LG | RE-44SZ20RD | LG RE-44SZ20RD Owner’s Manual

DLP
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
information to your dealer when you
Model number
:
Serial number
:
and quote this
require service.
cover
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0362D
(MB02JA,
084U
TX)
(3840VA0024A/B, 3840VA0016C, 373-026F)
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Rear panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
SETUP menu
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Calling the programme table
10
PICTURE
15
menu
PSM(Picture Status Memory)
Picture adjustment
AUDIO menu
SSM (Sound Status Memory) / Balance adjustment
AVL (Auto Volume Leveler) / Equalizer (option)
Sound output selection / Stereo/Dual reception
NICAM reception
16
TIME
20
menu
Auto
Sleep
/
Sleep
timer
SPECIAL menu
Main Picture Source Selection
Auto AV switching
PIP Picture Source Selection
Child lock / Picture format
21
Picture in picture (PIP) function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Program selection for sub picture / Sub picture size
Sub picture freeze / Sub picture position change
24
Twin
25
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT
Special teletext functions
26
Connection of external equipment
Aerial socket / Euro scart sockets
Audio/Video in sockets / Audio out sockets
S-Video/Audio in sockets
29
picture function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Program selection for sub picture
Troubleshooting
2
check list
(AUDIO OUT)
Back
cover
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
Wiring (in
or
shock
U.K.
hazard, do
not expose the set to
rain
or
only)
This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or "LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning (in
U.K.
only)
A mains
plug removed from the mains lead of this set must be
destroyed. A mains plug with bared wires is hazardous if inserted in
a mains socket.
Do not connect either wire to the earth pin, marked with the letter E
with the earth symbol
or coloured green or green and yellow.
or
If any other plug is fitted,
the distribution board.
Important (in
U.K.
use a
5 amp
fuse, either in the plug,
or
at
only)
The wires in this mains lead are coloured in accordance with the following codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid having a fixed image remaining on the screen for a long period of time. Typically a frozen still picture from a VCR or DVD, 4:3,
14:9 or 16:9 picture format or if a CH label is present the fixed
image may remain visible on the screen.
Manufactured under license from Dolby Laboratories. "Dolby",
"Pro Logic" and the double-D symbol are trademarks of Dolby
Laboratories.
3
Location and function of controls
All the functions
Some functions
panel of the set.
can
can
be controlled with the remote control handset.
also be adjusted with the buttons on the front
Remote control handset
Before you use the remote control handset,
teries. See the next page.
POWER
1
ARC
TV/AV
MUTE
SLEEP
1.
2
3
PIP
TEXT
on
2.
ARC
3.
MUTE
switches the sound
4
PR-
POWER
switches the set
from
standby
please
off to
or
install the bat-
standby.
(Aspect Ratio Control)
changes the picture format.
PR+
SWAP
MENU
INPUT
PR
CANCEL/EXIT
5
VOL
OK
4.
VOL
PR
123
456
7
8
9
PSM
0
SSM
POSITION
SIZE
off.
PIP BUTTONS
PIP
switches the sub picture on or off.
PR +/selects a program for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
6
7
on or
5.
MENU
selects
a menu.
8
INDEX
TIME
MIX
MODE
6.
STILL
REVEAL
M
?
I/II
10
REW
(Program Up/Down)
Φ / Γ (Volume Up/Down)
adjusts the volume.
adjusts menu settings.
LIST
OK
9
STOP
Δ / Ε
selects a program or a menu item.
switches the set on from standby.
P/STILL
PLAY
accepts your selection
REC
FF
7.
or
NUMBER BUTTONS
switches the set on from
displays
standby
8.
PSM (Picture Status
recalls your preferred
9.
I/II
selects the language during dual
selects the sound output.
the current mode.
or
directly
a
number.
Memory)
picture setting.
language
10. VCR BUTTONS
control a LG video cassette recorder.
4
select
broadcast.
Location and function of controls
11. TV/AV
selects the remote operating mode.
switches the set on from standby.
12. SLEEP
sets the
sleep
timer.
POWER
13. TELETEXT BUTTONS
These buttons are used for teletext.
For further details, see the 'Teletext' section.
ARC
TV/AV
MUTE
SLEEP
11
12
14. CANCEL/EXIT
Clears all
on-screen
PIP
displays
and returns to TV
viewing
13
from any
menu.
15. SSM
TEXT
PR-
PR+
SWAP
(Sound Status Memory)
preferred sound setting.
recalls your
MENU
INPUT
PR
CANCEL/EXIT
14
16. LIST
displays
the program table.
