LG | RE-15LA30 | LG RE-15LA30 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0294D
(MF004A, 044L TX)
(3840VA0024A/B, 3840VA0016A, 373-026F)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Side panel
4
Basic operation
On and off / Programme selection
7
Volume
adjustment
/ Quick view
Mute function / Auto Demonstration
On screen language selection (option)
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
9
Setting up
Fine
Tuning
Programme edit
Calling the programme
table
Picture adjustment
Picture adjustment
14
Sound
15
adjustment
adjustment
Stereo/Dual reception
Sound
Sound
/ NICAM
reception
output selection
Other functions
TV, AV and PC monitor modes / Auto AV
Child lock / Auto sleep / Sleep timer
Teletext (option)
Switch on / off
SIMPLE text
TOP text (option)
FASTEXT mode
Special teletext functions
19
Connection of external equipment
Aerial socket
Euro scart sockets
Audio/Video in sockets
S-video/Audio in sockets (S-AV) (option)
Headphone socket
22
Connection of PC
Picture adjustment
24
PC in socket
(D-Sub jack)
Troubleshooting
2
17
switching
check list
26
Installation
Power
This set operates on a DC supply provided by the AC-DC adaptor, the
voltage is as indicated on the label on the back cover. Use only the
AC-DC adaptor supplied with the set and never apply an AC mains to
the set directly. The AC-DC adaptor operates on an AC mains supply,
the voltage is as indicated on the label of the AC-DC adaptor.
a.
Open the back panel cover.
b. Connect the DC plug of the AC-DC adaptor to the 12V socket of
the set.
c.
Connect the AC-DC adaptor and it's power cord.
d. Connect the power cord to an AC mains.
e.
Close the back panel cover.
In the event of thunderstorms or powercuts, please pull out the mains
plug of the AC-DC adaptor and the aerial plug. Do not allow anything
to rest upon or roll over the power cord, and do not place the set
where the power cord is subject to damage.
a
PR
VOL
OKMENU
TV DEO
ON F
PR
VOL
OKMENU
Warning
TV DEO
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
ONOF
permanently.
Wiring (in
c
U.K.
only)
This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 10 amp. When replacing the fuse always use a 10 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or "LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning (in
U.K.
b
d
only)
A mains
plug removed
destroyed. A mains plug
from the mains lead of this set must be
with bared wires is hazardous if inserted in
mains socket.
Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at
the distribution board.
a
Important (in
U.K.
only)
The wires in this mains lead are coloured in accordance with the following codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This standing angle can be adjusted as shown in pictures.
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
3
Location and function of controls
All the functions
can
be controlled with the remote control handset.
Some functions
can
also be
panel
adjusted
with the buttons
on
the front
of the set.
Remote control handset
POWER
MUTE
1
1
2
3
Before you use the remote control
teries. See the next page.
1.
POWER
switches the set
2
4
5
6
7
8
9
2.
0
3
from
standby
or
off to
standby
or
directly
standby.
NUMBER BUTTONS
switches the set
3.
on
from
select
a
number.
MENU
selects
4.
MIX
Ε
(Programme Up/Down)
Φ / Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
5
TEXT
/
a programme or a menu item.
switches the set on from standby.
LIST
PR
Δ
selects
VOL
OK
Q.VIEW
a menu.
SLEEP
PR
VOL
OK
INDEX
i
TIME
on
TV/AV/PC
MENU
4
handset, please install the bat-
accepts your selection
REVEAL MODE
or
displays
the current mode.
M
SIZE
HOLD
UPDATE
5.
Q.VIEW
returns to the
I/II
previously
viewed programme.
PSM
6
6.
I/II
selects the
7
language during dual language
output (option).
selects the sound
7.
PSM
(Picture Status Memory)
preferred picture setting.
recalls your
4
broadcast.
Location and function of controls
8.
MUTE
switches the sound
9.
off.
on or
TV/AV/PC
selects
TV, AV
clears the
or
menu
switches the set
PC monitor mode.
from the
on
from
screen.
standby.
POWER
MUTE
10. SLEEP
sets the
8
sleep
timer.
11. LIST
displays
the programme table.
