LG | RE-32FZ10PX | LG RE-32FZ10PX Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0269D
(MC017A, 032U/V TX)
(3840VA0024A/B, 3840VA0016A, 373-026F)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Calling the programme table
Setting
9
Picture adjustment
PSM / YNR (Y-signal Noise Reduction)
Picture adjustment / Picture format
Turbo picture selection
14
Sound adjustment
SSM (Sound Status Memory) / Turbo sound selection
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
16
Other functions
TV and AV modes / Auto AV switching (option)
Child lock / Auto sleep / Blue back (option)
Tilt / Degaussing / Sleep timer
19
PIP
21
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
22
Connection of external equipment
Aerial socket
Euro scart socket
Audio/Video in sockets
Audio out sockets (AUDIO OUT)
S-Video/Audio in sockets (S-AV)
Headphone socket
25
Troubleshooting
2
check list
27
Installation
Power
This set
ed
on
operates
the label
on an
AC mains
the back
on
In the event of thunderstorms
ial and mains
supply, the voltage is as indicatapply DC power to the set.
powercuts, please pull out the aer-
cover.
or
Never
plugs.
Warning
To
prevent fire
shock hazard, do not expose the set to rain
or
or
moisture.
Wiring (in U.K. only)
This set is
supplied with a BS 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover
dealer
omitted. To obtain
or
replacement
a
fuse
cover
contact your
"LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning (in U.K. only)
A mains
plug removed
destroyed. A mains plug
a
from the mains lead of this set must be
with bared wires is hazardous if inserted in
mains socket.
Do not connect either wire to the earth
or
with the earth
symbol
or
If any other plug is fitted,
the distribution board.
pin,
marked with the letter E
coloured green
use a
5 amp
or
green and
yellow.
fuse, either in the plug,
or
at
Important (in U.K. only)
The wires in this mains lead
lowing
are
coloured in accordance with the fol-
codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed
as
follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N
is coloured
brown
must
marked with the letter L
or
coloured black. The wire which
be connected to the terminal which
or
is
coloured red.
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
the
unnecessary vibration, moisture, dust or heat. Also ensure that the
placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
set is
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
POWER
Before you use the remote control handset,
teries. See the next page.
MUTE
1
13
2
1
2
3
4
5
6
7
8
9
0
TV/AV
PICTURE
MENU
1.
2.
ARC
14
3
SOUND
POWER
switches the set
please
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
3.
ARC
4.
TURBO PICTURE BUTTON
selects Turbo picture.
install the bat-
standby.
select
a
number.
(Aspect Ratio Control)
changes the picture format.
15
4
OK
TURBO
PR
5
VOL
VOL
TURBO SOUND BUTTON
selects Turbo sound.
PR
REW
PLAY
FF
P/STILL
STOP
REC
5.
6
789
I/II
SSM
LIST
PSM
TEXT
PIP
16
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume Up/Down)
adjusts the volume.
17
adjusts
settings.
accepts your selection
10
11
12
menu
OK
EYE/
MIX
TIME
REVEAL
? SLEEP
SIZE
STILL
POSITION
SCAN
PR
PR
SWAP
M
i
displays
the current mode.
6.
VCR BUTTONS
control a LG video cassette recorder.
7.
SSM (Sound Status Memory)
recalls your preferred sound setting.
8.
I/II
selects the language during dual language broadcast.
selects the sound output (option).
9.
PSM (Picture Status
recalls your preferred
18
INPUT
or
19
Memory)
picture setting.
(With PIP)
10. EYE/* (option)
switches the eye function
11. SLEEP
sets the
sleep
timer.
12. STILL
freezes motion of the
4
on or
picture.
off.
Location and function of controls
13. MUTE
switches the sound
on or
off.
14. TV/AV
selects TV or AV mode.
clears the menu / text from the screen.
switches the set on from standby.
15. MENU
selects
a menu.
POWER
displays
2
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode through 4 sub
or
3
4
5
6
7
8
9
0
TV/AV
PICTURE
MENU
14
SOUND
15
4
OK
TURBO
PR
5
VOL
VOL
PR
6
REW
PLAY
FF
P/STILL
STOP
REC
pic-
789
I/II
SSM
LIST
PSM
TEXT
PIP
16
EYE/
10
11
Q.VIEW
previously
viewed programme.
