LG | RC7066B2Z | LG RC7066B2Z Owner’s Manual

Please read this manual carefully before operating
your dryer and retain it for future reference.
Big Capacity Drum
The Big Capacity drum on this LG Dryer allows you to dry your
washing in larger loads than ever before.
Lower Energy Consumption
LG dryers use less energy than conventional dryers due to the cuttingedge technology we have applied to the drying system and to the heat
control mechanism. This LG Dryer has been designed to save you money.
Reduced drying times
Drying times are now shorter due to the efficient air flow mechanism
and optimised heater on this LG Dryer.
Reduced noise levels
We have reduced the operating noise of this LG Dryer by using
innovative sound-absorbing and noise-screening technologies, making
it much quieter than conventional dryers.
Easy of Use
The wide, electronically controlled LED display on this machine
is very easy to use. Simply select the programme you require
and your LG Dryer will do the rest.
Safety Instructions ...............3
Using SmartDiagnosisTM .....29
Installation Instructions ........6
Technical Data .....................30
Appearance & Design .........10
Warranty ...............................31
Operating Your Dryer ..........11
Additional Functions...........17
Caring for Your Dryer..........19
Additional Tips for
Smart Use.............................22
Guidelines ............................27
Safety Instructions
For your safety, the information in this manual must be followed to minimise the risk of fire or
explosion, electric shock, or to prevent property damage, personal injury or death.
• Serious injury or death may occur when not observing the following rules.
• It is strictly forbidden to use the product for anything other than the manufacturer
authorised usage. LG doesn't take full responsibility for the damage by inaccurate and
improper usages.
• Do not repair or replace any part of the dryer or attempt any servicing unless specifically
recommended in the user-maintenance instructions or published user-repair instructions
that you understand and have the skills to carry out.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
For use in Europe:
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless
continuously supervised.
• Before plugging in the power cord, make sure cord is earthed and connected to circuit breaker.
No earthing may cause breakdowns or an electric shock.
• Do not plug into an adaptor. Do not use with an extension lead.
Abnormal heating of outlet may cause a fire.
• Do not remove the top plate when installing the dryer.
• Do not modify this product.
May cause breakdown, fire or electric shock.
• Keep the dryer away from cookers, naked flames, or any other inflammable objects.
May cause fire or parts to melt.
• Do not use a damaged power cord or place heavy objects on the cord.
A damaged power cord may cause fire or electric shock.
Safety Instructions
• Do not touch the plug or switch on with wet hands.
May cause electric shock.
• Disconnect the power cord by grasping the plug, not the cord.
May cause damage of cord resulting in fire or electric shock.
• Wipe dirt and stains from the power cord and insert the plug firmly into the socket.
Dirt and poor connections may cause fire.
• Do not use if power cord, plug or socket is damaged.
May cause fire or electric shock.
• Do not install or store the dryer where it will be exposed to the weather.
May cause fire, electric shock or malfunction.
• Do not use an extension cord or an adaptor to connect the power cord.
May cause fire or electric shock.
• Do not splash water on to the dryer.
May cause fire or electric shock.
• Unplug the power cord when cleaning or not using the dryer.
Water or dirt may cause an electric shock.
• Do not allow children or pets to play on or inside the dryer.
• The appliance is not intended for use by young children or infirm people without supervision.
• Keep pets away from the dryer.
Pets may damage the dryer, or may receive an electric shock.
• Do not depress buttons using sharp implements such as knives and screwdrivers.
May damage the dryer or cause electric shock.
• Do not dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible
or explosive substances (such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.).
May cause fire or explosion.
• Do not place flammable items near the dryer.
May cause toxic gases, parts damage, fire or explosion.
• Before the appliance is removed from service or discarded, disassemble the door and cut off the
power cord to prevent the future use.
May cause accident and injury.
• The packaging is not a toy. Destroy after opening.
To avoid the possibility of suffocation, keep the packaging away from babies and children.
• If this appliance is supplied from a cord extension set or an electrical connector, the portable
outlet device must be positioned so that it is not subject to splashing or moisture.
