LG | GRB207TUJA | LG GRB207TUJA Owner’s Manual

Electrical Connections
(In the UK Only)
The wires in this mains lead are coloured in accordance with the following code :
Important
GREEN AND YELLOW : EARTH
BLUE : NEUTRAL
BROWN : LIVE
This appliance must be earthed
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed as follows :
The wire which is coloured Green and Yellow must be connected to the terminal in
the plug which is marked with the letter E or by the earth symbol(b) or coloured
Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked
with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is
marked with the letter L or coloured Red.
If a 13 amp(BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
1
Introduction
Entry
The model and serial numbers are found on the inner case or back of refrigerator
compartment of this unit. These numbers are unique to this unit and not
available to others. You should record requested information here and retain
this guide as a permanent record of your purchase. Staple your receipt here.
Date of purchase
Dealer purchased from
Dealer address
Dealer phone no.
Model no.
Serial no.
:
:
:
:
:
:
Important safety instruction
This refrigerator must be properly installed and located in accordance with the
installation instructions before it is used.
Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly
and pull straight out from the outlet.
When moving your appliance away from the wall, be careful not to roll over or
damage the power cord.
After your refrigerator is in operation, do not touch the cold surfaces in the freezer
compartment, particularly when hands are damp or wet. Skin may adhere to these
extremely cold surfaces.
Unplug the power cord from the power plug for cleaning or other cares. Never touch
it with wet hands because you can get an electric shock or be hurt.
Never damage, process, severely bend, pull out, or twist power cord because power
cord damage may cause a fire or electric shock. You have doubts on whether the
appliance is properly grounded.
Never place glass products in the freezer because they may be broken when their
inner matters are frozen.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young childeren should be supervised to ensure that they do not play with the
appliance.
Don’t use an
extension cord
If possible, connect the refrigerator to its own individual electrical outlet to prevent it and
other appliances or household lights from causing an overload that could cause a power
outage.
Accessibility of
Supply Plug
The refrigerator-freezer should be so positioned that the supply plug is accessible for
quick disconnection when accident happens.
Supply Cord
Replacement
If the supply cord is damaged, it must be replaced by the manufacturer or its service
agent or a similarly qualified person in order to avoid a hazard.
Do not modify or extend the Power Cord length.
It will cause electric shock or fire.
Warning
3
Introduction
Child entrapment
warning
DANGER : Risk of child entrapment.
Before you throw away your old refrigerator or freezer :
Take off the doors
Leave the shelves in place so that children may not easily climb inside.
The appliance is not intended for use by young children or infirm persons without
supervision.
Young children should be supervised to ensure that they do not play with the appliance.
Don’t store
Don’t store or use gasoline or other flammable vapor and liquids in the vicinity of this or
any other appliance.
Grounding (Earthing)
In the event of an electric short circuit, grounding (earthing) reduces the risk of electric
shock by providing an escape wire for the electric current.
In order to prevent possible electric shock, this appliance must be grounded
improper use of the grounding plug can result in an electric shock. Consult a qualified
electrician or service person if the grounding instructions are not completely
understood, or if you have doubts on whether the appliance is properly grounded.
Identification of parts
Freezer
compartment
Refrigerator
compartment
Milk product corner
Lamp
Shelf
Wine holder (Plastic or wire)
Door rack(1 piece or 2 piece)
Shelf
Door rack
Lamp
Shelf
Shelf
Snack corner
Refreshment center
(Optional)
Egg box
Ice separation handle
Ice making compartment
Ice box
Door rack(1 piece or 2 piece)
Shelf (Folding or Normal)
Door rack
Door rack
Vegetable drawer
Drawer
Door rack
Humidity switch
Lower cover
NOTE
•
4
If you find some parts missing from your unit, they may be parts only used in other
models.
Installation
Door removal
Electric Shock Hazard
Disconnect electrical supply to refrigerator before installing.
Failure to do so could result in death or serious
injury.
Warning
If your access door is too narrow for the
refrigerator remove the refrigerator door and
pass the refrigerator laterally.
Remove lower
cover
Lower
cover
Hinge
cover
Remove the lower cover by lifting upward.
Remove the
freezer
compartment
door
1) Removing the hinge cover by loosening the
screws. Separate all connection wires except
for the earth line after.
Upper hinge
Keeper
Upper
hinge
2) Remove the keeper by rotating it counter
clockwise () and then lifting the upper
hinge up ().
NOTE
•
When removing the upper hinge, be careful that the door does not fall forwards.
3) Remove the freezer compartment door by
lifting it upward.
