LG | 55WV70MD | LG 55WV70MD-B Owner’s Manual

ENG
ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating your set and retain it
for future reference.
MONITOR SIGNAGE MODELS
55WV70MD
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
4
LICENSES
21
Using Additional Options
21
- Adjusting Aspect Rratio
23
- Using the Input List
5
ASSEMBLING AND
PREPARING
24 ENTERTAINMENT
5
Accessories
6
Parts
24
- Connecting to a Wired Network
7
To Install in a Portrait Layout
25
- Network Status
7
Remove L-brackets before Installation
26
- Connecting USB Storage Devices
8
STORAGE METHOD FOR PANEL
27
- Browsing Files
29
- Viewing Movies
33
- Viewing Photos
35
- Listening to Music
PROTECTION
8
- Correct Method
8
- Incorrect Method
9
Installing on a Wall
10
EXTERNAL EQUIPMENT SETUP
10
- IR RECEIVER
11
Tiling Displays
37
3D Technology
11
- How to Mount the Set
37
Precautions to Take When Viewing 3D
12
- How to Join Sets
37 3D IMAGING (ONLY 3D
MODELS)
Images
38
When Using 3D Glasses
13 REMOTE CONTROL
39
3D Imaging Viewing Range
15
40
Viewing 3D Imaging
41
3D Mode Setting Option
Displaying the Device Name Connected
to an Input Port
16 USING THE MONITOR SET
43 CUSTOMIZING SETTINGS
43
Accessing Main Menus
44
- PICTURE Settings
47
- AUDIO Settings
48
- TIME Settings
49
- OPTION Settings
53
Picture ID
54
- NETWORK Settings
16
Connecting to a PC
16
- RGB Connection
17
- DVI Connection
17
- HDMI Connection
18
- DP Connection
18
- IR Receiver Connection
19
Adjusting the Screen
19
- Selecting an Image Mode
19
- Customizing Image Options
55 MAKING CONNECTIONS
20
- Customizing PC Display Options
56
20
Adjusting the Sound
Camcorder, Camera, Gaming Device or
20
- Selecting an Sound Mode
VCR player
21
- Customizing Sound Options
56
Connecting to a HD receiver, DVD,
- DVI Connection
TABLE OF CONTENTS
- HDMI Connection
57
- Component Connection
57
- AV(CVBS) Connection
58
Connecting to the LAN
58
- LAN Connection
58
Connecting to a USB
59
Daisy Chain Monitors
59
- RGB Cable
59
- DVI Cable
60 TROUBLESHOOTING
63 TROUBLESHOOTING WHEN
USING 3D MODE
64 SPECIFICATIONS
66 CONTROLLING THE MULTIPLE
MONITORS
66
Connecting the Cable
66
RS-232C Configurations
66
Communication Parameter
67
Command Reference List
69
Transmission / Receiving Protocol
82 IR CODES
ENG
ENGLISH
56
3
4
LICENSES
ENGLISH
LICENSES
Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified device that
plays DivX video. Visit divx.com for more information and software tools to
convert your files into DivX videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the
DivX VOD section in your device setup menu. Go to vod.divx.com for more
information on how to complete your registration.
DivX Certified to play DivX video up to HD 1080p, including premium
content.
DivX , DivX Certified and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;
7,515,710; 7,519,274
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
ASSEMBLING AND PREPARING
5
Accessories
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual product
and accessories.
CD (Owner's Manual) / Card
Power Cord
D-sub 15 pin signal cable
DVI Cable
POWER
ENERGY
MONITOR
INPUT
IR Receiver
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
RS-232C Cable
Tiling Guide
(4 ea)
WXYZ
MARK
ARC
3D
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
TILE
EXIT
ID
ON
OFF
M4 x 6L
Screw (8 ea)
(Guide Bracket
Screws)
M6
Screw (4 ea)
(VESA Mount Screws)
PSM
3D Glasses (2 boxes)
(Normal type,Clip type)
Remote control and Batteries
CAUTION
Do not use any unapproved accessories to ensure the safety and product life span.
yy
Any damages or injuries by using unapproved accessories are not covered by the warranty.
yy
NOTE
The accessories supplied with your product may vary depending on the model.
yy
Product specifications or contents in this manual may be changed without prior notice due to upgrade
yy
of product functions.
ENG
ENGLISH
ASSEMBLING AND PREPARING
6
ASSEMBLING AND PREPARING
Parts
ENGLISH
ENG
USB
DP
/DVI
DVI IN
DVI OUT
RGB
/COMPONENT OUT
AUDIO
IN
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Connection panel
LAN
COMPOSITE
SPEAKER
ASSEMBLING AND PREPARING
7
To Install in a Portrait Layout
Remove L-brackets before Installation
Remove the L-brackets from each corner of the monitor before installing it.
NOTE
Keep the removed L-brackets and use them when moving the monitor later.
yy
3D function is not supported in portrait mode.
yy
ENG
ENGLISH
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).
8
ASSEMBLING AND PREPARING
STORAGE METHOD FOR PANEL PROTECTION
ENGLISH
ENG
Correct Method
Incorrect Method
Panel
Panel
If the product needs to be set upright, hold both
sides of the product, and tilt backward carefully.
Do not let the panel touch the floor.
Panel
If the product is tilted onto the bezel, the bottom of
the panel may be damaged.
Cushion
Panel
When laying down the product, lay a cushion on a
flat floor. Put the product on it with the panel of
the product facing down.
Panel
If the product is tilted onto the edge of the panel,
the panel may be damaged.
If there is not a cushion available, ensure the floor is
clean and then lay the product down carefully with the
panel facing either upward or downward. At this time,
be careful objects are not fallen on the panel.
ASSEMBLING AND PREPARING
Installing on a Wall
CAUTION
10 cm
20 cm
10 cm
10 cm
Install the monitor at least 10 cm away from the
wall and leave about 10 cm of space at each side
of the monitor to ensure sufficient ventilation.
Use the wall mount plate and screws that comply
with the VESA standard.
NOTE
Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in a
closet) or on a carpet or cushion. If there is
no other option but to mount the product on
the wall, make sure that sufficient ventilation
is provided before installation.
- Failure to do so may result in a fire due to
the increase in the internal temperature.
Disconnect the power cord first, and then
yy
move or install the Monitor set. Otherwise
electric shock may occur.
If you install the Monitor set on a ceiling or
yy
slanted wall, it may fall and result in severe
injury.
Do not over tighten the screws as this may
yy
cause damage to the Monitor set and void
your warranty.
Use the screws and wall mounts that
yy
meet the VESA standard. Any damages
or injuries by misuse or using an improper
accessory are not covered by the warranty.
ENG
ENGLISH
To install the Monitor on a wall (optional),
use the VESA screws provided as accessories to
fasten it.
Please refer to p11 on How to Mount the Set.
10 cm
9
10
ASSEMBLING AND PREPARING
EXTERNAL EQUIPMENT SETUP
ENGLISH
ENG
IR RECEIVER
This allows a remote control sensor to be placed
in a custom location. Then that display can control
other displays via an RS-232C cable.
AUDIO
IN
REMOTE
CONTROL IN
ASSEMBLING AND PREPARING
11
Tiling Displays
ENG
ENGLISH
How to Mount the Set
Example of 2 x 2 tiling
* Using the screws for fixing the VESA wall mount, mount the set to the wall mount plate or the wall.
Screws for attaching
the VESA wall mount
<Rear view of the set with the wall mount plate>
* The wall mount plate is shaded in gray in the illustration to help you see it.
12
ASSEMBLING AND PREPARING
How to Join Sets
ENGLISH
ENG
1
Join other sets using screws for fixing the VESA wall mount in the same way as above.
Set 4 joined to the rest of the sets
(2 x 2 tiling)
2
After joining the sets, use the tiling guide to adjust the gap between the sets.
3 Now the 2 x 2 tiling is complete.
You can tile in various combinations, such as 3 x 3.
NOTE
The load applied to each set should be supported by the wall mount plate or the wall using a VESA
yy
wall mount (600 x 400).
The load applied to each set should be supported by the wall mount plate using a VESA wall mount.
yy
(Each set must be firmly mounted to the wall mount plate or the wall.)
You may mount the set without using the tiling guide; this does not affect the performance of the
yy
device.
13
REMOTE CONTROL
The descriptions in this manual are based on the buttons of the remote control. Please read this manual
carefully and use the Monitor correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the
label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
Do not mix old and new batteries, as this
yy
may damage the remote control.
Make sure to point the remote control to the
yy
remote control sensor on the Monitor.
POWER
ENERGY
MONITOR
1
4
7
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
ARC
3D
P
BRIGHT A
NESS G
E
MUTE
MENU
AUTO
S.MENU
OK
TILE
EXIT
ID
ON
OFF
PSM
ENERGY SAVING( )
Adjusts the brightness of
the screen to reduce energy
consumption.
/ I (POWER)
Turns the Monitor on or off.
Monitor On / Off
Turn off the monitor and then
turn it back on.
POWER
ARC
Selects the Aspect Ratio
Mode.
INPUT
OFF
ON
1/a/A Button
Toggles between numerical
and alphabetical.
ENERGY
MONITOR
INPUT
Selects the input mode.
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
Number and Alphabet Buttons
Enters numerical or alphabetical
characters depending on the
setting.
DEF
MNO
WXYZ
CLEAR
Deletes the entered numerical
or alphabetical character.
MARK
Volume Up / Down
Adjusts the volume level.
ARC
3D
P
BRIGHT A
NESS G
E
MUTE
3D
Selects the 3D Mode.
MENU
AUTO
S.MENU
MUTE
Mutes all sounds.
OK
BACK
TILE
ID
ON
OFF
EXIT
Brightness Key
Adjust the brightness by
pressing the Up and Down
buttons on the remote control.
In USB mode, the OSD menu
has the Page function to
move to the next file list.
ENG
ENGLISH
REMOTE CONTROL
14
REMOTE CONTROL
ENGLISH
ENG
POWER
POWER
ENERGY
MONITOR
1
4
7
.,!
GHI
PQRS
1/a/A
ENERGY
MONITOR
INPUT
OFF
ON
2
5
8
0
SAVING
TUV
3
6
9
-*#
CLEAR
ABC
JKL
DEF
MNO
WXYZ
MARK
INPUT
ARC
3D
P
BRIGHT A
NESS G
E
MUTE
OFF
ON
MENU (See p.43)
Accesses the main menus
or saves your input and exit
menus.
.,!
GHI
PQRS
1/a/A
MENU
SAVING
TUV
-*#
CLEAR
JKL
TILE
DEF
MNO
WXYZ
P
BRIGHT A
NESS G
OK
Selects menus or options and
confirms your input.
E
AUTO
S.MENU
S.MENU
(SuperSign Menu Key)
This button selection is not
applicable.
OK
TILE
EXIT
ID
ON
OFF
PSM
ID ON/OFF
When the number of Picture
ID is equal to Set ID you can
control the monitor which
you want in the multi display
condition.
AUTO
Automatically adjusts picture
position and minimizes image
instability.(RGB input only)
MUTE
MENU
BACK
Allows the user to move back
one step in user interaction
function.
OFF
PSM
ARC
PSM
EXIT
ID
ON
MARK
Navigation Buttons
Scrolls through menus or
options.
S.MENU
OK
ABC
AUTO
EXIT
Clears all on-screen displays
and returns to Monitor set
viewing from any menu.
TILE
Selects the TILE Mode.
PSM
Selects the Picture Status
Mode.
USB Menu Control Buttons
Controls media playback.
OFF
ON
OFF
ON
SAVING
SAVING
REMOTE
CONTROL
1/a/A
1/a/A
CLEAR
CLEAR
Displaying the Device Name Connected to an Input Port
.,!
ABC
DEF
.,!
ABC
DEF
GHI
JKL
MNO
GHI
JKL
MNO
PQRS
TUV
WXYZ
PQRS
TUV
WXYZ
-*#
-*#
MARK
MARK
ARC
ARC
BRIGHT
NESS
P
A
G
E
MUTE
Display which devices are connected to which
external input ports.
AUTO
MENU
S.MENU
1 Access the Input list screen and press the blue
(input label) button onOKthe remote control.
BACK
TILE
EXIT
ID
ON
OFF
PSM
2 You can assign an input label for every input
except USB.
Input Label
AV
Component
RGB
HDMI
DVI-D
Display Port
Close
3D
P
BRIGHT A
NESS G
E
MUTE
NOTE
MENU
AUTO
S.MENU
External inputs supported: AV, Component,
yy
RGB, HDMI, DVI-D, Display Port
OK
Labels available : VCR,
DVD, Set top box,
yy
Satellite, Game, PC, Blue-ray, HD-DVD
The input labels are displayed on the Input
yy
Label screen
or at TILE
the topEXIT
left of the screen
BACK
when you change
the external input setting.
ID
OFF
ON
For DTV/PC-compatible
signals, such as
yy
1080p 60 Hz, the screen settings may
change according to the input label. The Just
Scan option is available if PSM
a PC is connected
as an external device.
ENG
ENGLISH
3D
15
16
USING THE MONITOR SET
ENGLISH
ENG
USING THE MONITOR SET
Connecting to a PC
RGB Connection
Your Monitor set supports the Plug & Play* feature.
Transmits the analog video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the 15 pin signal cable as shown in the
following illustrations. Select RGB input.
* Plug & Play: A PC will have a built-in driver for
the monitor, no extra software is needed.
