LG | 28LY330C | LG 28LY330C Owner’s Manual

OWNER’S MANUAL
*
LED TV
*LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating
your set and retain it for future reference.
LY31**
LY33**
LY34**
LY54**
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
3
LICENSES
47
SPECIFICATIONS
3
OPEN SOURCE SOFTWARE
NOTICE
56
IR CODES
4
ASSEMBLING AND PREPARING
57
EXTERNAL CONTROL DEVICE
SETUP
4
7
8
9
10
11
11
14
17
19
Unpacking
Separate Purchase
Parts and Button
- Using the Joystick button
Lifting and Moving the TV
Setting up the TV
- Attaching the stand
Mounting on a table
Mounting on a wall
How to use Dual Lock™
57
57
RS-232C Setup
Type of Connector:
D-Sub 9-Pin Male
RS-232C Configurations
Communication Parameters
Command Reference List
Transmission / Receiving Protocol
21
MAKING CONNECTIONS
22
Antenna Connection
22
Satellite Dish Connection
23Adapter Connection
23
Euro Scart Connection
24
Network Setup
24
- Wired network connection
24
- Network setting
26
Other Connections
40
REMOTE CONTROL
45
MAINTENANCE
45
45
45
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
46
TROUBLESHOOTING
58
59
59
60
WARNING
yy If you ignore the warning message, you
may be seriously injured or there is a
possibility of accident or death.
CAUTION
yy If you ignore the caution message, you
may be slightly injured or the product
may be damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx
com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
ENGLISH
ENG
LICENSES
4
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
5
ENGLISH
ENG
Remote control,
batteries (AAA)
(See p.40, 41, 42, 43, 44)
Owner’s manual
Cable Holder
(Depending on model)
(See p.20)
Power cord
(Depending on model)
Stand Screws
4EA, M4 x L14
(Only 42/49LY31**,
39/42/47/55/60LY330*,
39/42/47/55/60LY340*,
39/42/47/55/60LY540*,
42/47/55LY541*,
42/47/55LY341*,
42/47/55LY331*)
(See p.11, 13)
Stand Screws
4EA, M4 x L20
(Only 32LY31**, 32LY330*,
32LY340*, 32LY540*,
42/47/55LY541*,
42/47/55LY341*,
42/47/55LY331*)
6EA, M4 x L20
(Only 32/39LY541*,
32/39LY341*, 32/39LY331*)
(See p.11, 12, 13)
Cable Managements
2EA
(Only 32/42/49LY31**,
32/39/42/47/55/60LY330*,
32/39/42/47/55/60LY340*,
32/39/42/47/55/60LY540*)
(See p.20)
Wall Mount Spacers
2EA
(Only 42LY31**, 42LY33**,
42LY34**, 42LY54**)
(See p.18)
Stand Bases
(Only 32/42/49LY31**,
32/39/42/47/55/60LY330*,
32/39/42/47/55/60LY340*,
32/39/42/47/55/60LY540*)
(See p.11)
6
ASSEMBLING AND PREPARING
ENGLISH
ENG
AC-DC Adaptor
(Only 28LY31**,
22/28LY33**, 22/28LY34**,
22/28LY54**)
(Depending on model)
(See p.23)
Stand Base
(Only 28LY31**, 22/28LY33**,
22/28LY34**, 22/28LY54**)
(See p.11)
Dual Lock™
(Only LY540H, LY541H,
LY540M)
(See p.19)
Stand Base/Stand Body
(Only LY541*, LY331*,
LY341*)
(See p.12, 13)
Power Cord Holder/Screw
1EA
(Only 39/42/47/55LY541*,
39/42/47/55LY341*,
39/42/47/55LY331*)
(See p.20)
Torx Plus Star-Head
Screws
2EA
(Only LY541*, LY331*,
LY341*)
(See p.12, 13)
Rubbers
2EA
(Only LY541*, LY331*,
LY341*)
(See p.14)
Washers for Stand Fixing
2EA
(Depending on model)
(See p.16)
Nuts for Stand Fixing
2EA
(Depending on model)
(See p.16)
Screws for Stand Fixing
2EA
(Depending on model)
(See p.16)
ASSEMBLING AND PREPARING
7
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items.
These devices only work with certain models.
The model name or design may be changed depending on the upgrade of product functions,
manufacturer’s circumstances or policies.
LG Audio Device
LED Clock
LEC-003
(Only 32/39/42/47/55LY540H,
32/39/42/47/55LY541H)
ENGLISH
ENG
Separate Purchase
8
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and Button
A type : 32/42/49LY31**, 32/39/42/47/55/60LY330*,
32/39/42/47/55/60LY340*, 32/39/42/47/55/60LY540*
B type : 28LY31**, 22/28LY33**,
22/28LY34**, 22/28LY54**
Screen
Screen
Speakers
Speakers
Remote control
and intelligent sensors1
Power Indicator
Remote control
and intelligent sensors1
Power Indicator
Joystick Button2
Joystick Button2
C type : 32/39/42/47/55LY331*, 32/39/42/47/55LY541*,
32/39/42/47/55LY341*
Screen
Speakers
Remote control and
intelligent sensors1
Power Indicator
Joystick button2
1 Intelligent sensor - Adjusts the image quality and brightness based on the surrounding environment.
2 Joystick Button - This button is located below the TV screen.
NOTE
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
ASSEMBLING AND PREPARING
9
You can simply operate the TV functions, pressing or moving the joystick button up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
Volume
Control
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.
NOTE
yy When your finger over the joystick button and push it to the up, down, left or right, be careful
not to press the joystick button. If you press the joystick button first, you may not be able to
adjust the volume level and saved programmes.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items ( ,
,
TV off
Settings
Close
,
) moving the joystick button up, down, left or right.
Turns the power off.
Accesses the main menu.
Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ENGLISH
ENG
Using the Joystick button
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and Moving the TV
When moving or lifting the TV, read the following
to prevent the TV from being scratched or
damaged and for safe transportation regardless
of its type and size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
CAUTION
yy When handling the TV, be careful not to
damage the protruding joystick button.
(Depending on model)
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
ASSEMBLING AND PREPARING
(Only 28LY31**, 22/28LY33**, 22/28LY34**,
22/28LY54**)
Image shown may differ from your TV.
Attaching the stand
1
(Only 32/42/49LY31**, 32/39/42/47/55/60LY330*,
32/39/42/47/55/60LY340*, 32/39/42/47/55/60LY540*)
1
1
2
A Stand Base
Stand Base
B Stand Base
2
2
M4 x L14
(Only 42/49LY31**,
39/42/47/55/60LY330*,
39/42/47/55/60LY340*,
39/42/47/55/60LY540*)
4EA M4 x L20
(Only 32LY31**,
32LY330*, 32LY340*,
32LY540*)
ENGLISH
ENG
Setting up the TV
11
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
(Only 32/39LY541*, 32/39LY331*, 32/39LY341*)
3
1
M4 x L20
2EA
4 EA
M4 x L20
or
Stand Body
Torx Plus Star-Head Screws
2EA
Tighten the two Torx head screws
(supplied with TV) with a Torx Bit Driver
(not supplied with TV).
Stand Base
2
ASSEMBLING AND PREPARING
1
4 EA
M4 x L20
Stand Body
3
M4 x L14
4EA
or
M4 x L14
2EA
Torx Plus Star-Head Screws
2EA
Stand Base
2
Tighten the two of these four screws
and the two Torx screws (supplied with
TV) to secure the TV. Tighten the two
Torx screws with a Torx Bit Driver (not
supplied with TV).
ENGLISH
ENG
(Only 42/47/55LY541*, 42/47/55LY331*,
42/47/55LY341*)
13
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a table
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
yy Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.) Do not use too
much force and over tighten the screws;
otherwise screw may be damaged and
not tighten correctly.