It may cause an electric shock, a fire, malfunction or deformation.
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and
should not be placed in a tumble dryer.
• Items
that have been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and
wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Items that have been previously cleaned in, washed in, soaked in or spotted with petrol/gasoline,
dry cleaning solvents or other flammable or explosive substances should not be used in a tumble
May cause spontaneous combustion leading to explosion and fire.
Safety Instructions
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom rugs,
nonslip mats or raincoats) should not be dried in a tumble dryer on a heat setting.
• Items
such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with foam
rubber pads should not be dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Plastic articles such as shower caps or waterproof nappy covers should not be placed in a tumble
May cause spontaneous combustion leading to explosion and fire.
• If dryer is installed on a carpet, damage may be caused to it by ventilated air.
May cause spontaneous combustion leading to explosion and fire.
• Fabric
softeners, or similar products, should be used as specified by the
fabric softener instructions.
• The tumble dryer is not to be used if industrial chemicals have been used
for cleaning
• Remove all objects from pockets such as lighters and matches.
• Fabric softeners, or similar products, should be used as specified by the fabric softener
• To reduce the risk of personal injury, adhere to all industry recommended safety procedures
including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property damage,
personal injury or death.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a lockable
door, a sliding door or a door with a hinge on the
opposite side to that of the tumble dryer, in such a way
that a full opening of the tumble dryer door is
• Do
not dry unwashed items in the tumble dryer.
stop a tumble dryer before the end of the drying cycle unless all
items are quickly removed and spread out so that the heat is dissipated.
• The lint trap has to be cleaned frequently, if applicable.
• Lint must not to be allowed to accumulate around the tumble dryer.
• Filter must be cleaned after every cycles are completes.
• Never
Installation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the
preparation and use of your dryer, and it is important that you review this entire manual
before proceeding with any installation or use. Be sure to observe all listed warnings and
cautions. These installation instructions are intended for use by qualified installers. Read
these installation instructions completely and carefully.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t
try to lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the
door, they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or
Check the dryer for damage occurred
during transportation.
Do not connect the dryer if it has visible
signs of damage.
If you are not confident, contact your local
LG agent. Always empty the dryer
completely before transporting it.
Your dryer should not be located near to a
gas hob, cooker, heater or grill, as flames
from the burners could damage your dryer.
When the dryer is fitted beneath a work
surface, allow 30cm~50cm space at either
side of the dryer and at the back of the dryer
to allow air to exit the rear grille. This air
flow is critical for condensation of water
during the drying process.
If you use this dryer near or stacked on top
of your washing machine, separate main
plugs and sockets must be used for each
appliance. Do not use 2-way adaptor or
extension lead.
You can stack the dryer on top of your
washing machine to save space. A stacking
kit is available from your local appliance
■ Stacking Installation Instructions
Your LG dryer can be placed on top of a front loading washing machine and securely fixed
with a stacking kit (see following page for instructions). This installation must be conducted
by an experienced installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing
machine and will ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulations are
dangerous. Any of these could result in an electric shock or fire. Periodically examine
the cord of your appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, trapped in a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
Installation Instructions
Stacking Kit
In order to stack this dryer an LG stacking
kit is required.
This dryer may only be stacked on top of an
LG washer. Do not attempt to stack this
dryer on any other washer, as damage,
injury or property damage could result.
• Incorrect installation can cause serious
• The weight of the dryer and the height
of installation makes the stacking
procedure too risky for one person.
This procedure should be performed by
2 or more experienced service
• The dryer is not suitable for a built-in
installation. Please do not install as a
built-in appliance.
• Do not operate if the dryer is
3. Align the stacking kit holes and the rear
cover holes.
3-1) 23.6 inch(600mm)
Washer Top plate size
21.7 inch
23.6 inch
Installation Procedure
1. Place the LG dryer on the LG washing
2. Remove the two screws from the bottom
of the rear cover on each side as
illustrated below.
3-2) 21.7 inch(550mm)
• Fasten the 2 screws that were removed
earlier from dryer to stacking kit.
