LG | LF53075032B.C00GWE0 | LG LF53075032B Owner’s Manual

LED FLAT LIGHT
Safety Precautions
LED FLAT LIGHT is a product with enhanced efficiency and user convenience achieved through its energy
management and control technology and ultra-thin design. It is high-efficiency lighting capable of
replacing existing lighting devices such as fluorescent lamps, etc.
Low carbon emissions allows environmentally-friendly lighting
Product is mercury-free, presenting no harm to the environment or human body. Its annual CO2
emissions have been dramatically reduced, making it an environment-friendly product.
▶ The meanings of the signs displayed on the product and user manual are as follows:
•This sign means use caution for dangerous items and operations. For parts with this sign,
user must read the manual carefully and follow instructions in order to avoid risks.
•This sign is for displaying risks involving electric shock under certain conditions.
Comparison of CO2 emissions (unit: kgCO2)
LED FLAT LIGHT
53W/60W
Advantages
High efficiency reduces energy costs
Replacing existing lighting devices with the LED FLAT LIGHT can reduce energy costs by 30% or more.
Existing lamp
User Manual
34% - 70%
increase in energy efficiency
CAUTION
● Violation of precautions may lead to light injury or product damage.
WARNING
Natural light prevents glare
Product is heavy. Use a trolley when
transporting the product.
It provides the lowest and best glare level in the industry by producing pleasant, healthy, and
natural light without the use of a louver.
•Dropping the product may cause
product damage and malfunction.
Dimming control provides additional energy reduction costs
Existing light
Dimming control utilizing an illumination intensity sensor reduces electricity usage, thereby
providing approximately 70% energy reduction.
Light control application provides energy reduction
● Violation of warnings may lead to serious injury or death.
Has the equivalent effect
of planting 17 trees
※ If used 12 hours each day for a year
※ Conversion constant 0.573 kgCO2/Kwh, 3.86kgCO2/tree)
※ LG’s test standards
Reduction in electric energy usage
LG FLAT 53W
WARNING
LED FLAT LIGHT
Use with proper rated voltage.
•Risk of fire and product damage.
Do not install product in places
exposed to dampness.
•Risk of fire.
Install a circuit breaker.
•Risk of fire and electric shock.
Do not install in areas that have risks
of flooding.
•Risk of electric shock.
Perform grounding work.
•Risk of electric shock.
Do not install on un-leveled ceilings.
• Risk of product falling, which may lead
to product damage and injury to the
user.
Electric work must be performed by a
certified technician according to the
installation manual.
Dimming control system
Electricity 80W
Electricity 53W
Electricity 24W
Existing lamp
• Please read the 「Safety Precautions」 prior to use for your safety.
• This manual is intended to prevent product damage and protect the user’s safety.
• Place the manual at a place where it can be easily located by all potential users.
LED
Long life expectancy provides low maintenance cost
LED (Dimming control)
If used for 12 hours a day, the product can be used for 10 or more years without replacement.
Thus, maintenance costs are low, making it an economically sound option.
※ This function is provided as an optional part.
There may be differences depending on the
conditions of use.
Product Configuration and Size
WARNING
Turn power off before installation.
• Risk of electric shock.
WARNING
Do not randomly connect the power
polarities.
• Risk of product damage and accidents.
Installation
1. Product Configuration
Do not stare directly at the lamp
when turned on.
• Strong light may cause visual
impairment.
Do not expose the product to water
when cleaning it.
• Risk of fire and electric shock.
• Inadequate power capacity and faulty electric
work may lead to fire or electric shock.
1. T-BAR
LED FLAT LIGHT is a product with enhanced efficiency and user convenience achieved through
its energy management and control technology and ultra-thin design. It is high-efficiency
lighting capable of replacing existing lighting devices such as fluorescent lamps, etc.
• Make sure to turn off the main power switch of the installation space before connection.
• Connect so that the colors of the 3 power cables match. (LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
Top Cover
Do not store in a humid area.
• Risk of product malfunctioning.
Must use woodscrews provided by
LG Electronics during installation.
• Risk of product falling and injury to
user.
