LG | WM-1295FHB | LG WM-1095FHB Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WD(M)-1390(5)F(H)B
WD(M)-1290(5)F(H)B
WD(M)-1190(5)F(H)B
WD(M)-1090(5)F(H)B
WD(M)-8090F(H)B
Thank you for
LG
Fully
buying a
Washing
Automatic
machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
40%
?
Jumbo drum
LG's
jumbo
drum
conventional
can
washing
wash about 40%
machines. A
more
bigger
load than
drum
improves
the wash
performance.
?
Protection
against
wrinkles
With the alternate rotation of the drum,
wrinkling
in the
laundry
is
minimized.
?
More economical
by Intelligent Wash System
System detects the amount of load and water
temperature, and then determines the optimum water level and
washing time to minimize energy and water consumption.
Intelligent
?
Wash
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
?
Low noise
speed
control system
By sensing the amount of load and balance, it
load to minimize the spinning noise level.
?
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
2
.............................................................24
W arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
exposed to the weather.
recommended in the user-maintenance
?
?
published user-repair instructions
or
garment manufacturer's wash and
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
?
on,
with,
Do not slam the washer door closed
or
try to
?
inside
To minimize the
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this appliance
is used by or near children.
the door
?
?
out.
play
this or any other appliance.
?
dry articles that have been
or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
that you understand and have the skills to carry
Do not allow children to
?
Do not wash
using
cleaned in, washed in, soaked in,
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
instructions
to persons when
hang
on
crawl inside the washer.
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper
outlet, consult
an
electrician.
WARNING : Improper connection of the equipment-grounding conductor
shock. Check with
can
result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
a
-
3
S pecification
Power
plug
If the
supply cord is damaged,
it must be replaced by the
manufacturer or its service agents
or a similarly qualified person in
Drawer
(For detergent and
fabric softener)
order to avoid
a
hazard.
Control panel
Drain hose
Door
Lower
cover
Drum
Adjustable feet
Drain pump filter
Lower
Drain
cap
plug
?
Name
?
Power
supply
:
Front
:
220-240V~,50Hz
600mm(W)
63kg
7kg
?
Size
:
?
Weight
Wash capacity
:
?
Max. Watt
:
?
Spin speed
:
?
cover
:
loading washing
machine
600mm(D)
850mm(H)
2100W
No
Spin/400/600/800[WD(M)-8090F(H)B]
Spin/400/600/800/1000[WD(M)-1090(5)F(H)B]
No Spin/400/600/800/1100[WD(M)-1190(5)F(H)B]
No Spin/400/800/1000/1200[WD(M)-1290(5)F(H)B]
No Spin/400/800/1100/1300[WD(M)-1390(5)F(H)B]
:75 (10.7 /kg)
: 0.3-10kgf/
(30-1000kPa)
No
?
Water
?
Permissible water pressure
consumption
The appearance and
specifications
may be varied without notice to raise the units
? Accessories
Inlet
4
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
? Transit bolts
The
?
appliance is fitted
Removing
with transit bolts to
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance is transported, the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
nstallation
? Installation
place requirement
Level floor :
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
Drain Hose
Washer
than
Laundry
appliance.
one
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Tub
approx.
2cm
Do not place or store
washer at any times.
They
can
damage
required.
laundry products
the finish
or
on
top of
controls.
650
850
600
? BS
Plug Safety
Details
(For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings
identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol (
) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
or
coloured Red.
nstallation
I
? Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the manufacturer or its service agents
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after use.
Connect the machine to an earthed socket in accordance with current wiring regulations.
The appliance must be positioned so that the plug is easily accessible.
2. If the
3.
4.
5.
?
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
?
Connecting
water
hose
supply
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kg.f/cm2)
Don't
strip or crossthread when connecting
Inlet hose
to
the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied
with the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Hot water
When your washer has
tap
?
Cold
Cold
Hot(option)
Make sure that there is no kink
hose and that it is not crushed.
water
tap
?
two
on
the
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
? Normal
Tap
without thread &
1. Unscrew the fixing
screw
to
screw
2. Push the
attach the tap.
rubber
with
type inlet hose
connector up till the
packing is
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
? Normal
Tap
without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
touch type inlet hose
one
2. Push the upper connector up till 3. Connect the water supply hose
the rubber packing is in tight
to the middle connector,
contact with the tap. Then
pushing the plate down.
tighten the 4 screws.
Middle
Rubber
connector
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Water
Middle
remove
Guide
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
nstallation
? Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
ca.
