LG | WD-12336AD | LG WD-12336AD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3040P
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-14331(6)AD
WD(M)-12331(6)AD
WD-14335AD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
More economical
by Intelligent
Wash
System
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy
and water consumption.
Intelligent
Wash
Child-Lock
The child-lock
button to
system is
change the
Low noise
to be used for
program
preventing
during operation.
children from
pressing
any
control
speed
system
of load and balance, it evenly distributes load
By sensing the amount
the spinning noise level.
to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
case
of power failure.
System
The advanced Brushless DC motor rotates the drum
directly without
belt and
pulley.
C
ontents
Warnings....................................................................................3
Installation..................................................................................4
Specifications.............................................................................5
Installation..................................................................................6
Care before
washing................................................................12
Adding detergent
.....................................................................13
Function ...................................................................................14
How to
use
washer ..................................................................15
Maintenance ............................................................................24
Troubleshooting guide
Terms of
2
Warranty
.............................................................27
...................................................................30
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
exposed
or
store the washer where it will
?
to the weather.
?
Do not
tamper with controls.
?
Do not
repair
or
replace
any
part of the
attempt any servicing unless specifically
instructions
or
?
?
?
?
lint, paper, rags, chemicals,
etc.
Do not leave the washer door open.
An open door could entice children to
process
retardant of fabrics.
.
?
on
moving.
completely stopped.
can
or
To minimize the
reduce the flame
this
care
or
try to
?
possibility
appliance from
of electric
shock,
the power supply
disconnect the washer at the household
distribution
on,
hang
spotted
or
Do not slam the washer door closed
or
crawl inside the washer.
laundry
in, washed in, soaked in,
explosive substances
(such as wax, oil, paint, gasoline, degreasers,
dry-cleaning solvents, kerosene, etc.) which
may ignite or explode.
To avoid such a result, carefully follow the
unplug
Never reach into washer while it is
The
articles that have been
force the door open when locked. This could
result in damage to the washer.
?
supervision is necessary if this
appliances is used by or near children or
infirm persons. Do not allow them to play
with, or inside this or any other appliance
Keep washer away from fire.
Wait until the drum has
?
?
Close
or
dry
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
the door
?
using
garment manufacturer's wash and
published user-repair
instructions that you understand and have the
skills to carry out.
as
or
with combustible
recommended in the user-maintenance
?
to persons when
Do not wash
cleaned
washer
or
injury
washer, follow basic precautions, including the following:
Do not install
be
or
panel by removing the
fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
dryer is intend only for drying textile material
in water.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
?
?
If you don't have the proper
WARNING :
Improper
shock. Check with
outlet, consult
connection of the
an
electrician.
equipment-grounding
conductor
can
result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
a
-
3
nstallation
I
To minimize the risk of fire in
?
a
tumble
dryer,
the
following
Items that have been
hazard and should
Oil-affected items
sources
Such
as
spotted or soaked with vegetable
not be placed in a tumble dryer.
can
in
a
or
should be observed:
cooking
oil constitute
a
fire
ignite spontaneously, especially when exposed to heat
tumble dryer. The items become warm, causing an oxidation
reaction in the oil. Oxidation creates heat. If the heat cannot escape, the items can
become hot enought to catch fire. Piling, stacking or storing oil-affected items can
prevent heat from escaping and
so
create
a
fire hazard.
If it is unavoidable that fabrics that contain
vegetable or cooking oil or have been
contaminated by hair care products be placed in a tumble dryer they should first be
washed in hot water with extra detergent-this will reduce, but not eliminate, the
hazard. Washed in hot water with extra detergent-this will reduce, but not
eliminate, the hazard. The 'cool down' cycle of tumble dryers should be used to
reduce the temperature of the items. They should not be removed from the tumble
dryer or piled or stacked while hot.
?
Items that have been
previously cleaned in, washed in, soaked in or spotted with
petro/gasoline, dry-cleaning solvents or other flammable or explosive substances
should not be placed in a tumble dryer.
