LG | RZ-15LA32 | LG RZ-15LA32 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0381D
(ML024A, 082R TX)
(3840VA0024A/B, 3840VA0016C, 373-026F)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning
Programme edit
Favourite programme
Calling the programme table
9
Setting up
Picture adjustment
Picture adjustment
14
Sound adjustment
Sound adjustment
Stereo/Dual reception / NICAM
Sound output selection
15
reception
Time setting
Clock
Off time / On time
17
Other functions
TV, AV and PC monitor modes / Auto AV
Child lock / Auto sleep / Sleep timer
Teletext (option)
Switch on/off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
20
Connection of external equipment
Aerial socket
Euro scart sockets
Audio/Video in sockets
S-Video/Audio in sockets (S-AV) (option)
Headphone socket
23
Connection of PC
Picture adjustment
PC in socket (D-Sub
25
Troubleshooting
2
18
switching
jack)
check list
27
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
a.
Open the back panel cover.
b. After connecting the power cord to the set, connect the power
cord to an AC mains.
c.
Close the back panel cover.
PR
VOL
a
OKMENU
TV DEO
ONOF
c
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
Wiring (in
U.K.
PR
only)
VOL
This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 10 amp. When replacing the fuse always use a 10 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or "LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning (in
U.K.
OKMENU
TVIDEO
ON OF
b
only)
A mains
plug removed
destroyed. A mains plug
from the mains lead of this set must be
with bared wires is hazardous if inserted in
mains socket.
Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at
the distribution board.
a
Important (in
U.K.
only)
The wires in this mains lead are coloured in accordance with the following codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
The standing angle can be adjusted as shown in pictures.
Note : When you install the set to use the wall mounting bracket
(optional parts), fix it carefully so as not to drop.
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel of the set.
Only the remote
adjusted
control handset
with the buttons
supplied
will
on
operate this
the side
set.
Remote control handset
POWER
MUTE
Before you use the remote control
teries. See the next page.
1
1
2
3
4
5
6
7
8
1.
2
9
POWER
switches the set
2.
TV/AV/PC
MENU
from
or
off to
standby
or
directly
standby.
on
from
select
a
number.
MENU
selects
a menu.
SLEEP
PR
VOL
standby
NUMBER BUTTONS
switches the set
3.
4
on
0
3
handset, please install the bat-
VOL
OK
4.
Δ / Ε
(Programme Up/Down)
selects
Q.VIEW
a programme or a menu item.
switches the set on from standby.
LIST
PR
Φ / Γ (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
5
TEXT
MIX
INDEX
i
TIME
OK
REVEAL MODE
accepts your selection
M
SIZE
HOLD
5.
I/II
or
displays
the current mode.
UPDATE
PSM
Q.VIEW
returns to the
6
selects
a
previously
viewed programme.
favourite programme.
7
6.
I/II
selects the
language during dual language
output (option).
selects the sound
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV/PC
selects
TV, AV
clears the
or
menu
switches the set
PC monitor mode.
from the
on
from
screen.
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
1
2
3
4
5
6
7
8
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
Note
:
are
details,
In teletext
(option)
used for teletext.
see
0
the 'Teletext' section.
mode, the SLEEP, LIST and Q.VIEW buttons
9
10
are
SLEEP
PR
used for teletext function.
VOL
Battery
9
TV/AV/PC
MENU
Q.VIEW
installation
VOL
OK
LIST
PR
11
The remote control handset is
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
TEXT
MIX
INDEX
i
TIME
M
SIZE
HOLD
I/II
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
12
REVEAL MODE
-
UPDATE
PSM
the
the remote control handset for
an
5
Location and function of controls
Side
panel
PR
6
VOL
5
OK
4
MENUTV/APC
3
Back
panel
2
H/P
AV2
S-VIDEO
VIDEO
(MONO)
L
AUDIO
R
7
8
ON/OF
1
9
1.
