LG | WD-12331AD | LG WD-12331AD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3040P
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-14331(6)AD
WD(M)-12331(6)AD
WD-14335AD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
More economical
by Intelligent
Wash
System
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy
and water consumption.
Intelligent
Wash
Child-Lock
The child-lock system is to be used for preventing children from
button to change the program during operation.
Low noise
speed
pressing
any
control system
By sensing the amount of
the spinning noise level.
load and balance, it
evenly distributes
load to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
case
of power failure.
System
The advanced Brushless DC motor rotates the drum
directly without
belt and
pulley.
C
ontents
Warnings....................................................................................3
Installation..................................................................................4
Specifications.............................................................................5
Installation..................................................................................6
Care before
washing................................................................12
Adding detergent
.....................................................................13
Function ...................................................................................14
How to
use
washer ..................................................................15
Maintenance ............................................................................24
Troubleshooting guide
Terms of
2
.............................................................27
Warranty ...................................................................30
W
arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
?
?
lint, paper, rags, chemicals,
etc.
Close supervision is necessary if this
appliances is used by or near children
?
?
or
Keep washer away from fire.
?
Do not leave the washer door open.
An open door could entice children to
?
?
or
dry articles that have been
cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances
(such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) which
may ignite or explode.
To avoid such a result, carefully follow the
or
on
crawl inside the washer.
Never reach into washer while it is
moving.
Wait until the drum has completely stopped.
The laundry process can reduce the flame
or
try to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
disconnect the washer at the household
distribution
?
hang
care
Do not slam the washer door closed
or
.
?
Do not wash
force the door open when locked. This could
result in damage to the washer.
infirm persons. Do not allow them to play on,
with, or inside this or any other appliance
the door
using
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
as
to persons when
garment manufacturer's wash and
published user-repair
instructions that you understand and have the
skills to carry out.
?
?
Do not tamper with controls.
Do not repair or replace any part of the
washer
or
injury
precautions, including the following:
to the weather.
exposed
or
?
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
dryer is intend only for drying textile material
in water.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
WARNING :
Improper
shock. Check with
outlet, consult
connection of the
an
electrician.
equipment-grounding conductor
can
result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
a
-
3
I
nstallation
To minimize the risk of fire in
?
a
tumble
dryer,
the
following
spotted or soaked with vegetable
not be placed in a tumble dryer.
Items that have been
hazard and should
Oil-affected items
sources
Such
as
or
should be observed:
cooking
oil constitute
ignite spontaneously, especially when exposed
tumble dryer. The items become warm, causing
can
in
a
a
fire
to heat
an
oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enought to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and
so
create a fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
?
?
?
?
previously cleaned in, washed in, soaked in or spotted with
petro/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
Items that have been
Items
foam) or similarly testured
rubber. like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
containing
foam rubber
(also
known
as
latex
products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
Fabric softeners
Undergarments
dryer.
or
similar
that contain metal reinforcements should not be
placed
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
rubber-coated tennis shoes should not be placed in a tumble
4
in
pillows, galoshes
dryer.
and
S
pecifications
Name
:
Front
:
220-240 V~,50 Hz
Size
:
600mm(W)
Weight
:61kg
Power
Wash
supply
capacity/Max.
Dry capacity/Max.
Water
Watt
Watt
:
7
:
3.5
550mm(D)
x
850mm(H)
kg (1350W)
(22
Permissible water pressure
:
0.3-10
Spin speed
:
No
The appearance and
x
machine
kg (2100W)
:154
consumption
loading washing
kgf/
/kg)
(30-1000 kPa)
Spin/400/600/800/1000/1200/1400 [WD(M)-14331(6)AD/WD-14335AD]
No Spin/400/600/800/1000/1200 [WD(M)-12331(6)AD]
specifications
may be varied without notice to raise the units
quality.
Accessories
Inlet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
5
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove
(Packing support may not
be used depending on
models.)
Packing
the bolts
along
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future
with the rubber
use.
bungs.
?