Lower hinge
Remove the
refrigerator
door
1) Loosen the hinge cover screws and remove
the cover. Remove connection wire, if any,
except for the earth line.
Connection
wires
2) Remove keeper by rotating it clockwise ()
and then remove the upper hinge by lifting
it up ( ).
Keeper
Upper hinge
3) Remove the refrigerator compartment door
by lifting it up.
Pass the
refrigerator
Pass the refrigerator laterally through access
door as shown in the right figure.
6
Max
5
4
3
2
1
FRZ
TEMP
Min
1
2
REF
TEMP
3
4
5
Max
Installation
Door replacement
Mount them in the reverse sequence of removal after they pass through the access door.
Height adjustment
If the freezer
compartment door
is lower than the
refrigerator
compartment door
Level the door by inserting flat ( - type) driver into the groove of the left height adjusting
screw and rotate it to the arrow direction ( ).
If the freezer
compartment door
is higher than the
refrigerator
compartment door
Level the door by inserting flat ( - type) driver into the groove of the right height
adjusting screw and rotate it to the arrow direction ( ).
After leveling the
door height
The refrigerator doors will close smoothly by heightening the front side by adjusting
the height adjusting screw. If the doors do not close correctly, performance may be
affected.
Next
1. Wipe off all dust accumulated during shipping and clean your appliance thoroughly.
2. Install accessories such as the wine corner, cover evaporating tray, etc., in their
proper places. They are packed together to prevent possible damage during shipping.
3. Connect the power supply cord (or plug) to the outlet. Don't double up with other
appliances on the same outlet.
4. Prior to use, let the appliance run for 2-3 hours. Check the flow of cold air in the
freezer compartment to ensure proper cooling has taken place. Your appliance is
now ready for use.
7
Operation
Starting
When your refrigerator is first installed, allow it to stabilize at normal operating
temperatures for 2-3 hours prior to filling it with fresh or frozen foods.
If operation is interrupted, wait 5 minutes before restarting.
Adjusting the temperatures and functions
Optional
Function display board
EXPRESS FRZ
FREEZER
REFRIGERATOR
Express freezer.
Type-1
Lock button.
Temperature adjustment button
for freezer compartment.
EXPRESS FRZ
FREEZER
Express freezer.
Type-2
Temperature adjustment button
for freezer compartment.
8
LOCK
Temperature adjustment button
for refrigerator compartment.
REFRIGERATOR
LOCK
Lock button.
Temperature adjustment button
for refrigerator compartment.
Operation
You can adjust temperature of and freezer room and refrigerator room.
How to adjust the
temperature in
the freezer
compartment
Middle(-190C)➔ Middle strong(-220C)➔ Strong(-230C)➔ Weak(-150C)➔ Middle weak(-170C)
How to adjust the
temperature in
the refrigerator
compartment
Middle(30C)➔ Middle strong(20C)➔ Strong(00C)➔ Weak(60C)➔ Middle weak(40C)
❇ Whenever pressing button, setting is repeated in the order of (Middle) ➔
(Middle Strong) ➔ (Strong) ➔ (Weak) ➔ (Middle Weak).
The actual inner temperature varies depending on the food status, as the
indicated setting temperature is a target temperature, not actual temperature
within refrigerator.
Refrigeration function is weak in the initial time. Please adjust temperature as
above after using refrigerator for minimum 2~3 days.
Express freezer
Please select this function for prompt
freezer.
"On" is repeated whenever pressing
button.
The arrow mark graphic remains at the On
status when selecting Special
Refrigeration "On".
Super freezer function automatically turns
off if a fixed time passes.
Lock
This button stops operation of
different button.
Locking or Release is repeated whenever
pressing the
.
Pressing the other button when selecting
‘LOCK’, the button does not operate.
9
Operation
Door open warning
3 times of warning sounds at the interval of 30 seconds if a minute passes with the
door of refrigerator and the hombar door opened or completely closed.
Please contact with the local service center if warning continue to sound even after
closing the door.
The other
functions
Diagnosis (failure detection) function
Diagnosis function automatically detects failure when failure is found in product during
the use of refrigerator.
If failure occurs at product, it does not operate though pressing any button and normal
indication is not done. In this case, do not turn power off but immediately contact with
the local service center. A lot of time are need for service engineer to detect the failed
part if turning it off.
An alarm will sound 3 times when the refrigerator door is left open for more than 1
minute. This alarm will be rung at an intervals of 30 sec. and stop at the close of the
door. If the alarm sound does not stop even after the freezer and refrigerator
compartment doors are closed, contact the service center.
Door open alarm
Self-diagnosis function operates when a problem occurs in the unit. When an error
occurs in the unit. Immediately contact the service center without turning the
power OFF. If the power is OFF, it will take the engineer longer to find out where
the fault occurs.