• Use 4 screws in accessory box
[0.6inch(16mm)] to assemble washer rear
cover and stacking kit.
• The procedure for the opposite side will be
the same.
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with an earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local standards.
- For better drying performance,
please keep the rear of product
away from the walls.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumble dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
The dryer should not be installed next to
a refrigeration appliance.
Do not install the dryer next to a
high-temperature appliance, such as
a refrigerator, oven or stove etc,
which can affect drying performance
and duration.
The dryer works best at a room
temperature of 23°C.
Avoid installing the product around a
heat source.
The warm air venting from the rear side
of the dryer must be well ventilated.
If not, this can bring on problems.
Installation Instructions
■ Level the Dryer
1. Levelling the dryer prevents undesirable
noise and vibration. Place your dryer on a
solid, level floor.
Place the dryer in an area free from
flammable materials, condensation and
not liable to freezing.
2. If the dryer is not properly level, adjust
the front levelling legs as necessary.
Turn them clockwise to raise and
counter-clockwise to lower until the dryer
no longer wobbles, both front-to-back,
side-to-side and corner-to-corner.
Adjustable Feet
Dryer is raised
Dryer is lowered
Diagonal Check
When pushing down the edges of the
machine, the machine should not move up
and down at all.
(Please check both directions)
If the machine rocks when pushing the
machine top plate diagonally, adjust the feet
Appearance & Design
■ Product Layout
- RC7066***
Air Ventilation
■ Control Panel
SmartDiagnosis™ function is
available only for the products
with a SmartDiagnosis™ mark.
• Time Delay
• Anti Crease
• Favorite
• Buzzer
Cycle selector
• Option
• Spin Speed
• Dry Level
(*Child Lock)
• Drum Light
Operating Your Dryer
■ Cycle Selection Table
Sensor Dry Cycle
Laundry Type
Towels, dressing gowns
and bed linen
For thick and quilted fabrics
Terry towels, tea towels,
towels and bed linen
For thick and quilted fabrics that
do not need to be ironed
Bath towels, tea towels,
underwear and cotton socks
For fabrics that do not need to be
Sheets, pillowcase and
For fabrics that do not need to be
Bed linen, table linen, towels,
T-shirts and polo shirts
For fabrics that do need to be
Bed linen, table linen,
tracksuits, anorak and
For thick and quilted fabrics that
do not need to be ironed
Shirts and blouses
For fabrics that do not need to be
Trousers, dresses, skirts
and blouses
For fabrics that do need to be
Shirts, T-shirts, trousers,
under wear and socks
For polyamide, acrylic, and
polyester that do not need to be
Shirts, T-shirts, under
wear, anoraks and socks
For polyamide, acrylic, polyester
that do need to be ironed
Operating Your Dryer
Sensor Dry Cycle
Laundry Type
Bulky Item Bed clothes, sheets
For bulky items
Linen and towels, excluding
Quick Dry fabrics applied to Delicate,
Sports wear, Wool and Bulky
Item course.
For small loads of suitable fabrics
with short drying times
pillowcase and
Skin Care T-shirts,
For cotton fabrics which do not
need to be ironed
(Refer to
the Note)
Shirts and blouses
Odor removal of fabric
(For fabrics in need of odor
Soccer kit and training wear
For polyester material
Jeans and Colour fading
For jeans which do not need to be
Silk, fine fabrics and lingerie
For fabrics that are heat-sensitive
like synthetic.
For wool fabrics
Timed Drying Cycle
Rack Dry
Silk, wool, delicate lingerie
Refresh clothes without tumble
Cool Air
All fabrics that need
Tumbles without heat
Warm Air
Bath towels, bath robes,
dishcloths and quilted fabrics
made of acrylic
Small items & damp clothing
Everyday items suitable for heat
When using the “Refresh” course, please spray cold or warm water on the fabric
for a fresher outcome. (The recommend amount is 20cc of water per shirt.)
If the load is less than 1kg, please use “Warm Air” Cycle in timed drying Cycle.