Do not use for purposes other than
lighting.
(Heating food, drying clothes, etc.)
• Risk of fire.
Interior wiring
of the building
NEUTRAL
Diffuser Plate
Never disassemble the product.
• Risk of accidents such as electric shock
and product damage.
LIVE
P.E.
Product’s
power cables
Bottom Cover
Do not use the product if impurities
are present in the product or if the
product is submerged.
• Risk of accidents such as electric shock
and product damage.
Must fix the product properly
on the ceiling.
• Risk of product dropping and causing
injury to the user.
Must have at least two or more
people working during installation.
• Risk of product dropping and causing
injury to the user.
Do not disassemble or arbitrarily
remodel the product. Do not use for
underwater lighting purposes.
(Underwater landscape, searchlight,
fishing, events, etc.)
• Risk of fire and electric shocks.
If the lamp turns off by itself, do not
disassemble the product. Contact
your local LGE sales representative
for repair.
• Risk of electric shock and product
malfunctioning.
Converter
Do not use if the product has been
dropped or exposed to shock.
• Risk of product malfunctioning.
< 600 x 600 Type >
If the external flexible cable or cord of this Luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
1
Drill and prepare the ceiling
so the hole is smaller than the
product.
2
Connect the 3 product cables
to the interior wiring of the
building. For finishing cap,
use standardized products.
3
Rotate the connected
product by 20 degrees.
Then insert it into the T-bar
insertion space.
• Make sure that all 4 sides of
the product match the T-bar.
4
Place the horizontal product
into the T-bar.
5
Ensure the inserted product
is horizontal.
6
Once installation is complete,
turn on the power switch to
check it is operating properly.
• After the installation is
complete, remove the
protective sheet.
< 300 x 1200 Type >
2. Product Size
CAUTION
Do not install where it may be
exposed to direct sunlight, humidity,
or dust.
Alcohol
Benzene
Do not install near potential
sources of fire or inflammable
objects, such as paper or cloth.
• Risk of product malfunctioning and
accidents.
Do not clean the product with
inflammable substances such as
alcohol, benzene, and acetone that
may alter the surface.
*Unit: mm
T : T -BAR
M : M-BAR
Check the following before requesting repair service
Model Information
2. M-BAR
• Make sure to turn the main power switch of the installation space before connection.
• Connect so that the colors of the 3 power cables match.
(LIVE: BROWN, NEUTRAL: BLUE, P.E.: GREEN/YELLOW)
• Use woodscrews provided by LG Electronics.
Symptom
It won’t turn on.
Check
Category
Check to see if the power is connected or
P.E.
1
2
4
5
Connect the 3 product cables
to the interior wiring of the
building. For finishing cap,
use standardized products.
3
Check the installation
location.
5000
5700
4000
5000
5700
K
Light Output (Lumens)
3600
3800
4000
3900
4600
4900
4800
Im
68
72
76
74
77
82
80
Im/W
Dimming Terminal Connection
※ To dim the lamps, a compatible dimmer should be used.
The use of incompatible dimmers will result in damage to the products.
Before installing dimmers, verify the compatible dimmer list with your local
LGE sales representative.
+
Connection
Terminal
10mm
AWG.20-24
※ This dimming terminal is for cable dimming control use (0-10V).
※ Please check the polarity of terminal as shown in the wiring diagram before
connecting the dimming wires.
※ Do not connect line voltage to the dimming terminal. LGE is not liable for
damage due to miswiring 0-10V dimming wires with line voltage.
※
※ For more information, contact your local LGE sales representative.
600 x 600
Type
request.)
Size
300 x 1200
Type
Make a service request.
Perform a lighting test to
see if the product is working
properly.
• After the installation is
complete, remove the
protective sheet.
-
4000
80
82
3000K
W
3000
Beam Angle
A certain area is dark.
Fix the product by using
woodscrews.
• Check to see that the
product is fixed into place.
60.0
Color Accuracy (CRI)
Product’s
power cables
Drill and prepare the ceiling
so that the hole is smaller
than the product.