If
they
heavy
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
6
supplied.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
I
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
one
appliance.
Additional Clearance
approx.
2cm
:
For wall, door and floor
(10cm
: rear
Do not
place
modeling is required.
/2cm:right & left side)
or
store
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
Positioning
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not
?
?
?
?
?
Never try to correct any
washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or
similar materials under the
If it is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliances.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
7
nstallation
I
Electrical connection
1. Do not
2. If the
use an
extension cord
supply cord
is
or
damaged,
double
it must
adapter.
be replaced by the manufacturer or its service agents
person in order to avoid a hazard.
3. Always unplug the machine and turn off the water
4. Connect the machine to
an
supply after
or
similarly qualified
use.
earthed socket in accordance with current
wiring regulations.
5. The
?
?
?
appliance must be positioned so that the plug is easily accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under
pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room
temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
supply pressure must be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
Don't strip or crossthread when connecting Inlet hose to the
Water
valve.
?
Hose connector
?
Rubber seal
?
Hot water
tap
?
Cold
Cold
Hot(option)
water
tap
?
?
8
If the water supply pressure is more than 1000kPa, a
decompression device should be installed.
Two rubber seals are supplied with the water inlet hoses
these are in order to prevent water leaks.
Check water tightness of washing machine connections
by turning the tap completely on.
Periodically check the condition of the hose and replace
the hose if necessary.
Make sure that there is no kink on the hose and that it is
not crushed.
When your washer has two valves,
The Inlet hose which has red connector is for the hot
water tap.
If the washer has two valves, the energy is saved by
using hot valve.
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
water
till
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the Plug.
Disable the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
?
?
The drain hose should not be
than 100
?
?
cm
placed higher
above the floor.
Proper securing of the
the floor from damage
drain hose will protect
due to water leakage.
When the drain hose is too
long,
back into the washer. This will
do not force
cause
abnormal
noise, malfunction, and water leakage.
10
When
installing the drain hose to a sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
I
nstallation
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
in
appliance
a corner
NOTE
of the
Timber
or
on a
solid and level floor surface,
room.
suspended type flooring
excessive vibration
or
load balance
may contribute to
errors.
2. If the floor is uneven,
adjust the adjustable
not insert
of wood etc. under the
(do
preferably
as
required.
feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base
of the washer. All lock nuts must be tightened.
NOTE
pieces
feet
In the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
that the
on a
raised
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
be
clean, dry and level.
flat hard floor.
(Slippery floors)
Position each foot
?
must
on
sections and stick the
Tread Mate is
a
the Tread Mate and level the machine
pieces
on
to
the
(Cut Tread
to suit.
dry tile where machine is
to
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Rubber
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
to at
corners
Insert the rubber cups to reduce vibration.
Rubber cups ( p/no. 4620ER4002B ) can be
least 2 floor beams with
of the
room,
screws.
more
Cup
be purchased from
hardware suppliers.
It
where the floor is
purchasedfrom
mm
can
stable.
the LG spare parts
department.
Important!
Proper placement and levelling of the washer ensures long, regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
?
?
?
?
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
across corners
11
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
12
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
?
If too
max
detergent should be used according to the
instruction of the detergent manufactrurers.
much
can occur
result
is used, too many suds
and this will decrease the washing
?
detergent
heavy load to the
malfunction)
or cause
(Causing a
?
dosage
If there are too many suds,
quantity must be reduced.
Use
the
motor.
detergent
specified Front loader washing powder
only.
?
Main wash
only
?
?PreWash+MainWash
2.
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
(
)
Detergent usage may need to be
adjusted for water temperature, water
MAX
MAX
125 ml
125ml
Tips
?
Full load
according
:
to
manufacturer's
recommendation.
?
Do not exceed the maximum fill line.
Overfilling
can cause
early dispensing
3/4 of the normal amount.
?
Part load
?
Minimum load
:
:
1/2 of full load.
of the fabric softener which could stain
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
Detergent is flushed from the dispenser
at the beginning of the cycle.
days.