Wool items should be dried using “Wool” Cycle and heat-sensitive fabrics including silk,
underwear and lingerie should be dried using “Delicates” Cycle. Please comply with the
recommended laundry load when you select your desired cycle - found on page 22,23.
Otherwise, your clothes may be damaged.
Operating Your Dryer
■ Please read before using your LG dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG
dryer is correctly installed and ready for use. (See installation instructions.)
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG
dryer until the machine is balanced.
2. Check the water container, filter, control panel and drum to make sure everything is in
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any
odours from the interior of the LG dryer to disperse.
The final part of a tumble dryer cycle occurs without heat (cool down cycle) so that
the items are left at a temperature to ensure that the items will not be damaged.
Turn the
power on.
1. Turn the power on.
First, press the ‘‘Power’’ button. The
indicator light above the button will
become illuminated indicating that the
machine is all set to run.
2. Open the door.
3. Check the filter and water container
are clean.
The filter is inside the door rim or in the
back of the door. It needs to be cleaned
before and after drying.
Open the door and check the filter is
clean. If not, please clean it referring to
page 19. Also check if the water
container need to be emptied for better
drying results.
4. Place laundry into the drum after
The clothes should be sorted by fabric
type and dryness level and all the strings
and belts of clothes should be well tied
and fixed before being put into the drum.
Push the laundry to the back to keep it
away from the door seal.
If not, the door seal and clothes may be
Open the
Glass Door Opaque Door
Check the
Operating Your Dryer
5. Close the door.
Before you close the door, make sure
fabrics are well placed inside and that
foreign objects, especially flammable
ones, are not caught around door.
Be careful not to trap laundry between
the loading door and rubber seal.
Glass Door Opaque Door
6. Select the drying cycle you want.
You can choose a cycle by turning the
cycle selector knob until the required
cycle is indicated.
If you press Start/Pause button without
choosing a cycle, the dryer will proceed
with the Cupboard cycle. Please refer to
Cycle Selection table (page 11,12) for
detailed information.
Select the
7. Press the start button.
You will hear the drum rotating.
Take out
the laundry.
8. After the cycle has finished, open the
door and remove the laundry.
Be careful! The drum inside could still be
(Operation time varies depending on your
cycle selection or options.)
Operating Your Dryer
The final part of a tumble dryer cycle
occurs without heat (cool down
cycle) to ensure that the items are left
at a temperature that will not damage
Clean the
the filter if it is
9. Clean the filter and empty the water
The filter should be cleaned after each
10. Turn off the dryer.
Press the ‘‘Power’’ button.
- Take care if using a vacuum cleaner to
clean the filter, as it is easily damaged
and torn. If there is a residue build up
on the filter, scrub the filter with a brush
to remove.
- If you want to open the door while the
dryer is operating, please press the
Start/Pause button first, wait until the
drum completely stops and then open
the door.
This dryer must not be used for
purposes other than those for which it
was designed.
Operating Your Dryer
■ Rack Dry
( depending on the model )
The drying rack is placed inside the dryer as
seen in the picture below. Remove and
discard packing material before use.
The Rack Dry is designed for use with items
that you do not want to tumble dry including
sweaters and delicate fabrics.
To use the Drying Rack :
1. Open the door.
Check the lint filter and remove any lint
accumulated from items dried on the
1. Insert wire
edge to the
2. Do not remove the filter.
3. Place drying rack over the bottom of
the dryer door opening.
Reset the rack on the dryer back
Push down on the frame front to
secure over filter.
4. Place wet items on top of the rack.
Allow space around items for air to
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
2. Place
fabrics or
Additional Functions
- RC7066****
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Cycle selector
• Cycles are available according to the
laundry type.
• The lamp will light up to indicate selected
Additional program
Additional program
• Use these buttons to select the desired
options for the selected cycle.
• This allows you to select additional options
and will light up when selected.
• This Start/Pause button is used to start the
dry cycle or pause the dry cycle.
• Press the Start/Pause button to stop the
cycle temporarily.
• When in Pause, the power is turned off
automatically after 4 minutes.
Additional Functions
■ Time Delay
■ Option
You can use the Time Delay option to delay
the finishing time of drying cycle.