VOL
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
Battery
OK
VOL
are
installation
PR
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
1
2
3
4
5
6
7
8
9
PSM
0
SSM
POSITION
SIZE
STILL
INDEX
TIME
REVEAL
MIX
MODE
-
15
M
?
LIST
16
I/II
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
STOP
REW
P/STILL
PLAY
REC
FF
5
Location and function of controls
Front
panel
Lamp indicator, operation indicator, and temperature indicator, located side the front panel
operating status of the DLP(Digital Light Processing) projection TV.
controls
reveal the
10
ON/OFF
AV4
R
AUDIO
L/MONO VDEO
S-VIDEO
TV/AV
MENU
OK
VOL
PR
AV4
ON/OFF
R AUDIO L/MONO VIDEO
11
S-VIDEO
TV/AV
MENU
OK
VOL
23 4 5
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
TV/AV
selects TV or AV mode.
switches the set on from
3.
4.
MENU
selects
PR
6
standby.
OK
mode.
or
displays
5.
Φ / Γ
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
6.
Δ / Ε
(Program Up/Down)
selects a program or a menu item.
switches the set on from standby.
1
7.
OPERATION INDICATOR
(Refer
8.
LAMP INDICATOR
to
9.
TEMPERATURE INDICATOR
(Refer
to
p.7)
p.7)
(Refer
to
p.7)
10. REMOTE CONTROL SENSOR
a menu.
accepts your selection
6
7 89
the current
11. AUDIO/VIDEO IN SOCKETS (AV4)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-VIDEO)
Connect the S-VIDEO out socket of an VCR
to the S-VIDEO socket.
Connect the audio out sockets of the VCR to
the audio sockets as in AV4.
faint white trace on the
to the position.
This is normal and is a characteristic of the
Note
:
There
might
be
center of the screen
screen.
a
according
Location and function of controls
Rear
panel
ANT IN
75Ω
3
L
SERIAL
AUDIO
OUT
R
1
2
ANT IN
75Ω
AERIAL SOCKET
AV3
L
AUDIO
OUT
AUDIO OUT SOCKETS
UPGRADE PORT
This
port is used
software
without
to
version
changing
Be careful not to
upgrade the
and debug
R
UPGRADE PORT
AV1
EURO SCART SOCKETS
AV2
the hardware.
use
this
Just contact your dealer
vice centre.
port.
or ser-
?Status Indicators
Operation
Lamp
Indicator
Off
Power cord is not connected.
Red
Power Cord is connected, unit is
Green
On
Orange (flashing)
Preparing operation
Indicator
the end of its life and
Projection lamp
Green
(flashing)
Orange
The
Red
The set has shut down due to
Red
The set has shut down, check the
needs to be
(flashing)
lamp
The set is
reaching
replaced
cover
standby.
standby.
Orange
Indicator
Temperature
is
in
on
with
a new
lamp.
is not closed.
overheating.
overheating.
cooling
fan.
7
Basic
Operation
On and off
1.
Before turning the set on, be sure that the main power switch
the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, Δ / Ε, TV/AV
or NUMBER button on the remote control handset to turn it on
fully. The LED will blink orange for a while and then lit up green
when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
on
2.
POWER
3.
TV/AV
MUTE
MENU
VOL
PR
OK
VOL
PR
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control
handset.
b. Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 50 to 70 seconds for sufficient cooling.
d.
When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 50 to
70 seconds for sufficient cooling.
e.
Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound
from the set.
1
2
3
4
5
6
Program
7
8
9
You
can
selection
select
a
program number with the Δ / Ε
or
NUMBER but-
tons.
0
SSM
Volume
adjustment
Press the Φ / Γ button to
adjust
the volume.
Mute function
I/II
Press the MUTE button. The sound is switched off and the
display
Mute
appears.
You can cancel it
On
screen
by pressing
language
selection
The menu can be displayed
First select your language.
1.
2.
4.
5.
the
(option)
screen
in desired
language.
/ Ε button to select the
menu.
Press the Γ button and then the Δ
/ Ε button to select
Press the Γ button and then the Δ / Ε button to select your
desired language.
Press the OK or Φ button.
All the on screen displays will appear in the selected language.
Repeatedly press the MENU button to return to normal TV
viewing.
8
on
Press the MENU button and then Δ
Special
Language.
3.
the MUTE, Φ / Γ, SSM, I/II button.