Highly flammable substances commonly used in domestic environments include
acetone, denatured alcohol, petrol/gasoline, kerosene, spot removers (some
brands), turpentine, waxes and was removers.
?
Items
foam) or similarly testured
rubber. like materials should not be dried in a tumble dryer on a heat setting.
Foam rubber materials can, when heated, produce fire by spontaneous combustion.
?
Fabric softeners
products should not be used in a tumble dryer to eliminate
the effects of static electricity unless this practice is specifically recommended by the
manufacturer of the fabric softener or product.
?
Undergarments
dryer.
containing
foam rubber
or
(also
known
as
latex
similar
that contain metal reinforcements should not be
Damage to the tumble dryer can result if metal reinforcements come
drying. When available a drying rack could be used for such items.
?
Plastic articles such
be
?
placed
in
a
as
tumble
shower caps
or
babies
waterproof napkin
loose
covers
a
tumble
during
should not
dryer.
Rubber-backed articles, clothes fitted with foam rubber pads,
rubber-coated tennis shoes should not be placed in a tumble
4
in
placed
pillows, galoshes
dryer.
and
S
pecifications
Name
:
Front
:
220-240
Size
:
600mm(W)
Weight
:61kg
Power
Wash
supply
capacity/Max.
Dry capacity/Max.
Water
Watt
Watt
:
7
:
3.5
V~,50 Hz
x
550mm(D)
x
850mm(H)
kg (1350W)
(22
Permissible water pressure
:
0.3-10
Spin speed
:
No
The appearance and
machine
kg (2100W)
:154
consumption
loading washing
kgf/
/kg)
(30-1000 kPa)
Spin/400/600/800/1000/1200/1400 [WD(M)-14331(6)AD/WD-14335AD]
No Spin/400/600/800/1000/1200 [WD(M)-12331(6)AD]
specifications
may be varied without notice to raise the units
quality.
Accessories
Inlet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
5
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
n
Transit bolts
The
appliance
¥Packingand
is fitted with transit bolts to
prevent internal damage during transport.
all transit bolts must
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
n
Removing
middle
Packing Support
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
remove
(Packing support may not
be used depending on
models.)
Packing
the bolts
along
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
with the rubber
spanner for future
use.
bungs.
?
If
they
heavy
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
6
supplied.
?
Whenever the
appliance
is
transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
nstallation
I
n
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
under entire washer is 1˚
slope
Power outlet
:
Must be within 1.5 meters of either side of
location of washer. Do not overload the outlet
with
Laundry
Tub
more
than
one
appliance.
Additional Clearance
approx.
2cm
:
For wall, door and floor
(10cm
Do not
modeling is required.
rear /2cm:right & left side)
:
place
or
store
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
Positioning
n
Install the washer on a flat hard floor.
Make sure that air circulation around the washer is not
¥Nevertry to correct any
washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or
similar materials under the
¥Ifit is impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliances.
¥Thewasher must not be installed in rooms where the temperature can drop below 0¡C.
¥Pleaseensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
breakdown.
¥Withthe washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
n
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
Fuse
L
Blue(Neutral)
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may
not
correspond with
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the
by the
or
earth
symbol
coloured Green
or
or
the coloured
plug
markings identifying
which is marked with the letter E
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
(BS 1363) plug
is
used, fit
a
coloured Black.
or
coloured Red.
13 amp BS 1362 fuse.
7
nstallation
I
n
Electrical connection
1. Do not
2. If the
extension cord
use an
supply cord
is
or
damaged,
double
it must
adapter.
be replaced by the
person in order to avoid a hazard.
3. Always unplug the machine and turn off the water
4. Connect the machine to
an
manufacturer
supply after
or
its service
agents
or
similarly qualified
use.
earthed socket in accordance with current
wiring regulations.
5. The
appliance must be positioned so that the plug is easily accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by inexperienced persons
may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may burst under
pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing machine at room
temperature for a few hours before putting it into operation.
?
?
?