Back of the product.
AUDIO
RGB
/COMPONENT OUT
NOTE
IN
RGB
/COMPONENT IN
REMOTE
It is recommended to use the Monitor set
yy
with the HDMI connection for the best image
quality.
To comply with the specifications of the
yy
product, use a shielded interface cable with
ferrite core, such as D-sub 15 pin cable and
DVI/HDMI cable provided with the product.
If you turn the Monitor set on when the set
yy
becomes cold, the screen may flicker. This is
normal.
Some red, green, or blue spots may appear
yy
on the screen. This is normal.
CONTROL IN
Macintosh Adapter
(not included)
(not included)
PC/MAC
PC
CAUTION
Connect the signal
yy
input cable and tighten
it by turning the screws
clockwise.
Do not press the screen with your finger for
yy
a long time as this may result in temporary
distortion on the screen.
Avoid displaying a fixed image on the
yy
screen for a long period of time to prevent
image burn. Use a screensaver if possible.
NOTE
Use the standard Macintosh
yy
adapter since an incompatible
adapter is available in the
market. (Different signaling
system)
Apple computers may require an adapter to
yy
connect to this monitor. Call or visit their web
site for more information.
USING THE MONITOR SET
HDMI Connection
Transmits the digital video signal from your PC to
the Monitor set. Connect the PC and the Monitor
set with the DVI cable as shown in the following
illustrations. Select DVI input.
Transmits digital video and audio signals from your
PC to the Monitor set. Connect the PC and the
Monitor set with the HDMI cable as shown in the
following illustrations.
Select HDMI input.
IN
DVI IN
DVI IN
AUDIO
IN
Back of the product.
AUDIO
IN
/DVI
IN
REMOTE
REMOTE
/DVI
IN
DP
DP
AUDIO
REMOTE
IN
CONTROL IN
CONTROL IN
CONTROL IN
ENG
ENGLISH
DVI Connection
Back of the product.
AUDIO
17
REMOTE
CONTROL IN
(not included)
(not included)
PC
PC
NOTE
Use a High Speed HDMI™ Cable.
yy
Please check the PC environment if you
yy
cannot hear sound in HDMI mode. Some
PCs require you to manually change the
default audio output to HDMI.
If you want to use HDMI-PC mode, you must
yy
set the input label to PC mode.
When HDMI PC is used, a compatibility
yy
problem might occur.
PC
18
USING THE MONITOR SET
ENGLISH
ENG
DP Connection
IR Receiver Connection
Transmits the digital video and audio signals from
your PC to the Monitor set. Connect the PC and
the Monitor set with the DP cable as shown in the
following illustrations.
Select DP input.
Allows the use of a wired remote or IR receiver
extension.
DVI IN
Back of the product.
Back of the product.
AUDIO
/DVI
(RGB/DVI)
DP
/DVI
IN
AUDIO
IN
REMOTE
CONTROL IN
REMOTE
CONTROL IN
(not included)
PC
NOTE
Sound may not be available depending on
yy
the DP version of your PC.
USING THE MONITOR SET
Customizing Image Options
Selecting an Image Mode
Customize basic and advanced options of each
image mode for the best screen performance.
Display images in its optimized settings by
selecting one of the preset image modes.
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
2 Press the Navigation buttons to scroll to
PICTURE and press OK.
3 Press the Navigation buttons to scroll to
Picture Mode and press OK.
4 Press the Navigation buttons to scroll to an
image mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Mode
Description
Vivid
Adjusts the video image for the retail
environment by enhancing the contrast,
brightness, Colour, and sharpness.
Standard
Adjusts the image for the normal
environment.
Cinema
Optimizes the video image for a cinematic
look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and
dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast
gaming screen such as PCs or games.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Description
Backlight
djusts the brightness of the screen
A
by controlling the LCD backlight. If
you decrease the brightness level,
the screen becomes darker and the
power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture. You may use Brightness
when the dark part of the picture is
saturated.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and
green levels.
Color Temp.
Set to warm to enhance hotter Colors
such as red, or set to cool to make
picture bluish.
Advanced
Customizes the advanced options.
Refer to the Advanced image options.
Control
Picture Reset
Restores the options to the default
setting.
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
ENG
ENGLISH
Adjusting the Screen
19
20
USING THE MONITOR SET
ENGLISH
ENG
Customizing PC Display Options
Adjusting the Sound
Customize options of each image mode for the
best image quality.
This function works in the following mode:
yy
RGB[PC] mode.
Selecting an Sound Mode
1 Press MENU to access the main menus.
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to
2 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to
3 Press the Navigation buttons to scroll to Sound
4 Select and adjust following options, and then
4 Press the Navigation buttons to scroll to a
PICTURE and press OK.
Screen and press OK.
press OK.
Option
Description
Resolution
Selects a proper resolution. See
“Customizing PC display options”.
Auto
Config.
Sets to adjust the screen position, clock,
and phase automatically.
The displayed image may be unstable for
a few seconds while the configuration is
in progress.
Position/
Adjusts the options when the picture is
Size/Phase not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default
setting.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
Play the sound in its optimized settings by
selecting one of the preset sound modes.
AUDIO and press OK.
Mode and press OK.
sound mode you want and press OK.
Mode
Description
Standard
Select when you want standard-quality
sound.
Music
Select when you listen to music.
Cinema
Select when you watch movies.
Sports
Select when you watch sports events.
Game
Select when you watch gaming events.
5 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
21
USING THE MONITOR SET
Using Additional Options
Customize options of each sound mode for the
best sound quality.
Adjusting Aspect Rratio
1 Press MENU to access the main menus.
Resize the image to view the image at its optimal
size by pressing ARC while you are watching
Monitor set.
2 Press the Navigation buttons to scroll to
AUDIO and press OK.
3 Press the Navigation buttons to scroll to Sound
Mode and press OK.
4 Press the Navigation buttons to scroll to a
sound mode you want and press OK.
5 Select and adjust following options, and then
press OK.
Option
Description
Infinite
LG's Infinite Surround option provides
Surround
5.1 channel stereo sound from two
CAUTION
If a fixed image displays on the screen for a
yy
long period of time, it will be imprinted and
become a permanent disfigurement on the
screen. This is “image burn” or “burn-in” and
not covered by the warranty.
If the aspect ratio is set to 4:3 for a long
yy
period of time, image burn may occur on the
letterboxed area of the screen.
speakers.
Treble
Controls the dominant sounds in the
NOTE
output. When you turn up the treble,
it will increase the output to the lower
frequency range.
Bass
Makes the output sound softer. If the
You can also change the image size by
yy
accessing the main menus.
bass is increased, the frequency of the
output also increases.
Reset
Resets the sound mode to the default
MODE AV Component RGB
Display
setting.
ARC
6 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
DVI-D
HDMI
Port
PC
DTV
PC
PC
DTV
PC
o
o
o
o
o
o
o
x
o
x
x
o
x
x
o
x
o
o
x
o
o
o
o
o
o
o
o
o
o
o
x
o
x
x
o
x
o
o
x
o
x
x
o
x
16:9
o
o
Just Scan
x
1:1
x
4:3
Zoom
Cinema
Zoom
ENG
ENGLISH
Customizing Sound Options
22
USING THE MONITOR SET
ENGLISH
ENG
- 16:9 : This selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
- 4:3 : This selection will allow you to view a
picture with an original 4:3 aspect ratio, black
bars will appear on both the left and right of the
screen.
- Just Scan : This Selection will allow you view
the picture of best quality without loss of original
picture in high resolution image. Note: If there is
noise in original Picture, You can see the noise
at the edge.
- Zoom : This selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
Just Scan
- 1:1 : The aspect ratio is not adjusted from the
original. (Only Display Port PC, HDMI PC,
DVI-D PC, RGB PC)
- Cinema Zoom : Choose Cinema Zoom when
you want to enlarge the picture in correct
proportion. Note: When enlarging or reducing
the picture, the image may become distorted.
USING THE MONITOR SET
23
Using the Input List
1 Press INPUT to access the input source list.
2 Press the Navigation buttons to scroll to one of
the input sources and press OK.
Input source
Description
AV
Watch video from a VCR or other
external devices.
Component
Watch the contents in a DVD or
other extemal devices, or through a
digital set-top box.
RGB
View a PC display on the screen.
DVI-D
View a PC display on the screen.
HDMI
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices.
Display Port
Watch contents in a PC, DVD
of Digital set-top box other high
definition devices.
ENG
ENGLISH
Selecting an input source
24
ENTERTAINMENT
ENGLISH
ENG
ENTERTAINMENT
Connecting to a Wired Network
Connect the display to a local area network (LAN)
via the LAN port as shown on the following illustration and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small
number of networks may require the display network settings to be adjusted. For most networks,
the display will connect to automatically without
any adjustments.
For detail information, contact your internet provider or router manual.
To set up the network seetings: (Even if your display has already connected automatically, running
setup again will not harm anything),
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Setting and press OK.
4 If you already set Network Setting, select
Resetting. The new connection settings resets
the current network settings.
5 Select IP Auto Setting or IP Manual Setting.
LAN
Router
Router
@
LAN
Cable modem
Internet
Internet
WAN
-If selecting IP Manual Setting, press the
Navigation and Number buttons. IP addresses will need to be input manually.
-IP Auto Setting: Select this if there is a
DHCP server (Router) on the local area network (LAN) via wired connection, the display
will automatically be allocated an IP address.
If you’re using a broadband router or broadband modem that has a DHCP (Dynamic
Host Configuration Protocol) server function.
The IP address will automatically be determined.
6 When you are finished, press EXIT.
ETHERNET
Cable modem
CAUTION
yy
Do not connect a modular phone cable to
the LAN port.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
CAUTION
yy
Network setting menu will not be available until the display connected to physical
network.
yy
Since there are various connection methods, please follow the specifications of your
telecommunication carrier or internet service
provider.
ENTERTAINMENT
NOTE
yy
A DSL modem is required to use DSL service
and a cable modem is required to use cable
modem service. Depending on the access
method of and subscriber agreement with your
ISP, you may not be able to use the internet
connection feature contained in this display or
you may be limited to the number of devices
you can connect at the same time. (If your ISP
limits sub-scription to one device, this display
may not be allowed to connect when a PC is
already connected.)
yy
The use of a “Router” may not be allowed or its
usage may be limited depending on the policies and restrictions of your ISP. For details,
contact your ISP directly.
Tips for Network setting
yy
Use a standard LAN cable with this display.
Cat5 or better with a RJ45 connector.
yy
Many network connection problems during set
up can often be fixed by re-setting the router
or modem. After connecting the display to the
network, quickly power off and/or disconnect
the power cable of the network router or cable
modem. Then power on and/or connect the
power cable again.
yy
Depending on the internet service provider
(ISP), the number of devices that can receive
internet service may be limited by the applicable terms of service. For details, contact your
ISP.
yy
LG is not responsible for any malfunction of the
display and/or the internet connection feature
due to communication errors/malfunctions associated with your internet connection, or other
connected equipment.
yy
LG is not responsible for problems within your
internet connection.
yy
You may experience undesired results if the
network connection speed does not meet the
requirements of the content being accessed.
yy
Some internet connection operations may not
be possible due to certain restrictions set by
the Internet service provider (ISP) supplying
your Internet connection.
yy
Any fees charged by an ISP including, without
limitation, connection charges are your responsibility.
yy
A 10 Base-T or 100 Base-TX LAN port is
required when using a wired connection to this
display. If your internet service does not allow
for such a connection, you will not be able to
connect the display.
Network Status
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and press OK.
3 Press the Navigation buttons to select Network Status.
4 Press OK to check the network status.
5 When you are finished, press EXIT.
Option
Setting
Test
Close
Description
Return to the network setting menu.
Test the current network status after setting the network.
Return to the previous menu.
ENG
ENGLISH
yy
If you want to access the Internet directly on
your display, the internet connection should
always be on.
yy
If you cannot access the Internet, check
the network conditions from a PC on your
network.
yy
When you use Network Setting, check the
LAN cable or check if DHCP in the router is
turned on.
yy
If you do not complete the network settings,
the network may not work properly.
25
26
ENTERTAINMENT
Connecting USB Storage Devices
ENGLISH
ENG
Connect USB storage devices such as a USB
flash memory, external hard drive to the display
and use multimedia features (See "Browsing Files"
on page 27).
Connect a USB flash memory or USB memory
card reader to the Display as shown on the following illustration. The My media screen appears.
Tips for using USB storage devices
yy
Only a USB storage device is recognizable.
yy
If the USB storage device is connected
through a USB hub, the device is not recognizable.
yy
A USB storage device using an automatic
recognition program may not be recognized.
yy
A USB storage device which uses its own
driver may not be recognized.
yy
The recognition speed of a USB storage
device may depend on each device.
or
yy
Please do not turn off the display or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may
be damaged.
yy
Please do not connect the USB storage
device which was artificially maneuvered on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files or movie files.
yy
Please use only a USB storage device which
was formatted as a FAT32 file system, NTFS
CAUTION
yy
Do not turn the display off or remove a USB
storage device while EMF(my media) Menu
is activated, as this could result in loss of
files or damage to the USB storage device.
yy
Back up your files saved on a USB storage
device frequently, as you may lose or damage the files and this may be not covered by
the warranty.
file system provided with the Windows operating system. In case of a storage device
formatted as a different utility programme
which is not supported by Windows, it may
not be recognized.
yy
Please connect power to a USB storage
device(over 0.5 A) which requires an external
power supply. If not, the device may not be
recognized.
yy
Please connect a USB storage device with
the cable offered by the device maker.
yy
Some USB storage devices may not be supported or operated smoothly.
yy
File alignment method of USB storage
device is similar to Window XP and filename
can recognize up to 100 English characters.