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
2.
3.
Press the MENU button and then Δ / Ε button to display each menu.
Press the Γ button and then the Δ / Ε button to select a menu item.
Repeatedly press the MENU button to return to normal TV viewing.
Note
:
On
some
models, the BG, L will display.
SETUP
Γ
Auto programme
PSM
SETUP
Manual programme
PICTURE
Programme
Contrast
PICTURE
PICTURE
edit
Γ
Brightness
Colour
AUDIO
AUDIO
AUDIO
AUDIO
TIME
TIME
SPECIAL
SPECIAL
SETUP
Sharpness
PICTURE
menu
SETUP
SSM
PICTURE
PICTURE
AVL
menu
Balance
Equalizer
AUDIO
AUDIO
Γ
TIME
SPECIAL
AUDIO
Main
SETUP
PIP
PICTURE
input
SETUP
input
Auto
sleep
Sleep
timer
menu
PICTURE
PICTURE
Child lock
Language
AUDIO
AUDIO
AUDIO
TIME
TIME
SPECIAL
Γ
Γ
SPECIAL
SPECIAL
menu
TIME
menu
9
SETUP Menu
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
edit
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use the
Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
All stations that
AUDIO
can
ommended that you
1.
TIME
2.
use
are
stored
auto programme
by this method. It is recduring installation of this set.
Press the MENU button and then Δ
SETUP
SPECIAL
SPECIAL
tuning
be received
/ Ε button to select the
menu.
Press the Γ
button and then Δ
/ Ε button to select Auto
Programme.
3.
Press the Γ button to select
System.
Select
TV
a
system with
the Δ / Ε button;
SETUP
Auto programme
Manual programme
PICTURE
Programme
edit
Γ
System
Storage
I
from
9
To Start
AUDIO
AUDIO
TIME
SPECIAL
Φ Prev.
MENU
PR
L
VOL
OK
VOL
4.
:
BG :
I
:
DK :
Press
SECAM L/L'
(France:
SECAM-L models
PAL B/G, SECAM B/G
PAL I/II (U.K./Ireland)
PAL D/K, SECAM D/K
the Γ button to select
only)
(Europe/East Europe)
(East Europe)
Storage from.
Select the
programme number with the Δ / Ε button
buttons on the Storage from menu.
Press the Γ button to select To Start.
Press the Γ button to begin auto programming.
ning
5.
6.
PR
1
2
SETUP
SETUP
3
4
5
6
7
8
9
PICTURE
Auto programme
System
Manual programme
Storage
Programme
edit
AUDIO
AUDIO
begin-
NUMBER
I
from
9
To Start
Γ
88%
Searching...
0
or
15
TIME
SPECIAL
SPECIAL
MENU
All receivable stations
stations which
are
stored. The station
Stop
name
is stored for
broadcast VPS
(Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
7.
10
Repeatedly
viewing.
Press the MENU button to return to normal TV
SETUP Menu
Manual programme
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
SETUP
Γ
Auto programme
Manual programme
PICTURE
with five characters to each programme number.
Programme
edit
AUDIO
AUDIO
1.
Press the MENU button and then Δ
SETUP
2.
/ Ε
button to select the
menu.
TIME
Press the Γ button and then Δ
/ Ε
button to select Manual
SPECIAL
Programme.
3.
Γ
Press the
button to
the Manual
display
Programme
menu.
SETUP
SETUP
Auto programme
Manual programme
PICTURE
Programme
BG
System
Cable
Band
Γ
edit
47
Channel
AUDIO
AUDIO
Search
Up/Down
Fine
Up/Down
Name
TIME
Storage
C5
10
SPECIAL
SPECIAL
Φ Prev.
4.
Press the Γ button to select
the Δ / Ε
5.
System. Select
a
TV
:
SECAM L/L'
BG
:
PAL
I
:
PAL
DK
:
PAL
VOL
(France: SECAM-L models only)
B/G, SECAM B/G (Europe/East Europe)
I/II (U.K./Ireland)
D/K, SECAM D/K (East Europe)
Press the Γ button to select Band. Press the Δ
V/UHF
or
Cable
as
/ Ε
button to
required.
/ Ε
button
or
NUMBER buttons. If
buttons.
PR
1
2
3
4
5
6
7
8
9
0
Press the Γ button to select Search. Press the Δ
commence
searching.
If this station is the
one
If
the Δ
/
/ Ε
button to
station is found the search will stop.
required, press the Φ / Γ button to select
a
Storage. Select
9.
