LG | WD-12126RD | LG WD-12124RD Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD-12124(6)RD
WD-14124(6)RD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
Direct Drive
water level and
consumption.
System
The advanced Brushless DC motor rotates the Drum
without belt and
directly
pulley.
Child-Lock
The Child-Lock
pressing
system has been used
any button to
Low noise
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................23
Troubleshooting guide
Terms of
2
.............................................................26
Warranty ...................................................................29
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any other
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum has
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S
pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
cover
cap
plug
Name
:
Front
loading washing
:
220
240V~,50Hz
Size
:
Weight
Wash capacity
Dry capacity
:
Max. Watt
:
600mm(W) 600mm(D) 850mm(H)
71kg
7kg
3.5kg
2150W(Dry) / 2100W(Wash)
Spin speed
:
Power
supply
:
:
No
No
Water
The appearance and
-
:
machine
spin/400/800/1000/1400[WD-14124(6)RD]
spin/400/800/1000/1200[WD-12124(6)RD]
:75
consumption
Permissible water pressure
(10.7
0.3-10kgf/
specifications
/kg)
(30-1000kPa)
may be varied without notice to raise the units
Accessories
Inlet
4
feet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
The
appliance
is fitted with transit bolts to
Removing
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 3 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
along
with the rubber
vibration,
along with the rubber
bungs by slightly twisting the bung. Keep
the 3 bolts and the spanner for future
use.
bungs.
not removed, it may cause
noise and malfunction.
are
3. Take out the 3 bolts
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
cap
2. Unscrew the 3 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Tub
approx.
2cm
Do not
more
appliance.
place
or
store
required.
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol (
)
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
appliance
Washing
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
hose
supply
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
Hot(option)
on
the
When your washer has two valves,
tap
Cold
Cold
Make sure that there is no kink
hose and that it is not crushed.
?
water
tap
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
nstallation
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing
protect
water
of the drain hose will
the floor from
damage
due to
leakage.
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
100cm
min. 60cm
max.
ca.
?
100
Proper securing
cm
min.60cm max.10cm
cm
The drain hose should not be
higher than
?
105
?
max.
100cm
min. 60cm
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
strap
to
leakage.
When the drain hose is too
long,
do not
force back into the washer. This will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven, adjust the
adjustable feet as required. (do not
insert
pieces
Make
sure
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
a
Adjustable
Higher
Adjustable
feet
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
all.
(Please,
move
check both
the
up and down at
of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feets again.
10
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
?
Main wash
Pre Wash
only
+
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
Main Wash
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the cloths
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
F
unction
Recommended
Energy
label data based
Fabric
Program
Cotton
courses
according
on
to the
laundry type
program cotton 60˚C, tested in accordance with EN60456.
Proper
Temp.
(Option)
Type
Color fast garments
Water
Washing
Load
Liter
(Option)
60˚C
(Cold,
(shirts, night dresses,
Main+(Pre)
pajamas...)and lightly soiled 30˚C, 40˚C,
95˚C)
white cotton (underwear...)
Cotton-Eco
Laundry type
is the
same
60˚C
in Cotton.
Hand
Wash
Quick 30
Main
Machine washable woolens
with pure new wool only.
Main
"Hand Wash" marked
delicate and wool laundry.
Laundry type
is the
in Cotton and
Synthetic.
:
If the
laundry
7.0kg
75
30˚C
(Cold, 40˚C)
Cold
(30˚C,40˚C)
same
is
30˚C
(Cold, 40˚C)
heavily soiled,
Minutes
(Auto,
163
Small, big)
(Auto,
Time Add,
5.0kg
68
Small, big)
3.5kg
70
Time Add,
183
(Auto,
laundry easily
30˚C
damaged.(silk, curtains...) (Cold, 40˚C)
Pre Wash
5.0kg
73
40˚C
(Cold,
Main+(Pre)
30˚C,60˚C)
Delicate
Wool
75
Time
in
(Option)
Time Add,
Main+(Pre)
(40˚C)
Synthetic Polyamide, Acrylic,
Polyester.
