LG | RE-40NZ80RB | LG RE-40NZ80RB Owner’s Manual

Colour Television
OWNER'S MANUAL
Please read this manual
carefully before operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back
mation to your dealer when you
Model number
:
Serial number
:
cover
require
and
quote this infor-
service.
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0408D
(MP03AB, 100R/U TX)
(3840VA0024A/B, 3840VA0016C)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
8
On
9
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning
Fine tuning / Programme edit
Favourite programme
Calling the programme table
Setting
10
Picture adjustment
PSM (Picture Status Memory)
DRPC (Digital Reality Picture Clarity)
VM (Velocity Modulation)
Picture adjustment / Auto convergence
Convergence (option) / Picture format
Turbo picture selection (option)
15
Sound adjustment
SSM (Sound Status Memory)
Sound adjustment
Turbo sound selection (option)
Sound output selection / Stereo/Dual
NICAM reception (option)
(option)
19
reception
22
Time setting
Clock / On/Off time
Auto sleep
Other functions
TV and AV modes / Auto AV switching
PIP Picture Source Selection (option)
Child lock / Sleep timer
PIP
23
(option)
25
operation (option)
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
26
Connection of external equipment
Aerial socket
Euro scart sockets
Audio/Video in sockets
S-Video/Audio in sockets (S-AV)
Component in sockets
Variable Audio out sockets (AUDIO
29
Troubleshooting
2
check list
OUT)
31
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire
moisture.
Wiring (in
or
shock hazard, do not expose the set to rain
U.K.
or
only)
This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 5 amp. When replacing the fuse always use a 5 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or "LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
U.K.
Warning (in
only)
A mains
plug removed
destroyed. A mains plug
a
from the mains lead of this set must be
with bared wires is hazardous if inserted in
mains socket.
Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted,
the distribution board.
Important (in
U.K.
use a
5 amp
fuse, either in the plug,
or
at
only)
The wires in this mains lead are coloured in accordance with the following codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Service
Never
remove
the back cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
high voltage
properly, unplug it
very
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Do not place the set on a sloping or unstable area as the casters
on the bottom of the set may cause it to move and to be damaged.
When
ture
displaying
still
pictures
such
as
videogames, 16:9
a long time,
format, PIP display, and station label for
may be
persisted
on
the
or
4:3
the
picimage
screen.
Manufactured under license from Dolby Laboratories.
and
double-D
the
symbol are trademarks of
Laboratories. (option)
"Dolby"
Dolby
3
Location and function of controls
All the functions can be controlled with the remote control handset.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Remote control handset
Before you use the remote control
teries. See the next page.
POWER
1
1.
TV/AV
2
MULTIMEDIA
TURBO
SOUND
PICTURE
PIP
TEXT
12
14
4
PR-
PR+
SWAP
MENU
INPUT
PR
from
standby
2.
TV/AV
selects TV or AV mode.
switches the set on from
standby.
3.
TURBO SOUND BUTTON
selects Turbo sound.
4.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in clockwise direction.
SCAN
switches on or off the programme scan mode 12 sub
5.
MENU
selects
13
3
15
MUTE
16
5
VOL
OK
VOL
6
PR
123
456
7
7
PSM
8
9
0
SSM
17
8
POSITION
SIZE
MIX
9
I/II
SCAN
STILL
TIME
SLEEP
REVEAL
M
Q.VIEW
6.
?
LIST
ARC
10
STOP
11
REW
P/STILL
PLAY
REC
FF
POWER
switches the set
handset, please install the bat-
18
or
off to
standby.
pictures.
a menu.
D / E (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
F / G (Volume Up/Down)
adjusts the volume.
adjusts
19
20
on
menu
OK
settings.
accepts your selection
or
7.
NUMBER BUTTONS
switches the set on from
8.
PSM (Picture Status
recalls your preferred
9.
SLEEP
sets the
sleep
displays
the current mode.
standby or directly
Memory)
picture setting.
select
a
number.
timer.
10. I/II
selects the language during dual language broadcast.
selects the sound output (option).
11. VCR BUTTONS
control a LG video cassette recorder.
(With TELETEXT/PIP)
4
Location and function of controls
12. MULTIMEDIA
selects Component 1 or Component 2 modes.
switches the set on from standby.
13. TURBO PICTURE BUTTON
selects Turbo picture.
14. TELETEXT BUTTONS (option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
POWER
1
TV/AV
2
15. SWAP
SOUND
previously viewed programme.
favourite programme.
a
16. MUTE
switches the sound
on or
12
PICTURE
13
3
returns to the
selects
MULTIMEDIA
TURBO
TEXT
14
off.
MENU
17. SSM (Sound Status Memory)
recalls your preferred sound setting.
PR
MUTE
16
5
18. LIST
the programme table.
displays
VOL
OK
VOL
6
19. ARC (Aspect Ratio Control)
select your desired picture format.
20. Q.VIEW
PR
returns to the
selects
a
previously viewed programme.
favourite programme.
* : No function
COLOURED BUTTONS
TELETEXT
models)
or
These buttons
programme edit.