12. TELETEXT BUTTONS
These buttons
For further
Note
:
are
details,
In teletext
(option)
used for teletext.
see
1
2
3
4
5
6
7
8
0
the 'Teletext' section.
mode, the SLEEP, LIST and Q.VIEW buttons
9
10
are
SLEEP
PR
used for teletext function.
VOL
Battery
9
TV/AV/PC
MENU
Q.VIEW
installation
VOL
OK
LIST
PR
11
The remote control handset is
powered by two AAA type batteries.
batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
To load the
TEXT
MIX
INDEX
i
TIME
M
SIZE
HOLD UPDATE
I/II
Note
:
To avoid
damage
from
batteries if you do not plan to
extended period of time.
possible battery leakage,
use
remove
12
REVEAL MODE
-
PSM
the
the remote control handset for
an
5
Location and function of controls
Side
panel
RE/RL-15LA30 series
7
PR
6
VOL
5
OK
4
MENUTV/IDO
3
ON/ F
1
Back
panel
AV2
S-VIDEO
VIDEO
2
(MONO)
L
AUDIO
R
8
1.
MAIN POWER
(ON/OFF)
switches the set
on or
7.
off.
9
10
POWER/STANDBY INDICATOR
illuminates
brightly
( )
when the set is in
standby
mode.
2.
TV/AV/PC
selects
dims when the set is switched
TV, AV
clears the
or
menu
switches the set
3.
from the
on
from
screen.
8.
REMOTE CONTROL SENSOR
9.
HEADPHONE SOCKET
standby.
MENU
Connect the
selects
headphone plug
to this socket.
a menu.
10. AUDIO/VIDEO IN SOCKETS
4.
on.
PC monitor mode.
OK
(AV2)
Connect the audio/video out sockets of exter-
accepts your selection
or
displays
the current
mode.
nal
equipment
to these sockets.
S-VIDEO/AUDIO IN SOCKETS
5.
Φ
/ Γ
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Connect the video out socket of
(SAV)
an
Connects the audio out sockets of the SVIDEO VCR to the audio sockets
6.
Δ
/
Ε
(Programme Up/Down)
selects
a programme or a menu item.
switches the set on from standby.
6
S-VIDEO
VCR to the S-VIDEO socket.
as
in AV2.
Basic
operation
On and off
1.
2.
Press the main power button to switch the set
If the set is in standby mode, press the POWER,
or
NUMBER buttons
on
on.
/ Ε, TV/AV/PC
the remote control handset to switch it on
Δ
fully.
3.
Press the POWER button
4.
The set reverts to standby mode.
Press the main power button to switch the set off.
on
the remote control handset.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You
a
can
select
programme number with the
/
Δ
Ε
or
POWER
MUTE
1
2
3
4
5
6
7
8
NUMBER
buttons.
MENU
Volume
adjustment
Press the
Φ
/
button to
Γ
9
TV/AV/PC
0
adjust
the volume.
PR
Quick view
VOL
Press the Q.VIEW button to view the last programme you
were
OK
Q.VIEW
VOL
PR
watching.
Mute function
Press the MUTE button. The sound is switched off and the
display
W appears.
You
can
cancel it
by pressing
the
MUTE,
Φ
/ Γ, I/II button.
I/II
Auto Demonstration
To review all the
programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto
demonstration, press any button of the side panel control and
POWER button of the remote control.
ton of the side
On
screen
menus
panel
language
selection
The
menu can be displayed on the
guage. First select your language.
(option)
screen
in your desired lan-
1.
Press the MENU button to select the Station
2.
3.
Press the Δ / Ε button to select
Press the OK button.
4.
Press the
5.
6.
menu.
Language.
Δ / Ε button to select your desired language.
Press the OK button.
All the on screen displays will appear in the selected language.
Press the TV/AV/PC button to return to normal TV viewing.
7
On
screen menus
The
an
also
between you and your set takes place on screen with
The buttons required for the operating steps are
dialogue
operator
menu.
displayed.
Menu selection
press the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to red.
3.
Press the Φ / Γ button to change the setting of a menu item or
OK button to display the sub menu.