Softener will
automatically be added
during the last rinse cycle.
The soap drawer can be partially
opened to add pre dissolved soap
powder during the initial fill.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
on
the clothes
13
unction
F
Recommended
(
)
:
according
courses
to the
WD-12331(6)AD
Fabric
Program
First check if
Proper
Temp.
(Option)
Type
(30°C, 40°C,
60°C-Eco)
30˚C
(Cold, 40˚C)
If the
Program setting
Intensive
:
80
3.0kg
52
2.0kg
50
2.0kg
44
30˚C
4.0kg
30
Select the water temperature to the wash cycles.
Always follow garment manufacture's care label or instructions
laundry
is
laundering.
heavily
with "Intensive"
If the
soiled "Intensive"
option
option
is effective.
for test in accordance
laundry
is
heavily soiled,
or
in
conformity
with
"Pre Wash" Cotton is recommended.
Pre Wash is available in Cotton and
14
(100)
4.0kg
EN60456 and IEC 60456.
Pre Wash
103
Rinse Hold
(30˚C)
soiled.
when
:
(137)
Rinse+
Cold
Quick 30 Coloured fast laundary
Intensive
Dry
(Cold, 40˚C)
"Hand Wash" marked
delicate and wool laundry.
:
Rating
30˚C
laundry easily
damaged.
lightly
Rinse+
Pre Wash
(30˚C,60˚C)
Delicate
Temperature
140
Rinse Hold
40˚C
Wool/Silk Machine washable woolens
with pure new wool only.
Water
Minutes
Rating
60˚C
Synthetic Polyamide, Acrylic,
Polyester.
which is
Load
in
Intensive
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear...)
Hand
Wash
Option
95˚C
Colour fast gaments
Delicate
Maximum
linen towel
(white cotton,
and sheets...)
Time
is
laundry
machine washable.
Cotton
laundry type
Synthetic Program.
ow
H
1. Cotton
to
washer
use
selected upon power
?
?
?
Press the
Press the
2. Manual
automatically
Power(
)
on.
button to start.
Start/Pause(
)
button.
?
?
Initial conditions
-
-
-
Wash
:
main wash
Rinse
:
3 times
Spin
1400 rpm
:
-
-
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
pressing
each button.
selecting the each conditions, please
refer to the page16~page23
For
[WD(M)-14331(6)AD
/ WD-14335AD]
1200 rpm
Selecting
?
Press the
Start/Pause(
) button.
[WD(M)-12331(6)AD]
Water temperature
:
60˚C
Program : Cotton
15
H
(1)
(2)
(3)
(4)
ow
to
use
washer
Dial : Program
Button : Start / Pause
Button
Button
:
:
(5)
(6)
(7)
(8)
Intensive
Rinse Hold
Button
Button
:
Rinse+
:
Pre Wash
Button
Button
:
Dry
:
Child Lock
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Option
?
By pressing the
Option button,
all Option
functions may
be selected.
-
-
Intensive
Rinse Hold
-
Rinse+
?
If the
-PreWash
is
laundry heavily
option is effective.
By selecting
?
?
?
Is selected by pressing the Rinse Hold button
this function leaves clothes in the machine;
suspended in the water after a rinse without
entering
?
into
spin.
To proceed to a Drain or Spin function after a
Rinse hold, select Drain on the program dial or
press the Spin selector button to the desired
speed, then press the Start/Pause button.
16
increased.
laundry
is
heavily soiled,
course
is effective.
Pre Wash is available in Cotton and
5.
?
?
?
are
the rinse
Synthetic.
the Intensive
2. Rinse Hold
If the
"Pre Wash"
soiled "Intensive"
time may be
program selected.
By selecting Rinse+ function,
4. Pre Wash
?
option, the wash
extended, depending on the
For additional rinse which may assist in
removing traces of detergent residue.
time and the rinse water
-Dry
1. Intensive
?
3. Rinse+
?
Dry
When you want to
dry,
select this button.
