LG | RC8055AH3M | LG RC7055AH2M Owner’s Manual

RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
MFL68721088
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
WORK
SEC.
PRINTING DEGREE
EXTERIER
INTERIER
LG MODEL 명.
88
1
RC*055*H*M
1
MATERIAL AND PRINTING DESCRIPTION
LANGUAGE
PAGE
모조지 80g OFFSET 인쇄
English
40
REMARK
-
<< 주기 >>
<BACK>
216
<FRONT>
1.
2.
3.
4.
5.
재질, 인쇄방법, 인쇄도수, 외곽치수등은 작업표에 준한다.
인쇄내용, 문자크기 및 형상, 선의 굵기 등은 설계에서 제시된 FILM에 준함.
외곽치수는 절단후 치수임.
양산전에 설계 한도를 득할 것.
본 부품에 금지물질이 포함되지 않도록 하고,
상세 내용은 LG(63)-A-5501-34를 만족할 것.
<< NOTES >>
154
154
1.
2.
3.
4.
5.
Material, printing and exterier size are refer to work tables.
Printing, text size and line are based on LG design film.
Exterier size on the drawing is cutting line.
Before product controlled by criteria sample.
The part should not contain prohibited substances(Pb,Cd,Hg,Cr+6,PBB,PBDE)
and details should comply with LG standard of LG(63)-A-5501-34.
PDF
ILLUSTRATOR
TRIG.
UNIT
mm
SCALE
1
1
MODELING DESIGNED REVIEWED CHECKED APPROVED
3
2
인쇄내용 변경
EAGH700560
17.07.18
문성철
정영석
1
인쇄내용 변경
EAGH700061
17.07.04
문성철
정영석
REF. NO.
DATE
REV. NO.
기호
REVISION DESCRIPTION
변경 사항
시방 번호
년/월/일
PREPARED APPROVED
시방자
승인자
박은진
17.05.29
LG 전자
(주)
LG Electronics Inc.
윤혜진
17.05.29
정영석
17.05.29
RELATED DWG.
T
I
T
L
E
DWG.
No.
DR COMPLETED
도면 DR 완료
완료일 :
MANUAL,OWNER’S
CI Eco Jupiter(D) Wifi
1/1
MFL68721088
OWNER'S MANUAL
DRYER
Before beginning installation, read these instructions carefully.
This will simplify installation and ensure that the product is
installed correctly and safely. Leave these instructions near the
product after installation for future reference.
RC7055*H**
RC8055*H**
MFL68721088
Rev.02_071717
www.lg.com
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS
This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS........................................................3
IMPORTANT SAFETY INSTRUCTIONS..................................................... 3
Disposal of Your Old Appliance................................................................... 9
INSTALLATION.......................................................................10
Specifications............................................................................................ 10
Accessories (Optional).............................................................................. 10
Installation Place Requirements................................................................ 11
Stacking Installation Instructions............................................................... 12
OPERATION............................................................................15
Using the Appliance................................................................................... 15
Sorting Laundry......................................................................................... 16
Control Panel............................................................................................. 17
Programme Table...................................................................................... 19
Option Programme.................................................................................... 21
Rack Dry (Optional)................................................................................... 23
SMART FUNCTIONS..............................................................24
Using LG SmartThinQ Application............................................................. 24
Using Smart Diagnosis™.......................................................................... 27
MAINTENANCE.......................................................................28
Cleaning the Lint Filter............................................................................... 28
Emptying the Water Container.................................................................. 29
Cleaning the Cool Air Inlet Grill.................................................................. 29
Wiping the Moisture Sensor...................................................................... 29
TROUBLESHOOTING............................................................30
Diagnosing Problems................................................................................ 30
Error Codes............................................................................................... 34
WARRANTY.............................................................................35
OPERATING DATA.................................................................36
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect
operation of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product,
follow basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised
to ensure that they do not play with the appliance.
3
EN
For use in Europe:
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not
be made by children without supervision.
Children of less than 3 years should be kept away unless
continuously supervised.
Installation
•Make
•
sure the appliance is properly installed, grounded, and
adjusted by qualified service personnel according to the
installation instructions.
•Never
•
attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This
•
appliance should only be transported by two or more people
holding the appliance securely.
•Do
• not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind,
or rain or temperatures below freezing.
•Tighten
•
the drain hose to avoid separation.
•If
• the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized
service centre.
•Do
• not plug multiple socket outlets, an extension power cable or
adapter with this appliance.
4
EN
•This
•
appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This
•
appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This
•
appliance is equipped with a power cord having an
equipment-grounding conductor and a grounding power plug. The
power plug must be plugged into an appropriate socket outlet that
is installed and grounded in accordance with all local codes and
ordinances.
•Improper
•
connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance
is properly grounded.
•Do
• not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
Operation
•Do
• not attempt to separate any panels or disassemble the
appliance. Do not apply any sharp objects to the control panel in
order to operate the appliance.
•Do
• not repair or replace any part of the appliance. All repairs and
servicing must be performed by qualified service personnel unless
specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
5
EN
•Keep
•
the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do
• not put animals, such as pets into the appliance.
•Do
• not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never
•
reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do
• not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as waxes, wax removers, oil, paint, gasoline,
degreasers, drycleaning solvents, kerosene, petrol, spot removers,
turpentine, vegetable oil, cooking oil, acetone, alcohol, etc.).
Improper use can cause fire or explosion.
•In
• case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do
• not push down the door excessively, when the appliance door
is open.
•Use
•
new hose or hose-set supplied with the appliance. Reusing
old hoses can cause a water leak and subsequent property
damage.
•Do
• not touch the door during a high temperature programme.
•Do
• not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
6
EN
•If
• the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep
•
all washing detergents, softener and bleach away from
children.
•Do
• not touch the power plug or the appliance controls with wet
hands.
•Do
• not bend the power cable excessively or place a heavy object
on it.
