LG | WM-14341FD | LG WM-14341FD Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3047W
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-16341(6)FD / WD(M)-16340(5)FD
WD(M)-14341(6)FD / WD(M)-14340(5)FD
WD(M)-12341(6)FD / WD(M)-12340(5)FD
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Features
Jumbo drum
LG's
jumbo
drum
machines. A
can
wash about 40%
bigger drum improves
More economical
more
the wash
load than conventional
washing
performance.
by Intelligent Wash System
System detects the amount of load and water temperature, and
then determines the optimum water level and washing time to minimize energy and
water consumption.
Intelligent
Wash
Child-Lock
The child-lock system is to be used for preventing children from
button to change the program during operation.
Low noise
pressing
any
speed control system
By sensing the amount of
the spinning noise level.
load and balance, it
evenly distributes
load to minimize
Auto Restart
Auto Restart allows the program to restart all
It does from the stage where it stopped.
Direct Drive
by
itself in
case
of power failure.
System
The advanced Brushless DC motor rotates the drum
directly without
belt and
pulley.
Water circulation
Spray detergent solution and water onto the load over and over. Clothes are
soaked more quickly and thoroughly during wash cycle. The detergent suds can be
removed more easily by the water shower during rinse cycle. The water circulation
system uses both water and detergent more efficiently.
C
ontents
Warnings....................................................................................3
Specifications.............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent .....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide .............................................................24
Terms of Warranty ...................................................................27
2
arnings
W
READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
Before installation, check exterior
do not install.
?
Do not install
be
?
?
has,
?
understand and have the skills to carry out.
Keep the area underneath and around your
?
free of combustible materials such
as
?
etc.
Do not leave the washer door open.
An open door could entice children to
or
hang
on
the
The
?
crawl inside the washer.
Never reach into washer while it is moving. Wait
until the drum has completely stopped.
laundry process
can
reduce the flame retardant
To avoid such
a
result, carefully follow the garment
manufacturer's wash and
care
When the machine
or
try to force
runs
high temperature, the front
door may be very hot. Don't touch it.
To minimize the possibility of electric shock, unplug
this appliance from the power supply or disconnect
?
panel by
removing the fuse or switching off the circuit breaker
before attempting any maintenance or cleaning.
When unplugging power cord, do not pull out by
grasping the cord. Otherwise, the power cord may
be damaged.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially disassembled, or
has missing or broken parts, including a damaged
cord or plug.
Before discarding an old machine unplug it. Render
the plug useless. Cut off the cable directly behind
the appliance to prevent misuse.
instructions.
Do not
This
or
the washer at the household distribution
?
any other appliance.
Keep washer away from fire.
Do not wash
the door open when locked. This could result in
damage to the washer.
?
of fabrics.
?
Do not slam the washer door closed
Close supervision is necessary if this appliance is
used by or near children or infirm persons.
Do not allow them to play on, with, or inside this
door
?
?
to the weather.
or
?
using
dry articles that have been cleaned
in, washed in, soaked in, or spotted with
combustible or explosive substances (such as wax,
oil, paint, gasoline, degreasers, dry-cleaning
solvents, kerosene, etc.) which may ignite or
explode.
store the washer where it will
lint, paper, rags, chemicals,
to persons when
?
published user-repair instructions that you
appliances
?
If it
damages.
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance instructions
or
?
exposed
injury
precautions, including the following:
?
or
or
push down the door excessively,
could topple over the washer.
when washer door open.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
This
appliance must be grounded.
In the event of malfunction
or
breakdown, grounding will reduce the risk of electric shock by providing a path
appliance is equipped with a cord having an equipment-grounding conductor and grounding plug.
The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
of least resistance for electric current. This
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper connection
of the equipment-grounding conductor can result in risk of electric shock. Check with
a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded. Do not modify
the plug provided with the appliance if it does not fit the outlet, have a proper outlet installed by a qualified electrician.
