LG | RZ-17LZ10 | LG RZ-17LZ10 Owner’s Manual

LCD
Colour Television
OWNER'S MANUAL
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
on
the back cover and quote this inforrequire service.
mation to your dealer when you
Model number
:
Serial number
:
FOR THE GUARANTEE TERMS & CONDITIONS,
PLEASE REFER TO BACK COVER OF THIS MANUAL
P/NO
:
3828VA0366D
(ML027A, 091A TX)
(3840VA0024A/B, 3840VA0016C, 373-026F)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation / Front panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view
Mute function / Auto Demonstration
On screen language selection (option)
7
On
8
screen menus
Menu selection
TV stations
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite programme
Calling the programme table
9
Setting up
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / CSM (Colour Status Memory)
DRP (Digital Reality Picture) / Picture format
14
Sound adjustment
SSM (Sound Status Memory)
Sound adjustment / Stereo/Dual reception
NICAM reception (option) / Sound output selection
16
Other functions
TV, AV and PC modes
Auto AV switching / Child lock
Auto sleep / Sleep timer
18
PIP operation
On and off / Input mode selection for sub picture
Swapping between main and sub picture
Programme selection for sub picture
Sub picture size / Sub picture freeze
Sub picture position change / Programme scan
20
Teletext (option)
Switch on/off
SIMPLE text / TOP text (option)
FASTEXT / Special teletext functions
22
Connection of external equipment
Aerial socket
Euro scart socket
Audio/Video in sockets
S-Video/Audio in sockets (S-Video)
Headphone socket
25
Connection of PC
PC in socket (D-Sub jack)
USB (Universal Serial Bus) port
Menu selection / PC Setup
Troubleshooting
2
check list
(option)
27
31
Installation
Power
This set operates on a DC supply provided by the AC-DC adaptor,
the voltage is as indicated on the label on the back cover. Use only
the AC-DC adaptor supplied with the set and never apply an AC
mains to the set directly. The AC-DC adaptor operates on an AC
mains supply, the voltage is as indicated on the label of the AC-DC
adaptor.
Connect the DC plug of the AC-DC adaptor to the 12V socket of
the set.
b. Connect the AC-DC adaptor and it's power cord.
c. Connect the power cord to an AC mains.
In the event of thunderstorms or powercuts, please pull out the
mains plug of the AC-DC adaptor and the aerial plug. Do not allow
anything to rest upon or roll over the power cord, and do not place
the monitor where the power cord is subject to damage.
a.
b
c
a
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture. Do not rub or strike the Active Matrix LCD with anything
hard as this may scratch, mar, or damage the Active Matrix LCD
permanently.
Wiring (in
U.K.
only)
This set is supplied with a BS 1363 approved 13 amp mains plug,
fused at 10 amp. When replacing the fuse always use a 10 amp BS
1362, BSI or ASTA approved type. Never use this plug with the fuse
cover omitted. To obtain a replacement fuse cover contact your
dealer or "LG Electronics U.K. Ltd."
If the type of plug supplied is not suitable for the mains sockets in
your home, then the plug should be removed and a suitable type fitted. Please refer to the wiring instructions below:
Warning (in
U.K.
only)
A mains
plug removed
destroyed. A mains plug
from the mains lead of this set must be
with bared wires is hazardous if inserted in
mains socket.
Do not connect either wire to the earth pin, marked with the letter E
or with the earth symbol
or coloured green or green and yellow.
If any other plug is fitted, use a 5 amp fuse, either in the plug, or at
the distribution board.
a
Important (in
U.K.
only)
The wires in this mains lead are coloured in accordance with the following codes:
BLUE:
NEUTRAL
BROWN: LIVE
As the colours of the wires in the mains lead of this set may not correspond with the coloured marking identifying the terminals in your
plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black. The wire which
is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
Service
Never
remove
the back
cover
of the set as this can expose you to
the set does not operate proper-
high voltage and other hazards. If
ly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back.
For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
This standing angle can be adjusted as shown in pictures.
Cleaning
Unplug the set before cleaning the face of the LCD Screen. Dust
the set by wiping the screen and the cabinet with a soft, clean cloth.
If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid cleaners or aerosol cleaners.
3
Location and function of controls
All the functions
Some functions
panel of the set.
ated this set.
be controlled with the remote control handset.
also be adjusted with the buttons on the front
Only the remote control handset supplied will opercan
can
Remote control handset
MUTE
1
TV/AV
10
Before you use the remote control
teries. See the next page.
11
1.
POWER
TV/PC
I/II
12
2
LIST
EXIT
2.
MENU
13
34
3.
PR
5
VOL
on or
off.
TV/AV
selects TV or AV monitor mode.
clears the menu from the screen.
switches the set on from standby.
LIST
displays
OK
VOL
MUTE
switches the sound
handset, please install the bat-
the programme table.
4.
EXIT
exits from each mode.
5.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ
(Volume Up/Down)
adjusts the volume.
PR
123
6
456
adjusts
menu
settings.
OK
accepts
789
6.
7
SSM
0
8
ARC
PIP
PSM
14
TEXT
9
SIZE
STILL
PIP SWAP
i
4
standby
and selects
a
programme.
8.
PIP BUTTONS (option)
PIP
switches the sub picture on or off.
PIP PR +/selects a programme for the sub picture.
PIP SWAP
alternates between main and sub picture.
PIP INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
STILL
freezes motion of the sub picture.
POSITION
relocates the sub picture in up/down or left/right direction.
SCAN
switches on the programme scan mode through 3/12 sub pictures
and 9 main pictures.
9.
ARC
select your desired
TIME
MIX
PIP PR+ REVEAL
PIP PR
NUMBER BUTTONS
switches the set on from
the current mode.
displays
SSM (Sound Status Memory)
recalls your preferred sound setting.
16
?
SCAN
or
7.
15
POSITION PIP INPUT
your selection
SLEEP
M
17
picture
format.
Location and function of controls
10. TV/PC
selects TV or PC monitor mode.
clears the menu from the screen.
switches the set on from standby.
