LG | VC7780CER | LG VC7780CER Owner’s Manual

VC7780CER
V-C7780CTV/CTU/CE/CEU
3828Fi3833J
Table of contents
Information for Your
Safety......................................................................................3
How to Use.................................................................................................................4
Assembling
Using
the
Emptying
the Cleaner ........................................................................................................4
cleaning
head and Accessories.............................................................................6
the Dust Chamber .................................................................................................8
Operation...............................................................................................................................9
Adjusting
Park
the Suction level ....................................................................................................9
System
..........................................................................................................................9
Cleaning
the Motor Filter / Air Cleaner ................................................................................10
Cleaning
the Dust Chamber ................................................................................................11
Cleaning
the Exhaust Filter .................................................................................................11
User's Guide for Sani Punch Vacuum Nozzle (Option).....................................................12
What to do if there is
something wrong
with your Vacuum Cleaner .................16
What to Do if your Vacuum Cleaner Does Not Work...........................................................16
What to Do When Suction Performance Decreases ...........................................................16
2
3828Fi3833J
Information for your
safety
Please read all the
following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not use the appliance If the mains lead is damaged or faulty.
If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
to avoid a hazard.
?
?
?
Important for
users
in the UK.
The wires in the mains lead of this
BLUE-neutral
appliance
BROWN
-
are
coloured in accordance with the
following code:
live
VERY IMPORTANT:
Neither wire is to be connected to the earth terminal of
If any other
type of plug is used, protect with
a
a
3
pin plug.
If
a
13 amp
plug is fitted,
a
13 amp BS 1362 fuse.
15 amp fuse at the distribution board.
appliances which come with mains lead and plug moulded on: the plug moulded
For replacement use a 13 amp BS 1362 fuse.
Only ASTA approved or certified fuses should be used.
The fuse cover/carrier must be replaced in the event of changing the fuse.
For
fit
on
to the cord
incorporates
a
fuse.
3
Assembling Cleaner
2
Fit the
large cleaning
head onto
the end of the tube.
Spring
NT**
latch
Telescopic
tube
CE**
CT**
1
Nozzle outlet
Large cleaning
head
Telescopic
Push the head onto the
?
telescopic tube.
Press the
tube
spring latch
to
release.
?
Pull out the tube to the desired
length.
?
?
Release
spring latch to lock
the tube in position.
Push telescopic tube into hose
handle until catch clicks.
4
3828Fi3833J
Head
Flexible Hose
Attachment Point
Button
3
Connecting
the hose to the cleaner
Push the end of the head
into the attachment
To
remove
pull
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
on
the button situated
the head out of the
vacuum
cleaner.
vacuum
on
the
head,
cleaner.
5
3828Fi3833J
Using
the
Tear the
cleaning
head and Accessories
vinyl bag
and
pull
out accessories.
Attach the accessory holder into the side hole of
And then, Fit the
Dusting
body.
Brush & Crevice Tool and
Upholstery
Nozzle onto the accessory holder.
Fit the accessory onto the end of the tube.
Upholstery nozzle
Dusting brush
& Crevice tool
1
2
Upholstery
Nozzle
Dusting
Upholstery Nozzle is for
vacuuming upholstery,
frames, furniture frames, books and other
mattresses, etc.
hard surfaces.
The thread collectors
Crevice Tool is for vacuuming in those
normally hard-to-reach places such as
help
to
The
Brush & Crevice Tool
pick up
the threads and fluff.
dusting Brush is for vacuuming picture
reaching cobwebs,
of
6
3828Fi3833J
a
sofa.
or
between the cushions
2
1
(Refer
to
Page 6)
(See below)
3
5
4
3
(See below)
6
(Refer to Page 10)
(Refer to Page 12-15)
4
Pedal
CE**
Head
Spring
latch
Spring
latch
3
Large cleaning
head
4
Elbow tube
(CE**)
?
?
?