:
are
used for teletext
(only
7
1
2
3
4
5
6
7
8
9
PSM
0
SSM
17
8
Note : In teletext mode, the PR +/-, SWAP and INPUT buttons
used for teletext function.
are
UPDATE
INDEX
HOLD
SIZE
TIME
REVEAL
MIX
Battery
installation
9
10
two AAA type batteries.
The remote control handset is powered by
To load the batteries, turn the remote control handset over and
open the battery compartment. Install two batteries as indicated by 11
the polarity symbols ( + and
) marked inside the compartment.
SLEEP
M
I/II
Q.VIEW
STOP
P/STILL
REW
PLAY
LIST
ARC
REC
?
18
19
20
FF
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(With TELETEXT/Without PIP)
5
Location and function of controls
Front
panel
RE/RL-44/49/54NA13/14 series
?
S-VIDEOL/MN
8
TV/AV
TVAV
MNU
OK
MUTE
1
VOL
MENU
OK
MUTE
PR
VOL
11
PR
AUDIO
NOFF
7654 3
2
R
AV3
(Side panel)
RE/RL-39NZ43 series
?
8
TV/AV
1
T/V
MNU
OK
NDX
OL
MENU
OK
VOL
INDEX
PR
PR
7659
2
310
RE/RL-44/49/56NZ23 series
?
8
TV/AV
TVAV
MNU
OK
OL
MENU
VOL
OK
PR
PR
1
7
653
10
2
RE/RL-44/54NA23/24 series
?
?
RE/RL-44/54NA43/44 series
8
PR
MUTE
PR
OK
VOL
8
TVAV
ON/OFF
PR
MUTE
PR
MENU
VOL
OK
VOL
1
TV/AV
POWER
3
2
13
6
PR
MUTE
PR
MENU
VOL
OK
VOL
TV/AV
ON/OFF
4657
MUTE
PR
MENU
2
MENU
VOL
PR
VOL
OK
VOL
TV/AV
465
7
Location and function of controls
Front
panel
RE/RL-39/40/45/57NZ60 series
?
AV3
8
TV/AV
TV/AVMENU OK MUTE
1
VOL
MENU
OK
S-VIDEOL/MNAU
11
PR
VOL
MUTE
PR
R
2
76543
(Side panel)
RE/RL-40/45/57NZ80 series
?
8
TV/AV
TV/AV MENU
OK
MUTE
VOL
MENU
OK
S-VIDEOL/MNAU
11
PR
VOL
MUTE
R
PR
AV3
1
2
76543
(Side panel)
1.
MAIN POWER (ON/OFF)
switches the set on or off.
2.
F / G
8.
REMOTE CONTROL SENSOR
INDEX (option)
switches LED DISPLAY on or off.
10. LED (Light Emitting Diode)
9.
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
D / E (Programme Up/Down)
illuminates
selects a programme or a menu item.
switches the set on from standby.
POWER/STANDBY INDICATOR
illuminates brightly when the set is in
mode.
dims when the set is switched on.
brightly
when the set is switched
on.
:
:
3.
standby
STEREO
:
SLEEP
:
LOCK
:
PAL/SECAM indicator
NTSC indicator
STEREO indicator
SLEEP Timer indicator
CHILD LOCK indicator
11. AUDIO/VIDEO IN SOCKETS
4.
5.
MUTE (option)
switches the sound
on or
or
off.
displays
the current
mode.
6.
MENU
selects
*
a menu.
CASTERS (on the bottom)
turn and move the set
7.
TV/AV
selects TV or AV mode.
switches the set on from
(AV3)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-AV)
Connect the video out socket of an S-VIDEO
VCR to the S-VIDEO socket.
Connect the audio out sockets of the S-VIDEO
VCR to the audio sockets as in AV3.
OK
accepts your selection
DISPLAY
(option)
(option)
easily.
standby.
7
Basic
operation
On and off
1.
2.
3.
4.
POWER
TV/AV
MULTIMEDIA
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, D / E, TV/AV,
MULTIMEDIA or NUMBER buttons on the remote control handset
to switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
TURBO
SOUND
Programme
selection
You can select
buttons.
a
programme number with the D / E
or
NUMBER
SWAP
MENU
PR
MUTE
Volume
adjustment
Press the F / G button to
Note
VOL
OK
:
When the TV
adjust
the volume.
(speaker)
is On, it's available.
VOL
Quick view
Press the SWAP
Note
PR
Q.VIEW button to view the last programme you
or
watching.
were
:
This function works
only
when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
1
2
3
4
5
6
7
8
9
0
SSM
favorite programme.
Mute function
Press the MUTE button. The sound is switched off and the
W appears.
You can cancel it
SOUND button.
by pressing
display
the MUTE, F / G, SSM, I/II, TURBO
Auto Demonstration
I/II
Q.VIEW
To review all the menus programmed in the set, press the OK button of the front panel control for about 10 seconds. To stop auto
demonstration, press any button of the front panel control or
POWER button of the remote control.
On
The
screen
language
selection
be displayed on the
guage. First select your language.
