LG | M4716CCBAP | LG M4716CCBAP Owner’s Manual

ENGLISH
OWNER’S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating
your set and retain it for future reference.
MONITOR SIGNAGE MODELS
M3204C
M4716C
www.lg.com
Table of Contents
Accessories
Connecting the stand
Connecting the Speakers
To install Portrait
Using the Remote Control
Name and Function of the Parts
Connecting to External Devices
3
4
6
7
8
10
12
When Connecting to your PC.............................................................................................12
When using the LAN............................................................................................................14
Daisy Chain Monitors..........................................................................................................15
VESA FDMI wall Mounting..................................................................................................16
Cable Management..............................................................................................................17
Video Input............................................................................................................................18
Component Input (480i/480p/576i/576p/720p/1080i/1080p)...........................................19
HDMI Input (480p/576p/720p/1080i/1080p).......................................................................20
User Menus
21
Screen Adjustment options................................................................................................21
OSD Menu ............................................................................................................................23
How to adjust the OSD (On Screen Display) screen......................................................24
How to adjust the screen automatically...........................................................................24
Adjusting Screen Color.......................................................................................................25
Adjusting the audio function..............................................................................................31
Adjusting the timer function...............................................................................................32
Selecting the options . ........................................................................................................33
Adjusts the tile options.......................................................................................................35
Adjusts the USB options.....................................................................................................37
Troubleshooting
Specifications Controlling the Multiple Product
2
51
54
A1
Accessories
Accessories
Thank you for your purchase. Please check the product as well as the accessories shown below
❖ Note that the accessories may look different from those shown here.
Remote Control
/ Batteries
D-Sub Signal
Cable
Power Cable
CD-ROM / Cards
Separate purchase
Without prior notice, optional accessories are subject to change to improve the performance of the product, and
new accessories may be added.
❖ Optional accessories (purchased separately) may vary depending on the model.
❖ Note that optional accessories may look different from those shown here.
❖ You can obtain additional accessories from most electronics stores.
Stand hole cover Kit < M4716C Only >
Stand hole cover
Screws (2)
Stand Kit
< M3204C >
Stand (2)
< M4716C >
Stand(1)
Screws (4)
Speaker Kit
Screws (4)
Cable management (1)
NC2000 Kit
Cable holder/Cable tie
They may not
be available
in some areas
or for some
models.
Speaker(2)
NC2000
Screws (4)
/ Cable (2)
3
CD-ROM /
Cards
Screws (2)
Connecting the stand
- Only on some models.
< M3204C >
1.
Take the parts for the stand out of the box and assemble them as shown in
the picture.
Parts
First, check if the following parts are all present.
Screws (4)
Stand (2)
2.
lace a soft cloth on the table and put the product with the screen facing
P
downward. Connect the stand as shown in the following picture.
3.
Use the screws to secure the stand on the rear side of the product as shown in the diagram.
4
Connecting the stand
- Only on some models.
< M4716C >
1.
Take the parts for the stand out of the box and assemble them as shown in
the picture.
Parts
First, check if the following parts are all present.
Screws (4)
Stand (1)
Cable management (1)
2.
lace a soft cloth on the table and put the product with the screen facing
P
downward. Connect the stand as shown in the following picture.
3.
Use the screws to secure the stand on the rear side of the product as shown in the diagram.
5
Connecting the Speakers
- Only on some models.
Mount the product onto the speaker by using a screw as shown in the following
connect the speaker cable.
After installing your speakers, use holders and cable ties to organize the speaker
cables.
Cable holder
Remove the paper.
* This feature is not available in all model.
Cable tie
When the speaker is installed.
*Connect the input terminal with a proper
color match.
* This feature is not available in all model.
6
To install Portrait
- Only on some models.
"When installing Portrait, rotate it clockwise based on its front."
Note
< Only M4716C >
• When using the wall mounting bracket or the portrait scene mode, the opening can
be covered by the stand hole cover.
7
Using the Remote Control
Name of the Remote Control Buttons
1
2
3
ENERGY
MONITOR
INPUT
.,!
GHI
1/a/A
SAVING
TUV
-*#
CLEAR
ABC
JKL
DEF
MNO
PSM
P
BRIGHT A
NESS G
Number and Alphabet Buttons
- Type numbers and alphabets.
4
1/a/A Button
- Selects the number and alphabet.(SuperSign
input only)
5
Volume Up/Down Button
- Adjusts the volume.
6
PSM Button
- Selects the Picture Status Mode.
7
MUTE Button
- Switches the sound on or off.
8
MENU Button
- Selects a menu.
- Clears all on-screen displays and returns to
TV viewing from any menu.
9
Up/Down/Left/Right Buttons
- Allows you to navigate the on-screen menus
and adjust the system settings to your
preferenc.
E
MUTE
MENU
9
AUTO
S.MENU
OK
10
13
3
WXYZ
ARC
7
12
Monitor On / Off Button
- Turn off the monitor and then turn it back on.
MARK
6
11
2
OFF
ON
5
8
Power On / Off Button
- Switches the set on from standby or off to
standby.
POWER
PQRS
4
1
BACK
TILE
ID
ON
OFF
EXIT
10 OK Button
- Accepts your selection or displays the
current mode.
11 BACK button
- Allows the user to move
return one step in an interactive application.
12 ID ON/OFF Button
- When the number of input ID is equal to the
number of ID Mode, you can control the
monitor which you want in the multi display
condition.
13 USB Menu control buttons
- Adjust the USB menu(Photo List, Music List
and Movie List ).
8
Using the Remote Control
POWER
14
ENERGY
MONITOR
INPUT
15
OFF
ON
.,!
GHI
PQRS
1/a/A
TUV
-*#
CLEAR
ABC
JKL
PSM
AUTO
Input List
AV
WXYZ
16
P
BRIGHT A
NESS G
TILE
EXIT
RGB
HDMI/DVI
SuperSign
Clear button
- Delete the numbers and alphabets you
typed.(SuperSign input only)
18
17
ARC Button
- Selects the Aspect Ratio Mode
19
18
Brightness Key
- Adjust the brightness by pressing the Up
and Down buttons on the remote control.
- In USB mode, the OSD menu has the Page
function to move to the next file list.
19
AUTO Button
- Automatically adjusts picture position and
minimizes image instability.(RGB input only)
20
S.MENU Button (SuperSign Menu Key)
- Selects the SuperSign OSD Menu.
(SuperSign input only)
21
EXIT Button
- Clears all on-screen displays and returns to monitor
viewing from any menu.
22
TILE button
- Selects the TILE Mode
E
S.MENU
Component
16
17
20
OK
ID
INPUT Select Button
If you press the button once, the following
Input Signal Window will appear. Select the
signal type you want using the < > button.
MNO
MUTE
ON
15
DEF
ARC
BACK
Energy Saving Button
- Adjust the Energy Saving mode of the SET.
SAVING
MARK
MENU
14
21
22
OFF
Inserting batteries into remote control.
AAA Type
1. Slide off the battery cover.
2. Insert the batteries with correct polarity ( + / - ).
3. Close the battery cover.
4. To remove the batteries, perform the installation actions
in reverse.
• Dispose of used batteries in the recycle bin to prevent
environmental pollution.
9
Name and Function of the Parts
* The product image in the user's guide could be different from the actual image.
Rear View
< M3204C >
1
2
3
4
5
6
7
8
1
Power Connector
Connect the power cord
2
RS-232C Serial Ports
3
RGB, HDMI/DVI Ports
HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals.
4
PC Sound Jack
Connect the audio cable to the *LINE OUT jack of the PC sound card.
5
Component, AV Ports
6
USB Port
7
LAN Port
8
Speaker Ports
* LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card
supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program
(Refer to the Sound Card Manual).
10
Name and Function of the Parts
* The product image in the user's guide could be different from the actual image.
Rear View
< M4716C >
1
2
3
4
5
6
7
8
1
Power Connector
Connect the power cord
2
RS-232C Serial Ports
3
RGB, HDMI/DVI Ports
HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals.
4
PC Sound Jack
Connect the audio cable to the *LINE OUT jack of the PC sound card.
5
Component, AV Ports
6
USB Port
7
LAN Port
8
Speaker Ports
* LINE OUT
A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC
sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card
supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program
(Refer to the Sound Card Manual).
11
Connecting to External Devices
When Connecting to your PC
1
First of all, see if the computer, product and the peripherals are turned off. Then, connect
the signal input cable.
A.
B.
When connecting with the D-Sub signal input cable.
When connecting with the HDMI-DVI signal input cable (not included).
* When HDMI PC is used, a compatiblity problem might occur.
A.
PC
Rear back of the set.
MAC
PC/MAC
Macintosh Adapter (not included)
Use the standard Macintosh adapter since an incompatible
adapter is available in the market. (Different signaling system)
B.
(not included)
Rear back of the set.
PC
*U
ser must use shielded signal interface cables (D-sub 15 pin cable, HDMI-DVI cable) with
ferrite cores to maintain standard compliance for the product.
2
Connect the Audio cable.
Rear back of the set.
3
(not included)
PC
Connect the power cord.
< M3204C >
< M4716C >
Rear back of the set.
12
Connecting to External Devices
4
1.
Turn on power by pressing the power button on the product.
< M3204C >
< M4716C >
On/Off button
2.
On/Off button
Turn on the PC.
5 Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT →
→ OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
A.
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
Input List
AV
B.
Component
RGB
HDMI/DVI
SuperSign
When connecting with a HDMI-DVI signal input cable and HDMI Signal Cable.
• Select HDMI/DVI : DVI Digital signal or HDMI Digital signal.
Input List
AV
Note
Component
RGB
HDMI/DVI
SuperSign
• How to connect to two computers.
Connect the signal cables (HDMI-DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
13
Connecting to External Devices
When using the LAN
1
A.
Connect the LAN cable as shown in the below figure .
B.
Connect PC to Monitor directly.
Using a router(Switch)
LAN
LAN
Switch
Product
Product
PC
PC
C. Using the Internet.
Network
LAN
Network
Product
2
PC
Network
Connect the LAN cable
and install the eZ-Net Manager program on the CD-ROM.
For more information about the program, please refer to eZ-Net Guide in the enclosed
CD-ROM.
Note
• Using LAN establishes communication between your PC and the monitor and
enables to use the OSD menus on the PC as well as on the monitor.
14
Connecting to External Devices
Daisy Chain Monitors
A.
