LG | LD-12BW5 | LG LD-12BW5 Owner’s Manual

600mm
600mm
850mm
Capacity
12 Place
Dimension
600x600x850mm(WxDxH)
Weight
54
Power
Supply
See
rating
label
Power
Consumption
See
rating
label
Water Feed Pressure
P/No.: 3828ED7001F
settings
kg
50~800kPa
DISHWASHER
OWNER'S MANUAL
MODEL
:
LD-12BW5 / LD-12BS6 / LD-12BT7
Please read this manual
carefully
before
operating your
dishwasher. Retain it for future reference.
CONTENTS
SAFETY AND CAUTION
3
INSTALLATION INSTRUCTION
4
PARTS NAME
8
FUNCTION OF CONTROL BUTTON
9
HOW TO USE AND OPERATE
10
WASH OPTIONS
16
PROGRAMS
17
CHECK AND CARE
18
TROUBLE SHOOTING GUIDE
19
SPECIFICATIONS
SAFETY AND CAUTION
IMPORTANT SAFETY INSTRUCTIONS
WARNING
?
Please read this manual
using
?
?
-
using your dishwasher, follow
including the following:
When
carefully before
?
the dishwasher for the first time.
This manual contains very important notes
regarding the installation, use and
maintenance of your dishwasher.
The manufacturer can not be responsible
?
for
?
problems caused by ignoring these
safety and caution instructions.
This dishwasher is designed for normal
household
?
?
Do not
?
the dishwasher for industrial
safety
is
rating label.
only guaranteed
cable
?
or
?
not
use an
?
extension
cord.)
?
Only suitable household utensils should
placed in the dishwasher. (Please avoid
temperature
65˚C,
?
?
?
Keep detergents away from children.
If the hot water exceeds 65˚C, adjust the
water heater
setting.
can
?
If the hot water
not be maintained
disturbance
on
its
This
appliance must be positioned so that
plug is accessible.
Controls may be locked using "child lock"
mode to prevent from starting dishwasher
accidentally.
The appliance is not intended for use by
or
infirm persons without
supervision.
Young children should be supervised to
ensure that they do not play with the
appliance.
Do not insert anything such as coin into
the dishwasher must be connected
parts and noise.
to cold water.
?
use any kinds of solvent in your
dishwasher. They may cause an explosion
or fire.
Do not expose skin to vapor vent.
During operation, as hot steam may scald.
?
Dishwasher
Do not
Do not spray water on the appliance. It
may cause the failure of electric parts or
Do not allow children to
Do not
push
down
or
sit
away from the dishwasher when the door
is open.
Check that the detergent receptacle is
operate the
on
detergents are strongly
They can be extremely
dangerous if swallowed. Avoid contact
with skin and eyes and keep children
alkaline.
dishwasher.
?
the
the vapor vent.
It may cause the failure of mechanical
below
electric shock.
?
automatically stops
young children
utensils; that are non-heartresistant, metal
decorated, etc.)
?
person in order to avoid a hazard.
This appliance is fitted with a safety
the
when
be
?
washing.
The detergent for dishwasher should be
used for normal operation.
If power supply cord is damaged, it must
only be replaced by the manufacturer or
its service agent or a similar qualified
mains.
the earth system of your house is in
accordance with the related local
regulations. (Do
detergent for hand
operation
exposed to heavy
and commercial use, or other purpose.
Electrical connection must be in
Electrical
the
precautions,
of the dishwasher when it is
accordance with the
?
use
function that
use.
use
Do not
basic
the inner door
empty after completion of the wash cycle.
when the door
opened. It may cause the
deformation or failure of your dishwasher.
?
The
appliance is to be connected
using new hose-sets
water mains
to the
and that
old hose-sets should not be reused.
3
INSTALLATION INSTRUCTION
Step1:
Step2:
PREPARE CUPBOARD OPENING
PREPARE ELECTRICAL WIRING
1
This dishwasher is
size shown
2
Select
a
as
designed to
CAUTION
fit to the
For
below.
location
as
close to sink
personal safety,
remove
house fuse
or
open circuit breaker before installation. Do not
use an extension cord or adapter plug with
as
this
possible for easy connections to water and
drain lines.
appliance.
Electrical and
grounding
comply with the national
code/provincial and municipal code
connections must
electrical
and/or other local codes.