Delicate
7.0kg
Dry
in
Main
Main
"Pre Wash"
90
Small, big)
3.0kg
60
1.0kg
48
2.0kg
52
1.0kg
48
2.0kg
52
1.0kg
48
5.0kg
48
2.0kg
40
-
61
-
-
61
-
-
60
course
-
-
30
-
is recommended.
Pre Wash is available in
Cotton-Eco, Cotton, Synthetic program.
Water Temperature : Select the water temperature to the wash cycles. Always follow garment
manufacture's
care
label
or
instructions when
laundering.
13
H
ow to use
washer
Pre
Quick-
1400
95
1000
60
800
40
Nor mal
400
30
N
Spin
Press the
) button
?
Press the Start/Pause button.
?
Initial condition
Power(
Add
Big
Small
on.
?
?
old
im
Aut
3. Auto half load.
automatically
selected upon power
Hold
Super
Main
1. Cotton
Rinse
to start.
Auto half load
saves you time and
when
money
washing smaller loads.
The washing machine is fitted with a self
adjusting
water level
system.
-
Wash
:
Main wash
This system enables the machine to use
the amount of water needed to wash
-
Rinse
:
3 times
and rinse the
-
-
-
Spin : 1400 rpm [WD-14124(6)RD]
1200 rpm [WD-12124(6)RD]
Water temperature
?
:
60˚C
Program : Cotton
2. Manual
?
?
Press the
Selecting
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
For selecting the each
conditions, please
refer to the page15~page22
?
Press the Start/Pause button.
14
particular
laundry
load.
in relation to the
ow to use
H
washer
im
D
la
im
a
rLk
D
im
L
ft
12
Rinse
H
im
1
ld
Add
6
8
Au
4
Super
3
4
Big
N
Main
Cld
rmal
Small
(1)
(2)
(3)
(4)
Button
Dial
:
:
Start/Pause
(5)
(6)
(7)
(8)
Program
Button
:
Wash
Child Lock
Button
:
Rinse
Button
:
Spin
Button
:
Time
Button
:
Water
(9) Button : Time Save
(10) Button : Dry
(11) Door Lock
(12) Button : Power
Delay
Temp.
Start/Pause
Program
?
7 programs
are
available
according
laundry type.
-
Cotton-Eco
-
Cotton
-
-
1. Start
-
?
This Start/Pause button is used to start
-
-
wash
cycle
or
pause the wash
cycle.
?
If
temporary stop of wash cycle is needed,
press "Start/Pause" button.
?
When in
?
Synthetic
Qui
k-
3
Quick 30
Lamp will light
up to indicate selected
at the end of the wash
Program
When Start/Pause button is
Cotton/Eco program is
selected.
after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
Hand
ash
Delicate
Wool
Hand Wash
1.
Pause, the power is turned off
automatically
?
to the
ate
program.
2. Pause
?
Deli
-
By turning
the
pressed,
automatically
Program dial,
the program is
selected in order of "Cotton
cycle.
Delicate
Wool
Synthetic
Hand Wash
Quick 30
Cotton-Eco".
Regarding to the laundry type for each program
Please refer to the page13.
2. Course
-
Cotton-Eco
-
-
Cotton
-
-
-
Synthetic
-
Wool
Hand Wash
Quick 30
Delicate
15
ow to use
H
washer
Wash
?
Child lock
By pressing
the Wash
button, the wash type
can
-
be selected.
If you choose to lock the buttons on the
control assembly to prevent tampering, this
Main
-Pre+Main
function may be selected.
1. Child lock
1. Main
?
?
Main
course
normally
2. Pre
?
If the
?
soiled
+
lightly
or
laundry.
be set
by pressing
and
and Rinse button
is
heavily soiled,
"Pre
+
Main"
ime
Left
is effective.
?
Synthetic program.
The
can
holding the Wash
simultaneously.
Pre Wash is available in Cotton-Eco, Cotton
and
Child lock
Main
laundry
course
is available for
required lamp
identification.
will
light up for
?