When using RGB input
To use different products connected to each other Connect one end of the signal input cable
(15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end
to the RGB IN connector of other products.
15-pin D-Sub Signal Cable
PC
PC
Product 1
B.
Product 2
Product 3
Product 4
When using AV input
Audio Cable
(not included)
Video
BNC Cable
(not included)
Product 1
Note
Product 2
Product 3
• The number of monitors that can be connected to one output may vary depending on
signal status and cable loss. If the signal status is good, and there is no cable loss, it
is possible to connect up to 9 monitors. If you want to connect more than this number
of monitors, it is recommended to use a distributor.
15
Connecting to External Devices
VESA FDMI wall Mounting
This product supports a VESA FDMI compliant mounting interface. These mounts
are purchased separately and not available from LG. Refer to the instructions
included with wall mount for more info.
< M3204C >
< M4716C >
Kensington Security Slot
The Set is equipped with a kensington Security
System connector on the back panel. The cable
and lock are available separate and are not sold
by LG. For more info, visit http://www.kensington.
com, the internet home page of the Kensington
company.
Note
• T
here is a switch on the lower side of the back. You can set the switch to "On"
before connecting a power cord to make it more convenient for use.
16
Connecting to External Devices
Cable Management
- Only on some models.
< Only M4716C >
1.
Arrange the cables in the center as shown in the following picture.
2.
Fit the cable guide to the back to help manage the cables.
Removing the cable guide.
Cable
Management
Hold the Cable management with both hands
and pull it downward.
Note
• Do not use the cable management as a handle for the Monitor.
17
Connecting to External Devices
Video Input
1
Connect the video cable as shown in the below figure and then connect the
power cord. (See page 12).
When connecting with a BNC cable.
•C
onnect the input terminal with a proper color match.
Product
Audio Cable
(not included)
BNC Cable
(not included)
VCR/DVD Receiver
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT →
→ OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
When connecting with an BNC cable.
• Select AV.
Input List
AV
Component
RGB
HDMI/DVI
SuperSign
18
Connecting to External Devices
Component Input (480i/480p/576i/576p/720p/1080i/1080p)
• 1080p is Only on M4716C model.
1
Connect the video/audio cable as shown in the below figure and then, connect
the power cord (See page 12).
• Connect the input terminal with a proper color match.
Product
BNC Cable
(not included)
Audio Cable
(not included)
HDTV Receiver
Note
- Some devices may require HDCP in order to display HD signals.
- Component doesn't support HDCP.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT →
→ OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
• Select Component.
Input List
AV
Component
RGB
HDMI/DVI
SuperSign
19
Connecting to External Devices
HDMI Input (480p/576p/720p/1080i/1080p)
HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content
Protection). Some devices require HDCP in order to display HD signals.
1 Connect the video/audio cable as shown in the below figure and then connect the power
cord (See page 12).
Product
Product
RCA-PC
Audio Cable
(not included)
HDMI-DVI
Signal Cable
(not included)
HDMI Signal Cable
(not included)
VCR/DVD/Set-top Box
VCR/DVD/Set-top Box
Note : Dolby Digital is not supported.
2
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
INPUT →
→ OK
Or, press the INPUT button on the back of the product.
INPUT →◄ ► → AUTO/SET
When connecting with a HDMI-DVI signal input cable.
When connecting with a HDMI signal input cable.
• Select HDMI/DVI
Input List
AV
Component
RGB
HDMI/DVI
SuperSign
20
User Menus
Screen Adjustment options
< M3204C >
< M4716C >
2
6
3
1
On/Off Button
2
Power Indicator
3
MENU Button
4
OSD Select /
Adjust Button
7
7
4
5
2
1
Press this button to turn on the power. Press this button
again to turn it off.
This Indicator lights up green when the display operates
normally(on mode). If the display is in sleep (Energy Saving)
mode, this indicator color changes to amber.
Use this button to show/hide the OSD (On Screen Display)
menu screen.
Use this button to select an icon or adjust the setting in the OSD
screen.
▲ ▼ Adjust the up and down.
◄ ► Adjust the volume.
21
Volume
35
User Menus
Screen Adjustment options
5
AUTO/SET Button
< M3204C >
[For PC Analog signal]
Auto in progress
For optimal display change
resolution to 1360 x 768
[When XGA Mode is active and
1360 x 768 is selected]
Auto in progress
< M4716C >
[For PC Analog signal]
Auto in progress
For optimal display change
resolution to 1920 x 1080
[When XGA Mode is active and
1920 x 1080 is selected]
Auto in progress
6
INPUT Button
INPUT →◄ ► → AUTO/SET
- Toggles between inputs
V
A
Component
RGB
HDMI/DVI
SuperSign
Composite Video
HDTV, DVD
15-pin D-Sub analog signal
Digital signal
SuperSign
Input List
AV
7
IR Receiver
Component
RGB
HDMI/DVI
SuperSign
This is where the unit receives signals from the remote control.
22
User Menus
OSD Menu
Icon
Function Description
Adjusts screen brightness, contrast and color that you prefer.
Picture
Adjusts the audio options.
Audio
Adjusts the timer options.
Time
Adjusts the screen status according to the circumstances.
Option
Adjusts the tile options.
Tile
Adjusts the USB options.
USB
Note
OSD(On Screen Display)
• The OSD function enables you to adjust the screen status conveniently since it
provides graphical presentation.
23
User Menus
How to adjust the OSD (On Screen Display) screen
MENU
➩
➩
Move where
you want to
adjust
Pops up
the menu
screen
➩
Select a
menu icon
➩
➩
Select a
menu list
Move where
you want to
adjust
➩
Adjust the status
➩
Save
adjustment
Exit from the
menu screen.
• Use the remote control to adjust the OSD screen.
1
Press the MENU Button, then the main menu of the OSD appears.
2
To access a control, use the
3
When the icon you want becomes highlighted, press the OK Button.
4
To access a control, use the
5
When the list you want becomes highlighted, press the OK Button.
6
Use the
7
Accept the changes by pressing the OK Button.
8
Exit the OSD by pressing the EXIT Button.
Buttons.
Buttons.
Buttons to adjust the item to the desired level.
How to adjust the screen automatically
Press the AUTO/SET button (AUTO button on a remote Control)
in the PC analog signal. Then optimal screen settings will be
selected that fit into the current mode. If adjustment is not
satisfactory, you can adjust the screen manually.
< M3204C >
< M4716C >
[When XGA mode is active and
1360 x 768 is selected.]
[When XGA mode is active and
1920 x 1080 is selected.]
Auto in progress
Auto in progress
24
User Menus
Adjusting Screen Color
Aspect Ratio
PICTURE
Move
Aspect
16:9
AspectRatio
Ratio :: 16:9
Energy Saving : Off
Picture Mode : Standard
• Backlight 70
• Contrast • Brightness 50
• Sharpness 70
• Color
90
OK
16:9
16:9 Just scan
Original
4:3
14:9
Zoom
Cinena Zoom 1
Full Wide
60
▼
To select the image size of the screen.
16:9 : Widescreen mode.
Just Scan : A
llows you to enjoy the transmitted data fully without any images cut off.
(*This menu is activated only in 720p,1080p,1080i (HDMI/DVI-DTV, Component mode)
Original : T
he aspect ratio is not adjusted from the original. It is set by the program being watched.
4:3 : This picture format is 4:3 aspect ratio.
1:1 : The aspect ratio is not adjusted from the original. Used in PC mode.
(Only HDMI/ DVI PC, RGB PC)
14:9 : 14:9
programs are viewed normally in 14:9 with black bars added to the top and bottom.
4:3 programs are magnified on the top/bottom and left/right sides.
Zoom : 4:3 programs are magnified until they fill the 16:9 screen. The top and bottom will be cut off.
Cinena Zoom 1 : C
hoose Cinema Zoom when you wish the picture to be altered, both horizontally
extended and vertically cropped. The picture adopting a compromise between
alteration and screen coverage.
Full Wide : W
hen TV receives the wide screen signal,it will lead you to adjust the picture
horizontally or vertically, in a linear proportion,to fill the entire screen fully.
H - 80
ENG
ARC
MODE
AV
Component
AV
Component
RGB
HDMI / DVI
RGB
HDMI / DVI
SuperSign
16 : 9
Just Scan
Original
4:3
1:1
14 : 9
Zoom
Cinema Zoom 1
Full Wide
KOR
ᬱᅙ⪵໕እ
ᯱ࠺⪵໕እ
ᵭ
SuperSign
25
User Menus
Adjusting Screen Color
Energy Saving
PICTURE
Aspect Ratio Move
OK
: 16:9
Off
Off
ꕫ Energy
Energy Saving
Saving :: Off
Off
Level 1
Picture Mode : Standard
• Backlight 70
• Contrast • Brightness 50
• Sharpness 70
• Color
90
Level 2
Level 3
60
▼
This screen brightness adjusting menu helps you save energy.
Level : Total 4 screen brightness levels are provided.
- Off: 100% light
- Level 1: 80% light
- Level 2: 60% light
- Level 3: 40% light
Note
• If the 'Picture Mode' is set to 'Cinema', the 'Energy saving' mode is disabled.
26
User Menus
Adjusting Screen Color
Picture Mode
PICTURE
Aspect Ratio Move
OK
: 16:9
Energy Saving : Off
Vivid
Picture
PictureMode
Mode Standard
:: Standard
• Backlight 70
Standard
Standard • Contrast Sport
• Brightness 50
Game
• Sharpness 70
Expert 1
• Color
Expert 2
90
60
Cinema
▼
Toggles between screen presets.
Standard : The most general and natural screen display status.
Vivid : Select this option to display with a sharp image.
Cinema : Select this option to lower brightness by one level.
Sport : Select this option to display with a soft image.
Game : To enjoy dynamic image when playing a game.
Expert1,2 : Select this option to use the user-defined settings.
Note
• If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema,
Sport or Game the subsequent menus will be automatically set.
27
User Menus
Adjusting Screen Color
Picture Mode
PICTURE
Aspect Ratio Move
OK
: 16:9
Energy Saving : Off
Picture Mode : Standard (User)
Backlight 70
70
•• Backlight
• Contrast
• Brightness 50
• Sharpness 70
• Color
90
60
▼
Backlight : To control the brightness of the screen,adjust the brightness of LCD panel.
Contrast : Adjust the difference between the light and dark levels in the picture.
