LG | WM-10260T | LG WM-10260T Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3031C
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-1026(0~9)S
WD(M)-1026(0~9)N
WD(M)-8026(0~9)S
WD(M)-8026(0~9)N
WD(M)-1026(0~9)T
WD(M)-8026(0~9)T
LWD-80260N
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Protection
against
creases
With the alternate rotation of the
drum, creasing in the laundry
is minimized.
More economical
FUZZY
by Fuzzy Logic System
Logic System
detects the amount of load and water
temperature, and then determines the optimum
and
washing time
consumption.
water level
to minimize energy and water
Child-Lock
The Child-Lock system has been developed to prevent
children from pressing any button (except Power button) to
change
the programme
Low noise
during operation.
speed control system
By sensing the
distributes load
amount of load and
evenly
balance, automatical
to minimize the
spinning
noise level.
Auto Restart
washing machine is turned off by a power failure,
it restarts automatically where it stopped when power is
supplied again. and it will be the same the machine is
unplugged and is plugged in again.
Although
C
the
ontents
Warnings .........................................................................................3
Specification ....................................................................................4
Installation .......................................................................................5
Care before
washing .....................................................................11
Adding detergent ...........................................................................12
Function ........................................................................................13
How to
use
washer........................................................................14
Maintenance..................................................................................21
Troubleshooting guide...................................................................24
Terms of
2
Warranty
........................................................................27
W
arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
?
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
?
published user-repair
or
?
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
instructions.
the
Keep
appliances
underneath and around your
free of combustible materials such
?
area
etc.
on,
with,
Do not slam the washer door closed
?
inside
hang
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
try to
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
on
crawl inside the washer.
or
To minimize the
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
Close supervision is necessary if this appliance
is used by or near children.
the door
?
instructions
Do not wash
out.
play
this or any other appliance.
?
using
garment manufacturer's wash and
Do not allow children to
?
to persons when
that you understand and have the skills to carry
lint, paper, rags, chemicals,
?
injury
precautions, including the following:
exposed to the weather.
instructions
or
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
-
proper outlet installed
by
a
qualified electrician.
3
pecification
S
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
its service agents
qualified person in
or
Drawer
or a
(For detergent and
fabric softener)
order to avoid
similarly
a
hazard.
Control panel
Drum
Door
Lower
Lower
Drain
WD(M)-1026(0~9)S/
WD(M)-8026(0~9)S
Name
Power
WD(M)-1026(0~9)N/
WD(M)-8026(0~9)N/
LWD-80260N
supply
loading washing
WD(M)-1026(0~9)T/
WD(M)-8026(0~9)T
machine
220-240V~ 50Hz
,
600mm(W) 360mm(D) 850mm(H) 600mm(W) 440mm(D) 850mm(H) 600mm(W) 550mm(D) 850mm(H)
Capacity
Weight / Max.
Drain pump filter
plug
Front
Size
Refer to the
Watt
52kg
Water
/ 2100W
Permissible water
Rating
Label
/ 2100W
64kg
55
0.3
Pressure
Spin Speed
57kg
42
consumption
-
/ 2100W
69
10kgf/cm2 (30~1000kPa)
Rinse Hold/No
Rinse
The appearance and
Spin/400/600/800 [WD(M)-8026(0~9)S/8026(0~9)N/8026(0~9)T/LWD-80260N]
Hold/No Spin/400/800/1000 [WD(M)-1026(0~9)S/1026(0~9)N/1026(0~9)T]
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
cap
cover
Adjustable feet
Wash
cover
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
is installed
on a
which may be subject to infestation by cockroaches or other
attention to keeping the appliance and its surroundings in clean condition at
are areas
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance is fitted
Packing
prevent internal damage during transport.
and all transit bolts must be
removed before
When
with transit bolts to
using
the washer.
the base, be
the additional packing
unpacking
remove
support in
packing.
sure
to
Washer
the middle of the base
Packing Support
Base
Removing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed,
it may
2. Unscrew the 4 bolts with
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
the spanner
Packing
heavy
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
Washer
appliance.
Laundry
Tub
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:right & left side)
Do not place or store laundry products on top of washer at
any times.
They can damage the finish or controls.
approx.
2cm
Positioning
Install the washer
Make
?
?
?