53.0
Light Color (CCT)
Interior wiring
of the building
NEUTRAL
60W
Watts
Check to see if the dimming wires has short-circuited.
LIVE
53W
Category
Unit
4000K
600x600
Type
5000K
114
˚(degrees)
T-Bar : 596(W) x 596(D) x 94(H)
M-Bar : 620(W) x 620(D) x 94(H)
T-Bar : 296(W) x 1256(D) x 94(H)
5700K
mm
3000K
M-Bar : 310(W) x 1270(D) x 94(H)
Product Weight
5
Kg
Input Voltage
AC 110 - 240 ~
V
Input Frequency
50 / 60
Hz
Method of Power Input
Single-Phase Three-Wire System
Dimming
Dimmable with 0-10V DC control 1)
(Source Current : 1.1mA, Max.)
Power Factor (PF)
≥ 0.9
Some dimmers may not be compatible.
※ Dimming performance may vary depending on the dimmer installed.
※ For more information, contact your local LGE sales representative.
4000K
300x1200
Type
5000K
5700K
53W
60W
T-Bar
LF53073032B.C00***0
-
M-Bar
LF53173032B.C00***0
-
T-Bar
LF53074032B.C00***0
LF60074032B.D00***0
M-Bar
LF53174032B.C00***0
LF60174032B.D00***0
T-Bar
LF53075032B.C00***0
LF60075032B.D00***0
M-Bar
LF53175032B.C00***0
LF60175032B.D00***0
T-Bar
LF53075732B.C00***0
LF60075732B.D00***0
M-Bar
LF53175732B.C00***0
LF60175732B.D00***0
T-Bar
LF53175732B.C00***0
-
M-Bar
LF53173042B.C00***0
-
T-Bar
LF53074042B.C00***0
LF60074042B.D00***0
M-Bar
LF53174042B.C00***0
LF60174042B.D00***0
T-Bar
LF53075042B.C00***0
LF60075042B.D00***0
M-Bar
LF53175042B.C00***0
LF60175042B.D00***0
T-Bar
LF53075742B.C00***0
LF60075742B.D00***0
M-Bar
LF53175742B.C00***0
LF60175742B.D00***0
1)
※ Asterisk(*) will vary by model.
Limited Warranty
The limited warranty set forth below is given by LG Electronics, Inc. (“LGE”) with respect to the
lighting product packaged with this limited warranty. (the “Product”). Your Product ,when delivered
to you in new condition in its original packaging, is warranted against defects in materials or
workmanship as follows: for a period of three (3) years from the date of original purchase, defective
parts or a defective Product returned to LGE, or its authorized service providers, as applicable,
and proven to be defective upon inspection, will be repaired, or exchanged for a new Product, as
determine by LGE, or the authorized service provider. This limited warranty is conditioned upon
proper storage, installation, use and maintenance complying with their respective published
specifications, and does not apply in the following cases: (a) Loss of or damage to the Product
due to abuse, mishandling, alteration, accident, electrical current fluctuations failure to follow
operating, maintenance or environmental instructions prescribed by LGE in writing or services
performed by someone other than LGE or an authorized service provider. To make a warranty claim,
contact your local LGE sales representative. After contacting your local LGE sales representative,
you will receive instructions regarding if, when and where to ship non-conforming Product. Failed
Product must be returned for inspection and verification of non-conformance by LGE. Failure to
follow this procedure shall void this warranty. WARRANTY IS VOID IF PRODUCT IS NOT USED FOR
THE PURPOSE FOR WHICH THIS PRODUCT IS MANUFACTURED. NO IMPLIED WARRANTY, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, APPLIES
TO THE PRODUCT AFTER THE APPLICABLE PERIOD OF THE EXPRESS LIMITED WARRANTY STATED
ABOVE, AND NO OTHER EXPRESS WARRANTY OR GUARANTY, EXCEPT AS MENTIONED ABOVE,
GIVEN BY ANY PERSON OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BIND LGE. (SOME STATES
AND PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION MAY NOT APPLY TOYOU.)
P/No : MFL67182201 (REV03)
Download PDF

advertising