POWER
(ON/OFF)
switches the set
7.
on
from
standby
or
off to
even
TV/AV/PC
selects
TV, AV
clears the
(r)
mode.
or
menu
switches the set
PC monitor mode.
from the
on
from
on.
when the power
is off.
2.
standby
illuminates green when the set is switched
Power line lives
:
POWER/STANDBY INDICATOR
illuminates red in
standby.
Note
10
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
Connect the
headphone plug
to this socket.
screen.
standby.
10. AUDIO/VIDEO IN SOCKETS
(AV2)
Connect the audio/video out sockets of exter3.
MENU
nal
selects
equipment
to these sockets.
a menu.
S-VIDEO/AUDIO IN SOCKETS
4.
OK
Connect the video out socket of
accepts your selection
or
displays
the current
mode.
(SAV)
an
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
5.
6.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
6
S-VIDEO
VCR to the S-VIDEO socket.
as
in AV2.
Basic
operation
On and off
1.
Press the
switch it
POWER,
on
Δ
/ Ε, TV/AV/PC
or
NUMBER buttons to
fully.
2.
Press the POWER button. The set reverts to
3.
Pull out mains
plugs
standby
mode.
to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme selection
You
can
select
POWER
programme number with the Δ / Ε
a
or
buttons.
Volume
adjustment
Press the Φ / Γ button to
adjust
MUTE
NUMBER
the volume.
1
2
3
4
5
6
7
8
MENU
0
Quick view
Press the Q.VIEW button to view the last programme you
were
watching.
Note
:
9
TV/AV/PC
PR
This function works
only
when Favourite programme is
VOL
OK
VOL
set to Off. Otherwise each press of this button will select a stored
favourite programme.
Q.VIEW
PR
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
Φ /
Γ,
I/II button.
Auto Demonstration
To review all the
ton of the side
I/II
programmed in the set, press the OK butcontrols for about 10 seconds. To stop auto
menus
panel
demonstration, press any button of the side panel controls
or
the
POWER button of the remote control.
On
The
screen
language selection (option)
be displayed on the
guage. First select your language.
menu
can
screen
1.
Press the MENU button to select the
2.
Press the Δ / Ε button to select
Press the OK button.
3.
4.
5.
in your desired lan-
Special menu.
Language.
Press the Δ / Ε button to select your desired
Press the OK button.
language.
All the
6.
on screen displays will appear in the selected language.
Press the TV/AV/PC button to return to normal TV viewing.
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
On some models, the Language will not be display.
1.
2.
Repeatedly
AutoOprogramme
ManualOprogramme
System
StorageOfrom
()OOKOMENU
()O}{OMENU
ProgrammeOedit
FavouriteOprogramme
BG
1
Start
MENU
Station
PR
VOL
OK
VOL
menu
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Storage
System
Channel
V
{{{
Search
Name
PR
()O}{OOKOMENU
1
BG
1
UHF
Fine
CO01
()O}{O0- 9OOKOMENU
Picture
Equalizer
Balance
AVL
menu
0
Off
00O CO 1DOO 05O SO 69
01O CO 03 O06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
Move
()OOKOMENU
Copy
Skip
()O}{OOKOMENU
Sound
menu
Off
Clock
-i-i:i-i-AM
-i-i:i-i-AM
Off
-i-i:i-i-AM
Pr.
1
VOL. 30
Off
OffOtime
OnOtime
()O}{OOKOMENU
Input
AutoOsleep
Language
-
-
-
-
-
-
-
-
-
--
-
-
-
--
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
()O}{OOKOMENU
Time
ChildOlock
-
menu
TV
Off
Off
Flat
Music
Movie
Speech
User
0.1O0.5O1.5O5.0O10OKHz
()O}{OMENU
Special
TV programme
8
()OMENU
menu
or
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε
grammed.
or NUMBER buttons to scan the stations you have proStations can be tuned using automatic or manual modes.
