LG | WT-R1071TP | LG WT-R1071TP Owner’s Manual

Washing
Machine
OWNER'S MANUAL
MODELS
:
WT-R1071TP
Please read this manual
carefully
before
operating your washing
machine.
Retain it for future reference.
Record model
name
and serial number of the
Quote this information to your dealer if you
P/No.: 3828EA3010D
washing machine.
require service.
P
roduct Features
C
The Turbo Drum DD
washing machine does not operate while the lid is open.
opened during wash, rinse or spin cycles, the machine will stop
automatically.
ontents
Read this manual
Inside you will find many helpful hints on how to use and maintain your washer properly.
Just a little preventive care on your part can save you a great deal of time and money over
If the lid is
the life of your washer. You will find many answers to common problems in the
Troubleshooting section. If you review our chart of Troubleshooting Tips first, you may not
need to call for service at all.
Fuzzy Logic Control
A built-in load
sensor automatically detects and measures the laundry load and
microprocessor optimizes washing conditions such as ideal water consumption
and washing time.
Advanced
the best
technology is built
washing result.
into the Electronic Control
SENSING
START
Laundry
System
which
SETTING
Sensor
Water Level Sensor
Optimum
Washing
WASHING
Condition
Turbo Drum DD
ensures
a
Introduction
Installation
AUTO
POWER
OFF
Before
Penetration wash from
centrifugal wash
4
Identification of Parts
5
BS
6
Plug Safety
Placing
washing
Drum Rotate
Important Safety Information
Starting
to Wash
and
Details
7
Leveling
Connecting
Water
Connecting
Drain Hose
Supply
Hose
8
9
Preparation Before Washing
10
Water Level
Temperature
11
Bleach
12
Use of
Detergent,
and Softener
Washing Programs
Stains
Drum rotates at
are
removed
by
water from
penetrating
centrifugal water whirl
high speed
Water pours down
and circulates
Function of each Button
14
Delicate Wash
16
Wool Wash
16
Normal Wash
16
Wash
16
Speedy
Low Noise Direct Drive
System
The advanced BLDC motor rotates the Tub
without belt and clutch,
of the washer.
The
machine
thereby reducing
directly
the noise
Additional Function
to
washing
adjusts optimum speed
according to the type of clothing in the load.
Fully Stainless Steel Washing Tub
Indentations on the stainless steel wash tub combined with the movement of
the water whirls,
gently
rub the
laundry
and
improve washing efficiency.
Options
Jean Wash
16
Soak Wash
16
Option Washing
Delay Start
Method
Wash
18
19
Other useful Functions
20
Care and Maintenance
Cleaning
21
Troubleshooting
Troubleshooting
23
Specification
Specification
27
5
4
mportant safety information
I
WARNING!
Introducin
I
READ ALL INSTRUCTIONS BEFORE USE
For your
or
safety, the information in this manual must be followed to minimize the risk of fire
explosion, electric shock, or to prevent property damage, personal injury, or loss of life.
Body
PROPER INSTALLATION
Install
or
store
dentification of Parts
where it will not be
The base
exposed to
opening must not be obstructed by carpeting when
washing machine is installed on a carpeted floor.
The appliance must be positioned so that the plug is
temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing
the
codes and ordinances.
accessible.
?
Water
supply
hose
?
pump model
?
YOUR LAUNDRY AREA
-
?
Keep the area underneath and
around your
of combustible materials such
as
chemicals,
lint,
appliances free
paper, rags,
etc.
supervision is necessary if this appliance is used by
or near children. Do not allow children to play on, with, or
inside this or any other appliance.
Keep the washing machine away from fire or heat source.
Close
?
Powder
panel
wet hands
Power bleach box/
?
Power cord
Do not touch the
power cord with
detergent
-
If the power cord
fuse is damaged.
or
it must be
Fully Stainless Steel
by the
Inner tub
or
appliance only for its intended purpose as
laundry process can reduce the flame retardancy of
fabrics. To avoid such a result, carefully follow the
Never reach into washer while it is
moving. Wait until the
machine has completely stopped before opening the lid.
Do not mix chlorine bleach with ammonia
or
acids such
as
vinegar and/or rust remover. Mixing different chemicals can
produce a toxic gas which may cause death.
dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or
explosive substances (such as wax, oil, paint, gasoline,
degreasers, dry-cleaning solvents, kerosene, etc.) which
may ignite or explode. Do not add these substances to the
wash water. Do not use or place these substances around
your washer or dryer during operation.
or
garment manufacturer's wash and
To minimize the
care
avoid
or
possibility of electric shock, unplug this
appliance from the power supply or disconnect the washer
at the household distribution panel by removing the fuse or
NOTE: Pressing Power button
disconnect the
to turn off does
its service agents
or
instructions.
switching off the circuit breaker before attempting any
maintenance or cleaning.
