LG | VF5718CNC | LG VF5718CNC Owner’s Manual

VF5720***/VF5718***
Model
Language English
22 2/1
Page
Color(cover/body)
145*215
100g
Material
Size(W*H)
2009/01/08
Date
LIU GUANG QUAN
Designer
Part No.
MFL56848301
Description
MANUAL,OWNERS
Chage Record
No.
1
2
3
4
5
6
7
8
9
Change content
ECO No.
Date Designer Confirm
Upright Vacuum Cleaner
Owner's Manual
MODEL: VF5720 * * *
VF5718 * * *
PLEASE READ THIS MANUAL
THOROUGHLY AND CAREFULLY BEFORE
OPERATING THE VACUUM CLEANER
P/No.: MFL56848301
TABLE OF CONTENTS
INFORMATION FOR YOUR SAFETY..................................................3-4
PARTS AND FEATURES ........................................................................5
TELESCOPIC HANDLE RELEASE ........................................................6
CORD RELEASE ....................................................................................6
SWITCH OPERATION ............................................................................7
BODY RELEASE AND POSITIONS ........................................................7
RECOMMENDED PILE HEIGHT SETTINGS .........................................7
ATTACHMENT USE CHART ..................................................................8
VACUUMING TIPS .................................................................................8
ATTACHMENTS ......................................................................................8
PERFORMANCE FEATURES...............................................................10
VACUUM CLEANER CARE...................................................................11
Vacuum Storage .......................................................................................................11
Dust bin assembly.....................................................................................................11
Dust bin cleaning ......................................................................................................12
Filters cleaning / changing ........................................................................................13
Belt Changing and Agitator Cleaning........................................................................14
Cleaning exterior.......................................................................................................16
Removing clogs ........................................................................................................16
TROUBLESHOOTING ..........................................................................17
-2-
INFORMATION FOR YOUR SAFETY
Please read all the following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not allow it to use as a toy, injury could result.
Do not continue to the cleaner if any appears to be faulty, missing or damaged.
In these cases, contact an approved LG Electronics Service Agent.
Repairs, when necessary, must be performed at an approved LG Electronics Service Agent.
Use only parts produced and recommended by LG. Otherwise, it could invalidate your warranty.
Do not use without the dust bin or air filter.
Do not use the vacuum cleaner If the power cord is damaged or faulty.
If the power cord is damaged, it must be replaced by an approved LG Electronics Service Agent to avoid a hazard.
Do not unplug by pulling on cord.
Do not pull on the supply cord, run over it, pull it around sharp edges or near/over hot surfaces.
Always turn the vacuum cleaner off before:
• Emptying the dust bin.
• Cleaning or changing the filter.
• Removing from the mains outlet.
Do not leave vacuum cleaner with the plug connected to a mains outlet-unplug when not in use.
Do not use the vacuum with any of the openings blocked with any object that may restrict the airflow.
Do not put any part of the body, clothes or any object (e.g. stick) or into the opening or moving parts of the cleaner.
Do not use outdoors.
Do not vacuum hot ash, embers etc. or sharp objects.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum water or other liquids.
Do not handle the cleaner or plug with wet hands.
Do not immerse the whole cleaner in water.
Do not use vacuum cleaner without repaired if it was under water.
When you vacuum with an attachment appliance that has a rotating brush roller:
• Do not reach into the running brush roller.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
If the appliance is supplied from a cord extension set or an electrical portable outlet device, the cord extension set
on electrical portable outlet device must be positioned so that it is not subject to splashing or ingress of moisture.
Do not vacuum fine dust.
Do not expose vacuum cleaner to heat.
Do not hold the dust bin handle when you move the vacuum.
- If you push the dust bin release button, the dust bin might be separated from the vacuum.
And then the alarm sounds after the vacuum turns off.
- You should hold the carry handle when you move the vacuum.
Carry handle
Dust bin
release button
Dust bin
handle
-3-
INFORMATION FOR YOUR SAFETY
Thermal protector: This vacuum cleaner has a special thermostat that protects the cleaner in case of motor
overheating. If the cleaner suddenly shuts off, turn off the switch and unplug the cleaner. Check the cleaner for a
possible source of overheating such as a full dust chamber, a blocked hose or clogged filter. If these conditions are
found, fix them and wait at least 30 minutes before attempting to use the cleaner. After the 30 minutes period, plug
the cleaner back in and turn on the switch. If the cleaner still does not run, contact a qualified electrician.
Important for users in the UK.
The wires in the mains lead of this appliance are coloured in accordance with the following code:
BLUE-neutral
BROWN - live
VERY IMPORTANT:
Do not earth the appliance If a 13 amp plug is fitted, fit a 13 amp BS 1362 fuse.
