LG | WD-1042FH | LG WD-1042FH Owner’s Manual

WD-1042FH
WD-1022FH
Product Features
Protection
against
wrinkles
With the alternate rotation of the drum,
the laundry is minimized.
wrinkling
in
Preferred temperature selection
There
are
4
temperature selections between cold and 95°C
Low noise speed control system
By sensing the load and balance, it evenly distributes the load to
minimize the
(Water Temp)
spinning
noise level.
e
Child-Lock
(Eco)
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
BS
Details
Plug Safety
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
the terminals in your
plug, proceed
as
apparatus may
not
correspond
with the coloured
The wire which is coloured Green and Yellow must be connected to the terminal in the
E
or
by
the earth
symbol (
)
or
markings identifying
follows:
coloured Green
or
plug
which is marked with the letter
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
2
a
13 amp
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
You must read the whole of this instruction
objects
book before you use the appliance.
Follow the advice carefully.
Do not wash
Keep the book for future reference. If you sell
give away the appliance, make sure that the
book is passed to the new owner.
The following warnings are provided in the
interests of overall safety.
You must read them before the appliance is
installed
or
or
used.
This
appliance is designed to be used by adults.
Children should not be allowed to touch the controls
play
It is
with the
product.
this
dangerous to modify the specifications
appliance in any way.
appliance is heavy. Care
when moving it.
This
of
should be taken
All
packaging and transit bolts must be removed
before the appliance is used.
Serious damage may occur if this is not done.
Any plumbing work required to install
this appliance should be carried out by
plumber or a competent person.
Any
electrical work
a
qualified
required to install this appliance
by a qualified electrician or
should be carried out
a
competent person.
Make
sure
that the
its electrical
appliance
supply
If the machine is situated
please adjust the
freely.
does not stand
on
cable.
feet to
on a
that air
the
the water tap after
appliance
can
This
Only wash
to be
Do not operate
with
etc. or inflammable gas
as
near places
gasoline, benzene,
the
laundry.
Leave the
electric shock.
Use the exclusive AC 220V-240V outlet with
terminal. Do not
use an
extension cord
or
ground
double
sure
that all
pockets
are
slightly ajar
between
Before you open the door of the machine check
that the water has drained. Do not open the door
if you
can
still
see
water.
Pets and children may climb into the washing
machines. Check your appliance each time
before use.
use.
unqualified persons may
cause
injury
and/or
serious faults to the machine.
product should be serviced by an authorized
Service Centre only, and only genuine spare parts
should be used.
disposing of your old washing machine, the
electric cable must be cut off and the door catch
dangerous
The base
inoperative
opening
empty. Hard, sharp
carpeting
a carpeted
to avoid it
becoming
to a child.
must not be obstructed
when the
adapter.
Make
door
porthole
washes to preserve the door seal.
must be made
or
material
Use only the recommended quantities of fabric
softener. An excessive amount could damage
Don t
fire
ignitable
leak. Due to volatile nature of these material,
It can cause fire or explosions.
When
cause a
saturated
such
Avoid electric heaters, candles, etc. near the
machine. It may ignite or deform the machine.
It may
are
If volatile
This
machine washed. If in doubt, follow the instructions
you find on the label of the item itself.
sprinkle water.
use.
cleaning fluids
have been used, make sure that they are thoroughly
removed from the fabric before it is placed in the
appliance.
petroleum products.
more
designed
for domestic
designed
Do not machine wash fabrics which
or
are
is
You should not attempt to repair the machine
yourself Repairs carried out by inexperienced
and turn off
appliance.
fabrics which
appliance
It must not be used for purposes other than those
for which it was designed.
while it is in
use.
Do not overload the
stained with edible oil,
glass door becomes very hot during washing.
Keep children away from the appliance
circulate
Always unplug
laundry
screws
damage.
The
carpeted floor,
ensure
coins, safety pins, nails,
as
machine oil, dry-cleaning oil, gasoline, etc.
It may cause fire or explosions.
with
or
such
stones can cause extensive
or
washing
by
machine is installed
on
floor.
3
Specification
Power
?