Available in Cotton and
Please note that the
3.5
kg.
Please
Synthetic.
drying capacity
remove excess
is
clothes
from the
completed wash before
comencing the drying and ensure
cold water tap is left
The
required lamp
that the
on.
will light up for
identification.
H
ow
to
use
washer
Spin
[WD(M)-14331(6)AD/WD-14335AD]
?
By pressing the Spin button, the spin
speed can be chosen and the LED of
is turned
[WD(M)-12331(6)AD]
1. Spin selection
rpm
on.
?
Spin Speed
the program
?
is available
as
according
to
follows.
WD(M)-14331(6)AD
/ WD-14335AD
Cotton, Rinse+Spin, Quick 30
-
NoSpin-400-600800-1000-1200-1400
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Spin only:
Delicate
-
1. Press the Power buton.
2. Set the desired
the
Spin
spin speed by pressing
NoSpin-400-600-800
?
button.
WD(M)-12331(6)AD
Cotton, Rinse+Spin, Quick 30
-
3. Press the Start/Pause button.
NoSpin-400-600-8001000
-
1200
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Delicate
-
NoSpin-400-600-800
2. No spin
?
If
spin is selected,
after draining water.
no
the washer stops
17
H
ow
to
Water
use
washer
Child Lock
Temp.
If you choose to lock
the buttons on the
control
assembly to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
can
be set
by pressing
the
Rinse+ button and Pre Wash button
?
By turning
the
temperature
-
Program Dial,
can
the water
simultaneously. (About
be selected.
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
more
detailed
refer to
the page14.
will
light up
?
information, please
When child lock is set, all buttons
except for power button.
are
locked
To deactivate Child Lock system, press
Rinse+ and Pre Wash buttons
simultaneously again. (About three seconds)
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both Rinse+ and Pre Wash
once
together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
18
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
to
ow
H
use
washer
Dry
The drying capacity for this model
is 3.5 kg. Please remove
approprate excess weight before
commencing the drying cycle.
NOTE
?
?
This
guide
Cycles
to
sensors measures
dry
most
the
temperature of the exhaust to increase
or decrease drying temperatures for
selected
faster reaction time and
For
temperature control.
easily.
most even drying
sure
,
all articles in the
are
similar in
Do not overload
dryer by
too many articles
into drum. Items must be
stuffing
able to tumble
If you open door and
dryer has finished its
freely.
remove
cycle,
load before
remember to
press the Start/Pause button.
By pressing
Use your Automatic
loads.
Electronic
material and thickness.
?
Automatic
automatical process from
washing to drying can be
clothes load
?
?
washer-dryer's
make
?
1.Drying
the DRY button, you
can
?
Recommand Automatic
clothes type.
a) For Synthetics select
b)
c)
d)
tighter
drying
-
Low
course
for
Temp.
If you want to iron clothes-Less.
For Cottons select Normal
-
For washable
select
More
nappies
NOTE: The estimated drying time varies
from the actual drying time with an
-
Automatic. The type of fabric, size of the
load, and the dryness selected, do affect
the
drying
times.
select
Normal
Low
Temp.
More
Time
Less
19
ow
H
to
washer
use
Dry
2.Drying
Fiber
guide
time
-
?
?
press the Dry button, the
can be selected.
By
Drying
drying
time
When
selecting drying only, drying
course will start after spining. (The
spinning time is about 19~22min.)
?
These
drying
times
given
dryer for
are
as a
-
-
temperature and type of fabric and your
own
will be your best
experience
guide.
Woolen Articles
-
dry woolen articles. Pull them
their original shape and dry them flat.
Woven and
-
-
Some
Loopknit
Materials
loopknit materials may
shrinks, by varying amounts, depending on their
quality.
woven
and
Always stretch them
drying.
out
immediately after
Permanent Press and
-
-
to
Do not overload your
Synthetics
dryer
Take out permanent press articles
the dryer stops to reduce wrinkles.
20
as soon as
Night
Gowns
Always check the manufacture's instructions.