Auto programme
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
()OOKOMENU
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
System
StorageOfrom
BG
1
1
2
3
4
5
6
7
8
Start
()O}{O MENU
4.
5.
6.
7.
8.
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
L
: SECAM L/L' (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Start.
Press the OK button to begin auto programming.
System
StorageOfrom
Start
1
9
TV/AV/PC
MENU
0
PR
VOL
OK
VOL
PR
BG
1
CO15
2%
MENU
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV/PC button to return to normal TV
viewing.
9
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
()OOKOMENU
TV stations
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Manual programme.
Press the OK button to display the Manual programme
Repeatedly
menu.
Storage
System
Channel
V
UHF
Fine
Search
Name
1
2
3
4
5
6
7
8
9
1
BG
1
{{{
CO01
()O}{O0- 9OOKOMENU
4.
MENU
5.
TV/AV/PC
0
with
6.
7.
8.
PR
VOL
OK
PR
Press the Δ / Ε button to select Storage.
Select the desired programme number (0 to 99) with the Φ / Γ
button or NUMBER buttons. Any number under 10 is entered
a numeric '0' in front of
Press the OK button.
Press the Δ / Ε button to select System.
a TV system with the Φ / Γ button
Select
down menu;
L
: SECAM L/L'
VOL
it, i.e. '05' for
5.
on
the
System pull-
(France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
9.
Press the OK button.
10. Press the Δ / Ε button to select Channel.
11. Press the Φ / Γ button to select V/UHF or Cable
12.
13.
14.
15.
on
Storage
System
Channel
Fine
Search
Name
V
UHF
1
BG
1
{{{
CO01
Stored
16. To store another
station, repeat steps
4 to 15.
17. Press the TV/AV/PC button to return to normal TV
10
the
Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK button.
Press the Δ / Ε button to select Search.
Press the Φ / Γ button to commence searching on the Search
pull-down menu. If a station is found the search will stop.
Press the OK button to store it. The display Stored will appear.
viewing.
TV stations
Setting up
station name
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Name.
Assigning
1.
Repeat
2.
3.
4.
5.
6.
a
Press the Γ button and then Δ / Ε button to use a blank, +, -,
alphabet A to Z.
pressing the Φ / Γ button and then
Fine
()OOKOMENU
on.
viewing.
tuning
Normally
fine
tuning
is
only
necessary if
reception
2.
the 'Manual programme tuning'
Press the Δ / Ε button to select Fine.
3.
Press the Φ / Γ
1.
ProgrammeOedit
FavouriteOprogramme
the numeric 0 to 9 and the
Select the next position by
make your choice of the second character, and so
Press the OK button.
Press the TV/AV/PC button to return to normal TV
Station
Menu
AutoOprogramme
ManualOprogramme
Repeat
steps
is poor.
1
2
3
4
5
6
7
8
1 to 3.
button to fine tune for the best
picture
and
sound.
MENU
Storage
System
Channel
V
0
1
BG
1
UHF
Fine
Search
Name
9
TV/AV/PC
{{{
CO01
PR
()O}{OOKOMENU
VOL
4.
5.
OK
VOL
Press the OK button.
Press the TV/AV/PC button to return to normal TV
The
ber
finely tuned programme will be
during programme selection.
indicated
by
a
viewing.
yellow num-
PR
11
Setting up
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
FavouriteOprogramme
TV stations
Programme edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
()OOKOMENU
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
00-
---
-
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Delete
Move
Copy
Skip
()O}{O OKOMENU
1
2
3
4
5
6
7
8
9
Deleting
1.
2.
TV/AV/PC
MENU
0
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
00-
---
-
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
PR
Delete
VOL
OK
VOL
MENU
PR
Copying
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/ Γ button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
00-
---
again
-
to release this function.
O05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
Move0Off
()O}{O MENU
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV/PC button to return to normal TV
12
viewing.
Setting up
TV stations
Favourite programme
1.