1 Lift and tilt the TV into its upright position on
a table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
10 cm
10 cm
m
10 c
10 cm
NOTE
yy Remove the stand before installing the
TV on a wall mount by performing the
stand attachment in reverse.
yy The Rubber will protect the opening
from accumulating dust and dirt. When
installing the wall mounting bracket,
use the Rubber. (Only LY541*, LY331*,
LY341*)
Rubber
2EA
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
ASSEMBLING AND PREPARING
Attaching the TV to a desk
(Only LY541*, LY331*, LY341*)
(Depending on model)
Swivel 20 degrees to the left or right and adjust
the angle of the TV to suit your view.
The TV should be attached to a desk so
it cannot be pulled in a forward/backward
direction, potentially causing injury or damaging
the product.
20˚
20˚
A type )
CAUTION
yy When adjusting the angle of the product,
watch out for your fingers.
»» Personal injury may occur if hands
or fingers are pinched. If the product
is tilted too much, it may fall, causing
damage or injury.
4-Screws
(Not supplied with TV)
Stand
Desk
NOTE
yy Screw : M5 x L (*L: Table depth + 8~10
mm)
ex) Table depth: 15 mm, Screw: M5 x 25
ENGLISH
ENG
Adjusting the angle of the TV to suit view
15
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
B type )
(This feature is not available for all models.)
2-Screws for Stand Fixing,
2-Washers for Stand Fixing,
2-Nuts for Stand Fixing
(Supplied with TV)
Stand
Desk
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
yy Make sure that children do not climb on
or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
ASSEMBLING AND PREPARING
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
We recommend the use of LG’s wall mount
bracket.
When you do not use LG’s wall mount bracket,
please use a wall mount bracket where the
device is adequately secured to the wall with
enough space to allow connectivity to external
devices.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
22LY33**
22LY34**
22LY54**
VESA (A x B)
28LY31**
28LY33**
28LY34**
28LY54**
75 x 75
100 x 100
M4 X L10
M4 X L10
Number of
screws
4
4
Wall mount
bracket
LSW140B
LSW140B
32LY31**
32/39LY33**
32/39LY34**
32/39LY54**
42/49LY31**
42/47/55LY33**
42/47/55LY34**
42/47/55LY54**
200 x 200
400 x 400
M6
M6
Number of
screws
4
4
Wall mount
bracket
LSW240B
MSW240
LSW440B
MSW240
Standard
screw
Model
VESA (A x B)
Standard
screw
Model
VESA (A x B)
60LY33**
60LY34**
60LY54**
400 x 400
Standard
screw
M6
Number of
screws
4
Wall mount
bracket
LSW440B
A
B
ENGLISH
ENG
Mounting on a wall
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
CAUTION
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the warranty.
yy Screw length from outer surface of back
cover should be under 8 mm.
(Only 28LY31**, 22/28LY33**,
22/28LY34**, 22/28LY54**)
yy Use the screws that are listed on the
VESA standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
yy The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
yy For more information, refer to the manual
supplied with the wall mount.
yy When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
(Only 42LY31**, 42LY33**, 42LY34**,
42LY54**)
Wall Mount
Spacers
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8 mm
ASSEMBLING AND PREPARING
(Only LY540H, LY541H, LY540M)
Fix the set-top box to the TV and use it when
you want to.
1 After removing the protection paper from the
Dual Lock, stick it to the TV and the set-top
box as shown.
Dual Lock™
2 Attach the set-top box to the TV by pressing
the Velcro strips together.
NOTE
lease make sure no foreign substances
yy P
exist on the surface of the product, and
then firmly attach the Dual Lock™.
yy Before attaching the set-top box to the
TV set, let the attached Dual Lock™ dry
for at least three days.
ENGLISH
ENG
How to use Dual Lock™
19
20
ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
(Only 32LY541*, 32LY331*, 32LY341*)
Image shown may differ from your TV.
1 Gather and bind the cables with the cable
holder.
(Only 22/28LY33**, 22/28LY34**, 22/28LY54**,
28LY31**)
1 Gather and bind the cables with the cable
holder.
Cable Holder
(Only 39/42/47/55LY541*, 39/42/47/55LY331*,
39/42/47/55LY341*)
Cable Holder
(Only 32/39/42/47/55/60LY540*,
32/39/42/47/55/60LY330*,
32/39/42/47/55/60LY340*,
32/39/42/47/55/60LY345*, 32/42/49LY31**)
1 Gather and bind the cables with the cable
holder.
2 Fix the Cable Management firmly to the TV.
1 Install the power cord holder and power
cord. It will help prevent the power cable
from being removed by accident.
2 Gather and bind the cables with the cable
holder.
Power Cord Holder/
Screw
Cable Holder
Cable Holder
Cable Management
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holder may break,
and injuries and damage to the TV may
occur.
MAKING CONNECTIONS
yy Image shown may differ from your TV.
yy Any separate cable is not provided.
This section on MAKING CONNECTIONS
mainly uses diagrams for the 32LY330* models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
NOTE
yy The external device connection may
differ from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect
the TV signal input cable to the TV
through a DVD recorder or VCR. For
more information on recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yy In PC mode, some resolution settings
may not work properly depending on the
graphics card.
yy Only a USB storage device is
recognizable.
ENGLISH
ENG
MAKING CONNECTIONS
21
22
MAKING CONNECTIONS
ENGLISH
ENG
Antenna Connection
Satellite Dish Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
(Only satellite models)
Wall Antenna
Socket
Connect the TV to a satellite dish to a satellite
socket with a satellite RF cable (75 Ω).
ANTENNA /
CABLE IN
LNB
Satellite
or
(*Not Provided)
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
Satellite
Dish
(*Not Provided)
13/18V
700mA Max
LNB
Satellite IN
MAKING CONNECTIONS
Euro Scart Connection
(Only 28LY31**, 22/28LY33**, 22/28LY34**,
22/28LY54**)
Transmits the video and audio signals from
an external device to the TV set. Connect the
external device and the TV set with the euro
scart cable as shown.
(Depending on model)
Power Cord
DC-IN
(19V
)
AV
(RGB)
AC-DC Adapter
CAUTION
(*Not Provided)
yy Please be sure to connect the TV to the
AC-DC power adapter before connecting
the TV’s power plug to a wall power
outlet.
AUDIO / VIDEO
Output
Type
Current
input mode
Digital TV
AV1
(TV Out1)
Digital TV
Analogue TV, AV
Component
Analogue TV
HDMI
1 TV Out : Outputs Analogue TV or Digital TV
signals.
NOTE
yy Any Euro scart cable used must be signal
shielded.
ENGLISH
ENG
Adapter Connection
23
24
MAKING CONNECTIONS
ENGLISH
ENG
Network Setup
Network setting
Wired network connection
(Depending on model)
Image shown may differ from your TV.
This TV can be connected to a Pro:Centric
server via the LAN port. After making the physical connection, the TV needs to be set up for
network communication.
Connect the LAN port of the Modem or Router
from Pro:Centric server to the LAN port on the
TV.
1 Press the SETTINGS button to access the
main menu.
2 Select the NETWORK → Network Setting menu.
NETWORK
(Only LY540H, LY541H, LY540M)
Move
OK
Network Setting
Network Status
LAN
or
(MHEG & SERVICE)
Broadband Modem
3 Select the Start Connection.
Pro:CentricServer
Router
Network Setting
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Broadband Modem
Start Connection
Pro:CentricServer
Previous
CAUTION
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
methods, please follow the specifications
of your telecommunication carrier or
internet service provider.
Next
MAKING CONNECTIONS
Network Setting
Network connecting...
Cancel
Previous
5 The connected network is displayed.
Select the Complete to confirm the network connection.
Network Setting
Wired network is connected.
For detailed settings, select [Set Expert].
Set Expert
Previous
Complete
ENGLISH
ENG
4 The device automatically tries to connect to
the network.
25
26
MAKING CONNECTIONS
ENGLISH
ENG
Other Connections
Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Some separate cable is not provided.