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
n
Washing
Machine is to be connected to the water mains
using
new
▶Water supply pressure
must
hose-sets and that old
hose-sets should not be used.
n
Connecting
water
supply
hose
be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the
valve.
?
Hose connector
?
Rubber seal
?
Hot water
tap
?
Cold
Cold
Hot(option)
water
tap
▶If the water supply pressure is more than 1000kPa, a
decompression device should be installed.
Two rubber seals are supplied with the water inlet
hoses
these are in order to prevent water leaks.
Check water tightness of washing machine connections
by turning the tap completely on.
Periodically check the condition of the hose and replace
the hose if necessary.
Make sure that there is no kink on the hose and that it is
not crushed.
▶When your washer has two valves,
?
The Inlet hose which has red connector is for the hot
water
?
8
tap.
If the washer has two
using hot valve.
valves, the energy is saved by
nstallation
I
Tap without
Normal
n
1.
Unscrew the
attach the
fixing
screw
thread &
2.
to
screw
Push the connector up till the
rubber
tap.
type inlet hose
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
n
1. Untighten
thread &
the upper connector
2.
touch
one
the rubber
packing
contact with the
Upper
Rubber
Connector
packing
Fixing screw
the 4
tighten
Middle
Rubber
connector
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
type inlet hose
Push the upper connector up till
screw.
Push the water
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
Connector
tap is
Water
hose
Middle
guide plate.
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
tap. Then pull the
inlet hose down, pushing the
plate
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
Square tap
9
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the Plug.
Disable the door lock to
prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
n
all
packaging
well away from children
Installation of drain hose
?
?
?
The drain hose should not be
than 100
?
?
cm
above the floor.
Proper securing of the
the floor from damage
drain hose will
due to water
When the drain hose is too
long,
back into the washer. This will
noise, malfunction, and
10
placed higher
water
protect
leakage.
do not force
cause
abnormal
leakage.
When
installing the drain hose to a sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
nstallation
I
Level
n
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
in
appliance
a corner
NOTE
of the
Timber
or
on a
solid and level floor surface,
room.
suspended type flooring
excessive vibration
If the floor is uneven,
2.
(do
※
not insert
preferably
load balance
adjust the adjustable
errors.
feet
as
required.
of wood etc. under the
feet)
Make sure that all four feet are stable and resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base
of the washer. All lock nuts must be tightened.
NOTE
pieces
or
may contribute to
In the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
that the
on a
raised
Diagonal Check
When pushing down the edges of the washing machine top plate
diagonally, the machine should not move up and down at all.
(Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally,
adjust the feet again.
Concrete floors
n
The installation surface must be clean,
?
Install washer
?
Tile floors
n
on a
flat hard floor.
on
sections and stick the
the Tread Mate and level the machine to suit.
pieces on
to the
dry tile where
Tread Mate is a self adhesive material used
※
level.
(Slippery floors)
Position each foot
?
dry and
on
machine is to
ladders &
(Cut Tread
be placed.)
Mate into 70x70
steps that prevents slipping.
Rubber
Wooden floors (Suspended
n
?
Wooden floors
?
To
If
※
※
floors)
particularly susceptible to vibration.
prevent vibration we recommend you place rubber cups under
possible
Cup
are
at least 15mm thick under the
?
mm
washer, secured
install the washer in
one
of the
each foot,
to at least 2 floor beams with
corners
It
purchased from
hardware suppliers.
※
screws.
of the room, where the floor is
more
can
be
stable.
Insert the rubber cups to reduce vibration.
Rubber cups ( p/no. 4620ER4002B ) can be purchasedfrom the LG spare parts
department.
Important!
and
levelling of the washer ensures long, regular and
absolutely horizontal and stand firmly in position.
reliable
?
Proper placement
?
The washer must be
?
It must not "Seesaw"
?
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
?
across corners
operation.
under load.
11
C
n
are
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
n
before
Caring
remove
add
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
before
during manufacturing.
washing
1. Care Labels
Look for
your clothes. This will tell you about the fabric content of your
garment and how it should be washed.