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or
its service
Drawer
agents
(For detergent and
fabric softener)
person in order to avoid
hazard.
or
Control
similarly qualified
a
panel
Drain hose
Door
Lower
cover
Drum
Levelling legs
Drain pump filter
Lower
Drain
Emergency
Name
Power
Size
plug
supply
Weight
Wash capacity
Heating
Spin speed
Water consumption
cover
:
Front
:
220-240V~,50Hz
:
600mm(W)
67kg
7.0kg
:
:
cap
door release
loading washing
machine
600mm(D)
:
2200W
:
600/800/1000rpm
67
(9.6 /kg)
0.3-10kgf/ (30-1000kPa)
:
850mm(H)
:
Permissible water pressure
Permissible cold water temperature : 4-25
: Inlet hose (2EA), Spanner (1EA)
Accessories
The hot water should ideally be 60
and must NOT be above 70
Hot inlet valve operates only when water temperature is selected at 60
The appearance and
specifications
or
may be varied without notice to raise the units
95
quality.
Contents
4
Installation
5
Preparing your laundry
7
Adding detergent
7
Control
panel
8
How to
use
your
washing
machine
9
Maintaining
11
Trouble-shooting guide
13
Installation
How to disassemble the transit bolts.
To protect the washer during transportation, the special
4 bolts are locked. Before operating the washer, remove
the bolts
(
If
along
with the rubber
removed, it may
not
they
malfunction)
are
bungs.
heavy vibration,
cause
noise and
1. Locate the 4 bolts that secures the back cover.
2. Unscrew the 4 bolts with
Keep the
use
transit bolts and spanner for future
in case the machine is to be transported
3. Take out the 4 bolts
again.
slightly twisting
Level
1. Select a
place
for installation
on a
Place it
more
firm and
Place it
3.Level
Lower
Higher
by
adjustment
floor
even
than 2cm away from the wall
2.Check the gap
Ensure all feet are
Levelling leg
the
spanner provided.
with the rubber bungs
a
along
bung.
firmly
on
or
other furniture
the floor.
adjustment
After
adjusting the level, check the machine for stability
re-adjust the level if necessary.
Levelling should be done within 1.5 degree angle.
and
Levelling leg
If the washer is not levelled, it may
cause
noise
or
vibration.
Electrical connection
Do not
If the
extension cord
use an
cord is
supply
qualified person in
Always unplug the
damaged,
order to avoid
If the
double
adapter.
replaced by
it must be
a
an
appliance
extension set
is
or
the manufacturer
or
its service agents
or
similarly
hazard.
machine and turn off the water
Connect the machine to
Caution
or
supply
after
use.
earthed socket in accordance with current
supplied
electrical
from
a
cord extension set
portable
or
wiring regulations.
electrical
outlet device should be
portable outlet device, the cord
positioned so it is not subject to
splashing or ingress of moisture.
If a stationary appliance is provided with a supply cord and a plug,
the appliance must be positioned so that the plug is accessible.
the instructions shall state that
5
Water drain
Hook
over
plastic
the
hose
edge of a sink or waste water disposal pipe using
hanger supplied with the machine.
Make sure there
Secure the hose
are no
so
the
kinks in the hose and that it is not crushed.
that it
not be
can
dislodged
while the
appliance
is
running.
The drain hose should not be
Connecting
?
To
prevent leaks
placed higher
than 85cm above the floor.
the inlet hose
two rubber seals
are
supplied
with the water inlet
hose inside the valve connector.
?
If there is
?
Make
only
sure
tap.(IE
:
one
tap,
connect the hose to the cold water inlet.
the correct water valve is connected to the
Hot inlet valve to hot water
?
The connections
are
?
When
cold water,
using only
tightly
corresponding
tap.)
fixed.
only
Connector
cold inlet hose
can
Rubber seal
Hot water
be used.
tap
Cold
1. Fix the red Marked inlet hose at the hot water
tap and
Cold
Hot
at the inlet valve with the red filter on the rear side of
the machine.
2. Fix the other inlet hose at the cold water
inlet with the white filter
The water
6
on
the
rear
tap and
at the
side of the machine.
supply pressure
must be between 30 kPa and 1000 kPa
water
tap
Preparing your laundry
Check
pocket for any articles (coin, safety pin, paper clips, etc.)
zips and fasten button or hooks : loose belt or ribbons should be tied together.