Maintenance
•Securely
•
plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect
•
the appliance from the power supply before cleaning
the appliance. Setting the controls to the OFF or stand by position
does not disconnect this appliance from the power supply.
•Do
• not spray water inside or outside the appliance to clean it.
•Never
•
unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
7
EN
Technical Safety for Using the Dryer
•Do
• not dry unwashed items in the appliance.
•Fabric
•
softeners, or similar products, should be used as specified
by the fabric softener instructions.
•Remove
•
all objects from pockets such as lighters and matches.
•Never
•
stop the appliance before the end of the drying cycle unless
all items are quickly removed and spread out so that the heat is
dissipated.
•The
•
appliance is not to be used if industrial chemicals have been
used for cleaning.
•Items
•
such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with
foam rubber pads should not be dried in the appliance.
•Do
• not drink the condensed water. Failure to do so may result in
food-borne illnesses.
•The
•
lint trap has to be cleaned frequently.
•Lint
•
must not to be allowed to accumulate around the appliance.
•Do
• not spray dry cleaning detergent directly onto the appliance or
use the appliance to dry clothes left with dry cleaning detergent.
•Do
• not dry clothes stained with oil substances. Oil substances
(including edible oils) stained on clothes cannot be completely
removed even after washing with water.
8
EN
•The
•
appliance must not be supplied through an external switching
device, such as a timer, or connected to a circuit that is regularly
switched on and off by a utility.
•Remove
•
clothes from the product immediately when drying is
complete or the power is turned off during the drying process.
Leaving clothes that has been dried in the appliance unattended
could result in fire. Clothes removed from the appliance after
drying could result in fire. Remove clothes immediately after
drying, and then hang or lay the clothes flat to cool.
Disposal
•Before
•
discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose
•
of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can
cause suffocation.
•Remove
•
the door before disposing of or discarding this appliance
to avoid the danger of children or small animals getting trapped
inside.
Disposal of Your Old Appliance
•• This crossed-out wheeled bin symbol indicates that waste electrical and electronic
products (WEEE) should be disposed of separately from the municipal waste stream.
•• Old electrical products can contain hazardous substances so correct disposal of your
old appliance will help prevent potential negative consequences for the environment
and human health. Your old appliance may contain reusable parts that could be used
to repair other products, and other valuable materials that can be recycled to conserve
limited resources.
•• You can take your appliance either to the shop where you purchased the product, or
contact your local government waste office for details of your nearest authorised
WEEE collection point. For the most up to date information for your country please
see www.lg.com/global/recycling.
•This
•
dryer contains fluorinated greenhouse gases. R134a
(GWP: 1430): 0.390 kg / 0.558 t CO2-eq. Hermetically
sealed.
9
INSTALLATION
EN
Specifications
1
1
2
2
1 Water container
2 Control panel
4
3
3 Glass door
4 Opaque door
5 Air ventilation grill
5
5
Model
RC7055*H**
Power supply
Size
Product weight
Allowable temperature
RC8055*H**
230 V~ 50 Hz
600 mm (W) X 690 mm (D) X 850 mm(H)
54 - 57 kg
5 - 35 °C
Max. capacity
7 kg
8 kg
••Appearance and specifications may vary without notice to improve the quality of the appliance.
Accessories (Optional)
Please contact the LG Electronics Customer Information Centre for purchase.
Condensing Drain Hose
and Hose Holder
10
Dry Rack
Stacking Kit
EN
Installation Place
Requirements
Positioning
Location
30-50 cm
2 cm
2 cm
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
••Do not overload the outlet with more than one
appliance.
Additional Clearance : For the wall, 30 – 50
cm: rear /2 cm: right & left side
••Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
NOTE
••For better drying performance, please keep
the rear of the appliance away from wall.
••Do not install the appliance where there is a
risk of frost or dust.
••The appliance may not be able to operate
properly or may be damaged by freezing of
condensed water in the pump and drain hose.
••Do not install the appliance next to a
high-temperature appliance like refrigerator,
oven or stove etc, which can cause poor
drying performance and programme duration,
and adversely affect the proper functioning of
the compressor. The appliance performs best
at a room temperature of 23 °C.
••Install the appliance on a flat hard floor.
••Make sure that air circulation around the
appliance is not impeded by carpets, rugs,
etc.
••Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
••Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The
reliability of the electronic control unit may be
impaired at temperatures below freezing point.
••If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
••Please ensure that when the appliance is
installed, it is easily accessible for an engineer
in the event of a breakdown.
••With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure the
appliance is stable, and a clearance of
approximately 20 mm is left between the top
of the appliance and the underside of any
work-top.
Ventilation Requirement
••Alcove or under counter
−−Ensure air flow of 3.17 m3/min through the
appliance
••Closet
−−Closet door must have 2 (louvered)
openings, each having a minimum area of
387 cm2, located 8 cm from bottom and top
of door.
11
EN
WARNING
••Avoid installing the appliance around a heat
source.The rear side of the appliance must be
well ventilated. Failure to follow these
instructions may result in problems.
••The appliance should not be installed next to
a refrigeration appliance.
••The appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
••Do not use an extension cord or double
adapter.
••Always unplug the appliance after use.
••Connect the appliance to an earthed socket in
accordance with current wiring regulations.
••The appliance must be positioned so that the
plug is easily accessible.
Stacking Installation
Instructions
Your dryer can be placed on top of an LG
washing machine and securely fixed with a
stacking kit. This installation must be conducted
by qualified service personnel to ensure it has
been installed correctly.
The qualified service personnel will ensure you
have the correct stacking kit for your model of
washing machine and will ensure it is firmly
fixed. For these reasons, expert fitting is
essential.
Stacking Kit
In order to stack this dryer an LG stacking kit is
required.
Dryer
Washing
machine
This dryer may only be stacked on top of an LG
washing machine. Do not attempt to stack this
dryer on any other washing machine, as
damage, injury or property damage could result.
Shape and
assembly
direction
12
Washing Machine Top plate
size
550 mm
600 mm
EN
Installation Procedure
1
Place the LG dryer on the LG washing
machine.