2.
a care
label
on
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
soiled items with lightly soiled one.
Soil
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
n
before
Combine
large
Separate
Separate
clothes
to amount of soil.
according
white fabrics from colored fabrics.
Wash lint
producers
separately.
and lint collectors
loading
and small items in
a
than half the total wash load.
Do not wash single items. This may
load. Load
cause an
large
items first.
out-of-balance load. Add
?
Check all
that
items should not be
Large
one or
pockets
two similar items.
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
more
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
that these items don't
other clothes.
Pre treat dirt and stains
a
strings
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
12
shift dirt.
A
dding detergent
Adding detergent
1. The
Dispenser
and fabric softener
3.
Drawer
Detergent dosage
?
The
?
If too
max
detergent should be used according to the
instruction of the detergent manufactrurers.
much
can occur
result
?
heavy load to the
malfunction)
or cause
If there are too many suds,
quantity must be reduced.
Use
too many
and this will decrease the
(Causing a
?
detergent is used,
the
suds
washing
motor.
detergent
specified Front loader washing powder
only.
?
Main wash
only
?
?PreWash+MainWash
2.
hardness, size and soil level of the load.
For best results, avoid oversudsing.
Adding Fabric Softener
(
)
Detergent usage may need to be
adjusted for water temperature, water
MAX
MAX
125 ml
125ml
Tips
?
Full load
according
:
to
manufacturer's
recommendation.
?
Do not exceed the maximum fill line.
?
Part load
Overfilling
?
Minimum load
can cause
early dispensing
:
3/4 of the normal amount.
:
1/2 of full load.
of the fabric softener which could stain
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
Softener will
during
?
the
automatically
last rinse cycle.
days.
be added
The soap drawer can be partially
opened to add pre dissolved soap
powder during
?
2
Detergent is flushed from the dispenser
at the beginning of the cycle.
the initial fill.
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly on the clothes
13
unction
F
Recommended
(
)
:
according
courses
to the
WD-12331(6)AD
Fabric
Program
First check if
Proper
Temp.
(Option)
Type
30˚C
(Cold, 40˚C)
If the
Program setting
Intensive
:
80
3.0kg
52
2.0kg
50
2.0kg
44
4.0kg
30
Rinse Hold
(30˚C)
30˚C
Select the water
temperature to the wash cycles.
Always follow garment manufacture's care label or instructions
laundry
is
laundering.
heavily
with "Intensive"
If the
soiled "Intensive"
option
option
is effective.
for test in accordance
laundry
is
heavily soiled,
or
in
conformity
with
"Pre Wash" Cotton is recommended.
Pre Wash is available in Cotton and
14
(100)
4.0kg
EN60456 and IEC 60456.
Pre Wash
103
Rinse+
Cold
soiled.
when
:
Dry
(Cold, 40˚C)
Quick 30 Coloured fast laundary
:
Rating
30˚C
"Hand Wash" marked
delicate and wool laundry.
lightly
Rinse+
Pre Wash
(30˚C,60˚C)
laundry easily
damaged.
Intensive
(137)
Rinse Hold
(30°C, 40°C,
60°C-Eco)
Delicate
Temperature
Rating
40˚C
Wool/Silk Machine washable woolens
with pure new wool only.
Water
Minutes
140
60˚C
Synthetic Polyamide, Acrylic,
Polyester.
which is
Load
in
Intensive
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton(underwear...)
Hand
Wash
Option
95˚C
Colour fast gaments
Delicate
Maximum
linen towel
(white cotton,
and sheets...)
Time
is
laundry
machine washable.
Cotton
laundry type
Synthetic Program.
washer
ow to use
H
1. Cotton
selected upon power
?
Press the
?
Press the
?
Initial conditions
-
-
-
Power(
)
:
main wash
Rinse
:
3 times
Spin
1400 rpm
-
-
:
Press the
?