-
3
S
pecifications
Name
Power
supply
Size
Weight
/ Max.Watt
:
Front
:
220-240 V~,50 Hz
:
600mm(W)
loading washing
600mm(D)
x
850mm(H)
:65kg/2100W
Wash
capacity
:
Water
consumption
:50
Refer to the
Permissible water pressure
:
0.3-10
Spin speed
:
No
The appearance and
x
machine
Rating
Label
kgf/cm2 (30-1000 kPa)
spin/400/600/800/1000/1200/1400/1600
[WD(M)-16341(6)FD / WD(M)-16340(5)FD]
No spin/400/600/800/1000/1200/1400
[WD(M)-14341(6)FD / WD(M)-14340(5)FD]
No spin/400/600/800/1000/1200
[WD(M)-12341(6)FD / WD(M)-12340(5)FD]
specifications
may be varied without notice to raise the units
Accessories
Spanner
4
quality.
nstallation
I
temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
Install
or
carpeted
store where it will not be
exposed
to
floor.
In countries where there
which may be subject to infestation by cockroaches or other vermin,
attention to keeping the appliance and its surroundings in clean condition at all times.
particular
Any damage which
pay
are areas
may be
cause
by
cockroaches
or
other vermin will not be covered
by
the
appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
(Packing support may not
be used depending on
models.)
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future
remove
the bolts
?
If
they
heavy
along
with the rubber
bungs.
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
use.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
slope under entire washer is 1˚
Allowable
Washer
:
Power outlet
:
Must be within 1.5 meters of either side of location of
washer. Do not overload the outlet with
more
than
one
appliance.
Laundry
Tub
Additional Clearance
approx.
:
For wall, door and floor modeling is
(10cm : rear / 2cm: right & left side)
2cm
Do not
place
or
store
required.
laundry products
on
top of washer
at
any times.
They
can
damage the finish
or
controls.
Positioning
Install the washer
Make
?
?
?
?
flat hard floor.
that air circulation around the washer is not
Never try to correct any
under the washer.
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or similar materials
If it is
impossible to avoid positioning the washer next to a gas cooker or coal burning stove,an
insulating(85x60cm) covered with aluminum foil on the side facing the cooker or stove,must be
inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of
a
?
sure
on a
breakdown.
With the washer installed
adjust all four feet using the transit bolt spanner provided ensuring the
appliance is stable, and a clearance of approximately 20mm is left between the top of the washer and
the underside of the work-top.
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
Green and
appliance
Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
that the
so
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing
Machine is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting water supply
hose
▶Water supply pressure
must
be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
Hose connector
?
Rubber seal
?
in order to
are
supplied
with the water inlet hoses these
water leaks.
prevent
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the hose
if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
Hose connector
Rubber seal
[WD(M)-16340(5)FD/
WD(M)-14340(5)FD/
WD(M)-12340(5)FD]
▶When your washer has two valves.
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
?
?
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
water
till
3. Connect the
water
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
?
?
?
?
?
The drain hose should not be
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
properly prevents
excessive
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
or
suspended type flooring
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
NOTE
a
appliance
washer is level, tighten
may contribute to
feet
as
required. (do
In the
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
not
stable and
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine
(Cut Tread
is to be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups under each foot,
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
least 2 floor beams with
of the
room,
Rubber
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
?
?
?
It must not "Seesaw"
?
The installation surface
?
Do not
10
across corners
under load.
be clean, free from floor wax and other lubricant coatings.
let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
must
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate
Separate
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
by brushing
detergent dissolved
in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
?
max
dosage
The
detergent should be used according to the
instruction of the detergent manufactrurers.
If too much detergent
is used
recommended amount,
occur
too
and this will decrease the
?
or cause
Use powder
loading
?
?
Main wash
only
the
can
washing
motor.
detergent only for the front
washer.
Detergent usage may need to be
adjusted for water temperature, water
hardness, size and soil level of the load.
For best results, avoid oversudsing.
?PreWash+MainWash
2.
than the
many suds
heavy load to
(Causing malfunctions)
result
more
Adding Fabric Softener
Tips
?
(
?
)
MAX
MAX
125 ml
125ml
can cause
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
2
days.
Softener will
automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
3/4 of the normal amount.