VOL
possi-
ble, select the channel number(1 to 69) directly with the number
8.
OK
Press the Γ button to select Channel. Select the desired channel number with the Δ
7.
PR
system with
button;
L
select
6.
MENU
the desired programme number
Ε button or NUMBER buttons.
(0
to
99)
with
Press the OK button to store it.
10. To store another station, repeat steps 4 to 9.
11. Repeatedly press the MENU button to return to normal TV
viewing.
11
SETUP Menu
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
edit
Press the Δ button. You
9 and the
alphabet
can use a
blank,
+,
-,
the numeric 0 to
A to Z.
4.
With the Ε button you can select in the opposite direction.
Select the next position by pressing the Γ button and then take
5.
your choice of the second character, and
Press the OK button.
AUDIO
TIME
6.
SPECIAL
1 to 3.
Press the Γ button to select Name.
tuning
Normally
1.
2.
3.
the MENU button to return to normal TV
Repeatedly press
viewing.
Fine
so on.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the Γ button to select Fine.
Repeat
Press the Δ
/ Ε
button to fine tune for the best
picture
and
sound.
MENU
PR
SETUP
SETUP
PICTURE
VOL
OK
VOL
AUDIO
Auto programme
System
Manual programme
Band
Programme
edit
Channel
47
Search
Up/Down
Fine
Up/Down
Name
TIME
BG
Cable
Storage
BLN 2
10
PR
SPECIAL
SPECIAL
1
2
3
4
5
6
7
8
0
12
9
Φ Prev.
Store
4.
Press the OK button.
5.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be indicated by yellow number
during programme selection.
SETUP Menu
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
SETUP menu.
Press the Γ button and then Δ / Ε button to select
Programme edit.
Press the Γ button to display the Programme edit menu.
SETUP
SETUP
Γ
Auto programme
Manual programme
PICTURE
Programme
edit
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
C1
MENU
Prev.
1
0C1
1C4
2C5
3S2
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
16-----
17-----
18-----
19-----
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
28-----
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
Select
Delete
Copy
Move
Skip
Deleting a programme
1. SelectaprogrammetobedeletedwiththeΔ/ΕorΦ/Γbutton.
2.
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
all the
MENU
PR
following proVOL
OK
VOL
Copying a programme
1. SelectaprogrammetobecopiedwiththeΔ/ΕorΦ/Γbutton.
2.
Press the GREEN button.
All the following programmes
are
shifted down
one
Moving a programme
1. SelectaprogrammetobemovedwiththeΔ/ΕorΦ/Γbutton.
2.
3.
PR
position.
Press the YELLOW button.
Move the programme to the desired programme number with the
1
2
3
4
5
6
7
8
9
0
Δ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
1.
2.
3.
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
SETUP Menu
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying programme
C1
menu.
1
0C1
1C4
2C5
3S2
4C1
5C6
6C3
7C1
8C7
9C1
10C2
11-----
12-----
13-----
14-----
15-----
16-----
17-----
18-----
19-----
20-----
21-----
22-----
23-----
24-----
25-----
26-----
27-----
28-----
29-----
30-----
31-----
32-----
33-----
34-----
35-----
36-----
37-----
38-----
39-----
PR
LIST
VOL
OK
Exit
Select
VOL
Note :
a.
You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
PR
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
The set switches to the chosen programme number.
Selecting
a programme table
3 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the Δ
/ Ε or Φ / Γ
button
repeatedly
turns the pages.
LIST
Press the LIST button to return to normal TV
14
viewing.
PICTURE Menu
PSM
1.
2.
3.
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the PICTURE menu.
Press the Γ button and then Δ / Ε button to select PSM.
Press the Γ button and then Δ / Ε button to select a picture setting on the PSM pull-down menu.
SETUP
SETUP
PSM
Γ
PSM
SETUP
SETUP
Contrast
PICTURE
Γ
Brightness
Colour
AUDIO
Sharpness
Dynamic
TIME
Contrast
PICTURE
AUDIO
Standard
Brightness
Mild
Colour
Game
Sharpness
User
SPECIAL
SPECIAL
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK
Repeatedly
viewing.
Picture
You
2.
3.
button.
press the MENU button to return to normal TV
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC AV only) to the levels you prefer.
MENU
PR
can
ness
1.
or Φ
Press the MENU button
TURE menu.
Press the Γ button and
picture item.