2.
3.
Station
Menu
AutoOprogramme
ManualOprogramme
This function lets you select your favourite programmes
directly.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Favourite programme.
Press the OK button to display the Favourite programme
ProgrammeOedit
FavouriteOprogramme
Repeatedly
()OOKOMENU
menu.
Off
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
--
-
-
-
-
-
--
-
-
-
-
-
--
()O}{OOKOMENU
4.
5.
6.
7.
8.
Press the Φ / Γ button to select On or Off.
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 5 programmes.
Press the TV/AV/PC button to return to normal TV viewing.
--
Repeatedly
1
2
3
4
5
6
7
8
MENU
9
TV/AV/PC
0
press the Q.VIEW button to select stored favourite pro-
grammes.
PR
Calling the programme table
VOL
You can check the programmes stored in the memory
the programme table.
OK
VOL
by displaying
Q.VIEW
PR
LIST
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
00-
-
-
-
-
OO05O SO 69
01O CO 03OO 06O SO 17
02O CO 12OO 07O SO 22
03O SO 66OO 08O CO 09
04O SO 67OO 09O CO 11
()O}{O OKOMENU
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the Δ / Ε
or
Φ / Γ button
repeatedly
turns the pages.
Press the TV/AV/PC button to return to normal TV
viewing.
13
Picture
Picture
Menu
Contrast
100
95
85
80
Brightness
Colour
Sharpness
Picture
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer.
and tint
()O}{OOKOMENU
1.
2.
3.
press the MENU button to select the Picture menu.
Press the Δ / Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments.
Repeatedly
Contrast
Brightness
Colour
Sharpness
4.
85
95
85
80
Press the OK button to store it for the
picture User.
Press the TV/AV/PC button to return to normal TV
MENU
TV/AV/PC
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The
picture Dynamic, Standard, Mild and Game are
programmed for optimum picture reproduction at the factory and
cannot be changed.
PR
VOL
VOL
OK
PR
PSM
14
viewing.
Sound
Sound
You
adjustment
adjustment
Equalizer
Balance
AVL
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
Sound
Menu
0
Off
can
Speech
equal
1.
2.
3.
volume level
even
if you
change
()OOKOMENU
programmes.
press the MENU button to select the Sound menu.
Press the Δ / Ε button to select the desired sound item;
Equalizer, Balance or AVL.
Press the Φ / Γ button to make desired adjustment.
Repeatedly
Press the OK button in
Equalizer
to set the
Equalizer User.
Flat
Music
Movie
Speech
User
0.1O0.5O1.5O5.0O10OKHz
()OMENU
MENU
Press the Δ / Ε button to select your
Music, Movie, Speech or User.
To set the Equalizer User,
a.
preferred setting
;
TV/AV/PC
Flat,
Select User by pressing the Δ / Ε button.
a sound band by pressing the Φ / Γ button.
PR
b. Select
Select appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
c.
The
display Stored
viewing.
The sound
programmed for
changed.
Flat, Music, Movie and Speech
sound
reproduction
at the
factory
OK
VOL
PR
appears.
Press the TV/AV/PC button to return to normal TV
good
VOL
are
and cannot be
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
I/II
3.
When
NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Time
setting
Clock
Clock
OffOtime
You must set the time
1.
2.
3.
correctly
before
using
on/off time function.
press the MENU button to select the Time menu.
Press the Δ / Ε button to select Clock.
Press the Γ button and then press the Φ / Γ button to select
the desired timer item (hour, minutes).
Repeatedly
4.
Make desired
5.
timer item.
Press the OK button.
6.
Press the TV/AV/PC button to return to normal TV
adjustment
with the Δ / Ε button
OnOtime
Time
Menu
-i-i:i-i-AM
-i-i:i-i-AM
Off
-i-i:i-i-AM
Pr.
1
VOL. 30
Off
()O}{OOKOMENU
the desired
on
viewing.