Maximum Time Delay is 19 hours.
Minimum Time Delay is 3 hours.
1. Turn the dryer on.
2. Select a cycle.
3. Set time delay hour by pressing the
“ ”, “ ” button.
4. Press Start/Pause button.
Hand Iron
This function remains more moist than the
condition for ironing.
■ Anti Crease
The Anti Crease option prevents creases
that are formed when the laundry is not
unloaded promptly at the end of the drying
cycle. When Anti Crease is selected, the
dryer repeatedly runs and pauses, giving
you 2 hours to unload the laundry. If the
door is opened during the Anti Crease
option, the option is cancelled.
Mixed Fabric
Easy Care
Favorite option allows you to store a
customised dry cycle for future use.
1. Turn the dryer on.
2. Select a cycle.
3. Select the option or additional program.
(Anti-Crease, Spin Speed etc.)
4. Press and hold Favorite option button for
3 seconds.
The Favorite option is now stored for future
use. To reuse the stored cycle, select
Favorite option and press the Start/Pause.
Hand Iron is
Damp Dry Beep
This function lets you know when the
clothes are ready for ironing.
■ Favorite
Dry Level
Mixed Fabric
Easy Care
Dry Level
Extra / Very
Cupboard / Light
Very / Cupboard
■ Child Lock (
Damp Dry
Beep is
■ Drum Light
For the safety of children, press Dry Level
button for about 3 seconds.
Whilst the dryer is running it is possible to
You will see “
” indication on the LED.
see inside the drum if you select the Drum
You can see “
” sign on LED window.
Light function.
- All controls except Child Lock and Power
- Light on : Door is opened.
- Light off : Door is closed. Off automatically. buttons will be disabled.
- Child Lock continues after the end of
■ Spin speed
This additional program is able to control
drying time, allowing you to select high or
normal. (Default option is normal.)
- High : When washing dehydration
proceeds from more than 1,200 rpm.
- Normal : When washing dehydration
proceeds from less than 1,000 rpm.
Spin RPM is based on the LG Washing
To turn the Child Lock off, press Dry
Level button for about 3 seconds.
■ Buzzer
This is an option to enable you to adjust
volume of beeper sound.
Caring for Your Dryer
Care and Cleaning is Very Important
It’s not difficult to care for your dryer but it is
important that you do care for it. Follow the
instructions below.
Clean Filter
Clean the filter after each use and check it
before each use. It should also be cleaned if
the ‘‘Clean Filter’’ light becomes illuminated
and the buzzer sounds whilst the dryer is in
Cleaning or emptying the filter will reduce
drying times and energy consumption and
lengthen the dryer life.
1. Open the door.
Empty Water Container
Condensed water is collected in the water
Empty the water container after every
Not doing so will affect the drying
If the water container is full, the “Empty
Water” lamp glows and the buzzer sounds
while the dryer is operating. If this should
occur, the water container needs to be
emptied within the next hour.
1. Pull out the water
2. Pull the filter out.
3. Clean the filter by
using a vacuum
cleaner or rinsing
under the tap.
4. Replace the filter.
- Push the filter all
the way down to
avoid interference
with the door.
5. Close the door.
- After washing the filter please dry
- Lint must not be left to accumulate
in the dryer.
If “Clean Filter” symbol is
displayed during the operation,
clean the filter promptly.
1.Cool the dryer down and follow the above
2.Press the Start/Pause button.
2. Empty water
container in the
3. Push it back.
4. Press the
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
Do not drink the condensed water.
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, LED window may
display “
” (Empty water symbol) and
the may stop because the water
container is full.
Caring for Your Dryer
The condenser is also a very important part for efficient drying performance result so it
needs special care from you. It is recommended that the condenser be cleaned three or
four times a year or when the condenser clean lamp blinks.
1. Push the cap and open the condensing
4. Clean the condenser thoroughly under a
tap, letting the water flow through
< Front >
Condensing cover
2. Open seal by turning the locking lever
< Side >
5. Put everything back together by following
the instructions in reverse order
3. Pull the condenser out by inserting a
finger into the tab at the front of the
condenser. (Don’t force the condenser)
The locking lever must be closed after
cleaning the condenser as below.