When child lock is set, all buttons
To deactivate Child lock
are
inoperable.
system, press and
hold the Wash and Rinse button
simultaneously again.
ime
?
To
change to
Left
the desired program, whilst in
child lock mode.
1. Press and hold both Wash and Rinse
button
together
once
again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Change
the desired
program
?
The child lock
is
errors occur.
power is off.
16
can
be set at any time and it
when operational
automatically canceled
Also Child lock works when
H
washer
ow to use
Rinse
Spin
By pressing
?
button,
the Rinse
the Rinse
type
can
be selected.
-
-
-
-
Normal
Super
Normal + Rinse Hold
Super + Rinse Hold
[WD-12124(6)RD]
1. Normal
?
By pressing
can
?
Cotton-Eco / Cotton / Synthetic performs 3
Rinses
?
-
Delicate / Wool / Hand Wash
/Quick 30
performs 2 Rinses
2.
?
Use the
+
1
more
rinse time.
excess
-
400
800
-
800
-
1000
-
1000
-
1200
-
1400
-
Is selected
by pressing
repeatedly
this function leaves clothes in the
the Rinse button
washer; suspended in the
without
?
entering
into
water after a rinse
spin speed
Press the Start/Pause button
or
program.
again
to start
800
-
-
select the No
to the
400
800
1000
400
800
1000
1000
No
Spin
400
Delicate
800
No
Spin
Wool / Hand Wash
400
-
according
follows.
Synthetic
800
1000
No
Spin
Quick 30
[WD-14124(6)RD]
400
400
only,
is available
800
1000
1400
No
Spin
1200
No
Spin
[WD-12124(6)RD]
program.
If you want to drain
as
Cotton-Eco / Cotton
400
Start/Pause button to cancel the Rinse Hold
?
-
spin.
If you want to drain and spin, when Rinse
Hold function is proceed, Press the
function and select
Spin speed
[WD-14124(6)RD]
1400
No Spin
[WD-12124(6)RD]
1200
No Spin
3. Rinse Hold
?
Spin selection
program
dirt
[WD-14124(6)RD]
No Spin
400
?
spin speed
-
-
rinse when additional
Super
rinsing is desired to remove
and detergent soiled loads.
the
be chosen.
[WD-12124(6)RD]
No Spin
1.
Normal
Spin button,
-
Super
?
[WD-14124(6)RD]
the
Spin
800
1000
program.
The
required lamp
identification.
will light up for
17
ow to use
H
2. No
?
Spin
Time
If "No
after
It is
washer
Spin" is selected,
draining water.
possible
the washer
to remove this
rinse when "No
Spin"
spin
is selected
stops
on
the
on
the
Wool, Delicate and Hand Wash program.
The
required lamp
identification.
will
ime
1. Time
light up for
Delay
Delay
ime
Delay
Delay
Preparing washing before starting
"Time
Delay"
-
-
-
Turn
on
the water
tap.
Load
laundry and close the door.
Place the detergent and fabric softener
in
the drawer.
?
How to set "Time
-
-
-
Delay"
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set the
Press
desired time.
-
Press the Start/Pause button.
("Time Delay" blinks.)
?
If Time
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
?
?
Each
pressing of the
delay by one hour.
To cancel the time
Power(
?
Time
?
)
press the
is
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
to the
selected
According to
the condition
temperature, the
washing time
18
delay,
button.
Delay
present
or
button advances time
delayed
may vary.
of water supply and
time and the actual
H
ow to use
Water
?
washer
Time Save
Temp.
By pressing
the
Temp.
ime Save
button, the water
temperature can be
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
1. Time Save
?
This
of
1. Water
?
-
-
-
Water
temperature
below
according
-
can
Cotton
60˚C
95˚C
To
option
be selected
be used to reduce the time
this
use
once
press the Time Save
before the wash program is
option
started.
as
to the program.
can
wash program.
button
?
Cotton-Eco
60˚C
40˚C
This
option
is not available with Quick 30
program.