The pressing of any function buttons will not alter the temperature setting when a
fault occurs.
Self-diagnosis
(fault detection)
function
Ice Making
When making Ice
Fill water in ice making box of the ice
making corner.
If water is fully filled the ice will not be
separated well and water can be
dropped to make ice lumped.
Ice Making Box
Ice will be dropped into the ice storage
bin by rotating ice separation handle of
ice making compartment.
NOTE
•
10
Rotating the ice separation handle before ice is fully frozen may cause the
remaining water drop into the ice storage bin to lump the ice together.
Operation
Refreshment center (Applicable to some models only)
How to use
Open the refreshment center door.
You can access the refreshment center
without opening refrigerator door and thus
saving electricity.
Inner lamp is lit in refrigerator compartment
when the refreshment center door opens.
Thus it is easy to identify the contents.
Use the
refreshment
center door as a
stand
Never use the refreshment center door as a
chopping board and take care not to damage
it with sharp tools.
Never rest your arms or severely press on it.
Never take out
the inner
refreshment
center cover
Never place
heavy items on
the refreshment
center door or
allow children to
hang it on.
11
The refreshment center can not function
normally without the cover.
Not only can the refreshment center door
may be damaged, but also children may be
hurt.
Operation
Shelf (Applicable to some models only)
Slide-Under
Shelf
You can store taller items such as a gallon container or bottles by simply pushing in
front half of shelf underneath back half of shelf. Pull toward you to return to a full shelf.
Wine holder (Applicable to some models only)
Bottles can be stored laterally with this wine
corner.
This can be attached to any shelf.
Wine holder
adjustment
(Type 1)
2
In case of inserting the wine holder :
Pull the wine holder downward as in after
inserting it into the side anchoring part of the
shelf as in by catching it upward as in .
In case of separating the wine holder :
Pull the wine holder inward as in ➃ after
holding it upward as in ➂ by catching it.
(Type 2)
Bottles can be stored laterally with this wine
rack.
12
1
3
4
Operation
Egg box (Applicable to some models only)
You can move the egg box to wherever you want.
[Type-1]
[Type-2]
NOTE
•
•
Never use the egg box as an ice storage bin. It can be broken.
Never store the egg box in the freezer compartment or fresh compartment.
Humidity control in the vegetable compartment
The humidity can be controlled by adjusting the humidity control switch to the
left/right when storing vegetabes or fruits.
High humidity
HIGH
HUMIDITY CONTROL
LOW
W
LO
H
HIG
W
LO
Low humidity
HIGH
H
HIG
HUMIDITY CONTROL
LOW
Convert into a vegetable or meat compartment
The bottom drawer in the refrigerator can be converted into a vegetable or meat
compartment
The meat compartment maintains the temperature at a lower point than the
refrigerator compartment so that meat or fish can be stored fresh longer.
NOTE
•
13
Vegetables or fruits are frozen if the conversion switch is set to meats
compartment. So, be sure to check it before storing foods.
Operation
Deodorizer (Applicable to some models only)
This system efficiently absorbs strong odors
by using the optical catalyst. This system
does hot have any affect on stored food.
How to use the
deodorizing
system
Since it is installed already installed onto the cool air intake duct from the from
the refrigerator compartment, you need no separate installation.
Please use closed containers to store food with pungent odors.
Otherwise, this oder can be absorbed by other food in the compartment.
14
Suggestion on food storage
Location of foods
(Refer to identification of parts)
Wine holder
Store wine.
Snack drawer
Store small foods such as bread, snacks, etc..
Freezer
compartment
shelf
Store various frozen foods such as meat, fish,
ice cream, frozen snacks, etc..
Freezer
compartment
door rack
Freezer
compartment
drawer
Store small packed frozen food.
Temperature is likely to increase as door
opens. So, do not store long-term food
such ice cream, etc..
Store meat, fish, chicken, etc.. after
wrapping them with thin foil.
Store dry.
Store milk products such as butter, cheese,
etc..
Milk product
corner
Egg box
Place this egg box in the proper location.
Refreshment
center
Store foods of frequent use such as beverage,
etc..
Refrigerator
compartment
shelf
Store side dishes or other foods at a proper
distance.
Refrigerator
compartment
door rack
Store small packed food or beverages such
as milk, juice, beer, etc..
Vegetable drawer
Store vegetables or fruits.
Vegetable
drawer
/meat drawer
conversion corner
Store vegetable, fruits, meat to thaw, raw
fish, etc.. setting the conversion switch as
necessary.
Be sure to check the conversion switch
setting before storing foods.
