LG | WM-10240F | LG WM-10240F Owner’s Manual

P/No.: 3828ER3026A
Washing
Machine
OWNER'S MANUAL
WD(M)-10240(5)F
WD(M)-80240F
WD(M)-65240F
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Auto Restart
If the
turned off
restart
the
washing machine is
automatically from
accordingly.
by a power failure, it will
position it stopped at adjusting
Jumbo drum
40%
LG's
jumbo
drum
can
conventional
washing
performance.
wash
More economical
Intelligent
Wash
wash about 40%
machines. A
more
bigger
load than
drum
improves
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
and
washing
the
water level
time to minimize energy and water
consumption.
Child-Lock
The Child-Lock system has been used to prevent children
from pressing any button to change the program during
operation.
Low noise
speed control system
the amount of load and balance, it evenly
distributes load to minimize the spinning noise level.
By sensing
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
exposed
or
store the washer where it will
?
to the weather.
?
?
published user-repair instructions
dry articles that have been
or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
?
garment manufacturer's wash and
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
on,
with,
hang
Never reach into washer while it is
laundry process
retardant of fabrics.
can
or
try to
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
The
?
inside
crawl inside the washer.
until the drum has
Do not slam the washer door closed
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this appliance
is used by or near children.
the door
?
Do not wash
out.
play
this or any other appliance.
?
using
that you understand and have the skills to carry
Do not allow children to
?
to persons when
cleaned in, washed in, soaked in,
recommended in the user-maintenance
or
injury
precautions, including the following:
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
instructions
or
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor
shock. Check with
can
result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
a
-
3
S pecification
Power
plug
If the
supply cord is damaged,
must be replaced by the
it
manufacturer
Drawer
or a
(For detergent and
fabric softener)
order to avoid
or
its service agents
person in
similarly qualified
a
hazard.
Control panel
Drum
Door
Lower
cover
Adjustable feet
Lower
Drain pump filter
Drain
cover
plug
Name
Power
supply
Size
Weight
Wash
/ Max.Watt
capacity
Spin speed
Water
The appearance and
units
:
Front
:
220-240V~,50Hz
:
600mm(W)
loading washing
machine
600mm(D)
850mm(H)
/ 2200W
:
67kg
:
7kg
:
No
Spin/400/500/650
[WD(M)-65240F]
No
Spin/400/600/800
[WD(M)-80240F]
No
Spin/400/800/1000 [WD(M)-10240(5)F]
:67
consumption
Permissible water pressure
:
(9.6
0.3-10kgf/
specifications
/kg)
(30-1000kPa)
may be varied without notice to raise the
quality.
Accessories
Spanner
4
cap
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Install
Transit bolts
The
appliance is fitted
Removing
with transit bolts to
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
bungs.
?
?
If
they
are
not
removed, it may
use.
cause
heavy
Whenever the
appliance is transported, the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
Installation place requirement
Level floor
Drain Hose
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
Washer
than one appliance.
Additional Clearance
Laundry
Tub
approx.
2cm
:
For wall, door and floor
(10cm
: rear
/2cm:right
modeling is required.
side)
& left
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
E
Brown(Live)
Blue(Neutral)
must be earthed
L
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
6
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
nstallation
I
Electrical connection
1. Do not
3.
4.
5.
?
?
?
extension cord
double
adapter.
supply
replaced by the manufacturer or its service agents
damaged,
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
use an
or
it must be
cord is
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing Machine
is to be connected to the water mains
sets and that old hose-sets should not be used.
Connecting
water
using
new
hose-
supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kgf/cm2)
strip or crossthread when
Inlet hose to the valve.
Don't
connecting
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
Hot water
?
tap
Cold
Cold
Hot(option)
Make sure that there is no kink
hose and that it is not crushed.
on
the
water
When your washer has
tap
?
?
two
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
(Single
inlet
models)
2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight
to the middle connector,
contact with the tap. Then
pushing the plate down.
tighten the 4 screws.
Middle
Rubber
connector
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment is
not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk of
suffocation ! Keep all packaging well away from children
Turn off the
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
cm
?
Laundry tub
ca.
100
cm
Hose
Retainer
ca.
145
cm
Tie
max.
ca.