Press the Γ button and
adjustments, then it will
button to select the PIC-
and then Δ
/ Ε
then Δ
button to select the desired
/ Ε
VOL
then Φ / Γ button to make appropriate
be stored for the picture User.
OK
VOL
PR
SETUP
SETUP
Contrast
100Φ
Γ
PICTURE
AUDIO
PSM
TIME
SPECIAL
SPECIAL
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild, Game or User)
appears. The picture Dynamic, Standard, Mild and Game are
programmed for good picture reproduction at the factory and cannot be changed.
15
AUDIO MENU
SSM
SETUP
SETUP
PICTURE
SSM
You
Balance
Standard, Music, Speech,
sound setting; Dolby Virtual,
Movie and you can also adjust the
sound frequency of equalizer, balance. If you switch AVL to on, the
set automatically keeps on an equal volume level even if you
AVL
Equalizer
AUDIO
(Sound Status Memory)
Γ
can
select your
preferred
or
change programmes.
TIME
1.
SPECIAL
2.
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select SSM.
Press the Γ button and then Δ / Ε button to select a sound setting on the SSM pull-down menu.
SSM
SETUP
SETUP
Balance
PICTURE
Γ
Dolby
Virtual
Standard
AVL
Music
Equalizer
Speech
AUDIO
Movie
User
TIME
SPECIAL
SPECIAL
Φ Prev.
MENU
VOL
PR
OK
or Φ
4.
Press the OK
5.
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
VOL
Dolby Virtual
Dolby Virtual lets you experience panoramic
To recall your preferred setting, press the SSM button until the
desired sound (Dolby Virtual, Standard, Music, Speech,
Movie or User) appears. The sound Dolby Virtual, Standard,
Music, Speech and Movie are programmed for good sound
reproduction at the factory and cannot be changed.
PR
SSM
If you press the SSM button after making appropriate adjustEqualizer sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Dolby Virtual, Standard, Music, Speech or Movie.
Note
:
ment on the
16
effects of sound.
AUDIO MENU
Balance
You
can
adjustment
adjust
balance.
SETUP
SSM
PICTURE
AVL
Balance
1.
2.
3.
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Balance.
Make desired adjustment with the Φ / Γ button on the Balance
pull-down
menu.
Equalizer
AUDIO
Γ
TIME
SETUP
SETUP
Balance
0Φ
SPECIAL
Γ
PICTURE
AUDIO
TIME
SPECIAL
SPECIAL
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
AVL
If you select AVL On, the set automatically
level even if you change programmes.
keeps
on an
equal
vol-
ume
1.
2.
3.
PR
(Auto Volume Leveler)
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select AVL.
Press the Γ button and then Δ / Ε button to select On or Off
on the AVL pull-down menu.
SETUP
SETUP
SSM
PICTURE
AVL
VOL
OK
VOL
PR
Balance
Equalizer
Γ
Off
On
AUDIO
TIME
SPECIAL
SPECIAL
Φ Prev.
4.
5.
Press the OK or Φ button.
Repeatedly press
viewing.
the MENU button to return to normal TV
17
AUDIO MENU
Equalizer (option)
1.
SSM
SETUP
SETUP
Balance
PICTURE
2.
3.
AVL
Equalizer
AUDIO
Press the MENU button and then Δ / Ε button to select the
AUDIO menu.
Press the Γ button and then Δ / Ε button to select Equalizer.
Press the Γ button in Equalizer to display the Equalizer sub
menu.
Γ
SETUP
SSM
PICTURE
AVL
TIME
Balance
SPECIAL
Equalizer
AUDIO
TIME
120 500
1.5k
5k
10k
(Hz)
SPECIAL
Φ Prev.
4.
5.
6.
7.
Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
VOL
PR
OK
Sound output selection
In AV mode, you
VOL
I/II
18
select output sound for the left and
right
loud-
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
PR
can
speakers.
AUDIO MENU
Stereo/Dual
reception
When
a programme is selected, the sound information for the station
appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
mono
selection for dual
language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
Language
NICAM
equipped
with the receiver for NICAM
NICAM
Instantaneous
high quality
Multiplex) digital
sound
NICAM
When
MONO
When
OK
VOL
PR
(Near
can
reception, the
Companding Audio
be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
2.
VOL
reception
If your set is
1.
PR
or
mono
is
received, you
can
I/II
select NICAM
FM MONO.
NICAM stereo is received, you can select NICAM
or FM MONO. If the stereo signal is weak, switch to
STEREO
FM
3.
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO.