11. POWER
switches the set
on
from
standby
or
off to
standby.
12. I/II
10
selects the language during dual language broadcast.
selects the sound output (option).
MUTE
a menu.
TV/AV
TV/PC
I/II
LIST
EXIT
MENU
12
2
14. PSM
(Picture Status Memory)
recalls your preferred picture setting.
15. TELETEXT BUTTONS
11
1
13. MENU
selects
13
34
(option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
PR
5
16. PIP SWAP
returns to the
POWER
previously
OK
VOL
viewed programme.
VOL
PR
17. SLEEP
sets the
Note
:
TION,
sleep
timer.
123
If you turn on the TXT in PIP, some PIP keys, such as POSIPIP INPUT or PIP PR +/- etc. will work as TXT keys.
6
Battery
456
installation
789
The remote control handset is powered by two AAA/Alkaline type batteries. To load the
batteries,
turn
the
handset
over
remote
control
and open the battery compartment.
Install two batteries as indicated by
the polarity symbols ( + and
)
-
marked inside the
7
SSM
0
89
ARC
PIP
PSM
14
TEXT
15
POSITION PIP INPUT
SIZE
PIP SWAP
TIME
MIX
compartment.
STILL
PIP PR+ REVEAL
16
?
SCAN
i
PIP PR
SLEEP
M
17
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
5
Location and function of controls
Front
panel
78
VIDEO
9
L/MON
RAUDIO
AV3
ARC
TV/AV/PC
MENU
1
2
3
OK
VOL
PR
ON/OFF
/I
a
10
b
Side
1.
ARC
7.
picture
8.
or
menu
switches the set
PC monitor mode.
from the
on
from
4.
screen.
nal
a menu.
or
displays
the current
(Universal
Serial
connect the cable
(Volume Up/Down)
adjusts the volume.
adjusts menu settings.
Δ / Ε (Programme Up/Down)
this
selects
port.
Γ
keyboard, digital
off.
ON/OFF
switches the set
standby.
on
from
standby
supplied
with the set to
b. DOWN-STREAM PORT
( /l)
on or
PORT
port.
connect external
a
MAIN POWER
Bus)
a. UP-STREAM PORT
Φ
switches the set
6
(AV3)
to these sockets.
mode.
programme or a menu item.
switches the set on from standby.
6.
equipment
10. USB
accepts your selection
5.
AUDIO/VIDEO IN SOCKETS
connect the audio/video out sockets of exter-
OK
/
mode.
standby.
MENU
selects
standby
illuminates green when the set is in power on mode.
illuminates amber when the set is DPMS mode.
9.
3.
POWER/STANDBY INDICATOR
illuminates red when the set is in
TV, AV
clears the
REMOTE CONTROL SENSOR
format.
TV/AV/PC
selects
56
panel
select your desired
2.
4
or
off to
equipment
such
camera, PC
as a
camera
mouse,
to this
Basic
operation
On and off
1.
2.
3.
4.
Press the main power button to switch the set on.
If the set is in standby mode, press the POWER, Δ / Ε, TV/AV,
TV/PC or NUMBER buttons on the remote control handset to
switch it on fully.
Press the POWER button on the remote control handset.
The set reverts to standby mode.
Press the main power button again to switch the set off.
MUTE
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains
plug is replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
programme number with the
/
Δ
Ε
or
TV/AV
POWER
TV/PC
I/II
EXIT
MENU
NUMBER
PR
Volume
Press the
OK
adjustment
Φ
button to
Γ
/
VOL
adjust
VOL
PR
the volume.
Quick view
123
Press the PIP SWAP button to view the last programme you
were
456
watching.
789
Mute function
SSM
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
by pressing
the
MUTE,
Φ
/ Γ,
I/II, SSM button.
PIP SWAP
Auto Demonstration
To review all the
programmed in the set, press the OK butcontrols for about 10 seconds. To stop auto
demonstration, press any button of the front panel controls and the
POWER button of the remote control.
ton of the front
On
The
screen
menus
selection
be displayed on the
guage. First select your language.
1.
menu
2.
can
Press the MENU button and then
Special
?
panel
language
0
display
i
M
(option)
screen
in your desired lan-
Ε
button to select the
Δ
/
menu.
Press the OK
or
Γ
button and then
Δ
/
Ε
button to select
Language.
3.
4.
Press the Φ / Γ button to select your desired language.
All the on screen displays will appear in the selected language.
Press the OK button to select the Special menu.
Press the EXIT button to return to normal TV viewing.
7
On
screen menus
Menu selection
1.
Press the MENU button and then
2.
Press the OK
menu item.
3.
Change
Φ
/
You
Γ
the
setting
of
an
item in the sub
or
pull-down
menu
with
button.
can move
ton and to
MENU
Δ / Ε button to display each menu.
button and then Δ / Ε button to select a
or Γ
to the
higher
level
menu
to the lower level
move
by pressing the OK butby pressing the MENU
menu
button.
Note :
a.
In the PC mode, the Station menu is not displayed.
b. In the TV/AV mode, the RGB-PC menu is not displayed.
c.
In the teletext mode, menus are not displayed.
d. On some models, the Language will not be displayed.
Station
Auto programme
Manual programme
PR
Programme
OK
VOL
VOL
System
Storage
edit
BG
from
0
Start
Favourite programme
PR
ΔΕ
Γ
OK
MENU
EXIT
Station
123
menu
Picture
456
789
SSM
PSM
Dynamic
CSM
Cool
Storage
System
DRP
On
Channel
0
Γ
OK
MENU
5
Fine
ΓΓΓ
Search
ΓΓΓ
Name
ΔΕ
4
BG
V/UHF
CO5
Picture
EXIT
menu
Sound
SSM
Flat
Balance
0
AVL
Off
?
i
M
ΔΕ
Γ
OK
MENU
Sound
EXIT
0C03
5S69
BLN03
6S17
1
2C12
7S22
3S66
8C09
4S67
9C11
Delete
Copy
Skip
Move
menu
Special
TV
Input
Off
Child lock
Off
1.