Do not
dry any items made from
rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and table cloths
c) bathmats
Fiber
Do not tumble
clothes and
Rubber and Plastics
guide
manual
help you set your
drying. Drying times can vary greatly
depending on dampness, room
to
Leather Materials
Always check the manufacture's instructions.
Baby
last up to 150min.
course can
or
-
or
containing
glass
dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
Do not
H
to
ow
Time
1. Time
washer
use
Program
Delay
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
Load laundry and close the door.
Place the detergent and fabric softener
-
-
?
-
?
How to set "Time
-
-
Delay"
Program dial to select
the program you require.
Press Time Delay button and set
Lamp
will
light
up to indicate selected
the
1. Program
When Start/Pause button is
Press the Start/Pause button.
(":" blinks.)
selected.
If Time
?
button is
Delay
displayed. The
is
"3:00"
pressed,
maximum delayed
time
is 19 hours and the minimum time is
?
to the
pressed,
the Cotton program is automatically
-
?
according
Turn the
desired time.
?
available
program.
Press Power button.
-
are
laundry type.
in the drawer.
?
8 programs
-
By turning the Program dial, the
program is selected in order of
Cotton
Delicate
Quick 30
"
-
-
3 hours.
Rinse+Spin
Each
button advances
Wool/Silk
on
hour.
pressing of the
time delay by one
To cancel the time
delay,
press the
-
-
Drain
-
-
Hand Wash
Synthetic".
For
information regarding laundary type
for each program, please refer to page 14.
Power button.
?
?
Time
'expected time' from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
Delay
According to
-
is
the condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
21
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
cycle.
?
Press the Power button to turn power
and off
To cancel the Time
power button
2. Pause
?
?
?
temporary stop of wash cycle is
needed, press the Start/Pause button.
?
at the end of the wash
pressed,
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
[WD(M)-14331(6)AD / WD-14335AD]
-
Door Lock
Cotton
Program / Main Wash /
Normal Rinse / 1400 rpm / 60˚C
[WD(M)-12331(6)AD]
-
Cotton
Program / Main Wash /
Normal Rinse / 1200 rpm / 60˚C
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
by pressing
the
Start/Pause button to stop the washer.
?
The door
22
can
be
opened
after
a
short
delay.
the
for Cotton program.
And the other initial conditions as
washer is
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
When the Power button is
Initial program
?
the
2. Initial Program
If
or
Delay function,
should be pressed.
on
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed.
"
1. Special function
?
When child lock is selected, the
is displayed.
"
?
display
"
delay is selected, it shows
the remaining time to finish the selected
"
4. Time left
?
When time
?
During washing cycle, the remaining
washing time is displayed.
Recommended program
manufacturer.
(
program.
-
)
:
-
diagnosis display
Cotton 95˚C
:
?
If the machine encounters
operation, the
displayed.
a
fault
during
"
"
"
"
"
"
associated fault will be
-
"
"
"
"
"
:
Water pressure
:
Problem of
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
sensing
overfilling
error
-
water
"
"
"
"
-
-
trouble
"
"
:
Water temperature trouble
:
Over load in motor
:
Over load in motor
"
:
Dry
heater
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.
minutes
:
43(40)
minutes
:
Delicate
around 52 minutes
:
Wool/Silk
:
around 50 minutes
Hand Wash
:
around 44 minutes
-
?
"
Synthetic
20(17)
around 1 hour and 20 minutes
-
"
Cotton 60˚C
around 1 hour and
-
by
WD-12331(6)AD
around 2 hours and
2. Self
washing
Quick 30
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
around
21(18)
minutes
The
washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing
program operates,
the wash time may be extended.
(Max. increasing
time is 45
minutes.)
23
M
aintenance
Before
cleaning the washer interior, unplug the electrical power cord to
avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
error
detergent
-
message will blink
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
filter is clean to
1.
ensure
left in the
smooth
laundry.
running of your
using "Drain" program and
remove tangled threads or foreign objects.
