LG | WM-12380TB | LG WM-12380TB Owner’s Manual

For U.K. Customer
CUSTOMER SERVICES
:
0870-592-9929(Service Force)
Mon.-Fri. 8:30AM
LGEUK SERVICE WEB-SITE
P/No.: 3828ER3047Y
:
-
5:30PM
www.lgelectronics.co.uk
Washing
Machine
OWNER'S MANUAL
WD(M)-10380(5)TB
WD(M)-12380(5)TB
WD(M)-14380(5)TB
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P
roduct Feature
against Crease Care
Protection
With the alternate rotation of the drum,
wrinkling
in the
laundry
is
minimized.
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
washing
time to minimize energy and water
water level and
consumption.
Child-Lock
The Child-Lock system has been used to prevent children from
pressing any button to change the program during operation.
Low noise
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
evenly
distributes
Auto Restart
If the
washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
Terms of
2
.............................................................24
Warranty ...................................................................27
W
arnings
READ ALL INSTRUCTIONS BEFORE USE
WARNING!
!
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
store the washer where it will
?
Do not tamper with controls.
Do not repair or replace any part of the washer
or attempt any servicing unless specifically
recommended in the user-maintenance
?
published user-repair
or
?
dry articles that have been
cleaned in, washed in, soaked in, or spotted with
combustible or explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
or
instructions.
the
Keep
appliances
underneath and around your
free of combustible materials such
?
area
etc.
on,
with,
Do not slam the washer door closed
?
inside
hang
?
Never reach into washer while it is
moving. Wait
until the drum has completely stopped.
The laundry process can reduce the flame
try to
possibility of electric shock,
unplug this appliance from the power supply
or
disconnect the washer at the household
on
crawl inside the washer.
or
To minimize the
distribution
Do not leave the washer door open.
An open door could entice children to
or
or
care
force the door open when locked. This could
result in damage to the washer.
as
Close supervision is necessary if this appliance
is used by or near children.
the door
?
instructions
Do not wash
out.
play
this or any other appliance.
?
using
garment manufacturer's wash and
Do not allow children to
?
to persons when
that you understand and have the skills to carry
lint, paper, rags, chemicals,
?
injury
precautions, including the following:
exposed to the weather.
instructions
or
panel by removing the fuse
or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
retardant of fabrics.
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
?
?
If you don't have the proper
WARNING :
outlet, consult
an
electrician.
Improper
connection of the equipment-grounding conductor can result in risk of electric
shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
-
proper outlet installed
by
a
qualified electrician.
3
S
pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
manufacturer
or a
Drawer
similarly
its service agents
qualified person in
order to avoid
and
(For detergent
fabric softener)
Control
or
a
hazard.
panel
Drum
Door
Drain pump filter
Lower
Drain
cover
Adjustable
plug
Lower
feet
Name
cover
cap
:
Front
:
220-240V~,50Hz
Size
:
Weight / Max.Watt
Wash capacity
Water consumption
:
Permissible water pressure
:
Spin speed
:
600mm(W)×550mm(D)×850mm(H)
65kg / 2100W
7kg
59ℓ(8.4ℓ/ kg )
0.3-10kgf/㎠ (30-1000kPa)
No spin/400/600/800/1000 [WD(M)-10380(5)TB]
No spin/400/800/1000/1200 [WD(M)-12380(5)TB]
No spin/400/800/1000/1400 [WD(M)-14380(5)TB]
Power
supply
The appearance and
:
:
loading washing
specifications may
machine
be varied without notice to raise the units
Accessories
Spanner
4
quality.
nstallation
I
temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
Install
or
carpeted
store where it will not be
exposed
to
floor.
In countries where there
which may be subject to infestation by cockroaches or other vermin,
attention to keeping the appliance and its surroundings in clean condition at all times.
particular
Any damage which
pay
are areas
may be
cause
by
cockroaches
or
other vermin will not be covered
by
the
appliance
guarantee.
Transit bolts
The
?
appliance is fitted
with transit bolts to
prevent internal damage during transport.
and all transit bolts must
Packing
be removed before
using
the
washer.
Washer
When
sure
the base, be
the additional
unpacking
to
remove
packing support in the
of the base packing.
Removing
middle
Packing Support
Base
(Packing support may not
be used depending on
models.)