(Only 32/39/42/47/55LY540H, 32/39/42/47/55LY541H)
AUDIO IN
(COMPONENT/DVI)
IN
1
EXTERNAL
SPEAKER OUT
AV
(RGB)
OPTICAL
DIGITAL
AUDIO OUT
VOLUME
CONTROL
AUDIO IN
(COMPONENT/DVI)
LNB
Satellite
COMPONENT
IN
RS-232C IN
(CONTROL & SERVICE)
ANTENNA/
CABLE IN
CLOCK
(Only
Satellite Models)
+
UP
DOWN
Control port for
Speaker out
HDMI
DVI OUT
AUDIO OUT
-
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
GND
RIGHT
LEFT
GND
LED Clock
AUDIO IN
(COMPONENT/DVI)
COMPONENT
IN
RED
BLUE
RED
GREEN
BLUE
RED
L
VIDEO
RED
BLUE
Digital Audio Systerm
WHITE
GREEN GREEN
OPTICAL AUDIO IN
R
AUDIO
Blu-Ray / HD Cable Box / DVD
MAKING CONNECTIONS
ENGLISH
ENG
(Only 32/39/42/47/55LY540H, 32/39/42/47/55LY541H)
PCMCIA Card
IN2 (MHL)
USB IN
USB
AUDIO IN
(COMPONENT/DVI)
MHL passive cable
H/P OUT
Mobile Phone
Headphone
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
27
28
MAKING CONNECTIONS
ENGLISH
ENG
(Only 32/39/42/47/55/60LY540S)
AUDIO IN
(COMPONENT/RGB/DVI)
IN
1
(MHEG & SERVICE)
EXTERNAL
SPEAKER OUT
OPTICAL
DIGITAL
AUDIO OUT
AV
(RGB)
AUDIO IN
(COMPONENT/RGB/DVI)
(Only
Satellite Models)
LNB
Satellite
COMPONENT
IN
ANTENNA/
CABLE IN
RS-232C IN RGB IN (PC)
(CONTROL & SERVICE)
HDMI
DVI OUT
AUDIO OUT
AUDIO IN
(COMPONENT/RGB/DVI)
GND
RIGHT
LEFT
GND
Blu-Ray / HD STB / HD Cable Box
/ DVD / PC
AUDIO IN
(COMPONENT/RGB/DVI)
COMPONENT
IN
AUDIO OUT RGB OUT (PC)
GREEN GREEN
BLUE
RED
BLUE
RED
GREEN
BLUE
RED
OPTICAL AUDIO IN
PC
RED
WHITE
L
VIDEO
R
AUDIO
Blu-Ray / HD Cable Box / DVD
Digital Audio
Systerm
MAKING CONNECTIONS
ENGLISH
ENG
(Only 32/39/42/47/55/60LY540S)
USB
IN2 (MHL)
USB IN 1
USB IN 2
PCMCIA Card
AUDIO IN
(COMPONENT/DVI)
H/P OUT
MHL passive cable
Headphone
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
29
Mobile Phone
30
MAKING CONNECTIONS
ENGLISH
ENG
(Only 32/39/42/47/55/60LY34**)
(Only 32LY340C)
AUDIO IN
(COMPONENT/RGB/DVI)
IN
1
(MHEG & SERVICE)
EXTERNAL
SPEAKER OUT
AV
(RGB)
OPTICAL
DIGITAL
AUDIO OUT
H/P OUT
AUDIO IN
(COMPONENT/RGB/DVI)
LNB
Satellite
COMPONENT
IN
ANTENNA/
CABLE IN
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
(Only
Satellite Models)
Headphone
GND
RIGHT
RED
BLUE
RED
GREEN
BLUE
RED
RED
BLUE
Digital Audio Systerm
WHITE
GREEN GREEN
OPTICAL AUDIO IN
L
AUDIO OUT
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
AUDIO IN
(COMPONENT/RGB/DVI)
VIDEO
DVI OUT
AUDIO IN
(COMPONENT/RGB/DVI)
LEFT
GND
COMPONENT
IN
HDMI
R
AUDIO
Blu-Ray / HD Cable Box / DVD
AUDIO OUT RGB OUT (PC)
PC
MAKING CONNECTIONS
31
ENGLISH
ENG
(Only 32/39/42/47/55/60LY33**)
AUDIO IN
(COMPONENT/RGB/DVI)
IN
1
OPTICAL
DIGITAL
AUDIO OUT
EXTERNAL
SPEAKER OUT
AV
(RGB)
H/P OUT
AUDIO IN
(COMPONENT/RGB/DVI)
ANTENNA/
CABLE IN
COMPONENT
IN
RS-232C IN
RGB IN (PC)
(CONTROL & SERVICE)
HDMI
Headphone
GND
RIGHT
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
AUDIO IN
(COMPONENT/RGB/DVI)
RED
BLUE
RED
GREEN
BLUE
RED
RED
BLUE
Digital Audio Systerm
WHITE
GREEN GREEN
OPTICAL AUDIO IN
L
VIDEO
AUDIO OUT
AUDIO IN
(COMPONENT/RGB/DVI)
LEFT
GND
COMPONENT
IN
DVI OUT
R
AUDIO
Blu-Ray / HD Cable Box / DVD
AUDIO OUT RGB OUT (PC)
PC
32
MAKING CONNECTIONS
PCMCIA Card
USB IN
USB
IN2 (MHL)
ENGLISH
ENG
(Only 32/39/42/47/55/60LY34**, 32/39/42/47/55/60LY33**)
AUDIO IN
(COMPONENT/DVI)
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
MHL passive cable
Mobile Phone
MAKING CONNECTIONS
33
ENGLISH
ENG
(Only 32/42/49LY31**)
IN
(Only
Satellite Models)
13/18V
700mA Max
LNB
Satellite IN
OPTICAL
DIGITAL
AUDIO OUT
ANTENNA /
CABLE IN
HDMI
YELLOW
GREEN
Blu-Ray / DVD / HD STB
/ HD Cable Box / PC
BLUE
RED
WHITE
RED
WHITE
WHITE
RED
RED
GREEN
BLUE
RED
WHITE
RED
YELLOW
WHITE
RED
OPTICAL AUDIO IN
(MONO)
Digital Audio
Systerm
VIDEO
Blu-Ray / HD Cable Box
/ DVD / VCR
AUDIO
VIDEO
Blu-Ray / HD Cable Box
/ DVD
AUDIO OUT
DVI OUT
Blu-Ray / DVD / HD STB
/ HD Cable Box / PC
34
MAKING CONNECTIONS
86%,1
PCMCIA Card
USB
IN
0+/
ENGLISH
ENG
(Only 32/42/49LY31**)
MHL passive cable
WHITE
RED
HDMI
Blu-Ray / HD STB / HD Cable
Box / DVD / PC
AUDIO OUT
DVI OUT
Blu-Ray / HD STB / HD Cable Box /
DVD / PC
Mobile Phone
MAKING CONNECTIONS
35
ENGLISH
ENG
(Only 22/28LY33**, 22/28LY34**)
(Only
Satellite Models)
EXTERNAL
SPEAKER
OUT
AV
(RGB)
OPTICAL
DIGITAL
AUDIO OUT
13/18V
700mA Max
RGB IN (PC)
LNB
Satellite IN
IN 1
(Only
Support
Network
Model)
DC-IN
(19V
COMPONENT
IN
AUDIO IN
(COMPONENT
/RGB/DVI)
)
RS-232C IN
(CONTROL & SERVICE)
ANTENNA
/ CABLE IN
GND
RIGHT
LEFT
GND
COMPONENT
IN
BLUE
RED
BLUE
RED
GREEN GREEN
AUDIO IN
(COMPONENT
/RGB/DVI)
L
VIDEO
RED
WHITE
RED
BLUE
GREEN
OPTICAL AUDIO IN
AUDIO IN
(COMPONENT
/RGB/DVI)
HDMI
DVI OUT
AUDIO OUT
R
AUDIO
Blu-Ray / HD STB / HD Cable Box
/ DVD / PC
Digital Audio
Systerm
AUDIO OUT RGB OUT (PC)
Blu-Ray / HD Cable Box / DVD
PC
36
MAKING CONNECTIONS
ENGLISH
ENG
(Only 22/28LY54**)
EXTERNAL
AUDIO IN
OPTICAL
SPEAKER (COMPONENT DIGITAL
OUT
/ DVI)
AUDIO OUT
COMPONENT
IN
DC-IN
(19V
+
-
UP
COMPONENT
IN
DOWN
Control port for
Speaker out
BLUE
RED
BLUE
RED
LEFT
GND
GREEN GREEN
GND
RIGHT
AUDIO IN
(COMPONENT
/ DVI)
AUDIO IN
(COMPONENT
/ DVI)
RED
WHITE
RED
BLUE
GREEN
L
VIDEO
(Only
Satellite Models)
ANTENNA
/ CABLE IN
RS-232C IN
(CONTROL & SERVICE)
VOLUME
CONTROL
)
13/18V
700mA Max
LNB
Satellite IN
AV
(RGB)
IN 1
HDMI
DVI OUT
AUDIO OUT
R
AUDIO
OPTICAL AUDIO IN
Blu-Ray / HD STB / HD Cable Box
/ DVD / PC
Blu-Ray / HD Cable Box / DVD
Digital Audio
Systerm
MAKING CONNECTIONS
37
ENGLISH
ENG
(Only 22/28LY33**, 22/28LY34**, 22/28LY54**)
AUDIO IN
(COMPONENT
/RGB/DVI)
or
USB
MHL passive cable
Mobile Phone
H/P OUT
AUDIO IN
(COMPONENT
/ DVI)
IN 2
(MHL)
USB IN
PCMCIA Card
Headphone
HDMI
DVI OUT
AUDIO OUT
Blu-Ray / HD STB / HD Cable Box / DVD /
PC
38