Note :
a.
In the AV mode, the Station menu is not displayed.
b. In the teletext mode, menus are not displayed.
c.
On some models, the Normal/Turbo search will not display,
the Start will display in the Auto programme menu.
d.
On some models, the Language will not display.
1.
2.
Repeatedly
MENU
BG
1
System
StorageOfrom
AutoOprogramme
ManualOprogramme
NormalOsearch
TurboOsearch
ProgrammeOedit
Language
PR
()OOKOMENUO
VOL
OK
()O}{OMENUO
VOL
Station
menu
PR
Contrast
Brightness
Colour
Sharpness
100
95
85
80
System
Channel
V
{{{
Storage
()O}{OOKOMENUO
CO01
1
()O}{OOKOMENUO
Picture
menu
0OOOOARDOOOOOOOO5OOARD1
1OOZDF
OOOO6 OOZDF1
OEqualizer
OBalance
OAVL
BG
UHFO1
Fine
Search
Name
0
Off
2OOC12OOOOOOO7 OOC 12
3OOS
4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
O
OODeleteO O
Copy
OOMoveO OOOOSkip
()OOKOMENUO
()O}{OOKOMENUO
Sound
Input
ChildOlock
AutoOsleep
menu
TV
Off
Off
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()O}{OMENUO
Special
TV programme
8
()OMENUO
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this
Station
Menu
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
()OOKOMENUO
set.
1.
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the OK button to display the Auto programme menu.
Repeatedly
System
StorageOfrom
BG
1
NormalOsearch
TurboOsearch
()O}{OOMENUO
1
2
3
4
5
6
7
8
4.
5.
6.
7.
Press the Δ / Ε button to select System. Select a TV system
with the Φ / Γ button;
L
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Normal or Turbo search.
9
TV/AV/PC
MENU
0
PR
VOL
OK
VOL
PR
In some models, you can only select Start.
Note :
a.
Turbo search is further faster than Normal search and
in some models, these searches will automatically store all
receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
Press the OK button to begin auto programming.
Option:
8.
System
StorageOfrom
NormalOsearch
TurboOsearch
1
BG
1
CO15
2%
MENUO
(Normal search)
System
StorageOfrom
BG
1
NormalOsearch
TurboOsearch
CO38
1
2%
MENU
(Turbo search)
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
9.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
Press the TV/AV/PC button to return to normal TV viewing.
9
TV stations
Setting up
Station
Menu
Manual programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
()OOKOMENUO
press the MENU button to select the Station menu.
/ Ε button to select Manual programme.
Press the OK button to display the Manual programme
1.
Repeatedly
2.
Press the
3.
Δ
menu.
1
2
4
5
System
3
Channel
V
BG
UHFO1
Fine
{{{
Search
Name
6
CO01
1
Storage
()O}{OOKOMENUO
7
8
9
4.
MENU
0
Press the Δ /
with the Φ / Γ
Ε
button to select
System.
Select
a
TV
system
button;
L
PR
VOL
OK
VOL
5.
PR
6.
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number (1 to 69) directly with the
number buttons. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the
Storage.
the
Φ
/
Γ
one required, press the Δ / Ε button to select
Select the desired programme number (0 to 99) with
button or NUMBER buttons. Any number under 10 is
entered with
8.
a
numeric '0' in front of
Press the OK button to store it. The
System
Channel
Fine
Search
Name
Storage
V
it, i.e. '05' for
BG
UHFO1
{{{
CO01
1
Stored
9.
10
To store another
5.
display Stored will
station, repeat steps
4 to 8.
appear.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
3.
Press the
Δ
Press the
Γ
/ Ε button to select Name.
button. You can use a blank, +,
and the alphabet A to Z.
With the
Φ
button you
can
select in the
Station
Menu
1 to 3.
-,
the numeric 0 to 9
Language
opposite
direction.
4.
Select the next
5.
your choice of the second character, and so on.
Repeat the 'Manual programme tuning' steps 7 to 8.
position by pressing
the OK button and then take
Press the TV/AV/PC button to return to normal TV
Fine
fine
tuning
is
only
necessary if
reception
the 'Manual programme tuning'
Δ / Ε button to select Fine.