19
TIME MENU
Auto
SETUP
SETUP
Auto
sleep
Sleep
timer
1.
PICTURE
2.
3.
AUDIO
TIME
Sleep
If there is
minutes.
no
input signal,
the set will turn off
automatically
after 10
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Auto sleep.
Press the Γ button and then Δ / Ε button to select On or Off.
Γ
SETUP
SETUP
SPECIAL
Auto
sleep
Sleep
timer
Γ
Off
On
PICTURE
AUDIO
AUDIO
TIME
SPECIAL
SPECIAL
Φ Prev.
SLEEP
4.
5.
Press the OK
Sleep
MENU
VOL
button.
the MENU button to return to normal TV
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
PR
OK
or Φ
Repeatedly press
viewing.
1.
VOL
2.
3.
4.
Press the MENU button and then Δ / Ε button to select the
Time menu.
Press the Γ button and then Δ / Ε button to select Sleep timer.
Press the Γ button and then Δ / Ε button to select a timer setting on the Sleep timer pull-down menu.
Press the OK or Φ button.
PR
SETUP
Auto
sleep
Sleep
timer
PICTURE
Off
Γ
10 min.
20 min.
30 min.
60 min.
AUDIO
AUDIO
90 min.
120min.
TIME
180 min.
240 min.
SPECIAL
Φ Prev.
5.
Repeatedly press
viewing.
the MENU button to return to normal TV
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90, 120,
180 and 240. The timer begins to count down from the number of
minutes selected.
play
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display Off appears.
c.
When you switch the set off, the set releases the preset sleep time.
20
SPECIAL MENU
Main Picture Source Selection
Inputs
be set for TV
can
cassette recorder
or
(VCR),
AV mode. AV mode is used when
or
other
equipment
a
video
is connected to the set.
1.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
2.
Press the Γ button and then Δ / Ε button to select Main
3.
Press the Γ button and then Δ / Ε button to select
AV2(Y/C),
AV2,
AV3
or
Main
SETUP
SETUP
PIP
PICTURE
input.
PIP
PICTURE
Child lock
Language
AUDIO
TIME
SPECIAL
Γ
input
input
TV, AV1,
AV4.
input
Main
SETUP
Γ
TV
AV1
input
Child lock
AV2
Language
AV2(Y/C)
AUDIO
AUDIO
TV/AV
AV3
AV4
TIME
SPECIAL
SPECIAL
Φ Prev.
AV1
:
VCR connected to the Euro scart socket 1
on
the back
AV2
:
VCR connected to the Euro scart socket 2
on
the back
AV2(Y/C)
:
VCR connected to the Euro scart socket 2
AV3
:
VCR connected to the Euro scart socket 3
AV4
:
VCR connected to the AV4 sockets of the set
Press the OK
5.
Repeatedly press
viewing.
Alternatively you
on
PR
the back
the back
VOL
OK
VOL
Φ button.
4.
or
on
MENU
can
the MENU button to return to normal TV
select the TV
or
AV mode
by pressing
TV/AV button.
In AV mode, to return to TV mode, press the Δ / Ε
tons.
or
PR
the
1
2
3
4
5
6
7
8
9
NUMBER but0
Auto AV
switching
If your VCR outputs switching voltage when switched to playback
with the VCR connected to the Euro scart socket, the set will auto-
matically
switch to AV1, AV2, AV3 mode when
an
AV
signal
is
input.
Press the TV/AV button to return to AV modes.
21
SPECIAL MENU
PIP Picture Source Selection
Main
SETUP
SETUP
PIP
PICTURE
input
input
1.
2.
Child lock
3.
4.
Language
AUDIO
Press the
Press the
SPECIAL
Press the
Press the
PIP button.
MENU button and then Δ / Ε button to select the
menu.
Γ button and then Δ / Ε button to select PIP input.
Γ button and then Δ / Ε button to select AV1, AV2,
AV2(Y/C),
AV3
or
AV4.
TIME
Main
SETUP
SETUP
SPECIAL
PIP
Γ
PICTURE
TV
input
input
Γ
AV1
Child lock
AV2
Language
AV2(Y/C)
AUDIO
AUDIO
AV3
AV4
TIME
SPECIAL
SPECIAL
Φ Prev.
5.
6.
PIP
MENU
Press the OK
or Φ
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
PR
Child lock
VOL
OK
VOL
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
PR
2.
3.
Press the MENU button and then Δ / Ε button to select the
SPECIAL menu.
Press the Γ button and then Δ / Ε button to select Child lock.