In teletext mode, the PR +/-, SWAP/Q.VIEW and INPUT buttons are used for teletext function.
:
Battery
2
ARC
18. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
returns to the
1
3
tures.
19. SWAP
13
the programme table.
17. PIP BUTTONS
PIP
Note
MUTE
1
16. LIST
12
MIX
TIME
REVEAL
SIZE
STILL
POSITION
PR
PR
? SLEEP
Q.VIEW
SCAN
M
i
18
INPUT
installation
19
The remote control handset is powered by two AA type batteries. To
load the batteries, turn the remote control handset over and open
the battery compartment. Install two batteries as indicated by the
polarity symbols ( + and ) marked inside the compartment.
-
(Without PIP)
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
RE/RL-32FZ10 series
MENU
6
7
OK
VOL
PR
ON/OFF
S-VIDEOL/MN
123
5
4
RE/RL-28FZ10 series
AUDIO
R
Side
MENU
AV3
OK
VOL
PR
ON/OFF
panel
12345
1.
2.
MAIN POWER
switches the set
on or
off.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
dims when the set is switched on.
3.
REMOTE CONTROL SENSOR
4.
MENU
selects
5.
standby
mode.
a menu.
OK
accepts your selection or displays the
Φ / Γ (Volume Up/Down)
current mode.
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
6
6.
HEADPHONE SOCKET
Connect the headphone plug to this socket.
7.
AUDIO/VIDEO IN SOCKETS (AV3)
Connect the audio/video out sockets of external equipment to
these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO VCR to the SVIDEO socket.
Connect the audio out sockets of the S-VIDEO VCR to the
audio sockets as in AV3.
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV or
NUMBER buttons on the remote control handset to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
Volume
programme number with the Δ / Ε
or
NUMBER
POWER
MUTE
1
2
3
4
5
6
7
8
9
0
TV/AV
adjustment
Press the Φ / Γ button to
adjust
MENU
SOUND
the volume.
OK
TURBO
Quick view
PR
Press the SWAP
were
or
Q.VIEW button to view the last programme you
VOL
VOL
PR
watching.
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
by pressing
display
the MUTE, Φ / Γ, SSM, I/II, TURBO
I/II
SSM
SOUND button.
Auto Demonstration
programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto
demonstration, press any button of the front panel control and
POWER button of the remote control.
To review all the
ton of the front
menus
panel
SWAP
On
screen
language
selection
The menu can be displayed
First select your language.
on
the
(option)
screen
in desired
language.
1.
2.
3.
Press the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Language.
Press the Γ button and then Δ / Ε button to select your desired
4.
All the on screen displays will appear in the selected language.
Press the OK or Φ button to select the Station menu.
Press the TV/AV button to return to normal TV viewing.
language.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
3.
4.
the MENU button to display each menu.
Press the Γ button and then Δ / Ε button to select a menu item.
Press the Γ button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
Repeatedly press
Φ/ΓorΔ/Ε.
You can move to the higher level menu by pressing the OK or
Φ button and to move to the lower level menu by pressing the
Γ button.
Note :
In the AV mode, the Station menu is not displayed.
a.
b. In the teletext mode, menus are not displayed.
c.
On some models, the BG, L will display.
d. On some models, the Language will not display.
MENU
CH.
OK
AutoOprogramme
ManualOprogramme
{
System
StorageOfrom
{
OBG
{
{
OOI
ProgrammeOedit
{
Start
{
ODK
Language
{
PR
VOL
VOL
PR
()O{OOKOMENUOTV
AV
Station
CH.
AV
PSM
{
PR.
{
O1
YNR
{
System
{
OO
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
User
()O{OOKOMENUOTV
Picture
CH.
()O}{OOKOMENUOTV
menu
AV
()O}{OOKOMENUOTV
AV
menu
SSM
{
00O-O-O-O-O- OO05O SO 6O
9
Balance
{
01O CO 0O
3OO06O SO 1O
7
AVL
{
02O CO 1O
2OO07O SO 2O2
{
03O SO 6O6OO08O CO 0O9
§Volume
04O SO 6O7OO09O CO 1O1
DeleteOOOCopy
MoveOOOOOSkip
()O{OOKOMENUOTV
Sound
CH.