27
ENTERTAINMENT
yy
Be sure to back up important files since data
damaged. We will not be responsible for any
data loss.
yy
If the USB HDD does not have an external
power source, the USB device may not be
detected. So be sure to connect the external
power source.
- Please use a power adaptor for an external
power source. We do not guarantee an USB
cable for an external power source.
yy
If your USB memory device has multiple
Browsing Files
Access the photo, music, or movie lists and browse
files.
1 Connect a USB storage device.
2 Press MENU to access the main menus.
3 Press the Navigation buttons to scroll to My
Media and press OK.
4 Press Navigation buttons to scroll to All Media,
Movie List, Photo List, or Music List and press
OK.
partitions, or if you use a USB multi-card
- All Media: Shows all files in the file list.
reader, you can use up to 4 partitions or USB
- Movie List, Photo List, or Music List: Shows
memory devices.
yy
If a USB memory device is connected to a
USB multi-card reader, its volume data may
not be detected.
only one type of file in the file list.
5 Press Navigation buttons to select a folder or
file.
yy
If the USB memory device does not work
properly, disconnect and reconnect it.
2
1
yy
How fast a USB memory device is detected
differs from device to device.
yy
If the USB is connected in Standby Mode,
Page 1/1
All Media
All Media
USB External
Movie List
Photo List
Music List
3
Page 1/1
specific hard disk will automatically be
4
5
loaded when the display is turned on.
yy
The recommended capacity is 1 TB or less
for a USB external hard disk and 32 GB or
Go to root folde
Go to upper folder
Exit
less for USB memory.
6
yy
Any device with more than the recommended
capacity may not work properly.
yy
If a USB external hard disk with a “Energy
Saving” function does not work, turn the
No.
Description
hard disk off and on again to make it work
1
Shows all media folders.
properly.
2
Current page number/total number of
pages.
3
Moves to the previous or next page.
4
Current page number/total number of
pages.
5
Files info or thumbnail.
6
Available buttons on the remote control.
yy
USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy
Maximum of 999 folders or files can be recognized under one folder.
yy
A USB 3.0 storage device may not work.
ENG
ENGLISH
stored in a USB memory device may be
28
ENTERTAINMENT
Supported file format
ENGLISH
ENG
Type
Supported file format
Movie Supported Maximum resolution : 1920 x 1080 @30p (only Motion JPEG 640x480 @30p)
.asf, .wmv
[Video] VC-1 Advanced Profile, VC-1 Simple and Main Profiles
[Audio] WMA Standard
.divx, .avi
[Video] DivX3.11, DivX4, DivX5, DivX6, XViD, H.264/AVC, Motion JPEG
[Audio] MPEG-1 Layer I, II, Dolby Digital, MPEG-1 Layer III (MP3), DTS
.mp4, .m4v, .mov
[Video] H.264/AVC, MPEG-4 Part 2, XViD
[Audio] AAC, MPEG-1 Layer III (MP3), DTS.mkv
[Video] H.264/AVC, XViD, MPEG-4 Part2
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), DTS
.ts, .trp, .tp
[Video] H.264/AVC, MPEG-2
[Audio] MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital,
Dolby Digital Plus, AAC
.vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
.mpg, .mpeg, .mpe
[Video] MPEG-1
[Audio] MPEG-1 Layer I, II
Photo JPEG
Baseline : 64 x 64 to 15360 x 8640
Progressive : 64 x 64 to 1920 x 1440
yy You can play JPEG files only.
yy Non-supported files are displayed in the form of predefined icon.
File
Item
Extensions
2D
jpeg
Supported file format
yySOF0: baseline,
jpg
yySOF1: Extend Sequential,
jpe
yySOF2: Progressive
Photo size
3D
(Only 3D
models)
Music yy
yy
yy
yy
mpo
Supported file format
Photo size
File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
Profile
yyMin : 64 x 64
yyMax:
Normal Type: 15360 (W) x 8640 (H)
Progressive Type: 1920 (W) x 1440 (H)
mpo
yy 4:3 size : 3,648 x 2,736 / 2,592 x 1,944 / 2,048 x 1,536
yy3:2 size : 3,648 x 2,432
ENTERTAINMENT
Viewing Movies
29
5 Play a movie.
1 Press the Navigation buttons to scroll to My
Media and press OK.
NOTE
yy
An unsupported file displays a preview image
icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
2 Press the Navigation buttons to scroll to Movie
List and press OK.
3 Press the Navigation buttons to scroll to a
6 Control playback by using the following buttons.
folder you want and press OK.
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Page 1/1
Movie List
USB2 External
Drive1
Page 1/2
Option
Button
Hide
Exit
Description
Stops the playback.
Go to root folder
Go to upper folder
Plays a video.
Exit
Pauses or resumes the playback.
Scans backward in a file.
Scans forward in a file.
Button
Navigation
button
OK
PAGE
Green
button
Yellow
button
Description
and
Scrolls through the files.
Plays the highlighted file.
Moves to the previous or next page.
Go to root folder.
Go to upper folder.
ENERGY
SAVING
(Only 3D
models)
Plays videos in slow motion.
Selects the frame directly.
The entire file is divided into 10 frames.
Frames may not be displayed depending
on the file.
Increases or decreases the brightness
of your screen.
Views the 3D imaging.
Shows the Option menu.
AV MODE
Select the desired source.
Hides the menu on screen.
To see the menu again, press OK button
to display.
Moves to the previous menu screen.
ENG
ENGLISH
Play video files on display. Your display shows all
of the video files saved in a USB storage device or
shared folder on a PC.
30
ENTERTAINMENT
Tips for using playing video files
ENGLISH
ENG
yy
Some user-created subtitles may not work
properly.
yy
Some special characters are not supported
in subtitles.
yy
HTML tags are not supported in subtitles.
yy
Subtitles in languages other than the supported languages are not available.
yy
The screen may suffer temporary interruptions (image stoppage, faster playback, etc.)
when the audio language is changed.
yy
A damaged movie file may not be played
correctly, or some player functions may not
be usable.
yy
Movie files produced with some encoders
may not be played correctly.
yy
If the video and audio structure of recorded
file is not interleaved, either video or audio is
outputted.
yy
Videos with resolutions higher than
1920X1080@25/30P may not work properly
depending on the frame.
yy
Movie files other than the specified types and
formats may not work properly.
yy
Max bitrate of playable movie file is 20 Mbps.
(only, Motion JPEG : 10 Mbps)
yy
We do not guarantee smooth playback of
profiles encoded level 4.1 or higher in H.264/
AVC.
yy
DTS Audio codec is not supported.
yy
A movie file more than 30 GB in file size is
not supported for playback.
yy
A DivX movie file and its subtitle file must be
located in the same folder.
yy
A video file name and its subtitle file name
must be identical for it to be displayed.
yy
Playing a video via a USB connection that
doesn’t support high speed may not work
properly.
yy
Files encoded with GMC(Global Motion
Compensation) may not be played.
yy
When you are watching the movie by Movie
List function, you can adjust an image by
Energy Saving key on the remote control.
User setup for each image mode does not
operate.
Video options
1 Press MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set
Video Play., Set Video. or Set Audio. and
press OK.
NOTE
yy
Option values changed in Movie List does
not affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying the video file after stopping,
you can play from where it stopped previously.
ENTERTAINMENT
MENU options for movie list
A pop-up window will appears.
2 Press the Navigation buttons to scroll to the option and press OK.
3 Press the Navigation buttons to scroll to one of
the following options and press OK.
Set Video Play.
Option
Description
Selects your desired picture format for videos.
yy Full Mode: Files are played in full screen
Picture
mode according to the aspect ratio of
Size
video.
yy Original Mode: Files are played in their
native size.
Changes the Language Group of the auAudio
dio for video files. Files with a single audio
Language
track cannot be selected.
Subtitle
The subtitles can be turned on or off.
Language
Activated for SMI subtitles and can select
Language
the language within the subtitle.
Subtitle font selection. When set to default,
contents are displayed in the language set
in "Option - Language - Menu Language".
Option
Code
Page
Sync
Position
Size
Repeat
Description
S u b t i t l e yyLatin1 : English, Spanish,
French, German, Italian,
Language
Swedish, Finnish, Dutch,
Group
Portuguese, Danish,
Romanian, Norwegian,
Albanian, Gaelic, Welsh,
Irish, Catalan,Valencian
yyLatin2 : Bosnian, Polish,
Croatian, Czech, Slovak,
Slovenian, Serbian,
Hungarian
yyLatin4 : Estonian, Latvian,
Lithuanian
yyCyrillic : Bulgarian, Macedonian, Russian, Ukrainian, Kazakh
yyGreek : Greek
yyTurkish : Turkish
If the video is not synchronized
with the captions, it can be adjusted by 0.5 second.
Move the location of the subtitles.
Changes the subtitle font size.
Turn on/off repeat function of movie playback. When turned on, the file within the
folder will be played back repeatedly. When
turned off, if the next file name is similar to
the previous file, it can be played sequentially.
NOTE
yy
Option values changed in Movie List does not
affect Photo List and Music List.
yy
Option value changed in Photo List and Music List are changed likewise in Photo List
and Music List excluding Movie List.
yy
When replaying a video file after stopping,
select “Yes” to restart where it previously
stopped.
yy
If continuous series files exist within the folder, the next file will automatically be played.
But, this excludes cases when the Repeat
function of Movie List Option is turned “On”.
ENG
ENGLISH
1 Press MENU.
31
32
ENTERTAINMENT
Set Video.
ENGLISH
ENG
Allows you to change Video presets. (Refer to “PICTURE Settings”)
Set Audio.
Allows you to change Audio presets. (Refer to “AUDIO Settings”)
NOTE
yy
Only 10,000 of sync blocks can be supported
within the subtitle file.
yy
When playing a video, you can adjust the
Picture Size by pressing the ARC button.
yy
Subtitles in your language are only supported when the OSD menu is also in this
language.
yy
The code page options may be disabled depending on the language of the subtitle files.
yy
Select the appropriate code page for the
subtitle files.
33
ENTERTAINMENT
Viewing Photos
Using photo options
1 Press the Navigation buttons to scroll to My
Media and press OK.
Use the following options while viewing photos.
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/66]
2 Press the Navigation buttons to scroll to Photo
List and press OK.
3 Press the Navigation buttons to scroll to a
Slideshow
folder you want and press OK.
BGM
Option
Hide
Exit
4 Press the Navigation buttons to scroll to a file
you want and press OK.
Option
Slideshow
Page 1/1
Photo List
Drive1
USB2 External
Page 1/2
BGM
Go to upper folder
Go to root folder
Button
Navigation
button
OK
Description
Rotates photos clockwise (90°, 180°,
270°, 360°).
Scrolls the file.
Views the highlighted file.
PAGE
Green
button
Yellow
button
Exit
Description
Starts or stops a slideshow with selected
photos.
If there are no selected photos, all photos saved in the current folder display
during a slideshow.
Select Option to set the speed and view
mode of the slideshow.
Turns the background music on or off.
To set the background music folder,
select Option.
You can adjust Option by MENU button
on the remote control.
NOTE
Moves to the previous or next page.
yyThe supported photo size is
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than the
supported resolution size.
Go to root folder.
Go to upper folder.
Enlarges the image to 200% or 400%.
NOTE
NOTE
yy
An unsupported file displays a preview image icon only
.
yy
Abnormal files are displayed in the form of
bitmap
.
yyZoom to 200% or 400% only
work for image of 1372×772
pixel size or larger.
ENERGY
SAVING
Press the ENERGY SAVING button
repeatedly to change the brightness of
your screen.
ENG
ENGLISH
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
34
ENTERTAINMENT
Views the 3D imaging.
MENU options for photo list
ENGLISH
ENG
1 Press MENU.
(Only 3D
models)
A pop-up window will appears.
yy Slide Speed: Selects a slideshow
speed (Fast, Medium, Slow).
yy BGM: Selects a music folder for the
background music.
NOTE
yyYou cannot change the music
folder while the background
music is playing.
yyYou can only select the MP3
folder saved on the device that
currently displays the photo.
Hides the option window.
To display the options, press OK.
2 Press the Navigation buttons to scroll to the option and press OK.
3 Press the Navigation buttons to scroll to one of
the following options and press OK.
Set Photo View.
Option
Description
Selects a slideshow speed (Fast, MeSlide Speed
dium, Slow).
Selects a music folder for the background music.
Select Repeat or Random option.
BGM
Return to Photo List.
NOTE
yyYou cannot change the music
folder while the background music is playing.
NOTE
yy
Option values changed in Photo List do not
affect Movie List.
yy
Option values changed in Photo List or Music
List are changed likewise in Photo List and
Music List, but not Movie List.
Set Video.
Allows you to change Video settings. (Refer to
“PICTURE Settings”)
Set Audio.
Allows you to change Audio settings. (Refer to “AUDIO Settings”)
35
ENTERTAINMENT
Listening to Music
ENG
ENGLISH
1 Press the Navigation buttons to scroll to My Me-
5 Play music.
dia and press OK.