?
flat hard floor.
that air circulation around the washer is not
Never try to correct any
under the washer.
in the floor with
unevenness
impeded by carpets,rug etc.
pieces of wood, cardboard or similar materials
If it is
impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
?
sure
on a
breakdown.
With the washer installed
adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and
the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
6
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
water
supply after
so
that the
plug
is
easily
its service
agents
or
similarly
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may
burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing
point.
If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
the Power Cord
concerning
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water
supply pressure must be between 30kPa
and 1000kPa (0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting
Inlet hose
to
the valve.
▶If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied
with the water
inlet hoses.
are
used for
preventing
They
water leaks.
?
?
Hose connector
?
Rubber seal
Make
sure
the connection to taps is
tight
enough.
Periodically check the condition of the hose
and replace the hose if necessary.
Make
sure
that there is
no
kink
on
the hose
and that it is not crushed.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
till
water
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
mobile installations such
use
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
of suffocation !
all
Keep
packaging
a
risk
well away from children
Installation of drain hose
about 100
about 145
cm
cm
?
max.10cm min.60cm
about 105
cm
?
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
Laundry tub
about 100
cm
Hose
about 145
Retainer
cm
Tie
max.
about 105
?
?
?
cm
The drain hose should not be
m
a
x
.
1
0
c
m
min.60cm
100cm
100cm
min. 60cm
max.
strap
min. 60cm
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
NOTE
a
appliance
washer is level, tighten
may contribute to
feet
as
required. (do
In the
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
not
stable and
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine is
to
(Cut Tread
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
least 2 floor beams with
of the
room,
Rubber
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
?
?
?
?
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
mm
C
before
are
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
one.
Soil
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
according
to amount of soil.
white fabrics from colored fabrics.
producers and
separately.
lint collectors
loading
large
Do not wash
clothes
Wash lint
and small items in a load. Load
than half the total wash load.
Combine
more
Separate
Separate
single
items. This may
cause an
large items first. Large items
out-of-balance load. Add
?
Check all
that
should not be
one or
pockets
two similar items.
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pretreat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
The
detergent should be used according to
instruction of the detergent manufacture.
?
?
dosage
If too
much
can occur
detergent is used,
?
and this will decrease the
?
Main wash
only
Use powder
U
loading
?PreWash+MainWashU
2.
or cause
If suds occur too much, pleas
detergent amount.
?
washing
motor.
reduce the
detergent only for the front
washer.
Detergent usage
?
many suds
too
heavy load to the
(Causing malfunctions)
result
the
may need to be
adjusted
for water temperature, water hardness,
size and soil level of the load. For best
Adding Fabric Softener
results, avoid oversudsing.
(
)
MAX
MAX
125 ml
125ml
4. Water softener
?
?
used to cut down
Overfilling
in
can cause
early dispensing
?
2
days.
?
Use
a
quantity of detergent
as
for soft
water.
Softener will
automatically be added
during the last rinse cycle.
Tips
Full load
Do not open the drawer when water is
Solvents(benzene, etc)
Part load
are
according
:
to
manufacturer's recommendation.
supplied.
?
the
the water softener.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
on
Calgon can be
use of detergent
as
extremely hard water areas. Dispense
according to the amount specified on the
packaging. First add detergent and then
clothes.
?
softener, such
Do not exceed the maximum fill line.
of the fabric softener which could stain
?
A water
not
:
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
allowable.
?
NOTE
12
Do not pour fabric softener
directly on the clothes
Detergent is flushed from the dispenser
the beginning of the cycle.
at
F
unction
Recommended
courses
according
Fabric
to the
laundry type
Proper
Program
Maximum Load
Option
Type
First check if
Temp.
laundry
is machine
Pre Wash
95˚C
washable.
Cotton
Intensive
LWD-80260N
WD(M)-1026(0~9)S
WD(M)-1026(0~9)T
WD(M)-8026(0~9)S WD(M)-1026(0~9)N WD(M)-8026(0~9)T
WD(M)-8026(0~9)N
Rinse+
(white cotton, linen
towel and sheets...)
Crease Care
Color fast gaments
Pre Wash
(shirts, night dresses,
pajamas...)and lightly
soiled white
60˚C
Intensive
(Cold, 30˚C,
Rinse+
40˚C)
Crease Care
Rating
Rating
Rating
Rating
Rating
Rating
Less than
Less than
Less than
cotton(underwear...)