?
?
valves and to minimize
should
occur.
may need
Before
leakage
if
break
on
hoses and
rupture
Check the condition of the fill hoses; they
replacement after 5
a
or
?
appliance from the power supply.
Washing Wing
(unique with Inner Tub)
Never attempt to operate this
appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or
broken parts,
Accessories
discarding a washer, or removing it from
service,
remove
repair or replace any part of this
appliance
specifically recommended in this
Owner's Manual, or in published user-repair instructions
Do not attempt to
or
unless
that you understand and have the skills to carry out.
years.
Water
supply
hoses
Do not tamper with controls.
1 Each for cold and
hot water
the washer lid to prevent children from
hiding inside.
Read and follow this Safety Information
SAVE THESE INSTRUCTIONS
carefully.
risk of fire
Turbo Clean Filter
WHEN NOT IN USE
Turn off water faucets to relieve pressure
a
electric shock.
Adjustable leg
NOT
Young children should be supervised to ensure that they
do not play with the appliance.
replaced
manufacturer
similaly qualified
people in order to
The
described in this Owner's Manual.
Do not wash
Feature Control
Softener box
WHEN USING THE WASHER
Use this
Drain hose for
Note
Part
can
be different
according to the model.
Drain hose
Introducin
7
6
B
S
Plug Safety Details(For
U.K.
and
Placing
User)
Leveling
IMPORTANT
Instal ion
Please ensure that transit restraint has been removed
before operating your machine.
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Instal ion
Washer
GREEN AND YELLOW: EARTH
Base
BLUE: NEUTRAL
Packing
BROWN: LIVE
This
appliance
must be earthed
1
Place the machine
on a
flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2cm right
side and left sides of the machine for ease of
Green and Yellow(Earth)
Brown(Live)
At the rear,
Fuse
L
Blue(Neutral)
more
than 10cm
installation.
E
a
minimum clearance of 10cm is
more
than
suggested.
2cm
N
than
more
2cm
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the
which is marked with the letter E
or
by
the earth
symbol (
)
or
coloured Green
or
plug
Green and
Yellow.
2
Check that the machine is level
Open the lid
and look from above to
drum sits
shown.
as
see
Top
view of the machine
if the
The wire which is coloured Blue must be connected to the terminal which is marked with the
letter N
or
coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the
letter L
If
a
or
coloured Red.
13 amp
(BS 1363) plug
is used, fit
a
13 amp BS 1362 fuse.
3 Leveling
the machine
Lift the front of the
washing machine and twist
Adjustable Leg
washing machine is
placed evenly.
the
until the
Adjustable legs
Caution
If the power is supplied from a cord extension set
outlet device should be positioned so that it is not
or
generator, the cord extension
exposed
to
splashing
or
ingress
set
or
electrical
of moisture.
portable
9
8
C
Instal ion
Water
Supply Hose
Drain Hose
the correct instruction.
Connecting
Note that the Water Supply Hose supplied may vary from country to country, Make sure to connect
the blue inlet hose to the cold water tap, and the orange inlet hose to the hot water tap
Washing machine is to be connected to the water mains using new hose sets and that old hose sets
How to install the drain hose
onnecting
Before
connecting
the Water
Supply
Hose to the water tap, check the hose type and then choose
Before connecting Drain Hose, check your Drain Hose model and choose
the correct instructions.
Instal ion
should not be reused.
Connecting
Water
Normal
Supply
Hose to water
Type
the
Untighten
(Normal tap without thread &
screw
1
screw
Fit the machine end of the drain hose to the outlet
2
Put the other end of the drain hose over the
of the drain pump and
tighten the clamp.
type inlet hose.)
Rubber
(option)
Untighten the screw of the connector so
tap can be placed in the middle.
Fixing
tap
1
packing
standpipe or
Hose
Guide
wash tub.
that the
Within 50mm
screw
Connector
the connector to the tap
3
(option)
Fit the plastic holder into either holes for the holder at the
rear
of the machine. The holder is possible to fit at either
0.9~1.2m
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
diredtion according to location of the standpipe. Make sure
tighten the 4 screws.
hose should not fall down
Drain Hose
that the holder keeps firmly the drain hose so that the drain
as
Holes for the Holder
shown in the fig.
Attach the water supply hose ensuring it connects
securely to the connector or the water tap
Push the water
supply hose vertically upwards
that the rubber seal within the hose
completely to
can
Connector
so
or
Tap
adhere
Note
Water
the tap.
Supply
To prevent siphoning, the drain hose should not extend more than 50mm from the end of the hose
The discharge height should be approximately 0.9
1.2m from the floor.
Hose
guide.