Packing
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are
locked. Before operating the washer,
3. Take out the 4 bolts
along with the
rubber bungs by slightly twisting the
bung. Keep the 4 bolts and the
spanner for future
remove
the bolts
?
If
they
heavy
along
with the rubber
bungs.
removed, it may cause
vibration, noise and malfunction.
are
not
2. Unscrew the 4 bolts with
the spanner
use.
?
Whenever the
appliance is transported,
the transit bolts must be refitted.
4. Close the holes with the caps
supplied.
supplied.
5
nstallation
I
Installation place requirement
Level floor
Drain Hose
:
Allowable slope under entire washer is 1˚
Power outlet :
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than one appliance.
Additional Clearance :
For wall, door and floor modeling is required.
(10cm : rear /2cm:right & left side)
Washer
Laundry
Tub
approx.
2cm
Do not place or store laundry products on top of
washer at any times.
They can damage the finish or controls.
Positioning
Install the washer
Make
?
?
?
?
?
sure
on a
flat hard floor.
that air circulation around the washer is not
Never try to correct any
washer.
If it is
unevenness
in the floor with
impeded by carpets,rug etc.
pieces of wood, cardboard or similar materials under the
positioning the washer next to a gas cooker or coal burning stove,an insulating(85x60cm)
covered with aluminum foil on the side facing the cooker or stove,must be inserted between the two appliance.
The washer must not be installed in rooms where the temperature can drop below 0°C.
Please ensure that when the washer is installed, it is easily accessible for the engineer in the event of a breakdown.
With the washer installed adjust all four feet using the transit bolt spanner provided ensuring the appliance is stable,
and a clearance of approximately 20mm is left between the top of the washer and the underside of the work-top.
impossible
BS
to avoid
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this apparatus may not
identifying the terminals in your plug, proceed as follows:
correspond
with the coloured
markings
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol
or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
6
nstallation
I
Electrical connection
1. Do not
use an
extension cord
or
double
adapter.
be replaced by the manufacturer
2. If the
3.
supply cord is damaged, it must
similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply after
4. Connect the machine to
5. The
?
?
?
appliance
must be
an
that the
so
plug
is
easily
its service
agents
or
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
Repairs to the washing machine must only be carried out qualified personnel. Repairs carried out by
inexperienced persons may cause injury or serious malfunctioning. Contact your local service center
Do not install your washing machine in rooms where temperatures below freezing may occur. Frozen hoses
may burst under pressure. The reliability of the electronic control unit may be impaired at temperatures below
freezing point.
If the appliance is delivered in the winter months and temperatures are below freezing : Store the washing
machine at room temperature for a few hours before putting it into operation.
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit
which powers only that appliance and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions
could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have
the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched,
closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where
the cord exits the appliance.
Washing Machine
is to be connected to the water mains
using
new
hose-sets and that old
hose-sets should not be used.
Connecting
water
supply hose
▶Water supply pressure
must
be between 30kPa and 1000kPa
(0.3~10kgf/cm2)
▶Don't strip or crossthread when connecting Inlet hose to the valve.
▶If the water supply pressure is more than 1000kPa, a decompression
device should be installed.
?
Two rubber seals
are
?
Hose connector
?
Rubber seal
?
in order to
are
supplied
prevent
with the water inlet hoses these
water leaks.
Check water tightness of washing machine connections by
turning the tap completely on.
Periodically check the condition of the hose and replace the hose
if necessary.
Make sure that there is
no
kink
on
the hose and that it is not
crushed.
Hot water tap
Cold
Cold
Hot(option)
water
tap
▶When your washer has two valves.
The Inlet hose which has red connector is for the hot water tap.
If the washer has two valves, the energy is saved by using hot
?
?
valve.
7
nstallation
I
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
screw
2. Push the
rubber
with
type inlet hose
3. Push the
connector up till the
packing is
supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
in
tight contact
the tap. Then tighten the 4
screws.
Normal Tap without thread &
1. Untighten the upper
connector
screw.
Upper
Rubber
Connector
Fixing
screw
packing
one
touch type inlet hose
2. Push the upper connector up
the rubber packing is in tight
contact with the tap. Then
tighten the 4 screws.
Middle
Rubber
connector
till
water
(Single
3. Connect the
water
inlet
models)
supply hose
to the middle connector,
pushing the plate down.
