LG | VC717HSL | LG VC717HSL Owner’s Manual

Model
ずぇuotがじh ずぇuouがじh ずぇuotがしh ずぇuouがしh
Language
pn
Page
Material
Date
Part No.
Chage
No.
1
2
3
4
5
6
7
8
9
ぉげかぐきしが
Color(cover/body)
pmp
Size(W*H)
ptnhownぱぱ
pnnslntlpu
Designer
そべ
qvpvおきqvqqか
Description
こほひどぶeぷ けづひべづば
Weight
onnに
しびひに
Record
Change
content
ECO No.
Date
Designer
Confirm
VC716HT*
VC717HT*
VC716HS*
VC717HS*
Table of contents
Information for your
How to
use
the
How to
...........................................................................................
head and
the dust chamber
Operation
Adjusting
cleaner
cleaning
Emptying
Accessory
the power level
plug
in and
use
...................................................................................
......................................................................................
....................................................................................................
the motor filter / Air Cleaner
Cleaning
the dust chamber
Cleaning
the exhaust filters
guide
Features
Cleaning
....................................................
.................................................................................
Cleaning
User's
Nozzles
........................................................................................................
Park-System
for sani
...................................................................
..................................................................................
...............................................................................
punch
vacuum
nozzle
...................................................
.........................................................................................................
Vacuum Nozzle for
What to do if your
appliance
What to do when the suction
2
...............................................................................
.......................................................................................................
Assembling
Using
safety
Bedding
..................................................................
does not work
performance
...........................................................
reduces?
...............................................
3
4
4
6
8
9
9
9
9
10
11
11
12
12
14
16
16
Information for your
safety
Please read all the
following information, which contains important instructions for the safety,
the use and the maintenance of the appliance.
This appliance complies with the following EC Directives: -73/23/EEC,
93/68/EEC-Low Voltage Directive-89/336EEC -EMC Directive.
Never allow children to use the appliance unsupervised.
Do not use the appliance If the mains lead is damaged or faulty.
If the mains lead is damaged, it must be replaced by an approved LG Electronics Service Agent to
Always switch the vacuum cleaner off before:
Emptying the dust chamber.
Cleaning or changing the filters.
Do not vacuum flammable or explosive substances(liquids or gases).
Do not vacuum hot ash, embers etc. nor sharp objects.
Do not vacuum water or other liquids.
When you vacuum with an attachment appliance that has a rotating brush roller:
Do not reach into the running brush roller.
avoid
a
hazard.
?
?
?
Important
for
users
in the UK.
The wires in the mains lead of this
BLUE-neutral
appliance
BROWN
-
are
coloured in accordance with the
following
code:
live
VERY IMPORTANT:
Neither wire is to be connected to the earth terminal of
If any other
For
type of plug is used, protect with
a
a
3
pin plug.
If
a
13 amp
plug
is
fitted, fit
a
13 amp BS 1362 fuse.
15 amp fuse at the distribution board.
appliances which come with mains lead and plug moulded on: the plug
For replacement use a 13 amp BS 1362 fuse.
Only ASTA approved or certified fuses should be used.
The fuse cover/carrier must be replaced in the event of changing the fuse.
moulded
on
to the cord
incorporates
a
fuse.
3
How to
Fit the
use Assembling
large cleaning
Cleaner
head onto the end of the tube.
2
1
Nozzle outlet
1
The 2
position head
(Depending on model)
Push
telescopic tube into
nozzle outlet.
4
2
Telescopic
Push
tube
telescopic tube into hose
handle until catch clicks.
Attachment Point
3
Button
Head
Flexible Hose
3
Connecting
the flexible hose
Push the end of the head
into the attachment
To
remove
pull
on
the flexible hose
the
vacuum
the flexible hose from the
cleaner, press
then
point
on
on
the button situated
cleaner.
vacuum
on
the
head,
forward.
5
How to
Open
use Using the cleaning
the accessory
Fit the
cleaning
cover
and
pull
head and
Accessory
Nozzles
out accessory you want.
head onto the end of the tube.