~
2
Tighten
the connection between the water
supply
hose
Attach the water
then
supply hose to the connector and
tighten it by screwing it to the right.
Flooding drainage
Your machine
requires
a
floor
drainage slope (or hole)
that will SAFELY DISPOSE of the FULL
FLOW of any water that may leak out should the machine malfunction.
It is therefore the OWNER S RESPONSIBILITY to make sure this machine is installed in
3
Check the connection of water
supply
hose and the connector
with
connecting the hose, open the tap to check
for any water leakage.
In case of water leakage, close the tap and start
Water
?
Supply
Connect the water
Hose to the machine
supply hose to
?
inlet valve of
?
washing machine, and then lock it by turning
the hose connecting part.
the
Check
to
see
if there is
the connector.
a
(or slope)
that will prevent any
possibility
of water
damage
to floor
an area
coverings
or
Caution
1
?
Connecting
drain hole
property.
After
again from step
a
?
rubber seal inside
Hose connector
?
Rubber seal
Do not install the washer where it is
directly exposed to sunlight, wind, rain etc.
a properly installed standard power point that is
Plug the power cord of this washer into
earthed.
Permissible water temperature : Max 70
Permissible water pressure : Max 116psi
(160
switched &
)
(800kpa, 8kg/cm2), Min 4psi(30kpa, 0.3kg/cm2)
If water temperature & pressure is greater than above, it may cause damage to the machine.
If you
have uncontrolled water temperature & pressure you should fit a temperature & pressure relief valve to
ensure that water temperature & water pressure remains within the safe limits. Consuit a plumber or
electriclan if you are unable to adjust water temperature and pressure.
Do not over tighten the coupling nuts with a tool. Inlets are plastic : Do not
strip or crossthread.
11
10
P
BeforStaingWsh
reparation
Before
This machine detects the
?
your clothes. This will tell you about the fabric content
of your garment and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, water
Look for a
care
label
on
?
?
When the water level is
?
SMLXL
automatically detected, it may differ depending on the quantity of
laundry even though the same water level is indicated on the control panel.
results, different fabrics need to be washed in different ways.
Note
(Heavy, Normal, Light)
Separate clothes according to the type and amount of soil
COLOUR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
LINT (Lint producers, Collectors)
Separate lint producers and lint collectors.
SOIL
?
?
Lint Producers
Terry cloth, Chenille, Towel, diaper
Synthetics, Corduroy, Permanent Press, Socks
Lint Collectors
Wash, Wash/Rinse or Rinse only option is selected,
When
a
not be
drained off.
?
CHECK BEFORE LOADING
after the wash is
.
If you do not
If Rinse
specify
the water level, then Medium will be
only is selected, the process will
start from Water
automatically
selected.
Supply.
washing machine may occasionally add water while pulsator is rotating.
level due to the release of air trapped in the garments.
?
Check all
pockets to make sure that they are empty. Things such as nails, hairclips, matches,
can damage both your washer and your clothes.
Fasten zippers, hook and strings to make sure that these items don't snag on other clothes.
Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
Remove any loose brassiere wires as they can damage your washer and clothes.
completed the water will
If you wish to drain the water, press the SPIN button and wait until the water in the tub has drained
Then press the START/PAUSE button
completely.
?
?
then sets the water level
When you select a wash program, the water level and amount of detergent
(to be used) will be shown on the control panel.
?
SORTING
?
quantity of laundry automatically,
and proper amount of detergent.
temperature and spin speed.
To get the best
Temperature
WATER LEVEL
CARE LABELS.
*
Level
Water
Washing
The
This is to maintain the water
pens, coins and keys
?
?
?
?
?
?
WATER TEMPERATURE
?
Pretreat any dirt and stains.
sure the clothes are washable in water.
You
can
change the water temperature by pressing the WATER TEMP button. (Option depending on model).
the effectiveness of all
Make
The temperature of the water
Check the
results. We recommend temperatures of:
washing instructions on your clothes.
HOT
cover
and
heavily soiled,
colorfast items.
30~40˚C(85~105˚F)
COLD
the clothes.
18~24˚C(65~75˚F)
Only very bright colors with light soil.
Large-sized clothing
Clothes
including downs and woollens are light weight, large and
easily.So use a nylon net and wash them in a small amount of
water.
laundry floats during the wash cycle, it may become damaged.
Use dissolved detergent to prevent the detergent from clumping.
If the
nylon nets for long, delicate items.
For laundry with long strings or long length, a net will prevent tangling during
washing.
Fasten any zippers or hooks on items before washing.
Nylon net is not supplied by LG.
washing in cold water additional steps may be needed:
Adjust detergent amount and pre-dissolve detergent in warm water
When
?
?
?
?
Long laundry items
Use
therefore, the cleaning
Most items.
Adjust the load size accordingly. Loosely load clothes no higher than the
of
holes
in
the
tub.