2 Press the Navigation buttons to scroll to Music
Page 1/1
Music List
USB2 External
M2
Page 1/2
List and press OK.
3 Press the Navigation buttons to scroll to a folder
you want and press OK.
4 Press the Navigation buttons to scroll to a file
Option
you want and press OK.
USB2 External
Button
Page 1/1
Music List
Drive1
Page 1/2
Hide
Exit
Description
Stops playback.
Plays a music file.
Pauses or resumes playback.
Skips to the previous file.
Skips to the next file.
Indicates a cursor.
Go to root folder
Go to upper folder
Exit
ENERGY
SAVING
Increases or decreases the brightness
of your screen.
Shows the Option menu.
Button
Navigation
button
OK
PAGE
Green
button
Yellow
button
Blue
button
Hides the option window.
To display the options, press OK.
Description
Scrolls through the files.
BACK
Moves to the previous menu screen.
Plays the highlighted file.
Moves to the previous or next page.
Go to root folder.
Go to upper folder.
Open music player.
It is enabled during music playback.
Tips for playing music files
yyThis unit cannot support the ID3 Tag embedded
MP3 files.
36
ENTERTAINMENT
MENU options for music list
ENGLISH
ENG
1 Press MENU.
A pop-up window will appears.
2 Press the Navigation buttons to scroll to the option and press OK.
3 Press the Navigation buttons to scroll to one of
Set Audio Play.
Select Repeat or Random option.
Set Audio.
Allows you to change Audio settings. (Refer to “AUDIO Settings”)
the following options and press OK.
NOTE
yy
Option values changed in Music List do not
affect Movie List.
yy
Option value changed in Photo List and Music
List are changed likewise in Photo List and
Music List.
NOTE
yy
The monitor will not play copy protected files.
yy
If the monitor is not in use for some time during playback, the information box as a screensaver will appear to prevent image burn.
To return to the Music list screen, press OK.
file name
Time elapsed/ Duration
3D IMAGING
37
3D Technology
This Monitor can display in 3D when the Monitor is connected to a compatible device, such as a Blu-ray 3D
Player. The viewer must wear compatible 3D glasses in order to see these images in 3D format.
Precautions to Take When Viewing 3D Images
WARNING
If you view 3D images from too close a distance, your eyesight may deteriorate.
yy
If you view images in 3D for a long period of time, you may feel dizzy or experience blurred vision.
yy
If you are pregnant, elderly, have heart problems, experience severe nausea or if you are under the
yy
influence of alcohol, we recommend that you do not view 3D images. This is because the 3D images
can cause disorientation and confusion.
Put fragile or breakable objects away when viewing 3D images.
yy
Such objects may break, or cause personal injuries when you are startled by the realistic 3D images.
yy
Parents should prevent children who are 6 years or younger from watching 3D images because
yy
viewing 3D images can be harmful to vision development.
Warning about photosensitivity seizures
yy
Some users may have a seizure or other abnormal reactions when they are exposed to a flashing light
or a particular pattern in a video game or film. If anyone in your family has a history of epilepsy or has
ever experienced any kind of seizure, please consult your doctor before viewing 3D images. If you
exhibit any of the symptoms listed below when viewing 3D images, stop viewing immediately and have
a break.
»» Dizziness, blurred vision or facial tics, involuntary movements, twitching, blackouts, confusion and
disorientation. Please consult your doctor if such symptoms persist.
To prevent a photosensitivity seizure, please take the following precautions.
yy
»» Have a 5- to 15-minute break every hour.
»» If your left and right eye sight is significantly different, correct the sight difference first.
»» You should be able to see all of the screen at eye level.
»» If you experience headaches, fatigue or dizziness, stop viewing and have a rest.
»» Do not view 3D images when you are tired or ill.
ENGLISH
3D IMAGING (Only 3D Models)
38
3D IMAGING
CAUTION
ENGLISH
3D is a technology that displays an image based on binocular disparity, giving the image depth. For
yy
optimal 3D experience, wear the 3D glasses provided with the product and keep the optimal viewing
angle and distance.
When Using 3D Glasses
CAUTION
Do not use the 3D glasses to replace your corrective glasses, sunglasses or protective goggles.
yy
Do not store 3D glasses in very hot or very cold conditions. If you do, this may cause them to become
yy
distorted. Do not use distorted glasses.
Do not drop objects onto the 3D glasses. Do not drop or bend the glasses.
yy
Since the lenses of the 3D glasses are easily scratched, make sure to clean only with a soft cloth.
yy
Shake off any dust before using the cloth
Do not scratch the surface of the lens(Polarized film) of 3D glasses with a sharp tool or wipe the lens
yy
with chemicals.
Be careful not to poke your eye out with the frames of the 3D glasses.
yy
Please use 3D glasses certified by LG Electronics.
yy
The lens of the 3D glasses is different from those of general glasses, and is very thin. Therefore be
yy
careful with the glasses as the lens can be popped out easily.
Be careful of the edges of the glass frame when putting on the 3D glasses.
yy
3D IMAGING
39
3D Imaging Viewing Range
1
2
No.
1
2
Description
Adjust the product height to allow you to view images at the optimal viewing angle (D).
Adjust your distance from the SET to allow you to view images from the optimal distance (L).
Mode
Optimal
Viewing Angle
(D)
Size
Configuration
Optimal Viewing Distance (L)
(From the middle of multiple
screens)
When
watching 3D
images
30°
686 mm
Landscape: one or more
Portrait: one
Landscape: one or more
Portrait: two
Landscape: one or more
Portrait: three
1,280 mm or longer
1,372 mm
2,058 mm
2,560 mm or longer
3,840 mm or longer
NOTE
yy
When you are outside the optimal viewing angle or optimal viewing distance, 3D images may look overlapped or not be displayed properly in 3D.
yy
3D crosstalk may occur depending on the depth of 3D content.
ENGLISH
Monitor size, viewing angle & other circumstances may change the viewing distance and the angle of view.
40
3D IMAGING
Viewing 3D Imaging
ENGLISH
1 Play the video produced in 3D.
2 Press 3D.
3 Wear the 3D glasses.
4 Press the Navigation buttons to scroll the shape and press OK.
5 Press the Navigation buttons to scroll the OK and press OK.
Mode
2D
3D
Description
Changed from 2D imaging to 3D imaging.
2D
3D
Top & Bottom
Side by Side
Frame Sequential
6 Press 3D button to 2D Off or 3D Off.
Mode
Description
3D
2D
Displays images in 2D without any 3D effects.
2D
3D
Displays images in 3D.
3D Off
Displays images in original format.
Cancel
Close the pop-up window.
NOTE
To watch 3D images, set your media player (e.g. Windows Media Player or other players) to full
yy
screen mode. Otherwise, 3D images will not be displayed properly.
41
3D IMAGING
3D Mode Setting Option
3D Mode Setting
3D Picture Correction
2 Press the Navigation buttons to scroll to one of the
3D Depth
following options and press OK
◄
Off
◄
◄
Left/Right
◄
15
3D Viewpoint
OK
0
End 3D video
The available Programme settings are described in the following:
Option
Description
3D-On-Start
Setting
Enables the 3D mode automatically when the SET starts.
3D Picture
Correction
Select Left/Right or Right/Left.
Select the screen with 3D video with better visibility.
3D Depth
Adjusts the stereoscopic effect of the 3D image converted from a 2D image.
3D Viewpoint
Moves the 3D image to the front and back to adjust the 3D perspective view.
NOTE
The Image View Mode option is disabled when 2D images are converted into 3D.
yy
The 3D Depth option is enabled when 2D images are converted into 3D.
yy
You cannot enter the Main menu while watching 3D imaging mode.
yy
CAUTION
Some menus may not work in 3D imaging mode.
yy
The 3D imaging is disabled automatically when switching input source.
yy
The screen may not be displayed properly if you view 2D images in 3D imaging mode.
yy
3D effect can be seen when 3D Mode is selected appropriately for the 3D input signal supplied to the
yy
Monitor.
When watching a 3D movie from the USB device, Picture Mode is not supported.
yy
ENGLISH
3D-On-Start Setting
1 Press 3D SETTING to access the Pop-Up menus.
42
3D IMAGING
Supported 3D input formats
ENGLISH
Input
HDMI/Display
Port
Signal
1080p
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Supported 3D Formats
1920*1080
53.95 / 54
23.98 / 24
Frame packing (HDMI Only)
1920*1080
67.5
60
Side by Side(half), Top & bottom
Single Frame Sequential
1920*1080
27
24
Side by Side(half), Top & bottom
1920*1080
33.7
30
Side by Side(half), Top & bottom
1080i
1920*1080
33.7
60
Side by Side(half), Top & bottom
720p
1280*720
89.9 / 90
59.94/60
Frame packing (HDMI Only)
1280*720
45
60
Side by Side(half), Top & bottom
1280*720
44.772
59.855
Side by Side(half), Top & bottom
RGB
-
1920*1080
67.5
60
Side by Side, Top & Bottom
DVI
-
1920*1080
67.5
60
Side by Side, Top & Bottom
-
1280*720
44.772
59.855
Side by Side, Top & Bottom
1080p
1920*1080
33.75
30.000
Side by Side, Top & Bottom
USB
NOTE
To play videos and media in HDMI 3D Frame Packing, HDMI 3D Side by Side or HDMI 3D Top &
yy
Bottom, the player needs to support these formats.
Any image inputted in the HDMI 1.4 3D format is automatically converted into 3D.
yy
When a 3D image is converted to 2D, the left and right borders of the image may appear truncated
yy
depending on the content file.
The 2D → 3D mode is available for all input modes.
yy
When the input source is changed, 3D mode is automatically disabled.
yy
When viewing multiple photos stored on the USB device, the conversion from 2D to 3D is maintained.
yy
When viewing multiple video files stored on the USB device, the 3D mode is also maintained.
yy
If the screen calibration is not performed in RGB input, 3D images may not be displayed properly.
yy
CUSTOMIZING SETTINGS
Accessing Main Menus
MARK
ARC
PSM
1 Press MENU to access the main menus.
P
BRIGHT A
NESS G
E
MUTE
MENU
2 Press the Navigation buttons to scroll to one of the following menus and
press OK.
S.MENU
OK
BACK
3 Press the Navigation buttons to scroll to the setting or option you want
and press OK.
AUTO
TILE
EXIT
ID
ON
OFF
PSM
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
PICTURE (See p.44)
Adjusts the image size,
quality, or effect.
PICTURE
OPTION (See p.49)
Customizes the general
settings.
OPTION
AUDIO (See p.47)
Adjusts the sound quality,
effect, or volume level.
AUDIO
NETWORK
NETWORK (See p.54)
Sets up the network
setting.
TIME
MY MEDIA
TIME (See p.48)
Sets the time, date, or
Timer feature.
MY MIDIA (See p.26)
Display and play movie,
photo and music content
stored on your USB
ENG
ENGLISH
CUSTOMIZING SETTINGS
43
44
CUSTOMIZING SETTINGS
PICTURE Settings
PICTURE
Move
OK
ENGLISH
ENG
• Set 3D Video
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to PICTURE and
press OK.
ꔋ
• Aspect Ratio : 16:9
•
: Off
Energy Saving • Smart Energy Saving : Off
• Picture Mode : Standard
• Backlight • Contrast option you want and press OK.
• Brightness 50
-To return to the previous level, press BACK.
• Sharpness 50
• Color 60
• Tint 0
R
G
• Color Temp. 0
W
C
• Advanced Control
• Picture Reset
• TruMotion
: Low
3 Press the Navigation buttons to scroll to the setting or
4 When you are finished, press EXIT.
When you return to the previous menu, press
BACK.
70
100
• Screen
The available picture settings are described in the following:
Setting
Description
Set 3D Video
(Only 3D
model)
Sets the 3D imaging option.
Aspect Ratio
Changes the image size to view images at its optimal size (See p.21).
Sets to automatically adjust the screen brightness corresponding to the surroundings.
Energy Saving Level
Smart Energy
Saving
Picture Mode
Off
Disables Energy Saving function.
Minimum/
Medium/
Maximum
Selects the brightness level of the backlight.
Screen Off
The screen turns off in 3 seconds.
Adjusts the backlight and contrast depending on the screen brightness.
Level
On
Enables the Smart Energy Saving function to save power consumption as much
as the value set in the smart energy saving rate.
Off
Disables the Smart Energy Saving function.
Selects one of the preset image or customizes options in each mode for the best Monitor set screen
performance. You are also able to customize advanced options of each mode.
The available preset picture modes vary depending on the Monitor set .
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the contrast,
brightness, Color, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video image for a cinematic look to enjoy movies as if you are in a
movie theater.
Sport
Optimizes the video image for high and dynamic actions by emphasizing primary
Colors such as white, grass, or sky blue.
Game
Optimizes the video image for a fast gaming screen such as PCs or games.
45
CUSTOMIZING SETTINGS
Setting
Description
Customizes the PC display options in RGB mode.
Option
Resolution
Selects a proper resolution. See “Customizing PC display options”.
Auto Configure
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the configuration is
in progress.
Position/Size/
Phase
Adjusts the options when the picture is not clear, especially when characters are
shaky, after the auto configuration.
Reset
Restores the options to the default setting.
Basic image options
Setting
Description
Backlight
djusts the brightness of the screen by controlling the LCD backlight. If you decrease the
A
brightness level, the screen becomes darker and the power consumption will be reduced
without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast when the
bright part of the picture is saturated.