2
Remove the two screws from the bottom of
the rear cover on each side as illustrated
below.
3
Align the stacking kit holes and the rear
cover holes.
••3-1) 600 mm
WARNING
••Incorrect installation can cause serious
accidents.
••The weight of the appliance and the height of
installation make the stacking procedure too
risky for one person. This procedure should
be performed by two or more qualified service
personnel.
••The appliance is not suitable for a built-in
installation. Please do not install as a built-in
appliance.
••Do not operate if the appliance is not properly
stacked.
••3-2) 550 mm
4
Fasten the two screws that were removed
earlier from the dryer to the stacking kit.
5
Use the four screws in the accessory box
(16 mm) to assemble the washing machine
rear cover and stacking kit.
6
The procedure for the opposite side will be
the same.
13
EN
Condensed Water Drain-out
Leveling the appliance
Normally, condensed water is pumped up to the
water container where water is collected until
manually emptied. Water can also be drained
out directly to a mains drain, especially when
the dryer is stacked on top of a washing
machine. With a connecting kit for the mains
drain hose, simply change the water path and
re-route to the drainage facility as below:
Leveling the appliance prevents unnecessary
noise and vibration. Place the appliance on a
solid, level floor.
If the appliance is not properly level, adjust the
front leveling feet as necessary.
Turn them clockwise to raise and counterclockwise to lower until the appliance no longer
wobbles, both front-to-back and side-to-side and
corner-to-corner.
1
Take the connecting kit out.
2
Separate the water container hose from the
kit.
Adjustable Feet
Adjustable Feet
3
14
Connect the drain hose to the kit.
Adjustable Feet
Diagonal Check
••When pushing down the edges of the top
plate diagonally, the appliance should not
move up and down at all (Check both
directions). If the appliance rocks when
pushing the top plate diagonally, adjust the
feet again.
OPERATION
Using the Appliance
Before the first cycle, set the appliance to dry
for five minutes to warm up the drum. Open the
door between loads the first few times you use
the appliance to allow any odours from the
interior of the appliance to disperse.
1
EN
CAUTION
••Be careful not to trap laundry between the
door and rubber seal.
3
Turn the power on.
••Press the Power button. The indicator
icon above the button will become
illuminated, indicating that the appliance is
all set to run.
4
Select the drying programme you want.
••You can choose a programme by turning
the programme selector knob until the
required programme is indicated.
••If you press the Start/Pause button
without choosing a programme, the
appliance will proceed with the Cotton
programme. Please refer to the
programme table for the detailed
information.
5
Press the Start/Pause button.
6
After the cycle has finished, open the door
and remove the laundry.
7
Turn off the appliance.
••Press the Power button.
Ensure the lint filter and water container are
clean.
••The lint filter is inside the door rim. It
needs to be cleaned before each drying
cycle.
••Open the door and ensure the lint filter is
clean. If it is not, please clean the lint
filter.
••Also check if the water container needs to
be emptied for optimum drying results.
WARNING
••Do not drink the condensed water.
NOTE
••In some instances, LED window may display
(Empty water symbol) and the appliance
may stop because the water container is full.
2
Place laundry into the drum after sorting.
••The clothes should be sorted by fabric
type and dryness level and all the strings
and belts of clothes should be well tied
and fixed before being put into the drum.
Push the laundry to the back to keep it
away from the door seal. Otherwise, the
door seal and clothes may be damaged.
Close the door.
15
EN
CAUTION
••Be careful! The drum inside may still be hot.
••The appliance must not be used for purposes
other than those for which it was designed.
NOTE
••The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that
laundry is left at a temperature that ensures
the laundry will not be damaged.
••A high atmospheric temperature and a small
room may both increase drying time as well
as energy consumption.
Sorting Laundry
Clothes have their own wash care labels, so
drying according to the wash care label is
recommended.
Not only that, the laundry must be sorted
according to size and type of fabric.
For the best drying performance and most
efficient energy usage, do not overload the
appliance.
Woollens
••Dry woollens on the Wool programme. Be
sure to follow fabric care label symbols first.
Wool may not be completely dried from the
cycle, so do not repeat drying. Pull woollens
to their original shape and dry them flat.
Woven and Loopknit Materials
••Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press and Synthetics
••Do not overload the appliance. Take out
permanent press items as soon as the
appliance stops to reduce creases.
Baby Clothes and Night Gowns
••Always check fabric care labels.
16
Rubber and Plastics
••Do not dry any items made from or containing
rubber or plastics such as:
−−Aprons, Bibs and Chair Covers
−−Curtains and Table Clothes
−−Bathmats
Fiberglass
••Do not dry fiberglass items in the appliance.
Glass particles left in the appliance may be
subsequently picked up by your clothes in
later cycles.
Icon
Description
Dry
Tumble dry
Permanent Press /
Crease resistant
Gentle / Delicate
Do not tumble dry
Do not dry
High heating
Medium heating
Low heating
No Heating / Air
Line dry / Hang to dry
Drip dry
Dry flat
In the shade
EN
Control Panel
RC7055*H**
RC8055*H**
17
EN
1 Power Button
••Press the Power button to turn power on
and off.
••Press the Power button to cancel the
Time Delay function.
2 Programme Selector
••Programmes are available according to
the laundry type.
••The lamp will light up to indicate the
selected programme.
3 Start/Pause Button
••This Start/Pause button is used to start or
pause a dry cycle.
••When in Pause, the power is turned off
automatically after 14 minutes.
4 Additional Programme Buttons
••Use these buttons to select the desired
options for the selected programme.
••In order to use the Remote Start function,
refer to SMART FUNCTIONS.
18
Display
••
: This icon indicates that the lint filter
should be cleaned or is clogged.
−−Cleaning notice: When you press the Power
button, the icon will become displayed.
−−Clogging notice: This icon will become
displayed with a buzzer sound whilst the
appliance is in operation.
••
: This icon indicates that the water
container needs to be emptied or is full.