Synthetic Polyamide, Acrylic,
Polyester
Delicate
40˚C
(60˚C, Cold,
30˚C)
Delicate
laundry
easily damaged
(silk, curtains...)
Wool
30˚C
(40˚C, Cold)
Machine washable
woolens with pure
wool
new
only
Hand
"Hand Wash" marked
Wash
delicate and wool
Colored
Quick 30
which is
Laundry
lightly soiled
fast.
Pre Wash
:
Intensive
:
If the
Program setting
laundry
is
1.5
Less than
Rinse+
1.0
Intensive
Rinse+
with "Intensive"
kg
1.5
1.5
Less than
Rinse+
1.0
1.5
kg
2.0
kg
Less than
2.0
kg
Less than
kg
Less than
kg
Less than
kg
2.0
kg
Less than
kg
Less than
kg
Less than
kg
2.0
kg
Wash" Cotton is recommended. Pre Wash is available in
soided "Intensive"
option for test
1.5
Less than
1.0
Less than
kg
Less than
1.0
additional rinse, which may assist in
heavily
3.0
kg
Intensive
(40˚C, Cold)
30˚C(40˚C,
Cold)
2.0
kg
Crease Care
Rinse+
laundry is heavily soiled, "Pre
Cotton and Synthetic Program.
an
Rinse+
Intensive
If the
Rinse+: Used to introduce
Intensive
30˚C
Cold(30˚C,
40˚C)
laundry
Pre Wash
removing
traces of
detergent
residue.
option is effective.
in accordance
or
in
conformity with
EN60456 and IEC 60456.
13
H
ow
1. Cotton
to
washer
use
selected upon power
?
?
?
Press the
Press the
2. Manual
automatically
Power(
)
on.
button to start.
Start/Pause(
)
button.
?
?
Initial condition
-
Wash
:
main wash
-
Rinse
:
3 times
800 rpm
[WD(M)-8026(0~9)S/8026(0~9)N/8026(0~9)T/
LWD-80260N]
1000 rpm
[WD(M)-1026(0~9)S/1026(0~9)N/1026(0~9)T]
-
Program : Cotton
14
Power(
) button
to start.
Select the conditions which you want to
use, by pressing each button.
selecting the each conditions, please
refer to the page15~page20
-Spin:
Water temperature
Press the
For
?
-
Selecting
:
60˚C
Press the
Start/Pause(
) button.
H
(1)
(2)
(3)
ow
to
use
washer
Button
:
Power
Button
:
Program
Button
:
Start/Pause
(4)
(5)
(6)
Button
:
Button
:
Button
:
(7) Child Lock
(8) Button : Temp.
(9) Button : Spin
Time
Delay
Option
Option
Option
2. Intensive
?
?
If the
laundry is heavily soiled "Intenive"
option is effective.
By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
?
?
By pressing the Option button, all
Option functions may be selected.
-
Pre Wash
-
Intensive
-
Rinse+
-
?
?
?
laundry is heavily soiled, "Pre Wash"
before the wash program is started.
option is
not available with Quick 30
Used to additional rinse, which may assist in
removing traces of detergent residue.
By selecting Rinse+ function, the rinse time
and the rinse water
are
increased.
is effective.
Pre Wash is available in Cotton and
Synthetic.
The
option press the Option button
3. Rinse+
1. Pre Wash
course
This
this
program.
Crease Care
If the
use
once
?
?
To
required lamp
identification.
4. Crease Care
?
will
light up for
If you want to prevent crease, select this
button with spin speed.
15
ow
H
to
use
washer
Spin
2. No spin
6
?
If
spin is selected, the washer stops after
draining water.
no
The
required lamp
identification.
will
light up for
3. Rinse Hold
[WD(M)-8026(0~9)S/
WD(M)-8026(0~9)N/
WD(M)-8026(0~9)T/
LWD-80260N]
?
[WD(M)-1026(0~9)S/
WD(M)-1026(0~9)N/
WD(M)-1026(0~9)T]
?
be chosen.
?
Spin speed
program
?
is available
according
to the
follows.