()O}{O OKOMENUOTV
menu
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
Special
TV programme
8
AV
AV
menu
AV
Setting up
TV stations
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
tuning
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
()O{OOKOMENUOTV
Station
Menu
{
AV
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
2.
the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Auto pro-
3.
gramme.
Press the Γ button to
1.
Repeatedly press
display
the Auto programme
System
StorageOfrom
{
OBG
{
OOI
Start
{
ODK
1
2
3
4
5
6
7
8
9
0
TV/AV
menu.
OO
MENU
()O}{OOKOMENUOTV
AV
OK
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
L
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
5. Press the OK or Φ button.
6. Press the Δ / Ε button to select Storage from.
7.
Press the Γ button. Select the beginning programme number
with the Φ / Γ button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
8. Press the OK button.
9. Press the Δ / Ε button to select Start.
10. Press the Γ button to begin auto programming.
4.
System
StorageOfrom
{
Start
{
PR
VOL
VOL
PR
{
OOC O01O(BG)
77O7O7O736%
MENU
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11. Press the TV/AV button to return to normal TV
viewing.
9
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
()O{OOKOMENUOTV
{
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
AV
2.
the MENU button to select the Station menu.
Press the Γ button and then Δ / Ε button to select Manual
3.
programme.
Press the Γ button to
1.
Repeatedly press
the Manual programme
display
menu.
1
2
3
4
5
6
7
8
9
0
PR.
{
O1
System
{
OO
Channel
{
Fine
{
Search
{
Name
{
Booster
{
TV/AV
()O}{O OKOMENUOTV
AV
MENU
OK
4.
5.
PR
VOL
VOL
PR
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the Δ / Ε button to select PR..
Press the Γ button to select the programme number. Select the
desired programme number (0 to 99) with the Φ / Γ button or
NUMBER buttons on the PR. pull-down menu. Any number under
10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the Δ / Ε button to select System.
Press the Γ button. Select a TV system with the Δ / Ε button
on the System pull-down menu;
L
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the OK or Φ button.
Press the Δ / Ε button to select Channel.
Press the Γ button. Press the Δ / Ε button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or Φ button.
Press the Δ / Ε button to select Search.
Press the Γ button. Press the Φ / Γ button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
{{{{
Stored
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV button to return to normal TV
10
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
4.
Press the Δ / Ε button to select Name.
Press the Γ button on the Name pull-down
Press the Δ button. You
and the
alphabet
can use a
blank,
CH.
1 to 3.
6.
your choice of the second character, and
Press the OK button.
7.
Press the TV/AV button to return to normal TV
pressing
opposite
so on.
viewing.
2.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Booster.
3.
Press the Γ button.
4.
Press the Δ / Ε button to select On
down menu.
5.
Press the OK
6.
Press the TV/AV button to return to normal TV
or Φ
3
4
5
6
7
8
9
0
TV/AV
or
Off
on
MENU
the Booster
OK
pullPR
button.
fine
tuning
is
VOL
if
only necessary
viewing.
VOL
PR
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
Press the Γ button.
Repeat
PR.
{
System
{
Channel
{
Fine
{
Search
{
Name
{
Booster
{
}{O OKOMENUOTV
{{{{
AV
Press the Φ / Γ button to fine tune for the best
sound
6.
2
tuning
Normally
5.
1
Repeat
Fine
4.
AV
the Φ / Γ button and then take
When the interference between programmes appear, select Booster
to Off.
3.
{
Station
Menu
direction.
Booster
1.
Language
()O{OOKOMENUOTV
select in the
5.
2.
ProgrammeOedit
{
{
+, -, the numeric 0 to 9
With the Ε button you
Select the position by
1.
{
menu.
A to Z.
can
AutoOprogramme
ManualOprogramme
on
the Fine
pull-down
picture
and
menu.
Press the OK button.
Press the TV/AV button to return to normal TV
The
ber
finely tuned programme will be
during programme selection.
indicated
viewing.
by a yellow
num-
11
Setting up
Station
Menu
CH.