1
2
3
1
Nozzle
Upholstery
Dusting
brush & Crevice Tool
frames, furniture outlines, books and other
mattresses, etc.
uneven
The thread collectors
Crevice Tool is for
to
pick
up
the threads and fluff.
Dusting
Brush is for
3
Upholstery Nozzle is for
vacuuming upholstery,
help
6
2
Brush is for
vacuuming picture
objects.
vacuuming in those
normally inaccessible places i.e.
reaching cobwebs, or down the side of
Brush
a
sofa!
motor filter.
cleaning
(Air cleaner)
1
3
2
4
4-1
4-2
5
4-3
Head
6
Spring latch
6
5
4
Pedal
Head
Head
4-1
Head
4-2
Pedal
4 4-1 4-2 4-3
?
4-3
Pedal
Large cleaning head
(Depending on model)
The 2
position heads equipped
with a pedal which allows you to alter
its position according to the type of
Pedal
5
Sani
punch
(Optional)
Refer to
Page
nozzle
12~1
.
6
Adjusting the telescopic
tube length
Telescopic tube
?
?
Pull out tube to
Release
required length.
spring latch.
floor to be cleaned.
?
?
Hard floor
position
(tiles, parquets floor)
Press the pedal to lower brush.
Carpet or rug position
Press the pedal to lift the brush up.
7
How to
use Emptying
the dust chamber
Button
dust chamber
The dust chamber needs
reaches
emptying
MAX, which is marked
on
when the dust
the dust chamber.
?
Turn off the
appliance and unplug it.
appliance is equipped with both
?
Your
the dust chamber
and the motor filter.
Press the button of the
?
cover
and
the dust chamber forward.
Remove the dust chamber cap and empty the dust chamber.
To refit the dust chamber, push the dust chamber
into the tank mount until it will go
8
pull
no
further.
Operation
Regulator
1
2
3
FLOOR
MAX
CARPET
SOFA
CURTAIN
OFF
MIN
Cord reel button
1
Adjusting
?
?
the power level
power with the power
control switch in the handle.
Adjust
Push power lever to start the
vacuum cleaner.
?
To
?
Push power lever to start the
vacuum cleaner.
?
To
stop it pull the power lever.
stop it pull the power lever.
2
How to
?
plug
in and
use
Pull out the mains lead to
the desired
length
and
plug
Depress
into
System
For
pausing while vacuuming, for
example to move a small piece of
furniture
the cord reel lever to
retract the power cord after
Park
?
the socket.
?
3
use.
system
and
-
or a
to
rug,
use
the Park
support the flexible hose
cleaning
head.
Slide the hook attached to the
cleaning
rear
head into the slot
of the
on
large
the
appliance.
9
How to
use Cleaning
the motor filter/Air cleaner
The motor filter is situated under the tank cap and does
not need to be changed.
Each time the
light
on, clean the motor filter with
comes
water and brush and then
replace
it in the
vacuum
cleaner.
?
Press the button of
cover
and
pull
the dust chamber
forward.
?
?
Open the tank cap.
Separate the motor filter by rotaing
?
Dry
motor filter at least
10
it counter-clockwise.
Clean the motor filter with the brush under
a
day.Even
once
if the
rinse both parts
water runsclear.
separately
Do not
or a
Gently
light
every 6 months.
a
running tap.
is not on, wash
use
detergent
under
washing
a
cold
machine
running tap
or
until the
dishwasher.
Your filter may discolour with use, however this will not affect its
filtration efficiency.Shake off excess water from the filter.
Do not
?
it in shade for
WARNING!
tumble/spindry, microwave or place in oven or on direct heat.
Ensure the filter is completely dry.
Re-assemble and place it back in your machine, filter frame.
If the filter is damaged, do not place them in the machine.
Please call the Helpline.
Cleaning
Cleaning
the dust chamber
the exhaust filters
Plate
dust chamber
1
2
Filter
cover
Wheel
3
Tank cap
1
Open
the tank cap.
2
Remove two
plates
from
?
the dust chamber.
?
The exhaust filter is
so
you
can use
To
change
cover on
the filter
cover
parts with soft material.