3
The dishwasher should not be installed
more
than 3 meters from sink for proper
1
drainage.
This
appliance must be supplied with
rating voltage and hertz as shown
correct
4
If dishwasher is to be installed in
a
on
corner,
instruction manual, and connected to
minimum 5cm of space is required
between the washer and an adjacent
individual, properly grounded branch
circuit, protected by minimum 15 amp
cabinet
circuit breaker
a
or a
an
wall.
Wiring
2
or
must be 2
time
delay
wires with
fuse.
ground.
The power plug must be in a accessible
location adjacent to and not behind the
dishwasher and within 1.2 meters of the
dishwasher
3
600
820-870
Min.
75
Cut out for
hoses and electrical
cables on either side.
Unit:mm
If bare
chipboard
(appox.
is
adjacent
100
x
75)
to or above the
dishwasher, it should be sealed with a
waterproofing paint or sealant to prevent
swelling
due to steam.
4
Fig.A)
Electrician. No other
appliance
plug
should be connected to the
same
outlet
or
plug.
600-605
page 6
The power plug must be correctly
earthed, if in doubt, have it checked by a
qualified
100
side.(See
by
a
double
adapter
similar
INSTALLATION INSTRUCTION
Step3:
Step5:
PREPARE DISHWASHER FOR
INSTALL THE DISHWASHER IN
INSTALLATION
CUPBOARD
the dishwasher
1
Lay
2
Adjust
the
cabinet
as
legs
on
its back.
to the needed
shown in
figure
1
of
height
#1.
Before
sliding the dishwasher into the
cupboard opening, all necessary final
height adjustment and balancing
adjustment should be done using the
spanner.
2
Slide the dishwasher into the cabinet
opening carefully.
Adjust
kinked
screw
figure
#1
or
stretched.
600mm
Step4:
CONNECT DRAIN HOSE TO
DISHWASHER
1
820m
Turn the drain connector at the back of
dishwasher to drain direction
2
Connect the drain hose to the drain
connector
Make
sure
that the
drain hose inside the cabinet is not
tightly using
hose
clamp.
Water
Hose
supply
Clamp Drain
Hose
5
600~605mm
INSTALLATION INSTRUCTION
Step6:
DRAIN LINE CONNECTION
1
If the end of drain hose does not fit to
When the drain hose is connected to
the drain line,
separate stand pipe, it is essential that
air tight connection is made.
of rubber
piece
connector(not supplied) that must be
resistant to heat and detergent and may
be obtained from a plumbing shop.
2
There
are
shown in
use a
2
typical connections
Figure A, B.
Refer to
a
an
Fig.B
as
Air Tight
Connection
70mMin./1ax 30mMin.
The "S" trap spigot must be drilled out
cleanly and free of obstruction to its
maximum internal diameter, if used for
drainage.
To prevent siphoning, one of the following
instruction methods must be followed:
When the drain hose is connected to
Standpipe 40 mm
diametre min.
a
sink "s" trap or waste disposal unit, the
hose must be looped up to the underside
Fig.
of the bench top and secured.
B
:
Drainage connection
stand
pipe.
Drain Hose Extension
Extend Drain Hose
70mMin. 10 mMax.
-
Sink
200
mm
as
shown below.
Max.
Drain Hose
Inlet Hose
Copper pipe
30mMin.
Fig.
Power
Cord
30mMin.
A
Ø20mm flared
at drain hose
and other end
if required
70mMin./1ax
Drain hose extension or 16-20mm inside Ørubber
hose able to withstand 90˚C hot water
CAUTION
When you connect or extend Drain Hose,
make sure that drain hose is not kinked.
(Bends should have
6
40
mm
radius.)
INSTALLATION INSTRUCTION
Step7:
Step9:
WATER SUPPLY CONNECTION
HOW TO LEVEL THE PRODUCT
1
Connect the water
supply pipe
water valve behind dishwasher
shown in
2
to the
After
installing
hear
sticky
side portion
or
as
figure.
a
the
product, if you feel some
frictional sound between the
of door and tub when you open or
adjust the level of
close the door, you have to
product.
connecting, the sealing tape or
sealing compound should be used to
When
Case 1. In
case
the door is slanted to the
right
avoid water leaks.
Make
or
sharply
Slant to
that the line is not kinked
sure
the
bent.