Upper
Connector
packing
Plate
Upper
?
In
the diameter of the tap is
remove the guide plate.
Connector
case
large
Guide
Water
Middle
hose
connector
plate
Turn the middle connector not
?
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
supply
To separate the water supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
kinks in the hose and that it is
not crushed.
Square tap
8
are no
nstallation
I
This
equipment
is not
designed
for maritime
use or
for
use
mobile installations such
as
caravans, aircraft etc.
if the machine is to be left for any length of time
if there is no floor drain(gully) in the immediate vicinity.
Turn off the
stopcock
especially
When disposing
of the
appliance,
cut off the mains
(e.g. holiday),
cable, and destroy the plug Disable the
door lock to prevent young children being trapped inside.
Packaging material (e.g. Films, Styrofoam) can be dangerous for children. There is
a
risk
of suffocation !
Keep
all
packaging
well away from children
Installation of drain hose
about 100
about 145
cm
cm
?
max.10cm min.60cm
about 105
cm
?
When
installing the drain hose sink,
secure it tightly with a string.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
Laundry tub
about 100
cm
Hose
about 145
Retainer
cm
Tie
100cm
min. 60cm
max.
about 105
?
?
?
cm
The drain hose should not be
m
a
x
.
1
0
c
m
min.60cm
100cm
min. 60cm
max.
strap
placed
higher than 100 cm above the floor.
Proper securing of the drain hose will
protect the floor from damage due to
water leakage.
When the drain hose is too long, do
not force back into the washer. This
will
cause
abnormal noise.
9
nstallation
I
Level
adjustment
1.
Adjusting
the
washing
machine level
excessive
properly prevents
noise and vibration.
Install the
corner
appliance
of the
solid and level floor surface,
suspended type flooring
or
excessive vibration and unblance
insert
adjust the adjustable
pieces of wood etc. under the feet)
Make
sure
that all four feet
are
then check that the
NOTE
a
washer is
appliance
level, tighten
may contribute to
feet
as
required. (do
In the
is
resting on the floor and
perfectly level. (use a spirit level)
of the
washing machine is installed
platform, it must be securely fastened in order
to eliminate the risk that it might fall off.
case
not
stable and
the lock nuts up towards
the washer. All lock nuts must be tightened.
After the
in
errors.
2. If the floor is uneven,
※
preferably
room.
Timber
NOTE
on a
that the
base
on a
of
raised
Diagonal Check
When pushing down the edges of the washing machine top plate diagonally, the machine
should not move up and down at all. (Please, check both of two directions)
If machine rocks when pushing the machine top plate diagonally, adjust the feet again.
Concrete floors
?
The installation surface
?
Install washer
Tile floors
on a
clean, dry and level.
flat hard floor.
on
sections and stick the
Tread Mate is
※
be
(Slippery floors)
Position each foot
?
must
a
the Tread Mate and level the machine
pieces
on
to
the
to suit.
dry tile where machine is to
(Cut Tread
be
Mate into 70x70
placed.)
self adhesive material used on ladders & steps that prevents
slipping.
Wooden floors
?
?
(Suspended floors)
Wooden floors are particularly susceptible to vibration.
To prevent vibration we recommend you place rubber cups
at
?
If
least 15mm thick under the
possible
install the washer in
washer, secured
one
of the
corners
※
Insert the rubber cups to reduce vibration.
※
You
can
obtain the rubber cups
to at
Rubber
under each
foot,
least 2 floor beams with
of the
room,
screws.
where the floor is
(p/no.4620ER4002B) from
Cup
more
the LG spares
stable.
dept.
Important!
?
?
?
?
?
Proper placement and levelling of the washer ensure long,regular and reliable operation.
The washer must be absolutely horizontal and stand firmly in position.
under load.
The installation surface must be clean, free from floor wax and other lubricant coatings.
Do not let the feet of the washer get wet. If feet of the washer get wet, slipping may occur.
It must not "Seesaw"
10
across corners
mm
C
are
before
Before the first
Select
washing
washing
cycle (COTTON 60°C, add
without clothing.
a
This will
remove
a
half load of
allow the unit to wash
detergent)
residues from the drum that may have been left
during manufacturing.
Caring before washing
1. Care Labels
Look for
garment
2.
your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
label
on
Sorting
get the best results, Sort clothes into loads that can be washed with the same wash cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer can occur causing discoloration of white etc. If possible, do not wash heavily
To
soiled items with
lightly
soiled
Soil
one.