Auto
Off
2.
English
3.
sleep
Language
4.
5.
ΔΕ
Γ
OK
MENU
Special
TV programme
8
EXIT
menu
--
-----
--
-----
--
-----
--
-----
--
-----
Setting up
TV stations
Station
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the Δ / Ε
or NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
Auto programme
Manual programme
Programme edit
Favourite programme
tuning
ΔΕ
Γ
All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
1.
2.
Press the MENU button and then
Station menu.
Press the OK or Γ button and then
Δ
/
/
Δ
Ε
Ε
OK
MENU
Station
EXIT
menu
button to select the
button to select Auto
programme.
Station
Auto programme
System
Storage
Manual programme
Programme
EXIT
BG
from
MENU
0
Start
edit
Favourite programme
PR
ΔΕΦΓ
OK
MENU
EXIT
OK
VOL
3.
4.
5.
6.
7.
Press the OK or Γ button. Select a TV system with the Φ / Γ
button on the System menu;
L
: SECAM L/L' (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons on the Storage from pull-down menu. Any
number under 10 is entered with a numeric '0' in front of it, i.e.
'05' for 5.
Press the Δ / Ε button to select Start.
Press the Γ button to begin auto programming.
VOL
PR
123
456
789
SSM
0
Station
Auto programme
System
Storage
Manual programme
Programme edit
BG
from
0
Start
Favourite programme
C54
9
MENU
35%
EXIT
?
i
M
All receivable stations are stored. The station name is stored for
stations which broadcast VPS (Video Programme Service),
PDC (Programme Delivery Control) or TELETEXT data. If no
station name can be assigned to a station, the channel number
is assigned and stored as C (V/UHF 01-69) or S (Cable 01-47),
followed by a number.
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
8.
Press the EXIT button to return to normal TV
viewing.
9
Setting up
Manual programme
Station
Auto programme
Manual programme
Programme
Station
Γ
edit
OK
tuning
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
Favourite programme
ΔΕ
TV stations
MENU
menu
EXIT
1.
Press the MENU button and then
Station menu.
2.
Press the OK
3.
Manual programme.
Press the OK or Γ button and then
button and then
Γ
or
Δ
Δ
/
button to select the
Ε
Δ
/
button to select
Ε
/ Ε button to select
Storage.
Station
Auto programme
Manual programme
Programme
EXIT
edit
Channel
Favourite programme
MENU
4
Storage
System
BG
V/UHF
ΓΓΓ
Search
ΓΓΓ
Name
ΔΕΦΓ 0-9 OKMENU
4.
PR
OK
VOL
VOL
5.
PR
Select the desired programme number (0 to 99) with the Φ / Γ
button or NUMBER buttons on the Storage menu. Any number
under 10 is entered with a numeric '0' in front of
Press the Δ / Ε button to select System.
it, i.e. '05' for
7.
Press the Δ /
Press the Φ
8.
Channel
If
0
Ε
/
button to select Channel.
Γ
button to select V/UHF
or
possible, select the channel number directly
Any number under 10 is entered with
front of
Cable
it, i.e. '05' for
Press the Δ /
10. Press the Φ /
9.
pull-down
Ε
Γ
menu.
button to select Search.
button to commence searching
If
a
numeric '0'
display Stored
M
on
the Search
station is found the search will
stop.
will appear.
Auto programme
Manual programme
Programme
4
Storage
System
edit
Channel
Favourite programme
BG
V/UHF
12. To store another
OK
MENU
EXIT
ΓΓΓ
Search
ΓΓΓ
CO5
Stored
station, repeat steps
3 to 11.
13. Press the EXIT button to return to normal TV
10
5
Fine
Name
ΔΕΦΓ
in
5.
Station
i
the
with the number
a
11. Press the OK button to store it.
The
on
menu.
buttons.
?
5.
Select a TV system with the Φ / Γ button on the System menu;
L
: SECAM L/L' (France)
BG : PAL B/G, SECAM B/G (Europe/East Europe)
I
: PAL I/II (U.K./Ireland)
DK : PAL D/K, SECAM D/K (East Europe)
456
SSM
CO5
EXIT
6.
123
789
5
Fine
viewing.
TV stations
Setting up
Assigning a station name
1.
Repeat the 'Manual programme tuning' steps
2.
Press the OK
3.
Press the
Γ
or Γ
button and then
button. You
can use a
Δ
Ε
/
blank,
and the alphabet A to Z.
With the Φ button you can select in the
4.
Select the
5.
your choice of the second character,
Press the OK button to store it.
position by pressing
the
Station
1 to 2.
Auto programme
Manual programme
button to select Name.
+,
-,
Programme
the numeric 0 to 9
direction.
opposite
ΔΕ
/ Γ button and then make
and so on.
Φ
Γ
OK
MENU
Station
EXIT
menu
The
6.
display Stored will appear.
Press the EXIT button to return to normal TV
edit
Favourite programme
Fine
viewing.
tuning
EXIT
Normally
fine
tuning
Repeat
Press the OK
Press the
sound
only
necessary if
reception
on
Φ / Γ button to fine tune for the best
the Fine menu.
picture
PR
and
OK
VOL
Station
Channel
Favourite programme
MENU
EXIT
BG
V/UHF
5
Fine
ΓΓΓ
Search
ΓΓΓ
Name
OK
4
Storage
System
Manual programme
Programme edit
4.
123
CO5
456
Stored
789
Press the OK button to store it.
The
5.
VOL
PR
Auto programme
ΔΕΦΓ
MENU
is poor.
the 'Manual programme tuning' steps 1 to 2.
or Γ button and then Δ / Ε button to select Fine.
1.
2.
3.
is
display Stored will appear.
Press the EXIT button to return to normal TV viewing.
The finely tuned programme will be indicated by a yellow
ber during programme selection.
SSM
0
num-
?
i
M
11
Setting up
Station
Programme
Auto programme
edit
Favourite programme
1.
