LG | VCA701HER | LG VCA701HER Owner’s Manual

V-CA701H**
VCA701H**
CYKING
3828Fi2846P
Table of contents
Information for Your
Safety......................................................................................3
How to Use.................................................................................................................4
Assembling
the Cleaner ........................................................................................................4
Using
the
Using
the elbow
Emptying
Cleaning
head and
pipe
and
Accessory
Nozzles .................................................................6
cleaning carpet
master .................................................................8
the Dust Chamber .................................................................................................9
Operation.............................................................................................................................10
How to
Plug
Adjusting
in and Use .......................................................................................................10
the Suction power ................................................................................................10
Park-System ........................................................................................................................10
Storage ................................................................................................................................10
Cleaning
the Motor Filter, Air Cleaner and the Dust Chamber ............................................11
Cleaning
the Exhaust Filter .................................................................................................12
What to Do if your Vacuum Cleaner Does Not Work ................................................13
What to Do When Suction Performance Decreases..................................................13
2
3828Fi2846P
Information for Your
Safety
Please read all the
following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not allow it to use as a toy, injury could result.
Do not continue to the cleaner if any appears to be faulty, missing or damaged.
In these cases, contact an approved LG Electronics Service Agent.
Repairs, when necessary, must be performed at an approved LG Electronics Service Agent.
Only use parts produced or recommended by LG doing otherwise could invalidate your guarantee.
Do not
use
without the dust tank
Do not
use
the
vacuum
or
air filter.
cleaner If the power cord is
damaged or faulty.
replaced by an approved LG Electronics
If the power cord is
Do not
damaged, it must be
unplug by pulling on cord.
pull on the supply cord, run over it, pull
Do not
Always turn the vacuum cleaner off
Emptying the dust chamber.
Cleaning or changing the filter.
Romoving from the mains outlet.
Do not leave
use
the
Do not
put any
Do not
use
Do not
vacuum
sharp
Do not
Do not
or
to avoid
a
hazard.
near/over hot surfaces.
before:
cleaner with the
clsaner.
outdoors.
hot
ash, embers
etc.
sharp objects.
vacuum flammable or explosive substances(liquids
vacuum water or other liquids.
handle the cleaner or plug with wet hands.
Do not
edhes
Agent
plug connected to a mains outlet-unplug when not in use.
vacuum with any of the openings blocked with any object that may restrict the airflow.
part of the body, colthes or any object (e.g. stick) or into the opening or moving parts of the
vacuum
Do not
it around
Service
or
or
gases).
Do not immerse the whole cleaner in water.
Do not
repaired if it was under water.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
The appliance is not intended for use by young children or infirm persons without supervision.
Young children should be supervised to ensure that they do not play with the appliance.
use vacuum
cleaner without
Thermal
protector: This vacuum cleaner has a special thermostat that protects the cleaner in case of motor overheating. If the
cleaner suddenly shuts off, turn off the switch and unplug the cleaner. Check the cleaner for a possible source of overheating
such
as a
before
full dust
attempting
chamber,
to
use
still does not run, contact
Important
for
users
a
blocked hose
clogged
filter. If these conditions
the cleaner. After the 30 minutes
a
qualified
period, plug
are
found, fix them and wait
the cleaner back in and turn
on
at least 30 minutes
the switch. If the cleaner
electrician.
in the UK.
The wires in the mains lead of this
BLUE-neutral
or
appliance
BROWN
-
are
coloured in accordance with the
following
code:
live
VERY IMPORTANT:
Do not earth the
appliance If a 13 amp plug is fitted, fit a 13 amp BS 1362 fuse.
If any other type of plug is used, protect with a 15 amp fuse at the distribution board.
For appliances which come with mains lead and plug moulded on: the plug moulded on to
For replacement use a 13 amp BS 1362 fuse.
Only ASTA approved or certified fuses should be used.
The plug must not be used if the fuse cover/carrier is lost.
A replacement cover carrier must be obtained from authorised electrical goods retailers.
the cable
incorporates
a
fuse.
3
3828Fi2846P
How to Use
Fit the
large cleaning
Assembling
the Cleaner
head onto the end of the tube.