−−Emptying notice: When you press the Power
button, this icon will become displayed.
−−Full water notice: The icon will become
displayed and a buzzer will sound while the
appliance is in operation.
••
: This icon indicates the lint filter insertion
status. If the lint filter is not inserted, the
appliance will not operate and the icon will
become displayed.
EN
Programme Table
Drying Programme
Sensor Dry Programmes
Programme
Laundry Type
Detail
Towels, dressing
For thick and quilted
gowns and bed linen
fabrics
Terry towels, tea
For thick and quilted
towels, towels and bed
fabrics that do not
linen
need to be ironed
Bath towels, tea
For fabrics that do not
Cotton
towels, underwear and
need to be ironed
cotton socks
Sheets, pillowcase and For fabrics that need to
towels
be ironed
Bed linen, table linen,
For fabrics that need to
towels, T-shirts, polo
be ironed
shirts and work clothes
Bed linen, table linen,
For thick and quilted
tracksuits, anoraks and
fabrics that do not
blankets
need to be ironed
Mixed
For fabrics that do not
Fabric
Shirts and blouses
need to be ironed
Trousers, dressers,
For fabrics that need to
skirts and blouses
be ironed
Shirts, T-shirts,
For polyamide, acrylic,
trousers, under-wear
and polyester that do
and socks
not need to be ironed
Easy Care
Shirts, T-shirts,
For polyamide, acrylic,
under-wear, anoraks
polyester that do need
and socks
to be ironed
Bulky
Bed clothes, sheets
For bulky items
Item
Jeans and colour
For jeans which do not
Jeans
fading garments.
need to be ironed
For cotton fabrics
T-shirts, pillowcase,
Skin Care
which do not need to
and towels
be ironed
Linen and towels
For small loads of
(excluding delicate
Quick Dry
suitable fabrics with
fabrics) sports wear,
short drying times
bulky Item cycle.
Drying
Level
Capacity
7 kg
8 kg
Extra
7 kg
8 kg
Very
7 kg
8 kg
Cupboard
7 kg
8 kg
Light
7 kg
8 kg
Iron
7 kg
8 kg
Very
3.5 kg
4 kg
Cupboard
3.5 kg
4 kg
Iron
3.5 kg
4 kg
Cupboard
3.5 kg
4 kg
Iron
3.5 kg
4 kg
-
2 kg
2 kg
-
3 kg
3 kg
-
4.5 kg
4.5 kg
-
3 kg
3 kg
19
EN
Sensor Dry Programmes
Programme
Laundry Type
Detail
Sports
Wear
Soccer kit and training
wear
Delicate
Silk, fine fabrics and
lingerie
Wool
Wool
For polyester material
For fabrics that are
heat-sensitive, such as
synthetic fabrics
For wool fabrics
Drying
Level
Capacity
7 kg
8 kg
-
2 kg
2 kg
-
1.5 kg
1.5 kg
-
1 kg
1 kg
Timed Drying Programmes
Programme
Rack Dry
Gentle Air
Cool Air
Warm Air
Laundry Type
Silk, wool, delicate
lingerie
Silk, wool, delicate
lingerie
All fabrics that need
refreshing
Bath towels, bath
robes, dishclothes and
acrylic quilted fabrics
Detail
Drying
Level
Capacity
7 kg
8kg
-
-
-
-
-
-
Tumbles without heat
-
-
-
Small Items & damp
clothing, Everyday
items suitable for heat
drying
-
-
-
Refreshes clothes
without tumble drying
Refreshes clothes with
gentle drying
CAUTION
••If the load is less than 1 kg, please use the Warm Air programme in Timed Drying programmes.
Wool items should be dried using the Wool programme and heat-sensitive fabrics including silk,
underwear and lingerie should be dried using the Delicate programme. Please comply with the
recommended laundry load when you select your desired programme. Otherwise, your clothes may
be damaged.
NOTE
••Tested in accordance with EN61121 and Directive 932/2012
••Set programme at Cotton Cupboard Normal (Full & Half Load) for test in accordance in conformity
with EN61121 and Directive 932/2012
••Standard Cotton programme : Cotton
+ Cupboard + Normal Option (Default) (This is the most
efficient programme in terms of the test conditions proposed by EN61121 and Directive 932/2012)
••This is suitable to dry normal wet cotton laundry. This is the most efficient programme in terms of
energy consumption for drying wet cotton laundry.
••The test results depend on room temperature, type and amount of load, water hardness and water
inlet temperature.
••If the appliance is installed as built under, it may cause performance degradation.
••If the laundry is not spun at a high speed during washing, energy consumption and drying time will
increase.
20
EN
Option Programme
Drum Light
Time Delay
Whilst the appliance is running it is possible to
see inside the drum if you select the Drum Light
function.
••Press and hold the Drum Light button for 3
seconds to activate the Drum Light function.
••Light on : Door is opened.
••Light off : Door is closed. The light is turned
off automatically.
You can use the Time Delay option to delay the
finishing time of the drying cycle. Maximum
Time Delay is 19 hours. Minimum Time Delay is
3 hours.
1
Turn the appliance on.
2
Select a programme.
3
Press the Time Delay button.
4
Set time delay hour(s) by pressing the
button.
5
Press the Start/Pause button.
Anti Crease (
Spin Speed
,
)
The Anti Crease option prevents creases that
are formed when the laundry is not unloaded
promptly at the end of the drying cycle. When
Anti Crease is selected, the appliance
repeatedly runs and pauses, giving you two
hours to unload the laundry. If the door is
opened during the Anti Crease option, the
option is cancelled.
Favorite
The Favorite option allows you to store a
customized dry programme for future use.
This additional program is able to control drying
time, allowing you to select high or normal.
••The default option is Normal.
Option
Hand Iron
This function keeps the garments more moist
than the standard Iron dry level.
1
Turn the appliance on.
2
Select a programme.
3
Press the Dry level button and select Iron.
4
Press the Option button and select Hand
Iron.