ΔΕ
Γ
OK
MENU
EXIT
2.
Station
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
Manual programme
Programme
TV stations
menu
Press the MENU button and then Δ / Ε button to select the
Station menu.
Press the OK or Γ button and then Δ / Ε button to select
Programme edit.
Station
Auto programme
Manual programme
Programme
0C03
1
edit
Favourite programme
ΔΕΦΓ
EXIT
OK
MENU
EXIT
5S69
BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
Delete
Copy
Skip
Move
MENU
Deleting
1.
2.
PR
OK
VOL
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Station
VOL
Auto programme
Manual programme
PR
Programme
0C03
1
edit
Favourite programme
123
5S69
BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
Delete
MENU
EXIT
456
Copying
1.
2.
789
SSM
0
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/ Γ button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
Press the YELLOW button
again
to release this function.
Station
Auto programme
Manual programme
?
Programme
i
M
0C03
1
edit
Favourite programme
ΔΕΦΓ
Skipping
1.
2.
3.
a
MENU
EXIT
6S17
7S22
3S66
8C09
4S67
9C11
Move Off
programme number
programme number to be
Select a
skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the EXIT button to return to normal TV
12
5S69
BLN03
2C12
viewing.
Setting up
TV stations
Station
Favourite programme
This function lets you select your favourite programmes
1.
2.
directly.
Press the MENU button and then Δ / Ε to select the Station menu.
Press the OK or Γ button and then Δ / Ε to select Favourite
Auto programme
Manual programme
Programme edit
Favourite programme
programme.
ΔΕ
Station
Auto programme
On
Manual programme
1.
Programme
2.
edit
Favourite programme
3.
4.
5.
ΔΕΦΓ
3.
OK
MENU
Γ
OK
MENU
Station
--
-----
--
-----
--
-----
--
-----
--
-----
EXIT
menu
EXIT
Press the OK or Γ button and then Φ / Γ button to select On
Off.
Press the Δ / Ε button to select
-----.
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 4 to 5.
You can store up to 5 programmes.
Press the EXIT button to return to normal TV viewing.
or
4.
5.
6.
7.
--
LIST
EXIT
MENU
PR
OK
VOL
press the PIP SWAP button to select stored favourite
programmes.
Repeatedly
VOL
PR
Note : When Favourite programme is Off, press the PIP SWAP
button to view the last programme you were watching.
123
Calling the programme table
456
You can check the programmes stored in the memory
the programme table.
by displaying
Displaying programme table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
0C03
5S69
BLN03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
1
789
SSM
0
PIP SWAP
?
i
M
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
Paging through
There
are
a
programme table
10 programme table pages in which contain 100 pro-
grammes.
Pressing the
Δ
/
Ε
or Φ
/ Γ
button
repeatedly
Press the EXIT button to return to normal TV
turns the pages.
viewing.
13
Picture
PSM
Picture
PSM
Dynamic
CSM
Cool
DRP
On
1.
2.
3.
adjustment
(Picture Status Memory)
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the OK or Γ button and then Δ / Ε button to select PSM.
Press the Φ / Γ button to select a picture setting on the PSM menu.
Picture
ΔΕ
Picture
Γ
OK
MENU
EXIT
menu
PSM
Dynamic
CSM
Cool
DRP
On
ΔΕΦΓ
4.
5.
EXIT
MENU
60
Sharpness
50
EXIT
viewing.
1.
adjustment
adjust picture contrast, brightness, colour intensity, sharpand tint (NTSC AV only) to the levels you prefer.
can
ness
OK
VOL
50
Colour
Press the OK button.
Press the EXIT button to return to normal TV
Picture
VOL
MENU
89
Brightness
You can also recall a desired picture (Dynamic, Standard, Mild,
Game or User) with PSM button on the remote control. The picture
Dynamic, Standard, Mild and Game are programmed for optimum
picture reproduction at the factory and cannot be changed.
You
PR
OK
Contrast
Press the MENU button and then
Δ
/
Ε
button to select the Picture
Δ
/
menu.
PR
2.
3.
Press the OK or Γ button and then
Press the OK button.
Ε
button to select PSM.
Picture
123
456
PSM
Dynamic
CSM
Cool
DRP
On
Contrast
89
Brightness
50
Colour
60
Sharpness
50
789
ΔΕΦΓ
SSM
0
OK
MENU
EXIT
Stored
PSM
Press the
button to make appropriate adjustments on
/
each sub menu.
You can also select other User items directly with Δ / Ε button
and adjust them with Φ / Γ button.
5.
Press the OK button to store it for the picture User.
The display Stored will appear.
6.
Press the EXIT button to return to normal TV viewing.
Note : Only Contrast and Brightness are displayed in PC mode.
4.
i
Γ
Φ
?
CSM
M
You can adjust the
levels you prefer.
1.
2.
3.
(Colour Status Memory)
temperature of R, G, B (Red, Green, Blue)
Press the MENU button and then
Picture menu.
Press the OK or Γ button and then
Press the OK button.
Δ
Δ
/
Ε
to the
button to select the
/ Ε button to select CSM.
Picture
PSM
Dynamic
CSM
Cool
DRP
On
EXIT
Stored
ΔΕΦΓ
4.
The
Repeat
the 'Picture
OK
MENU
Red
50
Green
50
Blue
50
adjustment' steps
4 to 6.
temperature Warm, Normal and Cool are programmed for
optimum picture reproduction at the factory and can not be
changed.
14
Picture
DRP
DRP
1.
2.
3.
4.
5.
adjustment
Picture
(Digital Reality Picture)
improves image
outlines in dark
screens.
Press the MENU button and then Δ / Ε button to select the
Picture menu.
Press the OK or Γ button and then Δ / Ε button to select DRP.
Press Φ / Γ button to select On or Off on the DRP menu.
Press the OK button.
Press the EXIT button to return to normal TV viewing.
PSM
Standard
CSM
Cool
DRP
On
ΔΕ
Γ
OK
MENU
Picture
EXIT
menu
Picture format
You
watch TV in various picture formats; Wide,14:9, Zoom,
4:3.