(Heavy, Normal, Light)
Color (White, Lights, Darks)
Lint (Lint producers, Collectors)
3.
Caring
before
Separate
Separate
clothes
according
to amount of soil.
white fabrics from colored fabrics.
Wash lint
producers and
separately.
lint collectors
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all
that
pockets
to make sure
empty. Items such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
as
both
your washer and your clothes.
?
Close
zippers, hooks and strings
make
sure
snag
?
on
that these items don't
other clothes.
Pre treat dirt and stains
a
little
to
by brushing
detergent dissolved
in water
onto stains like collars and cuffs to
help shift dirt.
11
dding
detergent
A
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
dosage
The
detergent should be used according to
instruction of the detergent manufacture.
the
max
?
If too
much
detergent is
recommended amount,
occur
used more than the
too
heavy load to the
malfunction)
main wash
()
Fabric
softener
Main wash
pre wash
()
only
?
()
U
?
Use powder
Adding
)
washer.
Detergent usage
MAX
MAX
125 ml
125ml
Full load
can cause
clothes.
Do not leave the fabric softener in the
detergent drawer for more than
(Fabric softener could harden)
?
?
2
days.
Softener will
automatically be added
during the last rinse cycle.
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
12
to
:
3/4 of the normal amount.
Minimum load
:
1/2 of full load.
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
Do not exceed the maximum fill line.
Overfilling
adjusted
Tips
Part load
?
may need to be
results, avoid oversudsing.
Fabric Softener
(
detergent only for the front
for water temperature, water hardness,
size and soil level of the load. For best
?PreWash+MainWashU
2.
washing result
motor. (Causing a
Detergent for
loading
?
can
and this will decrease the
or cause
Detergent for
many suds
Do not pour fabric softener
directly on the clothes
?
Detergent is flushed from the dispenser
the beginning of the cycle.
at
F
unction
Recommended
courses
according
Fabric
to the
Maximum
Proper
Program
Temp.
Time
in
Option
Type
Cotton
laundry type
Load
Minutes
Rating
100
Color fast gaments
(shirts, night dresses,
pajamas...)and lightly
soiled white
60˚C
(30˚C, 40˚C,
95˚C)
cotton(underwear...)
Eco
Laundry
in Cotton
same
Medic Care Rinse
type is the
Intensive
60˚C
Rinse+
Pre Wash
Rating
115
Crease Care
Synthetic Polyamide, Acryic,
Polyester
40˚C
Less than
(30˚C, 60˚C)
Delicate
Delicate
laundry
easily damaged
4.0
30˚C
(Cold, 40˚C)
kg
Less than
Intensive
3.0
70
kg
55
Rinse+
Hand Wash/ "Hand Wash"
Wool
marked delicate and
wool
Quick 30
laundry
Colored
which is
Laundry
lightly soiled
Cold
30˚C
Less than
3.0
(30°C, 40°C)
fast.
Medic Care Rinse
kg
50
Less than
2.0 kg
30
Less than
6.0 kg
140
Intensive
Baby Care Laundry
for infant
Rinse+
95˚C
(60˚C)
Medic Care Rinse
Crease Care
Crease Care
high effectiveness or more purity in rinse operation you can choose Medic Care Rinse
option.
Intensive : When washing heavily soiled laundry you can increase effectiveness by choosing "Intensive" option.
Program setting with "Intensive" option for test in accordance or in conformity with EN60456 and IEC 60456.
Pre Wash : If the laundry is heavily soiled, "Pre Wash" course is recommended. Pre Wash is available in
Cotton, Eco and Synthetic Program.
Rinse+: Used to introduce an additional rinse, which may assist in removing traces of detergent residue.
Crease Care : If you want to prevent crease, select Crease Care option.
13
:
For
H
ow
1. Cotton
to
washer
use
selected upon power
?
?
?
Press the
Press the
2. Manual
automatically
Power(
)
on.
button to start.
Start/Pause(
)
button.
?
?
Initial condition
-
-
Wash
:
main wash
Rinse
:
3 times
1000 rpm
-
-
14
) button
to start.
Select the conditions which you want to
use, by turning the program dial and
each button.
selecting the each conditions, please
refer to the page15~page20
[WD(M)-14380(5)TB]
[WD(M)-12380(5)TB]
[WD(M)-10380(5)TB]
Program : Cotton
Power(
For
?
Water temperature
Press the
pressing
-Spin:
1400 rpm
1200 rpm
Selecting
:
60˚C
Press the
Start/Pause(
) button.
H
(1)
(2)
(3)
(4)
to
ow
Button
Dial
:
:
use
washer
Power
(5)
(6)
(7)
(8)
Program
Button
:
Start/Pause
Button
:
Time
Delay
Button
:
Medic Care RInse
Button
:
Intensive
Button
:
Rinse+
Button
:
Pre Wash
(9) Button : Crease Care
(10) Button : Spin
(11) Child Lock
Option
3. Rinse+
Used to additional rinse, which may assist
in removing traces of detergent residue.
?
By selecting Rinse+ function,
?
?
time and the rinse water
the
By pressing
Option button, all
Option functions may be selected.
-
Medic Care Rinse
-
-
Intensive
-
-
Rinse+
Pre Wash
Crease Care
?
1. Medic Care Rinse
?
For
effectiveness
high
rinse operation you
Care Rinse option.
If
can
?
or more
can
If the
laundry
purity
course
Pre Wash is available in Cotton, Eco and
?
If you want to prevent crease, select this
button with spin speed.
The
laundry is heavily
option is effective.
By selecting
is effective.
with the
2. Intensive
?
"Pre Wash"
choose Medic
of Delicate and Hand
If the
heavily soiled,
Synthetic.
in
Wash/Wool.
?
is
5. Crease Care
be chosen in all
exception
increased.
4. Pre Wash
course
?
are
the rinse
required lamp
will
light up for identification.
soiled "Intensive"
the Intensive
option, the
extended, depending
wash time may be
on the program selected.
15
H
ow
to
use
washer
Spin
?
[WD(M)-10380(5)TB]
[WD(M)-12380(5)TB]
Spin Speed
program
?
as
is available
the
[WD(M)-14380(5)TB]
2. No Spin
1. Spin selection
?
By pressing the Spin button,
spin speed can be chosen.
according
to the
?
follows.
WD(M)-10380(5)TB
Cotton, Eco, Spin, Rinse+Spin, Synthetic,
Quick 30, Hand Wash/Wool, Baby Care
If
spin is selected,
after draining water.
no
the washer stops
-
3. Rinse Hold
RinseHold--NoSpin--400--600--800--1000
-
Delicate
?
RinseHold--NoSpin--400--600--800
?
-
-
-
Synthetic, Hand Wash/ Wool,
Baby Care
RinseHold--NoSpin--400--800--1000
Delicate
by pressing
the
repeatedly
this function leaves clothes in
spin
?
To
proceed through
to a drain or
spin,
once the rinse hold function is completed
using to program dial scroll to the required
program.
(Spin)
RinseHold--NoSpin--400--800
?
WD(M)-14380(5)TB
-
Cotton, Eco, Spin, Quick 30,
Rinse+Spin
RinseHold--NoSpin--400--800--1000--1400
-
-
Synthetic, Hand Wash/ Wool,
Baby Care
RinseHold--NoSpin--400--800--1000
Delicate
RinseHold--NoSpin--400--800
16
button
the machine; suspended in the water after
a rinse without entering into spin.
WD(M)-12380(5)TB
Cotton, Eco, Spin, Quick 30, Rinse+Spin
RinseHold--NoSpin--400--800--1000--1200
Is selected
The
required lamp
identification.
will
light
up for
H
ow
to
use
Water
washer
Child Lock
Temp.
If you choose to lock
the buttons on the
control
assembly to
prevent tampering this
function may be
selected.
1. Child Lock
?
Child Lock
can
be set
by pressing the Rinse+
button simultaneously.
button and Pre Wash
?
By turning
the
temperature
-
can
(About three seconds)
the water
Program Dial,
be selected.
Cold
-30˚C/40˚C/60˚C/95˚C
1. Water Temperature
?
?
Water temperature can be selected
according to the program.
The
required temperature lamp
for identification.
For the
more
refer to
the
detailed
will
light
?
When child lock is set, all buttons
inoperable
except power button.
To deactivate Child Lock system, press
Rinse+ and Pre Wash button simultaneously
again. (About
up
are
three
seconds)
information, please
page13.
?
To
change
to the desired program, whilst in
child lock mode.
1. Press both Rinse+ and Pre Wash
once
again. (About
three
together
seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button
again.
Change
the desired
program
?
The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child Lock works when
power is off.
17
to
ow
H
use
Time
1. Time
washer
Program
Delay
Delay
Preparing washing before starting
"Time Delay"
Turn on the water tap.
-
-
9 programs
?
-
laundry and close the door.
Place the detergent and fabric softener
-
in
-
Delay"
Lamp
?
Program
dial to select
?
the program you require.
Press Time Delay button and set the
light
up to indicate selected
When Start/Pause button is
pressed, the
Cotton program is automatically selected.
By turning the Program dial, the program is
-
desired time.
-
will
1. Program
Press Power button.
Turn the
to the
program.
How to set "Time
-
according
laundry type.
Load
the drawer.
?
available
are
selected in order of
Press the Start/Pause button.
Delicate
(":" blinks.)
--
Quick 30
Hand Wash/Wool
--
"
"Cotton
--
Eco
Rinse+Spin
Synthetic
--
--
--
Spin
--
--
Baby Care".".
?
If Time
pressed, "3:00" is
displayed. The maximum delayed time is
Delay
button is
19:00 hours and the minimum time is 3:00
Regarding to the laundry type for each program
Please refer to the page13.
hours.
?
time
?
of the button advances
Each
pressing
delay by one
To cancel the time
(
)
on
hour.
delay,
2. Course
-
press the Power
button.
?
Time
'expected time' from the
present to the completion of washing cycle
or selected process (Wash, Rinse, Spin).
Delay
According to
Eco
-
-
Delicate
-
is
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
may vary.
-
-
-
?
Cotton
-
30
Quick
Rinse+Spin
-
Baby Care
Synthetic
Hand Wash/Wool
Spin
ow
H
to
use
washer
Start/Pause
Power
1. Power
1. Start
?
?
This Start/Pause button is used to start
wash
cycle
or
pause the wash
cycle.
?
Press the Power button to turn power
and off
To cancel the Time
power button
?
?
If
temporary stop of wash cycle is
needed, press the Start/Pause button.
When in Pause, the power is turned off
automatically after 4 minutes.
?
at the end of the wash
When the Power button is
pressed,
the
for Cotton program. And
the other initial conditions as follows.
?
NB. The door will not open before 1 to 2
minutes when Pause is selected,
or
if the
2. Initial Program
2. Pause
?
Delay function,
should be pressed.
on
washer is
ready
So, if you
want to advance into the
washing cycle without changing the
program, just press the Start/Pause
button and then the washer will proceed.
cycle.
Initial program
[WD(M)-10380(5)TB]
Door Lock
-
Cotton
Program
/ Main wash /
Normal Rinse / 1000 rpm / 60˚C
[WD(M)-12380(5)TB]
-
Cotton
Program
/ Main wash /
Normal Rinse / 1200 rpm / 60˚C
[WD(M)-14380(5)TB]
?
Lights
whenever the door of the washer
is locked.
?
?
The door
can
be unlocked
by pressing
the
-
Cotton
Program
/ Main wash /
Normal Rinse / 1400 rpm / 60˚C
Start/Pause button to stop the washer.
The door can be opened after a short
delay.
19
H
ow
to
washer
use
Display
3. Completion of
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
1. Special function
?
4. Time left
"
?
?
delay is selected, it shows
remaining times to finish the selected
When time
the
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
program.
-
2. Self
diagnosis display
-
-
?
"
display
When child lock is selected, the
is displayed.
"
washing
If the machine encounters
operation,
displayed.
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
:
a
fault
during
the associated fault will be
-
Water pressure
sensing
:
Problem of
:
Door is not closed
:
Over load in motor.
:
Over load in motor.
overfilling
error
-
water
:
Water inlet trouble
:
Drainage
:
Unbalanced load
:
Water temperature trouble
-
-
-
?
trouble
If these error letters are displayed, please
refer to the troubleshooting page24 and
follow the guide.
20
-
by
manufacturer.