MAKING CONNECTIONS
ENGLISH
ENG
(Only 28LY31**)
(Only
Satellite Models)
(Only Support
Network Model)
13/18V
700mA Max
LNB
Satellite IN
DC-IN
(19V
)
L
(MONO)
R
MHL
passive cable
L
L
(MONO)
L
R
(MONO)
(MONO)
R
R
RED
WHITE
RED
WHITE
RED
BLUE
GREEN
RED
WHITE
YELLOW
Mobile
Phone
RED
WHITE
RED
BLUE
GREEN
RED
WHITE
YELLOW
AUDIO OUT
L (MONO)
DVI OUT
R
Blu-Ray / HD Cable Box
/ DVD / VCR
Blu-Ray / HD Cable Box
/ DVD
Blu-Ray / HD Cable Box / DVD /
PC
Blu-Ray / DVD / HD
STB /
HD Cable Box / PC
MAKING CONNECTIONS
39
ENGLISH
ENG
(Only 28LY31**)
H/P
USB IN
PCMCIA Card
USB / HDD1
Headphone
1 USB port supports 0.5A electric current. If you need more electric current in case of HDD, use the
separate power adaptor.
40
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the
remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries
(1.5 V AAA) matching the
and
ends to the label inside the
compartment, and close the battery cover.
To remove the batteries, perform the installation actions in
reverse.
or
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
Make sure to point the remote control toward the remote control sensor on the TV.
(Only LY33**, LY34**, LY540S)
RATIO
TV/
RAD
AV MODE
INPUT
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AV MODE Selects an AV mode.
.,;@
abc
def
RATIO
Resizes an image.
INPUT
Changes the input source.
ghi
jkl
mno
Number buttons Enters numbers.
LIST Accesses
the
saved
programme list.
pqrs
tuv
wxyz
Q.VIEW Returns to the previously viewed programme.
+
- Adjusts
Q.VIEW level.
LIST the volume
FAV Accesses your favourite programme list.
GUIDE Shows programme
guide.
FAV
MUTE
Mutes all sounds.PA
G
P saved
E
ꕌPꕍ Scrolls through the
programmes.
ꕌPAGEꕍ Moves
to
the
previous
or next screen.
MUTE
Teletext buttons ( TEXT/T.OPT) These buttons are used for teletext.
INFO
Views the information of the current programme and screen.
SETTINGS
APPS
SETTINGS AccessesMYthe
main menus.
Q.MENU Accesses the quick menus.
OK
Selects menus or options and confirms your input.
OK (up/down/left/right) Scrolls through menus or
Navigation buttons
options.
BACK Returns to the previous level.
EXIT Clears all on-screen displays and return to TV viewing.
1
2
3
4
5
6
7
8
9
0
[
ENGLISH
ENG
REMOTE CONTROL
FAV
GUIDE
MUTE
P
PAGE
*
Accesses
the AV devices connected with the HDMI
cable through HDMI-CEC. Opens the SIMPLINK menu.
AD By pressing the AD button, audio descriptions function will be
enabled.
Control buttons (
) Controls the MY MEDIA menus or
the SIMPLINK compatible devices (USB, SIMPLINK).
Coloured buttons These
REC access special functions in some menus.
(
: Red,
: Green,
: Yellow,
: Blue)
REC/
EXIT
SUBTITLE
LIVE TV
INFO
REMOTE CONTROL
41
ENERGY
AV MODE
ENGLISH
ENG
(Only LY540H, LY541H)
(POWER) Turns the TV on or off.
ꕊ ENERGY SAVING Adjusts the brightness of the screen to
reduce energy consumption.
AV MODE Selects an AV mode.
INPUT Changes the input source.
TV/RAD
Selects Radio, TV and DTV programme.
INPUT
TV/
RAD
SAVING
1
2
3
4
5
6
7
8
9
LIST
0
Q.VIEW
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV
RATIO
P
MUTE
GUIDE PORTAL INFO
OK
SETTINGS
Q.MENU
EXIT
AD
ALARM
P
A
G
E
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
RATIO Resizes an image.
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
PAGE Moves to the previous or next screen.
GUIDE Shows programme guide.
PORTAL Displays and removes hotel interactive menu.
INFO
Views the information of the current programme and screen.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK
Selects menus or options and confirms your input.
SETTINGS Selects a menu. Clears all on-screen displays and
returns to TV viewing from any menu.
(BACK) Returns to the previous level.
EXIT
Clears on-screen displays and return to TV viewing.
Coloured buttons These access special functions in some
menus. (
: Red,
: Green,
: Yellow,
: Blue)
Teletext buttons ( TEXT/T.OPT) These buttons are used for
teletext.
SUBTITLE Recalls your preferred subtitle in digital mode.
Control buttons (
) Controls the MY MEDIA
menus, or the SIMPLINK compatible devices (USB,SIMPLINK).
Accesses the AV devices connected with the HDMI
cable through HDMI-CEC. Opens the SIMPLINK menu.
Q.MENU Accesses the Quick menus.
AD By pressing the AD button, audio descriptions function will be
enabled.
ALARM Sets the alarm function. (depending on model)
42
REMOTE CONTROL
ENGLISH
ENG
(Only LY540M)
(POWER)
Turns the TV on or off.
TV/RAD
TV/
RAD
Selects Radio, TV and DTV programme.
Q.MENU Accesses the quick menus.
AV MODE Selects an AV mode.
SUBTITLE Recalls your preferred subtitle in digital mode.
AV MODE
INPUT
Changes the input source.
Number buttons
LIST
Accesses the saved programme list.
Q.VIEW
MUTE
GUIDE
PORTAL
Returns to the previously viewed programme.
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
AD By pressing the AD button, audio descriptions function will
be enabled.
FAV
AD
Enters numbers.
P
PAGE
MUTE
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
GUIDE Shows programme guide.
PORTAL Displays and removes hotel interactive menu.
INFO
Views the information of the current programme and
screen.
Teletext buttons (
teletext.
OK
TEXT/T.OPT)
These buttons are used for
Selects menus or options and confirms your input.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
BACK Returns to the previous level.
EXIT Clears all on-screen displays and return to TV viewing.
SETTINGS Accesses the main menus.
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.
Control buttons (
) Controls the MY MEDIA
menus or the SIMPLINK compatible devices (USB, SIMPLINK).