Repeatedly press the ARC button to select your desired picture format.
can
Auto,
EXIT
Wide
You can
enjoy the cinema (the picture format of 16:9) or general TV
programme through the 16:9 mode.
The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full.
14:9
You can
enjoy the picture format of 14:9 or
the 14:9 mode.
The screen 14:9 is viewed just like that the
to the upper / lower and left / right.
general
through
screen
TV programme
4:3 is
magnified
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper / lower and left / right sides
so that the screen 16:9 is full. The bottom and top of the picture
may be lost.
MENU
PR
OK
VOL
VOL
PR
123
456
789
SSM
0
ARC
Auto
When your set receives the wide screen signal, it will be automatically changed to the picture format to be sent.
4:3
This
picture
format is 4 to 3 of
general
Note : In the double window and
available.
?
TV.
scan
mode, ARC function isn't
i
M
15
Sound
SSM
Sound
SSM
Flat
Balance
0
AVL
Off
You
Γ
OK
MENU
(Sound Status Memory)
select your preferred sound setting; Flat, Music, Movie or
and you can also adjust the sound frequency of the equalizer.
Press the MENU button and then Δ / Ε button to select the
Sound menu.
Press the OK or Γ button and then Δ / Ε button to select SSM.
Press the Φ / Γ button to select a sound setting on the SSM menu.
can
Speech
1.
2.
3.
ΔΕ
adjustment
EXIT
Sound
Sound
menu
SSM
Flat
Balance
ΔΕΦΓ
EXIT
Equalizer
0
AVL
Off
OK
MENU
0.1
EXIT
0.5
1.0
5.0
10 kHz
Sound Frequency Adjustment
a. Press the OK button in SSM.
MENU
Sound
SSM
PR
Equalizer
User
Balance
0
AVL
Off
OK
VOL
VOL
0.1
PR
ΔΕ Φ Γ
OK
MENU
0.5
1.0
5.0
10 kHz
Stored
EXIT
b. Select a sound band by pressing the Φ / Γ button.
Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored will appear.
c.
123
Press the EXIT button to return to normal TV
456
You
789
SSM
0
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Flat, Music, Movie or Speech.
Note
:
ment
on
Sound
You
adjustment
adjust balance, AVL (Auto
ically keeps on an equal volume
?
i
viewing.
also recall a desired sound setting (Flat, Music, Movie, Speech
or User) with SSM button on the remote control. The sound settings
Flat, Music, Movie and Speech are programmed for optimum sound
reproduction at the factory and cannot be changed.
can
M
can
Volume Leveler). AVL automatlevel even if you change pro-
grammes.
1.
Press the MENU button and then Δ / Ε button to select the
Sound menu.
2.
Press the OK or Γ button and then Δ / Ε button to select the
desired sound item; Balance or AVL.
3.
Make desired adjustment with the Φ / Γ and then press the OK
button.
Sound
SSM
Flat
Balance
0
AVL
ΔΕΦΓ
4.
OK
MENU
EXIT
Press the EXIT button to return to normal TV
In PC mode, you
DW2, POP1 mode.
Note
16
On
:
can
select Sound select
viewing.
menu
in PIP, DW1,
Sound
Stereo/Dual
adjustment
reception
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
I/II
for dual language broadcast
programme is received in two languages (dual language), you
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II but-
Language selection
If
a
can
ton
repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is
equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
When NICAM mono is received, you can select NICAM MONO
or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO. When FM
mono is selected the display MONO appears on the screen.
Sound output selection
In AV
mode, you
can
select
output sound for the left and right loud-
speakers.
press the I/II button to select the sound output.
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loud-
Repeatedly
L+R
:
L+L
:
R+R
:
speaker.
Audio signal
speakers.
Audio signal
speakers.
from audio L
input
is sent to left and
right
loud-
from audio R
input
is sent to left and
right
loud-
17
Other functions
TV, AV and PC modes
Special
TV
Input
Child lock
Off
Auto
Off
sleep
Language
ΔΕ
Special
Γ
English
OK
MENU
EXIT
menu
Inputs can be set for TV, AV or PC mode. AV mode is used when a
video cassette recorder (VCR), or other equipment is connected to
the set.
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
1.
Press the MENU button and then
Special
2.
3.
TV/AV
EXIT
Δ
/
Ε
button to select the
menu.
Press the OK or Γ button and then Δ / Ε button to select Input.
Press the Φ / Γ button to select TV, AV1, AV2, AV3, S-Video
or RGB-PC.
MENU
Special
TV
Input
Child lock
Off
Auto
Off
sleep
Language
PR
English
OK
VOL
VOL
ΔΕΦΓ
OK
MENU
EXIT
PR
123
456
789
4.
SSM
The AV and RGB-PC modes are :
AV 1 : VCR connected to the Euro scart socket of the set
AV 2 : VCR connected to the AV2 of the set
AV 3 : VCR connected to the AV3 of the set
S-Video : VCR connected to the S-Video of the set
RGB-PC : PERSONAL COMPUTER connected to the PC socket of the set
Press the EXIT button to return to normal TV viewing.
0
Alternatively you
TV/AV button.
In AV
mode,
can
select the TV
to return to TV
or
AV mode
mode, press the
Δ
/
by pressing
Ε or
the
NUMBER but-
tons.
?
i
18
M
Auto AV
switching (option)
If your VCR outputs an AV switching voltage when connected to the
Euro scart socket, the set will switch to AV 1 mode automatically. But
if you want to keep on watching TV mode, press the Δ / Ε or NUMBER buttons.
Press the TV/AV button to return to AV modes.
Other functions
Child lock
Special
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized viewing.
1.
Press the MENU button and then
Special
2.
3.
Δ
Ε
/
TV
Input
Child lock
Off
Auto
Off
sleep
Language
English
button to select the
menu.
Press the OK
lock.
Press the Φ /
or Γ
button and then
Δ
button to select On
Γ
/
Off
or
ΔΕ
button to select Child
Ε
on
Γ
OK
MENU
Special
the Child lock
EXIT
menu
menu.