Shut off Valve
right
DOOR
To Dishwasher
Fig.
?
C
If the door is slanted to the
right as shown in
procedure shown as
below until the door is operated normally.
1) Unscrew(counter-clockwise) the left leg of
back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there
figure C, repeat
?
the
do not remain slant, stickiness
sound.
Case 2. In
Step8:
case
or a
friction
the door is slanted to the left
FINAL CHECK AND
Slant to
ASSEMBLING
1
the left
DOOR
Securely hand tighten supply hose to
water supply.
Plug power supply cord into an
earthed the power plug and switch on.
Fig.
?
2
Operate the dishwasher through one
cycle (Quick cycle is recommended)
to check for water leak and operating
D
If the door is slanted to the left
as
shown in
figure D, repeat the procedure shown
as
below until the door is
operated normally.
the right leg
of back side and high the level.
2) Check the opening of door if there still
remains sticky or friction sound.
When the product is correctly leveled, there
1) Unscrew(counter-clockwise)
conditions.
?
7
do not remain slant, stickiness
sound.
or a
friction
PARTS NAME
6
1
12
7
16
20
8
2
13
17
3
9
14
4
18
10
5
15
19
11
11.
Adjust Leg
2. Control Panel
1.
12.
Upper
3. Door Handle
13.
Cutlery
4. Front Cover
14.
Detergent
5. Lower Cover
15.
Vapor Vent
6. Process Monitor
16.
Upper Spray
7. Power Switch
17. Lower
8. Inlet valve ASM
18. Filter ASM
Vapor
vent
Rack
Rack
& Rinse Aid
Dispenser
Cover
Spray
Arm
Arm
9. Drain Hose Connector
19. Lower Rack
10. Power Cord
20. Salt Container
Cap
Accessories
Inlet Hose
Drain Hose
8
Funnel
FUNCTION OF CONTROL BUTTON
?
DELAY START
REMAINING
HALF &
POWER SWITCH
BUTTON
TIME
INTENSIVE+
BUTTON
If you want to delay
the start of selected
?
?
the
delay
will increase time
remaining
Self diagnosis
and
start button.
Pressing
?
time
program, press this
button before pressing
?
Indication of
time
on), lower
The
can
message
display
washing(Upper and
Lower lights on
together) can be
start time
delay
adjusted from
?
and intensive+
by
be
rack
?
hour to 19 hours.
In
case
?
automatically
safety
and energy saving.
If case of irregular surge
disturbances to the
machine, the power may
of small load
washing,
use
lower rack
?
button
switches off for
selected.
1
operating, press this
button first for power on.
After operating, this
For
?
only(Lower light on)
error
1 hour.
?
With each press, upper
rack only(Upper light
upper
only
or
be
automatically
safety.
turned
off for
to save
energy.
In case you want
powerful washing, use
Intensive+ washing
option with main
program.
PROGRAM
CHILD LOCK
?
Used to lock
or
unlock
the control buttons to
When power is on,
program is
prevent all the setting
automatically
from
normal.
being changed by
children.
?
?
For
locking/unlocking,
press Delay Start and
Program button
simultaneously.
START/PAUSE
RINSE/SANI
set to
?
With each
press the button and
set the program you
want to.
9
?
press, rinse+,
rinse+ & 77 C
sani rinse,
?Ifyouwantto
change the program,
BUTTON
With each press, Start
and Pause is repeated
during operation.
?
If the machine remains
77 C sani rinse
in Pause mode for 10
is
minutes, the power is
repeated.
automatically
off.
turned
HOW TO USE AND OPERATE
Be careful
large items not to prevent
the detergent dispenser lid from
opening
Loading your Dishwasher
1.
For the best
washing performance, it is important
according to
that the dishwasher is loaded
instructions.
3.
Before
loading items into the dishwasher, you
must scrape off large particles in particular non
soluble items such as bones, toothpicks, pips, etc.
Using
Cutlery
the dishwasher, observe the
loading
following general guidelines:
cover
be
basket to prevent
crockery such that water will contact
all surfaces.
with the handles down. The
hinged
and
knives located at upper rack.
Items with burnt
Take
scraps should be soaked
Loading
care
sharp
prior to loading in the dishwasher.