Press the Γ button and then Δ / Ε button to select On or Off.
Main
SETUP
PIP
PICTURE
input
input
Child lock
Language
Γ
Off
On
AUDIO
AUDIO
TIME
SPECIAL
Φ Prev.
4.
Repeatedly press
viewing.
the MENU button to return to normal TV
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
menus.
22
Child lock on will not appear on the screen if
the front panel is pressed while displaying the
display
on
SPECIAL MENU
Picture format
You
watch TV in various
can
16:9
picture formats;
(Wide), 14:9,
Zoom, 4:3 and Auto.
You
can
repeatedly press
the ARC button to select your desired
pic-
ture format.
16:9
ARC
Following selection will lead you to adjust the picture horizontally, in
a linear proportion, to fill the entire screen (useful for viewing 4:3
formatted DVDs).
14:9
You
can
through
screen
You
the
enjoy
picture
format of 14:9
the 14:9 mode. The
4:3 is
magnified
can move
the
screen
or
general
14:9 is viewed
to the upper / lower and
screen
up
or
TV programme
the
just like that
left / right.
MENU
PR
down with Δ / Ε button.
VOL
OK
VOL
Zoom
Following
selection will lead you to view the
alternation, while filling the entire
tom
portions
screen
up
or
of the
picture
screen.
will be
picture
without any
However, the top and bot-
cropped.
You
can
move
the
PR
down with Δ / Ε button.
4:3
Following selection will lead you to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the left and right
sides.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
23
Picture In Picture
Option :
PIP (Picture
in
(PIP) Function
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button once to switch on the sub picture.
Repeatedly press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
PIP
PR-
PR+
SWAP
INPUT
Each time this button is pressed, each
displayed as shown below.
number
(option)
AV4
VOL
OK
VOL
Program
SIZE
STILL
input
picture.
mode for the sub
pic-
AV2
AV 1
AV2(Y/C)
AV3
between main and sub
Press the SWAP button to
POSITION
mode for the sub
Note :When the main picture is AV modes, the sub
able to select TV mode.
Swapping
PR
input
ture is
Program
PR
picture
exchange
selection for sub
picture
is avail-
pictures
the main and sub
pictures.
picture
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture.
Note
Sub
:
Press the Δ
picture
/ Ε
buttons to select a program for the main picture.
size
Repeatedly press the SIZE button to select the desired sub picture
size. The sub picture appears as 1/9 size of the main picture, followed by 1/16.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
24
position
is
Twin Picture Function
On and off
Press the PIP button twice to switch
Note
ture
:
When the sub
picture
on
the twin
pictures.
picture,
size is 1/2 of the main
the
pic-
quality might get poor.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
mode for the sub
picture.
PIP
Each time this button is
ture is
displayed
Program
as
pressed,
each
input
mode for the sub
pic-
shown below.
number
(option)
AV4
Note :When the main
PR+
SWAP
AV2
AV 1
INPUT
PR
AV2(Y/C)
AV3
picture
PR-
is AV modes, the sub
picture
is avail-
VOL
OK
VOL
able to select TV mode.
Swapping
between main and sub
Press the SWAP button to
Program
The sub
exchange
selection for sub
picture programme
pictures
the main for sub
PR
pictures.
picture
selection is available when the sub
pic-
ture is TV mode. Press the PR +/- buttons to select a programme
for the sub
Note
:
picture.
Press the Δ / Ε buttons to select a program for the main picture.
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television proshare
grammes,
prices and many other topics.
Teletext is
a
up-to-the-minute
TV/AV
TEXT
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
PR
VOL
OK
VOL
PR
Press the TEXT button to switch to teletext.
If TV and text picture are displayed half and half of the screen,
press the TEXT button again to display text picture fully.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
1
2
3
4
5
6
7
8
9
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
0
1.
M
2.
lowing page.
Programming
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro-
easily
3.
4.
26
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
you can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
Teletext
TOP text
The
user
(option)
(option)
guide displays
the bottom of the
four fields-red, green, yellow and blue at
The yellow field denotes the next group
screen.
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with auto-
TV/AV
matic overflow to the next block.
3.
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively
4.
The
red
the Δ button
button
Alternatively
can
to
permits
the Ε button
can
existing
be used.
return
to
previous
selection.
PR
be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
VOL
OK
VOL
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
1
2
3
4
5
6
7
8
9
0
Page
1.
selection
Press the
i
button to select the index page.
select the pages which are colour coded
tom line with the same coloured buttons.
