
the remote control.
on
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
*
also
can
WIN.SIZE
Transmission
Data
(Command:o)
Γ To select the PIP picture format.
sharpness.
adjust sharpness in
screen
Min:0~Max:64
19. Balance
24. PIP
(Command:t)
Γ To adjust balance.
You
can
also
adjust
balance in the audio
menu.
Refer to 'Real data
Data
mapping1' (See p.28).
Acknowledgement
picture
in PIP mode.
0
:
RGB1
2
:
Video
4
:RGB2
(or AV2)
1
:
Component (or AV1)
3
:
S-Video
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
[y][ ][Set ID][ ][OK][Data][x]
Min:0~Max:64
20. Colour
for sub
Transmission
Min:0~Max:64
Data
(Command:y)
source
[k][y][ ][Set ID][ ][Data][Cr]
[k][t][ ][Set ID][ ][Data][Cr]
*
select
Γ To select input
Transmission
Data
input
Data
temperature (Command:u)
0
:
RGB1
2
:
Video
4
:RGB2
(or AV2)
1
:
Component (or AV1)
3
:
S-Video
Γ To adjust colour temperature.
You
can
also
adjust
CSM in the video
menu.
25. Orbiter
Transmission
(Command:p)
[k][u][ ][Set ID][ ][Data][Cr]
Data
0: Normal
1: Cool
2: Warm
3: User
Transmission
Acknowledgement
[j][p][ ][Set ID][ ][Data][Cr]
[u][ ][Set ID][ ][OK][Data][x]
Data
0: Normal
21. Red
Γ To control the orbiter function on/off.
1: Cool
2: Warm
3: User
Adjustment (Command:v)
Data
0
:
Orbiter off
1
:
Orbiter
on
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
Γ To adjust red in colour temperature.
Data
Transmission
0
:
Orbiter off
1
:
Orbiter
on
[k][v][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
2'
(See p.28).
26. White Wash
(Command:q)
Acknowledgement
Γ To control the white wash function on/off.
[v][ ][Set ID][ ][OK][Data][x]
Transmission
Data
[j][q][ ][Set ID][ ][Data][Cr]
Min:0~Max:64
Data
22. Green
Adjustment (Command:w)
Γ To adjust green in colour temperature.
0
:
White Wash off
1
:
White Wash
on
Acknowledgement
Transmission
[q][ ][Set ID][ ][OK][Data][x]
[k][w][ ][Set ID][ ][Data][Cr]
Data
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
2'
0
:
White Wash off
1
:
White Wash
on
(See p.28).
Acknowledgement
[w][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
23. Blue
Adjustment (Command:$)
Γ To adjust blue in colour temperature.
Transmission
[k][$][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:64
*
Refer to 'Real data
mapping
2'
(See p.28).
Acknowledgement
[$][ ][Set ID][ ][OK][Data][x]
Data
Min:0~Max:64
27
27. Orbiter Time
Setting (Command:r)
Γ To adjust orbiter operation time
term.
Transmission
[j][r][ ][Set ID][ ][Data][Cr]
Data
Min:1~Max:FE
*
Refer to 'Real data
mapping1'
as
shown below.
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Data
Min:1~Max:FE
28. Orbiter Pixel
Setting (Command:s)
Γ To adjust pixel number in orbiter function.
Transmission
[j][s][ ][Set ID][ ][Data][Cr]
Data
Min:0~Max:9
*
Refer to 'Real data
mapping1'
as
shown below.
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data
*
Min:0~Max:9
Real data
0
mapping
1
:Step0
*
Real data
0:-10
5:-9
A:Step10(SetID10)
A:-8
F :Step15(SetID15)
10:Step16(SetID16)
2D: -1
32: 0
37: +1
64
:
Step
100
5F: +9
64: +10
28
mapping
2
NOTE
29
check list
Troubleshooting
No
picture
&
?
Check whether the Monitor is turned
?
Power cord inserted into wall outlet?
on.
No sound
?
Plug
another
power cord
product's
was
power cord into the wall outlet where the Monitor's
plugged
in.
?
Press the VOLUME
?
Sound muted? Press MUTE button.
?
Check to
(Γ)
button.
Picture OK &
No sound
see
if there is any
remote control
The remote control
?
doesn't work
Check to
?
Install
or
Poor colour
Poor
are
between the Plasma
Display
installed with the correct
new
batteries.
(Refer
to
and the
polarities. (Refer
menu
and press the VOLUME
(Γ)
button.
certain distance between the Monitor and the VCR.
Keep
?
Activate any function to restore the
a
one
of the
the
?
Adjust
?
Typical
screen
for
more
than 5
Balance in the AUDIO
brightness
minutes,
menu.
the
(Refer
of the
screen
to
picture. (If
still
gets dark.)
p.16)
speakers
sound from the
Monitor
30
(Refer
p.15)
picture
output from
Strange
to
p.11)
?
on
No
if the batteries
Select Colour in the VIDEO
to
or
object
obstruction.
p.11)
?
No
see
causing
sound due to normal Monitor
operation,
Monitor is not
faulty.
picture
is
Product
specifications
MODEL
MT-50PZ40/H/A/B/K/R/S
MZ-50PZ42/H/A/B/K/R/S
MT-50PZ41/H/A/B/K/R/S
MZ-50PZ43/H/A/B/K/R/S
MT-50PZ43/H/A/B/K/R/S
Width
(inches
/
mm)
48.2 / 1223
Height (inches
/
mm)
28.9 / 734
Depth (inches
/
mm)
4.1 / 105
/
99.2 / 45
Weight (pounds
Power
kg)
requirement
AC100-240V
Resolution
1366
Colour
specifications
shown above may be
(Dot)
0~40°C
Humidity (In operation)
The
768
16,770,000 (256 steps of each R, G and B)
Temperature (In operation)
?
x
50/60Hz
~
under 80%
changed
without notice for
quality improvement.
31
Download PDF