To
add
items
after washer has started, press Start button and submerge additional
row
washer
top
items. Close the lid and press Start button again to restart.
float
items, diapers, underclothing
WARM
containing flammable materials (waxes, cleaning fluids, etc.).
The water level should just
and
and
50~60˚C(120~140˚F)
White
Load Size
Light
laundry additives
WIRE
LOADING
Do not wash fabrics
impacts
?
?
Pretreat spots and stains
Soak heavily soiled items
Use
appropriate bleach
Temperature below 18˚C (65˚F) will not activate laundry additives and may cause lint, residue, poor
cleaning, etc. In addition, detergent manufacturers and care labels define cold water as 26~29˚C(80~85˚F).
If the temperature of the water in the tub is too cold for your hands, the detergent will not activate
and clean effectively.
BeforStaingWsh
13
12
U
BeforStaingWsh
se
of
Use
Detergent
use of domestic detergent, (powder, liquid or concentrated). Soap flakes
powders should not be used in your washing machine. When washing woolens
a detergent suitable for washing woolens.
We recommend the
or
granulated
remember to
soap
use
AMOUNT OF DETERGENT
Follow the
problems.
AVAILABLE FABRIC SOFTENER TYPE
Do not
For
detergent package directions. Using too little detergent is a common cause of laundry
more detergent if you have hard water, large loads, greasy or oily soils or lower water
?
Use
and concentrated
?
(Jeans
?
and
?
detergents, follow the recommendations of the detergent manufacturer.
?
Note
look
dispensing.
Don't
use
softener with
detergent. Use softener in last rinse water
softener(30ml) with
When using dispenser, dilute
fresh water(30ml)
When filling dispenser, do not
It may stain clothes.
splash or overfill.
Never pour fabric softener directly on clothes. It may stain them
If spotting occurs, wet and hand rub dishwashing liquid (or mild
bar soap) and rewash.
If the softener is
it
can
over
filled,
overflow
Note
To check you are using the correct amount of detergent, lift the lid of your machine about half-way
through the wash. There should be a thin layer of foam over the surface of the water. Lots of foam may
been
concentrated fabric softener. This may cause some problems in automatic
products instructions for use.
details refer to the softener
DEPOSITING FABRIC SOFTENER
The correct amount of detergent will vary depending on the amount of soil in your clothes
work clothes may need more detergent, while bath towels usually need less).
liquid
use
more
temperature.
For
BeforStaingWsh
Using Softener
CHOOSING THE RIGHT DETERGENT
?
of Softener and Bleach
Fabric Softener will be
dispensed automatically during the final rinse.
good, but it does not contribute to cleaning your clothes. No foam means not enough detergent has
used; soil and lint can settle back on the clothes or the washing machine.
Using
Bleach
Check fabric
care
labels for
special instructions.
Attention
If excessive
pollution,
detergent is used, the rinse will not be as clean and efficient. Also, it could cause environmental
it accordingly.
AVAILABLE BLEACH TYPE
so use
Use
oxygenated bleach.
use liquid bleach.
Do not
For
more
details refer to the
products instruction for use.
ADDING THE DETERGENT
?
Some
DEPOSITING BLEACH
detergents MUST be fully dissolved before adding to your machine to get the best wash
on the detergent packet.
results. Check the instructions
?
powder detergent it is essential that the required amount be fully dissolved in very hot
water before being added to warm or hot water for the actual wash.
Pre-dissolving detergent in warm water when washing in cold water can improve its performance.
If you
?
use
Open the DETERGENT Box and deposit the
appropriate amount of detergent
Powder
.
Where you
deposit the
detergent
Detergent /
Powder Bleach
dispenser.
?
?
Separate the laundry to be bleached.
powdered bleach carefully, following instructions on the box.
Before starting the washer, pour measured amount of bleach directly into bleach dispenser.
Measure
Attention
Never pour undiluted liquid bleach directly onto clothes
This may affect colors or damage clothing.
or
into the wash basket.
Do not mix chlorine bleach with ammonia
as
vinegar and/or rust remover. Mixing can
or
acids such
toxic gas which may cause death.
Do not pour liquid bleach into bleach dispenser.
produce
a
15
14
F
BeforStaingWsh
unction of each Button
Water level
Stain Level
Default is MEDIUM.
?
By pressing
LIGHT
[HEAVY
MEDIUM] mode repeats.
button
Available all
cycle
Available during washing.
?
?
Display
Wash Process
?
Use to select water levels.
?On:willdo
?
Available
?
?
during washing.
For appropriate quantity of
detergent follow the detergent
Blink
:
Motor
Display Delay
Speed
Indicator
?
doing
?Off:Done
?
manufacturer's instruction.
light circulates
according to motor
speed.