Brightness
Adjusts the base level of the signal in the picture. You may use Brightness when the dark part
of the picture is saturated.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Color
Adjusts intensity of all colors.
Tint
Adjusts the balance between red and green levels.
Color Temp.
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.
Advanced Control
Customizes the advanced options. Refer to the Advanced image options. (See p.46).
Picture Reset
Restores the options to the default setting.
TruMotion
Corrects images to display smoother motion sequences.
TruMotion
• Low : De-Judder / De-Blur value is set to 3.
• High : De-Judder / De-Blur value is set to 7.
• De-Judder
• User : De-Judder / De-Blur can be set manually.
• De-Blur
-D
e-Judder : This function adjusts juddering of
the screen.
- De-Blur : This function adjusts and eliminates blurring of the screen.
◄
Low
►
3
3
NOTE
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game
yy
the subsequent menus will be automatically set.
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.
yy
When using the Smart Energy Saving function, the screen may look saturated in the white area of a
yy
still image.
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is
yy
disabled.
OK
ENG
ENGLISH
SCREEN
(In RGB
Mode Only)
46
CUSTOMIZING SETTINGS
Advanced Control
ENGLISH
ENG
Setting
Dynamic
Contrast
(Off/High/
Medium/Low)
Description
Adjusts the contrast to keep it at the best level according to the brightness of the screen. The
picture is improved by making bright parts brighter and dark parts darker. (This function can be used
only under Component.)
Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances
(Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (This function can
be used only Component.)
Clear White
(Off/High/Low)
Make the white area of screen brighter and more white.
Skin Color
(-5 to 5)
It detects the skin area of video and adjusts it to express a natural skin color.
Noise
Reduction
(Off/High/
Medium/Low)
Reduces screen noise without compromising video quality. (This function can be used only under
Component.)
Digital Noise
Reduction
(Off/High/
Medium/Low)
This option reduces the noise produced while creating digital video signals.
Gamma
(High/Medium/
Low)
Set your own gamma value. On the monitor, high gamma values display whitish images and low
gamma values display high contrast images.
Black Level
(High/Low)
Low: The picture of the screen gets darker.
High: The picture of the screen gets brighter.
Set black level of the screen to proper level.
(Function works in the following mode - Component, HDMI-DTV)
Film Mode
(On/Off)
This function provides the optimal picture quality for watching a movie.
CUSTOMIZING SETTINGS
AUDIO Settings
AUDIO
1 Press MENU to access the main menus.
Move
• Balance 2 Press the Navigation buttons to scroll to AUDIO and press
OK.
3 Press the Navigation buttons to scroll to the setting or
OK
: Off
ꔋ
0
L
• Sound Mode : Standard
• Infinite Surround : Off
• Treble 50
• Bass 50
R
• Reset
option you want and press OK.
• Digital Audio Input : Audio In
• Speaker -To return to the previous level, press BACK.
: Off
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available audio options are described in the following:
Setting
Description
Clear Voice ll
By differentiating the human sound range from others, it helps users listen to human voices better.
Balance
Adjusts balance between the left and right speakers according to your room environment.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Mode
Standard
The most commanding and natural audio.
Music
Select this option to enjoy the original sound when listening to the music.
Cinema
Select this option to enjoy sublime sound.
Sport
Select this option to watch sports broadcasting.
Game
To enjoy dynamic sound when playing a game.
NOTE
If sound quality or volume is not at the level you want, it is recommended to
yy
use a separate home theater system or amplifier to cope with different user
environments.
Option
Infinite Surround
LG's Infinite Surround option provides 5.1 channel stereo sound from two
speakers.
Treble
Controls the dominant sounds in the output. When you turn up the treble, it
will increase the output to the higher frequency range.
Bass
Makes the output sound softer. When you turn up the bass, it will increase
the output to the lower Frequency.
Reset
Resets the sound mode to the default setting.
Digital Audio
Input
HDMI/DisplayPort: Outputs the sound of digital signal from HDMI and display ports through the
monitor speaker.
Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports
to the Audio In port.
Speaker
ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.)
OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.
ENG
ENGLISH
• Clear Voice II 47
48
CUSTOMIZING SETTINGS
TIME Settings
TIME
Move
ENGLISH
ENG
• Clock
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to TIME and press
OK.
OK
ꔋ
• Off Time : Off
• On Time : Off
• Sleep Timer : Off
• Power On Delay : Off
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
• Auto Off
: 15 min.
• Automatic Standby: 4hours
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available time settings are described in the following:
Setting
Description
Clock
Sets the time feature.
On/Off Time
Sets the time to turn on or off the Monitor set.
Sleep Timer
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn
it on again, the Sleep Timer will be set to off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually
to prevent overload.
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15
minutes.
Automatic
Standby
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.
NOTE
yyOnce the on or off time is set, these functions operate daily at the preset time.
yyThe scheduled power-off function works properly only when the device time is set correctly.
yyWhen the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time
if the set is turned on, and vice versa if the set is turned off.
49
CUSTOMIZING SETTINGS
OPTION Settings
OPTION
Move
OK
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to OPTION and press
OK.
ꔋ
• ISM Method : Normal
• DPM Select
: On
• Fail Over
: Off
• Portrait Mode
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
• Factory Reset
• Set ID
:1
• My Media Setting
• Tile Mode
-To return to the previous level, press BACK.
• Fan
4 When you are finished, press EXIT.
• Product/Service Info.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Language
To choose the language in which the control names are displayed.
ISM Method
A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods
could result in a ghost image remaining even when you change the image. Avoid allowing a fixed
image to remain on the screen for a long period of time.
Setting
Normal
Leave on normal if you don't foresee image burn in being a problem.
Orbiter
May help prevent ghost images. However, it is best not to allow any fixed
image to remain on the screen. To avoid a permanent image on the screen,
the screen will move every 2 minutes.
Inversion
This function inverts the panel color of the screen. The panel color is
automatically inverted every 30 minutes.
White Wash
White wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
DPM Select
A user can choose to turn the power saving mode on / off.
Fail Over
If there is no input signal, it automatically switches to another input with signal.
Setting
Off
Stops auto switch of the input source.
Auto
Switches to another input source with video signal if no video signal comes
from the current input source.
Manual
Selects the priority of input source for auto switch.
When several input sources are found, the input source with a higher priority
will be selected.
ENG
ENGLISH
• Language
50
CUSTOMIZING SETTINGS
Setting
Description
Rotate OSD clockwise (90°,270°)
Option
Off
Disables the Portrait mode.
90°
Rotate OSD clockwise 90°.
270°
Rotate OSD clockwise 270°.
ꔋ
:1
Move
ꔋ
OK
90°
• Language
• ISM Method • DPM Select
• Fail Over
• Factory Reset
• Set ID
• Tile Mode
• PIP/PBP
Move
: Normal
: On
: Off
:1
: Normal
: On
: Off
OK
OPTION
• Language
• ISM Method • DPM Select
• Fail Over
• Factory Reset
• Set ID
• Tile Mode
• PIP/PBP
OPTION
ENGLISH
ENG
Portrait mode
270°
Factory Reset
Select this option to return to the default factory settings.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 255) using the button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
My Media Setting
Activates or deactivates the DivX VOD registration code.
It also provides the product's DivX VOD registration code and registration guide.
NOTE
yy
While you are checking the registration code, some buttons may not work.
yy
If you use the DivX registration code of another device, you cannot play the
rented or purchased DivX file. Make sure to use the DivX registration code
assigned to your Monitor.
yy
The video or audio files that are not converted by the standard DivX codec
may be corrupted or not be played.
yy
The DivX VOD code allows you to activate up to 6 devices under one account.
Once the deregistration is executed, you must register your device again to
yy
see DivX® VOD contents.
CUSTOMIZING SETTINGS
Setting
Description
Tile Mode
To use this function
- Must be displayed with various other products.
- Must be in a function that can be connected to RGB Cable by distributor and
RS-232C.
Tile mode and choose Tile alignment and set the ID of the current product to
set location.
* Only after pressing the SET button the adjustments made to the settings will
be saved.
- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)
- 15 x 15 available.
- Configuration of an integration screen is also available as well as
configuration of One by one Display.
NOTE
yyTo use the Tile Mode when watching 3D images, select the 3D mode first and set the Tile
Mode.
Fan
Auto Config.
Sets to adjust the screen position, clock, and phase automatically.
The displayed image may be unstable for a few seconds while the
configuration is in progress.
Position
Moving the screen position horizontally and vertically.
Size
Adjust the horizontal and vertical size of the screen taking into account the size
of the bezel.
Natural
The image is omitted by the distance between the screens to be naturally
shown.
Reset
Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to
Full screen.
Setting
Mode
This option indicates the monitor's internal temperature and controls the fan.
• Auto: Switches the fan on and off according to the set temperature.
• On: The fan is always switched on.
• Manual: Switches the fan on and off according to user settings.
Hysteresis
The difference in temperature between when the fan is switched on and when
it is off.
Set Temperature
Set the temperature at which the fan is switched on.
Current
Temperature
Current temperature inside the set.
NOTE
yyWe recommend that you use the Auto mode to prevent any malfunctions resulting from
incorrect fan settings.
yyIf the interior temperature of the set exceeds 80°C, the set will be turned off automatically
for safety reasons.
Product/Service
Info.
Displays the model name, software version, serial number, MAC address and home page.
ENG
ENGLISH
Tile Mode
51
52
CUSTOMIZING SETTINGS
Tile Mode
ENGLISH
ENG
This monitor can be tiled with additional monitors to create a large tiled display.
Off
When the Tile Mode
option is disabled
1X2
When using 2 monitors
ID 1
3X3
When using 9 monitors
2X2
When using 4 monitors
ID 2
ID 1
ID 2
ID 1
ID 2
ID 3
ID 3
ID 4
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
Tile ID
4X4
When using 16 monitors
5X5
When using 25 monitors
ID 1
ID 2
ID 3
ID 4
ID 1
ID 2
ID 3
ID 4
ID 5
ID 5
ID 6
ID 7
ID 8
ID 6
ID 7
ID 8
ID 9
ID 10
ID 9
ID 10
ID 11
ID 12
ID 11
ID 12
ID 13
ID 14
ID 15
ID 13
ID 14
ID 15
ID 16
ID 16
ID 17
ID 18
ID 19
ID 20
ID 21
ID 22
ID 23
ID 24
ID 25
Tile Mode - Natural mode
When active, the part of the image that would normally be displayed in the gap between the monitors is
omitted.
Before
After
CUSTOMIZING SETTINGS
53
Picture ID
2 If you press the left/right buttons or press the
ON button repeatedly, the Picture ID cycles
through OFF and 1 to 4. Assign the ID you
want.
Picture ID
Off
◀
▶
AUDIO
(RGB/DVI)
RS-232C OUT
AUDIO
(RGB/DVI)
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C OUT
RS-232C IN
RS-232C IN
Close
RS-232C OUT
RS-232C IN
REMOTE
CONTROL IN
RS-232C IN
RS-232C IN
RS-232C IN
REMOTE
CONTROL IN
POWER
ENERGY
MONITOR
IR Receiver
SET ID:1
INPUT
OFF
ON
.,!
GHI
PQRS
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
SET ID:2
DEF
MNO
Picture ID
◄
WXYZ
Off
►
Close
If you assign the Set ID to each set with
yy
multi-vision, and then assign the Picture ID
using the red button on the remote control,
POWER
the key command
is displayed for the set
with the same Set ID and Picture ID. A set
with differentMONITOR
Set IDsENERGY
and INPUT
Picture IDs cannot
ON byOFF
be controlled
IR signals.
The maximum valueSAVING
of the Picture ID can be
yy
set in the Total
. , ! Set ID
ABC menu.
DEF
Please refer to the Installation Manual for
yy
GHI
more information
onJKLTotal MNO
Set ID assignment.
PQRS
1/a/A
MARK
3D
BRIGHT
NESS
P
A
G
E
SET ID:4
2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture.
MUTE
MENU
AUTO
S.MENU
1 Press the red ON button on the remote control
to assign the PictureOKID.
BACK
TILE
EXIT
ID
ON
TUV
-*#
CLEAR
WXYZ
MARK
ARC
SET ID:3
OFF
PSM
NOTE
ARC
3D
P
BRIGHT A
NESS G
E
For example, if the
Picture ID is assigned to
yy
MUTE
2, the upper right display (Set ID: 2) can be
AUTO
S.MENU
controlled MENU
by IR signals.
For each set, you can change the settings
yy
for the PICTURE, AUDIO, TIME, NETWORK
and MY MEDIA menus
or the hot keys on
OK
the remote control.
If you press the green OFF button for Picture
yy
IDs, the Picture IDs for all sets are turned off.
EXIT
TILE
If you thenBACK
press any
button
on the remote
ID
control, all ON
sets OFF
will start working again.
Picture ID will be disabled while using the
yy
MY MEDIA menu.
PSM
ENG
ENGLISH
Picture ID is used to change the settings of a
specific display using a single IR receiver for
multi-vision. The set receiving the IR signal
communicates with another set via an RS232
connection. Each set is identified by a Set ID. If
you assign the Picture ID using the remote control,
only displays with the same Picture ID and Set ID
can be controlled remotely.
54
CUSTOMIZING SETTINGS
NETWORK Settings
NETWORK
Move
ENGLISH
ENG
• Player Name Setting
1 Press MENU to access the main menus.
2 Press the Navigation buttons to scroll to NETWORK and
press OK.