If any other type of plug is used, protect with a 15 amp fuse at the distribution board.
For appliances which come with mains lead and plug moulded on: the plug moulded on to the cable
incorporates a fuse.
For replacement use a 13 amp BS 1362 fuse.
Only ASTA approved or certified fuses should be used.
The plug must not be used if the fuse cover/carrier is lost.
A replacement cover carrier must be obtained from authorised electrical goods retailers.
-4-
PARTS AND FEATURES
It is important to know your vacuum cleaner’s parts and features to assure its proper and safe
use. Review these before using your cleaner.
Telescopic handle
Switch
Carry handle
Dust bin release button
Dust bin cover button
Dust bin
Nozzle hose
Height adjustment
knob
Telescopic
release lever
Exhaust filter
Quick release
cord hanger
Dusting brush
Crevice tool
Mini nozzle
(Option: ONLY VF5720***)
Body release
pedal
Cord hook
Motor protector
-5-
TELESCOPIC HANDLE RELEASE
Release the telescopic handle by pulling
telescopic release lever up with fingers and pulling
up the telescopic handle.
Telescopic
handle
To lower the telescopic handle pull the telescopic
release lever up with fingers and push down on
the telescopic handle.
Telescopic
release lever
Note : For your convenience, adjust telescopic
handle height properly to your height.
CORD RELEASE
Turn the quick release cord hanger to either side
to release the power cord.
To store the power cord, wrap the power cord
around the quick release cord hanger and hook,
and clip the plug onto the power cord with cord
holder.
Quick
release
cord hanger
Cord
holder
Cord
hook
Plug shape:
NORTH AMERICA
UK
AUSTRALIA
-6-
EU
ISRAEL
SWITCH OPERATION
Switch operation
• Off
• Floor: Hard floors (Agitator off)
• Carpet: Agitator on
WARNING
Personal injury hazard
To avoid personal injury, do not turn switch
On/Off if the vacuum or your hand is wet.
BODY RELEASE AND POSITIONS
Release the vacuum body by pressing down on
the body release pedal with your foot and
pulling back and down.
Body release pedal
RECOMMENDED PILE HEIGHT SETTINGS
To select a pile height setting :
Turn off cleaner first. Select a pile height setting
by using height adjustment knob.
Rotate the adjustment knob to the correct
setting position.
Suggested pile height settings :
You may need to raise the height to make some
jobs easier, such as scatter rugs and longer pile
carpets.
For easiest adjustment, place cleaner in full
upright position.
Attention: Special care is required when
vacuuming certain types of carpet or floor
covering. Always check the carpet or floor
covering manufacturer's recommended
cleaning instructions before vacuuming.
Height adjustment
knob
-7-
ATTACHMENT USE CHART
ATTACHMENT
CLEANING AREA
Furniture*
Between
Cushions*
Drapes*
Stairs
Walls
X
X
X
X
X
DUSTING
BRUSH
CREVICE
TOOL
X
X
X
MINI NOZZLE
(Option: ONLY
VF5720***)
X
X
X
* Always clean attachments before using on fabrics.
* The attachments are subject to change according to the buyer's request.
VACUUMING TIPS
Carpet edges
WARNING
Use attachments such as crevice tool, dusting
brush, Mini-nozzle on carpet edges.
See page 8, 9
Personal Injury Hazard
Use care if vacuum cleaner is placed on
stairs. If it falls, personal injury or property
damage could result.
ATTACHMENTS
To use attachments
1) Place the cleaner on a flat surface.
Remove the wand off the body by grasping and rotating while pulling up.
2) Set pile height to high
3) Place switch in "Floor" mode.
-8-
Dusting brush:
Functions as a dusting brush,also an upholstery
nozzle which is useful for furniture, shelves etc.
Attach as shown.
Mini-nozzle (option)
Mini-nozzle is attached as shown and used for
stairs and other hard to reach places.
To remove Mini-nozzle cover:
Remove 2 screws on the bottom and take Mininozzle cover off as shown.
Crevice tool:
Crevice tool is attached as shown and used for
corners, between cushions etc.
Press
Frequently check and remove hair, string, and
lint build-up the brush area. Failure to do so
could cause damage to Mini-nozzle.
To extend wand:
Rotate the wand to unlock and pull.
Lock
Unlock
Note : For added reach the dusting brush can be
used with crevice tool as shown.
Pull
CAUTION
Do not pull the vacuum cleaner around
the room by the hose. Property damage
could result.
TO STORE ATTACHMENTS
Return the wand to its position on the body and
the attachments to their holders.