Never wash whites and coloureds together.
Follow the wash code symbols on each garment label and manufacturer's washing instructions.
Close
Soiled condition
Heavily
Washing
soiled
-
-
Normally Soiled
-
Temperature
Pre wash
Main wash
Main wash
cold
95 C
Heavily soiled cottons
Normally soiled cottons
:
Colored cottons
:cold-60C
Synthetics
:cold-60C
Delicate fabrics
:cold-40C
Woollens
:cold-40C
:
-
cold
-
95 C
Adding detergent
Where to
the
place
detergent
detergent drawer.
Put the detergent and fabric softener
in the detergent drawer before washing.
Close the detergent drawer completely.
The drawer for fabric softener
Pull out the
Do not leave the fabric softener in the
?
than 2
MAX
?
detergent drawer for
harden)
the drawer during water fill cycle.
automatically add during last rinsing cycle.
days. (Fabric
Do not open
Softener will
?
Do not fill past MAX indicator.
Do not use solvents (benzine,
?
?
more
softener could
etc.)
Softener level
for
main wash
Detergent
()
Fabric
softener
()
for
pre wash
Detergent
?
()
?
Programs
with PRE-WASH
MAIN-WASH
only
The
detergent should be used according to the instruction of the detergent manufacturer.
detergent is used over the recommended amount too many bubbles will be generated
inferior washing result. Which will cause malfunction.
Use detergent only for drum washing machine.
If the
Detergent dosages
Do not exceed manufacturer's recommended
dosages
as
shown
The amounts
degree
and
the
on
depend
detergent package.
on
-
-
full load
:
type of soiling
the
type of fabric (cotton, synthetic, delicate items,
colour
to manufacturer's instructions
part load : 3/4 of the normal
minimum load
(about 1kg)
:
amount
temperature
degree
and
type of soiling
1/2 the amount used for
full load
Water hardness in your
an
Choosing the right detergent
The type of detergent depends on
wash
according
causing
wool)
amount of wash
-
thus
NOTE
: use
appropriate detergent only
for wool
area.
7
Control
panel
Rinse hold
?
?
Eco button
If you desire to leave you
fabrics in the machine
without spinning after
rinse to prevent them
?
getting wrinkled, you may
select rinse hold by
pressing the
(Rinse) button.
To drain and spin, press
the
(Rinse) button or
(Start/Pause) button to
If you push the
Eco button in
while Whites
program, Eco
function is
selected. Eco
function gives
you almost the
same
6 programs can be
selected depending
on
the
?
type of
?
laundry.
?
If the power button
pressed, Coloreds
is
program is
washing
?
effect as that in
95˚C with less
energy
consumption.
turn off the rinse hold
Power button
Wash program selector
?
automatically set.
By pressing the
(Programme)
button, [Coloreds
Whites Rapid
Delicate
lamp.
Synthetic]
Press the button to
turn power on and
off.
Press the button to
cancel the delay
finish.
Start/Pause button
P
Use the button to
?
start or pause
wash cycle.
The power turns
off automatically
4 minutes after the
pause button is
?
Wool
can
be
selected.
pressed.
(Power)
(Start/Pause)
e
(Wash)
(Rinse)
(Spin)
For manual wash, rinse
and spin speed
?
Use these buttons to
wash/rinse/spin.
When lamp is off
no
change
selection
has been made.
?
Prewash is available for
Coloreds, Whites, Synthetic.
(Eco)
?
?
?
?
temperature.
60
temperature [40
Cold] can
be selected in Coloreds, Synthetic
95
Door open
button
lamp
?
is selected for Whites
only.
By pressing
during operating the
washer, the present temperature is displayed.
It shows
?
button to
door
open the
door.
can
be
or
not.
?
Press the
whether the
opened
the button
Once Child-Lock is set, all buttons are inoperable during operation.
The Child-Lock system can be set at any time even including
during Power-Off, on Pause and operation. It is automatically
cancelled when an operational error occurs and when the cycle
ends.
8
Door Lock
Press the button to select water
The water
Child-Lock
?
(Door Open)
(Programme)
Water temperature selector
?
?
(Water Temp)
?