• Network Setting
: None
• Network Status
: Not connected
• Server IP Setting
• Server IP Status
: Not connected
3 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
-To return to the previous level, press BACK.
4 When you are finished, press EXIT.
When you return to the previous menu, press BACK.
The available option settings are described in the following:
Setting
Description
Player Name
Setting
Sets the player name used in SuperSign Manager.(Up to 20 characters)
Network Setting
Configure the network settings.
Network Status
Display the network status.
- Internet is connected : Externally connected
- Network is connected : Only internally connected
- Not connected : When there is no network connection
Server IP Setting
Sets the IP address of the computer (server) on which SuperSign Manager is installed.
Server IP Status
Displays the connection status with the server.
- Not connected : When there is no network connection with SuperSign server
- Waiting for approval : When network connection with SuperSign server has been made, but
access to server has not been approved by the server
- Rejected : When network connection with SuperSign server has been made, but access to
server has been rejected by the server
- Internet is connected : When network connection with SuperSign server has been made and
access to server has also been approved by the server
CAUTION
When setting the Player Name, input delay may occur if you press the buttons on the remote control
yy
continuously.
The Player Name Setting, Server IP Setting, Server IP Status settings may not be supported
yy
depending on the model.
OK
ꔋ
MAKING CONNECTIONS
55
MAKING CONNECTIONS
1 Find an external device you want to connect to your Monitor set shown on the following illustration.
2 Check the connection type of the external device.
3 Go to the appropriate illustration and check the connection details.
HD Receiver
HDMI - See p.56
DVI - See p.56
AV - See p.57
Component - See p.57
DVD
HDMI - See p.56
DVI - See p.56
AV - See p.57
Component - See p.57
VCR
AV - See p.57
Component - See p.57
Speaker
USB
Memory storage – See p.26
PC
HDMI - See p.17
DVI - See p.17
RGB - See p.16
LAN - See p.58
Display Port - See p.18
Camcorder/Camera
HDMI - See p.56
DVI - See p.56
AV - See p.57
Component - See p.57
Gaming device
HDMI - See p.56
AV - See p.57
Component - See p.57
NOTE
If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.
yy
ENG
ENGLISH
Connect various external devices to the ports on the Monitor set’s back panel.
56
MAKING CONNECTIONS
ENGLISH
ENG
Connecting to a HD receiver,
DVD, Camcorder, Camera,
Gaming Device or VCR player
HDMI Connection
Transmits the digital video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the HDMI
cable as shown on the following illustration.
Connect a HD receiver, DVD, or VCR player to the
Monitor set and select an appropriate input mode.
Back of the product.
DVI Connection
DVI IN
RGB
/COMPONENT OUT
Transmits the digital video signal from an external
device to the Monitor set. Connect the external
device and the Monitor set with the DVI cable as
shown in the following illustration. To transmit an
audio signal, connect an optional audio cable.
AUDIO
IN
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
Back of the product.
DVI IN
RGB
/COMPONENT OUT
AUDIO
IN
(not included)
/DVI
RGB
/COMPONENT IN
REMOTE
CONTROL IN
(not included)
NOTE
Use a High Speed HDMI™ Cable.
yy
High Speed HDMI™ Cables are tested to
yy
carry an HD signal up to 1080p and higher.
MAKING CONNECTIONS
57
AV(CVBS) Connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with the
RGB-Component cable as shown in the following
illustration.
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect
the external device and the Monitor set with
the Composite cable as shown in the following
illustration.
Back of the product.
RGB
/COMPONENT OUT
Back of the product.
RGB
/COMPONENT OUT
AUDIO
IN
AUDIO
IN
COMPOSITE
COMPOSITE
AUDIO
AUDIO
IN
IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
REMOTE
REMOTE
REMOTE
CONTROL IN
CONTROL IN
(not included)
CONTROL IN
REMOTE
CONTROL IN
(not included)
(not included)
(not included)
VIDEO OUT
VIDEO OUT
NOTE
When connecting to the Component port
yy
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
NOTE
If input signals are received through the AV
yy
cable, multiple monitors cannot be connected
via the RGB OUT port.
Input signal may be degraded or lost when
yy
multiple monitors are connected.
For Component, in general, up to 3 monitors
yy
can be connected via the Component Out
port (RGB Shared) if the signal is stable and
there is no cable loss.
If you want to connect more than this number
yy
of monitors, we recommended that you use a
distributor.
ENG
ENGLISH
Component Connection
58
MAKING CONNECTIONS
Connecting to the LAN
Connecting to a USB
ENGLISH
ENG
Connect a USB storage device such as a USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files.
LAN Connection
A Using a router (Switch)
LAN
Switch
Monitor Set
PC
Network
B Using the Internet
LAN
Monitor Set
Network
PC
or
MAKING CONNECTIONS
59
Daisy Chain Monitors
RGB Cable
15-pin D-Sub Signal Cable
(Max 3m)
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT OUT
RGB
/COMPONENT
IN
RGB
/COMPONENT IN
RGB
/COMPONENT
IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
RGB
/COMPONENT IN
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
DVI Cable
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI OUT
DVI OUT
DVI IN
DVI IN
DVI Cable
(Max 3m)
Monitor SET 1
Monitor SET 2
Monitor SET 3
Monitor SET 4
NOTE
When multiple monitors are connected in RGB input, it is recommended to use a distributor to avoid
yy
signal degradation and cable loss.
For DVI, in general, up to 12 monitors can be connected via the DVI Out port (at the recommended
yy
resolution) if the signal is stable and there is no cable loss.If you want to connect more than this
number of monitors, we recommended that you use a distributor.
When the tile mode is configured via DVI cables, only the monitor that receives first signals can play
yy
HDCP-encrypted content. (The DVI Out port does not support HDCP.)
If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)
yy
booster or DVI (RGB) optical cable.
If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via
yy
the DVI Out port.
ENG
ENGLISH
Use this function to share the RGB video signal with other monitors without having to use a separate signal
splitter box.
• To use different products connected to each other Connect one end of the signal input cable (15-pin
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN
connector of other products.
60
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
No image is displayed
Problem
The product does not power on.
Power is on, but the screen
appears extremely dark.
Does the 'Invalid Format'
message appear?
oes the 'No signal' message
D
appear?
Resolution
yy See if the power cord is properly connected to the outlet.
yy Adjust brightness and contrast again.
yy Backlight may need repair.
yy The signal from the PC (video card) is out of the vertical or horizontal
frequency range of the product. Adjust the frequency range by
referring to the Specifications in this manual.
* Maximum resolution
RGB : 1920 x 1080(60 Hz)
HDMI/DVI/DP : 1920 x 1080(60 Hz)
yy The signal cable between PC and product is not connected. Check
the signal cable.
yy Press the 'INPUT' menu in the remote Control to check the input
signal.
'Unknown Product' message appears when the product is connected.
Problem
Did you install the driver?
Resolution
yy See if the plug&play function is supported by referring to the video
card user manual.
TROUBLESHOOTING
61
The screen image looks abnormal.
Resolution
Is the screen position wrong?
yy D-Sub analog signal - Press the "AUTO" button in the remote control
to automatically select the optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Position OSD
menu.
yy See if the video card resolution and frequency are supported by the
product. If the frequency is out of range, set to the recommended
resolution in the Control Panel "Display" Setting menu.
Do thin lines appear on the
yy D-Sub analog signal - Press the "AUTO" button in the remote control
background screen?
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Clock OSD
menu.
Horizontal noise appears or the yy D-Sub analog signal - Press the "AUTO" button in the remote control
characters look blurred.
to automatically select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory, use the Phase OSD
menu.
The screen is displayed
yy The proper input signal is not connected to the signal port. Connect
abnormally.
the signal cable that matches with the source input signal.
After-image appears on the product.
Problem
After-image appears when the
product is turned off.
Resolution
yy If you use a fixed image for a long time, the pixels may be damaged
quickly. Use the screen-saver function.
The audio function does not work.
Problem
No sound?
Sound is too dull.
Sound is too low.
Resolution
yy See if the audio cable is connected properly.
yy Adjust the volume.
yy See if the sound is set properly.
yy Select the appropriate equalize sound.
yy Adjust the volume.
ENG
ENGLISH
Problem
62
TROUBLESHOOTING
Screen color is abnormal.
ENGLISH
ENG
Problem
Resolution
Screen has poor color resolution yy Set the number of colors to more than 24 bits (true color) Select
(16 colors).
Control Panel - Display - Settings - Color Table menu in Windows.
creen color is unstable or
S
mono-colored.
yy Check the connection status of the signal cable. Or, re-insert the PC
video card.
Do black spots appear on the
screen?
yy Several pixels (red, green, white or black color) may appear on the
screen, which can be attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
Problem
The power suddenly turned off.
Resolution
yy Is the sleep timer set?
yy Check the power control settings. Power interrupted.
TROUBLESHOOTING WHEN USING 3D MODE
63
I can see a swirling oil-like pattern on the screen when the monitor is turned off.
I can see a swirling oil-like pattern on the Monitor when the Monitor is turned off.
This is caused by the interference of external light in the air layer between the LCD surface and 3D filter.
The pattern becomes almost invisible when you turn on the power again.
I cannot see 3D image properly
Problem
Resolution
If you are not using the glasses
provided with the Monitor.
yy When you view 3D images with this Monitor, it is very important
that you use the glasses provided with the Monitor. The glasses are
designed to compensate optically for the 3D filter attached to the
surface of the Monitor. If you wear third-party glasses, you may not
see 3D images properly on the Monitor.
yy The optimal vertical viewing angle for this product is 30° and the
optimal horizontal angle 178°. The optimal viewing distance for 3D is
128 cm from the monitor (for a single set). When you view 3D images
outside the optimal viewing angle or viewing distance, the images may
look overlapped or not be displayed properly in 3D.
If you view 3D images outside
the optimal viewing angle or
distance.
I cannot see 3D but only 2D images.
Action
This Monitor supports both 2D and 3D modes. You can view a video in 3D if it is made in 3D. If you try to
view 2D images in 3D, they might not be displayed properly or you may experience poor picture quality.
ENGLISH
TROUBLESHOOTING WHEN USING 3D MODE
64
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
LCD Panel
Video Signal
Screen Type
1387.80 mm Wide (55 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel.
Visible diagonal size : 1387.80 mm
Pixel Pitch
0.210 mm (H) x 0.630 mm (V)
Max. Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution
RGB : 1920 x 1080 @ 60 Hz
HDMI/DVI/DP : 1920 x 1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Horizontal Frequency
RGB : 30 kHz to 68 kHz
HDMI/DVI/DP : 30kHz to 68 kHz
Vertical Frequency
RGB : 56 Hz to 75 Hz
HDMI/DVI/DP : 56 Hz to 60 Hz
Synchronization Type
Separate Sync, Composite(AV) Sync, Digital, SOG
Input Connector
Power
15-pin D-Sub type (RGB / Component ), HDMI/DVI/DP(digital),
Composite(AV), RS-232C, LAN, USB
Rated Voltage
AC 100-240 V~, 50 / 60 Hz 3.3 A
Power Consumption
On Mode : 240 W Typ.
Smart Energy Saving Mode : 150 W Typ.
Off Mode : ≤ 0.5 W
Dimensions
(Width x Height x
Depth) / Weight
H
W
* Wall Bracket available VESA
600 x 400
D
1215.2 mm X 686 mm X 99 mm / 33.4 Kg
Environmental
conditions
Operating Temperature
Operating Humidity
0 °C to 40 °C
10 % to 80 %
Storage Temperature
Storage Humidity
-20 °C to 60 °C
5 % to 95 %
* Applicable only for models that support the speakers
Audio
RMS Audio Output
10 W + 10 W (R + L)
Input Sensitivity
0.7 Vrms
Speaker Impedance
8Ω
Product specifications shown above may be changed without prior notice due to upgrade of product
functions.
SPECIFICATIONS
65
DTV Mode
RGB (PC) supported mode
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
Resolution
Component
HDMI/DVI
(DTV)
640 x 480
31.469
59.94
480i
o
x
o
x
1024 x 768
48.363
60
576i
1280 x 720
44.772
59.855
480p
o
o
1366 x 768
47.7
60
576p
o
o
1680 x 1050
65.290
59.954
720p
o
o
1920 x 1080
67.5
60
1080i
o
o
1080p
o
o
NOTE
HDMI/DVI/Display Port(PC) supported mode
Resolution
Horizontal
Vertical
Frequency(kHz) Frequency(Hz)
640 x 480
31.469
59.94
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
44.772
59.855
1280 x 768
47.7
60
1366 x 768
47.7
60
1280 x 1024
63.981
60.02
1680 x 1050
65.290
59.954
1920 x 1080
67.5
60
PC resolutions available as the input label
yy
option in RGB and HDMI/DVI input mode :
640 x 480 / 60 Hz, 1280 x 720 / 60 Hz, 1920
x 1080 / 60 Hz and DTV resolutions : 480p,
720p, 1080p.
NOTE
Vertical frequency: To enable the user to
yy
watch the product display, screen image
should be changed tens of times every
second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of
image display per second. The unit is Hz.
Horizontal frequency: The horizontal interval
yy
is the time to display one vertical line. When
1 is divided by the horizontal interval, the
number of horizontal lines displayed every
second can be tabulated as the horizontal
frequency. The unit is kHz.