105
When
installing the drain hose sink,
it tightly with a string.
secure
cm
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
?
than 100
cm
placed
?
above the floor.
Proper securing the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too
100cm
min. 60cm
strap
min. 60cm
min.60cm max.10cm
cm
The drain hose should not be
higher
?
105
100cm
max.
When
installing the drain hose sink,
it tightly with a string.
secure
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
long, please
don't fill into the washer. This will
cause
abnormal noise.
9
I
?
nstallation
Level
adjustment
1.
Leveling
the
washing
machine
properly
prevents excessive noise and vibration.
Install the
appliance on a solid and level
preferably in a corner of
floor surface,
the room.
2. If the floor is uneven,
adjust the
adjustable feet as required. (do not
insert pieces of wood etc. under the feet)
Make
sure
that all four feet
are
stable
resting on the floor and then check
that the appliance is perfectly level. (use
a spirit level)
and
Adjustable feet
Higher
Lower
Adjustable feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
all. (Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the legs again.
10
C
?
are
Caring
before
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
Soil
3.
lightly soiled
one.
Color
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Separate
Separate
Lint
Wash lint
Caring
?
before
clothes
according
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all the pockets to make sure
they are empty. Things such
that
as
nails, hair clip, matches, pens,
coins and
keys
can
damage
both
your washer and your clothes.
?
Close zippers, hook and strings to
make sure that these items don't
snag
?
on
other clothes.
Pre treat dirt and stains
a
little
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A dding detergent
?
Adding detergent
1. The
Dispenser
and fabric softener
3.
Drawer
?
Detergent dosage
The
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
motor.
(Causing
a
detergent only for the front
washer.
?PreWash+MainWashU
Detergent usage may need to be adjusted
for water temperature, water hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding
(
?
Fabric Softener
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
?
Do not leave the fabric softener in the
2
days.
Softener will automatically be added
during last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
the clothes
at
unction
F
? Recommended
courses
Fabric
Program
according
Proper
Type
Temp.
to the
laundry type
Maximum
Water
Energy
Time
Load
in
Liter
in
kWh
in
Minutes
85
2.74
158
75
0.72
115
Option
First check if
laundry is machine
washable.
Cotton
95˚C
(white cotton, linen
towel and sheets...)
Color fast garments
40˚C
(shirts, night dresses,
pajamas...)and
(60˚C, Cold,
lightly soiled white
30˚C)
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Delicate
Wool
40˚C
(60˚C, Cold,
30˚C)
Delicate laundry
easily damaged
(silk, curtains...)
30˚C
(40˚C, Cold)
Machine washable
woolens with pure
new wool only
30˚C
(40˚C, Cold)
Pre Wash
Eco
Rinse+
Bio
Wrinkle Free
Rating
Pre Wash
Eco
Rinse+
Bio
Wrinkle Free
Less than
4.0 kg
58
0.6
88
Rinse+
Less than
3.0 kg
58
0.41
58
Rinse+
Less than
2.0 kg
53
0.28
58
Hand
Wash
"Hand Wash"
marked delicate and
wool laundry
Cold(30˚C,
40˚C)
Rinse+
Less than
2.0 kg
51
0.03
57
Quick
Colored Laundry
which is lightly
soiled fast
30˚C(40˚C,
Cold)
Rinse+
Less than
2.0 kg
50
0.35
30
30
laundry is heavily soiled, "Pre Wash" course is effective. Pre Wash is available in Cotton and
Synthetic Program.
: By selecting Eco function, the water temperature is reduced and washing time is lengthened. So you can
economize in your consumption of energy.
Pre Wash : If the
Eco
Rinse+ : If you wish to rinse more, the Rinse+ function will
Bio : If you want to elimenate
option button.
remove
any trace of detergents.
protein stains (milk, blood, chocolate...), you may select Bio function by pressing the
Quick 30 : By selecting this function, you may wash a small quantity of colored laundry which is lightly soiled fast.
You can select Bio function and Eco function when temperature is higher than 60˚C in Cotton and
the function is selected, the beginning water temperature can not be changed.
Synthetic.
If
Energy label data based on Cotton 60˚C program tested in accordance with EN60456.
13
H
ow
1. For
use
to
?
?
washer
in the initial
program
?
use
2. Manual
Press the Power button to start.
Press the Start/Pause button.
?
?
Initial condition
-
Wash
:
Only main
-
Rinse
:
3 times
wash
-
Water temperature
Program : Cotton
14
:
40˚C
Press the Power button to start.
Select the conditions which you want to
use, by pressing each button.
For
selecting the each conditions, please
refer to the page15~page20
?