Only
When the
operates
lamp
is on,
the door
when the
can't be
power plug is
connected to
opened.
220-240V~
outlet.
How to
The whole
(If
no
use
your
machine
washing
process is carried out automatically with
commence.)
washing
just
one
touch.
program is selected, Coloreds program will
the
Prepare
Make
Turn
sure
washing
that the machine is
plugged
in the electric
supply.
the cold water tap.
Press the
(Door Open) button.
on
Load the
Put the
In
case
laundry and close the door.
detergent and fabric softener into
of automatic
1. Press the
washing
(Power) button.
(Start/Pause) button
2. Press the
to start the
washing
automatically.
The coloreds program is carried out
optimum wash program is selected
3.The
To
change
the
drawer.
washing
once
machine.
the load is detected.
program
1. Press the
2.
(Power) button.
Whites
[ Coloreds
Rapid Delicate Wool
Synthetic] will appear in order by pressing
the
(Programme) button.
Make adjustment to water temperature, rinse or spin cycles to suit your wash needs by pressing these buttons.
The time required can be slightly changed according to the laundry amount, water supply and water temperature.
P
Select the function to change rinse,
( ) indicates manual operations.
(Programme)
(Wash)
P
Coloreds
Whites
(Pre
Bed and table linen, towels,
underwear white or colour-fast
+
+
800
Main)
(600, 1000)
NORMAL
(SUPER)
Main wash
(NORMAL+RINSE HOLD)
(SUPER+RINSE HOLD)
used towels.
Delicate curtains, dresses,
shirts etc.
skirts,
(Below 2.5kg)
Delicate
Laundry easily shaped or
damaged.
(Below 2.0kg) Only machine washable woolens
(Water Temp.)
(600, 1000)
Main)
Main wash
(Pre
(Spin)
800
Main wash
Colored blouses, aprons,
shirts, bed linen
For quick washing of less
dirty laundry or frequently
Rapid
(Rinse)
spin and water temperature.
Synthetic
new
about
2 hours &
23 minutes
about
(800, 1000)
43 minutes
about
hour &
9 minutes
Main wash
600
one
Main wash
600
45 minutes
about
Main wash
(Pre
(Start/Pause)
Completion
If the
about
hour &
46 minutes
one
wool label.
Polyamide, Acrylic,
Polyester
3. Press the
time
600
Wool
with pure
Washing
washing
Press the
Switch off the
of
is
+
800
Main)
button to start the
(600,1000)
about
hour &
46 minutes
one
cycle.
washing
completed, power turns off automatically after
(Door Open) button and take out the laundry.
appliance and turn off the tap.
the alarm sound.
9
More convenient manual
It is
convenient to operate
program is firstly set with power
In
more
operations
of Coloreds program
in Coloreds program than in others because Coloreds
manually
on.
Coloreds,
When you want wash only, press the
When you want rinse only,
(Wash)
button to select the
press the
(Rinse) button to select the
When you want spin only,
rinsing
method.
press the
(Spin) button to select the
When you want wash and rinse only,
Spin speed.
press the
(Wash) button and
When you want rinse and spin only,
(Rinse)
press the
(Spin)
(Rinse)
The Child-Lock
button and
method.
washing
button to select each method.
button to select each method.
system
The Child-Lock system can be programed and cancelled
(Eco) buttons simultaneously.
by pressing
both the
(Water Temp.)
and
e
Child-Lock
(If you want to lock all the buttons to prevent all the setting
this option.)
If you want to change the program when the Child-Lock system is on,
1. Press both
(Water Temp.) and
(Eco) buttons.
2. Press the
(Start/Pause ) button.
3. Change the desired program and press the
(Start/Pause ) button.
you
from
a
child
or
infirm persons,
can use
e
(Start / Pause)
(Water Temp)
(Start / Pause)
(Eco)
Change
the desired
e
program
If you want to deactivate Child -Lock
during
wash
cycle, press
both
(Water Temp.)
and
e
(Eco)
simultaneously.
If the
lamp is off, this indicates that the door can be opened into
pushing the pause button. (As the water level is still low enough
In
case
of
adding laundry (when
(Start / Pause)
is
the
washing cycle,
this)
after first
to allow
off)
(Door open)
(Start / Pause)
Close the door after
Adding the laundry.