?
Part load
?
Minimum load
:
:
1/2 of full load.
early dispensing
clothes.
?
to
recommendation.
of the fabric softener which could stain
?
according
:
manufacturer's
Do not exceed the maximum fill line.
Overfilling
Full load
Do not pour fabric softener
directly on the clothes
?
Detergent is flushed from the dispenser
at the beginning of the cycle.
F
unction
Recommended
courses
according
to the
laundry types
( ) : WD(M)-14341(6)FD / WD(M)-12341(6)FD / WD(M)-14340(5)FD / WD(M)-12340(5)FD
Fabric
Program
Option
Type
First check if
laundry
(white cotton, linen
towel and sheets...)
Cotton
Color fast gaments
(shirts, night dresses,
pajamas...)and lightly
soiled white
laundry easily
damaged
Wool/Silk woolens with pure
new wool or silk only
"Hand Wash" marked
delicate and wool
is
Laundry which
lightly soiled
fast.
30˚C
(40˚C,
Cold)
(40˚C,
Cold)
Cold
(30˚C)
laundry
Quick 30
40˚C,
30˚C
Machine washable
Colored
(30˚C,
(30˚C,
60˚C)
Delicate
Wash
60˚C
40˚C
Polyamide, Acryic,
Synthetic
Polyester
Hand
95˚C
60˚C-Eco)
cotton(underwear...)
Delicate
Load
Temp.
is machine washable.
Intensive
Maximum
Proper
30˚C
Rinse Hold
Intensive
Rinse+
Pre Wash
Crease Care
Rating
Rinse Hold
Intensive
Rinse+
Pre Wash
Crease Care
Rating
Rinse Hold
Intensive
Rinse+
Pre Wash
Crease Care
Rinse Hold
Intensive
Rinse+
Crease Care
Rinse Hold
Intensive
Rinse+
Crease Care
Rinse Hold
Intensive
Rinse+
Crease Care
Rinse Hold
Rinse+
Crease Care
Energy
Time
in
in
kWh
Minutes
2.74
123
(117)
1.10
106
(100)
Less than
3.5
kg
Less than
3.0
kg
Less than
2.0
kg
Less than
2.0
kg
0.45
80
0.41
52
0.28
50
0.03
44
0.35
30
Less than
2.0
kg
If the
laundry is heavily soiled "Intensive" option is effective.
Program setting with "Intensive" option for test in accordance or in conformity with EN60456 and IEC 60456.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
Pre Wash : If the laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is available in Cotton
and Synthetic Program.
:
Crease Care
:
If you want to
prevent
crease, select Crease Care button.
13
ow
H
1. Cotton
to
washer
use
selected upon power
?
?
?
Press the
Press the
2. Manual
automatically
Power(
)
on.
button to start.
Start/Pause(
)
button.
?
?
Initial conditions
-
-
-
-
-
Wash
:
main wash
Rinse
:
3 times
Press the
Power(
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
pressing
each button.
For
selecting the each conditions, please
refer to the page15~page20
Spin : 1600 rpm [WD(M)-16341(6)FD / 16340(5)FD]
1400 rpm [WD(M)-14341(6)FD / 14340(5)FD]
1200 rpm [WD(M)-12341(6)FD / 12340(5)FD]
Water temperature
Selecting
:
?
Press the
Start/Pause(
) button.
60˚C
Program : Cotton
How to select the
Read the
1.
following
language
instructions when you want to
When the power is off, press the time
delay button and power button
2.
change
the
language
Turn the program dial to
select the language.
simultaneously.
3.
The
language is
finally selected by
pressing the spin
button.
14
4. Power will be off
5. Confirm the selected
automatically, after
language after power
changing language.
again.
on
H
(1)
(2)
(3)
(4)
ow
to
use
washer
Dial : Program
Button : Start / Pause
Button
Button
:
:
(5)
(6)
(7)
(8)
Intensive
Rinse Hold
Button
Button
:
Rinse+
:
Pre Wash
Button
Button
:
Crease Care
Child Lock
:
(9) Button : Power
(10) Button : Spin
(11) Button : Time Delay
Option
By pressing the
Option button,
all Option
?
functions may
be selected.