[WD(M)-8026(0~9)S/8026(0~9)N/8026(0~9)T/
LWD-80260N]
-
?
as
Cotton/Synthetic/Wool/Hand Wash/
Delicate/Quick 30/Rinse+Spin
Rinse Hold-No Spin-400-600-800
[WD(M)-1026(0~9)S/1026(0~9)N/1026(0~9)T]
-
-
Cotton/Synthetic/Wool/Hand Wash/
Quick 30/Rinse+Spin
Rinse Hold-No Spin-400-800-1000
Delicate
Rinse Hold-No
16
To
proceed through
The
will
?
1. Spin selection
Spin-400-800
by pressing the spin button
repeatedly this function leaves clothes
machine; suspended in the water after
rinse without entering into spin.
By pressing the Spin button, the spin speed
can
Is selected
to a drain or
in the
a
spin, once
the rinse hold function is completed using to
Program button and Spin button to the
required program.
(Spin or Pump)
required lamp
identification.
light up for
ow
H
to
use
Water
?
washer
Child Lock
Temp.
By pressing the Temp.
button, the water
temperature can be
If you choose to lock the buttons on the
control assembly to prevent tampering this
selected.
-
Cold
-30˚C/40˚C/60˚C/95˚C
function may be selected.
1. Child Lock
?
-
can
be set
holding both option
simultaneously.
1. Water Temperature
?
Child Lock
Water temperature can be selected
below according to the program.
by pressing
and
buttons
as
Cotton
Cold--30˚C--40˚C--60˚C--95˚C
-
Synthetic
Cold
--
?
30˚C
--
40˚C
--
60˚C
?
-
Delicate & Wool & Quick 30 &
Hand Wash
Cold
--
30˚C
--
required temperature lamp
identification.
more
to the page13.
are
inoperable
To deactivate Child Lock system, press both
option buttons simultaneously again.
40˚C
The
For the
When child lock is set, all buttons
except power button.
detailed
will
light up for
information, please refer
?
To
change
to the desired program, whilst
in child lock mode.
1. Press both
option
buttons
together
once
again.
2. Press the Start/Pause button.
3. Select the desired program and press
the Start/Pause button
again.
Change
the desired
program
?
The child lock
is
automatically
errors occur.
power is off.
be set at any time and it
canceled when operational
can
Also Child Lock works when
17
to
ow
H
use
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
Delay"
Turn on the water tap.
"Time
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
?
in
the drawer.
?
-
-
-
available
according
to the
Lamp
will
light
up to indicate selected
program.
Delay"
Press Power button.
Press the
Program
1. Program
button to select
the program you require.
Press Time Delay button and set the
?
desired time.
-
are
laundry type.
?
How to set "Time
8 programs
-
Press the Start/Pause button.
When Start/Pause button is
pressed, the
Cotton program is automatically selected.
By pressing the Program button, the
program is selected in order of "Cotton
Synthetic Delicate Wool Hand Wash
--
(":" blinks.)
--
Quick 30
?
If Time
pressed, "3:00" is
displayed. The maximum delayed time is
Delay
button is
19:00 hours and the minimum time is 3:00
--
--
Rinse+Spin
--
--
--
Drain".
Regarding to the laundry type for each program
Please refer to the page13.
hours.
?
time
?
pressing of the button
delay by one hour.
Each
To cancel the time
advances
2. Course
on
delay, press the Power
button.
?
?
Time
'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
Delay
According to
is
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
-Cotton
-Wool
-Rinse+Spin
-Synthetic
-Hand Wash
-Drain
-Delicate
-Quick 30
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
This
Start/Pause( ) button is used
wash cycle or pause the wash cycle.
to start
2. Pause
?
?
?
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
at the end of the wash
Press the Power button to turn power
and off
on
2. Initial Program
If temporary stop of wash cycle is needed,
press the Start/Pause( ) button.
or
?
cycle.
?
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause( )
button and then the washer will proceed.
Initial program
[WD(M)-8026(0~9)S/8026(0~9)N/8026(0~9)T/
LWD-80260N]
-Cotton
Program/Main Wash/
Normal Rinse/800 rpm/60˚C
[WD(M)-1026(0~9)S/1026(0~9)N/1026(0~9)T]
-Cotton
Program/Main Wash/
Normal Rinse/1000 rpm/60˚C
19
ow
H
to
use
washer
Display
4. Time left
?
?
1. Special function
?
When child lock is selected, the
is displayed.
"
?
display
"
If the machine encounters
operation;
displayed
2. Self
a
fault
During washing cycle, the remaining
washing time is displayed.