1.
Repeat
2.
Press the
steps
()OOKOMENUO
viewing.
tuning
Normally
AutoOprogramme
ManualOprogramme
ProgrammeOedit
is poor.
1 to 3.
1
2
3
4
5
6
7
8
MENU
9
TV/AV/PC
0
System
Channel
V
Fine
Search
Name
Storage
BG
UHFO1
PR
{{{
CO01
1
VOL
OK
VOL
()O}{OOKOMENUO
PR
3.
Press the
Φ
/
Γ
button to fine tune for the best
picture
and
sound.
4.
5.
the 'Manual programme tuning' steps 7 to 8.
Press the TV/AV/PC button to return to normal TV viewing.
Repeat
The
ber
finely tuned programme will be
during programme selection.
indicated
by
a
yellow
num-
11
TV stations
Setting up
Station
Menu
Programme
AutoOprogramme
ManualOprogramme
ProgrammeOedit
Language
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
()OOKOMENUO
edit
2.
3.
press the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the OK button to display the Programme edit menu.
Repeatedly
0OOOOARDOOOOOOOO5OOARD1
1 OOZDF
OOOO6 OOZDF1
2OOC12OOOOOOO7 OOC12
3OOS 4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
1
2
3
4
5
6
7
8
9
OODeleteO O
Copy
OOMoveO OOOOSkip
()O}{OOKOMENUO
TV/AV/PC
MENU
Deleting
1.
2.
0
a
Select
programme
programme to be deleted with the
Press the RED button twice.
The selected
grammes
1.
OK
are
programme is deleted,
shifted up one position.
/ Ε
or Φ
all the
/
Γ
button.
following
pro-
Copying
PR
VOL
Δ
a
VOL
2.
a programme
Select a programme to be copied with the
Press the GREEN button.
All the
following
programmes
Δ
Ε
/
shifted down
are
or Φ
/
Γ
button.
position.
one
PR
Moving
1.
2.
3.
a
programme
Select a programme to be moved with the
Press the YELLOW button.
Δ
/
Ε or Φ
/ Γ button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
0OOOOARDOOOOOOOO5OOARD1
1 OOZDF
OOOO6 OOZDF1
2OOC12OOOOOOO7 OOC12
3OOS 4OOOOOOO8 OOS 44
4OOCH_5OOOOO9 OOCH_5
OOMoveOoffO
()O}{OOMENUO
Skipping
a
Select
a
1.
programme number
programme number to be
skipped with
the
Δ
/
Ε or Φ
/ Γ
button.
2.
Press the BLUE button. The
3.
Press the
BLUE button
skipped programme turns to
again to release the skipped
programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV/PC button to return to normal TV
12
blue.
viewing.
Setting up
TV stations
the programme table
Calling
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
1.
Press the LIST button to display the Programme table
menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0OOOOARDOOOOOOOO5OOARD1
1OOZDF
OOOO6 OOZDF1
2OOC12OOOOOOO7 OOC12
3OOS
4 OOOOOOO8 OOS 44
4OOCH_5OOOOO9OOCH_5
OO
()O}{OOKOMENUO
Note
a.
:
You may find
be
b.
TV/AV/PC
blue programmes. They have been set up to
programming or in the programme edit mode.
some
skipped by
auto
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
programme with the Δ / Ε or Φ / Γ button.
Selecting
Select
a
a
Then press the OK button.
The set switches to the chosen programme number.
Paging through
There
are
a
PR
VOL
OK
PR
VOL
LIST
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
/
Ε
or Φ
/
Γ
button
repeatedly
turns the pages.
Press the TV/AV/PC button to return to normal TV
viewing.
13
Picture
Picture
Menu
Picture
Contrast
Brightness
Colour
Sharpness
100
95
85
80
()O}{OOKOMENUO
You
can
ness
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer.
and tint
press the MENU button to select the Picture menu.
/ Ε button to select the desired picture item.
Φ / Γ button to make
appropriate adjustments.
1.
Repeatedly
2.
Press the
Press the
3.
Δ
Contrast
Brightness
Colour
Sharpness
4.