Brightness : To adjust the brightness of the screen.
Sharpness : To adjust the clearness of the screen.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Color : To adjust the color to desired level.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Tint :To adjust the tint to desired level.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
28
User Menus
Adjusting Screen Color
Advanced Control
PICTURE
Move
OK
• Contrast • Brightness 50
• Tint • Advanced Control
• Picture Reset
Screen
90
Color Temperature
◄ Medium ►
• Sharpness 70
Dynamic Contrast
High
• Color Dynamic Color
60
0
High
Noise Reduction
Medium
Gamma
Medium
Black Level
High
Film Mode
Off
Close
Color Temperature : Color Settings
Cool : Slightly purplish white.
Medium : Slightly bluish white.
Warm : Slightly reddish white.
Dynamic Contrast : Optimizes the contrast automatically according to the brightness of the reflection.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Dynamic Color : Adjusts the Color of the reflection automatically to reproduce natural colurs as close as possible.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Noise Reduction : R
emoving the noise up to the point where it does not damage the original picture.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Gamma : Set your own gamma value.
O
n the monitor, high gamma values display whitish images and low gamma
values display high contrast images.
Black Level : ( Function works in the following mode - AV, Component, HDMI-DTV) adjusts the contrast
and the brightness of the screen using the black level of the screen.
Low : The reflection of the screen gets darker.
High : The reflection of the screen gets brighter.
Film Mode : (Function works in the following mode - AV, Component 480i/576i/1080i, HDMI/DTV
480i/576i/1080i) When you watch a movie, this function adjusts the set to the best picture
appearance.
White Balance : This is the function to adjust the overall colour of the screen to the feeling you want. (
Function works in the following mode - Expert 1, Expert 2 Picture mode)
Color Management System : As the tool used by the experts to make adjustments by using the
test patterns, this does not affect other colours but can be used to
selectively adjust the 6 colour areas (Red/Green/Blue/Cyan/
Magenta/Yellow). Colour difference may not be distinctive even
when you make the adjustments for the general video.(Function
works in the following mode - Expert 1, Expert 2 Picture mode)
29
User Menus
Adjusting Screen Color
Picture Reset
PICTURE
Move
OK
• Contrast • Brightness 50
• Sharpness 70
• Color • Tint • Advanced Control
• Picture Reset
Return Picture Mode to the default factory
settings.
90
60
0
Screen
Screen
PICTURE
Move
OK
• Contrast • Brightness 50
• Sharpness 70
SCREEN
• Color 60
Resolution ►
• Tint 0
• Advanced Control
Auto Config.
• Picture Reset
Screen
Screen
90
Move
Prev.
1024
768
1360 xx 768
1280 x 768
1360 x 768
1366 x 768
Position
Size
Phase
Reset
Adjust the screen video.
Resolution : To view a normal picture, match the resolution of RGB mode and selection of PC
mode. This function works in the following mode: RGB[PC] mode.
Auto Config. (RGB PC input only) : This button is for the automatic adjustment of the screen
position, clock and phase. This function is available for analog signals only.
Position : Moving the screen position.
Size : Adjust the size of the screen.
Phase : T
o adjust the focus of the display. This item allows you to remove any horizontal noise
and clear or sharpen the image of characters. This function is available for analog signals only.
Reset : Return Manual config. to the default factory settings.
30
User Menus
Adjusting the audio function
AUDIO
Move
Auto
Auto Volume
Volume Off
:: Off
Clear Voice II : Off
• Level Balance AUDIO
OK
3
: Standard
• Treble 50
• Bass 50
Clear Voice II : Off
• Level OK
3
Balance 0
Sound Mode Move
0
Sound Mode : Standard
• Treble 50
• Bass 50
Speaker : On
• Reset
• Reset
▼
Auto Volume
To adjust uneven sound volumes across all channels or signals automatically to the most
appropriate level. To use this feature, select On.
Clear Voice II
By differentiating the human sound range from others,it helps users listen to human voices better.
Balance
Use this function to balance sound from the left and right speakers.
Sound Mode
The best sound tone quality will be selected automatically depending on the video type that you're
currently watching.
Standard : The most commanding and natural audio.
Music : Select this option to enjoy the original sound when listening to the music.
Cinema : Select this option to enjoy sublime sound.
Sport : Select this option to watch sports broadcasting.
Game : To enjoy dynamic sound when playing a game.
Speaker
You can adjust internal speaker status.
If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
31
User Menus
Adjusting the timer function
TIME
Move
Clock Clock
OK
: −− : −− −−−−
Off Time : Off
On Time : Off
Sleep Timer : Off
Auto Off
: On
Power On Delay : Off
Clock
If the current time is incorrect, reset the clock manually.
1) Press the MENU button and then use
button to select the Time menu,input OK button to enter.
2) Press the button and then use
button to select clock menu.
3) Press the button and then use
button to select date
4) Press the
button and then use
button to set the hour(00h to 23h).
5) Press the
button and then use
button to set the minutes(00 min to 59 min).
On/Off time
The off time automatically switches the set to standby at the pre-set time.
1) Press the MENU button and then use
button to select the Time menu,input OK button to enter.
2) Press the button and then use
button to select On/Off Timer.
3) Press the button and then use
button to select date
4) Press the
button and then use
button to set the hour(00h to 23h).
5) Press the
button and then use
button to set the minutes(00 min to 59 min).
6) Press the
button ,According to the personal needs, choose to add button.
Sleep timer
The power is automatically turned off when the time set by a user is passed.
1) Press the MENU button and then use
button to select the Time menu,input OK button to enter
2) Press the button and then use
button to select Sleep timer menu.
3) Press the
button and then use
button to select the minutes(Off to 240 min).
Auto off
If Auto off is active and there is no input signal, the set switches to off mode automatically after 10 minutes.
1) Press the MENU button and then use
button to select the Timer menu, input OK button to enter.
2) Press the button and then use
button to select the Auto off menu.
3) Press the button and then use
button to select On or Off.
Power on delay
When connecting multiple monitors and turning the power on, the monitors are turned on individually to
prevent overload.
Note
• In the event of power interruption (disconnection or power failure), the clock must be reset.
• Once the on or off time is set, these functions operate daily at the preset time.
• The scheduled power-off function works properly only when the device time is set correctly.
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time if the set is turned on, and vice versa if the set is turned off.
• When On time is operated, input screen is turned on as it was turned off.
32
User Menus
Selecting the options
OPTION
Language
Language
Input Label
Move
OK
English
::English
Key Lock : Off
Set ID
: Off
ISM Method : Normal
DPM Select
: On
Power Indicator : ­ON
Interface Select
: RS232C
▼
Language
To choose the language in which the control names are displayed.
Input Label
Selects a label for each input source. For example, when connecting to PC in RGB mode,
* Select "PC" for the connecting device field. Otherwise, the screen may not display properly.
Key Lock
Use the
buttons to select On or Off. The monitor can be set up so that it can only be
used with the remote control. This feature can prevent unauthorized viewing.
In order to lock the OSD screen adjustment, set the Key Lock tab to the 'On' position.
In order to unlock it, do the following :
Push the MENU button on the remote control and set Key Lock to the 'Off' position.
Set ID
You can assign a unique Set ID NO (name assignment) to each product when several products
are connected for display. Specify the number (1 to 99) using the
button and exit. Use the
assigned Set ID to individually control each product using the Product Control Program.
ISM Method
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause
image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize the
residual image prevention function on the product, and when the product is not used, turn off the
power. Burn-in and related problems are not covered by the warranty on this product.
Normal : Leave on normal if you don't foresee image burn in being a problem.
Orbiter : M
ay help prevent ghost images. However, it is best not to allow any fixed image to remain
on the screen. To avoid a permanent image on the screen, the screen will move every 2
minutes.
Inversion : T
his function inverts the panel color of the screen. The panel color is automatically
inverted every 30 minutes.
White wash : W
hite wash fills the screen with solid white. This helps removes permanent
images burned into the screen. A permanent image may be impossible to clear
entirely with white wash.
33
User Menus
Selecting the options
< M3204C >
< M4716C >
OPTION
Move
OPTION
OK
▲
Move
▲
ISM Method : Normal
ISM Method : Normal
DPM Select
Power Indicator : On
: ­ON
DPM Select
Power Indicator : On
: ­ON
Interface Select
: RS232C
Interface Select
: RS232C
Network Setup
Network Setup
Information
Information
Factory Reset
Logo Light
OK
Factory Reset
: ­ON
DPM Select
A user can choose to turn the power saving mode on / off.
Power Indicator
Use this function to set the power indicator on the front side of the product to On or Off. If you set Off, i will
go Off. If you set On at any time, the power indicator will automatically be turned on.
Interface Select
Sets up network connections.
- Network : LAN - Enables communication via Ethernet.
- RS-232C : Enables communication via Serial.
Network Setup
- DHCP : Allocates and sets up IP automatically.
- Manual : Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS.
The setup process is complete when you select Execute, and "IP Setup
Completed" is displayed at the bottom of the screen. While "Wait for IP Setup"
is displayed, you cannot use the local keys and remote control. "Wait for IP
Setup" is displayed for up to 40 seconds.
*If Interface select is set to RS232C.DHCP and Manual are disabled.
Information
You can find informations about Serial No, F/W version, IP Address and MAC Address.
Factory Reset
Select this option to return to the default factory settings.
Logo Light (Only M3204C)
Use this function to reset the Logo Display Lamp On the front side of the product to On or Off. If you
set On, the lamp will automatically be turned on.
* The function may be disabled depending of the product. See the table below.
Product color
Logo Light
Black
x
Silver
o
White
o
34
User Menus
Adjusts the tile options.
Tile Mode
TILE
Move
Tile Mode
: 2x2
Off
Tile ID :0
Natural Mode
: Off
H Size
:0
V Size
:0
H Position : ­0
V Position
: ­0
OK
- Must be displayed with various other
products.
- Must be in a function that can be connected
to RS-232C or RGB Out.
- It is used to enlarge the screen and also used
with several products to view screen.
Reset
Tile mode and choose Tile alignment and set the ID of the current product to set location.
Only after pressing the SET button the adjustments made to the settings will be saved.
- Tile mode : column x row ( c = 1, 2, 3, 4, 5 r = 1, 2, 3, 4, 5 )
- 5 x 5 available.
- Configuration of an integration screen is also available as well as configuration of One by one Display.