4.
Press the EXIT button to return to normal TV
viewing.
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The
any button
Child lock on will not appear on the screen if
the front panel is pressed while displaying the
display
on
EXIT
MENU
menus.
Auto
sleep
PR
If you select On on the Auto sleep menu, the set will automaticalswitch itself to standby mode approximately ten minutes after a
TV station stops broadcasting.
OK
VOL
ly
1.
Press the MENU button and then
Special
2.
Δ
/
Ε
button to select the
123
menu.
Press the OK
or Γ
button and then
Δ
/
Ε
button to select Auto
sleep.
3.
4.
456
Press the Φ / Γ to select On or Off on the Auto sleep
Press the EXIT button to return to normal TV viewing.
Sleep
VOL
PR
menu.
789
SSM
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time has elapsed.
Press the SLEEP button to select the number of minutes. The dis---'
will appear on the screen, followed by 10, 20, 30, 60,
play
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
0
'
?
SLEEP
Note :
To view the
a.
i
remaining sleep time,
press the SLEEP button
once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
---'
until the display
appears.
When you switch the set off, the set releases the preset sleep
time.
'
c.
19
PIP
operation (option)
Option
PIP is
:
an
optional function,
so
that
only the
set with PIP function
can
operate.
PIP
in
(Picture
Select
TV, AV
Picture) displays
or
PC mode to
a
picture
within
a
picture.
operate PIP function.
On and off
Press the PIP button to switch
MUTE
POWER
TV/AV
TV/PC
I/II
LIST
EXIT
MENU
Off
Repeatedly
OK
the sub
PIP
DW1
picture.
DW2
POP1
(PC
picture
mode
is
only)
press this button to switch it off.
mode selection for sub
Input
VOL
on
Each time this button is pressed, each mode for the sub
displayed as shown below.
picture (PC
Press the PIP INPUT button to select the
VOL
input
mode
only)
mode for the sub
picture.
Each time this button is
ture is
123
displayed
Programme
as
pressed,
each
input
mode for the sub
pic-
shown below.
number
AV1
AV2
AV3
S-Video
456
789
SSM
0
Swapping
PSM
between main and sub
Press the PIP SWAP button to
exchange
pictures
the main and sub
pictures.
PIP
Programme
PIP INPUT
SIZE
PIP SWAP
STILL
PIP PR+
selection for sub
Press the PIP PR +/- buttons to select
picture
a
programme for the sub picdisplayed just below the
ture. The selected programme number is
?
programme number of main
picture.
PIP PR
M
Sub
picture
size
Press the SIZE button and then press the Φ / Γ button until desired
size is achieved. The SIZE button doesn't work in DW1, DW2 and
POP1 mode.
Sub
picture
freeze
Press the STILL button to freeze motion of the sub
Press this button
20
again
to restore motion.
picture.
PIP
Sub
operation (option)
picture position change
Press the POSITION button and then press the Δ / Ε or Φ / Γ butuntil desired position is achieved. The sub pictures moves
up/down or left/right. The POSITION button doesn't work in DW1,
ton
DW2 and POP1 mode.
Programme
scan
This function enables you to search all the stored stations
pictures and 9 main pictures and see your favourite station
ing
the main and sub
on
3/12 sub
pictures.
Press the SCAN button
repeatedly
MUTE
to select POP3/POP12/POP9.
TV/AV
TV/PC
I/II
LIST
EXIT
EXIT
MENU
The selected sub or main pictures search all the stored stations.
Press the EXIT button to switch off sub or main pictures.
<PIP/POP
Specification>
picture
PIP
PC
RF (TV)
PC
AV
RF
(TV)
AV
Note
:
PC
PC
PR
PIP mode
Condition
Main
POWER
by exchang-
PIP
RF
(TV)
POP3
POP12
RF (TV)
RF (TV)
channel scan channel scan
POP9
POP1
PC
strobe
RF
AV
strobe
AV
strobe
PC
strobe
AV
PC
PC
strobe
PC
strobe
RF (TV)
strobe
x
PC
PC
strobe
PC
strobe
AV
strobe
x
by
VOL
VOL
PR
(TV)
AV
The PIP picture resolution will be decreased
OK
123
456
789
the PIP size.
SSM
0
PSM
PIP
POSITION
?
SCAN
M
21
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
Teletext is
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
a
up-to-the-minute
MUTE
POWER
TV/AV
TV/PC
I/II
LIST
EXIT
EXIT
MENU
PR
OK
VOL
VOL
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
Switch on/off
Press the TEXT button to switch to teletext. The initial page or last
page appears on the screen. (4:3 mode)
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT or EXIT button to switch off teletext. The previous
mode reappears.
PR
SIMPLE text
123
Page selection
1.
456
789
2.
SSM
0
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
lowing
PSM
page.
a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT
M button to switch to LIST mode.
Programming
PIP
POSITION
mode, press the
Four teletext page numbers of your choice can be colour coded and
selected by pressing the corresponding coloured button on
easily
?
SCAN
M
the remote control handset.
1.
Press
a
2.
Using
the NUMBER
3.
gramme.
Press the OK button. Then the selected page is stored as the
selected page number by blinking once. From now on, you can
4.
coloured button.
buttons, select the page you wish
to pro-
select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
: In PIP of the PC mode, select the sub picture size is PIP,
DW1, DW2, POP1.
In PIP of the PC mode, the text on the screen may be unstable.
Note
22
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
PR
FASTEXT
PR
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
123
Page selection
1.
2.
3.
4.
Press the
i button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
lowing
456
789
SSM
0
PSM
page.
?
i
23
Teletext
Special
?
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
SIZE
Selects double
height text.
enlarge the top
button again to enlarge
Press this button to
Press this
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
UPDATE
Displays the TV picture
PR
on
PR
while
waiting
for the
new
will change to the page number.
Press this button to view the updated teletext page.