-
Intensive
-
Rinse+
-
Rinse Hold
-
Pre Wash
-
?
?
laundry is heavily
option is effective.
This
Option
soiled "Intensive"
?
the Intensive
option, the wash
extended, depending on the
are
the rinse
increased.
laundry
?
is
heavily soiled,
is effective.
course
Pre Wash is available in Cotton and
Synthetic.
is not available with Quick 30
5. Crease Care
2. Rinse Hold
Is selected
If the
"Pre Wash"
program.
?
By selecting Rinse+ function,
time and the rinse water
time may be
program selected.
?
For additional rinse which may assist in
removing traces of detergent residue.
4. Pre Wash
If the
By selecting
?
Crease Care
1. Intensive
?
3. Rinse+
?
by pressing
If you want to prevent crease, select this
button with spin speed.
the Rinse Hold
button this function leaves clothes in the
machine; suspended in the water after
rinse without
?
To
entering
proceed through
into
a
spin.
The
required lamp
will
light up for identification.
to a drain or
spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
15
ow
H
to
use
washer
Spin(
)
(400--600--800--1000--1200--1400)
(400--600--800--1000--1200)
[WD(M)-12341(6)FD / WD(M)-12340(5)FD]
[WD(M)-14341(6)FD / WD(M)-14340(5)FD]
(400--600--800--1000--1200--1400--1600)
[WD(M)-16341(6)FD / WD(M)-16340(5)FD]
?
the
By pressing
Spin button,
the
spin speed
can
be chosen.
Spin only:
1. Press the Power buton.
2. Set the desired
the
Spin
spin speed by pressing
button.
3. Press the Start/Pause button.
1. Spin selection
?
is available
Spin Speed
the program
?
as
according
to
follows.
WD(M)-16341(6)FD / WD(M)-16340(5)FD
Cotton, Rinse+Spin, Quick 30
NoSpin-400-600-
?
-
800
-
-
-
1000
-
1200- 1400
-
WD(M)-12341(6)FD / WD(M)-12340(5)FD
Cotton, Rinse+Spin, Quick 30
NoSpin-400-600-800-1000-1200
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
-
1600
-
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
Delicate
-
NoSpin-400-600-800
Delicate
NoSpin-400-600-800
?
WD(M)-14341(6)FD / WD(M)-14340(5)FD
Cotton, Rinse+Spin, Quick 30
NoSpin-400-600-
-
800-1000-1200-1400
-
-
Synthetic, Wool/Silk, Hand Wash
NoSpin-400-600-800-1000
Delicate
NoSpin-400-600-800
16
2.Nospin(
?
If
)
spin is selected,
after draining water.
no
the washer stops
H
ow
to
use
Water
washer
Child Lock
Temp.
If you choose to lock
the buttons on the
control
assembly to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
can
be set
by pressing
the
Rinse+ button and Pre Wash button
?
By turning
the
temperature
-
the water
Program Dial,
can
simultaneously. (About
be selected.
three
seconds)
Cold
-30˚C/40˚C/60˚C/95˚C
?
Water temperature can be selected
according to the program.
?
The
required temperature lamp
for identification.
For the
more
refer to
the
detailed
will
light up
?
information, please
When child lock is set, all buttons
except for power button.
?
locked
To deactivate Child Lock system, press
Rinse+ and Pre Wash buttons
simultaneously again. (About
page13.
are
To
change
three
seconds)
to the desired program, whilst
in child lock mode.
1. Press both Rinse+ and Pre Wash
once
together
again. (About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
?
again.
The child lock can be set at any time and
it is automatically canceled when
operational errors occur. Also Child Lock
works when power is off.
17
H
to
ow
use
washer
TimeDelay(
1. Time
Program
)
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
-
-
-
Load
laundry and close the door.
Place the detergent and fabric softener
?
?
How to set "Time
-
-
Delay"
Turn the
Program dial to select
the program you require.
Press Time Delay button and set
?
the
?
Press the Start/Pause button.
If Time
is
?