- Tile mode (product 1 ~ 4) : c(2) x r(2)
column
ID 2
ID1
row
ID 3
ID4
35
User Menus
Adjusts the tile options.
- Tile mode (product 1 ~ 9) : c(3) x r(3)
column
ID 3
ID1
ID2
ID4
ID5
ID6
ID7
ID8
ID9
row
- Tile mode (product 1 ~ 2) : c(2) x r(1)
column
ID2
ID1
row
- Tile mode (product 1 ~16) : c(4) x r(4)
column
ID 1
ID 2
ID 3
ID 4
ID 5
ID 6
ID 7
ID 8
ID 9
ID10
ID 11
ID 12
ID 13
ID 14
ID 15
ID 16
row
Tile ID : Select the location of the Tile by setting an ID.
Natural : T
he image is omitted by the distance between the screens to be naturally shown.
H-Size : A
djust the horizontal size of the screen taking into account the size of the bezel.
V-Size : Adjust the vertical size of the screen taking into account the size of the bezel.
H-Position : Moving the screen position horizontally.
V-Position : Moving the screen position vertically.
Reset : Function to initialize and release Tile.
All Tile setting are released when selecting Tile recall and the screen returns to Full screen.
36
User Menus
Adjusts the USB options.
When connecting the USB device
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list
is activated.
When the Pop Up menu appears, you can select Music List, Photo List or Movie List in the
MY MEDIA menu.
In USB device, you can not add a new folder or delete the existing folder.
1.
Connect the USB device to the USB jack on the product.
USB 메모리 스틱
2.
Select PHOTO LIST, MUSIC LIST or MOVIE LIST.
PHOTO LIST
MUSIC LIST
MOVIE LIST
37
User Menus
Adjusts the USB options.
Precautions when using the USB device
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Only a USB storage device is recognizable.
If the USB storage device is connected through a USB hub, the device is not recognizable.
A USB storage device using an automatic recognition programme may not be recognized.
A USB storage device which uses its own driver may not be recognized.
The recognition speed of a USB storage device may depend on each device.
Please do not turn off the TV or unplug the USB device when the connected USB storage device
is working. When such device is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
Please do not connect the USB storage device which was artificially maneuvered on the PC. The
device may cause the product to malfunction or fail to be played. Never forget to use only a USB
storage device which has normal music files or image files.
Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system
provided with the Windows operating system. In case of a storage device formatted as a different
utility programme which is not supported by Windows, it may not be recognized. Data in a USB
storage device cannot be deleted in the NTFS file system.
Please connect power to a USB storage device which requires an external power supply. If not,
the device may not be recognized.
Please connect a USB storage device with cable is offered by USB maker. If connected with cable
is not offered by USB maker or an excessively long cable, the device may not be recognized.
Some USB storage devices may not be supported or operated smoothly.
Maximum of 999 files and folders can be recognized.
Data in a USB storage device cannot be aligned. Up to 128 English characters can be recognized
as a file name.
Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the
TV is turned on.
The recommended capacity is 1TB or less for a USB external hard disk and 32GB or less for USB
memory.
Any device with more than the recommended capacity may not work properly.
If a USB external hard disk with a “Power Saving” function does not work, turn the hard disk off
and on again to make it work properly.
Names and subtitles of some language files may not display properly.(Korean, Chinese, Japanese)
When using Korean, Japanese or Chinese subtitles or file names, it is recommended to set the
language to the corresponding one.
38
User Menus
Adjusts the USB options.
Photo List
You can view photo files on USB storage device.
The On Screen Display may be different from your product. Images are an example to assist with the
product operation.
PHOTO(*.JPEG) supporting file
Baseline: 15360 x 8640
Progressive : 1024 x 768
• You can play JPEG files only.
• Non-supported files are displayed in the form of bitmap.
Screen Components
Photo List
2
Page 2/3
Drive1
JMJ001
Up Folder
Navigation
USB Device
No Marked
Free Space 150 MB
Up Folder
1366x768, 125KB
1
4
3
KY103
02/12/2010
KY101
02/12/2010
KY104
02/12/2010
KY102
02/12/2010
KY105
02/12/2010
JMJ001
02/12/2010
JMJ005
02/12/2010
JMJ002
02/12/2010
JMJ006
02/12/2010
JMJ003
02/12/2010
JMJ007
02/12/2010
JMJ004
02/12/2010
JMJ008
02/12/2010
Option
5
Page Change
1
Moves to upper level folder
2
Current page / Total pages
3
Total number of marked photos
4
Usable USB memory
5
Corresponding buttons on the remote control
MARK
39
Mark
EXIT
Exit
User Menus
Adjusts the USB options.
Photo Selection and PopUp Menu
USB Device
Photo List
Page 2/3
Drive1
JMJ001
1366x768, 125KB
Up Folder
Navigation
No Marked
Free Space 150 MB
Up Folder
KY103
02/12/2010
02/12/2010
KY101
02/12/2010
KY104
KY102
02/12/2010
KY105
02/12/2010
JMJ001
02/12/2010
JMJ005
02/12/2010
JMJ002
02/12/2010
JMJ006
02/12/2010
JMJ003
02/12/2010
JMJ007
02/12/2010
JMJ004
02/12/2010
JMJ008
02/12/2010
Option
Page Change
MARK
Mark
EXIT
Exit
➩
View : Display the selected item.
Mark All : Mark all photos on the screen.
Unmark All : Deselect all marked photos.
Delete : Delete the selected photo item.
Close : Close the pop-up menu.
USB Device
Photo List
Page 2/3
Drive1
JMJ001
Free Space 150 MB
Up Folder
1366x768, 125KB
Up Folder
Navigation
No Marked
Option
KY103
02/12/2010
KY104
02/12/2010
KY101
02/12/2010
KY102
JMJ001
02/12/2010
KY105
1366x768, 125KB
02/12/2010
JMJ005
02/12/2010
JMJ002
02/12/2010
JMJ006
02/12/2010
JMJ003
02/12/2010
JMJ007
02/12/2010
JMJ004
02/12/2010
JMJ008
View
Mark All
Delete
Close
Page Change
MARK
Mark
02/12/2010
02/12/2010
EXIT
Exit
40
User Menus
Adjusts the USB options.
How to view photo
Detailed operations are available on full-sized photo view screen.
The aspect ratio of a photo may change the
size of the photo displayed on the screen in
full size. Press the EXIT button to move to
the previous menu screen.
◄
Slideshow ◘
BGM ◘
1/17
꘤
►
Delete
Option
Hide
►► Slideshow When no picture is selected, all photos in the current folder are displayed during slide show. If some
photos are selected, those photos are displayed in a slide show.
• Set the time interval of the slide show in Option.
►► BGM (Background Music)
Listen to music while viewing photos in full size.
• Set the Music Folder for BGM in Options before using this function.
►► ꘤ (Rotate)
• Rotate photos. Rotates the photo 90°, 180°, 270°, 360° clockwise.
►► Delete
Delete photos.
►► Option
Set values for Sl ide Speed and Music Folder for BGM.
• Use
< > button and OK button to set values. Press OK to save the settings.
• You cannot change Music Folder while BGM is playing.
►► Hide
Hide the menu on the full-sized screen. To see the menu again on the full-sized screen, press OK
button to display.
41
User Menus
Adjusts the USB options.
Music List
You can play music files on USB storage device.
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may
not be supported by this model. Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with
the TV operation.
MUSIC (*.MP3) supporting file
Bit rate 32 to 320kbps
• Sampling rate MPEG1 layer 3: 32 kHz, 44.1 kHz, 48 kHz.
Screen Components
Music List
2
Page 2/3
Music
S003
Up Folder
Navigation
USB Device
No Marked
Free Space 150 MB
Title
00:00/01:34
1
4
3
Duration
Up Folder
Up Folder
S001
03:33
S002
04:45
S003
01:30
S004
02:37
S005
01:58
Option
5
Page Change
1
Moves to upper level folder
2
Current page / Total pages
3
Total number of marked music title
4
Usable USB memory
5
Corresponding buttons on the remote control
MARK
42
Mark
EXIT
Exit
User Menus
Adjusts the USB options.
Music Selection and PopUp Menu
As shown, up to 6 music titles are listed per page.
Play (During stop) : Play the selected
music titles.
One playback of a piece of music finishes,
the next selected one will be played. When
there are no selected music titles to play,
the next one in the current folder will be
played. If you go to a different folder and
press the OK button, the current music in
playback will stop.
Play Marked: Play the selected music
titles. Once a music finishes playing, the
next selected one will be played
automatically.
Stop Play (During playback): Stop the
playing music titles.
Play with Photo: Start playing the
selected music titles and then move to the
Photo List.
Mark All : Mark all music titles in the folder.
Unmark All : Deselect all marked music
titles.
Delete : Delete the selected music titles.
Close : Close the pop-up menu.
USB Device
Music List
Page 2/3
00:00/01:34
Free Space 150 MB
Duration
Up Folder
Up Folder
S001
03:33
S002
04:45
S003
01:30
S004
02:37
S005
Up Folder
Navigation
No Marked
Title
Music
S003
Option
01:58
Page Change
Mark
MARK
EXIT
Exit
➩
USB Device
Music List
Page 2/3
Free Space 150 MB
Up Folder
S001
S002
S003
00:00/01:34
S004
S005
Up Folder
Navigation
No Marked
Title
Music
S003
Option
Duration
4395KB 1Kbps
Play
Play with Photo
Mark All
Delete
Close
Page Change
MARK
Mark
Up Folder
03:33
04:45
01:30
02:37
01:58
EXIT
Exit
43
User Menus
Adjusts the USB options.
If you don't press any button for a while during the playing, the play information box (as shown in the below)
will float as a screen saver.
The ‘Screen Saver’?
S
creen saver is to prevent screen pixel damage due to an fixed image remaining on the screen
for a extended period of time.
Music
S003
0:27 / 3:67
Note
• A damaged or corrupted music does not play but displays 00:00 in playtime.
• A music downloaded from a paid service with copyright protection does not start but
displays inappropriate information in playtime.
• If you press OK, ■ buttons, screen saver is stopped.
• The PLAY(►), Pause(II), ■ , ►►, ◄◄ buttons on the remote control are also available in this mode.
• You can use the ►► button to select the next music and the ◄◄ button to select
the previous music.
44
User Menus
Adjusts the USB options.