1.
2.
menu
can
(option)
screen
in your desired lan-
Press the MENU button and then D / E button to select the
Special
Press
menu.
the
G
button
and
then
D
/
E
button
to
select
Language.
3.
Press the G button and then D / E button to select your desired
language.
4.
All the on screen displays will appear in the selected language.
Press the OK or F button to select the Special menu.
Repeatedly press the MENU button to return to normal TV
viewing.
8
On
The
an
dialogue
operator
also
screen menus
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
Press the MENU button and then D / E button to
display
each
menu.
2.
3.
4.
Press the G button and then D / E button to select a menu item.
Press the G button to display the sub menu or the pull-down menu.
Change the setting of an item in the sub or pull-down menu with
F/GorD/E.
You can move to the higher level menu by pressing the F button
and to move to the lower level menu by pressing the G button.
Note :
a.
In the teletext mode, menus are not displayed.
b.
In some models, the Normal/Turbo search will not display,
only the Start will display in the Auto programme menu.
c.
In some models, the BG, L will display.
d.
In some models, the Language, Input (
) will not display.
e.
In some models, the Auto convergence will not display, only
the Convergence will display in the Picture menu.
MENU
Auto programme
Station
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
{
VOL
()O}{O OKOMENU
PR
OBG
OOI
ODK
OK
VOL
()O}{O OKOMENU
Station
menu
Manual programme
Picture
PSM
DRPC
VM
Contrast
{
Brightness
Colour
Storage
System
{
{
{
Channel
{
{
Fine
{
{
{
Search
Name
Booster
{
{
Sharpness
Convergence
{
2
PR
{
{
{
()O}{OOKOMENU
()O}{O OKOMENU
Picture
menu
Programme
Sound
SSM
AVL
DBS
TV
Balance
{
edit
OO0OOCO03
OO5OOSO69
{
O1OOCO03OOO6OOSO17
{
O2OOCO12OOO7OOSO22
{
{
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
()O}{OOKOMENU
Sound
menu
Time
Clock
{
OffOtime
OnOtime
{
AutoOsleep
{
{
()O}{OOKOMENU
T ime
menu
Special
Language
Input
InputOOO(
{
{
)
ChildOlock
{
{
()O}{OOKOMENU
Special
menu
TV programme
9
TV stations
Setting up
Station
Station
Menu
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
()O}{OOKOMENU
tuning
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Auto pro-
gramme.
3.
Press the G button to
display
the Auto programme
menu.
Auto programme
MENU
OK
VOL
5.
6.
7.
PR
1
2
3
4
5
6
7
8
9
0
{
NormalOsearch
TurboOsearch
{
OBG
OOI
ODK
{
{
()O}{O OKOMENU
PR
4.
VOL
System
StorageOfrom
8.
9.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
L
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the OK or F button.
Press the D / E button to select Storage from.
Press the G button. Select the beginning programme number
with the F / G button or NUMBER buttons on the Storage
from pull-down menu. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the OK button.
Press the D / E button to select Normal or Turbo search.
Option:
In
some
models, you
can
only
select Start.
Note :
a.
Turbo search is further faster than Normal search and in
some models, these searches will automatically store all receivable stations.
b. If the programmed station has poor quality sound, select the
system again in the Manual programme menu.
10. Press the G button to begin auto programming.
Auto programme
Auto programme
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
{
OCO01O(BG)
{
System
StorageOfrom
{
NormalOsearch
TurboOsearch
{
77O7O7O736%
MENU
{
{
OCO01O(BG)
77O7O7O736%
MENU
(Normal search)
(Turbo search)
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
11.
10
Repeatedly
viewing.
press the MENU button to return to normal TV
Setting up
Manual programme
TV stations
Station
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Manual
programme.
Press the G button to display the Manual programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
Station
Menu
{
()O}{O OKOMENU
menu.
Manual programme
Storage
System
{
Channel
{
Fine
{
{
Search
Name
Booster
2
{
{
{
()O}{O OKOMENU
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
Press the D / E button to select Storage.
Press the G button to select the programme number. Select the
desired programme number (0 to 99) with the F / G button or
NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' in front of it, i.e. '05'
for 5.
Press the OK button.
Press the D / E button to select System.
Press the G button. Select a TV system with the D / E button
on the System pull-down menu;
L
: SECAM L/L' (France: SECAM-L models only)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the OK or F button.
Press the D / E button to select Channel.
Press the G button. Press the D / E button to select V/UHF or
Cable on the Channel pull-down menu.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the OK or F button.
Press the D / E button to select Search.
Press the G button. Press the F / G button to commence
searching on the Search pull-down menu. If a station is found
the search will stop.
Press the OK button to store it. The display Stored will appear.
MENU
VOL
PR
OK
VOL
PR
1
2
3
4
5
6
7
8
9
0
Manual programme
Storage
System
{
{
Channel
{
Fine
{
Search
Name
Booster
{
{{{{
{
{
Stored
16. To store another station, repeat steps 4 to 15.
17. Repeatedly press the MENU button to return to normal TV
viewing.