Press the OK button to store it for the
The
MENU
100
95
85
80
display Stored
picture User.
appears.
TV/AV/PC
Press the TV/AV/PC button to return to normal TV
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
PR
appears. The
VOL
VOL
OK
PR
PSM
14
viewing.
picture Dynamic, Standard, Mild and Game are
programmed for optimum picture reproduction at the factory and
cannot be changed.
Sound
Sound
You
adjustment
Sound
Menu
adjustment
select your preferred sound setting; Flat, Music, Movie or
Speech and you can also adjust the sound frequency of equalizer,
balance. If you switch AVL to on, the set automatically keeps on an
equal volume level even if you change programmes.
1.
2.
3.
can
press the MENU button to select the Sound menu.
/ Ε button to select the desired sound item; Equalizer,
Balance or AVL.
Press the Φ / Γ button to make desired adjustment.
Repeatedly
Press the
OEqualizer
OBalance
OAVL
0
Off
O
()OOKOMENUO
Δ
Press the OK button in
Equalizer
to set the
Equalizer User.
FlatOOOO
Music
Movie
Speech
User
OOOOOOOO0.1O0.5O1.5O5.0O10OkHzO
()OMENUO
MENU
Press the
Δ
/
Ε
button to select your
Speech or User.
preferred setting
;
TV/AV/PC
Flat,
Music, Movie,
To set the Equalizer User,
Select User by pressing the Δ / Ε button.
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored appears.
PR
a.
Press the TV/AV/PC button to return to normal TV
The sound
good
Flat, Music, Movie and Speech
sound
reproduction
at the
factory
and
VOL
OK
VOL
PR
viewing.
programmed for
cannot be changed.
are
15
Sound
adjustment
Stereo/Dual
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
for dual language broadcast
programme is received in two languages (dual language), you
can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language selection
If
a
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
1.
I/II
2.
3.
screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
16
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Other functions
TV, AV and PC monitor modes
Inputs
when
Special
Menu
be set for TV, AV or PC monitor mode. AV mode is used
video cassette recorder (VCR), or other equipment is con-
can
a
TV
Off
Off
Input
ChildOlock
AutoOsleep
nected to the set.
()O}{OMENUO
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
press the MENU button to select the
/ Ε button to select Input.
1.
Repeatedly
2.
Press the
3.
PresstheΦ /ΓbuttontoselectTV,AV1,AV2,SAVorPC.
The three AV and PC monitor modes are :
Δ
Special
menu.
AV 1
: VCR connected to the Euro scart socket of the set
AV2:VCRconnectedtotheAV2oftheset
SAV : S-VIDEO VCR connected to the S-VIDEO sockets of the set
PC
: PERSONAL COMPUTER connected to the PC socket
of the set
1
2
3
4
5
6
7
8
MENU
To return to TV
mode, press the
you can select the
TV/AV/PC button.
Alternatively
pressing the
Δ
/ Ε
or
TV, AV
NUMBER buttons.
or
PC monitor mode
0
by
PR
VOL
Auto AV
9
TV/AV/PC
VOL
switching
PR
If your VCR outputs switching voltage when it is switched to playback with the VCR connected to the Euro scart socket. The set is
automatically switched to AV 1 mode.
watching in TV mode, press the Δ / Ε
But if you want to keep on
NUMBER buttons. Press
or
the TV/AV/PC button to return to AV modes.
Child lock
The TV
can
be set
so
control it. This feature
that the remote control handset is needed to
can
be used to
prevent unauthorized viewing.
press the MENU button to select the Special menu.
/ Ε button to select Child lock.
/ Γ button on the remote control handset to select On.
1.
Repeatedly
2.
Press the
3.
Press the
4.
Press the TV/AV/PC button to return to normal TV
Δ
Φ
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appears on the screen if
any button on the front panel is pressed while displaying the menus.
17
Other functions
Special
Auto
Menu
TV
Off
Off
Input
ChildOlock
AutoOsleep
sleep
If you select Auto sleep On the set will automatically switch itself
to standby mode approximately ten minutes after a TV station stops
broadcasting.
1.