Delay button is pressed, "3:00"
displayed. The maximum delayed time
?
?
will
When Start/Pause button is
pressed,
the Cotton program is automatically
-
By turning the Program dial, the
program is selected in order of
Cotton
Delicate
Quick 30
"
-
-
3 hours.
Wool/Silk
Each
pressing of the button
time delay by one hour.
To cancel the time
Time
delay,
advances
press the
'expected time' from the
present to the completion of washing
cycle or selected process (Wash, Rinse,
Spin).
Delay
According to
is
the condition
of water supply
delayed time and the
and temperature, the
actual washing time may vary.
18
to the
up to indicate selected
light
Rinse+Spin
Power button.
?
Lamp
is 19 hours and the minimum time is
on
according
selected.
desired time.
-
available
program.
Press Power button.
-
are
laundry type.
in the drawer.
?
8 programs
Regarding to
-
-
-
Hand Wash
Synthetic".
the
program Please
Drain
-
laundry type for each
refer to the page13.
-
ow
H
to
use
washer
Power
Start/Pause
1. Start
?
1. Power
This Start/Pause button is used to start
wash
cycle
or
pause the wash
?
cycle.
?
2. Pause
?
?
?
Press the Power button to turn power
and off
To cancel the Time
power button
on
the
Delay function,
should be pressed.
If
temporary stop of wash cycle is
needed, press the Start/Pause button.
When in Pause, the power is turned off
automatically after 4 minutes.
2. Initial Program
?
at the end of the wash
cycle.
the
pressed,
for Cotton program.
And the other initial conditions as
washer is
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
When the Power button is
ready
follows.
?
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
3. Door Lock
Initial program
[WD(M)-16341(6)FD / WD(M)-16340(5)FD]
?
Lights
whenever the door of the washer is
-
?
The door
can
be unlocked
by pressing
the
Start/Pause button to stop the washer.
The door can be opened after a short delay.
/ Main wash /
[WD(M)-14341(6)FD / WD(M)-14340(5)FD]
-
Program
/ Main wash /
Normal Rinse / 1400 rpm / 60˚C
-
Detecting
Cotton
[WD(M)-12341(6)FD / WD(M)-12340(5)FD]
4. Detecting
?
Program
Normal Rinse / 1600 rpm / 60˚C
locked.
?
Cotton
load
Cotton
Program
/ Main wash /
Normal Rinse / 1200 rpm / 60˚C
"Detecting" is shown in the display
machine rotates slowly and detects how
While the
the
many laundries are loaded in the drum.
It will take a few seconds.
?
Available in
Cotton, Cotton-Eco.
19
ow
H
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
?
When Child lock is selected, the
"
?
display
"
is
displayed.
delay is selected, it shows
the remaining time to finish the selected
program.
?
During washing cycle, the remaining
washing time is displayed.
Recommended program
※
-
2. Self
?
diagnosis display
If the washer encounters
a
fault
"
"
Water pressure
:
Problem of
:
Water temperature trouble
"
"
"
overfilling
-
"
:
error
-
water
-
-
Over load in motor
-
"
"
:
Over load in motor
-
"
"
Door open
No water
"
Door is not closed
:
supply.
"
:
Water inlet
-
?
trouble
"
Not
draining
"
:
Drainage
trouble
?
"
No
spining
"
:
Unbalanced load
If these error letters are displayed, please
refer to the troubleshooting page26 and
follow the guide.
20
Cotton 95˚C
:
1 hour and 57
minutes]
hour and 57 minutes)
1
Cotton 60˚C
:
around 1 hour and
-
"
manufacturer.
] : WD(M)-14341(6)FD / WD(M)-14340(5)FD
) : WD(M)-12341(6)FD / WD(M)-12340(5)FD
[
(
[around
(around
during
:
sensing
by
around 2 hours and 3 minutes
operation, the associated fault will be
displayed.
"
"
4. Time left
?