Select the conditions which you want to
use, by turning the program dial and
Power(
)
button to start.
each button.
selecting the each conditions, please
refer to the page16~page23
For
[WD(M)-14331(6)AD
WD-14335AD]
[WD(M)-12331(6)AD]
Water temperature
Program
button.
?
pressing
/
1200 rpm
)
Selecting
on.
button to start.
Start/Pause(
Wash
:
2. Manual
automatically
:
?
Press the
Start/Pause(
)
button.
60˚C
Cotton
15
ow to use
H
(1)
(2)
(3)
(4)
Dial
:
washer
Program
Button
:
Start / Pause
Button
:
Intensive
Button
:
Rinse Hold
(5)
(6)
(7)
(8)
Button
:
Rinse+
Button
:
Pre Wash
Button
:
Dry
Button
:
Child Lock
(9) Button :
(10) Button
(11) Button
Power
:
Spin
:
Time
Delay
Option
?
By pressing the
Option button,
all Option
functions may
be selected.
Rinse+
-
Intensive
-
-
Rinse Hold
-PreWash
?
If the
?
laundry heavily
option is effective.
?
option, the wash
extended, depending on the
?
To
into
proceed
the Rinse Hold button
a
Drain
or
Spin
function after
16
then press the Start/Pause button.
laundry
is
heavily soiled,
course
is effective.
Dry
?
When you want to
?
Available in Cotton and
?
Please note that the
kg.
Please
dry,
select this button.
Synthetic.
drying capacity
remove excess
is
clothes
from the
completed wash before
comencing the drying and ensure
a
cold water
Rinse hold, select Drain on the program dial or
press the Spin selector button to the desired
speed,
increased.
Pre Wash is available in Cotton and
3.5
spin.
to
If the
5.
by pressing
are
the rinse
Synthetic.
the Intensive
this function leaves clothes in the machine;
suspended in the water after a rinse without
entering
By selecting Rinse+ function,
"Pre Wash"
soiled "Intensive"
2. Rinse Hold
Is selected
For additional rinse which may assist in
removing traces of detergent residue.
4. Pre Wash
time may be
program selected.
?
?
-Dry
is
By selecting
?
time and the rinse water
1. Intensive
?
3. Rinse+
The
tap is left
required lamp
will
that the
on.
light up for identification.
H
ow to use
washer
Spin
[WD(M)-14331(6)AD/WD-14335AD]
?
By pressing the Spin button, the spin
speed can be chosen and the LED of
is turned
[WD(M)-12331(6)AD]
1.
Spin selection
rpm
on.
?
Spin Speed
the program
?
is available
as
according
to
follows.
WD(M)-14331(6)AD /
WD-14335AD
Cotton, Rinse+Spin, Quick 30
-
NoSpin-400-600800-1000-1200-1400
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Spin only:
Delicate
-
1. Press the Power buton.
2. Set the desired
the
Spin
spin speed by pressing
NoSpin-400-600-800
?
button.
WD(M)-12331(6)AD
Cotton, Rinse+Spin, Quick 30
-
3. Press the Start/Pause button.
NoSpin-400-600-8001000
-
1200
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
Delicate
-
NoSpin-400-600-800
2. No
?
If
spin
spin is selected,
after draining water.
no
the washer
stops
17
H
ow to use
Water
washer
Child Lock
Temp.
If you choose to lock
the buttons on the
control
assembly to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
can
be set
by pressing
the
Rinse+ button and Pre Wash button
?
the
By turning
temperature
-
the water
Program Dial,
can
simultaneously. (About
be selected.
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water
temperature
according
can
be selected
to the program.
The
required temperature lamp
for identification.
For the
more
detailed
will
?
When child lock is set, all buttons
except for power button.
?
To deactivate Child Lock
light up
are
locked
system, press
Rinse+ and Pre Wash buttons
information, please
simultaneously again. (About three seconds)
refer to the page14.
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both Rinse+ and Pre Wash
once
together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
?
The child lock
it is
automatically
operational errors
18
be set at any time and
canceled when
can
occur.
works when power is off.