11
TV stations
Setting up
Station
Station
Menu
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
4.
()O}{OOKOMENU
5.
6.
7.
1 to 3.
Press the D / E button to select Name.
Press the G button on the Name pull-down menu.
Press the D button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the position by pressing the F / G button and then make
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
MENU
VOL
VOL
1.
2.
3.
4.
5.
6.
PR
1
2
3
4
5
6
7
8
9
set with
Press
Press
Press
down
Press
pull-
menu.
the OK button.
the MENU button to return to normal TV
Repeatedly press
viewing.
tuning
Normally
1.
2.
3.
the 'Manual programme tuning' steps 1 to 3.
the D / E button to select Booster.
the G button.
the D / E button to select On or Off on the Booster
Repeat
Fine
0
a
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
PR
OK
Only
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 3.
Press the D / E button to select Fine.
Press the G button.
Repeat
Manual programme
Storage
System
{
Channel
{
Fine
{
Search
Name
Booster
{
{
{{{{
{
{
}{O OKOMENU
4.
5.
6.
Press the F / G button to fine tune for the best picture and
sound on the Fine pull-down menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will be
ber during programme selection.
12
indicated
by
a
yellow
num-
Setting up
Programme
TV stations
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
1.
2.
3.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E
button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
Station
Menu
{
()O}{O OKOMENU
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
DeleteOOOOCopy
MoveOOOOOOSkip
()}{O OKOMENU
Deleting
1.
2.
a programme
Select a programme to be deleted with the D / E or F / G button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
1.
2.
1.
2.
3.
PR
VOL
VOL
a
programme
Select a programme to be copied with the D / E
Press the GREEN button.
All the following programmes are shifted down
Moving
MENU
or F
one
/ G button.
position.
a
programme
Select a programme to be moved with the D / E or F / G button.
Press the YELLOW button.
Move the programme to the desired programme number with
PR
1
2
3
4
5
6
7
8
9
theD/EorF/Gbutton.
4.
Press the YELLOW button
again
Programme
to release this function.
0
edit
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
O4OOSO67OOO9OOCO11
MoveOOff
()}{O MENU
a programme number
Select a programme number to be skipped with the D / E or F
/ G button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that
you will be unable to select it using the D / E button during normal TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
Skipping
1.
2.
3.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
Setting up
Station
Station
Menu
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
{
{
TV stations
Favourite programme
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then D / E button to select the
Station menu.
Press the G button and then D / E button to select Favourite
programme.
()O}{OOKOMENU
3.
Press the G button.
Favourite programme
AutoOprogramme
ManualOprogramme
{
ProgrammeOedit
FavouriteOprogramme
{
Off
{
56O CO 05
{
}{O()OOKOMENU
4.
5.
6.
SWAP
MENU
PR
7.
VOL
OK
VOL
8.
9.
Press the F / G button to select On or Off.
Press the D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly
press the SWAP
favourite programmes.
Calling
PR
1
2
3
4
5
6
7
8
9
0
Q.VIEW button to select stored
or
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying
Station
OO0OOCO03
OO5OOSO69
O1OOCO03OOO6OOSO17
O2OOCO12OOO7OOSO22
O3OOSO66OOO8OOCO09
LIST
O4OOSO67OOO9OOCO11
Q.VIEW
()}{O OKOMENU
Note :
a.
You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the D / E or F / G button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
a programme table
programme table pages which contain
Paging through
There
are
10
grammes.
Pressing the D / E
Repeatedly
14
or
F / G button
repeatedly
100
pro-
turns the pages.
press the MENU button to return to normal TV
viewing.
Picture
PSM
1.
2.
3.
adjustment
(Picture Status Memory)
Picture
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select PSM.
Press the G button and then D / E button to select a picture
setting on the PSM pull-down menu.
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
Picture
Menu
{
()O}{OOKOMENU
Picture
PSM
DRPC
VM
Contrast
{
Dynamic
{
Standard
{
Mild
{
Brightness
{
{
Game
User
Colour
{
Sharpness
Convergence
{
()O}OOKOMENU
4.
5.
You
Press the OK
or F
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
a desired picture (Dynamic, Standard,
User) with PSM button on the remote control. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
can
also recall
Mild, Game
DRPC
DRPC
1.
2.
3.
4.
5.
MENU
PR
or
(Digital Reality
improves image
Picture
VOL
OK
VOL
Clarity)
outlines in dark
screen.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select DRPC.
Press the G button and then D / E button to select On or Off
on the DRPC pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
PR
PSM
viewing.
VM
(Velocity Modulation)
This is the function to enhance the
1.
2.
3.
sharpness
of
image edge.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select VM.
Press the G button and then F / G button to adjust the vm.
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
1
{
{
}{O OKOMENU
4.
5.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
15
Picture
Picture
Picture
Picture
Menu
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
{
You
can
ness
1.
()O}{O OKOMENU
2.
adjustment
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer.
and tint
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select Contrast,
Brightness, Colour or Sharpness.
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
50
{
{
()O}{O OKOMENU
3.