?
?
?
105
cm
min.60cm max.10cm
100cm
max.
100cm
min. 60cm
strap
min. 60cm
The drain hose should not be
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
appliance on a solid and level
preferably in a corner of
floor surface,
the room.
2. If the floor is uneven,
adjust the
adjustable feet as required. (do not
insert pieces of wood etc. under the
Lock
nut
Make
sure
that all four feet
are
feet)
stable
resting on the floor and then check
appliance is perfectly level.
(use a spirit level)
After the washer is level, tighten the
and
that the
Adjustable feet
Higher
Adjustable feet
Lower
*
lock nuts up towards of the base of the
washer. All lock nuts must be
tightened.
Adjustable feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally, the
machine should not
all.
move
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
same
wash
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
3.
causing discoloration of white
lightly soiled one.
can occur
soiled items with
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
before
etc. If
possible, do
clothes
according
not wash
heavily
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all pockets to make sure
they are empty. Items such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hooks and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
?PreWash+MainWashU
2.
)
MAX
MAX
125 ml
125ml
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
Full load
can cause
Do not leave the fabric softener in the
2
days.
Softener will automatically be added
the last rinse cycle.
during
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
clothes.
?
according
:
manufacturer's recommendation.
of the fabric softener which could stain
?
detergent only for the front
Tips
Do not exceed the maximum fill line.
Overfilling
a
washer.
Part load
?
(Causing
results, avoid oversudsing.
Adding Fabric Softener
(
motor.
the clothes
at
F
unction
Recommended
according
courses
Fabric
to the
Maximum
Proper
Program
Option
Type
First check if
Load
Temp.
laundry
is machine
(white
Time
in
in
kWh
Minutes
Time Save
Rinse+
cotton, linen
towel and
Energy
Pre Wash
95˚C
washable.
Cotton
laundry type
Rating
2.74
158
Rating
1.33
154
Less than
0.45
88
0.41
58
0.28
58
0.03
57
0.35
30
Crease Care
sheets...)
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
60˚C
Time Save
(Cold, 30˚C,
Rinse+
40˚C)
Crease Care
soiled white
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Delicate
Delicate
laundry
easily damaged
(curtains...)
Wool/Silk
Machine washable
woolens with pure
new
wool
or
silk
only
Hand
"Hand Wash" marked
Wash
delicate and wool
laundry
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
If the
Pre Wash
40˚C
(60˚C, Cold,
30˚C)
Time Save
Rinse+
Time Save
(40˚C, Cold)
Rinse+
30˚C
Time Save
(40˚C, Cold)
Rinse+
Cold(30˚C,
40˚C)
Time Save
laundry is heavily soiled, "Pre
Synthetic Program.
kg
Crease Care
30˚C
30˚C(40˚C,
Cold)
3.5
Rinse+
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
Rinse+
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
Cotton and
Rinse+: Used to introduce
an
additional rinse, which may assist in
removing
traces of
detergent
residue.
13
H
ow
1. Cotton
to
use
washer
?
?
?
2. Manual
automatically
selected upon power
Press the
Power(
) button
Press the
Start/Pause(
to start.
) button.
?
?
-
-
:
main wash
Rinse
:
3 times
Spin
1000 rpm [WD(M)-10240(5)F]
800 rpm [WD(M)-80240F]
650 rpm
-
-
14
:
) button
to start.
Select the conditions which you
by pressing each
selecting the each conditions, please
refer to the page15~page20
For
[WD(M)-65240F]
Water temperature
Program
Power(
button.
Wash
:
Press the
want to use,
Initial condition
-
Selecting
on.
Cotton
:
60˚C
?
Press the
Start/Pause(
) button.
ow
H
to
[1]
(1)
(2)
(3)
washer
use
[2]
[3]
Button
:
Power
Button
:
Program
Button
:
Start/Pause
[4]
(4)
(5)
(6)
Button
:
Button
:
Button
:
[5]
[6]
Spin
Temperature
Option
(7) Child
[7]
Lock
Option
?
By pressing the
Option button,
all Option
2. Time Save
?
functions may
be selected.
?
-
-
-
-
?
If the
?
course
this
option press the Time
once
before the wash
This
option is
not available with
Quick 30 program.