Cold
30˚C
40˚C
Synthetic
40˚C
-
?
Temperature
a
60˚C
Cold
30˚C
Delicate & Wool & Quick 30
30˚C
40˚C
Cold
Hand Wash
Cold
30˚C
The
40˚C
required temperature lamp
identification.
For the
more
will
light up for
detailed information, please
refer
to the page13.
19
ow to use
H
washer
2.
Dry
This
?
washer-dryer's
automatical process from
washing to drying can be
selected
For most
?
make
even
sure
drying,
all articles in
are
After the end of
too
remove
load before
remember to
cycle,
dry,
"
"
is
displayed.
the "Start/Pause" button the
ended after about 4 hours.
Time Guide
can
?
?
the
By pressing
-
Dry button,
the
drying
time
be selected.
These
times
Time Add
:
are
given
10min is added
by pressing dry
button.
Auto
?
Big(150min)
?
Small
20
as a
From 10min to 90min selectable
?
(120min)
:
(60min)
:
Cotton
Towel
:
time.
Do not overload your
Synthetics
dryer.
Take out permanent press articles as
as the dryer stops to reduce wrinkles.
or
soon
Leather Materials
check the manufacture's
instructions.
Always
Baby Clothes an Night Gowns
Always check the manufacture's
-
instructions.
guide to
help you set your dryer for manual drying.
Drying times can vary greatly depending on
dampness, room temperature and type of
fabric and your own experience will be your
best guide.
drying
tangled
drying
the
Do not tumble
Permanent Press and
-
-
(Manual operation)
?
a
-
Cooling Cycle.
Drying
lengthen
to their
Fibre
1.
this will
-
program can be ended. If you not press
the "Start/Pause" button, the program is
"
as
dry woolen articles. Pull them
original shape, they ary them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may
shrink, by varying amounts, depending on
their quality.
Always stretch them out immediately after
drying.
-
dryer by stuffing
If you open door and
dryer has finished its
"
Items should not be loaded in
condition,
Woolen Articles
Do not overload
By pressing
dryer can handle a load of up to 4kg
dry weight of articles.
When loading, shake out each handful of
clothes so that they can tumble freely.
thickness.
press the Start/Pause button.
?
Drying guide
Your
similar in material and
many articles into drum. Items must be
able to tumble freely.
?
?
easily.
the clothes load
?
?
3.5kg
3.5kg
Cotton
2kg
Rubber and Plastics
dry any items made from or
containing rubber or plastics, such as:
a) aprons, bibs, chair covers
b) curtains and tablecloths
Fiberglass
Do not dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
-
-
Do not
H
3.
?
?
ow to use
When
drying cycle is completed,
[COOL DOWN] is displayed on the
display.
The COOL DOWN is
a
setting
drying cycle
Multi
is
1. Power
When you are not remove a load of
clothes from the dryer as soon as it
stops, wrinkles
?
Power
Completion of Drying
automatically when
complete.
?
washer
can
?
form.
?
The COOL DOWN
operating periodically
tumbles, rearranges and fluffs the load
to
avoid wrinkles without heat for up to 4
hours.
?
The
message will continue to display
until the clothes are removed or the
Start/Pause button is
Press the
Power(
on
and off.
power
pressed.
?
Door Lock
button to turn
To cancel the Time Delay function, the
Power( ) button should be pressed.
2. Initial
?
)
Program
When the Power(
) button is pressed,
the washer is ready for Cotton program.
And the other initial conditions as
follows.
So, if you
want to advance into the
washing cycle without changing the
program, just press Start/Pause button
and then the washer will proceed.
Initial program
[WD-14124(6)RD]
?
It shows whether the door
or
?
can
be open
?
not.
When the
be open.
lamp
is on, the door
can
not
Cotton Program / Main wash /
Normal Rinse / 1400 rpm / 60˚C
[WD-12124(6)RD]
?
Cotton Program / Main wash /
Normal Rinse / 1200 rpm / 60˚C
21
H
washer
ow to use
3.
Display
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When Child lock is selected, the
is displayed.