HOLD
Stops
456
the automatic page
text page consists of 2
change
which will
occur
if
a
tele-
sub pages. The number of
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
789
0
screen
display
123
SSM
the
teletext page. The display
will appear at the top left hand
corner of the screen. When the updated page is available then
PSM
or more
stop symbol is displayed
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
MIX
Displays
the teletext pages superimposed on the TV
picture off press this button again.
picture.
To switch the TV
?
TIME
i
When
viewing
the time at the
button
again
a
TV programme, press this button to display
corner of the screen. Press this
top right hand
to
remove
the
display.
In the teletext
mode,
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the
NUMBER buttons.
change
Press
24
again
to exit this function.
RED/GREEN,
Δ
/ Ε
or
Connection of external
You
connect additional
can
etc. to your set.
Examples
equipment,
are
such
as
equipment
VCRs, camcorders
shown below.
Aerial socket
1.
Connect the RF out socket of the VCR to the aerial socket of
the set.
2.
3.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
4.
the 'Manual programme tuning' section.
Select the programme number where the VCR channel
stored.
5.
Press the PLAY button
on
is
VCR
the VCR.
Euro scart socket
1.
Connect the Euro scart socket of the VCR to the Euro scart
socket of the set.
2.
Press the PLAY button on the VCR.
If your VCR outputs an AV switching signal via the Scart lead the
set will auto switch to AV 1 mode
want to
keep
on
watching
in TV
on
start of
playback,
mode, press the
Δ
/
Ε
but if you
or NUM-
BER buttons.
Otherwise press the TV/AV button on the remote control handset to select AV 1. The VCR playback picture appears on the
VCR
screen.
You
can
also record programmes received
by
the TV
on
video
tape.
Audio/Video in sockets
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV button to select AV 2.
Press the PLAY button on the VCR.
The VCR
playback picture
appears
on
the
screen.
VCR
Note : If you have a mono VCR, connect the audio cable from the
VCR to the AUDIO L/MONO socket of the set.
25
Connection of external
equipment
S-Video/Audio in sockets
When
connecting
picture quality will
1.
an
(S-Video) (option)
S-VIDEO VCR to the S-VIDEO
be further
socket, the
improved.
Connect the S-Video socket of the VCR to the S-VIDEO socket of the set.
S-VIDEO VCR
2.
Connect the audio cable from the S-VIDEO VCR to the AUDIO
sockets of the set.
3.
Select S-Video
4.
Press the PLAY button
The VCR
Insert the
on
the TV/AV button
repeatedly.
the VCR.
playback picture
Headphone
can
by pressing
appears
on
the
screen.
socket
headphone plug to the headphone socket of the set. You
through the headphone. To adjust the head-
listen to the sound
phone volume,
press the
Φ
/
Γ
button. If you press the MUTE but-
ton, the sound from the headphone is switched off.
26
Connection of PC
PC in socket
1.
2.
3.
4.
(D-Sub jack)
Connect the signal cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
Connect the audio cable from the PC to the PC SOUND sockets of the set.
Press the TV/PC button to select PC.
Switch on the PC, and the PC screen appears on the set.
The set can be operated as the PC monitor.
Note
block
:
If you have
Apple macintosh, connect the VGA desktop
from the 3 row 15 pin to 2 row 15 pin with the
cable and connect the VGA desktop block to the Macintosh.
an
PERSONAL COMPUTER
(not supplied)
signal
Displayable
MODE
Monitor
Specification
Resolution
Horizontal
Frequency(KHz)
VGA
SVGA
(MAC)
XGA
WXGA
Vertical
Frequency(Hz)
640x480
31.4KHz
60Hz
640x480
35KHz
67Hz
640x480
37.5KHz
75Hz
640x480
43.2KHz
85Hz
800x600
35.1KHz
56Hz
800x600
37.8KHz
60Hz
800x600
48KHz
72Hz
800x600
46.8KHz
75Hz
800x600
53.6KHz
85Hz
832x624
49.7KHz
75Hz
1024x768
48.3KHz
60Hz
1024x768
56.4KHz
70Hz
1024x768
60KHz
75Hz
1024x768
68.6KHz
85Hz
1280x768
39.5KHz
50Hz
1280x768
47.6KHz
60Hz
1280x768
60KHz
75Hz
(Synchronization input
form
:
separate)
Note :
a.
If the set is cold, there may be a small "flicker" when the set is
switched on. This is normal, there is nothing wrong with the set.
b. If possible, use the VESA 1,024x768@60Hz video mode to
obtain the best image quality for your LCD monitor. If used under
the other resolutions, some scaled or processed pictures may
appear on the screen. If used to PC vertical frequency 85Hz,
some noise can be seen when PIP is on. In this case, set the PC
vertical frequency to 60Hz. The set has been pre-adjusted to the
mode VESA 1,024x768@60Hz.
c.
Some dot defects may appear on the screen, like Red, Green or
Blue spots. However, this will have no impact or effect on the
monitor performance.
d. Do not press the LCD screen with your finger for a long time as
this may produce some temporary distortion effects on the
screen.
e.
When the PC screen appears on the set, a message may appear
the screen, and the message will differ according to the
Window system version (Win98, 2000). If a message appears
click "Next" until the message finishes.
If the message "out of Range" appears on the screen, adjust
the PC as in the 'Displayable Monitor Specification' section.
on
f.
DPMS (Display Power Management Service) mode
When the PC is in the power saving mode, automatically the
itor goes into DPMS mode to save the energy.
Note : Use the supplied
mode may not work.
signal cable
with the set.
mon-
Otherwise, DPMS
27
Connection of PC
USB (Universal Serial Bus) port
USB (Universal Serial Bus) is an innovation in connecting the set
conveniently to your PC. By using the USB, you will be able to connect PC mouse, keyboard, digital camera, PC camera and other
external equipments to the set instead of having to connect them to
USB
up-stream port
the PC. And you can connect or disconnect them while the PC is
running. This set has an integrated Bus-powered USB hub, allow-
ing
up to other USB devices to be connected it.
1.
Connect the up-stream port of the set to the down-stream port
of the USB compliant PC using the supplied USB cable. PC
must have
2.