2.
in
cover
clipped
Deep based items should be placed at an angle
to help water run off and dry properly.
on
cutlery
away from the
basket if you choose not to use them.
For the knives, place at seperate rack for
can
Position
cutlery
of similar items. Place the
nesting
the
Cutlery Basket
should be mixed within each
section of the
When
the
when
loading
and
unloading
items.
the Lower Rack
The lower basket is best loaded with dinner
soup bowls, dishes, pots, pans, lids
and even the grill tray.
plates,
Plates should be
facing
positioned upright
Pots, pans and large dishes
upside
Take
and
the center of the rack.
must be turned
down.
care
not to obstruct the rotation
of the spray
5
4
arms.
3
3
Soup plate
1
2
1
2
1
2
1
2
1
4
3
4
4
3
2
3
3
6
4
2
1
4
4
1
2
4
1
2
1
2
1
2
1
2
1
2
4
4
4
3
3
1
2
3
34567
3
47
5
Soup plate
Dinner
plate
10
3
3
HOW TO USE AND OPERATE
4.
Loading the Upper Rack
The upper rack is best loaded with more
delicate items, small plates, long cutlery,
cups, glasses and dishwasher safe plastic
items. Plates should be positioned upwards
with the
plate
bottom
facing
the front of the
rack.
Cups, glasses
upside down.
and bowls must be
positioned
Extra cups or cooking utensils can be laid
on the fold down cup racks which may also
provide support for long stem glasses.
Take
spray
care
arm
not to obstruct the rotation of the
under the upper rack.
Front
5.
Adjusting
Your upper rack
can
the Upper Rack
be raised
cater for different size of
adjusting,
all crockery.
or
Non Dishwasher Safe Items
lowered to
crockery.
Before
The combination of high water temperatures and
dishwasher detergent may damage particular
rack is empty of
Remove the rail pegs in front
ensure
of the rack
runners
by pulling back,
items, therefore
then
we
do not recommend
dishwasher to wash the
using
the
following:
slide the rack out. Re insert the rack in the
chosen
position and replace the pegs.
the rack back into the standard
Copper or anodized aluminum
Hand painted silver or gold leaf crockery
Fitting
position
reduces the space between the
and
lower rack. After adjusting,
upper
check that the spray arm is free to rotate.
Wood
Iron
or
bone handled utensils
or non
rust
proof utensils
Plastic items which
11
are
not
dishwasher safe.
HOW TO USE AND OPERATE
6.
?
Adding Detergent
Dispenser
Detergent
must be
chamber before
put into the detergent
starting
every program
Push latch to open
except the Pre-Wash.
?
Use
only
the
detergent
intended for
household dishwashers.
washing detergent
because the foam
(Ordinary hand-
should not be used,
can
interfere with proper
operation.)
?
Chambers hold
?
The amount of
15g
and
Place proper
detergent into this
25g.
detergent depends on
guide table.
the
compartment
program. Refer to the
PROGRAM
AMOUNT OF DETERGENT
Intensive
25g
Super
25g
Normal
20g
Eco
15g
Delicate
10g
Quick
10g
Pre-Wash
No
Detergent Information
Use
only
the
detergent
detergent
washing detergent
because the foam
?
After the
detergent
is
supplied,
the
?
(Ordinary hand-
should not be used,
can
interfere with proper
operation.)
chamber lid should be closed.
?
intended for
household dishwashers.
The
detergent is dispensed automatically
during the operation.
WARNING
The
detergent
detergent and
The chamber lid remains open after
operation.
used is
a
special
Dishwasher
like all household chemicals
should be treated
poison and kept out
of reach of children. At completion of each
wash program, the detergent compartment
should be checked and any remaining
detergent removed.
12
as a
HOW TO USE AND OPERATE
7.
Adding Rinse Aid
Dispenser
To fill the Rinse Aid
chamber,
rotate the
round cap counter clockwise and remove.
Fill the container to the maximum level
with
a
during
Rinse Aid, then
good quality
and lock the cap.
The Rinse Aid is
replace
automatically dispensed
cycle.
the final rinse
Depending
on
the
dosage setting
and the
number of washes, the chamber may need
only to be topped up once per month
approximately. The rinse aid level can be
checked by looking at the indicator window
when the dishwasher door is fully open.