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
{
Language
{
()O{OOKOMENUOTV
AV
{
Programme
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the Γ button to display the Programme edit menu.
Repeatedly press
00O-O-O-O-O- OO 05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O
7OO09O CO 1O1
1
2
3
4
5
6
7
8
9
0
TV/AV
DeleteOOOCopy
MoveOOOOOSkip
()O}{O OKOMENUOTV
AV
Deleting
1.
2.
MENU
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
00O-O-O-O-O- OO 05O SO 6O9
OK
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O
7OO09O CO 1O1
PR
VOL
VOL
PR
Delete
MENUOTV
AV
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/ Γ button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
00O-O-O-O-O- OO 05O SO 6O9
01O CO 0O3OO06O SO 1O7
02O CO 1O2OO07O SO 2O2
03O SO 6O6OO08O CO 0O9
04O SO 6O
7OO09O CO 1O1
MoveOOff
()O}{O MENUOTV
AV
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
Calling
TV stations
the programme table
can check the programmes stored in the memory
the programme table.
You
Displaying programme
table
Press the LIST button to
display
the
by displaying
Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
00O-O-O-O-O- OO 05O SO 6O9
01O CO 0O
3OO06O SO 1O
7
02O CO 1O
2OO07O SO 2O
2
03O SO 6O
6OO08O CO 0O9
04O SO 6O7OO09O CO 1O1
()O}{O OKOMENUOTV
AV
TV/AV
Note
a.
:
You may find some blue programmes. They have been set up to
skipped by auto programming or in the programme edit mode.
be
b.
OK
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
VOL
Selecting
a
programme in the programme table
VOL
PR
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
programme table
LIST
10 programme table pages in which contain 100 pro-
grammes.
Pressing the Δ / Ε
or Φ
/ Γ button
repeatedly
Press the TV/AV button to return to normal TV
turns the pages.
viewing.
13
Picture
Picture
Menu
CH.
PSM
{
YNR
{
User
{
()O{OOKOMENUOTV
PSM
1.
2.
3.
adjustment
(Picture Status Memory)
the MENU button to select the Picture menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture
setting on the PSM pull-down menu.
Repeatedly press
AV
CH.
PSM
{
Dynamic
YNR
{
Standard
User
{
Mild
User
()O}OOKOMENUOTV
4.
5.
Press the OK or Φ button.
Press the TV/AV button to return to normal TV
viewing.
also recall a desired picture (Dynamic, Standard, Mild
or User) with PSM button on the remote control. The picture
Dynamic, Standard and Mild are programmed for optimum picture reproduction at the factory and cannot be changed.
You
TV/AV
AV
can
MENU
YNR
OK
PR
VOL
VOL
PR
(Y-signal
1.
2.
3.
4.
5.
Reduction)
during
the MENU button to select the Picture
Press the Γ button and then Δ / Ε button to select YNR.
Press the Γ button and then Δ / Ε button to select On
on the YNR pull-down menu.
Press the OK or Φ button.
Press the TV/AV button to return to normal TV viewing.
menu.
on
Repeatedly press
or
Off
adjustment
adjust picture contrast, brightness, colour intensity, sharpness and tint (NTSC input only) to the levels you prefer.
1.
Repeatedly press the MENU button to select the Picture menu.
2.
3.
can
Press the Γ button and then Δ / Ε button to select User.
Press the Γ button and then Δ / Ε button to select the desired
picture item on the User pull-down menu.
CH.
PSM
{
YNR
{
User
{
()O}{O OKOMENUOTV
4.
5.
Contrast
{
Brightness
{
Colour
{
Sharpness
{
AV
Press the Γ button.
Press the Φ / Γ button to make
each sub menu.
appropriate adjustments
Contrast
()O}{O OKOMENUOTV
6.
7.
14
the
screen
Picture
You
PSM
Noise
To reduce the picture noise which may appear
watching the TV in a weak signal area.
on
the
80
AV
You can also select other User items directly with Δ / Ε button
and adjust them with Φ / Γ button.
Press the OK button to store it for the picture User.
Press the TV/AV button to return to normal TV viewing.