Coloured buttons
menus. (
: Red,
These access special functions in some
: Green,
: Yellow,
: Blue)
REMOTE CONTROL
(POWER)
Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
TV/
RAD
PIP/
INPUT
AD
SUBTITLE
1
4
7
LIST
TV/PC
2
5
8
0
3
6
9
Q.VIEW
FAV
GUIDE
P
MUTE
TEXT
INFO
SETTINGS
T.OPT
Q.MENU
PIP/
Turns the PIP mode on or off. (Depending on model)
AD By pressing the AD button, audio descriptions function will
be enabled.
TV/PC Selects TV or PC mode.
INPUT
Changes the input source.
Number buttons
LIST
Enters numbers.
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
GUIDE
MUTE
Shows programme guide.
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
Teletext buttons ( TEXT/T.OPT) These buttons are used for
teletext.
INFO
Views the information of the current programme and
screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the quick menus.
OK
EXIT
REC/
Selects menus or options and confirms your input.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
BACK Returns to the previous level.
EXIT Clears all on-screen displays and return to TV viewing.
Accesses the AV devices connected with the
HDMI cable through HDMI-CEC. Opens the SIMPLINK menu.
REC/
Start to record and display record menu. (Depending
on model)
Control buttons (
) Controls the MY MEDIA
menus or the SIMPLINK compatible devices (USB, SIMPLINK).
Coloured buttons
menus. (
: Red,
These access special functions in some
: Green,
: Yellow,
: Blue)
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
NOTE
yy On MHEG channel, you cannot adjust the backlight with the yellow or blue key.
ENGLISH
ENG
(Only 28LY31**)
43
44
REMOTE CONTROL
ENGLISH
ENG
(Only 32/42/49LY31**)
(POWER)
TV/
RAD
RATIO
SUBTITLE
1
4
7
LIST
INPUT
AD
2
5
8
0
3
6
9
Q.VIEW
FAV
GUIDE
MUTE
TEXT
INFO
SETTINGS
T.OPT
Q.MENU
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AD By pressing the AD button, audio descriptions function will
be enabled.
RATIO
Resizes an image.
INPUT
Changes the input source.
Number buttons
LIST
Enters numbers.
Accesses the saved programme list.
Q.VIEW
Returns to the previously viewed programme.
+
- Adjusts the volume level.
FAV Accesses your favourite programme list.
GUIDE
P
Turns the TV on or off.
TV/RAD
MUTE
Shows programme guide.
Mutes all sounds.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
Teletext buttons ( TEXT/T.OPT) These buttons are used for
teletext.
INFO
Views the information of the current programme and
screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the quick menus.
EXIT
AV MODE
REC/
OK
Selects menus or options and confirms your input.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
BACK Returns to the previous level.
EXIT Clears all on-screen displays and return to TV viewing.
AV MODE Selects an AV mode.
REC/
Start to record and display record menu. (Depending
on model)
Control buttons (
) Controls the MY MEDIA
menus or the SIMPLINK compatible devices (USB, SIMPLINK).
Coloured buttons
menus. (
: Red,
These access special functions in some
: Green,
: Yellow,
: Blue)
MAINTENANCE
45
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
ENGLISH
ENG
MAINTENANCE
46
TROUBLESHOOTING
ENGLISH
ENG
TROUBLESHOOTING
The software version can be updated for improvement in performance.Customer needs to ensure the
compatibility of customer’s equipment with LGE software. If needed, please consult with LGE and
upload revised software version according to the guidance provided by LGE.
Problem
Solution
Cannot control the TV
with the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the
remote control.
yy Check if the batteries are still working and properly installed (
to ,
to ).
No image display and no
sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
yy Check the power control settings. The power supply may be
interrupted.
yy Check if the Automatic Standby (Depending on model) / Sleep
Timer / Off Time feature is activated in the TIME settings.
When connecting to the
PC (RGB/HDMI/ DVI), ‘No
signal’ or ‘Invalid Format’
is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the RGB/HDMI cable.
yy Restart the PC with the TV on.
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
MODELS
22LY33**
28LY33**
22LY330C-ZA
28LY330C-ZA
Dimensions
(W x H x D)
With stand (mm)
507.6 x 355.9 x 140.6
641.5 x 432 x 175
Without stand(mm)
507.6 x 315.7 x 53.1
641.5 x 395.8 x 57.6
Weight
With stand (kg)
3.1
4.6
Without stand (kg)
Power requirement
Power consumption
MODELS
2.9
19 V
4.4
2.0 A
35 W
19 V
2.0 A
40 W
32LY330*
39LY330*
32LY330C-ZA
39LY330C-ZA
Dimensions
(W x H x D)
With stand (mm)
732 x 481 x 207
885 x 567 x 218
Without stand(mm)
732 x 437 x 55.5
885 x 524 x 55.5
Weight
With stand (kg)
6.2
8.3
Without stand (kg)
6.0
8
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
65 W
90 W
42LY330*
47LY330*
MODELS
42LY330C-ZA
47LY330C-ZA
Dimensions
(W x H x D)
With stand (mm)
961 x 612 x 218
1073 x 676 x 247
Without stand (mm)
961 x 567 x 55.5
1073 x 629 x 55.8
Weight
With stand (kg)
9.5
12.7
Without stand (kg)
9.2
12.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W
110 W
MODELS
55LY330*
60LY330*
55LY330C-ZA
60LY330C-ZA
Dimensions
(W x H x D)
With stand (mm)
1243 x 772 x 247
1373 x 851 x 283
Without stand (mm)
1243 x 725 x 56.8
1373 x 801 x 58.8
Weight
With stand (kg)
17.7
23.5
17.3
23.0
Power requirement
Without stand (kg)
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W
130 W
ENGLISH
ENG
SPECIFICATIONS
47
48
SPECIFICATIONS
ENGLISH
ENG
MODELS
22LY34**
28LY34**
22LY340C-ZA
28LY340C-ZA
Dimensions
(W x H x D)
With stand (mm)
507.6 x 355.9 x 140.6
641.5 x 432 x 175
Without stand(mm)
507.6 x 315.7 x 53.1
641.5 x 395.8 x 57.6
Weight
With stand (kg)
3.1
4.6
Without stand (kg)
2.9
4.4
Power requirement
Power consumption
MODELS
19 V
2.0 A
19 V
35 W
40 W
32LY340*
32LY345*
32LY340C-ZA
32LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
732 x 481 x 207
Without stand(mm)
732 x 437 x 55.5
Weight
With stand (kg)
6.2
Without stand (kg)
6.0
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
65 W
MODELS
39LY340*
39LY345*
39LY340C-ZA
39LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
885 x 567 x 218
Without stand(mm)
885 x 524 x 55.5
Weight
With stand (kg)
8.3
Without stand (kg)
Power requirement
8
AC 100-240 V~ 50 / 60 Hz
Power consumption
MODELS
2.0 A
90 W
42LY340*
42LY345*
42LY340C-ZA
42LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
961 x 612 x 218
Without stand(mm)
961 x 567 x 55.5
Weight
With stand (kg)
9.5
Without stand (kg)
9.2
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W
SPECIFICATIONS
47LY340*
47LY345*
47LY340C-ZA
47LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
1073 x 676 x 247
Without stand (mm)
1073 x 629 x 55.8
Weight
With stand (kg)
12.7
Without stand (kg)
12.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
110 W
MODELS
55LY340*
55LY345*
55LY340C-ZA
55LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
1243 x 772 x 247
Without stand (mm)
1243 x 725 x 56.8
Weight
With stand (kg)
17.7
Without stand (kg)
17.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W
MODELS
60LY340*
60LY345*
60LY340C-ZA
60LY345C-ZA
Dimensions
(W x H x D)
With stand (mm)
1373 x 851 x 283