Press the G button and then F / G button to make
on the each sub menu.
appropriate
adjustments
MENU
PR
Contrast
80
}{O()OOKOMENU
VOL
OK
VOL
4.
5.
Press the OK button to store it for the picture user.
Repeatedly press the MENU button to return to normal TV
viewing.
PR
Auto convergence
(option)
This function enables you to
adjust the colour convergence of
automatically during receiving the signals. When the set is
first installed or it is relocated, the picture may be unstable with
three colour ghosts (red, green, blue). This problem can be solved
by adjusting the colour convergence.
screen
1.
Press the MENU button and then D / E button to select the
Picture menu.
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
AutoOconvergence
{
{
{
{
{
()O}{OOKOMENU
2.
Press the G button and then D
/ E
button to select Auto
convergence.
3.
Press the G button to
Note :
a.
The
operating point
green-red'.
b.
16
adjust
the colour convergence
colour will
change
automatically.
in the order of 'blue-
Please make sure the surrounding illumination where the TV is situated remains dark otherwise the screen will become unsta- ble
or the message "Ensure lights are dimmed sufficiently" will
be displayed on screen after Auto convergence is completed.
Auto convergence will then have to be operated again.
Picture
adjustment
Picture
Convergence (option)
This function enables you to adjust the colour convergence of
screen all area or 9 points during receiving the signals. When the
set is first installed or it is relocated, the picture may be unstable
with three colour ghosts (red, green, blue). This problem can be
solved by adjusting the colour convergence.
1.
2.
Press the MENU button and then D / E button to select the
Picture menu.
Press the G button and then D / E button to select
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
Picture
Menu
{
()O}{OOKOMENU
TV/AV
Convergence.
3.
Press the G button and then D / E button to select 1
point convergence) or 9
(9 point convergence).
(All
Picture
PSM
DRPC
VM
Contrast
{
Brightness
{
Colour
{
Sharpness
Convergence
{
{
{
{
MENU
{1
{
9
{
PR
()O}{O OKOMENU
4.
VOL
Press the G button.
The display DE F G is selected in red.
If the display + are unstable with three colour
convergence needs to be adjusted.
ghosts,
OK
VOL
the colour
PR
()O}{O1-9OTV/AVOOKOMENU
()O}{OTV/AVOOKOMENU
If the
display
+
is white, colour convergence
adjustment
is not
necessary.
5.
6.
7.
Press the TV/AV button to select the display DE F G in blue.
Press the number (1 to 9) button to select
to adjust the convergence.
Press the D / E / F / G button to superimpose the display +
(red or blue) with the green one.
The display + is moved to the left, right, up or down by pressing
:
Only selection 9
the position you want
theD/E/F/Gbutton.
8.
If the red and blue
9.
10.
b.
c.
display
+ are
superimposed
with the green
+
Repeatedly press
viewing.
Note
a.
display
will be changed to yellow or cyan.
Press the OK button to store it for the convergence.
one, the
the MENU button to return to normal TV
:
adjustment before saving.
picture needs to be adjusted more after 1
(All point
convergence) adjustment, you can adjust the 9
(9 point convergence) for the position you want to adjust.
Adjust the convergence according to a broadcasting system
(50Hz or 60Hz) each.
Press the MENU button to cancel the
If the
17
Picture
adjustment
Picture format
You can watch TV in various picture formats; 4:3, 16:9.
In some models, you can watch TV in various picture formats; 16:9,
14:9, Zoom, Auto and 4:3.
Repeatedly press the ARC button to select your desired picture format.
4:3
This
picture
16:9
You can
TURBO
PICTURE
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
14:9
The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is
full.
You can move the screen up or down with D / E button.
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower and left/right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
You can move the screen up or down with D / E button.
Auto
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent.
Note : In the double window and
available.
scan
mode, ARC function isn't
PSM
Turbo
ARC
picture
selection
(option)
When this function is on, the picture will be more brilliant and distinct than normal. Repeatedly press the TURBO PICTURE button
to switch on or off.
(Turbo Picture off)
(Turbo Picture on)
Note : If you press the PSM button with the Turbo picture function,
the Turbo picture function is automatically switched off.
18
Sound
SSM
You
adjustment
Sound
(Sound Status Memory)
can
select your
preferred sound setting; Dolby Virtual (option),
Speech and you can also adjust the sound
equalizer.
Flat, Music, Movie
frequency
of the
or
SSM
AVL
DBS
TV
Balance
{
{
{
Sound
Menu
{
{
()O}{O OKOMENU
1.
2.
3.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select SSM.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Sound
SSM
AVL
DBS
TV
Balance
{
DolbyOVirtual
{
Flat
{
{
Music
Movie
{
Speech
User
{
MENU
()O}OOKOMENU
Dolby Virtual (option)
Dolby Virtual lets you experience panoramic
PR
effects of sound.
VOL
OK
VOL
0.1O0.5O1.5O5.0O10OkHz
PR
()O}{O OKOMENU
Sound Frequency Adjustment
a. Press the G button in User to display the User sub menu.
b. Select a sound band by pressing the F / G button.
c. Select appropriate sound level with the D / E button.
d. Press the OK button to store it for the sound User.