Be careful when draining if the water is hot.
First drain the water
Allow the water to cool down before
emptying
objects
or
the lower
opening
Open
cap( )byusinga
coin. Drain plug ( )
to pull out the hose.
cover
the door in
2.
an
cleaning
water
carrying
out emergency
emergency.
use a
flowing
then open the pump filter to
the drain pump,
Unplug the drain plug ( ),
allowing the water to flow out.
this time
machine.
3. Remove any
At
vessel to prevent
on
to the floor. When
from the pump filter
cleaning,
close the lower
cover
cap.
100
3
1
2
24
3
After
( )
)to the original place.
the pump filter
open to the left.
).
clockwise and insert the drain
plug (
)
(
turn the pump filter
water does not flow any more, turn
(
material
foreign
2
aintenance
M
Dispenser
After
?
?
?
a
while
drawer
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
jet
of
a
deposit
running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
recess
Detergent can also accumulate inside the recess
be cleaned occasionally with an old toothbrush.
?
Once you have finished cleaning,
rinse cycle without laundry.
The
?
washing
replace
If you live in a hard water area, limescale may
seen and thus not easily removed.
?
The
continuously
appliances,
build up in
and if it is not
kept
places where
in check,
the
washing
If you
run a
washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
Although
metal
?
the drawer and
drum
Over time the build up of scale clogs
maintenance or repairs may result.
?
which should
use
it cannot be
expensive
be caused
by
small
drum should be cleaned from time to time.
descaling agents, dyes
or
bleaches, make
sure
they
are
suitable for
washing
machine
use.
Descaler may contain chemicals that may
Remove any spots with
Never
use
a
stainless steel
damage part of your washing
machine.
cleaning agent.
steel wool.
25
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirits, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot water.
Repeat process if necessary.
Remove hard water
NOTE
cleaners labeled
deposits using only
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
26
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
roubleshooting
guide
T
This washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
Fully
is not
hose(s)
are
The filter of the inlet
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
slowly.
or
clogged.
Clean and
straighten
the drain hose.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean the drain filter
27
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
circuit overload, have
a qualified electrician.
a
by
water
replace fuse.
capacity.
or
supply tap.
on.
Washer will not
Check that the door is
spin
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Once started, the door can not be
opened for safety reasons.
Door does not open
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
removing
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
28
a
few towels.
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Solution
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose(s).
clogged.
?
?
?
?
?
Drain hose is kinked
The drain filter
clogged.
is clogged.
or
straighten the drain
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
unbalance
an
hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Clean and
or
2 similar items to
help
load to allow proper
(ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
?
Is the door
or
opend
not completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the
?
Water overfills due to the
faulty water
valve.
power
plug
and call for service.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
?
Water level
sensor
has malfunctioned.
Over load in motor.
Over load in motor.
Check water
supply.
Turn the tap on
If"
is not released,
plug and call service.
"
unplug
power
29
of Warranty
erms
T
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
product
it
means
the
product
is
symbol is attached to
covered by the European
a
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and
3. The correct
human health.
4. For more detailed information about
of your old
disposal
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
Service
?
If the
?
?
?
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
Provide instruction
?
on use
If the fault is caused
?
Noise
?
or
sound,
by pests
product
for
or
change
example,
or
product.
example
water drain
sound, spin
warming beeps.
the installation for
example, levelling
Normal maintenance which recommended
?
the set-up of the
rats or cockroaches etc..
vibration that is considered normal for
Correcting
?
of
by
the
product, adjustment
the owner's manual.
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
Removal of
?
inlet hose
Replace
?
fuses in
or
correct house
Correction of unauthorized
?
Incidental
?
with this
If this
or
correct house
the pump and
plumbing.
repairs.
consequential damage
appliance.
or
product is used for
(Example : Public places
dormitory)
?
wiring
of drain.
to
personal property
caused
by possible
commercial purpose, it is not warranted.
such as public bathroom, lodging house,
training center,
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
30
defects
of
a
Download PDF

advertising