Without stand (mm)
1373 x 801 x 58.8
Weight
With stand (kg)
23.5
Without stand (kg)
23.0
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W
MODELS
22LY54**
28LY54**
22LY540H-ZA
22LY540M-ZA
28LY540H-ZA
28LY540M-ZA
Dimensions
(W x H x D)
With stand (mm)
507.6 x 355.9 x 140.6
641.5 x 432 x 175
Without stand (mm)
507.6 x 315.7 x 53.1
641.5 x 395.8 x 57.6
Weight
With stand (kg)
3.1
4.6
Without stand (kg)
Power requirement
Power consumption
2.9
19 V
4.4
2.0 A
35 W
19 V
2.0 A
40 W
ENGLISH
ENG
MODELS
49
50
SPECIFICATIONS
ENGLISH
ENG
MODELS
32LY540*
39LY540*
32LY540H-ZA
32LY540S-ZA
39LY540H-ZA
39LY540S-ZA
Dimensions
(W x H x D)
With stand (mm)
732 x 481 x 207
885 x 567 x 218
Without stand (mm)
732 x 437 x 55.5
885 x 524 x 55.5
Weight
With stand (kg)
6.2
8.3
6.0
8
Power requirement
Without stand (kg)
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
65 W
90 W
42LY540*
47LY540*
42LY540H-ZA
42LY540S-ZA
47LY540H-ZA
47LY540S-ZA
MODELS
Dimensions
(W x H x D)
With stand (mm)
961 x 612 x 218
1073 x 676 x 247
Without stand (mm)
961 x 567 x 55.5
1073 x 629 x 55.8
Weight
With stand (kg)
9.5
12.7
Without stand (kg)
9.2
12.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W
110 W
55LY540*
60LY540*
55LY540H-ZA
55LY540S-ZA
60LY540S-ZA
MODELS
Dimensions
(W x H x D)
With stand (mm)
1243 x 772 x 247
1373 x 851 x 283
Without stand (mm)
1243 x 725 x 56.8
1373 x 801 x 58.8
Weight
With stand (kg)
17.7
23.5
Without stand (kg)
17.3
23.0
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
Power consumption
MODELS
130 W
130 W
32LY541­*
39LY541*
32LY541H-ZA
39LY541H-ZA
Dimensions
(W x H x D)
With stand (mm)
732 x 482 x 282
885 x 572 x 282
Without stand (mm)
732 x 437 x 55.5
885 x 524 x 55.5
Weight
With stand (kg)
8.9
10.9
Without stand (kg)
6.0
8
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
65 W
90 W
SPECIFICATIONS
42LY541*
47LY541*
42LY541H-ZA
47LY541H-ZA
Dimensions
(W x H x D)
With stand (mm)
961 x 617 x 325
1073 x 680 x 325
Without stand (mm)
961 x 567 x 55.5
1073 x 629 x 55.8
Weight
With stand (kg)
12.6
15.7
Without stand (kg)
9.2
12.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W
110 W
MODELS
55LY541*
28LY31**
55LY541H-ZA
28LY310C-ZA
Dimensions
(W x H x D)
With stand (mm)
1243 x 771 x 325
641.5 x 432 x 175
Without stand (mm)
1243 x 725 x 56.8
641.5 x 395.8 x 57.6
Weight
With stand (kg)
20.7
4.6
Without stand (kg)
17.3
4.4
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W
MODELS
19 V
2.0 A
40 W
32LY31**
42LY31**
32LY310C-ZA
42LY310C-ZA
Dimensions
(W x H x D)
With stand (mm)
731 x 480 x 208
959 x 611 x 218
Without stand (mm)
731 x 437 x 56.5
959 x 570 x 56.2
Weight
With stand (kg)
5.9
9.5
Without stand (kg)
5.7
9.2
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
Power consumption
MODELS
65 W
100 W
49LY31**
32LY331­*
49LY310C-ZA
32LY331C-ZA
Dimensions
(W x H x D)
With stand (mm)
1105 x 694 x 247
732 x 482 x 282
Without stand (mm)
1105 x 652 x 56.5
732 x 437 x 55.5
Weight
With stand (kg)
13.6
8.9
Without stand (kg)
13.2
6.0
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
110 W
65 W
ENGLISH
ENG
MODELS
51
52
SPECIFICATIONS
ENGLISH
ENG
MODELS
39LY331­*
42LY331­*
39LY331C-ZA
42LY331C-ZA
Dimensions
(W x H x D)
With stand (mm)
885 x 572 x 282
961 x 617 x 325
Without stand (mm)
885 x 524 x 55.5
961 x 567 x 55.5
Weight
With stand (kg)
10.9
12.6
8
9.2
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
90 W
100 W
Without stand (kg)
MODELS
47LY331­*
55LY331­*
47LY331C-ZA
55LY331C-ZA
Dimensions
(W x H x D)
With stand (mm)
1073 x 680 x 325
1243 x 771 x 325
Without stand (mm)
1073 x 629 x 55.8
1243 x 725 x 56.8
Weight
With stand (kg)
15.7
20.7
Without stand (kg)
12.3
17.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
110 W
130 W
MODELS
32LY341­*
39LY341­*
32LY341C-ZA
39LY341C-ZA
Dimensions
(W x H x D)
With stand (mm)
732 x 482 x 282
885 x 572 x 282
Without stand (mm)
732 x 437 x 55.5
885 x 524 x 55.5
Weight
With stand (kg)
8.9
10.9
Without stand (kg)
6.0
8
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
Power consumption
MODELS
65 W
90 W
42LY341­*
47LY341­*
42LY341C-ZA
47LY341C-ZA
Dimensions
(W x H x D)
With stand (mm)
961 x 617 x 325
1073 x 680 x 325
Without stand (mm)
961 x 567 x 55.5
1073 x 629 x 55.8
Weight
With stand (kg)
12.6
15.7
Without stand (kg)
9.2
12.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power consumption
100 W
110 W
SPECIFICATIONS
ENGLISH
ENG
55LY341­*
MODELS
55LY341C-ZA
Dimensions
(W x H x D)
With stand (mm)
1243 x 771 x 325
Without stand (mm)
1243 x 725 x 56.8
Weight
With stand (kg)
20.7
Without stand (kg)
17.3
Power requirement
AC 100-240 V~ 50 / 60 Hz
Power consumption
130 W
AC/DC Adapter
(Only 22/28LY33**, 22/28LY34**,
22/28LY54**)
AC/DC Adapter
(Only 28LY31**)
Manufacturer : APD
Model : DA-48F19, DA-40I19
Manufacturer : Lien chang
Model : LCAP35
Manufacturer : Lien Chang
Model : LCAP25B
Manufacturer : LG Innotek
Model : PSABL-204B
CI Module Size (W x H x D)
Operating Temperature
Environment
condition
53
100.0 mm x 55.0 mm x 5.0 mm
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
54
SPECIFICATIONS
ENGLISH
ENG
Satellite Digital TV1
Digital TV
DVB-T/T2
DVB-C
DVB-S/S2
DVB-T
DVB-C
VHF, UHF
C-Band, Ku-Band
VHF, UHF
Television system
Programme coverage
Maximum number of storable
programmes
External antenna impedance
Analogue TV
PAL/SECAM B/G/D/K,
PAL I/I’,
SECAM L/L’2
VHF: E2 to E12,
UHF : E21 to E69,
CATV: S1 to S20,
HYPER: S21 to S47
6,000
1,500
75 Ω
1 Satellite and DVB-T2 support models
2 Except for DVB-T2 support models
Component port connecting information
Component ports on the
TV
Video output ports on
DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
Y
Y
HDMI/DVI-DTV Supported Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
R-Y
720 x 480
31.469
31.5
59.94
60
Cb
Cr
720 x 576
31.25
50
Pb
Pr
1280 x 720
37.5
44.96
45
50
59.94
60
1920 x 1080i
33.72
33.75
28.125
59.94
60
50
1920 x 1080p
26.97
27
33.716
33.75
56.25
67.43
67.5
23.97
24
29.976
30.00
50
59.94
60
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(50 Hz / 60 Hz only)
SPECIFICATIONS
HDMI/DVI-PC Supported Mode
ENGLISH
ENG
RGB-PC, HDMI/DVI-PC Supported Mode
(Use HDMI IN 1 for PC mode)
(Only 22/28/32/39/42/47/55/60LY33**,
22/28/32/39/42/47/55/60LY34**)
55
(Use HDMI IN 1 for PC mode)
(Only 22/28/32/39/42/47/55/60LY54**,
32/42/49LY31**)
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
59.94
800 x 600
37.879
60.31
60.31
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
800 x 600
37.879
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
(RGB-PC)
66.587
59.934
1920 x 1080
(FHD only)
67.50
60.00
(Except for 22/28LY33**, 22/28LY34**,
32LY330C, 32LY340C, 32LY331C,
32LY341C)
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.50
60.00
(Except for 22/28LY54**)
HDMI (PC) supported mode
(Only 28LY31**)
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 400
31.468
70.080
640 x 480
31.469
37.500
59.940
75.000
800 x 600
37.879
46.875
60.317
75.000
1024 x 768
48.363
60.023
60.004
75.029
1280 x 800
49.702
59.810
1366 x 768
47.717
59.79
NOTE
yy The optimal display resolution
--1366 X 768 @60Hz
yy The optimal timing in each mode is vertical
frequency 60Hz.
56
IR CODES
ENGLISH
ENG
IR CODES
yy This feature is not available for all models.
Code
(Hexa)
08
Function
(POWER)
Note
Code
(Hexa)
Function
Note
Remote control Button
(Power On/Off)
44
OK
Remote control Button
Remote control Button
F0
TV/RAD
Remote control Button
40
39
SUBTITLE
Remote control Button
41
^
v
91
AD
Remote control Button
07
<
Remote control Button
79
RATIO
Remote control Button
06
>
Remote control Button
0B
INPUT
Remote control Button
72
RED
Remote control Button
10-19
Number Key 0-9
Remote control Button
71
GREEN
Remote control Button
YELLOW /
Remote control Button
53
LIST
Remote control Button
63
1A
Q.VIEW
Remote control Button
61
02
+
Remote control Button
B1
n
Remote control Button
03
-
Remote control Button
B0
Remote control Button
1E
FAV
Remote control Button
BA
►
yy
AB
GUIDE
Remote control Button
8E
►►
Remote control Button
09
MUTE
Remote control Button
8F
◄◄
Remote control Button
00
P ꕌ / PAGE ꕌ
Remote control Button
7E
SIMPLINK
Remote control Button
01
P ꕍ / PAGE ꕍ
Remote control Button
30
AV MODE
Remote control Button
20
TEXT
Remote control Button
E8
ALARM
Remote control Button
21
T.OPT(T.Option)
Remote control Button
0C
PORTAL
Remote control Button
Remote control Button
BLUE /
Remote control Button
Remote control Button
Remote control Button
43
SETTINGS
Remote control Button
95
ENERGY
SAVING
45
Q.MENU
Remote control Button
60
PIP/
Remote control Button
AA
INFO
Remote control Button
9B
TV/PC
Remote control Button
28
BACK
Remote control Button
BD
REC/
Remote control Button
5B
EXIT
Remote control Button
EXTERNAL CONTROL DEVICE SETUP
57
RS-232C Setup
yy Image shown may differ from your TV.
Type of Connector:
D-Sub 9-Pin Male
Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V
control system) to control the product’s functions externally.
Connect the serial port of the control device to the RS232C jack on the product back panel.
1
NOTE
5
6
yy RS-232C connection cables are not
supplied with the product.
RS-232C IN
(CONTROL & SERVICE)
(*Not Provided)
No.
9
Pin name
1
3.5 V
2
RXD (Receive data)
3
TXD (Transmit data)
4
IR OUT from TV
5
GND
6
No Connection
7
No Connection (5 V available in LY54**)
8
9
No Connection
No Connection (12 V available in LY54**)
ENGLISH
ENG
EXTERNAL CONTROL DEVICE SETUP
58
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
RS-232C Configurations
RXD
TXD
GND
DTR
DSR
RTS
CTS
Set ID
Set ID number. “Real Data Mapping”.
7-Wire Configurations
(Standard RS-232C cable)
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
3-Wire Configurations
(Not standard)
RXD
TXD
GND
DTR
DSR
RTS
CTS
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
TXD
RXD
GND
DTR
DSR
RTS
CTS
1 Press SETTINGS or HOME to access the
main menus.
2 Press the Navigation buttons to scroll to
OPTION and press OK.
3 Press the Navigation buttons to scroll to Set
ID and press OK.
4 Scroll left or right to select a set ID number
and select Close. The adjustment range is
1-99.
5 When you are finished, press EXIT.
EXTERNAL CONTROL DEVICE SETUP
59
yy Baud rate: 9600 bps (UART)
yy Data length: 8 bits
yy Parity : None
ENGLISH
ENG
Communication Parameters
yy Stop bit: 1 bit
yy Communication code: ASCII code
yy Use a crossed (reverse) cable.
Command Reference List
(Depending on Model)
DATA
(Hexadecimal)
COMMAND1
COMMAND2
01. Power
k
a
02. Aspect Ratio
k
c
03. Screen Mute
k
d
04. Volume Mute
k
e
k
f
k
g
07. Brightness
k
h
00 to 64
08. Colour
k
i
00 to 64
09. Tint
k
j
00 to 64
10. Sharpness
k
k
00 to 32
11. OSD Select
k
l
00 to 01
05. Volume
Control
06. Contrast
COMCOMMAND1 MAND2
12. Remote
Control
Lock Mode
(See p.61) 13. Balance
14. Colour
(See p.61)
Temperature
15. Energy
00 to 01
Saving
16. Auto Con00 to 64
figuration
00 to 64 17. Equalize
00 to 01
18. Tune Command
19. Programme
Add/Skip
20. Key
21. Control
Back Light
22. Input select
(Main)
DATA
(Hexadecimal)
k
m
00 to 01
k
t
00 to 64
x
u
00 to 64
j
q
00 to 05
j
u
01
j
v
(See p.63)
m
a
(See p.63)
m
b
00 to 01
m
m
c
g
(See p.64)
00 to 64
x
b
(See p.64)
NOTE
yy During USB operations such as DivX or EMF, all commands except Power(ka) and Key(mc) are
not executed and treated as NG.
60
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command 1]
[Command 2]
[Set ID]
: First command to control the TV.(j, k, m or x)
: Second command to control the TV.
: You can adjust the set ID to choose desired monitor ID number in option menu.
Adjustment range is 1 to 99. When selecting Set ID ‘0’, every connected set is controlled.
Set ID is indicated as decimal (1 to 99) on menu and as Hexa decimal (0x0 to
0x63) on transmission/receiving protocol.
[DATA] : To transmit command data.Transmit ‘FF’ data to read status of command.
[Cr] : Carriage Return
ASCII code ‘0x0D’
[ ]
: ASCII code ‘space (0x20)’
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving normal data. At this
time, if the data is data read mode, it indicates present status data. If the data is data write mode, it
returns the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* The set transmits ACK (acknowledgement) based on this format when receiving abnormal data from
non-viable functions or communication errors.
Data 00: Illegal Code
EXTERNAL CONTROL DEVICE SETUP
03. Screen Mute (Command: k d)
►► To control Power On/Off of the set.
►► To select screen mute on/off.
Transmission[k][a][ ][Set ID][ ][Data][Cr]
Data 00 : Power Off
01 : Power On
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
►► To Show TV is Power On/Off.
Transmission [k][a][ ][Set ID][ ][FF][Cr]
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
* Similarly, if other functions transmit ‘0xFF’
data based on this format, Acknowledgement
data feed back presents status about each
function.
* OK Ack., Error Ack. and other message may
display on the screen when TV is power On.
Transmission [k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video mute off
01 : Screen mute on (Picture off)
10 : Video mute on
Ack [d][ ][Set ID][ ][OK/NG][Data][x]
* In case of video mute on only, TV will display
On Screen Display(OSD). But, in case of
Screen mute on, TV will not display OSD.
04. Volume Mute (Command: k e)
►► To control volume mute on/off.
You can also adjust mute using the MUTE
button on remote control.
Transmission [k][e][ ][Set ID][ ][Data][Cr]
02. Aspect Ratio (Command: k c)
(Main Picture Size)
►► To adjust the screen format. (Main picture
format) You can also adjust the screen format
using the Aspect Ratio in the Q.MENU. or
PICTURE menu.
Transmission [k][c][ ][Set ID][ ][Data][Cr]
Data 01 : N
ormal screen
(4:3)
02 : Wide screen
(16:9)
04 : Zoom
06 : Original
07 : 14:9
09 : Just Scan
0B : Full Wide
10 to 1F : C
inema Zoom
1 to 16
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
* Using the PC input, you select either 16:9 or
4:3 screen aspect ratio.
* In DTV/HDMI (1080i 50 Hz / 60 Hz, 720p
50Hz / 60 Hz, 1080p 24 Hz / 30 Hz / 50 Hz /
60 Hz), Component( 720p, 1080i, 1080p 50
Hz / 60 Hz) mode, Just Scan is available.
* Full Wide is supported only for Digital,
Analogue, AV.
Data 00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Ack [e][ ][Set ID][ ][OK/NG][Data][x]
05. Volume Control (Command: k f)
►► To adjust volume.
You can also adjust volume with the volume
buttons on remote control.
Transmission [k][f][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.64.
Ack [f][ ][Set ID][ ][OK/NG][Data][x]
06. Contrast (Command: k g)
►► To adjust screen contrast.
You can also adjust contrast in the PICTURE
menu.
Transmission [k][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
* Refer to ‘Real data mapping’. See p.64.
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
ENGLISH
ENG
01. Power (Command: k a)
61
62
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
07. Brightness (Command: k h)
11. OSD Select (Command: k l)
►► To adjust screen brightness.
You can also adjust brightness in the
PICTURE menu.
►► To select OSD (On Screen Display) on/off
when controlling remotely.
Transmission [k][h][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 64
* Refer to ‘Real data mapping’. See p.64.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
01 : OSD on
Ack [l][ ][Set ID][ ][OK/NG][Data][x]
Ack [h][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock mode (Command: k m)
08. Colour (Command: k i)
►► To adjust the screen Colour.
You can also adjust colour in the PICTURE
menu.
Transmission [k][i][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 64
* Refer to ‘Real data mapping’. See p.64.
Ack [i][ ][Set ID][ ][OK/NG][Data][x]
09. Tint (Command: k j)
►► To adjust the screen tint.
You can also adjust tint in the PICTURE
menu.
Transmission [k][j][ ][Set ID][ ][Data][Cr]
Data Red : 0
0 to Green : 64
* Refer to ‘Real data mapping’. See p.64.
Ack [j][ ][Set ID][ ][OK/NG][Data][x]
►► To lock the front panel controls on the
monitor and remote control.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00 : Lock off
01 : Lock on
Ack [m][ ][Set ID][ ][OK/NG][Data][x]
* If you are not using the remote control,
use this mode. When main power is on/off,
external control lock is released.
* In the standby mode, if key lock is on, TV will
not turn on by power on key of IR & Local Key.
13. Balance (Command: k t)
►► To adjust balance.
You can also adjust balance in the AUDIO
menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data L : 00 to R : 64
* Refer to ‘Real data mapping’. See p.64.
10. Sharpness (Command: k k)
►► To adjust the screen sharpness.
You can also adjust sharpness in the
PICTURE menu.
Transmission [k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0
0 to Max : 32
* Refer to ‘Real data mapping’. See p.64.
Ack [k][ ][Set ID][ ][OK/NG][Data][x]
Ack [t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: x u)
►► To adjust colour temperature. You can also
adjust Colour Temperature in the PICTURE
menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Warm: 00 to Cool:64
* Refer to ‘Real data mapping’. See p.64.
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
EXTERNAL CONTROL DEVICE SETUP
►► To reduce the power consumption of the
TV. You can also adjust Energy Saving in
PICTURE menu.
Transmission [j][q][ ][Set ID][ ][Data][Cr]
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Level
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Low
Power
Description
...
1
0
0
0
0
0
Off
0
0
0
1
Minimum
0
0
1
0
Medium
0
0
1
1 Maximum
0
1
0
1 Screen Off
Data 00 : High channel data
0
1
0
0
Data 01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 : [Antena]
0x00 : Analog Main
0x10 : DTV Main
0x20 : Radio
Ack [v][ ][Set ID][ ][OK/NG][Data][x]
Auto
►► To adjust picture position and minimize
image shaking automatically. It works only in
RGB (PC) mode.
Transmission [j][u][ ][Set ID][ ][Data][Cr]
Data 01 : To set
Ack [u][ ][Set ID][ ][OK/NG][Data][x]
►► Select channel to following physical number.
Transmission [m][a][ ][Set ID][ ][Data 00][ ]
[Data 01][ ][Data 02][Cr]
[Cable]
0x80 : Analog Main
0x90 : DTV Main
0xA0 : Radio
[Satellite]
0x40 : DTV Main
0x50 : Radio Main
Ack [a][ ][Set ID][ ][OK/NG][Data][x]
Data Min: 00 to Max: 7DH
►► To adjust equalize.
Transmission [j][v][ ][Set ID][ ][Data][Cr]
MSB
LSB
0
18. Tune Command (Command: m a)
Channel data range
Min: 00 Max: 270F (0 to 9999)
17. Equalizer (Command : j v)
0
1 0 0 5th Band 1 0 1 0 0 20(decimal)
2
16. Auto Configure (Command: j u) (Only RGB
support model)
Frequency
0 0 1 2nd Band 0 0 0 0 1 1(decimal)
3
Ack [q][ ][Set ID][ ][OK/NG][Data][x]
0
Step
0 0 0 0 0 0(decimal)
0 1 0 3rd Band ... ... ... ... ...
►► 'Auto' is available in TV that supports
'Intelligent Sensor'.
0
0 0 0 1st Band
0 1 1 4th Band 1 0 0 1 1 19(decimal)
Power Saving
Function
7 6 5 4
0
7 6 5 Frequency 4 3 2 1 0
0
0
Data
0
0
ENGLISH
ENG
15. Energy Saving (Command: j q)
63
64
EXTERNAL CONTROL DEVICE SETUP
ENGLISH
ENG
19. Programme Add/Skip (Command: m b)
►► To set skip status for the current Programme.
Transmission [m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB
0
1
1
1
1
0
0
0
1
0
0
1
1
0
1
0
HDMI
20. Key (Command: m c)
►► To send IR remote key code.
Transmission [m][c][ ][Set ID][ ][Data][Cr]
Data Key code - See p.56.
Ack [c][ ][Set ID][ ][OK/NG][Data][x]
Input Number
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Ack [b][ ][Set ID][ ][OK/NG][Data][x]
21. Control Backlight (Command: m g)
►► To control the backlight.
* Real data mapping
Transmission [m][g][ ][Set ID][ ][Data][Cr]
Data Min : 00 to Max : 64
00 :
Step 0
A:
Step 10 (Set ID 10)
F:
10 :
Step 15 (Set ID 15)
Step 16 (Set ID 16)
64 :
Step 100
6E :
Step 110
73 :
74 :
Step 115
Step 116
CF :
Step 199
FE :
FF :
Step 254
Step 255
Ack [g][ ][Set ID][ ][OK/NG][Data][x]
22. Input select (Command: x b)
(Main Picture Input)
►► To select input source for main picture.
Transmission [x][b][ ][Set ID][ ][Data][Cr]
Data Structure
MSB
0
LSB
0
0
0
0
External Input
0
0
Input Number
External Input
Data
0
0
0
0
DTV
0
0
0
1
Analogue
0
Record the model number and serial
number of the TV.
Refer to the label on the back cover and
quote this information to your dealer
when requiring any service.
MODEL
SERIAL
Download PDF

advertising