Repeatedly press
You
the MENU button to return to normal TV
remote
viewing.
(Dolby Virtual (option),
User) with SSM button on the
control. The sound Dolby Virtual (option), Flat, Music,
and Speech are programmed for optimum sound reproat the factory and cannot be changed.
can
also recall
a
desired sound
Flat, Music, Movie, Speech
Movie
duction
SSM
or
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
even
appears
though you have already set a factory preset setting;
Dolby Virtual (option), Flat, Music, Movie or Speech.
Note
:
ment on
19
Sound
Sound
Sound
Sound
Menu
SSM
AVL
DBS
TV
Balance
adjustment
{
{
{
{
{
()O}{OOKOMENU
You
adjustment
adjust AVL (Auto Volume Leveler), DBS (Dynamic Bass
Sound), TV Speaker or balance. AVL automatically keeps on an
equal volume level even if you change programmes. If you switch
DBS to on, the set creates a dynamic bass sound. The Turbo sound
can
creates an all around sound as in a concert hall.
1.
2.
Press the MENU button and then D / E button to select the
Sound menu.
Press the G button and then D / E button to select the desired
sound item; AVL, DBS, TV
(Speaker) or Balance.
Sound
SSM
{
AVL
{
DBS
{
TV
{
Balance
{
0
()O}OOKOMENU
MENU
VOL
PR
OK
VOL
3.
In the AVL, DBS and TV
(Speaker) on the Sound menu,
press the D / E button to select On or Off.
In the Balance on the Sound menu, make desired adjustment
with the F / G button on the Balance pull-down menu.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : In the
available.
Virtual
Dolby
mode, AVL and DBS function isn't
PR
Turbo sound selection
(option)
When this function is on, the sound will be more emphasized and
amplified than normal.
Repeatedly press the TURBO SOUND button to switch on or off.
(Turbo
Sound
off)
(Turbo
Sound
on)
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
20
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
Sound
Stereo/Dual
adjustment
reception
When
a programme is selected, the sound information for the station appears after the programme number and station name disap-
pear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
mono
selection for dual
Language
If
a
can
language
broadcast
programme is received in two languages (dual language), you
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II
button
repeatedly.
DUAL I sends the
primary broadcast language to the loudspeakers.
secondary broadcast language to the loud-
DUAL II sends the
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped
NICAM
high quality
Multiplex) digital
sound
with the receiver for NICAM
(Near
can
Instantaneous
reception, the
Commanding Audio
be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
I/II
1.
NICAM
When
MONO
2.
When
or
mono
is
received, you
can
select NICAM
FM MONO.
NICAM stereo is received, you can select NICAM
or FM MONO. If the stereo signal is weak, switch to
STEREO
FM
3.
mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM
mono
is selected the
display
MONO appears
on
the
screen.
21
Time
Clock
T ime
Time
Menu
setting
Clock
OffOtime
OnOtime
AutoOsleep
{
{
1.
{
{
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Clock.
Press the G button and then D / E button to adjust the hour.
Time
()O}{O OKOMENU
C lock
{
OffOtime
OnOtime
{
AutoOsleep
{
-i-o:o-i- AM
{
()O}{OOKOMENU
4.
5.
6.
Press the G button and then D / E button to adjust the minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
On/Off time
MENU
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
PR
function.
1.
VOL
OK
VOL
2.
3.
Press the MENU button and then D / E button to select the
Time menu.
Press the G
button and then D / E button to select Off
time/On time.
Press the G button and then D / E button to adjust the hour.
Time
PR
Clock
{
OffOtime
OnOtime
{
{
-i-o:o-i-
AutoOsleep
{
Pr
AM
1
VOLOOO30
Off
()O}{OOKOMENU
4.
5.
6.
7.
Press the G button and then D / E button to adjust the minute.
Only On time function; Press the G button and then D / E
button to adjust programme number and volume level.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Note :
a.
On time function works only in standby mode.
b.
To view the remaining on/off time, select the Time menu.
c.
When you switch the main power off, the Clock is reset.
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
e.
Once the on or off time is set, these functions operate daily at
the preset time.
Auto
sleep
If you select On on the Auto Sleep pull-down menu, the set will
automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting.
1.
2.
3.
4.
5.
Press the MENU button and then D / E button to select the
Time menu.
Press the G button and then D / E button to select Auto Sleep.
Press the G button and then D / E button to select On or Off
on the Auto Sleep pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
22
Other functions
TV and AV modes
Special
Special
be set for TV or AV mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the
Inputs
can
Menu
OOO
O
set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then D / E
Special
2.
3.
OOO
button to select the
menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4, S-VIDEO4, COMPONENT 1 or COMPONENT 2 on the Input pull-down menu.
TV/AV
Special
{
Input
TV
OOO
O
MENU
OOO
4.