-Spin:800rpm
-
Selecting
(Cotton)
Press the Start/Pause button.
H
ow
to
use
washer
(1) (2)
(3)
(1) Button : Time Delay
(2) Child Lock
(3) Button : Wrinkle Free
(4)
(5)
(6)
(4)
(5)
Button
:
Button
:
Button
:
Time
(6)
(7)
Spin
Temp.
Option
(8)
(7)
(8)
(9)
(9)
Button
:
Program
Button
:
Start/Pause
Button
:
Power
Delay
?
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
19:00 hours and the minimum time is 3:00
hours.
?
1. Time
Delay
?
Preparing washing before starting
Delay"
Turn on the water tap.
"Time
-
laundry and close the door.
Place the detergent and fabric softener
?
Load
the drawer.
?
-
-
Delay"
Press Power button.
Press the
Program
Time
Delay
present
in
or
?
How to set "Time
-
To cancel the time
on
delay, press the Power
button.
-
-
pressing of the button advances
delay by one hour.
Each
time
is 'estimated time' from the
to the
completion of washing cycle
selected process.
According to the
condition
of water supply and
temperature, the delayed time and the actual
washing time may
vary.
button to select
the program you require.
Press Time Delay button and set the
desired time.
-
Press the Start/Pause button.
(":" blinks.)
15
H
ow
to
use
washer
Child Lock
Wrinkle Free
?
If you want to prevent wrinkle, select this
button with spin.
Spin
If you want to lock all the buttons to prevent
a child or infirm persons, this
operation by
function
can
be used.
1. Child Lock
?
Child lock
can
Time
be set
Delay button
simultaneously.
by pressing and holding the
and Wrinkle Free button
[WD(M)-8090F(H)B]
?
?
When child lock is set, all buttons are
[WD(M)-1090(5)F(H)B] [WD(M)-1190(5)F(H)B]
inoperable.
To deactivate Child lock system, press and hold Time
Delay and Wrinkle Free button simultaneously again.
[WD(M)-1290(5)F(H)B] [WD(M)-1390(5)F(H)B]
?
?
If you want to
change the program when Child
lock is
By pressing the Spin button, the spin speed
can
be chosen.
active,
1. Press and hold both Time
Delay and Wrinkle Free
together.
2. Press the Start/Pause button.
3.
Change the desired program and press the
Start/Pause button.
1.
?
Spin speed
program
Change
the desired
-
16
is available
according
to the
follows.
Cotton /
Synthetic
800U Rinse HoldU No
program
The Child lock can be set at any time and it is
automatically canceled when operational errors
occur. Also Child lock works when power is off.
as
WD(M)-8090F(H)B
?
-
?
selection
Spin
SpinU
400U 600
Delicate / Wool / Hand Wash / Quick 30
400U 600U 800U Rinse HoldU No Spin
H
ow
to
use
washer
WD(M)-1090(5)F(H)B
?
-
Cotton
WD(M)-1390(5)F(H)B
?
/Synthetic
-
800U 1000U Rinse HoldU No
400U 600
-
No
Delicate
-
400U 600U 800U Rinse HoldU No
-
-
400U 600U 800U 1000U Rinse HoldU
Spin
-
-
Cotton
-
/Synthetic
800U 1100U Rinse HoldU No
400
Spin
Spin
Quick 30
Spin
Spin
2. No
Wool / Hand Wash / Quick 30
No
?
Spin
If No
after
WD(M)-1290(5)F(H)B
-
SpinU
Wool / Hand Wash
No
400U 600U 800U 1100U Rinse HoldU
?
Delicate
400U 800U Rinse HoldU No
Delicate
400U 600U 800U Rinse HoldU No
-
Synthetic
400U 800U 1100U 1300U Rinse HoldU
SpinU
400U 600
-
400U 600
400U 800U 1100U Rinse HoldU No
WD(M)-1190(5)F(H)B
?
SpinU
800U 1100U Rinse HoldU No
Spin
Wool / Hand Wash / Quick 30
No
Cotton
800U 1100U 1300U Rinse HoldU
SpinU
spin
spin is selected,
draining water.
If lamp
the washer stops
turns on, that function has been
selected.
Cotton
800U 1000U 1200U Rinse HoldU
No
-
SpinU
400
3. Rinse Hold
Synthetic
800U 1000U Rinse HoldU No
-
400U 800U Rinse HoldU No
-
SpinU
?
Spin
If you desire to leave fabrics in the machine
without spinning after rinse to prevent them
from
hold
Wool / Hand Wash
400U 800U 1000U Rinse HoldU No
-
400
Delicate
Spin
?