-9-
PERFORMANCE FEATURES
Motor protector
Thermal protector
This vacuum has a motor protector bypass
valve which automatically opens to provide
cooling air to the motor when a clog prevents
the normal flow of air to the motor. If the bypass valve opens to prevent motor overheating
and possible damage to the vacuum, you will
notice a change of sound as air rushes through
the valve opening.
This vacuum has a thermal protector which
automatically trips to protect the vacuum from
overheating. If a clog prevents the normal flow
of air to the motor the thermal protector turns
the motor off automatically to allow the motor to
cool in order to prevent possible damage to the
vacuum.
NOTE: Do not block motor protector.
To correct problem: Check for and remove
clogs. See CLOG REMOVAL section.
NOTE: The motor protector may open when
using attachments or when cleaning new
carpet, due to reduced airflow caused by the
attachments themselves or by new carpet fiber
filling the dust bin quickly.
To correct problem: If this occurs, turn the
vacuum off and unplug the power cord from the
outlet to allow the vacuum to cool.
Check for and remove clogs, if necessary.
Wait approximately thirty(30)minutes and plug
the vacuum in and turn back on to see if the
motor protector has reset. The thermal
protector system will not reset untill the vacuum
has cooled down.
Motor protector
-10-
VACUUM CLEANER CARE
Always follow all safety precautions when cleaning and servicing the vacuum cleaner.
WARNING
Electrical shock and personal injury hazard.
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so
could result in electrical shock or personal injury from cleaner suddenly starting.
VACUUM STORAGE
To store the vacuum cleaner when it is not
used, assemble its cord and return its
telescopic handle to its lower space saving
position.
WARNING
Electrical shock and personal injury
hazard.
Wrapping the cord too tightly puts
stress on the cord and can cause
cord damage. A damaged cord is an
electrical shock hazard and could
cause personal injury or damage.
DUST BIN ASSEMBLY
Dust bin lid
The dust bin lid covers up the dust bin.
Dust bin lid
Air filter
The air filter the fine dust from dust bin.
Inner shield
The inner shield traps large dirt and debris
that is picked up by the suction.
Dust bin
Where dirt is collected.
Air filter
Inner shield
Dust bin
-11-
DUST BIN CLEANING
For best performance always empty the dust bin
when the dust is full.
WARNING
Dust bin cover
Electrical shock and personal injury
hazard.
Dust bin
cover button
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Note : When replacing the dust bin in the vacuum
you need to push and snap it. Make sure
that dust bin is fully engaged otherwise
suction power could be low.
When the alarm sounds, check the dust bin.
If the dust bin is full, empty the dust bin.
TO CLEAN DUST BIN remove catch on dust bin
cyclone and separate the inner shield from the
dust bin cover as shown.
Inner shield
Dust bin
cover
Catch
UN
CK
LO
LOC
K
TO REMOVE DUST BIN, push the dust bin
release button and pull the bin out of cleaner.
Do not use wet dust bin and inner shield.
When reuse, dry completely.
Dust bin release button
TO EMPTY DUST BIN, push the dust bin cover
button as shown, separate the dust bin cover
from the dust bin and remove dust.
-12-
Clean dust bin cover with a cloth and brush to
remove fluff or debris. And DO NOT USE ANY
LIQUID AND WATER.
FILTERS CLEANING / CHANGING
Filter cover button
Filter frame
OPEN
Filter
Dust bin cover
Press the filter cover button and separate the
filter frame and the filter from the dust bin cover
as shown.
Clean the filter frame and the filter in cold water
only. DO NOT USE DETERGENT OR SOAP.
Allow exhaust filter to dry 24 hours in the shade
before putting it back. Make sure that the filters
dry completely.
FOR OPTIONAL PERFORMANCE, CHECK
FILTERS FREQUENTLY AND CLEAN WHEN
DIRTY.
Let filter dry for 24 hours in the shade before
putting it back.
CAUTION
Wet filter can cause permanent
damage to cleaner.
Ensure that all filters dry completely.
TO CLEAN EXHAUST FILTER
Remove exhaust filter from vacuum and clean
the filter in cold water only. DO NOT USE
DETERGENT AND SOAP.
The cycle of the cleaning.
• Air filter - Every 2 months.
• Exhaust filter - Once a year.
-13-
BELT CHANGING AND AGITATOR CLEANING
Check and remove hair, string, ad lint build-up
in the agitator brush area. To replace nozzle
bottom plate, should regulation be placed in its
place and reinstall things you removed.
WARNING
Electrical shock and personal injury
hazard.
Disconnect electrical supply before
servicing or cleaning the unit. Failure
to do so could result in electrical
shock or personal injury from cleaner
suddenly starting.