Black indicates sufficient Rinse Aid
O Clear indicates Rinse Aid
The
dosage setting
most installations.
required
is
factory set to suit
If, after washing, you
Rinse-Aid
Indicator
Adjust
notice
on
cloudy spots, streaks or water marks
your glassware, it may be necessary
increase the
setting.
To do so,
remove
Lever
(Rinse)
the
cap and rotate the indicator arrow to a
higher setting then replace the cap If the
.
smeared
Rinse Aid Information
there is foam present
glasses
on the bottom of the glass or the bottom of
are
the machine. Select
or
a
lower
setting.
Rinse Aid is necessary in order to get spot
and streak free dishes as well as improved
drying. Using the correct amount will
improve wash performance. However, using
too much can produce excess foam leading
to possible water leaks.
13
HOW TO USE AND OPERATE
8. Salt
Filling
This model has
a
water softener to soften hard water.
So you should read these notes
carefully
for correct
operation.
For First filling
?
Check the water hardness of your area and set the
rack and unscrew the cap of salt container.)
?
Fill the salt in the salt container before
using
for easy and clean filling. The salt container
salt intended for dishwasher.)
?
After
?
Screw the cap
adjust
lever
Below
ppm
dH
FH
shown below.
(for it,
remove
Lower
your dishwasher for the first time. Use a kind of funnel
capacity is about 1.9 kg. (Use coarse salt or regenerating
filling, wipe off any spilled salt to seal the cap properly.
tightly to prevent the suds penetration that may
Water hardness
as
cause
the water
130~300
8~20
14~30
1307
13
softening
troubles.
Over 300
21
30
Setting
adjust
lever
Adjust Lever(Salt)
Cap
Salt container
For Refilling
When the salt is exhausted, the salt refill
lamp is lighted on automatically during operation. Then the
cycle. But it is recommended the salt refill should always be
starting next operation to thin and drain away any excess salt
salt should be refilled after finished the
done
(as above mentioned)
solution
before
immediately.
When the
on, it
lamp is lighted
means
the salt is
almost exhausted. Then,
refill the Salt.
Note
After
filling
with salt, may take
a
while before the
indicating lamp
14
goes out.
HOW TO USE AND OPERATE
9. Fold down dividers.
11.
Fold-down dividers at the back of the
rack
can
be lowered to
improve stacking
of pots and pans.
?
?
?
?
?
?
10.
Drying
At the end of the program, it is
recommended to
assist in
fully
open the door to
drying.
15
Energy Test(EN50242)
Appliance loaded in accordance with
standard specifications.
Example of loaded dishwasher : p.10~11
Capacity : 12 place settings
Comparability course : ECO with
Intensive+ option.
Rinse aid setting : 3
Reference cleaner : 6g of detergent onto
the inside surface of the door and fill 24g
into the detergent dispenser.
Height-adjustable Rack-U must be
inserted in the uppermost position.
WASH OPTIONS
Before
the wash program, press the power button. Then Normal
program will be selected with remaining time on display window. To change the
program, press the program button until required program is selected.
selecting
Child Lock
Start / Pause Button
After
or
selecting wash program, press the Start
Pause button to start the wash cycle.
To reduce the
a
possibility
of children
starting
the dishwasher when unattended, the child
If at any time you want to interrupt the
washing cycle, press the Start or Pause button.
lock feature
Your dishwasher will then pause. Press the
Start or Pause button again to re-start
can
be selected.
For
locking or unlocking, press "Delay
"Program" buttons
simultaneously.
Start" and
dishwasher.
Progress Indicators
Sani-Rinse
Once you select a program, the progress
indicators light(Wash, Rinse, Dry). When press
the Start or Pause button to start the program,
When you want to rinse dishes with higher
temperature for sanitation, use this function
the current stage
the water temperature goes up to 77˚C when
light
at any program. If you choose this
will blink.
function,
rinsing.
Press Rinse button until "R77˚" is
Delay Start
This function enables the wash
cycle
Half & Intensive+
With each press, upper rack only(Upper
light on), lower rack only(Lower light on)
by using
the program button.
Set the delay time you want
by pressing the
"Delay Start" button. The delay start time is
increased by 1 hour for each pressing.
and intensive+
washing(Upper and Lower
lights
together) can be selected.
In case of small load washing, use upper or
lower rack only to save energy.