2.
You
3.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
4.
The Δ / Ε button
can
along
the bot-
INDEX
buttons in FASTEXT mode.
can
be used to select the
preceding
or
fol-
lowing page.
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
VOL
OK
Displays
VOL
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will
display
change
to the page number.
Press this button to view the
PR
1
2
3
HOLD
4
5
6
Stops
7
8
the automatic page
updated
change
teletext page.
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
9
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
0
?
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button
again.
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
Note
:
picture off press this button again.
When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, Δ / Ε
NUMBER buttons.
change
Press this button
28
again
to exit this function.
or
Connection of external
You
can connect additional
etc. to your set.
equipment,
such
as
equipment
VCRs, camcorders
Here shown may be somewhat different from your set.
ANT IN
75Ω
Aerial socket
AV3
L
AUDIO
OUT
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
R
UPGRADE PORT
AV1
AV2
VCR
Euro scart Sockets
1.
Connect the Euro scart socket of the VCR to the Euro scart
ANT IN
socket1,2or3oftheset.
2.
75Ω
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
AV3
L
AUDIO
OUT
socket1,2or3,thesetwillswitchtoAV1,AV2orAV3mode
automatically. But if you want to keep on watching TV mode,
R
UPGRADE PORT
AV1
AV2
press the Δ / Ε button.
Otherwise press the TV/AV button on the remote control hand1, AV 2 or AV 3. The VCR playback picture
appears on the screen.
set to select AV
VCR
You
can
also record programmes received
by
the TV
on
video
tape.
Note
a.
b.
c.
d.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart socket 1. These signals are
transmitted, for example, by a pay TV decoder, game machine
or photo CD unit, etc.
If both Euro scart 1, 2 and 3 sockets have been connected to
the VCRs simultaneously, only the AV 2 can be received.
If the S-VIDEO(Y/C) signal is received through the Euro scart
socket 2, you must change to the AV2(Y/C) mode.
If you use a RCA to Scart adaptor (not supplied), when both
VIDEO IN and Y/C IN(S-VIDEO) sockets have been connected
to the adaptor, the picture of the set can be unstable.
Signal type RGB,
AV4
R AUDIO
L/MONO VIDEO
S-VIDEO
TV/AV
MENU
OK
VOL
PR
Audio/Video in sockets
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the TV/AV button to select AV4.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
VCR
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
29
Connection of external
Audio out sockets
ANT IN
equipment
(AUDIO OUT)
75Ω
AV3
L
AUDIO
OUT
AV1
phone
sockets for
a
Hi-Fi
amplifier system
are on
the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
R
UPGRADE PORT
The
AV2
through
the stereo
amplifier system.
S-Video/Audio in sockets
Amplifier
When
connecting a VCR
picture quality will be
to the S-VIDEO socket of the set,
the
further
1.
Connect the S-Video socket of the VCR to the S-VIDEO socket on the front or side
2.
R
AUDIO
L MONO VIDEO
S-V DEO
TV/AV
MENU
OK
VOL
PR
30
the side
panel of the
by pressing
3.
Select AV4
4.
Press the PLAY button
The VCR
Note
VCR
of the set.
Connect the audio cable from the VCR to the AUDIO sockets
on
AV4
panel
improved.
:
set.
the TV/AV button
on
repeatedly.
the VCR.
playback picture appears
on
the
screen.
If both S-VIDEO and VIDEO sockets have been connected
to the VCR
simultaneously, only
the S-VIDEO
can
be received.
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
change
provider(s)
in ambient
ture may result in
(VCR only)
humidity
or
tempera-
unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
an
31
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
2.
All
faulty components
charge for a period of
which fail due to defective manufacture will be
12 months from the
date of
original
replaced
free of
purchase.
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
The dealer
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifi-
C.
serial number of the apparatus is removed, defaced, misused, or altered.
Any claims made under guarantee must be directed to the dealer from whom the
cations
are
made to the apparatus,
or
if
non
standard components
are
used
or
if the
was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
become exhausted or worn in use.
equipment
D.
E.
Aerial
alignment
and
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration Card:
It is
helpful to complete at least your name,
address, phone, model & serial numbers
and return it. This will enable LG to assist
you
in
the future should
you
receipt, your units be stolen,
modifications be necessary.
To obtain information
or
assistance:
Call
0870
607
5544
lose your
should
or
Monday-Friday
9.00am-4.30pm.
Service website:
http://lgelectronics.co.uk
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF