LG | V-CD281NT | LG V-CD281NT Owner’s Manual

Model
Language
Page
Material
Date
Part No.
CK3
ENGLISH
16 PAGE
Color(cover/body)
2/2
Weight 100G
190*260
Size(W*H)
YUSONG
2007.02.14
Designer
MFL32930818 MANUAL,OWNERS
Description
Chage Record
No.
1
2
3
4
5
6
7
8
9
Change content
ECO No.
Date Designer Confirm
V-CD271NT*
V-CD271HT*
V-CD281NT*
V-CD281HT*
V-CD201NT*
V-CD201HT*
Table of contents
Safety Information.....................................................................................................3
How to Use.................................................................................................................4
Assembling cleaner ...............................................................................................................4
Using the cleaning head and Accessory Nozzles..................................................................6
Emptying the Dust Chamber .................................................................................................8
Operating the cleaner............................................................................................................9
Cleaning the Filter ................................................................................................................10
Cleaning the Exhaust Filter....................................................................................................11
User's Guide For Turbine Nozzle(Option) .............................................................................12
Troubleshooting.....................................................................................................................13
2
Safety Information
Please read the following information, which contains important instructions for
the use and maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
The appliance is not intended for use by young children or infirm persons without supervision.
Young Children should be supervised to ensure that they do not play with appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device,
the cord extension set on electrical portable outlet device must be positioned so that it is not subject to splashing
or ingress of moisture.
Do not use the appliance if the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service Centre.
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
Do not unplug by pulling on cord.
Use only LG's recommended filters.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
The application is not intended for use by young children or infirm persons without supervision.
Thermal protector: This vacuum cleaner has a special thermostat that protects the cleaner in
case of motor overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the
cleaner. Check the cleaner for a possible source of overheating such as a full dust chamber, a blocked
hose or clogged filter. If blockage or obstruction is located, remove and wait at least 30 minutes
before attempting to use the cleaner. After the 30 minutes period, plug the cleaner back in and
turn on the switch. If the cleaner still does not run, please contact your approved LG service centre.
3
How to Use Assembling Cleaner
2
Fit the large cleaning head into the end of the tube.
NT**
Spring latch
NE**
Telescopic
tube
HT**
HE**
1
4
The 2 position head
Telescopic tube (depending on model)
Push telescopic tube into nozzle outlet.
• Press the spring latch to release.
• Pull out the tube to the desired length.
• Release spring latch to lock the tube in
position.
• Push telescopic tube into hose handle firmly.
Head
Flexible Hose
HT**
HE**
NT**
NE**
Attachment Point
Button
3
Connecting the flexible hose
• Push the end of the head on the flexible hose
into the attachment point on the vacuum cleaner.
• To remove the flexible hose from the vacuum
cleaner, press on the button situated on the head,
then pull the head out of the vacuum cleaner.
CAUTION
• Suction power may be weakened when insignificant dusts
are sucked. In this case, clean the filter.
• Make the dust box empty if dusts are filled to the maximum
degree and then clean the filter when it becomes 5 times.
5
6
Pleat-shaped internal filter
Circle-shaped external filter
Dust chamber cap
Dust chamber cap
Dust chamber
Dust chamber
Button
Plate
User's Guide for Turbine Nozzle
(Feature not available in all countries)
Turbine brush nozzle
Air adjustment
Slide the air control lever to the right for
long pile carpet and to the left for short
pile carpet.
Cleaning turbine brush nozzle
Press the button on the rear side of the
nozzle to separate the air cover.
Use the dusting brush & crevice tool to
vacuum clean the brush and fan.
12
Troubleshooting
What to Do When Suction Performance Decreases
• Turn off the vacuum cleaner and unplug it.
• Check the telecsopic tube, flexible hose and cleaning tool for blockages or obstructions.
• Check that the dust chamber is not full. Empty if necessary.
• Check that the motor filter light is not on. Clean the motor filter, if necessary.
• Check that the exhaust filter is not blocked. Clean the exhaust filter, if necessary.
• If you are still experiencing problems, please contact your local service centre.
To locate your nearest service centre you can visit our web site www.lge.com.au
13
Notes
14
Notes
15
P/No.: MFL32930818
Download PDF

advertising