Cotton : around 1 hour and 40 minutes
Eco
:
around 1 hour and 55 minutes
Synthetic
:
around 1 hour and 10 minutes
Delicate : around 55 minutes
Baby Care
around 2 hours and 20 minutes
:
Hand Wash / Wool : around 50 minutes
Quick 30 : around 30 minutes
Rinse+Spin
Spin
:
:
around 18 minutes
around 13 minutes
The
washing time may vary by the
amount of laundry, water pressure,
temperature and other washing
water
conditions.
?
If
an
suds
unbalanced load is detected
or
if the
program operates, the
wash time may be extended.
removing
M
aintenance
Before
cleaning
the washer interior,
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
When
disposing
of the
cut off the mains
appliance,
door lock to prevent young children
being trapped
cable, and destroy the plug Disable the
inside.
The water inlet filter
"
-"
detergent
-
message will blink
error
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
The drain pump filter
The drain filter collects threads and small
Check
!
regularly that the
CAUTION
First drain
filter is clean to
using
any threads
or
the lower
Open
cap ( ) by using
cover
a
2.
draining
plug ( )
water
pull
the hose.
remove
whatever
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
this time
out
smooth
laundry.
running of your machine.
the drain and then open the pump filter to
coin. Turn the drain
to
ensure
left in the
objects.
Be careful when
1.
objects
use a
flowing
3. Remove any
At
vessel to prevent
to the floor. When
on
foreign
from the pump filter
cleaning,
After
( )
clockwise and insert the drain
)to
the
plug (
the pump filter
close the lower
open to the left.
( ).
turn the pump filter
water does not flow any more, turn
( )
material
original place.
cover
cap.
100
3
1
2
3
2
21
aintenance
M
Dispenser drawer
After
?
?
?
a
while
and fabric softeners leave
detergents
It should be cleaned from time to time with
a
a
deposit
jet of running
water.
If necessary it can be removed completely from the machine
downwards and by pulling it out.
To facilitate
cleaning,
in the drawer.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
The drawer
Detergent
can
be cleaned
?
also accumulate inside the
with
occasionally
washing
?
replace
the drawer and
continuously
clogs appliances,
build up in
and if it is not
the
washing
If you
run a
washing drum is made of Stainless steel, specks
articles (paper clips, safety pins) which have been left in
Although
The
which should
old toothbrush.
If you live in a hard water area, limescale may
seen and thus not easily removed.
metal
?
recess
drum
Over time the build up of scale
be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
The
?
recess
use
kept
places where
in check these may have to
of rust
can
be caused
or
bleaches, make
Descaler may contain chemicals that may
Remove any spots with
22
small
drum should be cleaned from time to time.
descaling agents, dyes
use
by
the drum.
sure
they
are
suitable for
washing
use.
Never
it cannot be
steel wool.
a
stainless steel
damage part
of your
cleaning agent.
washing
machine.
machine
aintenance
M
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
detergent.
Immediately wipe off any spills. Wipe
Try
water and a neutral non abrasive
warm
not to hit surface with
IMPORTANT: Do not
with
damp cloth.
sharp objects.
methylated spirits, diluents
use
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket and door glass.
Run washer
through
a
complete cycle using hot
water.
Repeat process if necessary.
NOTE
Remove hard water
deposits using only cleaners labeled
as
washer safe.
Cold condition
If the washer is stored in
an area
where
temperatures, follow these instructions
1. Turn off water
Plug
4. Add
to
may
occur or
prevent damage
moved in
freezing
to the washer:
supply tap.
2. Disconnect hoses from water
3.
freezing
electrical cord into
1gallon(3.8L)
a
supply and drain
water from hoses.
properly grounded electrical outlet.
of nontoxic recreational
vehicle(RV) antifreeze
into
an
empty wash drum.
Close the door.
5. Set
spin cycle and let washer spin for 1minute
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
remove
through
a
expelled.
dry the drum interior, and close the door.
dispenser drawer drain and dry excessive
8. Store washer in
9. To
to drain out all water.
an
water from the
compartments.
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent. Do
run
empty washer
not add wash load.
23
roubleshooting
guide
T
This
machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you contact your service provider.
washing
Possible Cause
Symptom
Rattling
clanking
and
?
noise
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is restarted, call your authorised
service centre.
Thumping
Vibrating
sound
noise
?
?
Heavy wash loads
a thumping sound.
If sound continues, washer is
probably
out of balance.
normal.
redistribute wash load.
Have all the transit bolts and
If not removed
packing
?
may produce
This is usually
been removed?
