LG | WM-12397TD | LG WM-12392TD Owner’s Manual

P/No.: 3828ER3042Q
Washing
Machine
OWNER'S MANUAL
WD-1439(0~9)SD
WD-1239(0~9)SD
WD-1039(0~9)SD
WD-1439(0~9)ND
WD-1239(0~9)ND
WD-1039(0~9)ND
WD-1439(0~9)TD
WD-1239(0~9)TD
WD-1039(0~9)TD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Protection
against
creases
With the alternate rotation of the drum,
creasing
in the
laundry
is
minimized.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The child-lock system is to be used for preventing children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
Auto Restart allows the program to restart all
power failure. It does from the stage where it
Direct Drive
by itself in
stopped.
System
The advanced Brushless DC motor rotates the drum
without belt and
C
case
directly
pulley.
ontents
Warnings....................................................................................3
Specifications.............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
of
W
arnings
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
Before installation, check exterior
do not install.
?
Do not install
be
?
?
?
?
?
?
has,
using
dry articles that have been cleaned
in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode.
?
Do not slam the washer door closed
to the weather.
understand and have the skills to carry out.
Keep the area underneath and around your
free of combustible materials such
as
Do not wash
or
or
try
to force
the door open when locked. This could result in
damage to the washer.
?
?
etc.
Close supervision is necessary if this appliance is
used by or near children. Do not allow children to
play on, with, or inside this or any other appliance.
Keep small animals away from the appliance.
Do not leave the washer door open.
An open door could entice children to hang on the
door or crawl inside the washer.
Never reach into washer while it is moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame retardant
of fabrics.
To avoid such a result, carefully follow the garment
manufacturer's wash and care instructions.
When the machine
runs
high temperature, the front
door may be very hot. Don't touch it.
To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
the washer at the household distribution
?
?
?
panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
Do not
This
to persons when
?
store the washer where it will
lint, paper, rags, chemicals,
?
If it
published user-repair instructions that you
appliances
?
damages.
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or
?
exposed
injury
precautions, including the following:
?
or
or
push down the door excessively,
could topple over the washer.
when washer door open.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
appliance must be grounded.
In the event of malfunction
or
breakdown, grounding will reduce the risk of electric shock by providing a path
appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
of least resistance for electric current. This
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper connection
of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
-
3
S
pecifications
WD-1439(0~9)ND
WD-1239(0~9)ND
WD-1039(0~9)ND
WD-1439(0~9)SD
WD-1239(0~9)SD
WD-1039(0~9)SD
Front
Name
Power
Weight
/ Max. Watt
Wash
capacity
Water
consumption
,
600mm(W)x360mm(D)x850mm(H) 600mm(W)x440mm(D)x850mm(H) 600mm(W)x550mm(D)x850mm(H)
56kg
/ 2000W
3.5
42
0.3
Pressure
Rinse Hold/No
Rinse Hold/No
Rinse Hold/No
The appearance and
59kg
kg
Permissible water
Spin Speed
machine
220-240V~ 50Hz
supply
Size
loading washing
WD-1439(0~9)TD
WD-1239(0~9)TD
WD-1039(0~9)TD
-
/ 2000W
64kg
5kg
7kg
60
56
10kgf/cm2 (30~1000kPa)
Spin/400/800/1000 [WD-1039(0~9)SD/1039(0~9)ND/1039(0~9)TD]
Spin/400/800/1200 [WD-1239(0~9)SD/1239(0~9)ND/1239(0~9)TD]
Spin/400/1000/1400 [WD-1439(0~9)SD/1439(0~9)ND/1439(0~9)TD]
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
/ 2100W
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
In countries where there are areas which may be subject to infestation by cockroaches or other vermin,
pay particular attention to keeping the appliance and its surroundings in clean condition at all times.
Any damage which may be cause by cockroaches or other vermin will not be covered by the appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future
remove
the bolts
?
If
they
heavy
along
with the rubber
bungs.
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
use.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:right & left side)
Do not place or store laundry products on top of washer at
any times.
They can damage the finish or controls.
Tub
approx.
2cm
Positioning
Install the washer
Make
sure
Never
?
try
on a
flat hard floor.
that air circulation around the washer is not
to correct any
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or
similar materials
under the washer.
If it is
impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event
?
?
?
a
breakdown.
With the washer installed
?
of
appliance
is
stable, and
the underside of the
BS
a
adjust
all four feet
using the transit
approximately 20mm
clearance of
bolt spanner provided ensuring the
is left between the top of the washer and
work-top.
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
Blue(Neutral)
Fuse
L
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may
not
correspond
with the coloured
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the
by the earth symbol
or
or
coloured Green
or
plug
markings identifying
which is marked with the letter E
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
qualified person in order to avoid a hazard.
Always unplug the machine and turn off the
4. Connect the machine to
5. The
?
?
?
appliance
must be
water
supply after
positioned
so
that the
plug
is
easily
its service
agents
or
similarly
use.
earthed socket in accordance with current
an
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses may
burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below freezing
point.
If the appliance is delivered in the winter months and temperatures are below freezing : Place the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing Machine
is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply hose
supply pressure must be between 30kPa
and 1000kPa (0.3~10kgf/cm2)
Don't strip or crossthread when connecting
Water
Inlet hose
If the
to
water
1000kPa,
a
the valve.
supply pressure is more than
decompression device should be
installed.
?
Two rubber seals
are
supplied
with the water
inlet hoses.
are
used for
preventing
They
water leaks.
?
?
Hose connector
?
Rubber seal
Make
sure
the connection to taps is
tight
enough.
Periodically check the condition of the hose
and replace the hose if necessary.
Make
sure
that there is
no
kink
on
the hose
and that it is not crushed.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
till
water
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
?
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
?
?
?
?
The drain hose should not be
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
preferably
in
a
room.
Timber
NOTE
on a
suspended type flooring
or
excessive vibration and unblance
errors.
2. If the floor is uneven,
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
feet
as
required. (do
not
resting on the floor and
then check that the appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
NOTE
that all four feet
may contribute to
In the
are
stable and
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
that the
on a
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
be
clean, dry and level.
flat hard floor.
(Slippery floors)
Position each foot
?
must
on
sections and stick the
Tread Mate is
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine is
to
(Cut Tread
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
to at
corners
Rubber
under each
foot,
least 2 floor beams with
of the
room,
Cup
screws.
where the floor is
more
stable.
Insert the rubber cups to reduce vibration.
You
?
?
?
?
?
can
obtain the rubber cups
(p/no.4620ER4002B) from
the LG spares
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
detergent)
allow the unit to wash
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate
Separate
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
lint collectors
producers and
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pretreat dirt and stains
a
little
to
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help shift dirt.
11
A
dding detergent
Adding detergent
1. The
Dispenser
and fabric softener
3.
Drawer
Detergent dosage
?
The
?
If too much detergent
max
detergent should be used according to the
instruction of the detergent manufactrurers.
can occur
result
is
used,
and this will decrease the
heavy load to
(Causing malfunctions)
?
?
or cause
Use powder
Main wash
only
suds
washing
the motor.
If suds occur too much, please
detergent amount.
loading
?
too many
reduce the
detergent only for the front
washer.
?PreWash+MainWash
Detergent usage may need to be
adjusted for water temperature, water
2.
hardness, size and soil level of the load.
For best results, avoid oversudsing.
?
Adding Fabric Softener
Tips
?
Full load
according
:
to
manufacturer's
recommendation.
?
Do not exceed the maximum fill line.
Overfilling
can cause
early dispensing
?
Part load
?
Minimum load
:
3/4 of the normal amount.
:
1/2 of full load.
of the fabric softener which could stain
clothes.
?
?
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
Softener will
during
?
the
2
days.
be added
automatically
last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
Do not pour fabric softener
directly on the clothes
Detergent is flushed from the dispenser
at the beginning of the cycle.
unction
F
Recommended
Program
Fabric
to the
according
courses
Maximum Load
Proper
Temp.
Type
laundry is
machine washable. (white
laundry type
Option
WD-1439(0~9)SD WD-1439(0~9)NDWD-1439(0~9)TD
WD-1239(0~9)SD WD-1239(0~9)NDWD-1239(0~9)TD
WD-1039(0~9)SD WD-1039(0~9)NDWD-1039(0~9)TD
First check if
95˚C
Medic Care Rinse
cotton, linen towel and
Intensive
sheets...)
Cotton
Cotton
Quick
Pre Wash
Color fast gaments
(shirts,
night dresses, pajamas...)and
lightly soiled white
cotton(underwear...)
Cotton which is
lightly
Crease Care
Quick 30
Polyamide, Acryic,
Polyester
(Cold, 30˚C,
40°C)
-
Colored
lightly
Laundry
(Cold, 30˚C,
60°C)
which
soiled fast.
Hand Wash "Hand Wash" marked
laundry or machine
/ Wool
30˚C
(Cold,
40°C
Bio Care
Baby
Care
Boiling
laundry easily
damaged (silk, curtains...)
for bedcover
)
For elimination of remnant
Care
detergent
Bulky
Thick
boiling
kg
kg
Less than
30˚C
1.0
(Cold, 40°C )
30˚C
kg
Less than
(Cold, 40°C )
(95°C)
for infant
after
1.0
1.0
Medic Care Rinse
Intensive
Crease Care
60˚C
stains
Laundry
1.5
Less than
2.0
kg
Less than
Less than
3.0
kg
Less than
-
60˚C(95°C)
For elimination of
protein
Less than
1.5
kg
Less than
1.5
kg
2.0
kg
Less than
2.0
kg
Intensive
Delicate
Only
Medic Care Rinse
Intensive
Pre Wash
Crease Care
Less than
washable woolens
Bedcover
Rating
soiled
is
Delicate
Rating
60˚C
40˚C
Synthetic
Rating
wash
laundry absorbing
much water(Jumper)
Intensive
(60°C)
Pre Wash
Crease Care
95˚C
(Cold)
1.5
kg
Less than
2.0
kg
Rating
Rating
Rating
Rating
Rating
Rating
Less than
Less than
Less than
Medic Care Rinse
95˚C
30˚C
kg
Less than
Intensive
3.0
kg
4.0
kg
6.0
kg
Rating
Rating
Rating
Rating
Rating
Rating
Medic Care Rinse : For high effectiveness or more purity in rinse operation you can choose Medic Care Rinse option.
Pre Wash : If the laundry is heavily soiled, "Pre Wash" Course is recommended.
Intensive : When washing heavily soiled laundry you can increase effectiveness by choosing "Intensive" option.
Crease Care : If you want to prevent crease, select Crease Care button.
Program setting with "Intensive" option for test in accordance or in conformity with
13
EN60456 and IEC 60456.
H
washer
ow to use
1. Cotton
selected upon power
?
Press the
?
Press the
?
Initial conditions
-
-
2. Manual
automatically
Power(
)
Wash
:
main wash
Rinse
:
3 times
on.
button to start.
Start/Pause(
)
button.
?
1200 rpm
[WD-1239(0~9)SD/1239(0~9)ND/1239(0~9)TD]
1400 rpm
[WD-1439(0~9)SD/1439(0~9)ND/1439(0~9)TD]
Program : Cotton
14
:
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
refer to
[WD-1039(0~9)SD/1039(0~9)ND/1039(0~9)TD]
-
?
Press the
each button.
For selecting the each
1000 rpm
Water temperature
?
pressing
-Spin:
-
Selecting
60˚C
conditions, please
the page15~page20
Press the
Start/Pause(
) button.
ow
H
to
use
washer
10
6
(1)
(2)
(3)
(4)
Dial
:
Program
Button
:
Start / Pause
Button
:
Button
:
Spin
Temp.
(5)
(6)
(7)
(8)
Button
:
Power
Button
:
Medic Care Rinse
Button
:
Pre Wash
Button
:
Intensive
(9) Button : Crease Care
(10) Child Lock
(11) Button : Time Delay
Option
?
By pressing the Option
button, all Option
functions may be
selected.
3. Intensive
?
?
If the
laundry is heavily soiled "Intensive"
option is effective.
By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
1. Medic Care Rinse
?
4. Crease Care
high effectiveness or more purity in
rinse operation you can choose Medic
Care Rinse option.
For
?
If you want to prevent crease, select this
button with spin speed.
2. Pre Wash
?
If the
laundry
course
The
is
heavily soiled,
"Pre Wash"
is effective.
required lamp
will light up for identification.
15
H
ow to use
washer
Spin
?
[WD-1039(0~9)SD/
WD-1039(0~9)ND/
WD-1039(0~9)TD]
1.
?
?
[WD-1239(0~9)SD/
WD-1239(0~9)ND/
WD-1239(0~9)TD]
Spin Speed
the program
as
2. No
according
to
?
follows.
If No
after
WD-1039(0~9)SD/1039(0~9)ND/1039(0~9)TD
-
selecting the spin course,
spin speed can be chosen by
pressing the spin button.
the
[WD-1439(0~9)SD/
WD-1439(0~9)ND/
WD-1439(0~9)TD]
Spin selection
is available
After
Cotton, Rinse+Spin, Quick 30, Bio Care, Bulky
spin
spin is selected,
draining water.
The
required lamp
identification.
will
the washer
stops
light up for
RinseHold-NoSpin-400-800-1000
-
Delicate, Bedcover, Baby Care, Boiling Care,
Cotton Quick, Synthetic, Hand Wash/Wool
RinseHold-NoSpin-400-800
-
?
?
Spin
NoSpin-400-800-1000
Quick 30, Bio Care,
Cotton, Rinse+Spin,
Delicate, Bedcover, Baby Care, Boiling Care,
Cotton Quick, Synthetic, Hand Wash/Wool
RinseHold-NoSpin-400-800
-
Spin
NoSpin-400-800-1200
WD-1439(0~9)SD/1439(0~9)ND/1439(0~9)TD
-
Cotton, Rinse+Spin, Quick 30, Bio Care, Bulky
RinseHold-NoSpin-400-1000-1400
-
Delicate, Bedcover, Baby Care, Boiling Care,
Cotton Quick, Synthetic, Hand Wash/Wool
Rinse Hold
-
-
No
Spin
-
400
-
Spin
NoSpin-400-1000-1400
16
1000
button
repeatedly
by pressing
the
this function
leaves clothes in the machine;
suspended in the water after a rinse
without
Bulky
RinseHold-NoSpin-400-800-1200
-
Rinse Hold is selected
spin
WD-1239(0~9)SD/1239(0~9)ND/1239(0~9)TD
-
?
3. Rinse Hold
entering
into
To
proceed through
The
will
?
spin.
to
drain
spin,
once the rinse hold function is completed
using to Program dial and Spin button to
the required program.
(Spin)
required lamp
identification.
a
or
light up for
ow to use
H
Water
?
Child Lock
Temp.
By pressing the
Temp. button, the
water
temperature
be selected.
can
-
washer
Cold
-30˚C/40˚C/60˚C/
95˚C
If you choose to lock the buttons on the control assembly
to prevent tampering this function may be selected.
1. Child Lock
?
?
Water
temperature
according
can
be selected
required temperature lamp
for identification.
For the
more
refer to
the page13.
detailed
will
be set
can
by pressing
the Medic
Care Rinse button and Pre Wash button
simultaneously. (About three seconds)
to the program.
The
Child Lock
light up
information, please
?
When child lock is set, all buttons
except for power button.
?
To deactivate Child Lock
are
locked
system, press
Medic Care Rinse and Pre Wash buttons
simultaneously again. (About
?
To
change
three
seconds)
to the desired program, whilst in
child lock mode.
1. Press both Medic Care Rinse and Pre Wash
together once again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
?
The child lock
it is
can
automatically
operational errors
be set at any time and
canceled when
occur.
works when power is off.
Also Child Lock
17
H
to
ow
Time
1. Time
washer
use
Program
Delay
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
Load laundry and close the door.
Place the detergent and fabric softener
-
-
?
-
in the drawer.
?
?
How to set "Time
-
will
light
Program dial to select
the program you require.
Press Time Delay button and set
up to indicate selected
the
1. Program
When Start/Pause button is
Press the Start/Pause button.
pressed,
the Cotton program is automatically
(":" blinks.)
selected.
-
If Time
is
?
button is
Delay
displayed. The
"3:00"
pressed,
maximum delayed
time
is 19 hours and the minimum time is
3 hours.
-
By turning the Program dial, the
program is selected in order of
Cotton
Cotton Quick
Synthetic
"
--
Bedcover
--
Bulky
Rinse+Spin Spin
--
--
--
?
Each
on
of the button advances
pressing
time delay by
one
hour.
Wash/Wool
--
?
To cancel the time
delay,
press the
Power button.
?
?
to
Turn the
desired time.
?
Lamp
according
program.
Press Power button.
-
-
Delay"
13 programs are available
the laundry type.
Time
'expected time' from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
Delay
According
is
to the condition
of water supply
and temperature, the delayed time and the
actual washing time may vary.
18
--
Quick 30
--
Delicate
Bio Care
--
--
--
--
Hand
Boiling Care
Baby Care".
Regarding to the laundry type for each
program Please refer to the page13.
ow to use
H
washer
Start/Pause
Power
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
Press the Power button to turn power
and off
?
To cancel the Time
cycle.
power button
2. Pause
?
?
?
If
2. Initial
of wash
is
temporary stop
cycle
needed, press the Start/Pause button.
?
or
at the end of the wash
the
Program
When the Power button is
washer is
the
pressed,
for Cotton program.
And the other initial conditions as
When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected,
Delay function,
should be pressed.
on
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD-1039(0~9)SD/1039(0~9)ND/1039(0~9)TD]
-
Cotton
Program / Main wash
/
Normal Rinse / 1000 rpm / 60˚C
[WD-1239(0~9)SD/1239(0~9)ND/1239(0~9)TD]
-
Cotton
Program / Main wash
/
Normal Rinse / 1200 rpm / 60˚C
[WD-1439(0~9)SD/1439(0~9)ND/1439(0~9)TD]
-
Cotton
Program / Main wash
/
Normal Rinse / 1400 rpm / 60˚C
19
H
washer
ow to use
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1.
?
Special
display
When child lock is selected, the
is displayed.
4. Time left
During washing cycle,
time is displayed.
?
Recommended program
When time
the
delay is selected, it shows
remaining time to finish the selected
-
program.
-
-
2. Self
diagnosis display
-
-
?
If the machine encounters
operation,
displayed.
a
fault
during
the associated fault will be
-
-
-
"
"
:
Water pressure
sensing
"
:
Problem of
overfilling
water
-
"
"
:
Door is not closed
-
"
"
:
Water inlet trouble
-
"
"
:
Drainage
trouble
-
"
"
:
Unbalanced load
-
"
"
:
Water temperature trouble
:
Over load in motor
"
"
"
"
:
by
manufacturer.
Cotton
(95˚C)
:
around 1 hour and 44 minutes
Cotton
(60˚C)
:
around 1 hour and 40 minutes
Cotton Quick
:
around 1 hour and 34 minutes
around 1 hour and 14 minutes
Synthetic :
Quick 30 : around 30 minutes
Rinse+
Spin
:
around 18 minutes
Hand Wash/Wool : around 49 minutes
Delicate : around 50 minutes
Bedcover
Bio Care
around 1 hour and 39 minutes
:
:
Baby Care
around 2 hour and 22 minutes
:
Boiling Care
around 2 hour and 23 minutes
:
around 2 hour and 02 minutes
around 59 minutes
Bulky
:
Spin
around 13 minutes
?
The
?
If
Over load in motor
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
:
washing time may vary by the amount of
laundry, water pressure, water temperature and
other washing conditions.
an
unbalanced load is detected
removing program operates,
or
if the suds
the wash time may
be extended.
(Max. increasing time
20
remaining washing
error
-
"
the
?
"
"
?
function
is 45
minutes.)
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
of the
disposing
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
is clean to
1.
ensure
left in the
smooth
laundry.
running of your
using "Drain" program and then open
whatever any threads or objects.
Be careful when draining if the water is hot.
First drain
Allow the water to cool down before
emptying
objects
or
the lower
opening
Open
cap( )byusinga
cover
the door in
2.
an
cleaning
machine.
the pump filter to
the drain pump,
carrying
out emergency
emergency.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Remove any
At
from the pump filter
cleaning,
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
on
to the floor. When
( )
open to the left.
material
( ).
After
turn the pump filter
this time
use a
vessel to prevent
foreign
coin. Turn the drain
flowing
remove
(
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
2
3
2
21
)
aintenance
M
Dispenser
After
?
?
?
a
while
drawer
detergents
and fabric softeners leave
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
washing
?
replace
the drawer and
continuously
clogs appliances,
build up in
and if it is not
the
washing
If you
run a
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
which should
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
recess
drum
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
use
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
use
methylated spirits, diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
cleaners labeled
deposits using only
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
supply is not adequate in area.
Water supply taps are not completely open.
Water inlet hose(s) are kinked.
The filter of the inlet hose(s) are clogged.
Check another tap in the house.
Drain hose is kinked
Clean and
Water
The drain filter is
clogged.
clogged.
or
Fully open tap.
Straighten hose(s).
Check the filter of the inlet hose.
straighten
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance detection
the drain hose.
Clean the drain filter.
Load is too small.
and correction system. If individual heavy
articles are loaded (ex. bath mat, bath robe,
?
Solution
or
2 similar items to
help
load to allow proper
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
If the laundry is still too wet at the end of the
cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
Close the door.
?
Is the door
opened?
If
"
"
is not released, call for
service.
Unplug
the power
plug
service.
?
Water overfills due to the
faulty
water valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
26
Water level
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
and call for
T
of Warranty
erms
What Is Not Covered:
?
?
?
?
Service
trips
to your home to teach you how to
If the
product
rating plate.
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by factors
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
other than normal domestic
use or use
in
accordance with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
of
product
or
change
by pests for example,
Correcting
or
the set-up of the
product.
rats or cockroaches etc..
vibration that is considered normal for
sound, spin sound,
?
on use
example
water drain
warming beeps.
the installation for
example, levelling
the
product, adjustment of
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
?
?
?
Replace fuses
Incidental
example, grit, nails,
in or correct house
Correction of unauthorized
the owner's manual.
/ substances from the machine,
pump and inlet hose filter for
?
by
wiring
or
correct house
plumbing.
repairs.
or
product
the
bra wires, buttons etc.
consequential damage to personal property
possible defects with this appliance.
If this
including
caused
by
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement of
defective part, shall be borne by the owner.
a
27
Download PDF

advertising