The
?
-
Start Pause Button
Time
Used to indicate the time left of all
processes or delay.
In case of abnormal
operation the
following indications are displayed
PE
Abnormal water
:
?
Use it to start
or
pause.
By pressing the button [Start
are repeated.
Pause]
sensor
(No Sensing Water Levels)
-
-
-
CE
:
Overload
LE
:
Abnormal motor
UE
:
Unbalanced load
(No Spin)
Abnormal
Operation
Display
?
In
of abnormal
operation
problem will be light and a buzzer
case
will sound.
Silent
MOTOR SPEED INDICATOR
NO INLET
SOAK
?
Use it at
?
When selected "Silent"
night to wash quietly.
lights are on
and the other cycle's light are all off.
DOOR OPEN
STAIN
WASH
LEVEL
LIGHT
HEAVY
MIN
WATER
COLD
SILENT
HOT
DELAY/TIME LEFT
AUTO OFF
?Useittoturnonandoff.
WOOL
RINSE
LEVEL
NORMAL
PRO
START
GRAM
PAUSE
TIMES
SMLXL
Power
DELICATE
?
SPEEDY
WATER
SPIN
TEMP.
DELAY
JEAN
MIN
NO DRAIN
?
By pressing the button
[On
Off] are repeated.
Electrical power automatically
turns off 10sec, after the washing
cycle finishes with "boo~"sound.
Electric power automatically turn
off after 10min. in 'Pause'
condition.
Water
?
Temperature
Use to select proper water temperature
while running.
?
Available
?
Cold water for
Wash, Rinse and Spin Button
?
?
during washing.
?
"WOOL" & "DELICATE"
(When
hot water
is selected,
only
supplid for washing and
cold water is supplied for rinsing)
?
change washing time, the number of rinse, spin time.
To change washing time, the number of rinse, spin time during wash,
do it after pressing "START/PAUSE" button.
Soak is used to remove old or hardened dirt more effectively.
You can change wash time after soak(80min.)
Choose 1min Spin to avoid wrinkle
Use to
hot water is
Child Lock Function
Use to lock
or
unlock the control
setting from
being changed by a child.
To lock, push the RINSE, and SPIN
buttons simultaneously and to
unlock push them one more time
during the washing process.
Delay
?
Program
Use this function for
delayed
washing.
buttons to prevent
?
Use it to set the
?
?
delayed
time.
?
Not available for delicate.
?
Available from 3~24Hr
Use it to select
By pressing
SPEEDY
[NORMAL
DELICATE
WOOL]
(refer
Note
The control
panel may differ according to different models
washing programs.
button, it cycles
the
to
p12)
JEAN
BeforStaingWsh
17
16
Washing Programs
WashingProm
Add
the
Washing
Programs
START
PAUSE
WASH
laundry
DELICATE Wash
1
2
3
Use this program for washing delicate
fabrics such
PRO
GRAM
Add
the detergent
4
Close the lid
5
6
7
When setting the water level
Select the
DELICATE
lingerie.
Before washing your woolens check the
care label for the washing instructions.
(wash only "water washable" clothes)
as
Caution & Note
Finish
When the wash program
ends, the buzzer will ring
program on the
Control panel.
for 10 seconds before the
Power goes off
automatically.
1
3
4
7
6
5
some water.
This is normal.
Soak Wash cannot be selected for the Wool and Delicate
WOOL
washing woolens.
"water
washable"
(wash only
clothes)
Washing
Use appropriate neutral
Select the
WOOL
Use this program for
Normal
2
manually, do not set to
laundry.
Washing with hot water may damage the laundry
(Water is set to warm automatically). Ensure that the load
is under 3,5kg
In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing may still contain
MEDIUM to prevent damage to
program on the
Control panel.
1
3
2
Used for normal loads, this mode
automatically selects the most
appropriate conditions and completes
the sequence in one operation. The
built-in sensor detects the size of the
load and the ideal wash power and
wash, rinse and spin times are set
accordingly
2
3
5
4
The inner-tub rotates for 10
seconds to detect the laundry
load.
Then the Water Levels and the
amount of detergent to be used
will be shown and water will
be supplied.
1
Wash program.
detergent for the laundry
When washing woolens use a
mild detergent recommended
for washing wool.
4
Water will be supplied
6
For adding the appropriate
quantity of detergent follow
the detergent manufacturer's
2 min. after the start of the
When the wash program
ends, the buzzer will ring
wash to
for 10 seconds before the
instruction.
water the laundry has
Power goes off
absorbed.
automatically.
supplement the
If water is already in the tub, or wet laundry is
placed into the tub water will be added to the
optimal level before washing starts..
With lightweight bulky loads, water level can
be set to low.
Changes to water temperature (hot/cold) and
are possible during operation.