Movie List
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Video editing is not supported but files can be deleted.
It is a movie list that displays folder information and DivX file.
Supports up to four drives.
MOVIE(*.avi/*.DivX) supporting file
Video format : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG 4-V2, V3), DivX 3.xx, DivX
4.xx, DivX 5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital
Sampling frequency : within 32k to 48 khz
Bit rate : 32k to 320 kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• DivX may not be played depending on its types or recording methods.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or 30
FPS (720*480) depending on Resolution.
• Max bitrate of playable DivX is 4Mbps.
• Files more than 25 FPS or 30 FPS or higher may not be played properly.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• Playing a video via a USB connection that doesn’t support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list.
• Files encoded with GMC(Global Motion Compensation) may not be played.
Extension
name
Video Decoder
Audio Codec
mpg, mpeg,
vob, dat
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
720x576@25p
MPEG4-SP, MPEG4-ASP, DivX3.xx,
Avi, DivX, m4v
Max Resolution
DivX4.xx, DivX5.xx
AC3,MPEG,MP3,PCM
DivX6.xx(Playback), XviD
45
720x480@30p
User Menus
Adjusts the USB options.
Screen Components
2
Movie List
Page 2/3
Movie
M002
4
3
USB Device
No Marked
Free Space 150 MB
Title
Duration
Up Folder
Favorite Music
M001
640x480, 720KB
1
Up Folder
Navigation
M002
01:34:15
M001
01:35:30
M001
01:30:20
Option
5
Page Change
1
Moves to upper level folder
2
Current page / Total pages
3
Total number of marked movie title
4
Usable USB memory
5
Corresponding buttons on the remote control
Note
MARK
Mark
EXIT
Exit
• Use the left/right (< / >) keys to move to a specific frame forward or backward while
playing a movie. (The left/right (< / >) keys may not work properly for some files while
playing a movie.)
46
User Menus
Adjusts the USB options.
Movie Selection and PopUp Menu
USB Device
Movie List
Page 2/3
No Marked
Free Space 150 MB
Title
Movie
M002
Duration
Up Folder
Favorite Music
M001
640x480, 720KB
01:34:15
M001
01:35:30
01:30:20
M001
Up Folder
Navigation
M002
Option
Page Change
MARK
Mark
EXIT
Exit
➩
Page 2/3
No Marked
Free Space 150 MB
Title
Movie
M002
Duration
Up Folder
640x480, 720KB
1366x768, 125KB
Favorite Music
Play
M001
Mark All
M002
Delete
01:34:15
M001
Close
01:35:30
Mark
EXIT
01:30:20
M001
Up Folder
Navigation
Play: Plays the selected movie. DivXplay is
executed while the screen changes.
Mark All: Marks all movies in the folder.
Unmark All : Deselect all marked movies.
Delete: Deletes the selected movie.
Close: Closes the pop-up menu.
USB Device
Movie List
Option
Page Change
MARK
Exit
Using the remote control
◄◄ / ►►
When playing, repeatedly, press REW (◄◄) to speed up ◄◄(x2) -> ◄◄◄ (x4) -> ◄◄◄◄(x8) ->
◄◄◄◄◄(x16) ->◄◄◄◄◄◄(x32). Repeatedly, press FF (►►) to speed up ►►(x2)-> ►►► (x4) ->
►►►► (x8) -> ►►►►►(x16) -> ►►►►►►(x32). Pressing these buttons repeatedly increases the
fast forward/reverse speed.
II
During playback, press Pause (II) and the still screen is displayed.
■
During playback, stops the screen.
►
Press Play(►) to return to normal playback.
Note
• In the case of files not supported, a message regarding non-supported file is displayed.
47
User Menus
Adjusts the USB options.
When you select the Set Video Play,
Picture Size
◀
Subtitle Language
1/6
Audio Language
1/6
Subtitle File
Off
● Language
Latin 1
● Sync
+0.5
● Position
Option
Full Screen ▶
15
OK
Picture Size : Sets to [Full Screen] or [Original Size].
Subtitle Language : Allows to select the language you want for the file with multiple
subtitle tracks.
This option is not available if the file has only one subtitle track.
Audio Language : Allows to select the language you want for the file with multiple audio
tracks.
This option is not available if the file has only one audio track.
Subtitle File : Sets to On or Off.
Language : Sets to one of Latin1, Latin2, Latin4, Latin5, Cyrillic, Greek, Hebrew,
Chinese, Japanese and Korean.
Sync : Adjusts the subtitle delay from 0 and +5.0 in 0.5 second increments.
Position : Moves the subtitle position from 0 to 16.
* You can move the video back or forward by clicking < or > key.
48
User Menus
Adjusts the USB options.
DivX Registration Code
USB
Move
OK
Photo List
Music List
Movie List
DivX
DivXReg.
Reg.Code
Code
Deactivation
DivX(R) Video On Demand
ꔉ
Your registration Code is: xxxxxxxxxx
To learn more visit www.divx.com/vod.
Close
Confirm the DivX registration code number of the TV. Using the registration number, movies
can be rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not
allowed. (Only DivX files matched with the registration code of the purchased TV are
playable.)
ABOUT DivX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an
official DivX Certified device that plays DivX video. Visit www.divx.com for more
information and software tools to convert your files into DivX video.
ABOUT DivX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play DivX Video-on-Demand (VOD) content. To generate the registration code,
locate the DivX VOD section in the device setup menu. Go to vod.DivX.com with this
code to complete the registration process and learn more about DivX VOD.
“DivX Certified to play DivX video, including premium content”
“Pat. 7,295,673; 7,460,668; 7,515,710; 7,519,274”
Note
• Supported movie file
Resolution : under 25 frames/sec(720x576 WxH pixels).
Frame rate : under 30 frames/sec(720x480)
• Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3),
DivX3.xx, DivX4.xx, DivX5.xx, , DivX VOD(DRM), XviD, DivX6.xx(Playback).
• When loading, some buttons may not work.
49
User Menus
Adjusts the USB options.
Deactivation
USB
Move
OK
Photo List
Music List
Movie List
DivX Reg. Code
Deactivation
Deactivation
DivX(R)
Video On Demand
ꔉ
Do you want to deactivate your device?
Yes
No
➩
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code is: xxxxxxxx
To learn more visit www.divx.com/vod.
Close
The purpose of deactivation is to allow deactivation of devices for users who have activated
all the available devices through the web_server and are blocked from activating more
devices. DivX VOD allowed the consumer to activate up to 6 devices under one account,
but to replace or deactivate any of those devices, the consumer had to contact DivX
Support and request deletion. Now with this added feature, consumers will be able to
deactivate the device themselves and hence better manage their DivX VOD devices.
50
Troubleshooting
No image is displayed
● Is the power cord connected?
• See if the power cord is properly connected to
the outlet.
● Is the power indicator light on?
• See if the power switch is turned on.
• May need service.
<M3204C>
● Power is on, power indicator is Green
but the screen appears extremely dark.
<M4716C>
● Power is on, power indicator is Blue
but the screen appears extremely dark.
• Adjust brightness and contrast again.
• Backlight may need repair.
● Is the power indicator amber?
• If the set is in power saving mode, move the
mouse or press any key.
• Turn both devices off and then back on.
●D
oes the 'Out of range' message
appear?
• T
he signal from the PC (video card) is out of
the vertical or horizontal frequency range of the
set. Adjust the frequency range by referring to
the specifications in this manual.
* Maximum Resolution
RGB: 1600x1200 @ 60 Hz < M3204C >
1920x1080 @ 60 Hz < M4716C >
HDMI/DVI: 1920x1080 @ 60 Hz
●D
oes the 'Check signal cable'
message appear?
• T
he signal cable between PC and set is not
connected. Check the signal cable.
• Press INPUT on the remote control to check
the input signal.
'UnknownProduct'messageappearswhentheproductisconnected.
● Did you install the driver?
• Install the product driver, which is provided
with the product, or download it from the web
site. (http://www.lg.com)
• S
ee if the plug&play function is supported by
referring to the video card user manual.
'Key Lock On' message appears.
●T
he 'Key Lock On' message
appears when pressing the Menu
button.
• The control locking function prevents
unintentional OSD setting change due to
careless usage. To unlock the controls,
simultaneously press the Menu button and
►button for several seconds. (You cannot set
this function using the remote control buttons.
You can set this function in the product only.)
51
Troubleshooting
The screen image looks abnormal.
● Is the screen position wrong?
• D-Sub analog signal - Press the "AUTO" button
in the remote control to automatically select the
optimal screen status that fits into the current
mode. If adjustment is not satisfactory, use the
Position OSD menu.
• See if the video card resolution and frequency
are supported by the product. If the frequency
is out of range, set to the recommended
resolution in the Control Panel "Display"
Setting menu.
●D
o thin lines appear on the
background screen?
• D-Sub analog signal - Press the "AUTO"
button in the remote control to automatically
select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory,
use the Clock OSD menu.
●H
orizontal noise appears or the
characters look blurred.
• D-Sub analog signal - Press the "AUTO"
button in the remote control to automatically
select an optimal screen status that fits into the
current mode. If adjustment is not satisfactory,
use the Phase OSD menu.
● The screen is displayed abnormally.
• The proper input signal is not connected to the
signal port. Connect the signal cable that
matches with the source input signal.
After-image appears on the product.
●A
fter-image appears when the
product is turned off.
Note
• If you use a fixed image for a long time, the
pixels may be damaged quickly. Use the
screen-saver function.
• V
ertical frequency: To enable the user to watch the product display, screen image
should be changed tens of times every second like a fluorescent lamp. The vertical
frequency or refresh rate is the times of image display per second. The unit is Hz.
• Horizontal frequency: The horizontal interval is the time to display one vertical line.
When 1 is divided by the horizontal interval, the number of horizontal lines displayed
every second can be tabulated as the horizontal frequency. The unit is kHz.
52
Troubleshooting
The audio function does not work.
● No sound?
• See if the audio cable is connected properly.
• Adjust the volume.
• See if the sound is set properly.
● Sound is too dull.
• Select the appropriate equalize sound.
● Sound is too low.
• Adjust the volume.
Screen color is abnormal.
●S
creen has poor color resolution
(16 colors).
• Set the number of colors to more than 24 bits
(true color)
Select Control Panel - Display - Settings - Color
Table menu in Windows.
●S
creen color is unstable or monocolored.