Picture
adjustment
Picture format
You
can
watch TV in various
picture formats; 4:3, 16:9, 14:9,
Zoom1, Zoom2, Auto.
Repeatedly press the ARC
4:3
This
picture
button to select your desired
format is 4 to 3 of
general
picture format.
TV.
16:9
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with Δ / Ε button.
Zoom 1
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture may
be lost. You can move the screen up or down with Δ / Ε button.
ARC
PICTURE
TURBO
PR
PR
Zoom 2
You can enjoy a larger magnified screen in this mode. The screen
Zoom 2 is viewed just like that but the screen 16:9 is magnified
more and more to the left and right so that the screen Zoom 2 is full.
Auto
When your TV receives the wide
chang to the picture format sent.
screen
Note : In the double window and
available.
Turbo
picture
signal,
it will
automatically
PSM
EYE/
scan
mode, ARC function isn't
selection
When this function is on, the picture will be more brilliant and distinct than normal.
Repeatedly press the TURBO PICTURE button to switch on or off.
(Turbo Picture off)
Note
:
If you press the PSM
(Turbo Picture on)
or
EYE/* button with the Turbo
picture
function, the Turbo picture function is automatically switched off.
15
Sound
Sound
Menu
CH.
SSM
{
Balance
{
AVL
{
§Volume
{
()O{OOKOMENUOTV
AV
SSM
You
adjustment
(Sound Status Memory)
can
select your preferred sound setting; DBS, Flat, Music,
and you can also adjust the sound frequency of
Speech or Movie
the equalizer.
1.
2.
3.
the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
Repeatedly press
CH.
SSM
{
DBS
Balance
{
Flat
AVL
{
Music
{
Speech
§Volume
Movie
User
()O}OOKOMENUOTV
TV/AV
AV
Sound Frequency Adjustment
a. Press the Γ button in User to
MENU
SOUND
TURBO
{
display
the User sub
menu.
OK
0.1O0.5O1.5O5.0O10OkHz
()O}{O OKOMENUOTV
AV
PR
VOL
VOL
PR
b. Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
c.
Press the TV/AV button to return to normal TV
SSM
viewing.
You can also recall a desired sound (DBS, Flat, Music, Speech,
Movie or User) with SSM button on the remote control. The sound
DBS, Flat, Music, Speech and Movie are programmed for optimum
good sound reproduction at the factory and cannot be changed.
If you press the SSM button after making appropriate adjustthe display User automatically
appears even though you have already set a factory preset setting;
DBS, Flat, Music, Speech or Movie.
Note
:
ment on the User sub menu,
Turbo sound selection
When this function is on, the sound will be more emphasized and
amplified sound than normal sound. You can enjoy the Turbo
Sound so much better than normal Sound.
Repeatedly press the TURBO SOUND button to switch on or off.
MEGA TURBO
(Turbo Sound off)
16
(Turbo Sound on)
Sound
Sound
adjustment
adjustment
CH.
You can adjust balance, headphone volume/sound, AVL (Auto
Volume Leveler). AVL automatically keeps on an equal volume level
even if you change programmes.
SSM
{
Balance
{
AVL
{
§Volume
{
()O{OOKOMENUOTV
1.
2.
3.
Sound
Menu
AV
the MENU button to select the Sound menu.
Press the Γ button and then Δ / Ε button to select the desired
sound item; Balance, AVL or §Volume.
Make desired adjustment with the Φ / Γ, Δ / Ε or OK button
on each pull-down menu.
Repeatedly press
CH.
SSM
{
Balance
{
AVL
{
On
{
Off
§Volume
()O}OOKOMENUOTV
TV/AV
AV
MENU
4.
Press the TV/AV button to return to normal TV
viewing.
PR
VOL
VOL
PR
17
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
Language
If
selection for dual
language
broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the louda
speakers.
DUAL I+II sends
NICAM
I/II
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
18
Other functions
TV and AV modes
CH.
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the set.
Inputs
can
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Input.
Press the Γ button and then Δ / Ε button to select TV, AV1,
AV2, AV3 on the Input pull-down menu.
Repeatedly
CH.
Input
{
TV
ChildOlock
{
AutoOsleep
{
BlueOback
{
AV1
AV2
AV3
Tilt
{
Degauss
{
()O}OOKOMENUOTV
4.