()O}{OMENUO
2.
3.
4.
press the MENU button to select the Special menu.
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV/PC button to return to normal TV viewing.
Repeatedly
Sleep
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the
preset time elapses.
Press the SLEEP button to select the number of minutes. The disMENU
TV/AV/PC
0 will appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
PR
SLEEP
Note
a.
VOL
VOL
PR
b.
c.
:
To view the
remaining sleep time, press the SLEEP button once.
sleep time, repeatedly press the SLEEP button
until the display
0 appears.
When you switch the set off, the set releases the preset sleep
To cancel the
time.
18
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
a
set
free service broadcast by most TV stations which gives
information on news, weather, television pro-
up-to-the-minute
grammes, share
prices
and many other
topics.
The teletext decoder of this TV
FASTEXT
can support the SIMPLE, TOP and
systems. SIMPLE (standard teletext) consists of a num-
ber of pages which are selected by directly entering the correpage number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
sponding
1
2
3
4
5
6
7
8
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on
the
screen
9
TV/AV/PC
headline. The first page nimber indicates your selec-
0
tion, while the second shows the
current page displayed.
TV/AV/PC button to switch off teletext. The pre-
Press the TEXT or
vious mode reappears.
PR
OK
SIMPLE text
PR
Page selection
1.
2.
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the
lowing
TEXT
MODE
preceding
or
fol-
M
page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
2.
buttons, select the page you wish to programme.
Press the OK button. Then the selected page is stored as the
selected page number with blinking once. From now on, you
can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
3.
4.
Using
a
coloured button.
the NUMBER
19
Teletext
TOP text
The
(option)
(option)
guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
user
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with auto3.
1
2
3
4
5
6
7
8
9
4.
matic overflow to the next block.
With the green button you can
proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
0
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
PR
Page selection
1.
INDEX
2.
i
3.
4.
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
You
can
Corresponding to the SIMPLE
page by entering its three digit
20
page.
the bot-
teletext mode, you can select a
page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the
lowing
along
preceding
or
fol-
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
teletext
the TV
picture on
page. The display
of the
corner
screen.
the
screen
while
waiting
for the
1
2
3
4
5
6
7
8
9
new
0
will appear at the top left hand
When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
PR
HOLD
Stops
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
PR
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
MIX
TIME
REVEAL
screen
SIZE
HOLD UPDATE
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
TIME
When
viewing
a
the time at the
button
again
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
again
RED/GREEN,
Δ
/
Ε
or
to exit this function.
21
Connection of external
You
connect additional
can
etc. to your set.
Examples
equipment
equipment,
are
such
VCRs, camcorders
as
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket of
2.
the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
3.
VCR
4.
5.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button
on
the VCR.
Euro scart socket
1.
Connect the Euro scart socket of the VCR to the Euro scart
2.
socket of the set.
Press the PLAY button
on
the VCR.
If your VCR outputs a switching voltage and connected to a
Euro scart socket, the set will switch to AV 1 mode automatical-
ly.
/
VCR
Ε
But if you want to keep
or NUMBER buttons.
on
in TV
watching
mode, press the
Δ
Otherwise press the TV/AV/PC button on the remote control
handset to select AV 1. The VCR playback picture appears on
the
You
screen.
can
also record programmes received
by
the TV
on
video
tape.
Note
:
Use the Euro scart cable socket
connect it to the set
length
is 5.5cm under to
correctly.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV/PC button to select AV 2.
Press the PLAY button
The VCR
VCR
22
on
playback picture
the VCR.
appears
on
the
screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
Connection of external
S-Video/Audio in sockets
When
connecting
picture quality will
1.
equipment
(S-AV) (option)
an S-VIDEO VCR to the S-VIDEO
be further improved.
socket, the
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
3.
sockets of the set.
Select SAV by pressing the TV/AV/PC button
4.
Press the PLAY button
The VCR
on
playback picture
Headphone
S-VIDEO VCR
repeatedly.
the VCR.
appears
on
the
screen.
socket
Insert the
headphone plug to the headphone socket of the set. You
through the headphone and TV's speaker.