Elbow tube
Spring
2
latch
(Optional)
1
●
NZ-50
●
NZ-46
(Optional)
Large cleaning
head
Push the head onto the
telescopic
(Optional)
Telescopic
?
tube.
Press the
tube
spring
latch to
release.
?
Pull out the tube to the desired
length.
?
?
4
3828Fi2846P
Release
spring latch to lock
the tube in position.
Push telescopic tube into hose
handle firmly.
Button
Flexible Hose
Attachment Point
Head
3
Connecting
the hole to the cleaner
Push the end of the head
into the attachment
To
remove
pull
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
on
the button situated
the head out of the
vacuum
cleaner.
vacuum
on
the
head,
cleaner.
5
3828Fi2846P
How to Use
Using
the
Cleaning
head and
Accessory
Nozzles
When the accessory holder is to be connected to the hose.
Hold the hose and
push
the holder at the desired
position
of the hose.
Upholstery
Dusting
Crevice tool
2
1
Upholstery
Nozzle
Dusting
Brush
Dusting Brush is for
vacuuming picture frames,
mattresses, etc.
furniture
The thread collectors
other
to
pick
up
the threads and fluff.
6
3828Fi2846P
brush
3
Upholstery Nozzle is for
vacuuming upholstery,
help
nozzle
frames, books and
irregular
surfaces.
Crevice Tool
Crevice Tool is for
vacuuming in those
normally hard-to-reach
places such as reaching
cobwebs,
or
cushions of
between the
a
sofa.
1
2
3
4
5
6
(Optional)
●
Cleaning carpet
7
(Optional)
8
(Optional)
and floor nozzle
4
5
Pedal
The 2
position
head
Hard
Floor
Nozzle
(Optional)
?
The 2
position cleaning
equipped with a pedal which allows
you to alter its position according to
the
?
?
head
type of floor
?
Open
the
cover
by pulling
?
Divide the nozzle into two
?
Clean the hole of the nozzle.
the hook.
?
Efficient cleaning of hard
floors (wood, linoleum, etc)
parts
to be cleaned.
Hard floor
position
(tiles, parquets floor)
Press the pedal to lower brush.
Carpet or rug position
Press the pedal to lift the brush
up.
7
3828Fi2846P
How to Use
Using
the elbow
Cleaning
6
pipe
and
cleaning carpet
master
Powerful Turbine Brush
7
Pile
Adjustment
Long Carpet
2
Spring
latch
1
Open
Short
Open
Carpet
Top
Spring
latch
Bottom
Elbow tube
Carpet master(Optional)
(Optional)
?
?
the window
Open
Open
the
cover
by pulling
the hook.
at the bottom
by pulling
the hook.
Elbow tube is for
sofa, table and
?
cleaning under the
bed easily.
Connect the elbow tube to the
?
Clean the brush.
flexible hose
?
Clean the brush and hole at the bottom.
?
Slide the Pile
telescopic tube to the elbow tube.
(You can also connect the
telescopic tube to the flexible hose
without the elbow tube.)
If you pull the spring latch, the
long carpet
Adjustment
to the
right
for
and to the left for short
carpet
?
and,
connect the
elbow tube is bended.
?
8
3828Fi2846P
If you stretch the elbow
returned to its position.
tube, it is
Emptying
the Dust Chamber
Dust chamber cap
Button
Button
Bottom
plate
Dust chamber
The dust chamber needs
emptying
reaches the MAX indicator
the dust chamber.
on
when dust
?
Turn off the
?
Press the button of the
vacuum
cleaner and
cover
unplug it.
and pull the dust
chamber out.
Remove the dust chamber cap and empty the dust chamber.
Push the button, then dust will fell down as the button plate is
?
open.
To reinstall the dust
push
chamber, replace the dust chamber cap and
the dust chamber into the tank mount
as
far
as
it will go.
CAUTION
?
Suction power may be weakened when
are sucked. In this case, clean the filter.
?
Make the dust box
degree
empty if dusts
are
insignificant
dusts
filled to the maximum
and then clean the filter when it becomes 5 times.
9
3828Fi2846P
How to Use
Operation
2
1
Cord reel button
3
Suction control switch
4
FLOOR
MAX
CARPET
SOFA
CURTAIN
OFF
MIN
How to
Plug
in
and Use
?
and
?