Also Child Lock
ow to use
H
washer
Dry
The
drying capacity for this model
is 3.5 kg. Please remove
approprate excess weight before
commencing the drying cycle.
NOTE
?
?
This
guide
Cycles
to
sensors measures
dry
most
the
temperature of the exhaust to increase
or decrease drying temperatures for
selected
faster reaction time and
For
temperature control.
easily.
most even drying
sure
,
all articles in the
are
similar in
?
Recommand Automatic
clothes
For
able to tumble
NOTE: The estimated
dryer by
If you open door and
dryer has finished its
freely.
remove
cycle,
load before
remember to
press the Start/Pause button.
the DRY button, you
can
Synthetics
select
too many articles
into drum. Items must be
Do not overload
tighter
drying
course
for
type.
a)
b)
c)
d)
stuffing
By pressing
Use your Automatic
loads.
Electronic
material and thickness.
?
Automatic
automatical process from
washing to drying can be
clothes load
?
?
washer-dryer's
make
?
1.Drying
-
Low
Temp.
If you want to iron clothes-Less.
For Cottons select Normal
-
For washable
nappies
select
drying
-
More
time varies
from the actual
drying time with an
Automatic. The type of fabric, size of the
load, and the dryness selected, do affect
the drying times.
select
Normal
Low
Temp.
More
Time
Less
19
washer
ow to use
H
Dry
2.Drying
time
Fiber
guide
-
?
?
press the Dry button, the
can be selected.
By
Drying
course can
drying
time
last up to 150min.
selecting drying only, drying
course will start after spining. (The
spinning time is about 19~22min.)
These
drying
times
given
dryer for
are
as a
-
-
experience
will be your best
a)
b)
c)
guide.
Woolen Articles
-
dry woolen articles. Pull
original shape and dry them flat.
Woven and
-
-
Some
Loopknit
Materials
loopknit materials may
shrinks, by varying amounts, depending on
quality.
woven
Always
drying.
and
stretch them out
immediately
Permanent Press and
-
-
them to
Do not overload your
Take out
after
Synthetics
dryer
permanent press articles
the dryer stops to reduce wrinkles.
20
their
as soon as
Night
Gowns
check the manufacture's instructions.
dry any items made
or plastics, such as:
-
from
or
containing
aprons, bibs, chair covers
curtains and table cloths
bathmats
Fiber
Do not tumble
their
Do not
rubber
temperature and type of fabric and your
own
clothes and
Rubber and Plastics
guide
manual
help you set your
drying. Drying times can vary greatly
depending on dampness, room
to
Always
Leather Materials
check the manufacture's instructions.
Baby
When
?
Always
or
Do not
glass
dry fiberglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time
you use the dryer and irri tate your skin.
H
washer
ow to use
Time
1. Time
Program
Delay
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
?
How to set "Time
-
-
?
Delay"
Program dial to select
the program you require.
Press Time Delay button and set
will
up to indicate selected
light
If Time
?
is
button is
Delay
displayed. The
Program
the
When Start/Pause button is
the Cotton program is
selected.
(":" blinks.)
"3:00"
pressed,
maximum delayed
time
is 19 hours and the minimum time is
?
Lamp
1.
Press the Start/Pause button.
-
?
to the
Turn the
desired time.
?
according
program.
Press Power button.
-
available
are
laundry type.
in the drawer.
?
8 programs
-
By turning
the
-
-
Each
button advances
Wool/Silk
on
hour.
delay,
press the
the
"
Rinse+Spin
To cancel the time
Program dial,
program is selected in order of
Cotton
Delicate
Quick 30
3 hours.
pressing of the
time delay by one
pressed,
automatically
-
-
Drain
-
-
Hand Wash
Synthetic".
For
information regarding laundary type
for each program, please refer to page 14.
Power button.
?
?
Time
'expected time' from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
Delay
is
According to the
-
condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
21
ow to use
H
washer
Start/Pause
Power
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
Press the Power button to turn power
and off
?
To cancel the Time
cycle.
power button
2. Pause
?