In case you want powerful washing, use
Intensive+ washing option with main
on
Press the start button. Then the program will
be started
automatically after the delayed
display has expired.
time shown in the
program.
Rinse Plus
when you select any program, the
Rinse process is done only two ( 1 normal
Normally
rinse +1
+
1
heating rinse) or three (2 normal rinse
heating rinse) times according to selected
program. But if you want to rinse more, you
can use this function. As you select R+1 with
pressing
done
Rinse button, the normal rinse will be
one
time
on.
to start
from 1 to 19 hours later.
Select the program that you want
lighted
more.
16
PROGRAMS
Model
:
LD-12BW5 / LD-12BS6 / LD-12BT7
WASHMain
Program
Pre Wash
wash
RINSE
Rinse 1
Rinse 2
Rinse 3
Heating
DRY
Rinse
50C
70C
70C
40C
70C
70C
65C
65C
50C
62C
40C
55C
35C
40C
Intensive
Super
Normal
Eco
Delicate
Quick
Pre-Wash
Intensive Wash
Eco Wash
This program is for very heavily soiled
loads including pots, pans and casserole
dishes which may have
dry
This program is for
loads.
including pots,
heavily
everyday
Delicate Wash
This program is for
like glasses.
soiled loads
pans and casserole dishes.
normally
washing
delicate items
Quick Wash
Normal Wash
This program is for
everyday loads.
soiled
food residue.
Super Wash
This program is for
light
This program is for that quick wash of
lightly soiled recently used dishes and
soiled
cutlery.
17
CHECK AND CARE
To prevent trouble and poor
filters and spray
arms
operating,
it is
important
Filters
Remove the lower rack first.
?
?
Turn the mesh filter counterclockwise off.
?
?
Take out the mesh filter and upper STS
filter.
?
Pull the upper rack forwards.
Check that the water jet holes
blocked
Clean them if necessary.
Replace them in the reverse order.
by
food
When necessary to clean,
by unscrewing the nut.
?
Clean the spray
reverse order.
upper STS filter
Upper spray
?
?
Spray Arm
Check that the water jet holes
blocked
by
food
are
not
remove
the
particles.
When necessary to clean,
arm
by pulling up.
?
for the
Clean the spray
down.
arm
and
replace
it
pulling
18
arm
are
not
remove
the
particles.
?
mesh filter
Lower
care
Upper Spray Arm
?
?
to check and
at intervals.
arm
and
replace
arm
it in the
TROUBLE SHOOTING GUIDE
If
a
problem
in your
occurs
machine, call for service.
Before you call for service, check the below instructions to
problem can be solved by yourself first.
Problem
The
on
whether the
see
Possible Causes
do not
lamps
Fuse blown
?
The
?
Door is not
?
The start button is not
?
The drain hose is kinked.
code)
?
The filter is
on.
The machine does not start.
pumped
away.
circuit breaker
or
of the house
electricity
fully
tripped.
was
cut
off.
closed.
pressed.
(The display show
"
The
display
shows
"
"
code
?
The machine is inclined.
The
display
shows
"
"
code
?
Water is not
The
display
shows
"
"
code
?
Water
?
Water is leaked
?
The circuit of Heater is troubled.
?
The
mounting of spray arms is blocked by food
particles. (Clean the holes of the spray arm)
?
The amount of
?
Salt is exhausted in the salt container.
?
The salt container cap is not
?
Too little Rinse-aid
dispensed.
?
Too little Rinse-aid
dispensed.
?
Incorrect amount of
The
display
The spray
shows
"
properly
inserted in the socket.
Plug
?
when the power switch
Water is not
is not
?
come
"
"
code
does not rotate
arms
smoothly
White
deposits
are
dish washer after
Streaks
are
Dry results
on
the
washing.
left
on
are
not
Washing results
satisfactory.
left
glassware
satisfactory.
are
not
?
?
?
?
?
clogged. (Clean
the
filter)
supplied. (Water tap
leakage
is not
opened)
in Hose connections
by damages.
detergent
or
rinse-aid set
securely
incorrectly.
screwed
detergent.
incorrectly arranged or overloaded.
Filters are clogged.
Water jet holes of spray arms blocked.
Spray arms' rotation obstructed by utensils.
Utensils
Unsuitable program selected.
19
on.
Download PDF

advertising