VOL
VCR connected to the Euro scart socket 1 on the back
VCR connected to the Euro scart socket 2 on the back
AV3 : VCR connected to the AV3 sockets on the set
AV4 : VCR connected to the Euro scart socket 4 on the back
S-VIDEO4 :VCR connected to the Euro scart socket 4 on the
back
COMPONENT1 : COMPONENT connected to the COMPONENT1 sockets on the back
COMPONENT2 : COMPONENT connected to the COMPONENT2 sockets on the back
Repeatedly press the MENU button to return to normal TV
AV1
:
AV2
:
PR
VOL
PR
viewing.
Alternatively you
can
select the TV
or
AV mode
by pressing
the
TV/AV button.
In AV mode, to return to TV mode, press the D / E
or
NUMBER but-
tons.
Auto AV
switching (option)
If your VCR outputs switching voltage when connected to the Euro
scart socket, the set will switch to AV1, AV2 or AV4 mode automatically. But if you want to keep on watching TV mode, press the
D / E or NUMBER buttons.
Press the TV/AV button to return to AV modes.
23
Other functions
PIP Picture Source Selection
Special
Special
Menu
Language
Input
InputOOO(
ChildOlock
{
{
)
{
1.
{
2.
3.
()O}{O OKOMENU
(option)
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Input (
).
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, AV4 or S-VIDEO4.
Special
Language
Input
InputOOO(
ChildOlock
{
{
)
{
{
TV
AV1
AV2
AV3
AV4
S-VIDEO4
()O}OOKOMENU
4.
5.
MENU
VOL
PR
OK
Repeatedly press
viewing.
button.
the MENU button to return to normal TV
Child lock
VOL
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
ing.
1.
PR
or F
Press the OK
2.
3.
4.
5.
Press the MENU button and then D / E
Special
button to select the
menu.
Press the G button and then D / E button to select Child lock.
Press the G button and then D / E button to select On or Off
on the Child lock pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
Child lock on will not appear on the screen if
the front panel is pressed while displaying the
display
on
menus.
SLEEP
Sleep
timer
You don't have to remember to switch the set off before you go to
bed. The sleep timer automatically switches the set to standby after
the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, 90,
play
120, 180 and 240. The timer begins to count down from the number
of minutes selected.
---
Note :
a.
To view the
remaining sleep time, press
the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
---
c.
24
PIP
Option
PIP is
operation (option)
:
an
optional function,
so
that
set with PIP function can
only the
operate.
PIP
(Picture
in
Picture) displays
a
picture
within
a
picture.
On and off
Press the PIP button to switch on the sub
Press this button again to switch it off.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
:
You
can
Swapping
also
mode for the sub
input
it in the
Programme
AV2
Special
exchange
selection for sub
PR-
AV3
between main and sub
Press the SWAP button to
picPIP
AV4
adjust
picture.
mode for the sub
AV1
number
S-VIDEO4
Note
picture.
PR+
SWAP
INPUT
menu.
pictures
the main and sub
pictures.
picture
Press the PR +/- buttons to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
Sub
picture
size
Repeatedly press the SIZE button to select the desired sub
size. The sub picture appears as below.
1/16 size of the main
picture
1/9 size
picture
1/2 size
POSITION
Note : If broadcasting system of the main picture for PIP is differ
from sub picture's for PIP, the sub picture not be natural. (ex: In
case that main picture/sub picture is PAL/NTSC system)
Sub
picture
STILL
SIZE
freeze
Press the STILL button to freeze motion of the sub
Press this button again to restore motion.
Sub
SCAN
picture.
picture position change
Press the POSITION button repeatedly until desired
achieved. The sub pictures move clockwise.
Programme
position
is
scan
This function enables you to search all the stored stations on 12
sub pictures and see your favorite station by exchanging the main
and sub pictures.
Press the SCAN button repeatedly to select 12 sub pictures.
The selected sub pictures search all the stored stations
Press the SCAN button again to switch off sub pictures.
.
25
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TV/AV
TEXT
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or TV/AV button to switch off teletext. The previous
mode reappears.
PR
OK
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the preceding or fol-
Page
1.
PR
1
2
3
4
5
6
7
8
9
0
2.
lowing page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Programming
M
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
the remote control handset.
1.
Press
a
2.
Using
the NUMBER buttons, select the page you wish to pro-
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
select this page with the same coloured button.
The three other coloured buttons are programmed in the
way.
26
coloured button.
same
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the D button can be used.
4. The red button permits to return to previous selection.
Alternatively the E button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
PR
1
2
3
4
5
6
7
8
9
0
lowing page.
27
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
PR
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
PR
Stops
1
2
3
4
5
6
7
8
9
MIX
TIME
REVEAL
change
which will
occur
if
a
tele-
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
0
SIZE
the automatic page
text page consists of 2 or more sub pages. The number of
?
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
TIME
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED / GREEN, D / E
NUMBER buttons.
change
Press this button
28
again
to exit this function.
or
Connection of external
You
connect additional
can
equipment,
such
as
equipment
VCRs, camcorders
etc. to your set.
Here shown may be somewhat different from your set.