"
"
?
After the end of
?
When time
dry,
"
"
is
4. Time left
?
displayed.
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
delay is selected, it shows
the remaining times to finish the selected
-
program.
-
-
2. Self
diagnose display
-
?
If the washer encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
a
during
-
the associated fault will be
-
:
Water pressure
:
Problem of
:
Door is not closed
:
fault
sensing
overfilling
-
error
Over load in motor
:
Water inlet trouble
?
"
"
"
"
Synthetic
around 1 hour and 30 minutes
:
Delicate : around 1 hour and 1 minute
Wool : around 1 hour and 1 minute
Hand Wash : around 1 hour
Quick 30
:
around 30 minutes
trouble
The
washing time may vary by the
laundry, water pressure, water
temperature and other washing conditions.
If
an
unbalanced load is detected
or
if the
Drainage
:
Unbalanced load
removing program operates, the
wash time may be extended.
:
Water temperature trouble
(Max. increasing
:
Dry
heater
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page28 and
follow the guide.
22
Cotton : around 2 hours and 43 minutes
:
"
"
Cotton-Eco : around 3 hours and 3 minutes
amount of
?
"
"
manufacturer.
water
Over load in motor
:
by
suds
time is
45minutes.)
aintenance
M
Before
cleaning
the washer interior,
unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
1.
Open the lower cover
cap( )byusinga
2.
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
Be careful when
objects
ensure
objects.
or
draining
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
foreign
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. When
( )
open to the left.
cleaning,
material
( ).
After
turn the pump filter
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
23
)
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
a
deposit
?
It should be cleaned from time to time with
a
?
If necessary it
from the machine
can
be removed
completely
water.
by pressing
the catch
downward and
?
by pulling it out.
cleaning, the upper part
jet of running
in the drawer.
To facilitate
of the fabric softener
compartment
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
cycle
The
without
washing
If you live in
seen
with
occasionally
Once you have finished
rinse
?
recess
a
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places where
it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
?
Although the washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
?
The
?
If you
washing
use
be caused
descaling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any
24
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
spots with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
opening, flexible gasket and
Run washer through a complete cycle using hot water.
Repeat process if necessary.
Dry
around the washer door
NOTE
Remove hard water
door
glass.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
temperatures,
an area
1. Turn off water
Plug
4. Add
freezing
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
where
follow these instructions to
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
a
an
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer,
8. Store washer in
for 1minute to drain out all water.
drain and
dry excessive
water from the
compartments.
upright position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
25
T
roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function at all, check the
following points before you contact your service provider.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer and
check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
Vibrating
sound
noise
?
?
a
Heavy wash loads may produce
thumping sound. This is usually
probably
normal.
redistribute wash load.
Have all the transit bolts and
packing
?
If not removed
been removed?
Are all the feet
the
If sound continues, washer is
out of balance. Stop and
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent
detergent may
foaming which
or
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
supply tap
completely open.
is not
?
Water inlet
?
The filter of the inlet
hose(s)
are
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
drains
26
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
fits
plug
sure
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
removing program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
a
few towels.
27
T
roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
kinked.
hose(s)
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
unbalance
detection and correction
system. If
individual
are
heavy
articles
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
help
load to allow proper
loaded
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
(ex.
?
appliance
or clogged.
clogged.
bath mat, both robe,
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
and call for
service.
?
Water overfills due to the
faulty water
valve.
Close the water
Unplug the
?
Water level
?
Over load in motor.
?
Over load in motor.
?
Check water
sensor
plug.
has malfunctioned.
supply.
Turn the water
If"
power
28
tap.
power
Call for service.
tapon.
"is not released,
plug
unplug
and call for service.
T
erms
of
Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to use the
If the
product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
change
or
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
?
Replace
fuses in
or
correct house
Correction of unauthorized
Incidental
wiring
or
correct house
repairs.
consequential damage to personal property
possible defects with this appliance.
If this
or
product
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
29
a
M
30
emo
P/No.: 3828ER3012X
Download PDF

advertising