• Check the connection status of the signal cable.
Or, re-insert the PC video card.
●D
o black spots appear on the screen?
• S
everal pixels (red, green, white or black color)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD panel. It is not a malfunction of the LCD.
The operation does not work normally.
● The power suddenly turned off.
• Is the sleep timer set?
• C
heck the power control settings.
Power interrupted.
• "CAUTION! FAN STOP!"
If the power is turned off after this message
appears, it means that the fan is out of order.
In this case, contact your local service center.
53
Specifications
< M3204C >
LCD Panel
80.0 cm (31.5 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 80.0 cm
0.51075 mm
Power
Rated Voltage
Power Consumption
Dimensions
& Weight
AC 100-240 V~ 50 / 60 Hz 1.6 A
On Mode
: 100 W Typ.
Sleep Mode : ≤ 1 W (RGB) / 2 W (HDMI/DVI)
(If LAN OFF is selected)
Off Mode
: ≤ 0.5 W
[2]
[1]
H
W
H
D
W
D
[4]
[3]
H
H
W
D
W
D
Width x Height x Depth
[1] 80.29 cm (31.61 inch) x 53.18 cm (20.93 inch) x 30.19 cm (11.88 inch)
[2] 80.29 cm (31.61 inch) x 49.30 cm (19.41 inch) x 9.98 cm (3.93 inch)
[3] 80.29 cm (31.61 inch) x 53.18 cm (20.93 inch) x 30.19 cm (11.88 inch)
[4] 80.29 cm (31.61 inch) x 49.30 cm (19.41 inch) x 9.98 cm (3.93 inch)
Net
[1] 14.02 kg (30.90 lb)
[3] 14.80 kg (32.62 lb)
Note
[2] 13.20 kg (29.10 lb)
[4] 13.98 kg (30.82 lb)
• The specifications shown above may be changed without prior notice for quality
improvement.
54
Specifications
< M4716C >
LCD Panel
119.28 cm (46.96 inch) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size : 119.28 cm
0.5415 mm x 0.5415 mm x RGB (Pixel Pitch)
Power
Rated Voltage
Power Consumption
Dimensions
& Weight
AC 100-240 V~ 50 / 60 Hz 3.3 A
On Mode
: 240 W Typ.
Sleep Mode : ≤ 1 W (RGB) / 2 W (HDMI/DVI)
(If LAN OFF is selected)
Off Mode
: ≤ 0.5 W
[1]
[2]
H
H
W
D
[3]
W
D
[4]
H
W
H
D
W
D
Width x Height x Depth
[1] 111.70 cm (44.0 inch) x 66.10cm (26.0 inch) x 11.87 cm (4.7 inch)
[2] 111.70 cm (44.0 inch) x 75.78cm (29.8 inch) x 30.26 cm (11.9 inch)
[3] 111.70 cm (44.0 inch) x 66.10cm (26.0 inch) x 11.87 cm (4.7 inch)
[4] 111.70 cm (44.0 inch) x 75.78cm (29.8 inch) x 30.26 cm (11.9 inch)
Net
[1] 26.42 kg (58.2 lb)
[3] 27.16 kg (59.9 lb)
Note
[2] 30.44 kg (67.1 lb)
[4] 31.18 kg (68.7 lb)
• The specifications shown above may be changed without prior notice for quality
improvement.
55
Specifications
Video Signal
Max. Resolution
RGB: 1600x1200 @ 60 Hz < M3204C >
1920x1080 @ 60 Hz < M4716C >
HDMI/DVI: 1
920x1080 @ 60 Hz
- It may not be supported depending on the OS or video card type.
Recommended Resolution RGB: WXGA 1360x768 @ 60 Hz < M3204C >
WXGA 1920x1080 @ 60 Hz < M4716C >
HDMI/DVI: WXGA 1360x768 @ 60 Hz < M3204C >
WXGA 1920x1080 @ 60 Hz < M4716C >
- It may not be supported depending on the OS or video card type.
Horizontal Frequency RGB: 30 kHz to 83 kHz
HDMI/DVI: 30 kHz to 83 kHz
Vertical Frequency
Input Connector
Environmental
Conditions
RGB: 56 Hz to 75 Hz
HDMI/DVI: 56 Hz to 60 Hz
Synchronization Type Composite/Separate/Digital
15-pin D-Sub type, HDMI/DVI(digital)
Composite Video, Component, RS-232C, LAN, USB
Operational Condition Temperature: 0 °C to 40 °C , Humidity: 10 % to 80 %
Storage Condition
Temperature: -20 °C to 60 °C , Humidity: 5 % to 95 %
Audio specification are applicable only for models that support speakers.
Audio
Note
RMS Audio Output
Input Sensitivity
Speaker Impedance
10 W + 10 W ( R + L )
0.7 Vrms
8Ω
• The specifications shown above may be changed without prior notice for quality
improvement.
56
Specifications
PC Mode - Preset Mode
Preset Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
832 x 624
1024 x 768
1024 x 768
1280 x 720
31.469
31.468
31.469
37.5
37.879
46.875
49.725
48.363
60.123
44.772
70.8
70.8
59.94
75
60.317
75
74.55
60
75.029
59.855
1
2
*3
4
*5
6
7
*8
9
*10
Preset Mode
*11
*12
*13
*14
15
*16
17
*18
1280 x 768
1360 x 768
1366 x 768
1280 x 1024
1280 x 1024
1680 x 1050
1600 x 1200
1920 x 1080
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
47.7
47.72
47.7
63.981
79.98
65.290
75.0
67.5
60
59.799
60
60.02
75.02
59.954
60
60
1 to 17: RGB mode
17: M3204C model only
*: HDMI/DVI mode
DTV Mode
< M3204C >
< M4716C >
Component
HDMI/DVI (DTV)
o
o
o
o
o
o
x
x
x
o
o
o
o
o
480i
576i
480p
576p
720p
1080i
1080p
Component
HDMI/DVI (DTV)
o
o
o
o
o
o
o
x
x
o
o
o
o
o
480i
576i
480p
576p
720p
1080i
1080p
Power Indicator
< M3204C >
< M4716C >
Mode
On Mode
Sleep Mode
Off Mode
Note
Mode
Set
Green
Amber
-
On Mode
Sleep Mode
Off Mode
Set
Blue
Amber
-
• DTV/PC selection on HDMI/DVI inputs is available for PC resolutions: 640x480/60
Hz, 1280x720/60 Hz, 1920x1080/60 Hz and DTV resolutions: 480p, 720p, 1080p.
57
RS-232C
Controlling the Multiple Product
Use this method to connect several products to a single PC. You can control several products at a
time by connecting them to a single PC.
If the [Set ID] menu in [Option] is set to OFF, the monitor ID value should be set between 1 and 99.
Connecting the cable
Connect the RS-232C cable as shown in the picture.
You need to purchase a cable to connect the RS-232C socket as it is not provided as the
accessory.
The RS-232C protocol is used for communication between the PC and product. You can
turn the product on/off, select an input source or adjust the OSD menu from your PC.
RS-232C Cable
(not included)
PC
monitor 1
monitor 3
monitor 2
monitor 4
RS-232C Configurations
3-Wire Configurations (Not Standard)
7-Wire Configurations (Standard RS-232C cable)
PC
RXD
TXD
GND
DTR
DSR
RTS
CTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
PC
Monitor
3
2
5
6
4
8
7
RXD
TXD
GND
DTR
DSR
RTS
CTS
TXDRXD
GND
DSR
DTR
CTS
RTS
2
3
5
4
6
7
8
D-Sub 9
(Female)
D-Sub 9
(Female)
Communication Parameter
► Baud Rate : 9600 buad Rate (UART)
► Data Length : 8 bit
► Parity Bit : None
► Stop Bit : 1bit
► Flow Control : None
► Communication Code : ASCII code
► Use a crossed (reverse) cable
A1
Monitor
3
2
5
6
4
7
8
D-Sub 9
(Female)
TXDRXD
GND
DTR
DSR
RTS
CTS
RS-232C
Controlling the Multiple Product
Command Reference List
COMMAND 1 COMMAND 2
01. Power
02. Input Select
03. Aspect Ratio
04. Screen Mute
05. Volume Mute
06. Volume Control
07. Contrast
08. Brightness
09. Color
10. Tint
11. Sharpness
12. OSD Select
13. Remote Lock/ key Lock 14. Balance
15. Color Temperature
16. Abnomal state
17. ISM mode
18. Auto configuration
19. Key
20. Tile Mode
21. Tile H Position
22. Tile V Position
23. Tile H Size
24. Tile V Size
25. Tile ID Set
26. Natural Mode (In Tile mode)
27. Picture mode(PSM)
28. Sound mode
29. Fan Fault check
30. Elapsed time return
31. Temperature value
32. Lamp fault check
33. Auto Volume
34. Speaker
35. Time
36. On Timer (On/Off Timer) Time
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
j
j
m
d
d
d
d
d
d
d
d
d
d
d
d
d
d
d
f
f
a
b
c
d
e
f
g
h
i
j
k
l
m
t
u
z
p
u
c
d
e
f
g
h
i
j x
y
w
l
n
p
u
v
a
d
37. Off Timer (On/zOff Timer) Time
f
e
A2
DATA1
00H to 01H
02H to 09H
01H to 1FH
00H to 01H
00H to 01H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 64H
00H to 01H
00H to 01H
00H to 64H
00H to 02H
FFH
01H to 08H
01H
Key Code
00H to 55H
00H to 14H
00H to 14H
00H to 64H
00H to 64H
00H to 19H
00H to 01H
00H to 06H
01H to 05H
FFH
FFH
FFH
FFH
00H to 01H
00H to 01H
00H to 06H
F1H to F4H
E0H to E4H
01H to 80H
F1H to F4H
E0H to E4H
01H to 80H
DATA2
DATA3
00H to 17H
00H to 17H
00H to 3BH
00H to 3BH
00H to 17H
00H to 3BH
RS-232C
Controlling the Multiple Product
COMMAND 1 COMMAND 2
DATA1
38. Scheduling input select
39. Sleep Time
40. Auto Sleep
41. Power On Delay
42. Language
43. DPM Select
44. Reset
45. Power Saving
46. Power Indicator
47. Logo Indicator (Only M3204C)
* The function may be disabled
depending of the product.
f
f
f
f
f
f
f
f
f
f
u
f
g
h
i
j
k
l
o
p
F1H
00H
00H
00H
00H
00H
00H
00H
00H
00H
48. Serial no.
49. S / W Version
50. Input Select
f
f
x
y
z
b
FFH
FFH
20H to A0H
A3
to
to
to
to
to
to
to
to
to
to
F4H
08H
01H
64H
09H
01H
02H
03H
01H
01H
DATA2
02H to 09H
DATA3
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
* [Command 1]: First command. (k, j, m, d, f, x)
* [Command 2]: Second command.(a to u)
* [Set ID]: Set up the Set ID number of product.
range : 01H to 63H. by setting '0', server can control all products.
