LG | WM-1176FHB | LG WM-1176FHB Owner’s Manual

Washing
Machine
OWNER'S MANUAL
WM-1371(6)FHB
WM-1271(6)FHB
WM-1171(6)FHB
WM-1071(6)FHB
WM-8070FHB
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
Jumbo drum
40%
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
More economical
Intelligent
Wash
by Intelligent
System
Wash
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
water level and
consumption.
Child-Lock
The Child-Lock
pressing
Wash
Low noise
Rinse
system has been used
any button to
speed
change
control
to
prevent children from
the program
during operation.
system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
Do not install
be
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
or
published user-repair
instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
Do not wash
or
dry
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
in, washed in, soaked in,
or
on,
with,
this or any other
Do not leave the washer door open.
An open door could entice children to
or
appliance
or
?
inside
?
Never reach into washer while it is
?
The
hang
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply
or
disconnect the washer at the household
on
?
moving.
completely stopped.
laundry process
retardant of fabrics.
or
distribution
crawl inside the washer.
until the drum has
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
unplug
play
appliance.
the door
?
children.
Do not allow children to
?
using
instructions.
out.
?
to persons when
combustible
recommended in the user-maintenance
?
injury
cleaned
Do not
or
or
washer, follow basic precautions, including the following:
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
S
pecification
Power
If the
plug
supply cord is damaged,
replaced by the
it must be
manufacturer
or its service agents
similarly qualified person in
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
feet
cover
cap
plug
Name
Power
supply
:
Front
:
220-240V~,50Hz
600mm(W)
63kg
7.0kg
Size
:
Weight
Wash capacity
:
Max. Watt
:
Spin speed
:
:
loading washing
machine
600mm(D)
850mm(H)
2100W
No
Spin/400/600/800[WM-8070FHB]
Spin/400/600/800/1000[WM-1071(6)FHB]
No Spin/400/600/800/1100[WM-1171(6)FHB]
No Spin/400/600/800/1000/1200[WM-1271(6)FHB]
No Spin/400/600/800/1100/1300[WM-1371(6)FHB]
:75
(10.7 /kg)
: 0.3-10kgf/
(30-1000kPa)
No
Water
consumption
Permissible water pressure
The appearance and
specifications
may be varied without notice to raise the units
Accessories
Hot/Cold(2EA)
4
Spanner
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
particular
pay
at all times.
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
The
appliance
is fitted with transit bolts to
Removing
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
removed, it may cause
noise and malfunction.
are
vibration,
not
use.
bungs.
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with
than
Laundry
one
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
more
appliance.
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
identifying
letter E
or
by
the earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
3.
extension cord
cord is
5. The
?
?
appliance
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
use an
2. If the
must be
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
Connecting
water
hose
supply
Water
supply pressure must be between
(0.3~10kgf/cm2)
30kPa and 1000kPa
Don't
strip or crossthread when connecting
Inlet hose to the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
Hot water
?
tap
Make sure that there is no kink
hose and that it is not crushed.
on
the
Cold
Cold
Hot(option)
water
When your washer has two valves,
tap
?
?
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
Tap without
Normal
1. Unscrew the fixing
attach the tap.
screw
thread &
2.
to
screw
type inlet hose
Push the connector up till the
rubber
packing
with the
3.
is in
tap. Then
tight contact
tighten the 4
screws.
Tap without
Normal
1. Untighten the upper
thread &
connector
2.
touch
one
packing
contact with the
Upper
Rubber
Connector
Fixing
tighten
packing
screw
type inlet hose
Push the upper connector up till
the rubber
screw.
Middle
the 4
Rubber
connector
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
3.
Connect the water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the
remove
Guide
the
tap is
Connector
Water
hose
Middle
guide plate.
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
tap. Then pull the
down, pushing the
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal
tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension
tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable
the door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation ! Keep all packaging well away from children
Installation of drain hose
ca.
ca.
145
100
cm
cm
?
max.10cm min.60cm
When
installing the drain hose sink,
it tightly with a string.
secure
ca.
105
cm
?
Proper securing
of the drain hose will
protect the floor from damage due
water
to
leakage.
Laundry tub
ca.
100
cm
Hose
ca.
145
Retainer
cm
Tie
max.
ca.