To adjust the headphone volume, press the Φ / Γ button. If you
press the MUTE button, the sound from the headphone and TV's
speaker are switched off.
can
listen to the sound
23
Connection of PC
Picture
You
can
adjustment
adjust picture contrast, brightness,
tion, clock, clock phase, auto-configure and
1.
Repeatedly
horizontal/vertical
reset
as
you
posiprefer.
press the TV/AV/PC button to select the PC moni-
tor mode.
2.
Press the MENU button to select the Picture
OInput
PC
O'
60
OΩ
90
0
O
menu.
0
O
OClock
OClockOOphase
40
16
OAuto_configure
OReset
()O}{OOKOMENUO
MENU
MENU
3.
Press the
Δ
4.
Press the
Φ
/ Ε button to select the desired
/ Γ button to make appropriate
picture item.
adjustments.
TV/AV/PC
/
(Horizontal Position/Vertical Position)
This function is to adjust picture to left/right and up/down
as
you
prefer.
PR
Clock
VOL
VOL
OK
This function is to minimize any vertical bars or stripes visible on
screen background. And the horizontal screen size will also
the
PR
change.
Clock Phase
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and clock phase. The displayed image will disappear
PSM
for
a
few seconds while the
Auto-configuration
is in process.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and clock phase manually.
Reset
This function allows you to return to the good picture reproduction programmed at the factory and cannot be changed.
5.
Press the OK button to store it for the PC monitor
picture.
The
6.
24
display Stored appears.
Repeatedly press the TV/AV/PC
viewing.
button to return to normal TV
Connection of PC
PC in socket
1.
2.
3.
4.
(D-Sub jack)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the AUDIO sockets of
the set.
Press the TV/AV/PC button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
PERSONAL COMPUTER
Note :
If you have an Apple macintosh, connect the VGA desktop
block from the 3 row 15 pin to 2 row 15 pin with the signal cable
and connect the VGA desktop block to the Macintosh.
b.
The cables are not supplied, such as the signal cable, audio
cable, VGA desktop block, etc.
a.
Displayable Monitor Specification
MODE
VGA
SVGA
(MAC)
XGA
Resolution
Horizontal
V ertical
Frequency(KHz)
Frequency(Hz)
640x480
31.5KHz
60Hz
640x480
35KHz
67Hz
640x480
37.9KHz
72Hz
640x480
37.5KHz
75Hz
640x480
43.3KHz
85Hz
720x400
31.5KHz
70Hz
800x600
35.2KHz
56Hz
800x600
37.9KHz
60Hz
800x600
48.1KHz
72Hz
800x600
46.9KHz
75Hz
800x600
53.7KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.4KHz
60Hz
1024x768
56.5KHz
70Hz
1024x768
60.2KHz
75Hz
1024x768
68.7KHz
85Hz
Note :
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. The set has been pre-adjusted to the
mode VESA 1,024x 768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may incur some afterimages.
e.
When the PC screen appears on the set, some message may
appear on the screen, the message is different depending on
Window system version (Win98, 2000). If message appears, click
the "Next" continuously until message clears.
f.
If the message "out of Range" appears on the screen, adjust
the PC as in the 'Displayable Monitor Specification' section.
a.
25
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
adjust
(VCR only)
the H/V
position
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Clock Phase
Is the
26
or
Signal
Cable connected
or
loose
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
All
faulty components which fail due to defective manufacture will be replaced
charge for a period of 12 months from the original date of purchase.
2.
The dealer
free of
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifications
apparatus, or if non standard components are used or if the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the
are
made to the
serial number of the
D.
equipment was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
E.
Aerial
become exhausted
This
alignment
guarantee
or worn
and
in
use.
consumer
control
does not affect your
adjustments
are
not covered
this
by
guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card:
It is
helpful
to
complete
address, phone, model
at least your name,
& serial numbers
and return it. This will enable LG to assist
should you
your units be stolen,
modifications be necessary.
you
in the future
receipt,
To obtain information
or
assistance:
Call
0870
607
5544
lose your
should
or
Monday-Friday
9.00am-4.30pm.
Service website:
http://lgelectronics.co.uk
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF

advertising