Quick 30
getting wrinkled, you may select rinse
by pressing the spin button.
If you want to drain and spin, when Rinse
Hold function is proceed, press the
400U 800U 1000U 1200U Rinse HoldU
Start/Pause button to cancel the Rinse Hold
No
function and select spin speed or program.
Press the Start/Pause button again to start
Spin
program.
?
If you want to drain
If lamp
only, select the No spin.
turns on, that function has been selected.
17
ow
H
to
use
Water
washer
Option
Temp.
?
By pressing the Temp
?
can
selected.
-
By pressing the Option
button, the Option function
button, the water
temperature can be
Cold
-30˚C/40˚C/60˚C/95˚C
be selected.
-
Bio
-
Rinse+
-
Eco
-
Pre Wash
1. Bio
?
1. Water
?
-
Temperature
Water temperature can be selected
below according to the program.
as
Cotton
If you want to elimenate
protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing the option button.
[You can select Bio function when temperature is
higher than 60 C in Cotton and Synthetic.]
40˚CU 60˚CU 95˚CU ColdU 30˚C
-
40˚C
-
2. Rinse+
Synthetic
U
60˚C
U
Cold
U
30˚C
?
Delicate & Wool & Quick 30
30˚C U 40˚C U Cold
?
-
Hand Wash
Cold
U
Selected
For the
30˚C
U
more
to the page13.
detailed
By selecting Rinse+ function, the Rinse
Time and the Rinse water
40˚C
temperature's lamp
If you wish to rinse more, Rinse+ function
will remove any trace of detergents.
turns
on.
are
increased.
3. Eco
information, please refer
?
By selecting Eco function, the water
temperature is reduced and washing time is
lengthened. So you can economize in your
consumption of energy.
[You can select Eco function when
temperature is higher than 60 C in Cotton
and Synthetic.]
4. Pre Wash
?
If the
laundry is heavily soiled, "Pre Wash"
course
?
is effective.
Pre Wash is available in Cotton and
Synthetic.
If lamp
turns on, that function has been
selected.
18
H
ow
to
use
washer
Start/Pause
Program
?
7 programs
are
available
according to
the laundry
type.
1. Start
?
This Start/Pause button is used to start
wash
1.
?
Program
When Start/Pause button is
pressed, Cotton
program is automatically selected.
-
By press the Program button, the program is
selected in orders of "Cotton U SyntheticU
Delicate
U
Quick 30
Wool
U
Hand Wash
U
cycle
or
pause the
2. Pause
?
?
If temporary stop of wash cycle is needed,
push "Start/Pause" button.
After the pause button is pressed, the power
is turned off automatically 4 minutes later.
Rinse+Spin".
U
Power
to the
Regarding
Please refer to
cycles.
laundry type for each program
the page13.
2. Course
-
-
-
-
Cotton
Synthetic
Delicate
-
-
-
Hand Wash
Quick 30
Rinse+Spin
1. Power
?
Press the Power button to turn power
on
and off
Wool
?
To cancel the Time
can
2. Initial
?
Delay function,
it
also be used.
Program
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
washer is
ready
So, if you
want to advance into the
washing cycle without selecting the
program, just press Start/Pause button
and then the washer will proceed.
Initial program
-
Cotton
Program / Main
wash /
Normal Rinse/800 rpm / 40˚C
19
ow
H
to
washer
use
3.
Display
?
Completion
?
Special
display
When child lock is selected, the
is displayed.
"
?
function
"
washing cycle is completed,
is displayed on the "Multi
display".
?
delay is selected, it shows
remaining times to finish the selected
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
-
-
diagnose display
-
?
If the washer has
a
trouble, the trouble
-
type is displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
-
:
Sensing
:
Problem of
:
Door is not closed
:
Over load in moter.
:
Over load in moter.
:
Water inlet trouble
:
Drainage
:
Imbalance trouble
:
Water temperature trouble
water pressure
overfilling
error
-
water
-
-
?
trouble
to the
letters
displayed, please refer
troubleshooting page24 and follow the
guide.
20
error
are
Cotton 95˚C : around 2 hours and 38 minutes
Cotton 40˚C : around 1 hour and 55 minutes
Synthetic : around
1 hour and 28 minutes
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 19 minutes
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
?
If this
by
manufacturer.
program.
2. Self
"
4. Time left
When time
the
washing
When
"
1.
of
If the imbalance is detected
or
if the
suds
removing program works, the
wash time shall be longer.
(Max. increasing time is 45minutes.)