Park
Adjust the power by using
the power control switch on
?
System
Storage
?
When
this
lamp
is
on
To store after
vacuuming
?
vacuuming.
For deposit
vacuuming,
after
Press the cable reel
which
button to retract the
chamber is
power cord after
the dust chamber.
furniture
or a
Once you
the Park
system
use.
?
means
this
it
the dust
full, pls empty
in
plug
lamp will
an
be
outlet,
on
and
generates fresh ion('-' ion)
automatically.
to
move a
3828Fi2846P
?
for
example
small piece of
rug,
to
and
-
cleaning
Slide the hook
on
large cleaning
head
into the slot
the
on
vacuum
the
rear
cleaner.
unplugged.
The appliance,
press
the button to
automatically
rewind
the cord.
?
head.
When you have
switched off and
on
use
support the flexible hose
of the
10
?
and pause while
the handle.
put plug
into the soctet.
?
the Suction
power
Pull out the power
cable to the desired
length
Adjusting
You
can
store your
appliance in a vertical
position by sliding the
hook on the large
cleaning head into the
clip on the underside
of the appliance.
Cleaning
the Motor Filter / Air cleaner and the Dust Chamber
Light
Button
The
permanent
cap.
When the filter
motor filter is situated under the dust chamber
light
comes on
the Motor Filter
?
Press the button of
?
Open the dust chamber cap.
Cleaning the Motor Filter.
Remove the motor filter by rotating
?
cover
-
-
-
?
and
pull
requires cleaning.
the dust chamber out.
Gently
runs
rinse both parts
Do not
it counter-clockwise.
dry naturally.
Cleaning the Dust Chamber.
Remove two plates from the dust chamber.
Wash both parts with soft cloth. Gently rinse
under cold running water.
separately
clear. Hand wash
Shake off
Clean the motor filter.
Allow the motor filter to
WARNING!
excess
cold
running
water until the water
water from the filter.
microwave
Ensure the filter is
completely dry.
Re-assemble and
place
Please call
a
only with damp cloth.
tumble/spindry,
If the filter is
under
or
place
in
oven or on
direct heat.
it back in your machine, filter frame.
damaged, do
the Helpline.
not
place them
in the machine.
-
-
both
parts
11
3828Fi2846P
How to Use
the Exhaust Filter
Cleaning
?
The exhaust filter is
?
To clean the exhaust
?
Pull out the exhaust filter.
?
Clean it with
?
Allow exhaust filter to
?
The exhaust filter should be cleaned at least
a
washable reusable HEPA filter.
filter,
cold, running
remove
the filter
water. Do Not
dry completely
in
12
3828Fi2846P
a
cover on
use
the
the brush
body by rotating
as
this will
shaded location for
once
a
year.
a
the filter
damage
dry.
cover
the filter.
counter-clockwise.
What to Do if Your Vacuum Cleaner Does Not Work
Check that the
vacuum
cleaner is
plugged
in
correctly
and that the electrical socket is
working.
What to Do When Suction Performance Decreases
?
Turn off the
?
Check the
?
Check that the dust chamber is not full.
?
Check that the exhaust filter is not blocked. Clean the exhaust
vacuum
cleaner and
telecsopic tube,
it.
unplug
flexible hose and
cleaning tool for blockages
Empty if necessary.
or
obstructions.
filter, if necessary.
WARNING!
Should it become necessary to
replace
the moulded
plug
then the detective
plug
should be
replaced by
a
qualified
electrician.
13
3828Fi2846P
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
is attached to
symbol
a
product
it
means
the
product
is covered
by
the
European
Directive
designated
collection
2002/96/EC.
2. All electrical and electronic
facilities
should be
appointed by the government or the
3. The correct
4. For
products
more
disposal
of your old
appliance
detailed information about
shop where
you
purchased
14
3828Fi2846P
the
disposed
of
separately
from the
municipal
waste stream via
local authorities.
will
disposal
product.
help prevent potential negative
of your old
appliance, please
consequences for the environment and human health.
contact your
city office,
waste
disposal
service
or
the
Notes
15
3828Fi2846P
P/No.: 3828Fi2846P
3828Fi2846P
Download PDF