Gently rinse both parts
under a cold running tap.
permanently.
the
filter,
counter-clockwise.
Pull out the exhaust filter.
?
Clean it with water.
use a
brush.
cause
permanent damage
allowing dust to by-pass
?Dryitinshadeforaday.
?
remove
body by rotating
?
-This will
Wash both
washable HEPA filter.
the exhaust
the filter
Do not
3
it
a
the filter.
We advise you to clean it at least
once a
year.
11
User's
guide
for sani
punch
How to
Features
This nozzle
The bottom
picks up
part can
even
be
dust inside
separated
through beating.
nozzle
vacuum
use
Follow the directions below for proper
use.
to be cleaned.
Since the bottom does not stick to the
surface, vacuuming is easy.
Assembly
Connect the nozzle to the
telescopic
tube.
Use
Set the suction power control switch to MAX POWER before vacuuming.
Depending on the type of bedding, handling may be awkward or it may cause
If this is the case,
If the
adjust
the sunction power control switch to
a
lower
lot of noise.
setting.
bar does not move, lift the nozzle slightly off the surface.
If it does not move, even after doing this, check if the suction power is too low
12
a
punch
or
if the nozzle base is
clogged
with
a
foreign object.
This Sani Punch nozzle is for effective
Effective
cleaning
of beds and blankets to
remove
mites and dust.
cleaning
Bed & blanket
Bulky
When
using
on
Lay
out the blanket
and
vacuum
it
on
the bed
the bed
&
heavy
When
blanket
Light
using
on
It is easier to clean
by pushing
a
blanket & sheet
the floor
light
blanket
or
sheet
the nozzle in the direction of the
arrow.
To increase
lay
on
cleaning efficiency for light blankets,
top of a bulky blanket and then clean.
13
User's
For
for
sani
guide
simple cleaning
of the
vacuum
and attach the crevice tool to
punch
vacuum
nozzle
Cleaning
Vacuum Nozzle for
nozzle, detach the Sani Punch nozzle from the telescopic tube
vacuum
dust.
Bottom
Top
Since the vibrator inside is
composed of precision parts, never disassemble the body.
Be careful not to let foreign objects clog the air sunction part on top of the vacuum nozzle.
Since removal of the punch bar may cause performance problems, do not warp or remove it.
Attach the bottom plate properly before using. Without this bottom plate, it may not function.
Since this
vacuum
nozzle has been made
exclusively
only for these cleaning purposes.
(Using it to clean the floor may result soiling
use
14
for
cleaning beds,
blankets and
upholstery,
it
it
or a
drop
in
performance,
do not
use
it for such
purposes.)
Bedding
Follow the instruction below for
(Do
not soak the entire
body
through washing.
of the
vacuum
nozzle in water, it may
cause
the vibrator to
malfunction)
Bottom
1
2
plate
3
Punch bar
Bottom
4
plate
6
5
Punch bar
1
Press the button
rear
side of the
nozzle to
bottom
on
2
the
Wipe
of the
vacuum
separate the
body
all the soiled
vacuum
with
a
parts
3
nozzle
Wash the removed bottom
plate
with water and
dry
it.
cloth.
plate.
4
Straighten
on
the
punch
the lower section.
bar
5
Insert the attachment
projections on bottom
plate to the vacuum nozzle
6
Push down the tabs
to
secure.
grooves.
15
What to do if your
Check that the
appliance
is
appliance
correctly plugged
in and that the electrical socket is
What to do when the suction
the
appliance
and
unplug
does not work
performance
working.
reduces?
it.
?
Stop
?
Check that the
?
Check that the dust chamber is not full.
?
Check that the
?
Check that the exhaust filter is not blocked.
tubes, flexible hose and cleaning tool.
light
is not
on
if necessary.
because of motor filter's blockage.
Empty
Clean the filter.
.
WARNING!
Should it become necessary to replace the moulded on plug then the detective
any possible shock hazard that could occur should such a plug be inserted into
16
plug
a
should be
destroyed
to avoid
13 amp socket elsewhere in the house.
Note
17
Note
18
P/No.: 3828FI3833G
Download PDF

advertising