(refer to p 14)
wash level
5
6
7
5
6
7
SPEEDY
Use this mode when washing
lightly
Select the
SPEEDY
soiled clothes for a short time.
program on the
Control panel.
Jean Wash
Use jeans program when
1
3
washing
heavy, thick, and extremely dirty
laundry such as jeans and work
1
heavily dirty
laundry by soaking in water for some
time to remove proteins and fats.
Select the
desired program
(Not available
for "WOOL" &
DELICATE"
4
?
'DELAY' light is blinking and left time
is displayed.
?
Press 'WASH' button until 'Soak 80' lights on.
Wash time except soak is changeable to 15, 21 by
pressing 'WASH' button
Select No. of rinse and spin time by pressing button.
?
"
program).
It is normal to wash lower water level before the main wash.
5
2
3
Soak Wash
Water may splash out when washing light
laundry such as a cashmere blanket or bed
sheet with water set at high level.
Select the Jean
program on the
Control panel.
outfits.
Use this mode for washing
4
2
?
6
7
8
Electrical power is
automatically off in
10sec. after buzzer
sounds.
Soak time is 80min
WashingProm
19
18
O
AditonalFucOps
ption Washing
Method
Delay
Start Wash
Delay Start (Reservation) Wash is used to delay the finishing time of the
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time not the start time.
operation.
AditonalFucOps
,
WASH
WATER
LEVEL
START
By pressing button
RINSE
SPIN
Select water
levelsAdd
PAUSE
detergent.
Soak
3
Soak
min
Wash
1
4
2
Wash
min
min
Wash
OFF
min
min
1
Press the POWER button to turn power
2
Press the PROGRAM button to select the
min
min
Close the
lid Press
Start/ Pause
button.
Select
WASH
time.
washing program.
Select the program for laundry on the Control panel.
This method will not work in Wool Delicate Program.
PRO
GRAM
only
on.
min
3
Press the DELAY button to set the time when the
delayed washing
is to be
completed.
SMLXL
DELAY
?
The time
?
The time
changes 3~24hours.
on the display is the finishing time,not the
start
time.
The
appropriate quantity of detergent marked next to the
3
Rinse
Rinse
1
2
4
Rinse
time
Rinse
time
Rinse
time
time
4
Add the
detergent.
only
Select No.
of RINSE.
SMLXL
Close the
lid Press
Start/ Pause
button.
OFF
Add the
laundry
PAUSE
5min
2
Select
SPIN
3
Close the lid
4
Press Start/
Pause button.
7min
OFF
1min
3min
6
an
and press the START/PAUSE button.
START
1
WATER-DETERGENT.
When the lid is open the machine will not operate, and
alarm signal will remind you to close the lid
5
Spin
only
water level of
When you press the START/PAUSE button the
blink.
supplied for 2 minutes after the start of the
supplement the water the laundry has absorbed.
Close the lid.
Water will be
Finish
The
wash to
light will
washing will be finished according to the delayed time.
Note
3
If the lid is open, the machine will not work, and
DOOR OPEN" to remind you to close the lid.
an
alarm & will sound and
panel will display
"
Rinse
Spin
only
1
2
Select No.
of RINSE
and SPIN
time.
4
SMLXL
Close the
lid Press
Start/ Pause
button.
washing program, spinning time, water level or hot/cold manually, press the
and select the desired option. Then press the START/PAUSE button.
To select
Delay Start button
laundry cannot be taken out immediately after the wash program ends, it is better to omit the
spinning program (The laundry will be wrinkled if left for a long time after spinning.)
When the
.
21
20
O
AditonalFucOps
ther Useful Functions
Cleaning
Child Lock Function
To Clean the Filter in the Inlet Valve
If you want to lock all the
the child lock
keys to prevent all settings from being changed by a child, you can use
option.
1
How to Lock
1
Press the POWER button.
Turn Power
Press the START/PAUSE button to start
supply into the tub is not clean
occasionally.(The figure of power
cord and water
Close the tap before
are
set
according to
the manual.
with
particles(Such
tap may vary according
as
to the
sand), clean
country)
the filter in the
Turn off the power before
pulling out the cord.
completely.
After
removing the water
supply hose pull out the filter.
use a
clogged
2
power.
Select both hot/cold and then press the
[START/PAUSE] button to remove
Then
washing conditions
the filter is
turning off the
water from the machine
washing.
After all
or
inlet valve
on.
3
2
When water
4
Replace the filter after cleaning it.
brush to clean
the filter.
START
PAUSE
3
Press both the RINSE button and the SPIN button
simultaneously.
Caution
?
?