If the “Clean Condenser” symbol
is displayed, clean the condenser
- Operating when the condenser is
clogged with lint can damage the dryer.
This also increases energy
- Do not use sharp objects to clean the
heat exchanger. This could cause
damage and leaking.
- Never operate the dryer without the
heat exchanger.
Caring for Your Dryer
■ Ventilation Grill and Cool Air
Inlet Grill
3. Connect
drain hose
to the kit.
Vacuum the front ventilation grill 3-4 times a
year to make sure there is no build up of lint
or dirt that could cause improper air flow.
■ Moisture Sensor?
- Warm air is exhausted through the
ventilation grill.
- Adequate ventilation has to be
provided to avoid the back flow of
gases into the room from appliances
burning other fuels, including open
The device senses the moisture level of the
laundry during operation, which means it
must be cleaned regularly to remove any
build up of lime scale on the surface of the
sensor. Wipe the sensors inside drum (as
■ Condensed Water Drain-out
Normally, condensed water is pumped up to
the water container where water is collected
until manually emptied.
Water can also be drained out directly to a
mains drain, especially when the dryer is
stacked on top of a washing machine. With
a connecting kit for a mains drain hose,
simply change the water path and reroute to
the drainage facility as below:
1. Take
kit out.
2. Separate
hose from
the kit.
Additional Tips for Smart Use
■ Drying Guide & Energy consumption
Capacity of
Easy Care
7 kg
125 min
115 min
7 kg
120 min
110 min
7 kg
7 kg
115 min
103 min
105 min
93 min
7 kg
97 min
87 min
3.5 kg
53 min
43 min
3.5 kg
48 min
38 min
3.5 kg
41 min
31 min
3.5 kg
58 min
38 min
3.5 kg
51 min
31 min
2 kg
60 min
Bulky Item
Display Drying Time
(Including Cooling Time)
3 kg
36 min
Skin Care
4.5 kg
118 min
1.5 kg
20 min
Sports Wear
2 kg
24 min
Quick Dry
3 kg
50 min
1.5 kg
45 min
1 kg
21 min
Additional Tips for Smart Use
Dry woollens on “wool’’ cycle. Be sure to
follow fabric care label symbols, first. Wool
is not completely dried from the program so
don't repeat drying. Pull woollens to their
original shape and dry them flat.
Below are fabric care labels.
Tumble dry
Woven and Loopknit Materials
Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press /
Wrinkle resistant
Permanent Press and Synthetics
Do not overload your dryer. Take out
permanent press items as soon as the dryer
stops to reduce creases.
Do not tumble dry
Baby Clothes and Night Gowns
Always check the manufacturer’s
Medium heating
Rubber and Plastics
Do not dry any items made from or
containing rubber or plastics such as:
No heat / air
a) Aprons, Bibs and Chair Covers
b) Curtains and Table Clothes
c) Bathmats
Gentle / Delicate
Do not dry
High heating
Low heating
Line Dry / hang to dry
Drip dry
Dry flat
In the shade
Do not dry fibreglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
Fabric Care Labels
Clothes have their own wash care labels, so
drying according to the wash care label is
Not only that, the laundry must be sorted
according to size and fabric type.
For the best drying performance and most
efficient energy usage, do not overload the
Additional Tips for Smart Use
■ Product Specification
Rated Capacity
Dryer Type
Energy Efficiency Class
Annual Energy Consumption (AEc)
Automatic Tumble Dryer
EU Ecolabel Award
Power Consumption at Full Load
-. Off-mode (Po)
-. Left-on mode (PI)
Duration of Left-on mode
Standard Cotton Program
Drying Time (Tt)
-. Tdry
-. Tdry1/2
Condensation Efficiency Class
-. Cdry
-. Cdry1/2
Sound Power Level
LG Electronics
Condenser Household Tumble Dryer
Cotton Cupboard Normal
Additional Tips for Smart Use
Estimated Performance
Dry Level
Load Content
Cotton /
Cotton 100%
Cotton 100%
Capacity Energy Drying
Efficiency Time
(PI)(W) (Po) (W)
• Tested in accordance with EN61121 and Directive 932/2012
• Set program at "Cotton Cupboard Normal (Full & Half Load)" for test in accordance in
conformity with EN61121 and Directive 932/2012
- Standard Cotton program : Cotton
+ Cupboard + Normal (Default)
(This is the most efficient programme in terms of the test conditions proposed by
EN61121 and Directive 932/2012)
• Information about the ‘standard cotton programme’ specifies that it is suitable to dry
normal wet cotton laundry and that it is the most efficient programme in terms of
energy consumption for drying wet cotton laundry.
