LG | WM-15220FD | LG WM-11220FD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3029U
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-11220(5)FD
WD(M)-13220(5)FD
WD(M)-15220(5)FD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
washing
wash about 40%
machines. A
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
Direct Drive
water level and
consumption.
System
The advanced Brushless DC motor rotates the Drum
without belt and
directly
pulley.
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
The power button will
activated.
Low noise
always
remain
operative
whilst Child-Lock is
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the
washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
Water Circulation
Spray detergent
over.
Clothes
wash
cycle.
solution and water onto the load
are
more
quickly
and
and
thoroughly during
removed more easily
detergent suds can be
by the water shower during rinse cycle. The water circulation
system uses both water and detergent more efficiently.
C
The
soaked
over
ontents
Warnings ...............................................................................................3
Specification..........................................................................................4
Installation .............................................................................................5
Care before
washing ...........................................................................11
Adding detergent.................................................................................12
Function ..............................................................................................13
How to
use
washer .............................................................................14
Maintenance .......................................................................................21
Troubleshooting guide
Terms of
2
Warranty
........................................................................24
..............................................................................27
W
arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
?
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
?
published user-repair
or
?
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
instructions.
the
Keep
appliances
underneath and around your
free of combustible materials such
?
area
etc.
on,
with,
Do not slam the washer door closed
?
inside
hang
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
try to
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
on
crawl inside the washer.
or
To minimize the
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
Close supervision is necessary if this appliance
is used by or near children.
the door
?
instructions
Do not wash
out.
play
this or any other appliance.
?
using
garment manufacturer's wash and
Do not allow children to
?
to persons when
that you understand and have the skills to carry
lint, paper, rags, chemicals,
?
injury
precautions, including the following:
exposed to the weather.
instructions
or
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
-
proper outlet installed
by
a
qualified electrician.
3
S
pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
similarly
its service agents
qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
or
a
hazard.
panel
Drum
Door
Lower
cover
Adjustable
Drain pump filter
Drain
Lower
feet
cover
plug
Name
Power
supply
Size
Weight
/ Max.Watt
:
Front
:
220-240V~,50Hz
:
600mm(W)×600mm(D)×850mm(H)
:
65kg
loading washing
machine
/ 2100W
Wash
capacity
:7.5kg
Water
consumption
:
50ℓ(
Permissible water pressure
:
0.3-10kgf/㎠ (30-1000kPa)
Spin speed
:
Rinse Hold/No
6.7ℓ/
kg )
Rinse Hold/No
Rinse Hold/No
The appearance and
specifications may
Spin/400/800/1200/1500[WD(M)-15220(5)FD]
Spin/400/800/1000/1300[WD(M)-13220(5)FD]
Spin/400/800/1000/1100 [WD(M)-11220(5)FD]
be varied without notice to raise the units
Accessories
Spanner
4
cap
quality.
nstallation
I
Install or store where it will not be
weather.
exposed
to
temperatures below freezing
or
exposed
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin, pay particular
to the
is installed
on a
which may be subject to infestation by cockroaches or other
attention to keeping the appliance and its surroundings in clean condition at
are areas
all times.
Any damage which may
appliance guarantee.
be
cause
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
?
appliance is fitted
Packing
with transit bolts to
prevent internal damage during transport.
and all transit bolts must be
removed before
using
the washer.
Washer
When
sure
unpacking the base, be
to remove the additional
packing support in
the base packing.
Removing
Packing Support
the middle of
Base
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed,
it may
2. Unscrew the 4 bolts with
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
the spanner
(Packing support may not
be used depending on
models.)
Packing
heavy
?
Whenever the
appliance is transported, the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with more than one
Laundry
appliance.
Tub
approx.
2cm
Additional Clearance :
For wall, door and floor modeling is
(10cm : rear /2cm:right & left side)
Do not
place
or
store
required.
laundry products
on
top of washer
at any times.