M
aintenance
Before
cleaning
the washer interior,
the electrical power cord to avoid electrical
unplug
shock to avoid electrical shock hazards.
?
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
?
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain it
using
1.
Open the lower cover
cap( )byusing
2.
left in the
smooth
laundry.
running of your machine.
the drain hose and then open the pump filter to
whatever may have
Be careful when
objects
ensure
stopped
draining
it up.
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Take out any
At
foreign material
( ). After
cleaning, turn the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to prevent
to the floor. If the
on
( )
open to the left.
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
aintenance
M
?
Dispenser drawer
After
?
?
a
while
detergents
If necessary it
To facilitate
?
can
?
?
in the drawer.
can
The
the upper part of the fabric softener compartment
also accumulate inside the
occasionally
washing
with
an
recess
which should
replace
the drawer and
run a
drum
continuously
clogs appliances,
builds up in
and if it is not
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
washing
If you
use
be removed.
old toothbrush.
metal articles
the
can
recess
If you live in a hard water area, limescale
seen and it is not easily removed.
Although
the catch
it out.
Over time the build up of scale
have to be replaced.
?
deposit
a jet of running water.
completely from the machine by pressing
Once you have finished cleaning,
rinse cycle without laundry.
?
?
by pulling
The drawer
Detergent
be removed
cleaning,
be cleaned
?
a
It should be cleaned from time to time with
downward and
?
and fabric softeners leave
descaling agents, dyes
or
bleaches, make
sure
they
places where
kept
it cannot be
in check these will
of rust
can
be caused
Remove the spots with
Never
22
use
steel wool.
a
stainless steel
can
are
attack part of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler could contain components that
eventually
washing
machine.
machine
aintenance
M
?
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
Immediately wipe off any spills. Wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirit, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass. These
always be clean to ensure a water tight seal.
Run washer
through a complete cycle using hot
Repeat process if necessary.
NOTE
?
Remove hard water
Winterizing
winterizing
1. Turn off water
3.
an area
where
freezing
instructions to prevent
labeled
as
washer safe.
can occur or
damage
moved in
freezing temperatures,
to the washer:
supply tap.
electrical cord into
Plug
water.
deposits using only cleaners
2. Disconnect hoses from water
4. Add
should
instructions
If the washer is stored in
follow these
areas
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
nontoxic recreational
vehicle(RV) antifreeze
to
empty wash drum. Close
door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
expelled.
dry drum interior, and close door.
7. Remove
dispenser drawer. Drain any
Replace drawer.
8. Store washer in
9. To
remove
through
a
an
to drain out all water.
water in
compartments and dry compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
T roubleshooting guide
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you call the Service Department.
This
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
Stop
and
If not removed
resting firmly
during
installation. See Installation for
been removed?
Are all the feet
the
out of balance.
probably
redistribute wash load.
Have all the transit bolts and
packing
If sound continues, washer is
on
removing
transit bolts.
Wash load
ground?
in drum.
unevenly distributed
Stop washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose is loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent?
can cause
Water does not enter
washer
or
?
supply
is not
adequate
in
or
unsuitable
The formation of foam
water leaks.
Check another tap in the house.
area.
it enters
slowly
Water
detergent
?
?
?
Water
supply tap
completely open.
Water inlet hose
is not
are
Fully
kinked.
The filter of the inlet hose
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
?
drains
24
slowly.
Drain hose is kinked
or
clogged.
Clean and
straighten
or
The drain filter is
clogged.
Clean the drain filter.
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T roubleshooting guide
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
Solution
supply is not adequate in area
supply taps are not completely
Water
Water
open.
Water inlet hose
are
Fully open tap.
Straighten
kinked.
The filter of the inlet hose
Check another tap in the house.
clogged.
hose.
Check the filter of the inlet hose.
Drain hose is kinked
Clean and
The drain filter is
Clean the drain filter.
or clogged.
clogged.
straighten the
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance
detection and correction system. If
individual heavy articles are
or
drain hose.
2 similar items to
help
load to allow proper
bath mat, both robe,
system may stop spinning or
loaded(as like)
etc. this
interrupt the spin cycle
altogether, if the imbalance is too
great even after several spin starts.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
even
?
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
If the water overfills due to the
water
"
?"
"
?
26
display.
"is
sensor
?
faulty
valve, you will get
displayed
if the water level
malfunction.
Over load in motor.
Over load in motor.
Close the water tap.
Unplug the power
Call for service.
plug.
and call for
M
emo
27
For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3007S
:
-
5:30PM
www.lgelectronics.co.uk
Download PDF