RINSE
SPIN
During the wash program, all the buttons are locked
until washing is completed or until the child- lock
function is deactivated manually.
cleaning the filter,
impurities in the water supply hose should be removed.
the
To clean the Turbo clean filter
1
Pull out the Turbo
Clean Filter in the
2
direction shown
How to Unlock
If you want to unlock
Before
After
disconnecting
the net,
with
a
remove
brush,
dirt
3
Assemble the net
as
before.
and the SPIN button
Replace
the Turbo
Clean Filter
original
etc.
to the
location.
Push the cap until
below.
during wash, press both the RINSE
4
simultaneously again.
Note
In child-Lock
mode, the LED display continuously repeats
"
"
and
a
pop sound is heard.
remaining time.
To Clean the
1
Pump casing (for pump model)
Unfasten 4
back
screws
of the
cover.
2
Turn the cap as shown in
diagram and unfasten it.
Remove
as
foreign objects
pin, button, coin,
3
fasten it.
such
etc
(Bottom view)
(Bottom view)
Caution
?
Check if water leaks after
reassembling. (The
Rubber
Reassemble the cap to
the arrow direction and
ring
is in the
cap)
CarendMitc
23
22
C leaning
CarendMitc
Troubleshooting
Look for your
problem below,
not, this will give you the
without
having
to
then check the
things
we
to your problem. And
your service center.
answer
telephone
suggest.
you'll be
More often than
able to carry on
Troubleshting
WHEN THERE IS A FEAR OF FREEZING
WASH PROBLEM
1
Close the water taps and
2
Remove the water which remains in the water
3
Lower the drain hose and drain the water in the bowl and the drain hose
remove
the water
supply hose.
Problem
supply.
Lint or residue
on clothes
by spinning.
IF FROZEN
Remove the water
2
Pour approx.. 2 litres of hot water at approx.. 40
supply hose,
Connect the water
3
supply
and
supply hose to
drainage of water.
Wash Inner-tub
the bowl and let it stand for 10 minutes.
the water tap and confirm that the
washing machine performs
Detergent
Inlet Hoses
the
connecting
Immediately wipe
sharp objects.
Vacations
Be
sure
sorting
Washing
too
long
on
Detergent not
dissolving
Incorrect use of
fabric softener
What To Do
?
?
?
?
?
?
?
?
?
Dye transfer
off any
supply
freezing.
spills. Wipe
replaced every 5 years.
with damp cloth. Try not to hit surface with
?
washer to faucet should be
water
be below
Black spots
clothes
gritty cleaners.)
Hoses
Exterior
on
clothes
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid detergent, then rinse. (Do
not use harsh or
Long
˚C, into
Incorrect
Natural By-product
When Washing
Certain Items
and immerse it in hot water at approx.. 40 ˚C.
1
Possible Causes
Separate lint producers from lint collectors.
Wash small loads for
?
shorter time than
larger loads.
Some lint is normal. Using the dryer should
any lint not removed by the washer.
Use
warmer
water
remove
temperature.
Try pre-dissolving the detergent in warm water
Try a liquid detergent.
When
filling dispenser, do not splash or overfill.
directly on clothes.
Never pour fabric softener
Pre-treat stain and rewash.
Sort whites
-
Not enough
detergent used
a
Wash and
or lightly colored items from dark colors.
dry non-colorfast clothes separately
Using insufficient detergent for the amount of soil
on
the
clothes,
result in black marks
can
on
clothes
is shut off at faucets. Drain all water from hoses if weather will
A
buildup caused
by the interaction
?
Cleaning the inside of your washing machine
of fabric softener
and detergent can
flake off and marks
clothes.
SCRUD
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
into contact with detergent. This build-up is not brought about by a fault in the machine.
comes
If scrud is allowed to build-up in the machine it
unpleasant smell in your washer.
If you wish to
?
?
?
?
use
Using the fabric
Clean
we
result in stains
on
your clothes
or an
Fabric
(Snags, holes,
tears, rips or
recommend.
the
dispenser as
dispenser,
soon as
the
do not
splash or overfill.
cycle has
finished.
regularly
washing increases
the chance of this
build-up occurring.
We recommend
a warm or
hot wash at
regular
intervals e.g. approx. every 5th wash.
?
Fabric softener of thinner
consistency is
less
likely to
leave residue
on
the
dispenser and contribute to a build-up
CLEANING THE INSIDE OF YOUR WASHER
?
?
?
damage
excessive
Clean your machine
Cold water
fabric softener
can
Fill your machine with hot water. Add about two cups of
a
powder detergent that contains phosphate.
Let it rotate for several minutes.
Stop the machine,
drain the machine and
run
We do not recommend that you wash clothes
the machine
through a regular cycle.
during this procedure.
wear)
Pins, snaps, hooks,
sharp buttons, belt
buckles, zippers,
and sharp objects
left in pockets
Chemical Damage
a. Chlorine Bleach
b. Battery Acid
c. Hydrogen Peroxide
d. Skin & Hair Care
Products
Non-chemical Damage
a. Age & Normal Use
b. Poor Construction
c.