Off time
The off timer
automatically
switches the set to
standby
at the pre-
set time.
1.
2.
3.
press the MENU button to select the Time menu.
Press the Δ / Ε button to select Off time.
Press the Γ button and then press the Φ / Γ button to select
Repeatedly
MENU
TV/AV/PC
the desired timer item
4.
Make desired
(hour, minutes).
adjustment with the Δ /
Ε button on the desired
PR
timer item.
6.
Press the Γ button and then Δ / Ε button to select On
Press the OK button.
7.
Press the TV/AV/PC button to return to normal TV
5.
or
Off.
viewing.
VOL
OK
VOL
PR
On time
The
on
timer
automatically
switches
on
at the
preset time with
desired programme number and volume.
1.
2.
3.
press the MENU button to select the Time menu.
Press the Δ / Ε button to select On time.
Press the Γ button and then press the Φ / Γ button to select
Repeatedly
the desired timer
4.
Make desired
item;
Pr. or VOL..
with the Δ / Ε button
--:--,
adjustment
on
the desired
timer item.
5.
6.
7.
Press the Γ button and then Δ / Ε button to select On or Off.
Press the OK button.
Press the TV/AV/PC button to return to normal TV viewing.
Note :
In the event of power interruption (disconnection or power failure), the clock must be reset.
b. Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
c.
Once the on or off time is set, these functions operate daily at
the preset time.
a.
17
Other functions
Special
TV
Off
Off
Input
Menu
ChildOlock
AutoOsleep
Language
TV, AV and PC monitor modes
Inputs
when
be set for TV, AV or PC monitor mode. AV mode is used
video cassette recorder (VCR), or other equipment is con-
can
a
nected to the set.
()O}{OMENU
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
3.
1
2
4
5
3
6
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Input.
Press the Φ / Γ button to select TV, AV1, AV2, SAV or PC.
The three AV and PC monitor modes are :
Repeatedly
AV1
:
VCR connected to the Euro scart socket of the set
AV2
SAV
:
:
VCR connected to the AV 2 of the set
S-VIDEO VCR connected to the S-VIDEO sockets of the set
PC
:
PERSONAL COMPUTER connected to the PC socket of
the set
7
8
MENU
9
4.
TV/AV/PC
0
Repeatedly
viewing.
press the TV/AV/PC button to return to normal TV
Alternatively you can select the
TV/AV/PC button.
In AV
PR
mode,
to return to TV
TV, AV
or
PC mode
mode, press the
by pressing
the
Δ / Ε or NUMBER but-
tons.
VOL
VOL
PR
Auto AV
switching
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV 1 mode automatically.
But if you want to keep on watching in TV mode, press the Δ / Ε
or
NUMBER buttons. Press the TV/AV/PC button to return to AV
modes.
Child lock
The TV
can
be set
so
control it. This feature
that the remote control handset is needed to
can
be used to
prevent unauthorized viewing.
3.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the remote control handset to select On.
4.
Press the TV/AV/PC button to return to normal TV
1.
2.
Repeatedly
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the side panel is pressed while viewing the TV.
Note : The display Child lock on will not appears on the screen if
any button on the side panel is pressed while displaying the menus.
18
Other functions
Auto
sleep
broadcasting.
1.
2.
3.
4.
Special
TV
Off
Off
Input
ChildOlock
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
AutoOsleep
Language
Menu
()O}{OMENU
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV/PC button to return to normal TV viewing.
Repeatedly
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time has elapsed.
Press the SLEEP button to select the number of minutes. The dis-
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
MENU
TV/AV/PC
of minutes selected.
Note
a.
:
To view the
remaining sleep time,
press the SLEEP button
PR
SLEEP
once.
b.
c.
To cancel the
sleep time, repeatedly press the SLEEP button
until the display
0 appears.
In the event of power interruption (disconnection or power failure), the set releases the preset sleep time.