AV1 :
AV2 :
AV3 :
Press
AV
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
Alternatively
you
TV/AV button.
can
select the TV
or
AV mode
In AV mode, to return to TV mode, press the Δ / Ε
by pressing
or
Menu
AV
1
2
3
4
5
6
7
8
9
0
TV/AV
VCR connected to the Euro scart socket 1 on the set
VCR connected to the Euro scart socket 2 on the set
VCR connected to the AV3 sockets on the set
the TV/AV button to return to normal TV viewing.
Special
MENU
the
NUMBER but-
tons.
PR
VOL
VOL
PR
Auto AV
switching (option)
If your VCR outputs a switching voltage when connected to the
Euro scart socket, the set will switch to AV mode automatically.
But if you want to keep on watching TV mode, press the Δ / Ε or
NUMBER buttons.
Press the TV/AV button to return to AV modes.
Child lock
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off on
the Child lock pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select On on the Auto sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
press the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off on
the Auto sleep pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly
19
Other functions
Special
Menu
CH.
Input
{
ChildOlock
{
AutoOsleep
{
BlueOback
{
Tilt
{
Degauss
{
()O{OOKOMENUOTV
AV
Blue back
(option)
If you select On
on
ground appears
on
1.
2.
3.
4.
the Blue back pull-down menu, the blue backthe screen when there is no or poor signal.
the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Blue back.
Press the Γ button and then Δ / Ε button to select On or Off
on the Blue back pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Note : The blue background automatically appears
when there is no signal in AV mode.
on
the
screen
Tilt
The TV
another
1.
2.
3.
TV/AV
MENU
4.
picture may tilt to the left
position. This function can
or right if the TV set moves to
be used to compensate the tilt.
the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Tilt.
Press the Γ button and then Φ / Γ button to adjust the tilt on
the Tilt pull-down menu.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Degaussing
PR
VOL
Owing to the super large used in the set. The colour purity of the
picture may be affected by other magnetic influences such as
speakers. Stripes may appear on the screen or there may be colour
patches.
You can restore high colour quality by operating the Degaussing
VOL
PR
function.
1.
2.
3.
4.
SLEEP
M
the MENU button to select the Special menu.
Press the Γ button and then Δ / Ε button to select Degauss.
Press the Γ button and then Δ / Ε button to select On on the
Degauss pull-down menu. After the degauss function works,
On mode switches to Off mode.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Note : If you cannot adjust the
it again after about 4 minutes.
Sleep
screen
condition
by degaussing, try
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The dis0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
Note :
a.
To view the
remaining sleep time, press
the SLEEP button
once.
b.
c.
20
To cancel the sleep time, repeatedly press the SLEEP button
until the display
0 appears.
When you switch the set off, the set releases the preset sleep
time.
PIP
Option
PIP is
operation (option)
:
optional function, so that only the set with PIP function
operate.
PIP (Picture in Picture) displays a picture within a picture.
an
can
On and off
Press the PIP button to switch on the sub
press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
displayed as shown below.
ture is
Programme
Swapping
number
picture.
mode for the sub
AV2
between main and sub
Press the SWAP button to
Programme
exchange
selection for sub
mode for the sub
input
AV1
picture.
pic-
AV3
pictures
the main and sub
pictures.
picture
Press the PR +/- button. The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
Note
ture
picture
: When the sub picture
quality might get poor.
Sub
picture
1/9 size
1/2 size
PIP
size is 1/2 of the main
picture,
the pic-
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture
picture.
SIZE
STILL
PR
PR
POSITION
SWAP
SCAN
i
INPUT
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub picture moves clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations in 4 sub
pictures mode only and see your favorite station by exchanging the
main and sub pictures.
Press the SCAN button to select 4 sub pictures. Only the selected
pictures search all the stored stations
Press the SCAN button again to switch off these sub pictures.
4 sub
.
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
1
2
3
4
5
6
7
8
9
0
TV/AV
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
OK
PR
SIMPLE text
PR
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
lowing page.
TEXT
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
button to switch to LIST mode.
M
or
FASTEXT mode, press the
M
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
22
coloured button.