15
Suggestion on food storage
Storing foods
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an
important factor in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, and
melons.
Allow hot food to cool prior to storing, placing hot food in the refrigerator could spoil
other food, and lead to higher electric bills.
When storing the food, cover it with vinyl wrap or store in a container with a lid. This
prevents moisture from evaporating, and helps food to keep its taste and nutrients.
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator
temperatures even.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator,
and cause temperatures to rise.
Never keep too many foods in door rack because they may be interrupted by inner
racks so that the door cannot be fully closed.
Freezer
compartment
Refrigerator
compartment
Do not store bottles in the freezer compartment - they may break when frozen.
Do not refreeze food that has been thawed. This causes loss of taste and nutrient.
When storing frozen food like ice cream for a long period, place it on the freezer
shelf, not in the door rack.
Do not touch the cold foods or containers- especially made of metallic -, with wet
hands and place glass products in the freezer compartment.
- That’s why you may have chilblains and they may be broken when their inner matters
are frozen, causing personal injury.
Avoid placing moist food upmost refrigerator shelves, it could freeze upon direct
contact with chilled air.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and
wiped, and packed food should be wiped, to prevent adjacent food from spoiling.
When storing eggs in their storage rack or box, ensure that they are fresh, and always
store them in a up-right position, which keeps them fresh longer.
NOTE
•
16
If you keep the refrigerator in a hot and humid place, frequent openning of the door
or storing a lot of vegetables in it may cause dew to form which has no effect on its
performance. Remove the dew with dust cloth free from care.
Care and maintenance
How to dismantle parts
NOTE
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Freezer
compartment
lamp
Separate the lamp by pulling it out (➂) while
slightly striking (➀) and rotating (➁) the lamp cover.
Turn the bulb counterclockwise. Max. 40 W bulb for
refrigerator is used and can be purchased at a
service center.
Freezer
compartment
shelf
To remove a shelf, lift the left part of the shelf a
bit, push it to the direction , lift the right part to
the diretion , and take it out.
1
2
3
1
2
1
Lift the door rack to direction holding both
sides and pull it out to direction.
Door rack and
support
Lamp in
refrigerator
compartment
2
To remove the lamp cover, press the protrusion
under the lamp cover to the front and then pull
the lamp cover out.
Turn the bulb counterclockwise. Max. 40 W
bulb for refrigerator is used and can be
purchased at a service center.
1
Refreshment
center
2
Separate the bin () to upward.
Separate the upper rack of the refreshment
center and then pull out the refreshment
center cover ().
The refreshment center can be removed
by pulling it upwards.
NOTE
•
Vegetable
compartment
cover
17
Be sure to remove parts from the refrigerator door when removing the vegetable
compartment and snack corner.
To remove the vegetable compartment cover,
pull out the vegetable compartment a bit to
the front , lift the front part of the vegetable
compartment cover as shown by , and take
it out.
2
1
Care and maintenance
General information
Vacation time
During average length vacations, you will probably find it best to leave the refrigerator
in operation. Place freezable items in freezer for longer life.
When you plan not to operate, remove all food, disconnect the power cord, clean the
interior thoroughly, and leave each door OPEN to prevent odor formation.
Power failure
Most power failures that are corrected in an hour or two will not affect your
refrigerator temperatures.
However, you should minimize the number of door openings while the power is off.
If you move
Remove or securely fasten down all loose items inside the refrigerator.
To avoid damaging the height adjusting screws, turn them all the way into the base.
Anti
condensation
pipe
The outside wall of the refrigerator cabinet may sometimes get warm, especially just
after installation.
Don’t be alarmed. This is due to the anti-condensation pipe, which pumps hot
refrigerator to prevent “sweating” on the outer cabinet wall.
Cleaning
It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled
food should be wiped up immediately, since it may acidify and stain plastic surfaces if
allowed to settle.
Use a lukewarm solution of mild soap or detergent to clean the durable finish of your
refrigerator.
Wipe with a clean damp cloth and then dry.
Exterior
Interior
Regular cleaning is recommended. Wash all compartments a baking soda solution or a
mild detergent and warm water. Rinse and dry.
After cleaning
Please verify that the power cord is not damaged, power plug is not overheated, or
power plug is well inserted into the power consent.
Warning
Always remove power cord from the wall outlet prior to cleaning in the vicinity of
electrical parts (lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or cloth to prevent water or liquid from
getting into any electrical part and causing an electric shock.
Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline
solutions, flammable or toxic cleaning liquids on any surface.
Do not touch frozen surfaces with wet or damp hands, because damp object will stick
or adhere to extremely cold surfaces.