They
the finish
damage
can
or
controls.
Positioning
Install the washer
Make
sure
?
Never
?
If it is
on a
flat hard floor.
that air circulation around the washer is not
try to correct any
impossible to avoid positioning
covered with aluminum foil
on
The washer must not be installed in
?
Please
?
With the washer installed
a
ensure
pieces of wood,
the washer next to
the side
?
and
in the floor with
unevenness
impeded by carpets,rug
facing
rooms
that when the washer is
the cooker
where the
a
cardboard
gas cooker
or
or
can
or
similar materials under the washer.
coal
stove,must be
temperature
etc.
burning stove,an insulating(85x60cm)
inserted between the two appliance.
drop
below 0°C.
installed, it is easily accessible for the engineer in the event of a breakdown.
adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
must be earthed
appliance
Yellow(Earth)
E
Brown(Live)
Blue(Neutral)
L
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If
a
13 amp
6
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
that the
so
plug
is
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
easily accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water supply pressure
must
be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
?
Hose connector
Rubber seal
?
in order to
are
supplied
with the water inlet hoses these
water leaks.
prevent
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the hose
if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
Hot water tap
Cold
Cold
Hot(option)
water
tap
▶When your washer has two valves.
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
?
?
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
till
water
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
about 100
about 145
cm
cm
?
max.10cm min.60cm
about 105
cm
?
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
Laundry tub
about 100
cm
Hose
about 145
Retainer
cm
Tie
100cm
min. 60cm
max.
about 105
?
?
?
cm
The drain hose should not be
m
a
x
.
1
0
c
m
min.60cm
100cm
min. 60cm
max.
strap
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
NOTE
a
appliance
washer is level, tighten
may contribute to
feet
as
required. (do
In the
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
not
stable and
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine
(Cut Tread
is to be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
?
?
at
If
?
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
least 2 floor beams with
of the
room,
Rubber
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
?
?
?
?
?
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
dosage
The
detergent should be used according to
instruction of the detergent manufacture.
the
max
?
If too
much
can occur
result
?
?
Main wash
only
U
heavy load to the
malfunction)
or cause
Use powder
loading
too
many suds
and this will decrease the
(Causing a
?
detergent is used,
washing
motor.
detergent only for the front
washer.
Detergent usage
may need to be
adjusted
for water temperature, water hardness,
size and soil level of the load. For best
?PreWash+MainWashU
results, avoid oversudsing.
2.
Adding Fabric Softener
Tips
(
)
MAX
MAX
125 ml
125ml
Full load
according
:
manufacturer's recommendation.
Part load
:
3/4 of the normal amount.
Minimum load
?
can cause
early dispensing
of the fabric softener which could stain
clothes.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
Softener will
automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
:
1/2 of full load.
Do not exceed the maximum fill line.
Overfilling
?
to
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
Do not pour fabric softener
directly on the clothes
?
Detergent is flushed from the dispenser
the beginning of the cycle.
at
F
unction
Recommended
courses
according
Fabric
to the
laundry type
Maximum
Proper
Program
Option
Type
First check if
laundry
is machine
95˚C
in
in
kWh
Minutes
Time Save
Rinse+
(white cotton, linen
towel and sheets...)
7.5
kg
2.74
165
7.5
kg
1.10
161
0.45
99
0.41
63
0.28
61
0.03
55
0.35
30
Crease Care
Color fast gaments
(shirts, night dresses,
60˚C
pajamas...)and lightly (30˚C, 40˚C,
soiled white
Time
Pre Wash
washable.
Cotton
Load
Temp.
Energy
60˚C-Eco)
Pre Wash
Time Save
Rinse+
Crease Care
cotton(underwear...)