The 2
position cleaning head is
equipped with a pedal which allows
you to alter the brush position
according to the type of floor to be
Elbow tube is for
cleaning under the
sofa, table and bed easily.
?
Connect the elbow tube to the
cleaned.
flexible hose and, connect the
telescopic tube to the elbow tube.
Hard floor
(You
position(tiles, parquets floor)
Press the pedal to lower brush.
Carpet or rug position
Press the pedal to use the brush.
can
also connect the
telescopic
tube to the flexible hose without the
elbow
?
If
tube.)
you pull the spring latch, the elbow
tube
?
can
be bent.
If you stretch the elbow
returned to its position.
tube, it is
7
3828Fi3833J
Emptying
the dust chamber
The dust chamber needs
emptying
reaches the MAX indicator
the dust tank.
on
when dust
?
Turn off the
?
Press the button of the
?
vacuum
cleaner and
cover
unplug it.
and pull the dust
chamber out.
Remove the dust chamber cap and empty the dust chamber.
To reinstall the dust chamber, replace the dust chamber cap and
push
the dust chamber into the tank mount
8
3828Fi3833J
as
far
as
it will go.
Operation
On/Off button
Cable reel button
Key pad
1
3
2
POWER CONTROL
OFF
AUTO
MIN
MAX
BOOSTER
Hose handle
Min
Auto
Max
Booster
Operation
?
?
?
Park
the Suction level
Pull out the power cord to the
desired length and put plug into the
?
Adjust the power by using the power
control switch in the handle.
socket.
?
When you press the button that you
desire, the light comes on.
Press On/Off button to start the
vacuum
?
Adjusting
?
cleaner.
To stop it, press On/Off button again.
Press the cable reel button to retract
the power cord after
use.
To store after
vacuuming and
pause while vacuuming.
-
If you press the Auto button, the power
is automatically adjusted by the amount
of dust.
?
?
-
-
push
Do not press the max button more
than five times continuously.
Continuously booster working, the
motor temperature is in creased.
When you have finished
vacuuming, use the Park
System
to
support the flexible
hose and
-
When you want to use the booster,
the max button twice.
System
cleaning head.
Slide the hook on the large
cleaning head into the slot on
the handle of the dust chamber.
9
3828Fi3833J
Cleaning
The
permanent
cap.
When the filter
motor filter is situated under the dust chamber
light
comes on
?
Press the button of
?
Open
?
?
the Motor Filter/Air cleaner
cover
the motor filter
and
pull
requires cleaning.
the dust chamber out.
the dust chamber cap.
Remove the motor filter by rotating it counter-clockwise.
Clean the motor filter with the brush under cold
running
water.
?
?
Allow the motor filter to
dry naturally,
WARNING!
Gently
runs
separately
clear. Hand wash
Shake off
Do not
excess
tumble/spindry,
microwave
Re-assemble and
place
drying.
10
3828Fi3833J
running
water until the water
water from the filter.
completely dry.
the motor filter should
under cold
only with damp cloth.
Ensure the filter is
be cleaned every 6 months.
The spare motor filter must be used while the other motor
filter is
rinse both parts
or
place
in
oven or on
it back in your machine, filter frame.
direct heat.
Cleaning
the Dust Chamber
Cleaning
the Exhaust Filters
2
1
3
Open
the dust chamber cap.
Remove two
plates
from
the dust chamber.
?
The exhaust filter is
?
To clean the exhaust
filter,
the filter
cover on
body by rotating
the filter
cover
a
the
washable reusable HEPA filter.
counter-clockwise.
?
Pull out the exhaust filter.
?
Clean it with
Do not
?
use
remove
cold, running
the brush
Allow exhaust filter to
water.
this will
damage
dry completely in a
as
the filter.
shaded
location.
?
Wash both
parts with soft cloth.
Gently rinse both parts under cold running
The exhaust filter should be cleaned at least
a
once
year.
water.