VOL
VOL
PR
19
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
a
set
free service broadcast by most TV stations which gives
information on news, weather, television pro-
up-to-the-minute
grammes, share
prices
and many other
topics.
The teletext decoder of this TV
FASTEXT
can support the SIMPLE, TOP and
systems. SIMPLE (standard teletext) consists of a num-
ber of pages which are selected by directly entering the correpage number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
sponding
1
2
3
Switch on/off
4
5
6
7
8
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV/PC button to switch off teletext. The previous mode reappears.
9
TV/AV/PC
0
PR
SIMPLE text
OK
Page selection
PR
1.
TEXT
MODE
2.
M
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the
lowing
preceding
or
fol-
page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
M
button to switch to LIST mode.
Programming
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
buttons, select the page you wish to programme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
3.
4.
20
Using
a
coloured button.
the NUMBER
Teletext
TOP text
The
(option)
(option)
guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
user
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with auto3.
4.
matic overflow to the next block.
With the green button you can
proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
The red button permits to return to previous selection.
Alternatively the Ε button can be used.
1
2
3
Direct page selection
4
5
6
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
7
8
9
TOP mode.
0
FASTEXT mode
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
2.
Press the
You
can
button to select the index page.
select the pages which are colour coded
i
tom line with the
3.
4.
same
Corresponding to the SIMPLE
page by entering its three digit
teletext
the botINDEX
mode, you
can
select
a
i
page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the
lowing
along
coloured buttons.
preceding
or
fol-
page.
21
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
1
2
3
4
5
6
7
8
9
page.
Press this button
to return to the normal
display.
UPDATE
Displays the
0
again
half of the page.
the bottom half of the
TV
picture
on
the
screen
teletext page. The display
corner of the screen. When the
while
waiting
for the
new
will appear at the top left hand
updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
TIME
SIZE
the automatic page
PR
text page consists of 2
MIX
stop symbol is displayed
REVEAL
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
HOLD UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
22
again
to exit this function.
RED/GREEN,
Δ
/ Ε
or
Connection of external
You
connect additional
can
etc. to your set.
Examples
equipment,
are
such
as
equipment
VCRs, camcorders
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket of
2.
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
4.
5.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button
on
VCR
the VCR.
Euro scart socket
1.
Connect the Euro scart socket of the VCR to the Euro scart
2.
socket of the set.
Press the PLAY button
on
the VCR.
If your VCR outputs an AV switching voltage when connected to
the Euro scart socket, the set will switch to AV 1 mode autoBut if you want to keep on
press the Δ / Ε or NUMBER buttons.
matically.
watching
in TV
mode,
VCR
Otherwise press the TV/AV/PC button on the remote control
handset to select AV1. The VCR playback picture appears on
the
You
screen.
can
also record programmes received
by
the TV
on
video
tape.
Note
:
Use the Euro scart cable socket
connect it to the set
length
is 5.5cm under to
correctly.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV/PC button to select AV2.
Press the PLAY button
The VCR
on
playback picture
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
VCR
23
Connection of external
equipment
S-Video/Audio in sockets
When
connecting
picture quality will
1.
an
(S-AV) (option)
S-VIDEO VCR to the S-VIDEO
be further
socket, the
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
S-VIDEO VCR
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
4.
Select SAV by pressing the TV/AV/PC button
Press the PLAY button on the VCR.
The VCR
playback picture
Headphone
appears
on
the
repeatedly.
screen.
socket
Insert the
headphone plug to the headphone socket of the set. You
through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the MUTE button, the sound from the headphone and TV's
speaker are switched off.
can
24
listen to the sound
Connection of PC
Picture
You
can
adjustment
adjust picture contrast, brightness,
tion, clock, clock phase, auto-configure and
1.
Repeatedly
horizontal/vertical
reset
as
you
posiprefer.
press the TV/AV/PC button to select the PC moni-
tor mode.
2.
Press the MENU button to select the Picture
menu.