Synthetic Polyamide, Acryic,
Polyester
Pre Wash
40˚C
Time Save
(60˚C, 30˚C)
Rinse+
Less than
3.5
kg
Crease Care
Delicate
Delicate
laundry
easily damaged
Wool/Silk
30˚C
(40˚C, Cold)
Rinse+
Crease Care
Machine washable
woolens with pure
new
Hand
wool
or
silk
only
30˚C
Rinse+
(40˚C, Cold)
Crease Care
"Hand Wash" marked
Wash
delicate and wool
Cold(30˚C )
laundry
Colored
Quick 30
which is
fast.
Pre Wash
Laundry
lightly soiled
30˚C
Rinse+
Crease Care
Rinse+
Crease Care
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
Less than
2.0
kg
If the
laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is
available in Cotton and Synthetic Program.
Eco : By selecting Eco function, the water temperature is reduced and washing time is lengthened.
So you can economize in your consumption of heating energy.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent
:
residue.
13
H
ow
to
washer
use
De
e
Was
CeaseCa
1. Cotton
?
?
?
Press the
Press the
Power(
)
)
button.
Press the
?
-
-
-
-
Wash
:
main wash
Rinse
:
3 times
pressing
Power(
) button
to start.
each button.
For
selecting the each conditions, please
refer to the page15~page20
Spin : 1500 rpm [WD(M)-15220(5)FD]
1300 rpm [WD(M)-13220(5)FD]
1100 rpm [WD(M)-11220(5)FD]
Water temperature
Selecting
Select the conditions which you want to
use, by turning the program dial and
?
Initial condition
-
e
on.
button to start.
Start/Pause(
Save
2. Manual
automatically
selected upon power
me
ec
:
60˚C
Press the
?
Start/Pause(
) button.
3. Beep on/off
Program : Cotton
?
?
The
beep on/off function can be set by
pressing and holding the Opt.2 and
Spin button simultaneouly.
The
beep
on/off function
can
be set at
any time and it is automatically canceled
when power failure occur.
Also the
beep
on/off function works
when power is off.
14
to
ow
H
use
washer
De
me
ec
1300
Save
1000
800
(3)
(2)
(1)
(2)
(3)
Button
Dial
:
:
Power
(4)
(5)
(6)
Program
Button
:
Start/Pause
(4)
Button
:
Button
:
Button
:
Option
Option
Spin
(8)
(5)
(6)
(1)
(7)
(7) Button : Time Delay
(8) Child Lock
1
2
Option
2. Rinse+
Used to additional rinse, which may assist
in removing traces of detergent residue.
?
By selecting Rinse+ function,
?
time and the rinse water
?
By pressing the Option button, all
Option functions may be selected.
-
-
Pre Wash
-
Time Save
-
Rinse
+
?
Crease Care
?
option
time of
a
To
this
use
button
can
This
heavily soiled,
"Pre Wash"
is effective.
Do not
use
on or near
cause
press the Time Save
before the wash program is
Pre Wash stain
the
damage
Washer,
to
removers
they may
the control panel's
as
finish.
option
option is available
Synthetic program.
is
Pre Wash is available in Cotton and
NOTE
be used to reduce the
started.
?
laundry
Synthetic.
wash program.
once
If the
course
1. Time Save
This
increased.
3. Pre Wash
?
?
are
the rinse
4. Crease Care
with
Cotton,
?
If you want to prevent crease, select this
button with spin speed.
15
H
to
ow
use
washer
Spin
?
1500
1300
100
1200
1000
1000
800
800
800
[WD(M)-15220(5)FD]
[WD(M)-13220(5)FD]
1. Spin selection
Spin Speed
?
program
as
is available
chosen.
[WD(M)-11220(5)FD]
2. No spin
according
to the
If
spin is selected,
after draining water.
?
follows.
WD(M)-11220(5)FD
-Cotton,Rinse+Spin,Quick 30
Rinse Hold-No Spin-400-800-1000-
?