Hook
Frequently check and remove hair, string, and
lint build-up in the agitator brush area. If buildup becomes excessive, follow the steps below.
Should the belt become loose or should it
break, follow the belt removal instructions.
NOZZLE BOTTOM PLATE
REMOVAL / INSTALLATION
WARNING
Personal injury hazard
Disconnect electrical supply, press body
release pedal and rotate body down, so the
cleaner is laying flat on the floor.
Always unplug the vacuum cleaner
before cleaning the brush area as
agitator may suddenly restart. Failure
to do so can result in personal injury.
To protect the floor surface place paper under
the nozzle and work area.
Remove 4 screws from the bottom as shown.
Remove the bottom plate as shown.
TO REMOVE BELT /
CLEAN AGITATOR
Position hands on opposite ends of the agitator.
If the belt is still attached to the agitator, there will
be tension on it.
Carefully lift the right end of the agitator and
then lift the other end.
Remove the worn or broken belt from the motor
drive shaft and clean the agitator.
Belt
Agitator
-14-
To seat agitator right end, pull both end of
agitator forward and seat it into nozzle base.
Remove string or hair that may be wrapped
around the agitator.
WARNING
To seat agitator left end, put left end of
agitator into slot in nozzle base as shown.
Be careful when removing the
agitator as the belt tension is high.
Failure to do so could result in
personal injury from the agitator
releasing quickly and snapping away.
TO REPLACE BELT
Seat the right end of agitator into nozzle
base.
Press firmly, checking to see that each end
is completely inserted. And then turn agitator
making sure that belt turns freely and is not
pinched between agitator and agitator shield.
Loop the new belt on the motor shaft.
Loop the other end of belt onto the belt
pulley on the left end of agitator.
To replace the nozzle bottom plate, follow
the NOZZLE BOTTOM PLATE REMOVAL /
INSTALLATION section.(Page 14)
-15-
CLEANING EXTERIOR
Unplug power cord from wall outlet. Clean
exterior using a clean, soft cloth that has been
dipped in a solution of mild liquid detergent and
water and wrung dry.
DO NOT drip water in the cleaner.
DO NOT clean tools in dishwasher or clothes
washer. Wash tools in warm soapy water, rinse
and air dry.
DO NOT use tools if they are wet.
REMOVING CLOGS
The hose located on the vacuum cleaner
carries the dirt from the nozzle up to the dust
bin. If the hose should become clogged :
Check the base of the hose for clogging as
shown.
Unplug vacuum. Remove the assembled wand,
nozzle hose and check them.
Check suction inlet and filters for clogs.
Check suction
inlet
Pull
Pull
Nozzle hose
Check dirt inlet
Check suction inlet
of nozzle
Note : Clogged filters can cause suction power to
be low. To clean the filter, refer to FILTERS
CLEANING / CHANGING section.
(Page 13)
-16-
TROUBLESHOOTING
Review this chart to find do-it-yourself solutions for a minor performance problems. Additional
service needed, other than those described in this owner's manual, should be performed at an
authorized LG Electronics Service agency.
WARNING
Electrical shock and personal injury hazard.
Disconnect electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury.
PROBLEM
POSSIBLE CAUSE
POSSIBLE SOLUTION
CLEANER WILL
NOT RUN
1. Unplugged at wall outlet.
2. Switch in off position.
3. Thermal protector activated.
1. Plug in firmly, check Motor protection system / fuse.
2. Push switch to floor or carpet mode.
3. See "To correct problem", page 9.
POOR DUST
COLLECTION
1. Full or clogged dust bin.
2. Broken agitator belt.
3. Clogged hose or nozzle.
4. Hose not inserted fully
5. Worn agitator.
6. Hole in hose
7. Dust bin assembly improperly
installed.
8. Belt not installed on motor shaft.
9. Motor protection system
activated.
1. Empty dust bin and clean the filters.
2. Replace agitator belt.
3. Clean hose or nozzle area.
4. Insert hose.
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly.
1. Dust bin assembly improperly
installed.
1. Properly install dust bin.
DUST ESCAPES
THE DUST BIN
1. The dust bin is full.
SWITCH ON,
2. The rotating blade in the dust
MOTOR
bin is restricted by an obstacle.
TURNS OFF AND
3. The dust bin is in the wrong
THE ALARM
position.
SOUNDS
8. Install belt on the motor shaft.
9. Check for clogs.
1. Turn off the vacuum and empty the dust bin.
2. Turn off the vacuum and remove the obstacle
from the dust bin.
3. Turn off the vacuum and reattach the dust bin in
the correct position.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product
it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
-17-
Note
-18-
Note
-19-
Note
-20-
Download PDF

advertising