?
is effective.
Synthetic.
required lamp will light
identification.
Used to additional rinse, which may
removing traces of detergent
assist in
residue.
Pre Wash is available in Cotton and
The
use
be used to reduce
wash program.
3. Rinse+
laundry is heavily soiled, "Pre
Wash"
?
Crease Care
1. Pre Wash
To
can
a
program is started.
Time Save
+
option
Save button
Pre Wash
Rinse
This
the time of
?
By selecting Rinse+ function, the rinse
time and the rinse water
up for
are
increased.
4. Crease Care
?
If you want to prevent crease, select
this button with spin speed.
15
H
ow
to
use
washer
Spin
2. No Spin
?
If
spin is selected, the washer
stops after draining water.
no
The
required lamp will light
identification.
up for
3. Rinse Hold
?
[WD(M)-65240F]
?
[WD(M)-10240(5)F]
[WD(M)-80240F]
By pressing the Spin button, the spin
speed can be chosen.
1. Spin selection
?
Is selected by pressing the spin button
repeatedly this function leaves clothes
in the machine; suspended in the water
after a rinse without entering into spin.
To
proceed through
once
?
Spin speed
is available
the program
?
as
according
to
follows.
WD(M)-65240F
-
Cotton &
Synthetic
& Wool/Silk &
Hand Wash & Delicate & Quick 30
Rinse Hold
-
No
Spin
-
400-500-650
?
WD(M)-80240F
-
Cotton &
Synthetic
& Wool/Silk &
Hand Wash & Delicate & Quick 30
Rinse Hold
-
No
Spin
-
400-600-800
?
WD(M)-10240(5)F
-
Cotton &
Synthetic
& Wool/Silk &
Hand Wash & Quick 30
Rinse Hold
-
No
Spin
-
400-800-1000
-
Delicate
RinseHold-NoSpin-400-800
16
to a drain or
spin,
the rinse hold function is
completed using to Program button and
Spin button to the required program.
(Spin or Drain)
The required lamp will light
identification.
up for
to
ow
H
use
washer
1. Child Lock
Water Temp.
?
By pressing the Temp.
?
button, the water
temperature can be
Child Lock
can be set by pressing
holding the two Option buttons
simultaneously.
and
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
(All program lamps blink)
1. Water Temperature
?
-
Water temperature can be selected
below according to the program.
?
as
?
Cotton
When child lock is set, all buttons
are
inoperable except power button.
To deactivate Child Lock system, press
the two Option buttons simultaneously
again.
Cold-30˚C-40˚C-60˚C-95˚C
-
Synthetic
Cold
-
-
30˚C
-
40˚C
-
60˚C
Delicate & Wool/Silk & Quick 30 &
Hand Wash
Cold
-
30˚C
-
40˚C
?
The
required temperature lamp will light
up for identification.
For the
more
detailed
If you choose to lock the buttons on the
control assembly to prevent tampering this
function may be selected.
?
1. Press both the two
together
once
Option
again.
buttons
3. Select the desired program and press the
Start/Pause button
?
The child lock
is
NOTE
Program lamps
same
time after the power off or the end of
the child lock mode is set.
are
blinked at the
again.
be set at any time and it
canceled when operational
can
automatically
errors occur.
If the
the
to the desired program, whilst in
2. Press the Start/Pause button.
Child Lock
?
change
child lock mode.
information, please
refer to the page13.
To
Also Child Lock works when
power is off.
washing,
Cancel the child lock mode
two
Option
buttons
by pressing the
simultaneously for 3
seconds.
17
H
ow
to
washer
use
Program
?
?
8 programs are available
the laundry type.
Lamp
will
light
according
to
up to indicate selected
program.
(Program)
1. Program
?
2. Course
When Start/Pause button is
pressed,
the Coloureds program is
automatically selected.
-
By turning the Program dial, the
program is selected in order of
"Cotton
Synthetic Delicate
-
Wool/Silk
-
-
Rinse+Spin
Regarding
Hand Wash
18
-
Quick 30
Drain".
-
to the
program Please
-
laundry type for each
refer to the page13.