Recommended program
manufacturer.
(
): WD(M)-1026(0~9)T/8026(0~9)T
<
>:
-
during
operation, the
displayed.
during
"
associated fault will be
-
"
"
"
"
Water pressure sensing error
Problem of overfilling water
:
:
-
-
Door is not closed
:
-
"
"
:
Water inlet trouble
-
"
"
Drainage
:
"
"
"
:
Unbalanced load
:
Water temperature trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
3. Completion of
?
When
washing
washing cycle is completed,
is displayed on the "Multi
display".
"
"
20
Cotton 60˚C
:
Synthetic
:
Delicate
Wool
:
around 50 minutes
around 50 minutes
:
Hand Wash
Quick 30
:
around 45 minutes
:
around 30 minutes
Rinse+
Spin
Drain
around 1 minute
:
:
around 17 minutes
trouble
?
"
minutes)
around 1 hour and 5 minutes
-
"
2 hours and 5
around 1 hour and 40 minutes
diagnosis display
fault
:
<around 1 hour and 55 minutes>
-
a
Cotton 95˚C
(around
the associated fault will be
If the machine encounters
WD(M)-1026(0~9)S/8026(0~9)S
around 2 hours
-
?
by
The
washing time may vary by the
amount of laundry, water pressure,
water
temperature and other
washing
?
If
an
conditions.
unbalanced load is detected
if the suds
or
removing
program
operates, the wash time may be
extended.
(Max. increasing
time is
45minutes.)
M
aintenance
Before
cleaning
the washer interior,
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
cable, and destroy the plug Disable the
inside.
being trapped
The water inlet filter
-"
"error message will blink
detergent
-
on
the control
when water does not enter the
panel
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
1.
regularly that the
CAUTION
filter is clean to
objects
ensure
left in the
smooth
laundry.
running of your machine.
using the drain and then open the pump filter to remove whatever
any threads or objects.
Be careful when draining if the water is hot.
Allow the water to cool down before cleaning the drain pump, carrying out emergency
emptying or opening the door in an emergency.
First drain
Open the lower cover
cap ( ) by using a
2.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
this time
plug ( )
water
to
pull
out
the hose.
use a
flowing
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
3
1
2
3
2
21
aintenance
M
Dispenser drawer
After
?
?
?
a
while
It should be cleaned from time to time with
To facilitate
Detergent
cleaning,
can
be cleaned
also accumulate inside the
with
occasionally
?
an
washing
recess
water.
replace
the drawer and
If you
use
can
be removed.
run a
drum
continuously
clogs appliances,
build up in
and if it is not
the
washing
the catch
which should
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
by pressing
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
jet of running
in the drawer.
recess
Over time the build up of scale
be replaced.
?
deposit
the upper part of the fabric softener compartment
Once you have finished cleaning,
rinse cycle without laundry.
The
?
a
a
If necessary it can be removed completely from the machine
downwards and by pulling it out.
The drawer
?
and fabric softeners leave
detergents
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
kinked.
The filter of the inlet
hose(s) clogged.
Drain hose is kinked
or
The drain filter is
clogged.
clogged.
Check another tap in the house.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
Clean and
straighten the
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
unbalance
or
2 similar items to
load to allow proper
bath mat, both robe,
?
Is the door
opened?
Close the door.
If"
"is not released, call for service.
Unplug the
power
plug
service.
Water overfills due to the
faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
26
help
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
(ex.
?
drain hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Solution
Water level
sensor
has malfunction.
and call for
of Warranty
T
erms
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
product
it
means
the
product
is
symbol is attached to
covered by the European
a
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and
3. The correct
human health.
4. For more detailed information about
disposal
of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
?
?
or
by pests
product
for
or
change
example,
the set-up of the
product.
rats or cockroaches etc..
example
water drain
sound, spin
warming beeps.
Correcting
the installation for
example, levelling
Normal maintenance which recommended
by
the
Replace
the owner's manual.
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
Incidental
If this
consequential damage
appliance.
:
or
correct house
the pump and
plumbing.
repairs.
or
product
(Example
wiring
of drain.
product, adjustment
Removal of
with this
?
of
vibration that is considered normal for
inlet hose
?
on use
to
personal property
caused
by possible
defects
is used for commercial purpose, it is not warranted.
Public
places such
center, dormitory)
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF

advertising