18
Care and maintenance
Occurrence
Possible cause
Solution
Temperatures are
too cold
Temperature in the
freezer is too cold
and the refrigerator
temperature is
satisfactory.
Freezer control is set too cold
Set the freezer control to a warmer
setting until the freezer temperature is
satisfactory.
Temperature in the
refrigerator is too
cold and the freezer
temperature
is satisfactory.
Refrigerator control is set too cold.
Set the refrigerator control to a
warmer setting
Food stored in
drawers freezes.
Refrigerator control is set too cold.
See above solution.
Meat should be stored at temperature
just below the freezing point of water (32 ˚ F,
0 ˚ C) for maximum fresh storage time.
It is normal for ice crystals to form due
to the moisture content of meat.
Freezer control is set too warm.
Set the freezer control to a colder
setting until the freezer temperature is
satisfactory.
Refrigerator control is set too warm.
Refrigerator control has some effect on
freezer temperature.
Set the freezer control to a colder
setting until the freezer temperature is
satisfactory.
Doors are opened too frequently or too
long.
Warm air enters the refrigerator/ freezer
whenever the door is opened.
Open the door less often.
Door is open slightly.
Close the door completely.
Large amounts of warm of hot food
may have been stored recently.
Wait until the refrigerator or freezer
has had a chance to reach its selected
temperature.
Refrigerator has recently been
disconnected for a period of time.
A refrigerator requires some hours to
cool down completely.
Refrigerator control is set too warm.
Set the refrigerator control to a colder
setting.
Meat stored in
fresh meat
drawer freezes.
Temperatures
are too warm
Temperatures in
the freezer is too
warm.
Temperatures in
the refrigerato or
freezer is too
warm.
Temperature in the
refrigerator
is too warm and
the freezer
temperature is
satisfactory.
20
Care and maintenance
Possible cause
Occurrence
Solution
Sound and noise
Louder sound
levels when
refrigerator is on.
Today’s refrigerators have increased
storage capacity and maintain more
even temperatures.
It is normal for sound levels to be higher.
Louder sound
levels when
compressor
comes on.
Refrigerator operates at higher pressures
during the start of the ON cycle.
This is normal. Sound will level off as
refrigerator continues to run.
Vibrating or
rattling noise.
Floor is uneven or weak.
Refrigerator rocks on the floor when it is
moved slightly.
Be sure floor is level and solid and can
adequately support refrigerator.
Items placed on the top of refrigerator
are vibrating.
Remove items.
Dishes are vibrating on the shelves in
the refrigerator.
It is normal for dishes to vibrate slightly.
Move dishes slightly.
Make sure refrigerator is level and solidly
set on floor.
Refrigerator is touching wall or cabinets.
Relieve or move refrigerator
Weather is hot and humid which
increases rate of frost buildup and
internal sweating.
This is normal.
Door is slightly open.
See problem section opening/closing of
doors.
Door is opened too often or too long.
Open the door less often.
Weather is humid.
This is normal in humid weather.
When humidity is lower, the moisture
should disappear.
Door is slightly open, causing cold air
from the inside the refrigerator to meet
warm air from the outside.
This time, close the door completely.
Water/Moisture
/Ice inside
refrigerator
Moisture collects
on inside of
refrigerator walls.
Water/Moisture
/Ice outside
refrigerator
Moisture forms
on outside of
refrigerator
or between doors.
21
Care and maintenance
Occurrence
Possible cause
Solution
Odors in refrigerator
Interior needs to be cleaned.
Clean interior with sponge,warm water
and baking soda.
Food with strong odor is in refrigerator.
Cover food completely.
Some containers and wrapping paper
produce odors.
Use a different container or brand of
wrapping paper.
Door(s) will not
close.
Food package is keeping door open.
Move packages that keep door from
closing.
Door(s) will not
close.
(Continued)
Door was closed too hard, causing other
door to open slightly.
Close both doors gently.
Refrigerator is not level. It rocks on the
floor when it is moved slightly.
Adjust the height adjusting screw.
Floor is uneven or weak.
Refrigerator rocks on the floor when it
is moved slightly.
Be sure floor is level and can adequately
support refrigerator.
Contact carpenter to correct sagging or
sloping floor.
Refrigerator is touching wall or cabinets.
Relieve or move refrigerator..
Food is touching shelf on top of drawer
Keep less food in drawer.
Track that drawer slides on is dirty.
Clean drawer and track.
Opening/Closing of
doors/Drawers
Drawers are
difficult to move.
Other
Please thoroughly read this manual.
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a
product it means the product is covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop
where you purchased the product.
22
Download PDF

advertising