Press the Start/Pause button.
1
Turn the appliance on.
5
2
Select a programme.
Hand Iron is available to programmes specified
in the table below.
3
Select the option or additional programme.
(Anti Crease, Spin Speed etc.)
4
Press and hold the Favorite option button
for three seconds.
Programme
Dry Level
Cotton
Mixed Fabric
Easy Care
Iron
The Favorite option is now stored for future use.
To reuse the stored programme, select the
Favorite option and press the Start/Pause
button.
21
EN
Damp Dry Beep
With this option, the appliance will beep when
the load is ready for ironing.
This allows you to remove faster-drying
lightweight items or items that you would like to
iron or hang while still slightly damp.
1
Turn the appliance on.
2
Select a programme.
3
Press the Dry level button and select a
level.
4
Press the Option button and select Damp
Dry Beep.
Press the Start/Pause button.
6
When the laundry is ready for ironing, the
buzzer will sound for approximately one
minute.
7
Press the Start/Pause button and open the
door.
8
Take out laundry which you wish to iron.
(Leave the other laundry in the appliance.)
9
Close the door and press the Start/Pause
button.
Damp Dry Beep is available to programmes
specified in the table below.
Cotton
Mixed Fabric
Easy Care
22
Use this option to disable the controls. This
feature can prevent children from changing
cycles or operating the appliance.
Locking the Control Panel
5
Programme
Child Lock
Dry Level
Extra/Very
Cupboard/Light
Very/Cupboard
Cupboard
1
Press and hold the Child Lock button for
three seconds.
2
A beeper will sound, and CL will appear on
the display.
When the Child Lock is set, all buttons are
locked except the Power button.
NOTE
••Turning off the power or completing all cycles
will not reset the child lock function. You must
deactivate child lock before you can access
any other functions.
Unlocking the Control Panel
Press and hold the Child Lock button for three
seconds.
••A beeper will sound and the remaining time
for the current programme will reappear on
the display.
Buzzer
This option enables you to adjust the volume of
the beeper sound.
EN
Rack Dry (Optional)
The dryer rack is placed inside the appliance,
as in the picture below. Remove and discard
packing material before use.
The Rack Dry is designed for use with laundry
that must be dried flat, without tumbling,
including sweaters and delicate fabrics.
1
Open the door.
2
Insert the hook to the drum centre.
3
Place the dryer rack on the structure above
the lint filter and press it to complete
assembly.
4
Place wet items on top of the rack. Allow
space around items for air to circulate.
••The rack does not move, but the drum will
rotate.
5
Close the door.
6
Turn power on and select Rack Dry.
7
Press the Start/Pause button.
NOTE
••Check the lint filter and remove any lint
accumulated from items dried on the rack.
23
SMART FUNCTIONS
Using LG SmartThinQ
Application
NOTE
Things to check before using LG
SmartThinQ
••For appliances with the
or
logo
1
Check the distance between the appliance
and the wireless router (Wi-Fi network).
••If the distance between the appliance and
the wireless router is too far, the signal
strength becomes weak. It may take a
long time to register or installation may
fail.
2
Turn off the Mobile data or Cellular Data
on your smartphone.
••For iPhones, turn data off by going to
Settings → Cellular → Cellular Data.
3
Connect your smartphone to the wireless
router.
24
EN
••To verify the Wi-Fi connection, check that
Wi-Fi
icon on the control panel is lit.
••The appliance supports 2.4 GHz Wi-Fi
networks only. To check your network
frequency, contact your Internet service
provider or refer to your wireless router
manual.
••LG SmartThinQ is not responsible for any
network connection problems or any faults,
malfunctions, or errors caused by network
connection.
••If the appliance is having trouble connecting to
the Wi-Fi network, it may be too far from the
router. Purchase a Wi-Fi repeater (range
extender) to improve the Wi-Fi signal strength.
••The Wi-Fi connection may not connect or may
be interrupted because of the home network
environment.
••The network connection may not work
properly depending on the Internet service
provider.
••The surrounding wireless environment can
make the wireless network service run slowly.
••The appliance cannot be registered due to
problems with the wireless signal
transmission. Unplug the appliance and wait
about a minute before trying again.
••If the firewall on your wireless router is
enabled, disable the firewall or add an
exception to it.
••The wireless network name (SSID) should be
a combination of English letters and numbers.
(Do not use special characters.)
••Smartphone user interface (UI) may vary
depending on the mobile operating system
(OS) and the manufacturer.
••If the security protocol of the router is set to
WEP, you may fail to set up the network.
Please change it to other security protocols
(WPA2 is recommended) and register the
product again.
EN
Installing LG SmartThinQ
Search for the LG SmartThinQ application from
the Google Play Store or Apple App Store on a
smart phone. Follow instructions to download
and install the application.
NOTE
••If you choose the simple login to access the
LG SmartThinQ application, you must go
through the appliance registration process
each time you change your smartphone or
reinstall the application.
Using Dryer Cycle
Remote Start
Use a smart phone to control your appliance
remotely. You can also monitor your cycle
operation so you know how much time is left in
the cycle.
To Use Remote Start:
1
Press the Power button.
2
Put the laundry in drum.
••For appliances with the
or
logo
Communicate with the appliance from a smart
phone using the convenient smart features.
3
Press and hold the Remote Start button for
3 seconds to enable the Remote Start
function.
Dryer Cycle (Remote Start, Download
Cycle)
4
Start a cycle from the LG SmartThinQ
application on your smart phone.
Wi-Fi Function
Set or download any preferred cycle and
operate by remote control.
Smart Diagnosis™
This function provides useful information for
diagnosing and solving issues with the
appliance based on the pattern of use.
Push Alert
When the cycle is complete or the appliance
has problems, you have the option of receiving
push notifications on a smart phone.
Settings
Set the product nickname and delete product.
NOTE
••If you change your wireless router, your
Internet service provider or your password
after registering the appliance, please delete it
from the LG SmartThinQ Settings → Edit
Product and register again.