If the
then
10
lamp is on, select spin cycle to drain water
(Door Open) button to open the door.
and press the
(Start/Pause)button
and
Maintaining
Unplug the power plug prior to maintaining
Clean the filter periodically every 3 months.
Clean the filter in the inlet valve
When
no
displayed
water flows
of the
through detergent drawer,
control panel.
1 Turn off the water tap.
Pull out the filter with
4
clean it
using
a
2
a
tool
or
by
Unplug
filter is
or
the power
plug
with
from
hand and
5
foreign
3
the outlet.
toothbrush.
Insert the filter in it's
clogged
material
"
Pre
Main
"is
Disconnect the inlet hose
Connect the inlet hose and check water
leakage.
original place.
Clean the drain pump filter
Don't drain with hot water in the machine.
CAUTION
1 Open the lower cover cap
(
) by using
Turn the drain
pull
coin.
plug (
out the hose.
)
to
2
Unplug the drain plug (
),
allowing the water to flow out.
At this time
prevent
use a
water
3
vessel to
flowing
on
After
cleaning, turn the pump
filter (
) clockwise and
insert the drain plug (
)to
the original place. close the
to
the floor. If the water does
not flow any more, turn the
pump filter
left.
(
) open
Take out any foreign material
from the pump filter (
).
lower
to the
cover
cap.
100
3
1
3
2
2
11
Maintaining
To prevent
being
frozen in winter
Turn off the water tap and remove the inlet hose.
12
Drain water in the machine
drain
plug (
using
).
1
Maintenance of the drawer
1
Pull out the drawer
slightly upware.
2 Wash it clearly.
Insert it in its
3 place.
MAX
MAX
12
original
Check the
Request
following
before
for service in the
Symptom
asking
case
for service if the
of failure
or
damage
Check
message is displayed
except the followings.
error
Solution
points
?
Pre
?
Main
during washing, rinsing, spinning.
Is the water pressure low
filter clogged ?
or
the
Disconnect the inlet hose and
clean the filter.
Refer
(no inlet)
?
Is there
foreign
matter in the
?
drain filter ?
Clean and
foreign
remove
material from drain filter.
1000
Refer
800
600
?
Is the drain hose bent
or
higher
?
Put the drain hose
evenly.
than 85cm above the floor ?
?
Is the hose
clogged
?
?
Place the drain hose under
85cm from the floor.
Refer
(no drain)
?
?
Rinse Hold
Is the
laundry
tilted to
one
side
?
in the drum?
Super
Normal
Spread
the
laundry evenly.
by pressing
the [Start / Pause ] button. If it
happens after rinsing or spinning,
Release imbalance
call for service.
?
?
Is the washer leveled?
(Imbalance)
Install it
on a
firm and
even
floor.
Refer
?
?
Is the door
opened?
Close the door.
If it is not released,
call for service.
?
Unplug the power
call for service
plug
and
13
Check
Symptom
Coloreds
Whites
Rapid
It is
displayed
Solution
points
if the water overfills due to the
faulty
water valve.
?
?
?
Call for service
?
Turn it
?
Plug it to power supply.
Use exclusive 220-240V~
Synthetic
Wool
It is
displayed
if the water level
sensor
Close the water tap.
Unplug the power plug.
malfunctions.
Delicate
?
Did you press the
button?
?
Is the power
Is the power
?
[
Power
]
plug unplugged?
supply correct?
?
on.
outlet with
?
?
Is the short-circuit breaker
Turn it
ground
terminal.
on.
turned off?
?
?
Did you use more detergent
than recommended?
?
Did you use low suds detergent
for the front loading washing
?
machine?
?
?
Did you remove the transit bolts
and rubber bungs?
Remove it.
?
install it
even
Is the washer level?
?
Is the drain pump
foreign matters ?
clogged
Is the washer loaded with
excessive clothes?
14
Use detergents for front
loading washing machines
only.
?
?
?
Use the recommended
amount.
on
the firm and
floor and level it.
Remove
foreign
matter from
the drain filter.
with
?
Remove the excessive
loads.
P/No.:3828ER3004G
Download PDF