?
min.60cm max.10cm
cm
The drain hose should not be
higher
?
105
than 100
Proper securing
cm
?
100cm
min. 60cm
strap
min. 60cm
placed
above the floor.
of the drain hose will
protect the floor from damage due
water
100cm
max.
to
leakage.
When the drain hose is too
long,
do
not force back into the washer. This
will
cause
abnormal noise.
9
I
nstallation
Level
adjustment
1.
Adjusting the washing machine level
properly prevents excessive noise and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
a corner
of
room.
2. If the floor is uneven, adjust the leveling
feet as required. (do not insert pieces of
wood etc. under the
Make
sure
feet)
that all four feet
are
stable
and
Adjustable
Higher
Adjustable
feet
resting on the floor and then check
that the appliance is perfectly level. (use
a spirit level)
Lower
feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
(Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the legs again.
all.
10
C
before
are
Caring
before
washing
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always
transfer
sort dark colors from
soiled items with
Soil
3.
Caring
before
colors and whites. Wash
separately as dye and lint
possible, do not wash heavily
one.
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
pale
discoloration of white etc. If
causing
lightly soiled
can occur
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets to
make
sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
dding detergent
A
Adding detergent
1. The
Dispenser
and fabric softener
3. Detergent dosage
Drawer
?
The
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
used more than the
recommended amount, too many suds can
occur and this will decrease the washing result
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent
for water
?PreWash+MainWashU
motor.
usage may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the clothes
directly
12
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
at
unction
F
Recommended
courses
Fabric
according
to the
Maximum
Proper
Program
Temp.
First check if
Whites
95˚C
Eco
(60˚C, 50˚C,
Rinse+
40˚C)
Bio
(white cotton, linen
towel and
sheets...)
Liter
kWh
Minutes
Rating
85
2.74
158
Rating
75
0.72
115
Synthetic Polyamide, Acryic,
Polyester
Less than
58
0.6
88
Delicate
Delicate laundry
easily damaged
(silk, curtains...)
58
0.41
58
Wool
40˚C
(50˚C, 60˚C,
Cold, 30˚C)
Hand
"Hand Wash"
Wash
marked delicate and
wool
Pre Wash
:
(40˚C, Cold)
53
0.28
58
51
0.03
57
laundry
Bio
Rapid
Pre Wash
Eco
Rinse+
(40˚C, Cold)
Cold(30˚C,
40˚C)
is
4.0
kg
Bio
Less than
Rinse+
30˚C
laundry
If the
Rinse+
30˚C
Machine washable
woolens with pure
new wool only
Eco
40˚C
pajamas...)and
(50˚C, 60˚C,
lightly soiled white Cold, 30˚C)
cotton(underwear...)
3.0
kg
Less than
Rinse+
Rinse+
heavily soiled,
2.0
kg
Less than
2.0
"Pre Wash"
available in Coloureds, Whites and
kg
course
is recommended. Pre Wash is
Synthetic Program.
By selecting Eco function, the water temperature is reduced and washing time
lengthened. So you can economize in your consumption of heating energy.
Rinse+
:
in
Load
Pre Wash
(shirts, night dresses,
Bio
in
Rapid
Coloureds Color fast gaments
:
Energy
in
Pre Wash
laundry is machine
washable.
:
If you wish to rinse more, the Rinse+ function will
If you want to elimenate protein stains
by pressing the option button.
NB. You
can
only
Time
Water
Option
Type
Eco
laundry type
remove
any trace of
is
detergents.
(milk, blood, chocolate...), you may select Bio function
select Bio function and Eco function when
temperature is higher than 60˚C in
Whites, Coloureds and Synthetic.
13
H
ow to use
1. Coloureds
washer
automatically
selected upon power
2. Manual
?
Press the Power button to start.
?
?
Press the Start/Pause button.
?
?
Initial condition
-
Wash
:
Main wash
-
Rinse
:
3 times
Water temperature
:
40˚C
Program : Coloureds
14
Select the conditions which you want to
use, by pressing each button.
conditions, please
refer to the page15~page20
?
-
Press the Power button to start.
For selecting the each
-Spin:800rpm
-
Selecting
on.
Push the Start/Pause button.
H
ow to use
(1)
(1)
(2)
(3)
Button
:
Button
:
Button
:
washer
(2)
(3)
(4)
(5)
(7)
By pressing
button, only
the
Option
one Option
?