Aerial socket
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
DVD INPUT
COMPONENT1 COMPONENT2
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
AV2
LR
VARIABLE
ANT IN
AUDIO OUTPUT
LL
VIDEO
AV4
AV1
VCR
Euro scart socket
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket1,2or4oftheset.
2.
Press the PLAY button on the VCR.
If your VCR outputs a switching voltage connect to Euro scart
socket1,2or4,thesetwillswitchtoAV1,AV2orAV4mode
automatically. But if you want to keep on watching TV mode,
press the D / E
or
can
(480i/480p/576i)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
AV2
LR
VARIABLE
ANT IN
AUDIO OUTPUT
LL
VIDEO
AV4
AV1
NUMBER buttons.
Otherwise press the TV/AV button on the remote control handset to select AV 1, AV 2 or AV 4. The VCR playback picture
appears on the screen.
You
DVD INPUT
COMPONENT1 COMPONENT2
also record programmes received
by
the TV
on
VCR
video
tape.
Note
a.
b.
c.
:
i.e. the signals red, green and blue can only
be selected for the Euro scart 1 and the AV 1 can be received.
These signals are transmitted, for example, by a pay TV
decoder, game machine or photo CD unit, etc.
If both Euro scart 1, 2 and 4 sockets have been connected to
the VCRs simultaneously, only the AV 2 can be received.
In Euro scart 4 socket, the video output is not available.
Signal type RGB,
Audio/Video in sockets
1.
2.
3.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
Press the TV/AV button to select AV 3.
Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
S-VIDEOL/MN
AUDIO
R
AV3
VCR
AV3
S-VIDEOL/MNAU
R
VCR
29
Connection of external
equipment
S-Video / Audio in sockets
S-VIDEOL/MN
When
connecting
picture quality will
AUDIO
1.
R
AV3
2.
S-VIDEO VCR
3.
(S-AV)
an S-VIDEO VCR to the S-VIDEO socket, the
be further improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
or Euro scart socket 4 of the set.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
Select AV3 or S-VIDEO4 by pressing the TV/AV button repeat-
edly.
AV3
4.
S-VIDEOL/MNAU
Press the PLAY button on the VCR.
The VCR playback picture appears on the
screen.
Note : If both S-VIDEO and VIDEO sockets have been connected
to the S-VHS VCR simultaneously, only the S-VIDEO can be
received.
R
S-VIDEO VCR
Component
1.
DVD INPUT
COMPONENT1 COMPONENT2
(480i/480p/576)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
AV2
L
R
VARIABLE
ANT IN
AUDIO OUTPUT
LL
VIDEO
AV4
2.
AV1
3.
S-VIDEO VCR
4.
in sockets
Connect the COMPONENT VIDEO output sockets (Y Cb Cr,
YPbPr,YB-YR-YorYPBPR)oftheDVDplayertotheDVD
INPUT VIDEO sockets (Y PB PR) of the set.
Connect the audio cable from the DVD player to DVD
INPUT AUDIO sockets of the set.
Press the TV/AV or MULTIMEDIA button to select COMPONENT1 or COMPONENT2.
Press the PLAY button on the DVD player.
The DVD playback picture appears on the screen.
Note : DVD audio
be output.
DVD INPUT
input
can
be output, but DVD video
input
cannot
COMPONENT1 COMPONENT2
(480i/480p/576)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
AV2
L
R
VARIABLE
ANT IN
AUDIO OUTPUT
LL
VIDEO
AV4
AV1
Variable Audio out sockets
DVD
DVD INPUT
COMPONENT1 COMPONENT2
(480i/480p/576)
(R)
(R)
(L)
(L)
PR
PR
PB
PB
Y
Y
AUDIO
AV2
L
R
VARIABLE
ANT IN
AUDIO OUTPUT
LL
VIDEO
AV4
Amplifier
30
AV1
(AUDIO OUT)
The phono sockets for a Hi-Fi amplifier system are on the back of
the set; L=left sound channel, R=right sound channel.
If you connect an amplifier system, you can also play the TV sound
through the stereo amplifier system. TV speaker and external
speakers muted when pressing the MUTE button.
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
(VCR only)
31
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
2.
All
faulty components
charge for a period of
which fail due to defective manufacture will be
12 months from the
date of
original
replaced
free of
purchase.
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
The dealer
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifi-
C.
serial number of the apparatus is removed, defaced, misused, or altered.
Any claims made under guarantee must be directed to the dealer from whom the
cations
are
made to the apparatus,
or
if
non
standard components
are
used
or
if the
was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
become exhausted or worn in use.
equipment
D.
E.
Aerial
alignment
and
consumer
control
adjustments
This guarantee does not affect your statutory
are
not covered
by
this guarantee.
rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration Card:
It is
helpful to complete at least your name,
address, phone, model & serial numbers
and return it. This will enable LG to assist
you
in
the future should
you
receipt, your units be stolen,
modifications be necessary.
To obtain information
or
assistance:
Call
0870
607
5544
lose your
should
or
Monday-Friday
9.00am-4.30pm.
Service website:
http://lgelectronics.co.uk
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF

advertising