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
1
2
3
4
5
6
7
8
9
0
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
PR
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
lowing page.
i
23
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
1
2
3
4
5
6
Press this
7
8
9
page.
Press this button
Press this button to
again
half of the page.
the bottom half of the
to return to the normal
display.
0
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
PR
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
MIX
TIME
REVEAL
SIZE
STILL
POSITION
?
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press this button
24
again
to exit this function.
or
Connection of external
You
can connect additional
etc. to your set.
equipment,
such
as
equipment
VCRs, camcorders
Here shown may be somewhat different from your set.
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
ANT IN
75Ω
(L)
(R)
OUT
AUDIO
I
2
VCR
Euro scart sockets
1.
2.
Connect the Euro scart socket of the VCR to the Euro scart
socket 1 or 2 of the set.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage when connected to Euro
scart socket 1 or 2, the set will switch to AV 1 or AV 2 mode automatically. But if you want to keep on watching TV mode, press
the Δ / Ε or NUMBER buttons.
Otherwise press the TV/AV button
on
set to select AV 1 or AV 2. The VCR
on
the
You
ANT IN
75Ω
(L)
(R)
OUT
AUDIO
I
2
the remote control hand-
playback picture appears
VCR
screen.
can
also record programmes received
by
the TV
on
video
tape.
Note
a.
b.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1. These signals are
transmitted, for example, pay TV decoder, game machine or
photo CD unit, etc.
If both Euro scart 1 and 2 sockets have been connected to the
VCRs simultaneously, only the AV 2 can be received.
Signal type RGB,
Audio/Video in sockets
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the TV/AV button to select AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
S-VIDEOL/MN
AUDIO
R
AV3
VCR
25
Connection of external
Audio out sockets
ANT IN
75Ω
(L)
(R)
OUT
AUDIO
I
2
equipment
(AUDIO OUT)
The phono sockets for a Hi-Fi amplifier system are on the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
through the stereo amplifier system. If you press the MUTE button,
only the sound of the TV's speakers are switched off.
Amplifier
S-Video/Audio in sockets
When
connecting
picture quality will
1.
S-VIDEOL/MN
2.
AUDIO
R
AV3
3.
4.
(S-AV)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket on the front or side panel of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets on the side panel of the set.
Select AV 3 by pressing the TV/AV button repeatedly.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
S-VIDEO VCR
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
Headphone
socket
Insert the headphone plug into the headphone socket of the set.
You can listen to the sound through the headphones. To adjust the
headphone volume, press the Φ / Γ button on the §Volume pulldown menu. See the 'Sound adjustment' section.
S-VIDEOL/MN
CH.
AUDIO
R
SSM
{
Balance
{
AVL
{
§Volume
{
}{O OKOI
AV
D300(irI)
AV3
IIIOMENUOTV
If you press the MUTE button, only the sound from the TV's speakers
switched off.
When a programme is received in dual language, you can select
a language (DUAL I, DUAL II or DUAL I+II) for the sound from
the headphone regardless of that from the TV's speakers. On
the §Volume pull-down menu, press the I/II button to select
the desired language; I, II or I II.
At this time if the set is in AV mode, the I/II button selects output
are
sound;LR,LLorRR,inturn.
26
Troubleshooting check list
Symptoms
No
picture,
sound
no
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
Check aerial
(weak signal)
(plugged
Check aerial (broken
into
TV?)
lead?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
27
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
All
faulty components which fail due to defective manufacture will be replaced
charge for a period of 12 months from the original date of purchase.
2.
The dealer
free of
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifications
C.
are
made to the apparatus,
or
if
non
standard components
are
used
or
if the
serial number of the apparatus is removed, defaced, misused, or altered.
Any claims made under guarantee must be directed to the dealer from whom the
was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
become exhausted or worn in use.
equipment
D.
E.
Aerial
alignment
and
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration Card:
It is
helpful
to
complete
at least your name,
address, phone, model & serial numbers
and return it. This will enable LG to assist
you
in
receipt,
the future should you
your units be stolen,
lose your
should
or
modifications be necessary.
To obtain information
or
assistance:
Call
0870
607
5544
Monday-Friday
9.00am-4.30pm.
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF

advertising