Button
Dial
:
:
Start/Pause
Program
Button
:
Power
By selecting Eco function, the water
temperature is reduced and washing time is
-
Bio
lengthened. So you can economize
consumption of heating energy.
-
Rinse+
NB. You
-
Eco
-
Pre Wash
function may be selected.
can
in your
select Eco function when
temperature is higher than 60 C in
Whites, Coloureds and Synthetic.
4. Pre Wash
1. Bio
If you want to eliminate protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing the option
NB. You
(7)
(8)
(9)
(9)
3. Eco
Option
?
(8)
(4) Child lock
(5) Button : Time Delay
(6) Button : Rapid
Option
Spin
Temp.
?
(6)
can
button.
temperature is higher than
60 C in
If the
laundry
course
?
select Bio function when
Coloureds and
?
is
Pre Wash is available in
Coloureds and
Whites,
Synthetic.
heavily soiled,
"Pre Wash"
is effective.
Whites,
Synthetic.
The required lamp
identification.
will
light up for
2. Rinse+
?
Used to additional
removing
?
traces of
rinse, which may assist in
detergent
By selecting Rinse+ function,
Time and the Rinse water
are
residue.
the Rinse
increased.
15
ow to use
H
washer
Spin
?
WM-1071(6)FHB
-
Whites /
Coloureds/Synthetic
800U 1000U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
[WM-8070FHB]
[WM-1071(6)FHB]
Spin
[WM-1171(6)FHB]
?
WM-1171(6)FHB
-
Whites /
Coloureds/Synthetic
800U 1100U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
[WM-1271(6)FHB]
?
By pressing
can
[WM-1371(6)FHB]
the
Spin button,
?
the
spin speed
WM-1271(6)FHB
-
be chosen.
Whites / Coloureds
800U 1000U 1200U Rinse HoldU
No
1.
?
Spin selection
Spin speed
program
as
is available
-
according
-
16
SpinU
Delicate
400U 600U 800U Rinse HoldU No
Whites / Coloureds / Synthetic
800U Rinse HoldU No SpinU 400U 600
Delicate / Wool / Hand Wash
400U 600U 800U Rinse HoldU No
Synthetic
400U 600
follows.
WM-8070FHB
-
400U 600
800U 1000U Rinse HoldU No
to the
-
?
SpinU
Spin
-
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
Spin
ow to use
H
washer
Water
?
Temp.
WM-1371(6)FHB
-
By press the Temp button,
the water temperature can
?
Whites / Coloureds
800U 1100U 1300U Rinse HoldU
No
-
SpinU 400U
Synthetic
be selected.
600
Cold
-
800U 1100U Rinse HoldU No
-30˚C/40˚C/50˚C/60˚C/
SpinU
95˚C
400U 600
-
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
1. Water
?
2. No
spin
below
-
?
If
spin is selected,
draining water.
no
The
required lamp
identification.
will
the washer
stops after
-
light up for
Is selected
-
-
by pressing
the
Spin
button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
?
To
proceed through
to a drain or
temperature
according
Whites
95˚C U 40˚C
Coloureds &
40˚CU
3. Rinse Hold
?
Water
spin,
completed using to
to the required program.
once
Temperature
U
can
be selected
as
to the program.
50˚C
U
60˚C
Synthetic
50˚CU
60˚CU
ColdU
30˚C
Delicate & Wool
30˚C U 40˚C U Cold
Hand Wash
Cold
U
30˚C
U
40˚C
The
required temperature lamp
identification.
For the
more
detailed
will light up for
information, please refer
to the page13.
the rinse hold function is
program dial scroll
(Spin
or
Pump)
The required lamp
identification.
will
light up for
17
H
ow to use
washer
Child lock
Time
Delay
Time Left
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
Time Left
1. Time
Delay
Preparing washing before starting
1. Child lock
"Time
Delay"
?
Child lock
can
be set
by pressing and holding the
Delay button
button and Time
Temp.
simultaneously.
-
-
-
Turn
on
the water
tap.
Load
laundry and close the door.
Place the detergent and fabric softener
in
the drawer.
?
Time Left
How to set "Time
-
-
?
When child lock is set, all buttons
are
inoperable.