?
?
2. Initial
If
temporary stop of wash cycle is
needed, press the Start/Pause button.
?
or
at the end of the wash
the
pressed,
for Cotton program.
And the other initial conditions as
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD(M)-14331(6)AD / WD-14335AD]
-
Cotton
Program
/ Main Wash /
Normal Rinse / 1400 rpm / 60˚C
[WD(M)-12331(6)AD]
-
Cotton
Program
/ Main Wash /
Normal Rinse / 1200 rpm / 60˚C
22
the
Program
When the Power button is
washer is
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
Delay function,
should be pressed.
on
H
ow to use
washer
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed.
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
?
During washing cycle, the remaining
washing time is displayed.
?
Recommended program
manufacturer.
"
"
?
4. Time left
When time
delay is selected, it shows
the remaining time to finish the selected
(
program.
-
)
:
WD-12331(6)AD
Cotton 95˚C
:
around 2 hours and
-
2. Self
diagnosis display
?
If the machine encounters
operation,
displayed.
a
fault
during
"
"
"
"
"
"
the associated fault will be
-
:
Water pressure
:
Problem of
:
Door is not closed
:
Water inlet trouble
:
Drainage
:
Unbalanced load
"
"
"
"
"
sensing
overfilling
error
-
water
"
"
"
"
-
-
trouble
:
Water temperature trouble
:
Over load in motor
:
Over load in motor
"
"
"
:
Dry
heater
or
thermostat
trouble.
If these error letters are displayed, please
refer to the troubleshooting page29 and
follow the guide.
minutes
:
43(40)
minutes
:
Delicate
around 52 minutes
:
Wool/Silk
:
around 50 minutes
Hand Wash
:
around 44 minutes
-
?
"
Synthetic
20(17)
around 1 hour and 20 minutes
-
"
Cotton 60˚C
around 1 hour and
-
by
Quick 30
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
around
21(18)
minutes
The
washing time may vary by the
amount of laundry, water pressure,
water temperature and other washing
conditions.
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45 minutes.)
23
aintenance
M
Before
cleaning the washer interior, unplug the electrical
power cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
door lock to
n
of the
cut off the mains
appliance,
cable, and destroy the plug Disable the
prevent young children being trapped inside.
The water inlet filter
"
-"
message will blink
drawer.
error
detergent
If your water is very hard
-
or
on
the control
panel
contains traces of lime
when water does not enter the
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten up
the inlet
a
hard bristle
hose.
brush.
n
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
filter is clean to
1.
Open
pull
smooth
laundry.
running of your
using "Drain" program and
remove tangled threads or foreign objects.
Be careful when draining if the water is hot.
or
the lower
opening
cover
cap ( ) by using
coin. Drain plug (
to
ensure
left in the
First drain the water
Allow the water to cool down before
emptying
objects
a
)
out the hose.
the door in
2.
an
cleaning
water
carrying
out emergency
emergency.
use a
flowing
then open the pump filter to
the drain pump,
Unplug the drain plug ( ),
allowing the water to flow out.
this time
machine.
vessel to
on
3. Remove any
At
prevent
to the floor. When
foreign
from the pump filter
cleaning,
close the lower
cover
cap.
100
3
1
24
3
( )
)to the original place.
the pump filter
2
After
clockwise and insert the drain
plug (
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
2
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
deposit
?
It should be cleaned from time to time with
?
If necessary it can be removed completely from the machine
downwards and by pulling it out.
?
To facilitate
cleaning,
the upper
a
jet
of
a
running
in the drawer.
water.
by pressing
part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
recess
Detergent can also accumulate inside the recess
be cleaned occasionally with an old toothbrush.
?
Once you have finished cleaning,
rinse cycle without laundry.
The
?
washing
replace
the drawer and
If you live in a hard water area, limescale may
seen and thus not easily removed.
?
The
?
If you
continuously
appliances,
build up in
and if it is not
kept
places
in check,
washing drum is made of Stainless steel, specks of rust can
articles (paper clips, safety pins) which have been left in the drum.