PC
80
60
0
0
40
13
Input
Contrast
Brightness
H-Position
V-Position
Clock
ClockOOphase
Auto-configure
Reset
()O}{OOKOMENU
3.
4.
Press the Δ / Ε button to select the desired
Press the Φ / Γ button to make appropriate
H-Position / V-Position
This function is to adjust
picture item.
adjustments.
MENU
MENU
picture
to
left/right
and
up/down
as
TV/AV/PC
you
prefer.
Clock
PR
This function is to minimize any vertical bars or stripes visible on
the screen background. And the horizontal screen size will also
change.
VOL
VOL
OK
PR
Clock Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and clock phase. The displayed image will disappear
for
a
few seconds while the
Some
from
Auto-configuration
PSM
graphics boards may not funcunsatisfactory, adjust your moni-
Note
signal
tion properly. If the results are
tor's position, clock and clock phase
:
is in progress.
some
manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
Press the OK button to store it for the PC monitor
picture.
The
6.
display Stored appears.
Repeatedly press the TV/AV/PC
viewing.
button to return to normal TV
25
Connection of PC
PC in socket
(D-Sub jack)
1.
Connect the
2.
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND sock-
signal
cable from the monitor
output socket of the
ets of the set.
3.
4.
PERSONAL COMPUTER
Press the TV/AV/PC button to select PC.
Switch on the PC, and the PC screen appears
The set
Note
block
:
can
be
If you have
operated
cable and
on
the set.
the PC monitor.
Apple macintosh, connect the VGA desktop
row 15 pin to 2 row 15 pin with the
connect the VGA desktop block to the Macintosh.
an
(not supplied)
signal
as
from the 3
Displayable Monitor Specification
MODE
Resolution
Horizontal
Frequency(KHz)
VGA
SVGA
(MAC)
XGA
Vertical
Frequency(Hz)
640x400
37.9KHz
85Hz
640x480
31.5KHz
60Hz
640x480
35.0KHz
67Hz
640x480
37.9KHz
72Hz
640x480
37.5KHz
75Hz
640x480
43.3KHz
85Hz
800x600
35.2KHz
56Hz
800x600
37.9KHz
60Hz
800x600
48.1KHz
72Hz
800x600
46.9KHz
75Hz
800x600
53.7KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.4KHz
60Hz
1024x768
56.5KHz
70Hz
1024x768
60.2KHz
75Hz
(Synchronization input
form
:
separate)
Note :
a.
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used
under the other resolutions, some scaled or processed pictures
may appear on the screen. The set has been pre-adjusted to
the mode VESA 1,024x 768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green
or Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may incur some afterimages.
e.
When the PC screen appears on the set, some message may
appear on the screen, the message is different depending on
Window system version (Win98, 2000). If message appears,
click the "Next" continuously until message clears.
f.
If the message "out of Range" appears on the screen, adjust
the PC as in the 'Displayable Monitor Specification' section.
DPM (Display Power Management) mode
When the PC is in the power saving mode, automatically the
itor goes into DPM mode to save the energy.
26
mon-
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
Signal
Cable connected
or
loose
27
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
All
faulty components which fail due to defective manufacture will be replaced
charge for a period of 12 months from the original date of purchase.
2.
The dealer
free of
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifications
apparatus, or if non standard components are used or if the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the
are
made to the
serial number of the
D.
equipment was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
E.
Aerial
become exhausted
This
alignment
guarantee
or worn
and
in
use.
consumer
control
does not affect your
adjustments
are
not covered
by this guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card:
It is
helpful
to
complete
address, phone, model
at least your name,
& serial numbers
and return it. This will enable LG to assist
should you
your units be stolen,
modifications be necessary.
you
in
the future
receipt,
To obtain information
or
assistance:
Call
0870
607
5544
lose your
should
or
Monday-Friday
9.00am-4.30pm.
Service website:
http://lgelectronics.co.uk
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF

advertising