-
?
To deactivate Child lock
system, press and hold the
Delay"
Press Power button.
Turn the
Programme dial
to select
the program you require.
Press Time Delay button and set the
desired time.
Temp. and Time Delay button simultaneously again.
-
Press the Start/Pause button.
(":" blinks.)
Time Left
?
To
change to the
?
19:00 hours and the minimum time is 3:00
desired program, whilst in child
hours.
lock mode.
1. Press and hold both
together
once
Temp. and Time Delay
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
?
again.
Each
time
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
?
To cancel the time
?
Change
Time
or
can be set at any time and it is
canceled
when operational errors
automatically
occur. Also Child lock works when power is off.
18
on
press the Power
?
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
program
The child lock
delay,
advances
button.
the desired
?
pressing of the button
delay by one hour.
is
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
may vary.
washer
ow to use
H
Start/Pause
Rapid
?
the
By pressing
Rapid
button, Rapid function is
selected.
1.
?
1. Start
Rapid
The
Rapid function reduces the entire program
by approximately half an hour.
Program time will be extended if the washer
encounters an abnormality during the cycle
?
?
program.
Rapid is available in Whites, Coloureds
?
will
light up for identification.
Programme
?
If
When in
Lamp
will
after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
at the end of the wash
light
(Programme)
program.
1. Power
Program
?
?
When Start/Pause button is
Coloureds program is
-
the
pushed, the
automatically selected.
the program is
selected in order of "Coloureds U Synthetic
By turning
U
Delicate
U
Hand WashU
PumpU
Wool
U
Rinse+Spin
U
Spin
U
?
on
and
To cancel the Time
Delay function,
pressed.
the
power button should be
2. Initial
?
Whites".
Program
When the Power button is
pressed,
the
washer is
ready for Coloureds program. And
the other initial conditions as follows.
?
So, if you
want to advance into the
-
Whites
-
-
Coloureds
-
-
Delicate
Wool
Hand Wash
-
-
-
Rinse+Spin
Spin
Pump
without
washing
the program, just press
Start/Pause button and then the washer will
cycle
2. Course
Synthetic
Press the Power button to turn power
off
Program dial,
Regarding to the laundry type for each program
Please refer to the page13.
-
cycle.
Power
up to indicate
selected
1.
cycle.
Pause, the power is turned off
type.
?
pause the wash
temporary stop of wash cycle is needed,
automatically
?
9 programs are
available
according to
the laundry
or
press "Start/Pause" button.
?
required lamp
cycle
2. Pause
program.
The
This Start/Pause button is used to start
wash
time
changing
proceed.
Initial program
-
Coloureds
Program / Main wash /
Normal Rinse/800 rpm / 40˚C
19
H
washer
ow to use
3.
Display
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special function display
When child lock is selected, the
is displayed.
"
"
?
4. Time left
?
When time
the
delay is selected, it shows
remaining times to finish the selected
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
program.
-
2. Self
-
diagnose display
-
?
If the washer encounters
operation,
displayed.
a
fault
during
-
the associated fault will be
-
-
-
"
"
:
"
"
:
"
"
"
"
"
"
"
"
"
"
"
"
"
"
Water pressure
Problem of
sensing
overfilling
error
Door is not closed
:
Over load in moter.
:
Over load in moter.
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
-
?
Whites
:
Coloureds
around 2 hours and 38 minutes
:
around 1 hour and 55 minutes
around 1 hour and 28 minutes
Synthetic
:
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Rinse+
Spin
:
Pump
Spin
:
around 19 minutes
around 11 minutes
:
around 1 minute
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
20
-
water
:
by
manufacturer.
?
If
an
unbalanced load is detected
the suds
or
if
removing program operates,
the wash time may be extended.
(Max. increasing time is 45minutes.)
aintenance
M
Before
the washer interior,
cleaning
unplug
the electrical power cord to avoid electrical shock to
avoid electrical shock hazards.