11
3828Fi3833J
User's Guide for Sani Punch Vacuum Nozzle
Features
This nozzle
How to
picks up
The bottom part
can
even
be
dust inside
separated
use
Follow the directions below for proper
through beating.
(Option)
use.
to be cleaned.
Since the bottom does not stick to the surface,
vacuuming is easy.
Assembly
Connect the nozzle to the
telescopic tube.
Use
Set the suction power control switch to MAX POWER before vacuuming.
Depending on the type of bedding, handling may be awkward or it may cause
If this is the case,
If the
adjust the suction power control switch
punch bar does
If it does not move,
not move, lift the nozzle
even
after
to a lower
a
lot of noise.
setting.
slightly off the surface.
doing this, check
if the suction power is too low
12
3828Fi3833J
or
if the nozzle base is
clogged
with
a
foreign object.
This Sani Punch nozzle is for effective
Effective
cleaning of beds and blankets
to remove mites and dust.
cleaning
Bed & blanket
Bulky & heavy blanket
Light blanket & sheet
When
using
on
Lay
out the blanket
and
vacuum
it
on
the bed
the bed
When
using
It is easier to clean
a
on
the floor
light blanket
or
sheet
by pushing the nozzle in the direction of the arrow.
To increase cleaning efficiency for light blankets,
lay on top of a bulky blanket and then clean.
13
3828Fi3833J
User's Guide for Sani Punch Vacuum Nozzle
For
simple cleaning of the
vacuum
and attach the crevice tool to
Cleaning Vacuum
Nozzle for
nozzle, detach the Sani Punch nozzle from the telescopic tube
vacuum
dust.
Bottom
Top
Since the vibrator inside is composed of precision parts, never disassemble the body.
Be careful not to let foreign objects clog the air suction part on top of the vacuum nozzle.
Since removal of the punch bar may cause performance problems, do not warp or remove it.
Attach the bottom plate properly before using. Without this bottom plate, it may not function.
Since this
vacuum
nozzle has been made
exclusively for cleaning beds, blankets and upholstery,
it
only for these cleaning purposes.
(Using it to clean the floor may result soiling
use
it
or a
drop
in
performance, do
14
3828Fi3833J
not use it for such
purposes.)
Bedding (Option)
Follow the instruction below for
(Do
not soak the entire
through washing.
body of the
vacuum
nozzle in water, it may
cause
the vibrator to
malfunction)
Bottom
Bottom
Punch bar
plate
plate
Punch bar
Press the button
rear
side of the
on
the
vacuum
nozzle to separate the
bottom plate.
Straighten
on
Wipe all the soiled parts
Wash the removed bottom
of the
plate
body
the
punch bar
the lower section.
vacuum
with
a
nozzle
with water and
dry
it.
cloth.
Insert the attachment
Push down the tabs
projections on bottom
plate to the vacuum nozzle
to secure.
grooves.
15
3828Fi3833J
What to do if there is
something wrong
with your
Vacuum Cleaner
What to Do if Your Vacuum Cleaner Does Not Work
Check that the
vacuum
cleaner is
plugged
in
correctly
and that the electrical socket is
working.
What to Do When Suction Performance Decreases
?
Turn off the
?
Check the
?
Check that the dust chamber is not full.
?
Check that the motor filter
?
Check that the exhaust filter is not
vacuum
cleaner and
telecsopic tube,
it.
unplug
flexible hose and
light
is not
cleaning tool for blockages
Empty if necessary.
or
obstructions.
filter, if necessary.
blocked. Clean the exhaust filter, if necessary.
on.
Clean the motor
WARNING!
Should it become necessary to
replace
the moulded
plug
then the detective
16
3828Fi3833J
plug
should be
replaced by
a
qualified
electrician.
Notes
17
3828Fi3833J
Notes
18
3828Fi3833J
3828Fi3833J
P/No.: 3828Fi3833J
3828Fi3833J
Download PDF