When time
washing
Synthetic
46[40](40)
minutes
around 1 hour and 20 minutes
:
Delicate : around 52 minutes
Wool/Silk
:
around 50 minutes
Hand Wash
:
around 44 minutes
Quick 30 : around 30 minutes
Rinse+Spin
Drain
:
:
around 24
[21](18)minutes
around 1 minute
The
washing time may vary by the amount of
laundry, water pressure, water temperature
and other washing conditions.
If
an
unbalanced load is detected
or
if the suds
program operates, the wash time
may be extended.
(Max. increasing time is 45 minutes.)
removing
M
aintenance
Before
the washer interior,
cleaning
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
regularly that the filter
CAUTION
!
is clean to
1.
ensure
left in the
smooth
laundry.
running of your
using "Drain" program and then open
whatever any threads or objects.
Be careful when draining if the water is hot.
First drain
Allow the water to cool down before
emptying
objects
or
the lower
opening
Open
cap ( ) by using a
coin. Drain plug ( )
to pull out the hose.
cover
the door in
2.
an
cleaning
water
carrying
remove
out emergency
emergency.
use a
flowing
the pump filter to
the drain pump,
Unplug the drain plug ( ),
allowing the water to flow out.
this time
machine.
3. Remove any
At
vessel to prevent
on
to the floor. When
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
2
1
2
3
3
21
aintenance
M
Dispenser
After
?
?
?
a
while
drawer
detergents
and fabric softeners leave
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
washing
?
replace
the drawer and
continuously
clogs appliances,
build up in
and if it is not
the
washing
If you
run a
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
which should
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
recess
drum
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
use
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
The water circulation nozzle
?
Clean the water circulation nozzle, if
Cleaning
clogged.
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
Remove hard water
NOTE
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting guide
TSymptom
Possible Cause
?
Water
in
No water
supply
?
Read Owner's manual
?
?
?
supply
is not
adequate
Solution
<Fig
1>
Check another tap in the house.
area
Water
supply taps are not
completely open.
Water inlet hose(s) are kinked.
The filter of the inlet hose(s)
are clogged.
If water leakage occured in the inlet hose,
indicator " " will be changed red color.
Fully open tap.
Straighten hose(s).
Check the filter of the inlet
hose(s).
[WD(M)-16340(5)FD/WD(M)-14340(5)FD/
WD(M)-12340(5)FD]
Not
draining.
Read Owner's manual
?
?
?
UE
?
Read Owner's manual
?
No
spining.
Read Owner's manual
?
Drain hose is kinked
The drain filter is
clogged.
clogged.
or
Clean and
straighten the
Clean the drain filter.
Load is too small.
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance has an unbalance detection
and correction system. If individual heavy
articles are loaded (ex. bath mat, both
robe, etc.), this system may stop spinning
or even interrupt the spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
drain hose.
or
2 similar items to
help
load to allow proper
Close the door.
Door open
?
Is the door
opened?
Close the door.
If "Door
Open" is not released,
for service.
tE
Unplug the
Read Owner's manual
service.
FE
?
Water overfills due to the
faulty water
valve.
Read Owner's manual
power
Close the water tap.
Unplug the power plug.
Call for service.
PE
?
Read Owner's manual
CE
?
Water level
sensor
Over load in motor.
Read Owner's manual
LE
?
Read Owner's manual
26
Over load in motor.
has malfunctioned.
plug
and call for
call
T
of Warranty
erms
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
it
product
the
means
product
is
symbol is attached to
covered by the European
a
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and
3. The correct
human health.
4. For more detailed information about
disposal
of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
?
?
or
by pests
product
for
or
change
example,
the set-up of the
product.
rats or cockroaches etc..
example
water drain
sound, spin
warming beeps.
Correcting
the installation for
example, levelling
Normal maintenance which recommended
by
the
Replace
the owner's manual.
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
Incidental
If this
consequential damage
appliance.
:
or
correct house
the pump and
plumbing.
repairs.
or
product
(Example
wiring
of drain.
product, adjustment
Removal of
with this
?
of
vibration that is considered normal for
inlet hose
?
on use
to
personal property
caused
by possible
defects
is used for commercial purpose, it is not warranted.
Public
places such
center, dormitory)
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF

advertising