• The test results depend on room temperature, type and amount of load, water
hardness and water inlet temperature.
• If product is installed as built under, it may cause performance degradation.
Additional Tips for Smart Use
■ Spare Parts
■ Accessory Parts
Spare parts that are required under the
terms of warranty are provided free of
charge. If the warranty has expired then
spare parts must be purchased from the
service centre.
• Accessories available for this product
( depending on the model )
1. Condensing Drain Hose and Hose
Holder (Purchased Separately)
■ Disposal of the Dryer
It is requested that you dispose of your
dryer safely to protect children and others
from possible injury.
The door, lid and other protruding parts
must be removed and the power cord
should be cut off before safe disposal.
2. Dryer Rack ( Purchased Separately )
■ Service Contact
If there is a problem with your dryer, first
consult the Trouble Shooting Guide. If you
cannot find the error and you are unable to
resolve the problem, please contact the
Service centre.
3. Stacking Kit ( Purchased Separately )
A Customer Service representative will ask
you the following questions:
1. Name, address and postcode
2. Phone number
3. Description of problem
4. Model number and serial number of your
5. Date of Purchase
Holder : 2EA, Screw : 4EA
• The stacking kit can be used for washer
top plate size 550mm and 600mm for
If stacking is needed, you must stack
the dryer upon an LG washing
A stacking kit is sold separately.
Troubleshooting Guidelines
■ Troubleshooting Tips
To save you time and money, the following page will help answer your questions before a
service call.
What to do
Dryer won’t run
1. Check dryer is plugged in.
2. Check "Start" button is pressed.
3. Check door is properly closed.
4. Check room temperature is not below 5°C
5. Check a fuse is not blown or the circuit breaker is
tripped and replace them.
(Caution : electric dryers generally use two fuses or
breakers) After emptying the water container and
Cleaning filter during operation, you must press the
start button, then the dryer operates again.
It takes a long time
to dry
1. Filter should be cleaned after each load.
2. Check water container is emptied.
3. Check cleanliness of condenser.
4. Select correct programme setting for fabric type
5. Check air ventilation grill or rear vents of dryer are not
6. Check clothes are not excessively wet
7. Check the dryer is not overloaded
1. Check filter is clean
2. Check condenser unit is not clogged.
Clothes are covered
in Fluff
1. Check lint filter is empty
2. Check all the items in the dryer are clean
3. Check all the laundry has been correctly sorted by
fabric type
4. Check laundry is not overloaded
5. Check if there is any paper, tissues or other
degradable items amongst the laundry and remove.
The drying time is
not consistent
The drying time for a load will vary depending on the
heat setting, the size of the load, the type of fabrics, the
wetness of the clothes and the condition of the lint filter.
Water is leaking
Check if the door or seal cover is dirty or damaged.
The clothes are
Check the laundry is not overloaded. Try a shorter drying
time and remove items whilst they still retain a slight
amount of moisture. Use the anti-crease function
The garments have shrunk
To avoid shrinkage, please follow the care and use
instructions for your garment, as some fabrics shrink
naturally when washed and other fabrics should not be
placed in a dryer.
Troubleshooting Guidelines
■ Error Mode
: The door must be closed and the Start/Pause button must be pressed for
re-operation.If error message continues to occur, unplug the power cord and
call the service centre for advice.
: If error message continues to occur, unplug the power cord and call the service
centre for advice.