-
-Cotton
-Wool/Silk
-Rinse+Spin
-Synthetic
-Hand Wash
-Drain
-Delicate
-Quick 30
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
This
1. Power
Start/Pause( ) button is used
cycle or pause the wash cycle.
to start
?
wash
2. Pause
?
If temporary stop of wash
press the
?
?
Start/Pause(
on
2. Initial Program
cycle is needed,
) button.
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
Press the Power button to turn power
and off
at the end of the wash
cycle.
?
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD(M)-65240F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/650
[WD(M)-80240F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/800
[WD(M)-10240(5)F]
-Cotton
Program/Main Wash
rpm/60˚C
Normal Rinse/1000
19
H
ow
to
use
washer
Time Left
?
Recommended program
-
-
-
-
-
-
-
-
-
?
?
by
manufacturer.
Cotton 95˚C
:
around 2 hours and 38 minutes
Cotton 60˚C
:
around 2 hours and 34 minutes
Synthetic
:
around 1 hour and 28 minutes
Delicate
:
around 58 minutes
Wool/Silk
:
around 58 minutes
Hand Wash
:
around 57 minutes
Quick 30
:
around 30 minutes
Rinse+
:
around 19 minutes
:
around 1 minute
Spin
Drain
The
time may vary by the amount of
and
other washing conditions.
temperature
If
an
washing
unbalanced load is detected
or
the wash time may be extended.
(Max. increasing time is 45minutes.)
20
laundry,
if the suds
water pressure, water
removing
program operates,
M
aintenance
Before
the washer interior,
cleaning
the electrical power cord to avoid electrical
unplug
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
-
Rinse+ and Crease Care
the
-
detergent
If your water is very hard
become
lamps will
blink
the control
on
panel
when water does not enter
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your machine.
the drain and then open the pump filter to
remove
whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
the door in
2.
this time
plug(
water
the hose.
cleaning
the drain pump,
use a
flowing
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
)topullout
an
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
(
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
After
turn the pump filter
water does not flow any more, turn
( )
material
( ).
original place.
cover
cap.
100
3
1
3
2
2
21
)
aintenance
M
Dispenser drawer
After
?
?
?
a
while
To facilitate
cleaning,
Detergent
can
be cleaned
?
?
deposit
in the drawer.
water.
by pressing
with
occasionally
an
washing
recess
replace
the drawer and
run a
drum
continuously
clogs appliances,
build up in
and if it is not
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
washing
If you
use
be removed.
which should
metal articles
the
can
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
Although
the catch
recess
also accumulate inside the
Over time the build up of scale
be replaced.
?
a
jet of running
the upper part of the fabric softener compartment
Once you have finished cleaning,
rinse cycle without laundry.
The
?
a
If necessary it can be removed completely from the machine
downwards and by pulling it out.
The drawer
?
and fabric softeners leave
detergents
It should be cleaned from time to time with
descaling agents, dyes
or
bleaches, make
sure
they
kept
places where
in check these may have to
of rust
can
be caused
Remove any spots with
Never
22
use
steel wool.
a
stainless steel
damage part
are
of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler may contain chemicals that may
it cannot be
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirits, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners
labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
This
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
out of balance.
If not removed
been removed?
Are all the feet
the
probably
Stop
and
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
clogged.
are
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
or
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
by a qualified electrician.
on water supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other usage conditions.
If the imbalance is detected or if the
suds removing program works, the
wash time shall be increased.
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
Water
Water
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
are
Check another tap in the house.
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Solution
clogged.
Check the filter of the inlet hose.
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance
detection and correction system. If
individual heavy articles are loaded
(ex.
bath mat, both robe,
or
drain hose.
2 similar items to
help
load to allow proper
etc.) this system
interrupt the
may stop spinning
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
or even
?
Close the door.
?
Is the door
If "door error" is not
opened?
service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
?
?
26
Water level
Close the water tap.
Unplug the power
Call for service.
sensor
Over load in motor.
has malfunctioned.
plug.
released, call for
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
by
of
product
pests for
change
or
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
example, grit, nails,
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
wiring
or
correct house
product
the
plumbing.
repairs.
Incidental or consequential damage to personal property
possible defects with this appliance.
If this
including
bra wires, buttons etc.
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27
Download PDF

advertising