••The application is subject to change for
appliance improvement purposes without
notice to users.
••Functions may vary by model.
NOTE
••Once the Remote Start mode is enabled, you
can start a cycle from the LG SmartThinQ
smartphone application. If the cycle is not
started, the machine will wait to start the cycle
until it is turned off remotely from the
application or the Remote Start mode is
disabled.
••If the door is open, Remote Start is disabled.
To Disable Remote Start:
When Remote Start is activated, press and hold
the Remote Start button for 3 seconds.
Download Cycle
Download new and special cycles that are not
included in the basic cycles on the appliance.
Appliances that have been successfully
registered can download a variety of specialty
cycles specific to the appliance.
Only one cycle can be stored on the appliance
at a time.
Once cycle download is completed in the
appliance, the product keeps the downloaded
cycle until a new cycle is downloaded.
25
EN
Wireless LAN Module Specifications
Model
Frequency
Range
Output
Power(Max)
LCW-004
2412 to 2472 MHz
IEEE 802.11b:17.82 dBm
IEEE 802.11g:17.72 dBm
IEEE 802.11n:16.61 dBm
Wireless function S/W version : V 1.0
For consideration of the user, this device should
be installed and operated with a minimum
distance of 20 cm between the device and the
body.
Standby power
0.5 W
consumption
Network standby power
3.0 W
consumption
The period of time after
which the power
management function, or a
similar function, switches
the equipment automatically 20 min.
into standby and/or off
mode and/or the condition
providing networked
standby
Declaration of Conformity
Hereby, LG Electronics declares that the radio
equipment type Dryer is in compliance with
Directive 2014/53/EU. The full text of the EU
declaration of conformity is available at the
following internet address:
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service
Centre B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
26
Open Source Software Notice
Information
To obtain the source code under GPL, LGPL,
MPL, and other open source licenses, that is
contained in this product, please visit http://
opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers and
copyright notices are available for download.
LG Electronics will also provide open source
code to you on CD-ROM for a charge covering
the cost of performing such distribution (such as
the cost of media, shipping, and handling) upon
email request to opensource@lge.com. This
offer is valid for three (3) years from the date on
which you purchased the product.
Smart Diagnosis™ Using a Smart
Phone
••For appliances with the
or
logo
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails.
Smart Diagnosis™ can not be activated unless
the appliance is connected to power. If the
appliance is unable to turn on, then
troubleshooting must be done without using
Smart Diagnosis™.
EN
Using Smart Diagnosis™
4
Keep the phone in place until the tone
transmission has finished. Time remaining
for data transfer is displayed.
••For best results, do not move the phone
while the tones are being transmitted.
••If the call centre agent is not able to get
an accurate recording of the data, you
may be asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre agent, who will then be
able to assist you using the information
transmitted for analysis.
Smart Diagnosis™ Through the
Customer Information Centre
Use this function if you need an accurate
diagnosis by an LG Electronics customer
information centre when the appliance
malfunctions or fails. Use this function only to
contact the service representative, not during
normal operation.
1
Press the Power button to turn on the
appliance. Do not press any other buttons
or turn the programme selector knob.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close
to the Smart Diagnosis™ icon.
x.
Ma
mm
10
3
NOTE
••The Smart Diagnosis™ function depends on
the local call quality.
••The communication performance will improve
and you can receive better service if you use
the home phone.
••If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
Press and hold the
button for three
seconds, while holding the phone
mouthpiece to the icon and Power button.
27
MAINTENANCE
EN
WARNING
••Open the second lint filter.
••Remove the power plug when you clean the
appliance. Not removing the plug may result in
electric shock.
Cleaning the Lint Filter
Clean the lint filter before each drying cycle. It
should also be cleaned if the
icon becomes
illuminated and the buzzer sounds while the
appliance is in operation.
Cleaning the lint filter will reduce drying time
and energy consumption.
1
Open the door.
2
Remove the first lint filter.
3
5
Rinse away the lint under warm, running
water.
6
Dry the lint filters completely, close them
and reinsert both lint filters.
Remove the second lint filter.
NOTE
4
28
Open both lint filters and remove all the lint.
••Open the first lint filter.
••Remove moisture from the mesh. Otherwise,
the lint filter may be clogged due to water film
and the appliance may not operate.
••If the lint filter is not in the appliance, you can
not operate the appliance.
EN
Emptying the Water Container
Condensed water is collected in the water
container.
Empty the water container after every use. Not
doing so will affect the drying performance.
If the water container is full, the
icon glows
and the buzzer sounds while the appliance is
operating. If this should occur, the water
container needs to be emptied within the next
hour.
1
Cleaning the Cool Air Inlet
Grill
Vacuum the Cool Air Inlet grill 3 – 4 times a
year to make sure there is no build up of lint or
dirt that may cause improper air flow.
Pull out the water container.
NOTE
2
Empty the water container in the sink.
••Warm air is exhausted through the ventilation
grill.
••Adequate ventilation should be provided to
avoid the back flow of gases into the room
from units burning other fuels, such as open
fires.
Wiping the Moisture Sensor
This device senses the moisture level of the
laundry during operation, which means it must
be cleaned regularly to remove any build up of
lime scale on the surface of the sensor.
Wipe the sensors inside the drum.
3
Push it back into the appliance.
4
Press the Start/Pause button.
CAUTION
••Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a
rough sponge.
29
TROUBLESHOOTING
EN
The appliance is equipped with an automatic error-monitoring system to detect and diagnose
problems at an early stage. If the appliance does not function properly or does not function at all,
check the following before you call for service:
Diagnosing Problems
Symptoms
Appliance will not
turn on.
Appliance does not
heat.
Clothes take too long
to dry.
30
Reason
Solution
••Make sure that the plug is securely
plugged into a grounded outlet
matching the appliance’s rating plate.
•
•
Reset circuit breaker or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
•
•
Reset circuit breaker or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
••Separate heavy items from lightweight
items. Larger and heavier items take
Load is not properly sorted.
longer to dry. Light items in a load with
heavy items can fool the sensor
because the light items dry faster.