Although
metal
run a
drum
Over time the build up of scale clogs
maintenance or repairs may result.
?
which should
the
washing
use
where it cannot be
expensive
be caused
by
small
drum should be cleaned from time to time.
descaling agents, dyes
or
bleaches, make
sure
they
are
suitable for
washing
machine
use.
Descaler may contain chemicals that may
Remove any
Never
use
spots with
a
stainless steel
damage part
of your
washing
machine.
cleaning agent.
steel wool.
25
aintenance
M
Cleaning your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
off any
Immediately wipe
not to hit surface with
Try
water and a neutral non abrasive
warm
IMPORTANT: Do not
spills. Wipe
with
cloth.
damp
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
Repeat process
a
complete cycle using
gasket
and door
glass.
hot water.
if necessary.
Remove hard water
NOTE
flexible
opening,
deposits using only
cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
where
an area
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing may
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
26
a
an
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer
8. Store washer in
for 1minute to drain out all water.
drain and
excessive water from the
dry
compartments.
uprignt position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
roubleshooting guide
T
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads may produce
a thumping sound. This is usually
If sound continues, washer is
probably out of balance. Stop and
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
been removed?
Are all the feet
the
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks, and vibration during spin.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
Fully
is not
hose(s)
are
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
Clean and
straighten
the drain hose.
or
clogged.
Clean the drain filter
27
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
Electrical power cord may not
be plugged in or connection
?
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
Water
?
supply tap
is not turned
Turn
on
circuit overload, have
a qualified electrician.
a
by
water
replace fuse.
capacity.
or
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Once started, the door can not be
opened for safety reasons.
Door does not open
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
Dry problem
?
Does not
dry
removing
Do not overload.
Check that the washer is
properly to
extract
draining
adequate water
from the load.
Clothes load is too small to tumble
property. Add
28
a
few towels.
T
roubleshooting guide
Possible Cause
Symptom
?
?
Water
supply is not adequate in area
Water supply taps are not completely
open.
Water inlet
Solution
Check another
tap in the house.
Fully open tap.
hose(s) are kinked.
The filter of the inlet hose(s) are
clogged.
Straighten hose(s).
Drain hose is kinked
clogged.
The drain filter is clogged.
Clean and
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning
?
?
?
?
appliance
has
or
unbalance
an
detection and correction
system. If
Check the filter of the inlet
straighten the
hose(s).
drain hose.
Clean the drain filter.
or
2 similar items to
help
load to allow proper
individual
?
heavy articles are loaded (ex.
bath mat, both robe, etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
?
Is the door
opend
or not completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the power plug and call for service.
?
Water overfills due to the
faulty water
valve.
Close the water
tap.
Unplug the power plug.
Call for service.
?
Water level
?
Over load in motor.
?
Over load in motor.
?
sensor
Check water
has malfunctioned.
supply.
Turn the
If"
plug
tap
"
on
is not released,
and call service.
unplug
power
29
T
of
erms
Warranty
What Is Not Covered:
?
Service
?
If the
product
rating plate.
?
If the fault is caused
by accident, neglect,
?
If the fault is caused
by
trips
to your home to teach you how to
is connected to any
voltage
use
the
product.
other than that shown
misuse
on
the
Act of God.
or
factors other than normal domestic
use or use
in
accordance with the owner's manual.
?
Provide instruction
?
If the fault is caused
?
Noise
or
on use
by pests
product
for
or
change
example,
rats
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
the
or
set-up of the product.
cockroaches etc..
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
Normal maintenance which recommended
?
Removal of
/ substances from the machine, including the
pump and inlet hose filter for example, grit, nails, bra wires, buttons etc.
?
Replace
?
Correction of unauthorized
?
Incidental
consequential damage
possible defects with this appliance.
?
If this
by
the owner's manual.
foreign objects
fuses in
or
correct house
or
correct house
plumbing.
repairs.
or
product
wiring
to
personal property
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
30
of
a
Download PDF