Are all the feet
the
Stop
and
during
installation. Refer to Installation
resting firmly
on
for
removing
guide
transit bolts.
Wash load may be unevenly
distributed in drum. Stop washer and
ground?
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose
are
loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe. Contact plumber
if necessary.
Too much
Oversudsing
detergent
or
unsuitable
detergent may cause excessive
foaming which may result in water
leaks.
Water does not enter
washer
or
?
it enters
slowly
Water
supply
is not
adequate
in
Check another tap in the house.
area.
?
?
?
Water
supply tap
completely open.
Water inlet
is not
hose(s)
are
The filter of the inlet
Fully
kinked.
hose(s)
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
?
24
slowly.
or
clogged.
or
?
drains
Drain hose is kinked
The drain filter is
clogged.
Clean and
straighten
Clean the drain filter
the drain hose.
roubleshooting
guide
T
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
be plugged in or connection
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse blown, circuit
breaker tripped,or a power
Reset circuit breaker
outage has occurred.
If
Do not increase fuse
problem
is
it corrected
?
Water
supply tap
is not turned
Turn
on
a
by
water
replace
capacity.
or
fuse.
circuit overload, have
a qualified electrician.
supply tap.
on.
Washer will not
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
must
begins to spin. The door
lock before spin can be
achieved.
Door does not open
Once started, the door can not be
opened for safety reasons.
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
amount of laundry, water
pressure, water temperature and
other usage conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
roubleshooting
guide
T
Possible Cause
Symptom
?
?
?
?
?
?
?
?
?
supply is not adequate in area
Water supply taps are not completely
Water
open.
Water inlet
hose(s)
are
hose(s)
Drain hose is kinked
or
are
clogged.
clogged.
clogged.
The drain filter is
Fully open tap.
Check the filter of the inlet hose.
Clean and
straighten the
Add 1
Load is out of balance.
balance the load.
The
Rearrange
spinning
appliance
has
an
imbalance
or
2 similar items to
load to allow proper
bath mat, both robe,
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
Water overfills due to the
faulty water
valve.
Close the water tap.
Unplug the power plug.
Call for service.
?
?
?
26
help
etc.) this system
may stop spinning or even interrupt the
spin cycle altogether.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry
to balance the load and repeat the spin
cycle.
(ex.
?
drain hose.
Clean the drain filter.
Load is too small.
detection and correction system. If
individual heavy articles are loaded
?
Check another tap in the house.
Straighten hose(s).
kinked.
The filter of the inlet
Solution
Water level
sensor
Over load in motor.
Over load in motor.
has malfunctioned.
and call for
T
of Warranty
erms
of your old
Disposal
appliance
1. When this crossed-out wheeled bin
product
it
means
the
product
is
symbol is attached to
covered by the European
a
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
disposal of your old appliance will help prevent
potential negative consequences for the environment and
3. The correct
human health.
4. For more detailed information about
disposal
of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
What Is Not Covered:
?
?
?
?
Service
If the
trips
to your home to teach you how to use the
product
is connected to any
voltage
If the fault is caused
by accident, neglect,
If the fault is caused
by
product.
other than that shown
misuse
or
on
the
rating plate.
Act of God.
factors other than normal domestic
use or use
in accordance
with the owner's manual.
?
?
?
Provide instruction
If the fault is caused
Noise
or
sound,
?
?
?
?
?
or
by pests
product
for
or
change
example,
the set-up of the
product.
rats or cockroaches etc..
example
water drain
sound, spin
warming beeps.
Correcting
the installation for
example, levelling
Normal maintenance which recommended
by
the
Replace
the owner's manual.
foreign objects / substances from the machine, including
filter for example, grit, nails, bra wires, buttons etc.
fuses in
or
correct house
Correction of unauthorized
Incidental
If this
consequential damage
appliance.
:
or
correct house
the pump and
plumbing.
repairs.
or
product
(Example
wiring
of drain.
product, adjustment
Removal of
with this
?
of
vibration that is considered normal for
inlet hose
?
on use
to
personal property
caused
by possible
defects
is used for commercial purpose, it is not warranted.
Public
places such
center, dormitory)
as
public bathroom, lodging house, training
If the
product is installed outside the normal service area, any cost of
transportation involved in the repair of the product, or the replacement
defective part, shall be borne by the owner.
of
a
27
Download PDF