••Heavy fabrics take longer to dry
because they tend to retain more
moisture. To help reduce and maintain
Large load of heavy fabrics.
more consistent drying times for large
and heavy fabrics, separate these
items into smaller loads of a consistent
size.
••Use the appropriate control settings
for the type of load you are drying.
Appliance controls are not
Some loads may require an
set properly.
adjustment of the dry level setting for
proper drying.
••Remove the lint from the lint filter
before every cycle. With the lint
removed, hold the lint filter up to a
light to see if it is dirty or clogged.
Lint filter needs to be
With some loads that produce high
cleaned.
amounts of lint, such as new bath
towels, it may be necessary to pause
the cycle and clean the filter during
the cycle.
Power cord is not properly
plugged in.
EN
Symptoms
Clothes take too long
to dry.
Drying time is not
consistent.
Greasy or dirty spots
are left on clothes.
Reason
Solution
••Reset circuit breaker or replace fuse.
House fuse is blown, circuit
Do not increase fuse capacity. If the
breaker has tripped, or power
problem is a circuit overload, have it
outage has occurred.
corrected by a qualified electrician.
••Divide extra large loads into smaller
Appliance is overloaded.
loads for better drying performance
and efficiency.
••If you are drying a very small load,
add a few extra items to ensure proper
tumbling action. If the load is very
small and you are using Sensor Dry
Appliance is underloaded.
programmes, the electronic control
cannot properly sense the dryness of
the load and may shut off too soon.
Use Timed Drying programmes or add
some extra wet clothes to the load.
••The drying time for a load will vary
depending on the type of heat used
(electric), the size of the load, the type
Heat settings, load size, or
of fabrics, the wetness of the clothes,
dampness of clothing is not
and lint filter. Even an unbalanced
consistent.
load in the appliance can cause poor
spinning, resulting in wetter clothes
which will take longer to dry.
••When washing laundry that is to be
dried in the appliance, use the correct
Fabric softener is used
amount of fabric softener as
incorrectly.
recommended by the manufacturer of
the fabric softener.
••Use the appliance to dry only clean
Clean and dirty clothes are
items. Soil from dirty clothes can
being dried together.
transfer to the clean clothes in the
same or later loads.
••Stains on dried clothes could be stains
that were not removed during the
washing process. Make sure that
Clothes were not properly
clothes are being completely cleaned
cleaned or rinsed before
rinsed according to the instructions
being placed in the appliance. or
for your washing machine and
detergent. Some difficult soils may
require pre-treating prior to washing.
31
EN
Symptoms
Clothes are wrinkled.
Reason
Solution
Clothes have dried too long
(overdried).
••Over drying a load of laundry can lead
to wrinkled clothes. Try a shorter
drying time.
Clothes have been left in the
appliance for too long after
cycle ends.
••Use the Anti crease option.
••To avoid shrinking your clothes,
always consult and follow fabric care
instructions. Some fabrics will naturally
Garment
care
instructions
are
Clothes are shrinking. not being followed.
shrink when washed. Other fabrics
can be washed but will shrink when
dried in the appliance. Use a low or no
heat setting.
••Remove the lint from the lint filter
before every cycle. With the lint
removed, hold the lint filter up to a
light to see if it is dirty or clogged. If it
Lint filter has not been
looks dirty, follow the cleaning
cleaned properly.
instructions. With some loads that
produce high amounts of lint, it may
be necessary to clean the lint filter
during the cycle.
Lint is left on clothes.
••Some fabrics are lint producers (i.e., a
fuzzy white cotton towel) and should
Laundry has not been sorted
be dried separately from clothes that
properly.
are lint trappers (i.e., a pair of black
linen pants).
•
•
Divide extra large loads into smaller
Appliance is overloaded.
loads for drying.
Tissue, paper, etc., has been ••Check pockets thoroughly before
left in pockets.
drying clothes.
••Overdrying a load of laundry can
cause a buildup of static electricity.
Clothes have dried for too
Adjust settings and use a shorter
long (overdried).
drying time, or use Sensor Dry
Excess static in
programmes.
clothes after drying.
••These fabrics are naturally more prone
Drying synthetics, permanent
to static buildup. Try using fabric
press, or synthetic blends.
softener, or use shorter Timed Drying
time settings.
32
EN
Symptoms
Reason
The water container hose or
the drain hose is not
connected correctly.
Water leaks.
Clothes have damp
spots after a Sensor
Dry programme.
Your home appliance
and smartphone is
not connected to the
Wi-Fi network.
Solution
••Connect the water container hose or
the drain hose correctly.
••Check if laundry or foreign substance
is caught in the door before using the
appliance. If water leaks continuously,
contact the LG Electronics Customer
Information Centre.
••If items are too tightly packed or too
sparse the sensor may have trouble
reading the dryness level of the load.
Use a Timed Drying programme for
very small loads.
••Large, bulky items such as blankets or
comforters can sometimes wrap
themselves into a tight ball of fabric.
The outside layers will dry and register
Very large load or very small
on the sensors, while the inner core
load. Single large item such
remains damp. When drying a single
as a blanket or comforter.
bulky item, it may help to pause the
cycle once or twice and rearrange the
item to unwrap and expose any damp
areas.
••To dry a few remaining damp items
from a very large load or a few damp
spots on a large item after a Sensor
Dry programme has completed, empty
the lint trap, then set a Timed Drying
programme to finish drying the item(s).
•
•
Find the Wi-Fi network connected to
The password for the Wi-Fi
smartphone and remove it, then
that you are trying to connect your
register your appliance on LG
to is incorrect.
SmartThinQ.
•
•
Turn off the Mobile data of your
Mobile data for your
smartphone and register the appliance
smartphone is turned on.
using the Wi-Fi network.
••The wireless network name (SSID)
The wireless network name
should be a combination of English
(SSID) is set incorrectly.
letters and numbers. (Do not use
special characters.)