By pressing the Spin button,
the spin speed can be
1100
no
The
required lamp
identification.
will
the washer stops
light
up for
3. Rinse Hold
Delicate
-
Rinse Hold-No
-
Spin-400-800
Wash
Synthetic,Wool/Silk,Hand
Rinse Hold-No Spin-400-800-1000
WD(M)-13220(5)FD
-Cotton,Rinse+Spin,Quick 30
Rinse Hold-No Spin-400-800-1000-
?
1300
Rinse Hold-No
-
Spin-400-800
Synthetic,Wool/Silk,Hand Wash
Rinse Hold-No Spin-400-800-1000
WD(M)-15220(5)FD
-Cotton,Rinse+Spin,Quick 30
Rinse Hold-No Spin-400-800-1200-
?
1500
-
Delicate
Rinse Hold-No
-
Spin-400-800
Synthetic,Wool/Silk,Hand Wash
Rinse Hold-No Spin-400-800-1200
16
Is selected
by pressing
the
repeatedly
this function leaves clothes in
spin
button
the machine; suspended in the water after
a rinse without entering into spin.
?
To
proceed through
to a drain or
spin,
once the rinse hold function is completed
using to program dial scroll to the required
program.
Delicate
-
?
(Spin)
The
required lamp
identification.
will
light
up for
H
ow
to
use
Water
washer
Child Lock
Temp.
If you choose to lock the buttons on the
control assembly to prevent tampering this
function may be selected.
1. Child Lock
?
?
By turning
the
temperature
-
button and
Opt.
be set
2
by pressing the Opt.
button simultaneously.
1
be selected.
Cold
-30˚C/40˚C/60˚C/95˚C
?
?
1. Water Temperature
?
can
the water
Program Dial,
can
Child Lock
required temperature lamp
for identification.
For the
more
refer to
the
detailed
will
light
are
inoperable
except power button.
To deactivate Child Lock system, press
Opt. 1 and Opt. 2 button simultaneously
again.
Water temperature can be selected
according to the program.
The
When child lock is set, all buttons
up
information, please
page13.
?
To
change
to the desired program, whilst in
child lock mode.
1. Press both
once
Opt.
1 and
Opt.
2
together
again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
again.
Change
the desired
program
?
The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child Lock works when
power is off.
17
to
ow
H
use
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
Delay"
Turn on the water tap.
"Time
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
8 programs
?
in
Lamp
?
How to set "Time
-
-
-
Delay"
Program
dial to select
the program you require.
Press Time Delay button and set the
?
-
Press the Start/Pause button.
will
When Start/Pause button is
pressed, the
Cotton program is automatically selected.
By turning the Program dial, the program is
Quick 30
Wash-
If Time
pressed, "3:00" is
displayed. The maximum delayed time is
Delay
button is
19:00 hours and the minimum time is 3:00
of the button advances
Each
time
pressing
delay by one
on
hour.
-
-
To cancel the time
delay, press the Power
button.
?
?
Time
'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
Delay
According to
is
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
Cotton
Delicate-
-
Drain
Rinse+SpinWool/Silk
Synthetic".
-
-
Hand
-
Regarding to the laundry type for each program
Please refer to the page13.
-
?
"
2. Course
hours.
?
up to indicate selected
light
selected in order of
(":" blinks.)
?
to the
1. Program
desired time.
-
according
program.
Press Power button.
Turn the
available
laundry type.
the drawer.
?
are
may vary.
Cotton
Quick 30
Synthetic
-
-
-
Delicate
Wool/Silk
Hand Wash
-
-
Rinse+Spin
Drain
ow
H
to
use
washer
Power
Start/Pause
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
?
Press the Power button to turn power
and off
To cancel the Time
power button
?
?
If
temporary stop of wash cycle is
needed, press the Start/Pause button.
When in Pause, the power is turned off
automatically after 4 minutes.
?
at the end of the wash
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
if the
2. Initial Program
2. Pause
?
Delay function,
should be pressed.
on
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
3. Detect
[WD(M)-11220(5)FD]
-
?