* In case of operating with more than 2 sets using set ID as '0' at the same time, it should
not be checked the ack message. Because all sets will send the ack message, so it's
impossible the check the whole ack messages.
* [DATA]: To transmit command data.
Transmit 'FF' data to read status of command.
* [Cr]: Carriage Return
ASCII code '0 x 0 D'
* [ ]: ASCII code Space (0 x 20)
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
* The Product transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time, if the
data is data read mode, it indicates present status data.
If the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
* If there is error, it returns NG
A4
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
01. Power(Command : a)
► To control Power On / Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data 0 : Power Off
1 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
► To show the status of Power On / Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
Data 0 : Power Off
1 : Power On
02. Input Select (Command : b) (Main Picture Input)
► To select input source for the Set.
You can also select an input source using the INPUT
button on the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 2 : AV
4 : Component
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 2 : AV
4 : Component
7 : RGB (PC)
8 : HDMI (DTV)
9 : HDMI (PC)
A5
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
03. Aspect Ratio(Command : c) (Main picture format)
► To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 1 : Normal Screen (4 : 3)
2 : Wide Scran (16 : 9)
4 : Zoom (AV)
6 : Original (AV) 7 : 14 : 9 (AV)
9 : Just Scan (HD DTV) * When the RGB, HDMI / DVI PC mode(1:1)
10 to 1F : Cinema Zoom 1 to 16
B : Full Wide
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
04. Screen Mute(Command : d)
► To select screen mute on / off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0 : Screen mute off (Picture on)
1 : Screen mute on (Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
A6
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
05. Volume Mute(Command : e)
► To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0 : Volume Mute On (Volume Off)
1 : Volume Mute Off (Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0 : Volume Mute On (Volume Off)
1 : Volume Mute Off (Volume On)
06. Volume Control(Command : f)
► To adjust Volume
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
Acknowledgement
Data
[f][ ][Set ID][ ][OK][Data][x]
Min : 00H to Max : 64H
* Real Data Mapping
0 : STEP 0
:
A : STEP 10
:
F : STEP 15
10 : STEP 16
:
64 : STEP 100
A7
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
07. Contrast(Command : g)
► To adjust screen contrast.
You can also adjust the contrast in the Picture menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping' page A7.
08. Brightness(Command : h)
► To adjust screen brightness.
You can also adjust the brightness in the Picture menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping' as shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
* Refer to 'Real data mapping' page A7.
A8
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
09. Color(Command : i) (Video Timing only)
► To adjust the screen color.
You can also adjust the color in the Picture menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping' page A7.
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
10. Tint(Command : j) (Video Timing only)
► To adjust the screen tint.
You can also adjust the tint in the Picture menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red : 00H to Green: 64H
(Hexadecimal code)
* Refer to 'Real data mapping' page A7.
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red : 00H to Green : 64H
* Tint Real data mapping
0 : Step 0 to Red
:
64 : Step 100 to Green
A9
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
11. Sharpness(Command : k) (Video Timing only)
► To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
* Refer to 'Real data mapping' page A7.
Acknowledgement
Data
[k][ ][Set ID][ ][OK][Data][x]
Min : 00H to Max : 64H
12. OSD Select(Command : l)
► To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD Off
1 : OSD On
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD Off
1 : OSD On
13. Remote Lock /Key Lock (Command : m)
► To control Remote Lock on/off to the set.
This function, when controlling RS-232C, locks the remote control and the local keys.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Off
1 : On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Off
1 : On
A10
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
14 Balance(Command : t)
► To adjust the sound balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min : 00H to Max : 64H
(Hexadecimal code)
00H : Step L50
64H : Step R50
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
Min : 00H to Max : 64H
00H : Step 0 to L50
64H : Step 100 to R50
* Balance : L50 to R50
15. Color Temperature (Command : u)
► To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 0 : Medium
1 : Cool
2 : Warm
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
Data 0 : Medium
1 : Cool
2 : Warm
A11
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
16. Abnormal state (Command : z)
► Abnormal State : Used to Read the power off status when Stand-by mode.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Data FF : Read
Acknowledgement
[z][ ][Set ID][ ][OK][Data][x]
0 : Normal (Power on and signal exist)
1 : No signal (Power on)
2 : Turn the monitor off by remote control
3 : Turn the monitor off by sleep time function
4 : Turn the monitor off by RS-232C function
8 : Turn the monitor off by off time function
9 : Turn the monitor off by auto off function
17. ISM mode(Command: j p)
► Used to select the afterimage preventing function.
Transmission
[j][p][ ][Set ID][ ][Data][Cr]
Data 1H : Inversion
2H : Orbiter
4H : White Wash
8H : Normal
Acknowledgement
[p][ ][Set ID][ ][OK][Data][x]
A12
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
18. Auto Configure(Command: j u)
► To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data 1 : To set
Acknowledgement
[u][ ][Set ID][ ][OK][Data][x]
19. Key(Command : m c)
► To send IR remote key code.
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data Key code : Refer to page A 32.
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A13
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
20. Tile Mode(Command : d d)
► Change a Tile Mode.
Transmission
[d][d][ ][Set ID][ ][Data][x]
Data
00 or 11
12
13
14
...
55
Description
Tile mode is off.
1 x 2 mode(column x row)
1 x 3 mode
1 x 4 mode
...
5 x 5 mode
* The data can not be set to 0X or X0 except 00.
Acknowledgement
[d][ ][00][ ][OK/NG][Data][x]
A14
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
21. Tile H Position(Command : d e)
► To set the Horizontal position.
Transmission
[d][e][ ][Set ID][ ][Data][x]
Data
Min : 00H to Max : 14H
00H : Step -10(Left)
14H : Step 10(Right)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
22. Tile V Position(Command : d f)
► To set the Vertical position.
Transmission
Data
[d][f][ ][Set ID][ ][Data][x]
Min : 00H to Max : 14H
00H : Step -10(Down)
14H : Step 10(Up)
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
A15
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
23. Tile H Size(Command : d g)
► To set the Horizontal size.
Transmission
[d][g][ ][Set ID][ ][Data][x]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping' page A7.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
24. Tile V Size(Command : d h)
► To set the Vertical size.
Transmission
[d][h][ ][Set ID][ ][Data][x]
Data
Min : 00H to Max : 64H
* Refer to 'Real data mapping' page A7
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
A16
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
25. Tile ID Set(Command : d i)
► To assign the Tile ID for Tiling function .
Transmission
[d][i][ ][Set ID][ ][Data][x]
Data
Min : 00H to Max : 19H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK/NG][Data][x]
26 Natural Mode (In Tile mode) (Command : d j)
► To assign the Tile Natural mode for Tiling function .
Transmission
[d][j][ ][Set ID][ ][Data][x]
Data 0 : Natural Off
1 : Natural On
ff : Read Status
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
27. Picture Mode (Command : d x)
► To adjust the picture mode.
Transmission
[d][x][][Set ID][][Data][x]
Data Structure
Data(Hex)
00
01
02
03
04
05
06
MODE
Vivid
Standard
Cinema
Sport
Game
Export 1
Export 2
Acknowledgement
[x][][Set ID][][OK/NG][Data][x]
A17
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
28. Sound Mode (Command : d y )
► To adjust the Sound mode.
Transmission
[d][y][][Set ID][][Data][X]
Data Structure
Data(Hex)
01
02
03
04
05
Mode
Standard
Music
Cinema
sport
Game
Acknowledgement
[y][][Set ID][][OK/NG][Data][x]
29. Fan Fault check (Command : d w )
► To check the Fan fault of the TV.
Transmission
[d][w][][Set ID][][Data][x]
* The data is always FF(in Hex).
Data ff: Read Status
Acknowledgement
[w][][Set ID][][OK/NG][Data][x]
* Data is the status value of the Fan fault.
Data 0: Fan fault
1: Fan OK
2: N/A(Not Avaliable)
A18
RS-232C
Controlling
Controllingthe
theMultiple
MultipleProduct
Product
Transmission / Receiving Protocol
30. Elapsed time return(Command : d l)
► To read the elapsed time.
Transmission
[d][l][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[l][ ][Set ID][ ][OK/NG][Data][x]
* The data means used hours.
(Hexadecimal code)
31. Temperature value (Command : d n)
► To read the inside temperature value.
Transmission
[d][n][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[n][ ][Set ID][ ][OK/NG][Data][x]
* The data is 1 byte long in Hexadecimal.
32. Lamp fault Check(Command : d p)
► To check lamp fault.
Transmission
[d][p][ ][Set ID][ ][Data][x]
* The data is always FF(in Hex).
Acknowledgement
[p][ ][Set ID][ ][OK/NG][Data][x]
Data 0 : Lamp Fault
1 : Lamp OK
2 : N/A(DPM/Power Off)
A19
RS-232C
Controllingthe
theMultiple
MultipleProduct
Product
Controlling
Transmission / Receiving Protocol
33. Auto volume (Command : d u)
► Automatically adjust the volume level.
Transmission
[d][u][][Set ID][][Data][x]
Data 0 : Off
1 : On
Acknowledgement
[u][][Set ID][][OK/NG][Data][x]
34. Speaker (Command : d v)
► Turn the speaker on or off.
Transmission
[d][v][][Set ID][][Data][x]
Data 0 : Off
1 : On
Acknowledgement
[v][][Set ID][][OK/NG][Data][x]
A20
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
35. Time (Command : f a)
► Set the current time.
Transmission
[f][a][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
0 : Monday
1 : Tuesday
2 : Wednesday
3 : Thursday
4 : Friday
5 : Saturday
6 : Sunday
[Data2]
0H to 17H (Hours)
[Data3]
00H to 3BH (Minutes)
Acknowledgement
[a][][Set ID][][OK/NG][Data1][Data2][Data3][x]
*When reading data, FFH is inputted for [Data1], [Data2] and [Data3].
In other cases, all are treated as NG.
A21
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
36. On Timer (On/Off Timer) Time (Command : f d)
► Set On Timer.
Transmission
[f][d][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data1]
1. f1h to f4h(read one index)
f1: read 1st index of On Time List,
f2: read 2nd index of On Time List
f3: read 3rd index of On Time List
f4: read 4th index of On Time List
2. e1h~e4h(delete one index), e0h(delete all indexes)
e0: delete all indexes of On Time List
e1: delete 1st index of On Time List
e2: delete 2nd index of On Time List
e3: delete 3rd index of On Time List
e4: delete 4th index of On Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of [Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of On Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of On Time List
ex3: fd 01 3f 02 03 - when you write one On Time Data, "Monday to Saturday, 02:03"
Acknowledgement
[d][][Set ID][][OK][Data1][Data2][Data3][x]
A22
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
37. Off Timer (On/Off Timer) Time (Command : f e)
► Set Off Timer.
Transmission
[f][e][][Set ID][][Data1][][Data2][][Data3][Cr]
[Data 1]
1. f1h to f4h(read one index)
f1: read 1st index of Off Time List,
f2: read 2nd index of Off Time List
f3: read 3rd index of Off Time List
f4: read 4th index of Off Time List
2. e1h to e4h(delete one index), e0h(delete all indexes)
e0: delete all indexes of Off Time List
e1: delete 1st index of Off Time List
e2: delete 2nd index of Off Time List
e3: delete 3rd index of Off Time List
e4: delete 4th index of Off Time List
3. 01h to 80h (write) (Day of Week)
bit0 (01h) : Monday
bit1 (02h) : Tuesday
bit2 (04h) : Wednesday
bit3 (08h) : Thursday
bit4 (10h) : Friday
bit5 (20h) : Saturday
bit6 (40h) : Sunday
bit7 (80h) : Everyday
(1fh) : Monday to Friday
(3fh) : Monday to Saturday
(60h) : Saturday to Sunday
[Data 2]
00h to 17h (Hours)
[Data 3]
00h to 3bh (Minutes)
*When you read/delete the current on time list, all of [Data2][Data3] are have to be FFH.
(ex1: fd 01 f1 ff ff - when you read 1st index of Off Time List
ex2: fd 01 e1 ff ff - when you delete 1st index of Off Time List
ex3: fd 01 3f 02 03 - when you write one Off Time Data, "Monday to Saturday, 02:03")
Acknowledgement
[e][][Set ID][][OK][Data1][Data2][Data3][x]
A23
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
38. Scheduling Input select (Command : f u) (Main Picture Input)
► To select input source for TV depending on day.
Transmission
[f][u][][Set ID][][Data1][][Data2][Cr]
[Data 1]
1. f1h to f4h(write/read one index)
f1: read 1st index of On Time Input
f2: read 2nd index of On Time Input
f3: read 3rd index of On Time Input
f4: read 4th index of On Time Input
[Data 2]
Input
Data(Hex)
02
04
07
08
09
INPUT
AV
Component
RGB - PC
HDMI/DVI - HD-DVD
HDMI/DVI - PC
*When you read/delete the current On Time Input, [Data2] needs to be FFH.
(ex1: fu 01 f1 ff - when you read 1st index of On Time Input
ex2: fu 01 f3 02 - when you write one On Time Input Data in to 3rd index, "AV")
Acknowledgement
[u][][Set ID][][OK][Data1][Data2][x]
A24
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
39. Sleep Time (Command : f f)
► Set Sleep Time.
Transmission
[f][f][][Set ID][][Data][Cr]
Data
0 : Off
1 : 10
2 : 20
3 : 30
4 : 60
5 : 90
6 : 120
7 : 180
8 : 240
Acknowledgement
[f][][Set ID][][OK/NG][Data][x]
40. Auto Sleep (Command : f g)
► Set Auto Sleep.
Transmission
Data 0 : Off
1: On
[f][g][][Set ID][][Data][Cr]
Acknowledgement
[g][][Set ID][][OK/NG][Data][x]
A25
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
41. Power On Delay (Command : f h)
► Set the schedule delay when the power is turned on (Unit:
second).
Transmission
[f][h][][Set ID][][Data][Cr]
Data : 00H to 64H (Data value)
* Refer to 'Real data mapping' page A7
Acknowledgement
[h][][Set ID][][OK/NG][Data][x]
42. Language (Command : f i)
► Set the OSD language.
Transmission
[f][i][][Set ID][][Data][Cr]
Data
0 : English
1 : French
2 : German
3 : Spanish
4 : Italian
5 : Portuguese
6 : Chinese
7 : Japanese
8 : Korean
9 : Russian
Acknowledgemen
[i][][Set ID][][OK/NG][Data][x]
A26
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
43. DPM Select (Command : f j)
► Set the DPM (Display Power Management) function.
Transmission
[f][j][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[j][][Set ID][][OK/NG][Data][x]
44. Reset (Command : f k)
► Execute the Picture, Screen and Factory Reset functions.
Transmission
[f][k][][Set ID][][Data][Cr]
Data
0 : Picture Reset
1 : Screen Reset
2 : Factory Reset
Acknowledgement
[k][][Set ID][][OK/NG][Data][x]
A27
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
45. Power saving(Command : f I)
► To set the Power saving mode.
Transmission
[f][I][][Set ID][][Data][Cr]
Data 0 : Off
1: (static level 1)
2: (static level 2)
3: (static level 3)
Acknowledgement
[I][][Set ID][][OK/NG][Data][x]
46. Power Indicator (Command : f o)
► To set the LED for Power Indicator
Transmission
[f][o][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[o][][Set ID][][OK/NG][Data][x]
A28
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
47. logo Indicator (Command : f p) (Only M3204C)
► To set the LED for Power Indicator
Transmission
[f][p][][Set ID][][Data][Cr]
Data 0 : Off
1: On
Acknowledgement
[p][][Set ID][][OK/NG][Data][x]
* The function may be disabled depending of the product.
48. Serial no.Check (Command : f y)
► To read the serial numbers
Transmission
[f][y][][Set ID][][Data][Cr]
Data FF (to read the serial numbers)
Acknowledgement
[y][][Set ID][][OK/NG][Data1] ~ [Data13] [x]
* The data format is ASCII Code.
A29
RS-232C
Controlling the Multiple Product
Transmission / Receiving Protocol
49. S/W Version (Command : f z)
► Check the software version.
Transmission
[f][z][][Set ID][][Data][Cr]
Data FFH : Read
Acknowledgement
[z][][Set ID][][OK/NG][Data][x]
50. Input Select (Command : x b)
► To select input source for the Set.
Transmission
[x][b][][Set ID][][Data][Cr]
Data 20H : AV
40H : Component
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
Data 20H : AV
40H : Component
60H : RGB (PC)
90H : HDMI/DVI (DTV)
A0H : HDMI/DVI (PC)
A30
IR Codes
RS-232C
Remote Control IR Code
Output waveform
single pulse, modulated with 37.917kHz signal at 455kHz
Tc
Carrier frequency
FCAR = 1 / Tc = fosc / 12
Duty ratio = T1 / Tc = 1 / 3
T1
► Configuration of frame
▪ 1st frame
Lead
code
Low
custom code
High
custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
▪ Repeat frame
Repeat code
Tf
► Lead code
9 ms
4.5 ms
0.55ms
► Repeat code
9 ms
2.25 ms
► Bit description
▪ Bit "0"
▪ Bit "1"
0.56 ms
0.56 ms
1.12 ms
2.24 ms
► Frame interval : Tf
▪ The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf = 108 ms @ 455 kHz
A31
IR Codes
RS-232C
Code(Hex)
Function
40
41
06
07
08
C4
UP ( )
DOWN ( )
RIGHT ( )
LEFT ( )
POWER ON/OFF
MONITOR ON
C5
MONITOR OFF
09
95
0B
43
5B
4D
44
10
11
12
13
14
15
16
17
18
19
79
MUTE
Energy Saving
INPUT
MENU
EXIT
PSM
OK
Number Key 0
Number Key 1
Number Key 2
Number Key 3
Number Key 4
Number Key 5
Number Key 6
Number Key 7
Number Key 8
Number Key 9
ARC(MARK)
02
03
Vol+
Vol-
Note
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
(Discrete IR Code)
R/C Button
(Discrete IR Code)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
(Discrete IR Code)
R/C Button
R/C Button
A32
IR Codes
RS-232C
Code(Hex)
Function
E0
E1
28
99
Bright∧(Page UP)
Bright∨(Page Down)
BACK
AUTO CONFIC
72
71
63
61
7B
B0
B1
BA
8F
8E
5A
ID ON(Red Color)
ID OFF(Green Color)
(Yellow Color)
(Blue Color )
TILE
►
■
II
◄◄
►►
AV
BF
COMPONENT
D5
RGB PC
C6
HDMI/DVI
76
ARC (4:3)
77
ARC (16:9)
AF
ARC (ZOOM)
Note
R/C Button
R/C Button
R/C Button
R/C Button
(Discrete IR Code)
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
R/C Button
Discrete IR Code
(Input AV Selection)
Discrete IR Code(Input
COMPONENT Selection)
Discrete IR Code
(Input RGB PC Selection)
Discrete IR Code
(Input HDMI/DVI Selection)
Discrete IR Code
(Only 4 : 3 mode)
Discrete IR Code
(Only 16 : 9 mode)
Discrete IR Code
(Only ZOOM, Cinena ZOOM mode)
A33
E N E RGY STA R i s a s et of p owe rsaving guidelines issued by the U.S.
Environmental Protection Agency(EPA).
As an ENERGY STAR Partner LGE U. S. A.,Inc. has
determined that this product meets the ENERGY
STAR guidelines for energy efficiency.
M a ke s u re to re a d t h e I m p o r t a n t
Precautions before using the product.
Keep the Owner's Manual(CD) in an
accessible place for future reference.
The model and serial number of the SET
is located on the back and one side of
the SET. Record it below should you ever
need service.
MODEL
SERIAL
Important
WARRANTY VOID
IF REMOVED
3850TAZ209Y
Warranty void if removed.
WARNING -This is a class A product. In a domestic environment this product may cause
radio interference in which case the user may
be required to take adequate measures.
Temporary noise is normal when powering
ON or OFF this device.
Download PDF

advertising