••Only a 2.4 GHz router frequency is
supported. Set the wireless router to
2.4 GHz and connect the appliance to
The router frequency is not
the wireless router. To check the router
2.4 GHz.
frequency, check with your Internet
service provider or the router
manufacturer.
••If the distance between the appliance
and the router is too far, the signal
The distance between the
may be weak and the connection may
appliance and the router is
not be configured correctly. Move the
too far.
location of the router so that it is
closer to the appliance.
The door is closed while
laundry or foreign substance
is caught in the door.
33
EN
Error Codes
Symptoms
Error code: tE1 through tE7
dE
dE4
Reason
Temperature sensor failure.
The door has been opened
while the appliance is in
operation or the appliance is
being operated without the
door being closed properly.
Door switch detection is not
working properly.
Solution
••Turn off the appliance and call
for service.
••Close the door completely.
••If dE is not released, call for
service.
••Unplug the power plug and
call for service.
tE1
tE2
tE3
tE4
tE5
Temperature Sensor has
malfunctioned.
••Unplug the power plug and
call for service.
F1
The temperature inside the
drum has risen suddenly.
LE1
The motor has stopped
suddenly.
••Unplug the power plug and
call for service.
••Check if the amount of
laundry exceeds the maximum
load.
••Unplug the power plug and
call for service.
LE2
AE
The compressor has stopped
suddenly.
••Unplug the power plug and
call for service.
The drain pump motor has
malfunctioned.
••Unplug the power plug and
call for service.
••The recommended
surrounding temperature for
installation is 5 - 35 °C.
OE
34
The surrounding temperature
for installation is below zero.
WARRANTY
EN
THIS LIMITED WARRANTY DOES NOT COVER:
••Service trips to deliver, pick up, or install or repair the product; instruction to the customer on
operation of the product; repair or replacement of fuses or correction of wiring or plumbing, or
correction of unauthorized repairs/installation.
••Failure of the product to perform during power failures and interruptions or inadequate electrical
service.
••Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines,
inadequate or interrupted water supply or inadequate supply of air.
••Damage resulting from operating the Product in a corrosive atmosphere or contrary to the
instructions outlined in the Product’s owner’s manual.
••Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts
of God.
••Damage or failure caused by unauthorized modification or alteration, or if it is used for other than
the intended purpose, or any water leakage where the product was not properly installed.
••Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or
industrial use, or use of accessories, components, or consumable cleaning products that are not
approved by LG.
••Damage caused by transportation and handling, including scratches, dents, chips, and/or other
damage to the finish of your product, unless such damage results from defects in materials or
workmanship.
••Damage or missing items to any display, open box, discounted, or refurbished Product.
••Products with original serial numbers that have been removed, altered, or cannot be readily
determined. Model and Serial numbers, along with original retail sales receipt, are required for
warranty validation.
••Increases in utility costs and additional utility expenses.
••Repairs when your Product is used in other than normal and usual household use or contrary to
the instructions outlined in the Product’s owner’s manual.
••Costs associated with removal of your Product from your home for repairs.
••The removal and reinstallation of the Product if it is installed in an inaccessible location or is not
installed in accordance with published installation instructions, including LG’s owner’s and
installation manuals.
••Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper
repair includes use of parts not approved or specified by LG.
••Noise or vibration that is considered normal, for example, water drain sound, spin sound or
warning beeps.
Filter is clogged.
- Not heating, long dry time
Clean the lint filter.
Improperly connected power
cord or electrical outlet issue.
- No power
- Not heating
Reconnect power cord, replace
house fuse or reset breaker. If
outlet is issue, electrician may
be required.
35
OPERATING DATA
EN
Product fiche_commission Delegated Regulation(EU) No 392/2012
Supplier’s name or trade mark
Supplier’s model identifier
Rated capacity in kg of cotton laundry for the standard cotton
programme at full load
Dryer type
Energy efficiency class
Energy consumption “X” kWh per year, based on 160 drying cycles
of the standard cotton programme at full and partial load, and the
consumption of the low-power modes. Actual energy consumption
per cycle will depend on how the appliance is used
Automatic tumble drier
Awarded an "EU Ecolabel" under Regulation (EC) No 66/2010
Energy consumption of the standard cotton programme at full load
(Edry)
Energy consumption of the standard cotton programme at partial
load (Edry1/2)
Power consumption of the off-mode for the standard cotton
programme at full load (Po)
Power consumption of the left-on mode for the standard cotton
programme at full load (Pl)
Duration of the left-on mode (Tl)
LG Electronics
RC7055*H** RC8055*H**
7 kg
8 kg
Condenser Household
Tumble Dryer
A++
A++
205.0 kWh/
year
230.0 kWh/
year
Yes
No
1.69 kWh
1.95 kWh
0.92 kWh
1.01 kWh
0.50 W
0.50 W
0.50 W
0.50 W
10 min
10 min
The ‘Cotton
+ Cupboard + Normal ’ used at full and partial load is the standard drying programme to
which the information in the label and the fiche relates, that this programme is suitable for drying
normal wet cotton laundry and that it is the most efficient programme in terms of energy
consumption for cotton.
The weighted programme time (Tt) of the ‘standard cotton
116 min
140 min
programme at full and partial load'
The programme time of the ‘standard cotton programme at full load’
155 min
179 min
(Tdry)
The programme time of the ‘standard cotton programme at partial
87 min
111 min
load’ (Tdry1/2)
Condensation efficiency class ‘X’ on a scale from G (least efficient)
A
A
to A (most efficient)
Average condensation efficiency Cdry of the standard cotton
91 %
91 %
programme at full load
Average condensation efficiency Cdry1/2 of the standard cotton
91 %
91 %
programme at partial load
The weighted condensation efficiency (Ct) for the ‘standard cotton
91 %
91 %
programme at full and partial load'
The sound power level
65 dB(A)
65 dB(A)
Free Standing
36
Memo
Memo
Memo
Download PDF

advertising