ENG
ENGLISH
Resolution
66
CONTROLLING THE MULTIPLE MONITORS
ENGLISH
ENG
CONTROLLING THE MULTIPLE MONITORS
Use this method to connect several products to a single PC. You can control several monitors at one
yy
time by connecting them to a single PC.
In the Option menu, Set ID must be between 1 and 255 without being duplicated.
yy
Connecting the Cable
Connect the RS-232C cable as shown in the picture.
The RS-232C protocol is used for communication between the PC and product. You can turn the
yy
product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
PC
Monitor Set 1
RS-232C Configurations
8-Wire Configurations (Cross-over RS-232C cable)
PC
DCD
RXD
TXD
GND
DTR
DSR
RTS
CTS
1
2
3
5
4
6
7
8
D-Sub 9
(Female)
Set
1
3
2
5
6
4
8
7
DCD
TXD
RXD
GND
DSR
DTR
CTS
RTS
D-Sub 9
(Female)
Communication Parameter
Baud Rate : 9600 buad Rate (UART)
yy
Data Length : 8 bit
yy
Parity Bit : None
yy
Stop Bit : 1bit
yy
Flow Control : None
yy
Communication Code : ASCII code
yy
Use a crossed (reverse) cable
yy
Monitor Set 2
Monitor Set 3
Monitor Set 4
NOTE
When using 3-wire connections (nonyy
standard), an IR daisy chain cannot be
used.
CONTROLLING THE MULTIPLE MONITORS
67
Command Reference List
2
DATA
(Hexadecimal)
01
Power
k
a
00H to 01H
02
Input Select
x
b
Refer to ‘02. Input Select’
03
Aspect Ratio
k
c
Refer to ‘03. Aspect Ratio’
04
Energy Saving
j
q
Refer to ‘04. Energy Saving’
05
Picture Mode
d
x
Refer to ‘05. Picture Mode’
06
Contrast
k
g
00H to 64H
07
Brightness
k
h
00H to 64H
08
Sharpness
k
k
00H to 64H
09
Color
k
i
00H to 64H
10
Tint
k
j
00H to 64H
11
Color Temperature
x
u
00H to 64H
12
H Position
f
q
00H to 64H
13
V Position
f
r
00H to 64H
14
H Size
f
s
00H to 64H
15
Auto Configuration
j
u
01H
16
Balance
k
t
00H to 64H
17
Sound Mode
d
y
Refer to ‘17. Sound Mode’
18
Treble
k
r
00H to 64H
19
Bass
k
s
00H to 64H
20
Speaker
d
v
00H to 01H
21
Volume Mute
k
e
00H to 01H
22
Volume Control
k
f
00H to 64H
23
24
25
26
27
Time 1(Years/ Months/ Days)
f
a
Refer to ‘23. Time 1’
Time 2(Hours/ Minutes/ Seconds)
f
x
Refer to ‘24. Time 2’
Off Timer(Repeat mode/ Time)
f
e
Refer to ‘25. Off Timer’
On Timer(Repeat Mode/ Time)
f
d
Refer to ‘26. On Timer’
On Timer Input
f
u
Refer to ‘27. On Timer Input’
28
Sleep Time
f
f
00H to 08H
29
Power On Delay
f
h
00H to 64H
30
Automatic Standby
m
n
00H to 01H
31
Auto Off
f
g
00H to 01H
32
Language
f
i
00H to 0AH
33
ISM Method
j
p
Refer to ‘33. ISM Method’
34
35
36
DPM Select
f
j
00H to 01H
Fail Over Select
m
i
00H to 02H
Fail Over Input Select
m
j
Refer ‘36. Fail Over Input Select’
37
Reset
f
k
00H to 03H
38
Tile mode
d
d
00H to 01H
39
Tile Mode Check
d
z
FFH
40
Tile ID
d
i
Refer to ‘40. Tile ID’
ENG
ENGLISH
COMMAND
1
68
CONTROLLING THE MULTIPLE MONITORS
COMMAND
ENGLISH
ENG
DATA
(Hexadecimal)
1
2
e
00H to 32H
41
Tile H Position
d
42
Tile V Position
d
f
00H to 32H
43
Tile H Size
d
g
00H to 32H
44
Tile V Size
d
h
00H to 32H
45
Natural Mode (in Tile Mode)
d
j
00H to 01H
46
47
48
FAN Control
d
o
00H to 02H
FAN Fault check
d
w
FFH
Temperature Value
d
n
FFH
49
Key
m
c
Refer to ‘49. Key’
50
OSD Select
k
l
00H to 01H
51
Elapsed Time Return
d
l
FFH
52
Serial No. Check
f
y
FFH
53
S/W Version
f
z
FFH
54
55
56
White Balance Red Gain
j
m
00H to FEH
White Balance Green Gain
j
n
00H to FEH
White Balance Blue Gain
j
o
00H to FEH
57
3D Mode
x
t
Refer to ‘57. 3D Mode’
58
59
3D Mode Option Setting
x
v
Screen Mute
k
d
Refer to ‘58. 3D Mode Option Setting’
00H to 01H
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc)
yy
Volume Mute(k e), Volume Control(k f) are not executed and treated as NG.
CONTROLLING THE MULTIPLE MONITORS
69
Transmission / Receiving Protocol
[Command1][Command2][ ][Set ID][ ][Data][Cr] or
[Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
* [Command1]: First command to control the set.
* [Command2]: Second command to control the set.
* [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets
regardless of their Set ID numbers.
* [Data]: Information passed to the set.
* [Data1]: Information passed to the set.
* [Data2]: Information passed to the set.
* [Data3]: Information passed to the set.
* [Cr]: Carriage Return. ASCII code ‘0x0D’.
* [ ]: ASCII code space ‘0x20’
* If Data is FF, OSD will not be marked on the Set.
(It may cause the interface factor during SuperSign Elite-w server communication)
Acknowledgement
[Command2][ ][Set ID][ ][OK/NG][Data][x] or
[Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
* In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback
presents status about each function.
* Note : In this mode, display will send the acknowledgement after power on processing completion.
There might be a time delay between command and acknowledgement.
* No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
* If 3D mode is on, it will work only the below commands.
COMMAND
1
2
Power
k
a
Input Select
x
b
Volume Mute
k
e
Volume Control
k
f
Fail Over Select
m
i
White Balance Red Gain
j
m
White Balance Green Gain
j
n
o
White Balance Blue Gain
j
3D Mode
x
t
3D Mode Option Setting
x
v
ENG
ENGLISH
Transmission
70
CONTROLLING THE MULTIPLE MONITORS
01. Power (Command: k a)
To control power On/Off the display.
ENGLISH
ENG
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
FF: Power Status
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* In a like manner, if other functions transmit ‘FF’
data based on this format, Acknowledgement data
feedback presents status about each function.
* Note: In this mode, display will send the
acknowledgement after power on processing
completion. There might be a time delay between
command and acknowledgement.
* Refer to ‘Real data mapping’ for hexadecimal data
to decimal data.
02. Input Select (Command: x b)
To select input source for display.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data
20: AV
40: Component
60: RGB-PC
70: DVI-D(PC)
80: DVI-D(DTV)
90: HDMI(DTV)
A0: HDMI(PC)
C0: Display Port(PC)
D0: Display Port(DTV)
04. Energy Saving (Command: j q)
To control the energy saving function.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: Minimum
02: Medium
03: Maximum
05: Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
05. Picture Mode (Command: d x)
To select the picture mode.
Transmission
[d][x][ ][Set ID][ ][Data][Cr]
Data
00: Vivid
01: Standard
02. Cinema
03. Sport
04: Game
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[b][ ][Set ID][ ][OK/NG][Data][x]
* Use this feature depending on your model
03. Aspect Ratio (Command: k c)
To adjust the screen format.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data
01: 4:3
02: 16:9
04: Zoom
(AV,Component,HDMI/Display Port DTV)
09: Just Scan(720p or higher)
/1:1(RGB-PC, DVI-D, HDMI/Display Port PC)
10 to 1F: Cinema Zoom 1~16
(AV, Component,HDMI/Display Port DTV)
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
To adjust screen contrast.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Contrast 0 to 100
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE MONITORS
07. Brightness (Command: k h)
To adjust screen brightness.
Data 00 to 64: Brightness 0 to 100
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Sharpness (Command: k k)
To adjust screen sharpness.
* Only available for AV/Component input.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Sharpness 0 to 100
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
09. Color (Command: k i)
To adjust screen color.
* Only available for AV/Component input.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Color 0 to 100
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data 00~64: Tint R50 ~ G50
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
11. Color Temperature (Command: x u)
To adjust color temperature.
Transmission
[x][u][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Warm 50 to Cool 50
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
12. H Position (Command: f q)
To set the Horizontal position.
* Only available for Tile Off mode.
Transmission
[f][q][ ][Set ID][ ][Data][Cr]
Data 00~64: Min. -50 (Left) ~ Max. 50(Right)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
10. Tint (Command: k j)
To adjust screen tint.
* Only available for AV/Component input.
71
72
CONTROLLING THE MULTIPLE MONITORS
ENGLISH
ENG
13. V Position (Command: f r)
To set the Vertical position.
* Only available for Tile Off mode.
* This function only works when the Tile Mode is
disabled in RGB-PC input.
* Data range varies depending on the resolution.
Transmission
[f][r][ ][Set ID][ ][Data][Cr]
16. Balance (Command: k t)
To adjust balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Left 50 to Right 50
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
Data 00~64: Min. -50 (Bottom) ~ Max. 50(Top)
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
14. H Size (Command: f s)
To set the Horizontal size.
* Only available for Tile Off mode.
* This function only works when the Tile Mode is
disabled in RGB-PC input.
Transmission
[f][s][ ][Set ID][ ][Data][Cr]
Data 00~64: Size -50 (Scale down) ~ +50(Scale up)
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
15. Auto Configuration (Command: j u)
To adjust picture position and minimize image
shaking automatically.
* Only available for RGB input.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 01 : Set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
17. Sound Mode (Command: d y)
To select the sound mode.
Transmission
[d][y][ ][Set ID][ ][Data][Cr]
Data
01: Standard
02: Music
03: Cinema
04: Sport
05. Game
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
18. Treble (Command: k r)
To adjust treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Treble 0 to 100
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE MONITORS
19. Bass (Command: k s)
To adjust bass.
Data 00 to 64: Bass 0 to 100
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
20. Speaker (Command: d v)
To select speaker on/off.
Transmission
[d][v][ ][Set ID][ ][Data][Cr]
Data 00: Speaker Off
01: Speaker On
22. Volume Control (Command: k f)
To adjust volume.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data 00 to 64: Volume 0 to 100
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
23. Time 1(Year/ Month/ Day) (Command: f a)
To set the Time 1(Year/ Month/ Day) values.
Transmission
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data][x]
Data 100 to 14: 2010 to 2030
Data 201 to 0C: January to December
Data 301 to 1F: 1 to 31
* Enter “fa [Set ID] ff” for checking Time 1 values.
21. Volume Mute (Command: k e)
To select screen mute on/off.
24. Time 2(Hour/ Minute/ Second) (Command: f x)
To set the Time 2(Hour/ Minute/ Second) values.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 00 : Volume Mute On (Volume Off)
01 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
Transmission
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00 to 17: 00 to 23 hours
Data2 00 to 3B: 00 to 59 minutes
Data3 00 to 3B: 00 to 59 seconds
* Enter “fx [Set ID] ff” for checking Time 2 values.
** This command won’t work if Time 1 has not been
set in advance.
Acknowledgement
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
ENG
ENGLISH
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
73
74
CONTROLLING THE MULTIPLE MONITORS
ENGLISH
ENG
25. Off Timer(Repeat Mode/ Time) (Command: f e)
To set the Off Timer(Repeat mode/ Time) function.
26. On Timer(Repeat Mode/ Time) (Command: f d)
To set the On Timer(Repeat mode/ Time) function.
Transmission
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Transmission
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data1 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
Data2 00 to 17: 00 to 23 Hours
Data3 00 to 3B: 00 to 59 Minutes
* Enter “fd [Set ID] ff” for checking On Timer(Repeat
mode/ Time) values.
* Check if Time1 and Time2 have been set before
setting this function.
* On Timer Input command should be executed
followed just after executing this command to set On
Timer schedule properly.
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check current Off Timer(Repeat Mode/ Time)
function.
Transmission
[f][e][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data f1~f7: 1st~ 7th element of schedule list
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data1 f1~f7: 1st~ 7th index of schedule list
Data2 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data3 00~17: 00 ~ 23 Hours
Data4 00~3B: 00 ~ 59 Minutes
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
To check current On Timer(Repeat Mode/ Time)
function.
Transmission
[f][d][ ][Set ID][ ][Data][ ][f][f][ ][f][f][Cr]
Data f1~f7: 1st~ 7th element of schedule list
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data1 f1~f7: 1st~ 7th index of schedule list
Data2 00: Repeat Off
01: Repeat Once
02. Repeat Daily
03: Repeat from Monday to Friday
04: Repeat from Monday to Saturday
05: Repeat from Saturday to Sunday
06. Repeat on Sunday
07. Repeat on Monday
08. Repeat on Tuesday
09. Repeat on Wednesday
0A. Repeat on Thursday
0B. Repeat on Friday
0C. Repeat on Saturday
Data3 00~17: 00 ~ 23 Hours
Data4 00~3B: 00 ~ 59 Minutes
CONTROLLING THE MULTIPLE MONITORS
27. On Timer Input (Command: f u)
To set the On Timer Input function.
Data 20: AV
40: Component
60. RGB-PC
70: DVI-D
90: HDMI
C0: DISPLAY PORT
* Check if Time1, Time2, and On Timer(Repeat
Mode/ Time) functions have been set before setting
this function.
* On Timer(Repeat Mode/ Time) command should be
executed in advance this command to set On Timer
schedule properly.
28. Sleep Time (Command: f f)
To set sleep time.
Transmission
[f][f][ ][Set ID][ ][Data][Cr]
Data
00: Off
01: 10 min.
02: 20 min.
03: 30 min.
04: 60 min.
05: 90 min.
06: 120 min.
07: 180 min.
08: 240 min.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
To check current On Timer Input function.
Transmission
[f][u][ ][Set ID][ ][Data][ ][f][f][Cr]
Data f1~f7: 1st~ 7th element of schedule list
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data1][Data2][x]
Data1 f1~f7: 1st~ 7th index of schedule list
Data2 20: AV
40: Component
60. RGB-PC
70: DVI-D
90: HDMI
C0: Display Port
29. Power On Delay (Command: f h)
To set the schedule delay when the power is turned
on(unit: second).
Transmission
[f][h][ ][Set ID][ ][Data][Cr]
Data 00 : Off
01~64: Min. 1.~ Max. 100 (sec.)
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
Transmission
[f][u][ ][Set ID][ ][Data][Cr]
75
76
CONTROLLING THE MULTIPLE MONITORS
30. Automatic Standby (Command: m n)
To set the Automatic Standby function.
ENGLISH
ENG
Transmission
[m][n][ ][Set ID][ ][Data][Cr]
Data 00: Off(Auto off function doesn’t work.)
01: 4 Hours
(Display will be turned off in 4 hours)
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
33. ISM mode (Command: j p)
To select ISM method for avoiding having a fixed
image remain on screen.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data
01: Inversion
02: Orbiter
04: White Wash
08: Normal
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
31. Auto Off (Command: f g)
To set the Auto Off function.
Transmission
[f][g][ ][Set ID][ ][Data][Cr]
Data
00: Off (Auto off function doesn’t work.)
01: 15 min.
(Display will be turned off in case of no signal
for 15 minutes.)
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
34. DPM Select (Command: f j)
To set the DPM (Display Power Management)
function.
Transmission
[f][j][ ][Set ID][ ][Data][Cr]
Data 00: DPM Off
01: DPM On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
32. Language (Command: f i)
To set language for OSD.
Transmission
[f][i][ ][Set ID][ ][Data][Cr]
Data
00: Czech
01: Danish
02: German
03: English
04: Spanish(EU)
05: Greek
06: French
07: Italian
08: Dutch
09: Norwegian
0A: Portuguese
0B: Protuguese(BR)
0C: Russian
0D: Finnish
0E: Swedish
0F: Korean
10: Chinese (Mandarin)
11: Japanese
12: Yue Chinese(Cantonese)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
35. Fail Over Select (Command: m i)
To set the Fail Over function.
Transmission
[m][i][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: Auto
02: Manual
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE MONITORS
Transmission
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][ ][Data4][Cr]
Data 01 to 04(Input priority: 1 to 4)
60: RGB-PC
70: DVI-D*
90: HDMI**
C0: Display Port***
* Use 0x70 as data for DVI-D input, regardless DVID(PC) or DVI-D(DTV).
** Use 0x90 as data for HDMI input, regardless
HDMI-DTV or HDMI-PC
*** Use 0xC0 as data for Display Port input,
regardless Display Port(DTV) or Display Port(PC)
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][Data4][x]
Data1~4(Priority 1~4)
60: RGB-PC
70: DVI-D****
90: HDMI*****
C0: Display Port******
**** Returns 0x70 as Data for DVI-D port, regardless
DVI-D(PC) or DVI-D(DTV).
***** Returns 0x90 as Data for HDMI port, regardless
HDMI-DTV or HDMI-PC.
****** Returns 0xC0 as Data for Display Port,
regardless Display Port(DTV) or Display Port(PC).
38. Tile Mode (Command: d d)
To select a Tile Mode Off/ On and Tile Row/ Column
size.
* NOT available when 3D mode ON.
Transmission
[d][d][ ][Set ID][ ][Data][Cr]
Data 00 to FF: 1st byte - Tile Column value
2nd byte - Tile Row value
*00, 01, 10, 11 means Tile Mode Off.
Acknowledgement
[d][ ][Set ID][ ][OK/NG][Data][x]
Data
Description
00, 01, 10, 11
It means Tile mode Off.
12
2 x 1 (Row x Column)
13
3x1
14
4x1
...
...
FF
15 x 15
39. Tile Mode Check (Command: d z)
To check Tile Mode status.
Transmission
[d][z][ ][Set ID][ ][Data][Cr]
Data
FF: Check Tile Mode status
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]
37. Reset (Command: f k)
To execute the Picture, Screen, Audio and Factory
reset function.
* Screen reset function is only available for RGB-PC
input.
Transmission
[f][k][ ][Set ID][ ][Data][Cr]
Data
00: Picture Reset
01: Screen Reset
02: Audio Reset
03: Factory Reset
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
Data1
Data2
Data3
00: Tile Mode Off
01: Tile Mode On
00 to 0F: Tile Row Value
00 to 0F: Tile Column Value
* Row x Column will be displayed.
40. Tile ID (Command: d i)
To set Tile ID.
Transmission
[d][i][ ][Set ID][ ][Data][Cr]
Data 01 to E1: Tile ID 01 to 225**
FF: Read Tile ID
** Data could not be set over (Tile Row) x (Tile
Column)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
ENG
ENGLISH
36. Fail Over Input Select (Command: m j)
To select fail over mode.
*Only available in Fail Over manual mode.
77
78
CONTROLLING THE MULTIPLE MONITORS
ENGLISH
ENG
41. Tile H Position (Command: d e)
To set the Tile Horizontal position.
* Only available when Tile Mode On and Tile Natural
Mode Off.
* Only available after changing Tile H Size
Transmission
[d][e][ ][Set ID][ ][Data][Cr]
Data 00~32: Left -50 ~ Right 50
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
42. Tile V Position (Command: d f)
To set the Tile Vertical position.
* Only available when Tile Mode On and Tile Natural
Mode Off.
* Only available after changing Tile V Size
Transmission
[d][f][ ][Set ID][ ][Data][Cr]
Data 00~32: Bottom 0~Top 50
* Data range varies depending on the current Tile V
value.
44. Tile V Size (Command: d h)
To set the Tile Vertical size.
*Set Tile V Position to 0x00 before setting Tile V
Size.
* Only available when Tile Mode On and Tile Natural
Mode Off.
Transmission
[d][h][ ][Set ID][ ][Data][Cr]
Data 00~32: Min 0 ~ Max 50
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
45. Natural Mode (In Tile Mode) (Command : d j)
To assign the Tile Natural mode for Tiling function.
* Only available when Tile mode On.
Transmission
[d][j][ ][Set ID][ ][Data][Cr]
Data 00: Off
01: On
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
43. Tile H Size (Command: d g)
To set the Tile Horizontal Size.
*Set Tile H Position to 0x32 (50) before setting Tile H
Size.
* Only available when Tile Mode On and Tile Natural
Mode Off.
Transmission
[d][g][ ][Set ID][ ][Data][Cr]
Data 00~32: Min 0 ~ Max 50
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
46. FAN Control (Command : d o)
To set Fan control on/off.
Transmission
[d][o][ ][Set ID][ ][Data][Cr]
Data 00: Auto
01: On
02: Manual
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
CONTROLLING THE MULTIPLE MONITORS
47. FAN Fault Check (Command: d w)
To set Fan control on/off.
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[w][ ][Set ID][ ][OK/NG][Data][x]
Data 00: Fan Error
01: Fan OK
48. Temperature Value (Command: d n)
To read the inside temperature of the display.
Transmission
[d][n][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* Temperature will be shown in hexadecimal number.
49. Key (Command: m c)
To send IR remote control code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data IR_KEY_CODE
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
When display is in the standby mode, display will turn
on by Power button of remote control only.
50. OSD Select (Command: k l)
To select OSD(On Screen Display) on/off
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD Off
01: OSD On
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
51. Elapsed time return (Command: d l)
To read the panel used time.
Transmission
[d][l][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* Returned data means used hours in hexadecimal.
52. Serial No.Check (Command: f y)
To read the serial numbers.
Transmission
[f][y][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[y][ ][Set ID][ ][OK/NG][Data][x]
* Data is ASCII code.
ENG
ENGLISH
Transmission
[d][w][ ][Set ID][ ][Data][Cr]
79
80
CONTROLLING THE MULTIPLE MONITORS
53. S/W Version (Command: f z)
To read the software version.
ENGLISH
ENG
Transmission
[f][z][ ][Set ID][ ][Data][Cr]
Data FF: Data should be always ff in hexadecimal.
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
56. White Balance Blue Gain (Command: j o)
To adjust white balance blue gain.
Transmission
[j][o][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Blue gain 0 to 254
Acknowledgement
[o][ ][Set ID][ ][OK/NG][Data][x]
54. White Balance Red Gain (Command: j m)
To adjust white balance red gain.
Transmission
[j][m][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Red gain 0 to 254
Acknowledgement
[m][ ][Set ID][ ][OK/NG][Data][x]
55. White Balance Green Gain (Command: j n)
To adjust white balance green gain.
Transmission
[j][n][ ][Set ID][ ][Data][Cr]
Data 00 to FE: Green gain 0 to 254
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
57. 3D Mode (Command: x t)
To Select 3D Mode.
** 3D Depth is only available for 2D to 3D Mode.
Transmission
[x][t][ ][Set ID][ ][Data1][ ] [Data2][ ] [Data3][ ]
[Data4][Cr]
Data1 00: 3D Mode On
01: 3D Mode Off
02: 3D to 2D Mode
03: 2D to 3D Mode
Data2 00: Top and Bottom
01: Side by Side
02: Frame Sequential
Data300: 3D Picture Correction (R/L)
(Right Left Sequence)
01: 3D Picture Correction (L/R)
( Left Right Sequence)
Data4 00~14: 3D Depth 0~20
* 3D mode should be under off status before
changing mode of Data2 ~ Data4.
** 3D mode will be turned off when Data1 is 01
regardless of Data2 ~ Data4.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data1][Data2][Data3]
[Data4][x]
CONTROLLING THE MULTIPLE MONITORS
Transmission
[x][v][ ][Set ID][ ][Data1][ ][Data2][Cr]
Data100: 3D Picture Correction
01: 3D Depth
02: 3D View Point
1)
If Data1 is 00,
Data2 00: 3D Picture Correction (R/L)
(Right Left Sequence)
01: 3D Picture Correction (L/R)
(Left Right Sequence)
2)
If Data1 is 01,
Data2 00~14: Depth 0~20
3)
If Data1 02,
Data2 00~14: View Point -10~10
Acknowledgement
[v][ ][Set ID][ ][OK/NG][Data1][Data2][x]
59. Screen Mute (Command: k d)
To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 00: Screen mute off (Picture on)
01 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
ENG
ENGLISH
58. 3D Mode Option Setting (Command: x v)
To adjust 3D Mode Option.
* Only available when 3D Mode On.
** 3D Depth is only available for 2D to 3D Mode.
81
82
IR CODES
IR CODES
ENGLISH
ENG
All models do not support the HDMI/USB function.
yy
Code (Hexa)
95
08
Function
Energy Saving (
)
POWER
Note
R/C BUTTON
R/C BUTTON (ON/OFF)
0B
INPUT
R/C BUTTON
C4
Monitor On
R/C BUTTON
C5
Monitor Off
R/C BUTTON
43
MENU
R/C BUTTON
40
Up ( )
R/C BUTTON
41
Down ( )
R/C BUTTON
07
Left ( )
R/C BUTTON
06
Right ( )
R/C BUTTON
44
OK( )
R/C BUTTON
28
BACK(
5B
EXIT
R/C BUTTON
4D
PSM
R/C BUTTON
02
Volume
R/C BUTTON
03
Volume
R/C BUTTON
09
MUTE
E0
Bright
(Page UP)
R/C BUTTON
E1
Bright
(Page Down)
R/C BUTTON
10 to 19
Number Key 0 to 9
R/C BUTTON
72
Red Key (ID ON)
R/C BUTTON
71
Green Key (ID OFF)
R/C BUTTON
63
Yellow Key
R/C BUTTON
61
Blue Key
R/C BUTTON
7B
TILE
R/C BUTTON
76
ARC (4:3)
R/C BUTTON
77
ARC (16:9)
R/C BUTTON
AF
ARC (ZOOM)
R/C BUTTON
79
ARC (MARK)
R/C BUTTON
99
Auto Config.
R/C BUTTON
)
R/C BUTTON
R/C BUTTON
B1
R/C BUTTON
B0
R/C BUTTON
BA
R/C BUTTON
8F
R/C BUTTON
8E
DC
R/C BUTTON
3D MODE
R/C BUTTON
Make sure to read the Safety Precautions
before using the product.
Keep the Owner's Manual(CD) in an accessible
place for future reference.
The model and serial number of the SET is
located on the back and one side of the SET.
Record it below should you ever need service.
MODEL
SERIAL
Temporary noise is normal when powering ON or
OFF this device.
Download PDF