When
of the appliance, cut off the mains cable, and destroy the plug Disable the door
prevent young children being trapped inside.
disposing
lock to
The water inlet filter
"
-"
detergent
-
message will blink
error
If your water is very hard
become
on
the control
panel
when water does not enter the
drawer.
clogged.
a good
It is therefore
or
contains traces of lime
deposit,
the water inlet filter may
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain
using
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
Be careful when
objects
ensure
or
objects.
draining if the water is hot.
cleaning the drain pump, carrying
Allow the water to cool down before
emptying
1.
or
opening
Open the lower cover
cap( )byusinga
the door in
2.
an
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove out any
At
foreign material
( ). After
the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. When
( )
open to the left.
cleaning,
turn
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
aintenance
M
Dispenser drawer
After
a
while
detergents
and fabric softeners leave
a
deposit
?
It should be cleaned from time to time with
a
?
If necessary it
from the machine
can
downward and
?
To facilitate
be removed
jet of running
water.
by pressing
the catch
it out.
by pulling
cleaning,
completely
in the drawer.
the upper
part of the fabric softener compartment
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
washing
If you live in
seen
a
?
?
?
replace
the drawer and
hard water area, limescale may
and thus not
which should
run a
drum
easily
continuously
build up in
places where
it cannot be
removed.
Over time the build up of scale
be
recess
old toothbrush.
clogs appliances,
and if it is not
kept
in check these may have to
replaced.
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
of rust
can
be caused
are
suitable for
washing
use.
Descaler may contain chemicals that may
Remove any
Never
22
use
spots with
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
by
small
the drum.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
opening, flexible gasket and
Run washer through a complete cycle using hot water.
Repeat process if necessary.
Dry
around the washer door
NOTE
Remove hard water
door
glass.
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
temperatures,
an area
1. Turn off water
Plug
4. Add
freezing
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
where
follow these instructions to
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
9. To
remove
through
a
an
expelled.
cord, dry the drum interior, and close the door.
dispenser drawer,
8. Store washer in
for 1minute to drain out all water.
drain and
dry excessive
water from the
compartments.
upright position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T
roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults
early stage and react appropriately.
When the machine does not function properly or does not function at all, check the following points
before you contact your service provider.
at
an
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop washer
and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
Vibrating
sound
noise
?
?
a
Heavy wash loads may produce
thumping sound. This is usually
probably
normal.
redistribute wash load.
Have all the transit bolts and
packing
?
the
If not removed
been removed?
Are all the feet
If sound continues, washer is
out of balance. Stop and
during
installation, refer
resting firmly
on
for
removing
to Installation
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
detergent or unsuitable
detergent may cause excessive
foaming which may result in water
Oversudsing
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
supply tap
completely open.
is not
?
Water inlet
?
The filter of the inlet
hose(s)
are
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug
sure
fits
tightly
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T
roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet
hose(s)
are
The filter of the inlet
Fully open tap.
Straighten hose(s).
kinked.
hose(s)
Check another tap in the house.
Check the filter of the inlet
are
hose(s).
clogged.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
has
an
unbalance
detection and correction
system.
individual
are
heavy
articles
If
or
straighten
the drain hose.
2 similar items to
Rearrange
spinning
load to allow proper
loaded
bath mat, both robe,
?
Is the door
Close the door.
opened?
If
"
"is not released, call for service.
Unplug the
power
plug
service.
?
Water overfills due to the
faulty water
valve.
26
help
etc.), this
system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
(ex.
?
appliance
or clogged.
clogged.
Close the water tap.
Unplug the power
Call for service.
?
Water level
?
Over load in motor.
?
Over load in motor.
sensor
has malfunctioned.
plug.
and call for
T
of
erms
Warranty
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to use the
If the product
rating plate.
is connected to any
voltage
product.
other than that shown
the
Act of God.
If the fault is caused
by accident, neglect, misuse
If the fault is caused
by factors other than normal domestic
or
on
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
on use
If the fault is caused
Noise
or
product
pests for
change
or
example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
by
of
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by the
owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
?
?
?
?
Replace
fuses in
or
correct house
Correction of unauthorized
Incidental
wiring
or
correct house
repairs.
consequential damage to personal property
defects
with this appliance.
possible
If this
or
product
(Example
:
plumbing.
caused
by
is used for commercial purpose, it is not warranted.
Public
places
such
as
public bathroom, lodging house, training
center, dormitory)
If the product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
27
a
For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
P/No.: 3828ER3010X
LGEUK SERVICE WEB-SITE
:
-
5:30PM
www.lgelectronics.co.uk
Download PDF

advertising