While the "Detect" is shown in the
the machine rotates
slowly
display
?
Available in Cotton and
Program
/ Main wash /
Normal Rinse/1100 rpm / 60˚C
and detects
how many laundries are loaded in the
drum. It will take a few seconds.
Cotton
[WD(M)-13220(5)FD]
-
Cotton
Program
/ Main wash /
Normal Rinse/1300 rpm / 60˚C
Synthetic.
[WD(M)-15220(5)FD]
-
Cotton
Program
/ Main wash /
Normal Rinse/1500 rpm / 60˚C
19
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
display
When child lock is selected, the
is displayed.
?
"
?
?
When time
delay is selected, it shows
the remaining times to finish the selected
?
program.
?
diagnosis display
If the machine encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
:
:
a
fault
During washing cycle, the remaining
washing time is displayed.
Recommended program
-
during
-
the associated fault will be
-
-
-
Water pressure sensing error
Problem of overfilling water
:
Door is not closed
:
Over load in motor.
:
Over load in motor.
:
Water inlet trouble
:
Drainage
"
4. Time left
"
2. Self
trouble
:
Unbalanced load
:
Water temperature trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
-
-
-
-
?
by
manufacturer.
Cotton 95˚C : around 2 hours and 45 minutes
Cotton 60˚C
:
around 2 hours and 41 minutes
Synthetic
:
around 1 hour and 39 minutes
Delicate
:
around 1 hour and 3 minutes
Wool/Silk
around 1 hour and 1 minute
:
Hand Wash : around 55 minutes
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 23 minutes
Drain : around 1 minute
The
washing time may vary by the
amount of laundry, water pressure,
temperature and other washing
water
conditions.
?
If
an
suds
unbalanced load is detected
or
if the
program operates, the
wash time may be extended.
removing
(Max. increasing
20
washing
time is
45minutes.)
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
any threads
or
1.
the lower
Open
cap ( ) by using
opening
cover
draining
a
the door in
2.
this time
plug ( )
water
the hose.
pull
out
remove
whatever
an
if the water is hot.
cleaning
the drain pump,
use a
flowing
out emergency
carrying
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
coin. Turn the drain
to
smooth
laundry.
running of your machine.
the drain and then open the pump filter to
Allow the water to cool down before
or
ensure
left in the
objects.
Be careful when
emptying
objects
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
2
3
1
3
2
21
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
washing
?
replace
the drawer and
continuously
clogs appliances,
build up in
and if it is not
the
washing
If you
run a
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
which should
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
recess
drum
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
use
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
hose(s)
Drain hose is kinked
or
are
clogged.
clogged.
clogged.
The drain filter is
Fully open tap.
Check the filter of the inlet hose.
Clean and
straighten the
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
imbalance
an
or
2 similar items to
load to allow proper
bath mat, both robe,
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
Water overfills due to the
faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
26
help
etc.) this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
(ex.
?
drain hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Check another tap in the house.
Straighten hose(s).
kinked.
The filter of the inlet
Solution
Water level
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
and call for
T
erms
of Warranty
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
product
it
means
the
product
is
symbol is attached to
covered by the European
a
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and
3. The correct
human health.
4. For more detailed information about
disposal
of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
?
?
or
by pests
product
for
or
change
example,
the set-up of the
product.
rats or cockroaches etc..
example
water drain
sound, spin
warming beeps.
Correcting
the installation for
example, levelling
Normal maintenance which recommended
by
the
Replace
the owner's manual.
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
Incidental
If this
consequential damage
appliance.
:
or
correct house
the pump and
plumbing.
repairs.
or
product
(Example
wiring
of drain.
product, adjustment
Removal of
with this
?
of
vibration that is considered normal for
inlet hose
?
on use
to
personal property
caused
by possible
defects
is used for commercial purpose, it is not warranted.
Public
places such
center, dormitory)
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF