LG | WM-14316FD | LG WM-14316FD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
P/No.:3828ER3038E
LGEUK SERVICE WEB-SITE
:
-
5:30PM
www.lgelectronics.co.uk
WD(M)-14310(5)FD
WD(M)-14311(6)FD
WD(M)-12310(5)FD
WD(M)-12311(6)FD
P
roduct Feature
n
Direct Drive
System
The advanced Brushless DC motor
belt and
n
directly
Water Circulation
Spray detergent
Clothes
are
solution and water onto the load
soaked
more
quickly
and
The
detergent suds can be removed
shower during rinse cycle. The water
water and detergent more efficiently.
n
Internal heater
selected
automatically
cycles.
the
n
circulation
uses
heats the water to the best
can
machines. A
More economical
Wash
wash about 40%
bigger
drum
by Intelligent
System
more
improves
both
temperature
to
change
Wash
load than conventional
the wash
washing
System
time to minimize energy and water
Low noise
speed
control
water level and
consumption.
system
the amount of load and balance, it
to minimize the spinning noise level.
By sensing
performance.
detects the amount of load and water
temperature, and then determines the optimum
n
system
cycle.
water
prevents children from pressing any button
Jumbo drum
LG's jumbo drum
Intelligent
n
over.
wash
settings during operation.
washing
n
and
Child Lock
The Child lock
40%
over
thoroughly during
more easily by the
Built-in Heater
on
n
drives the drum without
pulley.
evenly
distributes load
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
n
C
device (Aqua lock) [WD(M)-14310(5)FD/WD(M)-12310(5)FD]
Aqua lock System is designed for detecting water leak during
operation to prevent water from flooding over the floor.
Safety
ontents
Warnings ............................................................................................................3
Specification ........................................................................................................4
Installation ...........................................................................................................5
Care before
washing .........................................................................................11
Adding detergent...............................................................................................12
Function
How to
..........................................................................................................13
use
washer............................................................................................14
Maintenance......................................................................................................21
2
Troubleshooting guide.......................................................................................24
Terms of Warranty ............................................................................................27
arnings
W
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the
?
?
?
or
store the washer where it will
?
exposed to the weather.
Do not
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
instructions
?
or
published user-repair instructions
?
dry
or
articles that have been
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
that you understand and have the skills to carry
garment manufacturer's wash and
out.
instructions.
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals, etc.
Close supervision is necessary if this
is used
by
or near
?
appliance
?
play
on,
with,
or
inside
or
Never reach into washer while it is
?
The
hang
on
?
moving.
completely stopped.
until the drum has
laundry process
retardant of fabrics.
can
try to
To minimize the
this
possibility of electric shock,
appliance from the power supply or
distribution
crawl inside the washer.
?
or
disconnect the washer at the household
or
the door
Do not slam the washer door closed
unplug
any other appliance.
Do not leave the washer door open.
An open door could entice children to
care
force the door open when locked. This could
result in damage to the washer.
as
children.
Do not allow children to
this
?
using
in, washed in, soaked in,
combustible
recommended in the user-maintenance
?
to persons when
Do not wash
cleaned
Do not
or
injury
washer, follow basic precautions, including the following:
Do not install
be
or
Wait
reduce the flame
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
appliance
must be
of electric shock
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
shock. Check with
a
-
3
pecification
S
n
Name
n
Power
:
Front
:
220-240V~,50Hz
n
Size
:
600mm(W)×645mm(D)×850mm(H)
n
Weight
:
64kg
n
Wash
:
8kg(2100W)
n
Spin speed
supply
capacity/Max.
Watt
:
No
loading washing
machine
spin/400/800/1000/1200
[WD(M)-12310(5)FD/WD(M)-12311(6)FD]
No
spin/400/800/1000/1400
[WD(M)-14310(5)FD/WD(M)-14311(6)FD]
Water
n
consumption
The appearance and
n
4
Accessories
:
64ℓ(8ℓ/Kg)
specifications may
be varied without notice to raise the units
quality.
nstallation
I
Install
or
store where it will not be
exposed
to
temperatures below freezing
or
exposed
to the
weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine
carpeted floor.
In countries where there
vermin,
pay
all times.
particular
are areas
attention to
Any damage which may
appliance guarantee.
be
cause
is installed
on a
which may be subject to infestation by cockroaches or other
keeping the appliance and its surroundings in clean condition at
by
cockroaches
or
other vermin will not be covered
by
the
Transit bolts
n
The
appliance
¥Packing
is fitted with transit bolts to
prevent internal damage during transport.
and all transit bolts must be
removed before
using
the washer.
When
unpacking the base, be sure
to remove the additional packing
support in
packing.
the middle of the base
Removing
n
(Packing support may not
be used depending on
models.)
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
?
If
they
are
along
not
with the rubber
removed, it may
2. Unscrew the 4 bolts with
the spanner
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
use.
bungs.
cause
vibration, noise and malfunction.
3. Take out the 4 bolts
heavy
?
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation
n
place requirement
Level floor
Allowable
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
than
more
one
appliance.
Additional Clearance
:
For wall, door and floor
(10cm
modeling is required.
/2cm:right & left side)
place or store laundry products on top
: rear
Do not
any times.
They
can
damage
the finish
or
of washer at
controls.
Positioning
n
Install the washer
on a
flat hard floor.
Make sure that air circulation around the washer is not impeded by carpets,rug etc.
¥Never try to correct any unevenness in the floor with pieces of wood, cardboard or similar materials under the
washer.
¥If it is impossible to avoid
positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
¥The washer must not be installed in rooms where the temperature can drop below 0¡C.
¥Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
¥With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and
n
clearance of
a
BS
approximately 20mm
is left between the
Plug Safety Details (For
U.K.
top of the washer and the underside of the work-top.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
must be earthed
Yellow(Earth)
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the letter E
or
by the
earth
symbol
or
coloured Green
or
Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N
or
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L
If
a
13 amp
6
(BS 1363) plug
is
used, fit
a
13 amp BS 1362 fuse.
coloured Black.
or
coloured Red.
nstallation
I
n
Electrical connection
1. Do not
3.
extension cord
cord is
5. The
?
?
appliance
must be
or
it must be
4. Connect the machine to
?
double
adapter.
supply
damaged,
replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
use an
2. If the
an
manufacturer
after
so
that the
plug
is
easily
its service
agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen
hoses may burst under pressure. The reliability of the electronic control unit may be impaired at
temperatures below freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the
washing machine at room temperature for a few hours before putting it into operation.
n
Washing
Machine is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
n
Connecting
water
supply
hose
▶Water supply pressure
30kPa and 1000kPa
▶Don't strip
Inlet hose
▶If the
or
to
water
1000kPa,
a
must
be between
2
(0.3~10kgf/cm)
crossthread when
connecting
the valve.
supply pressure is more than
decompression device should be
installed.
?
Two rubber seals are supplied with the
water inlet hoses these are in order to
prevent
?
water leaks.
Check water tightness of washing
machine connections by turning the
completely
?
tap
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
Make sure that there is no kink
hose and that it is not crushed.
▶When your washer has
the
valves,
?
The Inlet hose which has red connector is
for the hot water tap.
?
If the washer has two valves, the energy
is saved by using hot valve.
Hose connector
Rubber seal
[WD(M)-14310(5)FD/WD(M)-12310(5)FD]
two
on
7
nstallation
I
n
Normal
Tap without
1. Unscrew the fixing
attach the
screw
thread &
screw
2. Push the
to
rubber
tap.
connector up till the
packing
with the
type inlet hose
3. Push the
water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
is in
tap. Then
tight contact
tighten the 4
screws.
n
Normal
Tap without
1. Untighten the upper
thread &
connector
touch
one
2. Push the upper
the rubber
screw.
?
In
case
large
the diameter of the
remove
the
connector up till
packing
contact with the
tighten
the 4
type inlet hose
is in
3. Connect the
water
to the middle
tight
tap. Then
pushing
the
supply
hose
connector,
plate
down.
screws.
tap is
guide plate.
?
Turn the middle connector not
to have water leaked.
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
separate the
water
supply
hose from the middle connector
shut off the
inlet hose
plate
?
tap. Then pull the
down, pushing the
down.
Your machine
comes
with
only
cold water connection.
?
Make
sure
that there
are no
kinks in the hose and that it is
not crushed.
8
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
Turn off the
stopcock if the machine is to be left for any length of time (e.g. holiday),
especially if there is no floor drain(gully) in the immediate vicinity.
When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is a risk
of suffocation ! Keep all packaging well away from children
n
Installation of drain hose
?
When
installing the drain hose sink,
it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
secure
?
?
The drain hose should not be
than 100
?
cm
Proper securing of the
damage
the floor from
?
placed higher
above the floor.
drain hose will
due to water
When the drain hose is too
long,
back into the washer. This will
protect
leakage.
do not force
cause
abnormal
noise.
9
nstallation
I
Level
n
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
Timber
NOTE
on a
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
2. If the floor is uneven,
insert
pieces
Make
sure
preferably
in
a
room.
may contribute to
errors.
adjust the adjustable
feet)
feet
as
required. (do
not
of wood etc. under the
that all four feet
are stable and resting on the floor and
appliance is perfectly level. (use a spirit level)
After the washer is level, tighten the lock nuts up towards of the base of
the washer. All lock nuts must be tightened.
then check that the
※
In the
NOTE
case
platform,
that the
washing machine is installed
securely fastened in order
risk that it might fall off.
on a
raised
it must be
to eliminate the
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
n
The installation surface must be clean,
?
Install washer
?
on a
Tile floors (Slippery
n
Position each foot
?
and level.
dry
flat hard floor.
on
sections and stick the
floors)
the Tread Mate and level the machine to suit.
pieces
on
to the
dry
Tread Mate is a self adhesive material used
※
Wooden floors
n
?
Wooden floors
?
To
If
on
ladders &
steps that prevents slipping.
(Suspended floors)
particularly susceptible to vibration.
prevent vibration we recommend you place rubber cups under
possible
washer, secured
install the washer in
one
of the
Rubber
Insert the rubber cups to reduce vibration.
※
You
obtain the rubber cups
Cup
each foot,
to at least 2 floor beams with
corners
※
can
Mate into 70x70
are
at least 15mm thick under the
?
(Cut Tread
placed.)
tile where machine is to be
screws.
of the room, where the floor is
(p/no.4620ER4002B) from the
more
LG spares
stable.
dept.
Important!
and
?
Proper placement
?
The washer must be
?
?
?
It must not "Seesaw"
levelling of the washer ensure long,regular and
absolutely horizontal and stand firmly in position.
across corners
reliable
operation.
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
10
mm
C
n
Before the first
Select
washing
washing
cycle (COTTON 60°C,
clothing.
a
without
This will
n
before
are
Caring
remove
add
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
before
during manufacturing.
washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
temperature and spin speed and different fabrics need to be washed in different ways.
Water
Always
transfer
sort dark colors from
soiled items with
Soil
3.
pale colors
causing discoloration
lightly soiled one.
can occur
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
and whites. Wash
Color
Separate
Separate
Lint
Wash lint
Caring
n
before
clothes
to amount of soil.
according
white fabrics from colored fabrics.
producers
separately.
and lint collectors
loading
Combine large and small items in
than half the total wash load.
Do not wash
separately as dye and lint
possible, do not wash heavily
of white etc. If
single
a
items. This may
load. Load
cause an
large
items first.
out-of-balance load. Add
?
Check all
that
items should not be
Large
one or
pockets
two similar items.
to make sure
they
empty. Items such
nails, hair clip, matches, pens,
are
coins and
keys
more
can
damage
as
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hooks and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
A
n
dding detergent
Adding detergent
1. The
Dispenser
and fabric softener
3.
Drawer
?
Detergent dosage
The
detergent should be used according to
of the detergent manufacture.
the
instruction
?
If too
much
detergent is
recommended amount,
occur
heavy
malfunction)
Use powder
loading
?
Main wash
only
U
?
?PreWash+MainWashU
more
and this will decrease the
or cause
?
used
load
to
the
than the
suds
too many
can
washing result
(Causing a
motor.
detergent only for the front
washer.
Detergent usage may
need to be
for water
water
temperature,
adjusted
hardness,
size and soil level of the load. For best
2.
Adding
results, avoid oversudsing.
Fabric Softener
Tips
Full load
according
:
to
manufacturer's recommendation.
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
the last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
on the cloths
directly
12
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
3/4 of the normal amount.
early dispensing
of the fabric softener which could stain
?
:
Minimum load
at
unction
F
n
Recommended
Fabric
Program
according
courses
Color fast
Cotton-Eco
Option
60˚C
garments
is the
Laundry type
same
laundry type
Proper
Temp.
(Option)
Type
(shirts, night dresses,
pajamas...)and lightly soiled
white cotton (underwear...)
Cotton
to the
in Cotton.
Synthetic Polyamide, Acrylic,
Polyester.
Time
Maximum
Load
in
Minutes
Soak
(Cold,
30˚C, 40˚C,
Pre Wash
Rating
113
Rating
123
4.0kg
75
3.0kg
65
2.0kg
55
2.0kg
50
5.0kg
30
Rinse+Spin
Spin Only
95˚C)
60˚C
Bio
(40˚C)
Intensive
40˚C
Soak
Bio
Pre Wash
(Cold,
30˚C,60˚C)
Rinse+Spin
Spin Only
Intensive
Delicate laundry easily
damaged.
Delicate
Wool/Silk
Machine washable woolens
with pure
wool
new
Hand
"Hand Wash" marked
delicate and wool
Cold
laundry.
Landry which
lightely soiled fast.
(30˚C,40˚C)
Cotton
bedding
with
cover
with
Temperature
filling,
light filling.
:
If the
:
Program setting
Pre Wash
:
laundry
is
follow
heavily
with "Intensive"
If the
Intensive
Rinse+Spin
Spin Only
Cold
(30˚C, 40˚C)
Intensive
1
king size
(9 Tog)
60
Select the water
Always
Intensive
Rinse+Spin
Spin Only
30˚C
(Cold, 40˚C)
duvet, pillow, blanket, sofa
Water
Intensive
Colored
is
Duvet
Rinse+Spin
Spin Only
30˚C
(Cold, 40˚C)
only.
Wash
Quick 30
30˚C
(Cold, 40˚C)
laundry
is
temperature to the wash cycles.
garment manufacture's care label or instructions when laundering.
soiled "Intensive"
option
option
is effective.
for test in accordance
or
in
conformity with
EN60456 and IEC60456.
heavily soiled, "Pre Wash" Cotton is recommended. Pre Wash is available in
Cotton, Cotton-Eco and Synthetic Program.
Bio
:
If you want to eliminate protein stains
the option button.
(milk, blood, chocolate...),
you may select Bio function
by
pressing
13
H
ow to use
1. Cotton
washer
2. Manual
automatically
selected upon power
?
Press the
Power(
?
Press the
Start/Pause(
?
Initial condition
-
Wash
:
Main wash
-
Rinse
:
3 times
)
on.
button to start.
)
button.
[WD(M)-14310(5)FD/WD(M)-14311(6)FD]
1400 rpm
[WD(M)-12310(5)FD/WD(M)-12311(6)FD]
1200 rpm
-
-
Water
temperature
Program
14
:
Cotton
?
Press the
?
Select the conditions which you want to
use, by pressing each button.
:
60˚C
Power(
)
button to start.
selecting the each conditions, please
refer to the page15~page20
For
?
-Spin:
Selecting
Press the Start/Pause button.
ow to use
H
(1)
(1)
(2)
(3)
(4)
Button
Dial
:
:
washer
(2)
Power
Program
Button
:
Start/Pause
Button
:
Option
(3)
(5)
(6)
(7)
(8)
(4) (5) (6)
(7)
Child lock
Button
:
Rinse
Button
:
Button
:
Spin
Temperature
(8)
(9) (10)
(11)
(9) Button : Beeper
(10) Button : Intensive
(11) Button : Time Delay
Power
Program
1. Power
?
Press the
Power(
)
button to turn power
?
(Program)
on
and off.
?
To cancel the Time
Power(
)
button
2. Initial
Delay function, the
should be pressed.
9 programs
Program
-
Cotton
-
Cotton-Eco
-
-
?
When the
washer is
Power( ) button is pressed, the
ready for Cotton program. And the
other initial conditions
?
as
follows.
So, if you want to advance into the washing
cycle without changing the program, just press
Start/Pause( ) button and then the washer
will
proceed.
available
according
-
-
/ Main Wash /
Normal Rinse / 1400 rpm / 60˚C
to the
Synthetic
Delicate
Hand Wash
Quick 30
-
Duvet
-
Drain
Wool/Silk
?
Lamp
will
?
When
Start/Pause( ) button is pressed,
automatically selected.
light
up to indicate selected program.
the
Cotton program is
By turning
the
Program dial,
selected in order of "Cotton
[WD(M)-14310(5)FD/WD(M)-14311(6)FD]
Program
-
-
Initial program
-Cotton
are
laundry type.
Synthetic
Quick 30
-
-
Delicate
Duvet
-
-
the program is
Cotton-Eco
-
Wool/Silk
-
-
Hand Wash
Drain".
Regarding to the laundry type for each program
Please refer to the page13.
[WD(M)-12310(5)FD/WD(M)-12311(6)FD]
-Cotton Program / Main Wash /
Normal Rinse / 1200 rpm / 60˚C
15
ow to use
H
washer
Start/Pause
Option
By pressing
the
button, only
one
?
option
option
function be selected.
1. Start
?
This Start/Pause button is used to start
wash
cycle
pause the wash
or
cycle.
2. Pause
?
?
If
temporary stop of wash cycle is needed,
?
If you want to eliminate
protein stains(milk,
press "Start/Pause" button.
blood, chocolate...), you may select Bio
When in
function
Pause, the power is turned off
automatically
?
1. Bio
[You
after 4 minutes.
at the end of the wash
cycle.
the
option
button.
select Bio function when
temperature is higher than 60˚C in Cotton,
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
by pressing
can
Cotton-Eco and
Synthetic.]
2. Soak
Use this mode to wash normal clothes
?
and
?
heavy
clothes which
are
or
thick
excessively dirty.
Available in Cotton, Cotton-Eco and
Synthetic.
3. Pre Wash
?
Use this
option
for load that need
pretreatment. Add
16 minutes pre wash and
drain.
-
When
using Pre Wash option, do not use
liquid detergent in the main wash
comportment. Use powder for the main
wash.
?
Available in Cotton, Cotton-Eco and
Synthetic.
4.
?
Use this
5.
?
16
Rinse+Spin
option
to rinse and then
spin.
Spin Only
When you want
option.
spin only,
select the this
H
washer
ow to use
Child lock
Rinse
?
By pressing
the Rinse
button, the Rinse type
can
be selected.
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
-
Normal
-
Rinse +
-
Rinse ++
-
Normal+Hold
-
Rinse + +Hold
1. Child lock
1. Normal
?
Child lock
by pressing and holding the
and
Rinse
button
Option
simultaneously.
(About three seconds)
can
be set
?
Cotton / Cotton-Eco / Synthetic performs 3
Rinses
?
Wool/Silk / Hand Wash
/Quick 30 / Delicate /
Duvet performs 2 Rinses
?
When child lock is set, all buttons
?
To deactivate Child lock
are
inoperable.
2. Rinse + & Rinse ++
?
system, press and hold the
Option and Rinse button simultaneously again.
(About three seconds)
Used to additional
in
?
removing
By selecting
rinse, which may assist
traces of
Rinse
+
detergent
or
Rinse
++
residue.
function,
the Rinse Time and the Rinse water
are
increased.
3. Rinse Hold
?
To
change to the
desired program, whilst in child
lock mode.
1. Press and hold both
Option
?
by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
?
To
and Rinse button
together once again.
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
Is selected
proceed through
to a drain or
program dial scroll to
The required lamp
identification.
?
spin, once
completed using to
the required program.
the rinse hold function is
will
light up for
The child lock
can be set at any time and it is
canceled when operational errors
Also Child lock works when power is off.
automatically
occur.
17
H
ow to use
Time
washer
Spin
Delay
?
2
By pressing the
Spin button, the
spin speed can
be chosen.
1. Time
Delay
[WD(M)-14310(5)FD/
WD(M)-14311(6)FD]
Preparing washing before starting
Turn on the water tap.
"Time
Delay"
Spin only
-
-
-
laundry and close the door.
Place the detergent and fabric softener
1. Press the Power button.
Load
2. Set the desired
in
spin
the drawer.
?
-
-
Delay"
Power( ) button.
Turn the Program dial to select
the program you require.
Press Time Delay button and set
Press the
"
("
?
the
1.
Spin selection
Press
?
the
)
button.
Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
according
to the program
Cotton & Cotton-Eco & Quick 30
No Spin-400-800-1000-1400
-
If Time
is available
follows.
[WD(M)-14310(5)FD/WD(M)-14311(6)FD]
-
Start/Pause(
lamp is on)
Spin speed
as
desired time.
-
spin speed by pressing
button.
3. Press the Start/Pause button.
How to set "Time
-
[WD(M)-12310(5)FD/
WD(M)-12311(6)FD]
-
Synthetic & Wool/Silk
No Spin-400-800-1000
& Hand Wash & Duvet
Delicate
No Spin-400-800
19:00 hours and the minimum time is 3:00
[WD(M)-12310(5)FD/WD(M)-12311(6)FD]
hours.
-
?
Each
pressing of the
delay by one hour.
button advances time
No Spin-400-800-1000-1200
-
?
To cancel the time
Power(
?
Time
or
?
the
button.
)
is
-
Synthetic & Wool/Silk
No Spin-400-800-1000
Delicate
to the
selected
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
may vary.
2. No
?
spin
If "No
after
Spin" is selected,
draining water.
The required lamp
identification.
18
& Hand Wash & Duvet
No Spin-400-800
time' from the
'expected
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
delay, press
Cotton & Cotton-Eco & Quick 30
will
the washer
light up for
stops
H
ow to use
Water
?
washer
Intensive
Temp.
By pressing
the
Temp.
button, the water
temperature can be
Intensive
selected.
?
-
Cold
-30˚C/40˚C/60˚C/95˚C
?
If the
laundry is heavily
option is effective.
By selecting
the Intensive
time may be extended,
program selected.
?
1. Water
?
-
Temperature
Water
temperature
below
according
can
be selected
option, the wash
depending on the
this option press the Intensive button
before the wash program is started.
use
once
as
to the program.
Beeper
Cotton-Eco
40˚C-60˚C
-
To
soiled "Intenive"
?
Cotton
Press
repeatedly
the volume of the
to
adjust
Beeper.
Cold-30˚C-40˚C-60˚C-95˚C
-
Synthetic
Cold-30˚C-40˚C-60˚C
-
Delicate & Wool/Silk & Quick 30 &
Hand Wash & Duvet
Cold-30˚C-40˚C
The required temperature lamp
identification.
For the
more
will
light up for
detailed information, please
refer
to the page13.
19
H
washer
ow to use
Display
3.
?
Completion of washing
When
washing cycle is completed,
is displayed on the "Multi display".
"
1.
?
Special function display
When Child lock is selected, the
lamp is on.
"
?
4. Time left
?
"
During washing cycle,
displayed.
delay is selected, it shows
remaining times to finish the selected
?
Recommended program
-
program.
-
-
2. Self
diagnose display
-
-
?
If the washer encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
fault
during
-
the associated fault will be
-
:
Water pressure
:
Problem of
sensing
-
error
-
overfilling
water
:
Door is not closed
:
Over load in motor
:
Over load in motor
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water
"
:
remaining washing
Cotton
by
manufacturer.
around 1 hour and 53 minutes
:
Cotton-Eco
around 2 hours and 3 minutes
:
around 1 hour and 15 minutes
Synthetic
:
Delicate
around 1 hour 5 minutes
:
Wool/Silk
:
around 55 minutes
Hand Wash
Quick 30
Duvet
:
:
:
around 50 minutes
around 30 minutes
around 1 hour
Drain: around 1 minute
The
washing time may vary by the amount
laundry, water pressure, water
temperature and other washing conditions.
?
"
"
a
the
time is
When time
the
"
of
If
?
an
suds
unbalanced load is detected
or
if the
program operates, the wash
time may be extended.
(Max. increasing time is 45 minutes.)
trouble
removing
Door Lock
temperature trouble
Water leaks
[WD(M)-14310(5)FD/WD(M)-12310(5)FD]
If these error letters are displayed, please
refer to the troubleshooting page26 and
follow the guide.
?
Lights
whenever the door of the washer is
locked.
?
The door
can
be unlocked
Start/Pause button to
?
20
The door
can
be
stop
opened
by pressing
the
the washer.
after
a
short
delay.
aintenance
M
Before
the washer
cleaning
interior, unplug the electrical power cord
to avoid electrical shock to
avoid electrical shock hazards.
When
disposing of the appliance, cut off the mains cable,
prevent young children being trapped inside.
and
destroy the plug
Disable the door
lock to
n
The water inlet filter
"
-"
message will blink
error
detergent
If your water is very hard
-
on
the control
panel
when water does not enter the
drawer.
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten up
the inlet
a
hard bristle
hose.
brush.
n
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the filter
CAUTION
First drain
is clean to
using
objects
ensure
left in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever any threads
or
remove
objects.
Be careful when
Allow the water to cool
emptying
1.
Open
or
the lower
opening
cover
( ) by using a
coin. Drain plug ( )
cap
to
pull
out the hose.
draining if the water is hot.
down before cleaning the drain pump, carrying
the door in
2.
an
Unplug the drain plug ( ),
allowing the water to flow out.
this time
water
use a
flowing
vessel to
on
3. Remove out any
At
prevent
to the floor. When
cleaning,
material
After
( )
clockwise and insert the drain
)to the original place.
plug (
close the lower
( )
( ).
turn the pump filter
the pump filter
open to the left.
foreign
from the pump filter
water does not flow any more, turn
cover
cap.
2
100
1
out emergency
emergency.
2
3
3
21
aintenance
M
Dispenser drawer
n
After
a
while
detergents
and fabric softeners leave
?
It should be cleaned from time to time with
?
If necessary it
can
be removed
a
deposit
in the drawer.
a jet of running water.
completely from the machine by pressing
?
by pulling it out.
cleaning, the upper part
the catch
downward and
To facilitate
The drawer
n
Detergent
can
be cleaned
?
n
?
also accumulate inside the
The
washing
If you live in
seen
with
occasionally
without
cycle
a
compartment
can
be removed.
recess
Once you have finished
rinse
of the fabric softener
recess
old toothbrush.
an
cleaning, replace
the drawer and
run a
laundry.
drum
hard water area, limescale may
and thus not
which should
easily
continuously
build up in
places
where it cannot be
removed.
Over time the build up of scale
clogs appliances,
and if it is not
kept
in check these may have to be
replaced.
?
Although the washing drum is made of Stainless steel, specks of rust
articles (paper clips, safety pins) which have been left in the drum.
?
The
?
If you
washing
use
can
be caused
descaling agents, dyes
or
bleaches, make
Descaler may contain chemicals that may
Remove any
22
use
small metal
drum should be cleaned from time to time.
sure
they
are
suitable for
washing
use.
Never
by
spots with
steel wool.
a
stainless steel
damage part of your washing
cleaning agent.
machine.
machine
aintenance
M
The water circulation nozzle
n
Clean the water circulation
?
n
nozzle, if clogged.
Cleaning your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and a neutral non abrasive
detergent.
off any
Immediately wipe
Try
warm
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
cloth.
damp
sharp objects.
methylated spirits,
use
diluents
or
similar
products.
2. Interior
Dry
around the washer door
Run washer
through
n
opening, flexible gasket and
complete cycle using hot water.
Remove hard water
machine.
Winterizing
deposits using only
an area
4. Add
as
safe for
washing
where
freezing may occur or moved in freezing
prevent damage to the washer:
supply tap.
2. Disconnect hoses from water
Plug
cleaners labeled
follow these instructions to
1. Turn off water
3.
glass.
instructions
If the washer is stored in
temperatures,
door
if necessary.
Repeat process
NOTE
a
electrical cord into
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
of nontoxic recreational
electrical outlet.
vehicle(RV)
antifreeze into
an
empty wash drum.
Close the door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power
7. Remove
dispenser drawer,
8. Store washer in
9. To
remove
through
a
cord, dry
an
for 1minute to drain out all water.
expelled.
the drum
drain and
dry
interior, and close the door.
excessive water from the
compartments.
upright position.
antifreeze from washer after
storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T
roubleshooting guide
This
washing machine is equipped with automatic safety functions
diagnose faults at an early stage and react appropriately.
When the machine does not function properly or does not function
following points before you contact your service provider.
all, check the
at
Possible Cause
Symptom
Rattling and
clanking noise
which detect and
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorized
service centre.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
Have all the transit bolts and
packing
If not removed
been removed?
Are all the feet
the
If sound continues, washer is
out of balance. Stop and
probably
during
installation, refer to Installation guide
resting firmly
on
for
removing
transit bolts.
Wash load may be
distributed
ground?
in drum.
Stop
unevenly
washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent
detergent may
foaming which
or
cause
unsuitable
excessive
may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another
tap in the house.
area.
?
Water
?
Water inlet
?
The filter of the inlet
supply tap
completely open.
is not
hose(s)
are
Fully
kinked.
hose(s)
are
open tap.
Straighten hose(s).
Check the filter of the inlet
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
or
clogged.
Clean and
straighten
Clean the drain filter.
hose(s).
the drain hose.
roubleshooting guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
Reset circuit breaker
breaker
Do not increase fuse
tripped,or
a
power
outage has occurred.
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
Turn
on
by a qualified electrician.
water supply tap.
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T
roubleshooting guide
Possible Cause
Symptom
?
Water supply is not
in area
?
Water
?
?
Solution
<Fig
adequate
1>
Check another tap in the house.
Fully open tap.
supply taps are not
completely open.
Water inlet hose(s) are
Straighten hose(s).
kinked.
The filter of the inlet
Check the filter of the inlet
hose(s)
clogged.
If water leakage occured in the inlet
hose, indicator " " will be changed red
hose(s).
are
?
color. [WD(M)-14310(5)FD/WD(M)-12310(5)FD]
?
Drain hose is kinked
?
The drain filter is
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
appliance
clogged.
clogged.
has
or
unbalance
an
detection and correction
system. If
Clean and
straighten the drain
hose.
Clean the drain filter.
or
2 similar items to
Rearrange
spinning
help
load to allow proper
individual
heavy articles are loaded (ex.
etc.), this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and repeat
the spin cycle.
bath mat, both robe,
?
?
Is the door
or
not
opend
completely
Close the door
If
"
completely.
"is not released, call for service.
closed?
Unplug the power plug and call for service.
?
Water overfills due to the
faulty water
Close the water tap.
valve.
?
Water level
?
Over load in motor.
?
Over load in motor.
?
Water leaks
sensor
has malfunctioned.
[WD(M)-14310(5)FD/WD(M)-12310(5)FD]
26
Unplug the power
Call for service.
Call for service.
plug.
T
erms
of
Warranty
What Is Not Covered:
?
Service
?
If the
product
rating plate.
?
If the fault is caused
by accident, neglect,
If the fault is caused
by
?
trips
to your home to teach you how to
is connected to any
voltage
use
the
product.
other than that shown
misuse
or
on
the
Act of God.
factors other than normal domestic
use or use
in
accordance with the owner's manual.
?
Provide instruction
?
If the fault is caused
?
Noise
or
on use
by pests
product
for
or
change
example,
rats
vibration that is considered normal for
sound, spin sound,
?
of
Correcting
or
the
or
set-up of the product.
cockroaches etc..
example
water drain
warming beeps.
the installation for
example, levelling
the
of
product, adjustment
drain.
?
?
Normal maintenance which recommended
Removal of
foreign objects
by
the owner's manual.
/ substances from the machine, including the
example, grit, nails, bra wires, buttons etc.
pump and inlet hose filter for
fuses in
correct house
?
Replace
?
Correction of unauthorized
?
Incidental
possible
?
If this
or
or
wiring
or
correct house
plumbing.
repairs.
consequential damage to personal property
appliance.
caused
by
defects with this
product
is used for commercial purpose, it is not warranted.
(Example : Public places
center, dormitory)
such
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
27
a
Download PDF

advertising