USB down-stream
a
USB
port.
Connect the USB compliant external
stream ports of the set.
equipments
to the down-
ports
Note :
To activate the USB hub function, the set must be connected to
a USB compliant PC with the supplied USB cable
b.
When connecting the USB cable, check that the shape of connector at the cable side matches the shape at the connecting
side.
c.
Even if the set is in a power saving mode, USB compliant
devices will function when they are connected to the USB ports
(both the up-stream and down-stream) of the set.
Down-stream power supply : 100mA for each (MAX).
a.
.
28
Connection of PC
Menu selection
1.
2.
3.
Press the MENU button and then Δ / Ε button to display each menu.
Press the OK or Γ button and then Δ / Ε button to select a
menu item.
Change the setting of an item in the sub menu or the pull-down
menuwithΦ/Γ.
You can move to the higher level menu by pressing the OK button and to move to the lower level menu by pressing the MENU
button.
Note :
See 'Picture adjustment' section to adjust the picture.
b. See 'Sound adjustment' section to adjust the sound.
c.
See 'TV, AV and PC modes' section to select TV, AV1, AV2,
AV3, S-Video or RGB-PC.
a.
MENU
PR
Picture
OK
Sound
PSM
Dynamic
CSM
Cool
DRP
On
SSM
Flat
Balance
VOL
0
AVL
VOL
PR
Off
123
ΔΕ
Γ
OK
MENU
Picture
EXIT
ΔΕ
Γ
OK
MENU
Sound
menu
EXIT
menu
456
789
PC programme
SSM
RGB-PC Menu
Special
H-Position
50
Input
V-Position
50
Child lock
Clock
50
Auto
Phase
10
RGB-PC
Off
Off
sleep
Language
English
?
Auto-configure
i
ΔΕ
Γ
0
OK
MENU
RGB-PC
EXIT
menu
ΔΕ
Γ
OK
MENU
Special
M
EXIT
menu
29
Connection of PC
PC
RGB-PC Menu
H-Position
50
V-Position
50
Clock
50
Phase
10
Setup
You
can adjust horizontal/vertical position, clock, phase,
configure as you prefer.
and auto-
Auto-configure
ΔΕ
RGB-PC
Γ
OK
MENU
menu
1.
Press the MENU button and then
2.
RGB-PC menu.
Press the OK or
EXIT
desired
picture
Γ
Δ
button and then
/
Δ
button to select the
Ε
/ Ε button to select the
item.
RGB-PC Menu
H-Position
50
V-Position
50
Clock
50
Phase
10
Auto-configure
MENU
ΔΕΦΓ
3.
PR
Φ
/
Γ
button to make
H-Position / V-Position
This function is to adjust
OK
VOL
Press the
VOL
OK
picture
MENU
EXIT
appropriate adjustments.
to
left/right
and
up/down
as
you
prefer.
PR
Clock
This function is to minimize any vertical bars or stripes visible on
screen background. And the horizontal screen size will also
123
the
change.
456
Phase
789
SSM
This function allows you to remove any horizontal noise and
clear or sharpen the image of characters.
0
Auto-configure
This function is for the automatic
adjustment
of the
screen
posi-
tion, clock and phase. The displayed image will disappear for
few seconds while the
30
a
is in progress.
Note : Some signal from some graphics boards may not function properly. If the results are unsatisfactory, adjust your monitor's position, clock and phase manually.
?
i
Auto-configuration
M
4.
Press the OK button to store it for the PC monitor
5.
Press the EXIT button to return to normal TV
picture.
viewing.
Troubleshooting
check list
Symptoms
No
picture,
no
Sound
sound
OK, poor picture
Picture
OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Incorrect
position
Vertical bars
or
stripes
on
background
Horizontal noise
Signal
Cable message appears
Check these items and try to
these
adjust
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Auto-configure
or
adjust
(VCR only)
the H/V
Auto-configure
or
adjust
Clock
Auto-configure
or
adjust
Phase
Is the
Signal
Cable connected
position
or
loose
31
GUARANTEE
LG Electronics U.K. Ltd. will
provide
the
following
services in order to
expedite
this
Guarantee.
1.
All
faulty components which fail due to defective manufacture will be replaced
charge for a period of 12 months from the original date of purchase.
2.
The dealer
free of
(or his service agent) who sold the product will be reimbursed for any
provided in the repair of this LG equipment, for a period of 12 months from the
original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.
labour
PLEASE NOTE:
A.
B.
The dealer may restrict the guarantee to the original purchaser.
The dealer is not obliged to carry out service under guarantee if unauthorized modifications
apparatus, or if non standard components are used or if the
apparatus is removed, defaced, misused, or altered.
C. Any claims made under guarantee must be directed to the dealer from whom the
are
made to the
serial number of the
D.
equipment was originally purchased. The dealer may, before carrying out service
under guarantee, require a receipted account as evidence of the date of purchase.
We respectfully point out that your dealer is not obligated to replace batteries if they
E.
Aerial
become exhausted
This
alignment
guarantee
or worn
and
in
use.
consumer
control
does not affect your
adjustments
are
not covered
by this guarantee.
statutory rights.
REQUIREMENTS TO MAINTAIN WARRANTY COVERAGE:
RETAIN YOUR RECEIPT TO PROVE DATE OF PURCHASE. A COPY OF YOUR RECEIPT
MUST BE SURRENDERED AT THE TIME GUARANTEE SERVICE IS PROVED.
Product
Registration
Card:
It is
helpful
to
complete
address, phone, model
at least your name,
& serial numbers
and return it. This will enable LG to assist
should you
your units be stolen,
modifications be necessary.
you
in
the future
receipt,
To obtain information
or
assistance:
Call
0870
607
5544
lose your
should
or
Monday-Friday
9.00am-4.30pm.
Service website:
http://lgelectronics.co.uk
MODEL NO.*
*
Please
complete
for your
SERIAL NO.*
own
record
DATE OF PURCHASE
*
Download PDF

advertising