■ Drum light does not work
• Contact the customer service centre.
Using SmartDiagnosis™
SmartDiagnosis™ function is
available only for the products with a
SmartDiagnosis™ mark.
In case of a mobile phone with static
option, the smart diagnosis function
might not operate.
■ Using SmartDiagnosis™
• Only use this feature when instructed to do
so by the call centre. The transmission
sounds similar to a fax machine, and so
has no meaning except to the call centre.
• SmartDiagnosis™ cannot be activated if
the dryer does not power up. If this
happens, then troubleshooting must be
done without SmartDiagnosis™. If you
experience problems with your dryer, call
the Customer information centre.
Follow the call centre agent's instructions,
and do the following steps when requested:
1. Press the Power button to turn on the
dryer. Do not press any other buttons or
turn the cycle selector knob.
Max. 10 mm
3. Press and hold the “More Time” button
for three seconds, while holding the
phone mouthpiece to the icon or Power
4. Keep the phone in place until the tone
transmission has finished.
The display will count down the time.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get
an accurate recording of the data, you
may be asked to try again.
5. Once the countdown is over and the
tones have stopped, resume your
conversation with the call centre agent,
who will then be able to assist you using
the information transmitted for analysis
during your call to the Customer
information centre.
2. When instructed to do so by the call
centre, place the mouthpiece of your
phone very close to the Power button.
“Smart Diagnosis is a troubleshooting
feature designed to assist, not
replace, the traditional method of
troubleshooting through service calls.
The effectiveness of this feature
depends upon various factors,
including, but not limited to, the
reception of the cellular phone being
used for transmission, any external
noise that may be present during the
transmission, and the acoustics of the
room where the machine is located.
Accordingly, LG does not guarantee
that Smart Diagnosis would accurately
troubleshoot any given issue.”
Technical Data
850 mm
60 in.2
(387 cm2)
60 in.2
(387 cm2)
640 mm 1”
(61.0 cm)
(2.5 cm)
(2.5 cm)
600 mm
Closet Door Vent
Weight : 43.7kg, Opaque Door
45.1kg, Glass(Cr) Door
■ Electrical Requirements
■ Ventilation Requirement
230 V
50 Hz
Ensure you connect the dryer to the correct
electricity voltage. The ratings plate on your
dryer shows you what the voltage should
Alcove or
Ensure air flow
of 112 cu.ft./min
through dryer
Closet door must have
2(louvered) openings,
each having a
minimum area of 60
sq. inches (387 sq.cm),
located 3 inches (8 cm)
from bottom and top of
Disposal of your old appliance
1. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
2. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
3. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.
• When disposing of the appliance, cut off the mains cable, destroy the plug and
disassemble the door to prevent anything from being trapped inside.
■ What is not covered
• Service trips to your home to teach you how to use the product.
• If the product is connected to any voltage other than that shown on the rating plate.
• If the fault is caused by accident, neglect, misuse or Act of God.
• If the fault is caused by factors other than normal domestic use or use in accordance with
the owner's manual.
• Provide instruction on use of product or change the set-up of the product.
• If the fault is caused by pests for example, rats or cockroaches, etc.
• Noise or vibration that is considered normal, for example water drain sound, spin sound,
or warning beeps.
• Correcting the installation. For example, levelling the product, adjustment of drain.
• Normal maintenance which is recommended by the owner's manual.
• Removal of foreign objects / substances from the machine, including the pump and inlet
hose filter, For example, grit, nails, bra wires, buttons etc.
• Replace fuses in or correct house wiring or correct house plumbing.
• Correction of unauthorised repairs.
• Incidental or consequential damage to personal property caused by possible defects with
this appliance.
• If this product is used for commercial purpose, it is not under warranty.
(Example : Public places such as public bathroom, lodging house, training centre,
If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be borne
by the owner.
For U.K. Customer
CUSTOMER SERVICE Tel : +44- (0) 844 847 5454
: +44- (0) 844 847 1413
LGEUK SERVICE WEB-SITE : http://uk.lge.com
Download PDF