Overloading
d. Mice & Insects
e.
Sunlight
Fasten snaps, hooks, buttons, and zippers.
Remove any loose brassiere wires.
Remove
objects in pockets and sharp buttons.
(which snag easily) inside out.
Turn knits
Dilute bleach
the
or use
dispenser (See User's
Guise)
Use caution around
care
products
holes
or
tears
-
can remove
skin and hair
color and
cause
in fabrics.
Check construction
Mend any
battery acids,
these
carefully when purchasing
damage before laundering
25
24
T roubleshooting
Troubleshting
Troubleshooting
Before
calling for
service check the
problem against
the list belows.
Troubleshting
WASH PROBLEM
The
Problem
Possible Causes
laundry
out dirty
Water temperature
is too cold.
?
Water temperature
is not correct
?
Select the wash temperature
?
For
comes
What To Do
Use
water
warmer
Error
Symptom
temperature
Water
Supply
Message
Check up
?
Failure
?
?
Is the tap
?
Is the water pressure low
soil type.
better washed in
according to
example, blood and mud are
oily soils wash better in warmer
cold water, while
Is the water tap shut off?
Is the water supply cut off ?
NO INLET
valve
water.
or
water
clogged
supply hose frozen
with
or
?
is the filter of the inlet
impurities?
DOOR OPEN
Stain is not pretreated
?
a
little
?
like collars and cuffs to
?
Washer is
overloaded
detergent dissolved in water onto stains
help shift dirt.
Wash stains as soon as possible. The longer they are
left the harder they are to remove.
Brush
?
Wash smaller loods at
a
time.
is Cold?
Drain/Spin
Failure
?
Is the Cold hose connected to Hot?
?
Is the drain hose
?
Is the drain hose bent
?
sorting
?
?
White clothes
better washed
separately. Separate
light and heavily soiled items, as clothes can pick up
soil from dirty wash water.
Loads made up of articles of varying sizes will wash
better (e.g. full loads of sheets may not wash that
are
?
?
DELAY/TIME LEFT
Drain Failure
well).
?
detergent
Pilling
Result of normal
wear on
poly-
cotton blends and
fuzzy
Grayed or
yellowed
clothes
fabrics
Not
enough
detergent
?
slow the
by the washer, you
pilling process by washing
garments inside
Use
more
Spin
Failure
DELAY/TIME LEFT
drain pump
(only pump model) clogged
impurities?
laundry evenly balanced?
Is the washing machine placed on a flat surface?
Is the drain hose
Is the drain hose bent
enough detergent for load size or amount of soil.
Hard water requires more detergent than soft water.
can
or
Is the
?
Not
While this is not caused
Is the internal part of the hose
?
?
Insufficient
positioned correctly?
or placed too high?
with
NO DRAIN
Incorrect
Is Hot/Cold selected to Hot when the hose connected
positioned correctly?
or placed too high?
Is the internal part of the hose
with
or
drain pump
(only
impurities?
pump
model) clogged
?
Is the
laundry evenly balanced?
?
Is the
washing machine placed on a flat surface?
?
Is the lid closed?
out.
detergent (especially with larger loads).
Door(Lid) Open
NO INLET
Water is not hot
Make
enough
120˚F~40˚F.(48˚C~60˚C.).
Washer is
overloaded
Select load size
Dye transfer
Sort clothes
sure
water heater is
DOOR OPEN
delivering water at
to match clothes load.
?
by color. If fabric label states wash
separately,unstable dyes may be indicated.
Ask for
help
at the
LG Electronic branch of the Service Center
Abnormal level
sensing.
DELAY/TIME LEFT
Power failure
DELAY/TIME LEFT
Overflow failure
DELAY/TIME LEFT
Abnormal motor
DELAY/TIME LEFT
27
MEMO
Specification
Inlet water pressure
max.800
min.
1039m alowingfor
30
PSI(115kPsi)
PSI( 4kPsi)
M90-12m Standpie Inimuhegtofaps clrhetofmain
1 50m
adjustblef
230-240V
Electricity supply
693mm
50Hz sinusoidal
632mm
Model
WT-R1071TP
Type
Fully
automatic washer
Washing capacity
Electrical
10.0kg
See the
ratings
rating plate
attached to the
rear
of the washer
Standard amount of water
(EX-LARGE
water
level)
Approx.
90
Standard amount of water used
(NORMAL cycle)
Washing system
Water
tap pressure
Outer dimension
Weight
Approx.
Automatic
220
reverse
30-800kPa
pulsator type
(0.3-8kgf/cm2)
632X693X1039
(WXDXH)
48kg
mm
Download PDF