LG | PA1000T | LG PA1000T Owner’s Manual

Owner's Manual
LG Minibeam
DLP Projector
Please read the safety information carefully before using the product.
PA1000T
www.lg.com
2
LICENSE
LICENSE
Supported licenses may differ by model. For more information about licenses,
visit www.lg.com.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
This DivX Certified® device has passed rigorous testing to
ensure it plays DivX® video.
To play purchased DivX movies, first register your device at
vod.divx.com. Find your registration code in the DivX VOD
section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks
of DivX, LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
The terms HDMI and HDMI High-Definition Multimedia
Interface, and the HDMI logo are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and
other countries.
This device meets the EMC requirements for home appliances (Class B) and is
intended for home usage. This device can be used in all regions.
NOTE
yy Image shown may differ from your projector.
yy Your projector’s OSD (On Screen Display) may differ slightly from that shown in
this manual.
ING/CAUTION
ELECTRIC SHOCK
O NOT OPEN
SAFETY INSTRUCTIONS
3
SAFETY INSTRUCTIONS
Please take note of the safety instructions to prevent any potential accident or misuse
of the projector.
yy Safety precautions are given in two forms, i.e. Warning and Caution as detailed below.
WARNING: Failure to follow the instructions may cause serious injury and even death.
CAUTION: Failure to follow the instructions may cause injury to persons or damage to
the product.
yy Read the owner's manual carefully and keep it to hand.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING/CAUTION
The
lightning flash with
RISK OF ELECTRIC SHOCK
arrowhead
symbol, within
DO NOT OPEN
an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within
an equilateral triangle is
intended to alert the user to
the presence of important
operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE
AND ELECTRIC SHOCK, DO NOT
EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
4
SAFETY INSTRUCTIONS
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Indoor Installation
WARNING
yy Do not use the projector outside and
do not expose the product to any
humidity or water.
- Since the product is not waterproof,
this may result in a fire or electric
shock.
yy Do not place the projector in direct
sunlight or near heat sources such as
radiators, fires, stoves, etc.
- This may result in fire.
yy Do not place flammable materials
such as aerosols near the projector.
- This may result in fire.
yy Do not allow children to cling to or
climb up to the projector.
- This may cause the projector to fall,
causing injury or death.
yy Do not install the product in a
place with no ventilation (e.g., on
a bookshelf or in a closet) or on a
carpet or cushion.
- This may result in fire due to the
increase in internal temperature.
yy Do not place the product close to
sources of steam, oil or oil mist, such
as humidifiers and kitchen counters.
- Failure to do so may result in fire,
electric shock, or corrosion.
yy Do not install the product onto a wall
or ceiling that is close to sources of
oil or oil mist.
- The product may be damaged and
fall, resulting in serious injury.
yy Do not place the projector where it
might be exposed to dust.
- This may result in fire.
yy Do not use the projector in a damp
place such as a bathroom where it is
likely to get wet.
- This may result in fire or electric
shock.
yy Do not allow a tablecloth or curtain to
block the air vent.
- This may result in fire due to the
increase in the internal temperature.
yy Ensure good ventilation around the
projector. The distance between the
projector and the wall should be at
least 30 cm.
- This will prevent fire due to the
increase in the internal temperature.
SAFETY INSTRUCTIONS
CAUTION
yy When placing the projector on a table
or shelf, be careful not to put it near
the edge.
- The projector could fall due to
balance problems, which may
cause personal injury or damage to
the product. Make sure to use the
projector cabinet or stand that fits the
projector.
yy When moving the projector, make
sure to switch it off and remove the
power plug and cords.
- The power cord may be damaged,
resulting in fire or electric shock.
yy Do not place the projector on an
unstable or vibrating surface such as
a wobbly shelf or a slope.
- It may fall and cause injury.
yy Be careful not to tip the projector over
when connecting external devices to
the projector.
- This may cause personal injury or
damage to the projector.
5
Power
WARNING
yy The appliance coupler is used as the
disconnect device.
- Please make sure the device is
installed near the wall outlet to which
it is connected and that the outlet is
easily accessible.
yy The grounding wire should be
connected.
- Ensure that you connect the
grounding cable to avoid electric
shock.
If it is not possible to ground the unit,
have a qualified electrician install a
separate circuit breaker.
Do not try to ground the projector
by connecting it to telephone wires,
lightning rods or gas pipes.
yy The power plug should be inserted
fully into the power outlet.
- An unstable connection may cause
a fire.
yy Do not place heavy objects on the
power cord.
- This may result in fire or electric
shock.
yy Never touch the power plug with wet
hands.
- This may result in electric shock.
yy Do not plug too many devices into
one multi-power outlet.
- This may result in fire due to the
power outlet overheating.
yy Prevent dust from collecting on the
power plug pins or outlet.
- This may result in fire.
6
SAFETY INSTRUCTIONS
yy To turn off the main power, remove
the power plug, which should be
positioned so it is easy to access for
operation.
CAUTION
yy Hold the plug firmly when unplugging.
- A damaged wire may create a fire
hazard.
yy Ensure the power cord and plug are
not damaged, modified, severely
bent, twisted, pulled, sandwiched
or hot. Do not use the product if the
power outlet is loose.
- This may result in fire or electric
shock.
yy Keep the power cord away from
heating devices.
- The wire's sheath may melt, which
may result in fire or electric shock.
yy Place the projector where people will
not trip over or tread on the power
cord to protect the power cord and
plug from any damage.
- This may result in fire or electric
shock.
yy Do not turn the projector on or off
by plugging in the power plug or
unplugging it from the power outlet.
(Do not use the power plug as a
switch.)
- This may result in electric shock or
damage to the product.
yy Do not insert a conductor into the
other side of the wall outlet while the
power plug is inserted into the wall
outlet.
In addition, do not touch the
power plug immediately after it is
disconnected from the wall outlet.
- This may result in electric shock.
yy Only use the official power cord
provided by LG Electronics. Do not
use other power cords.
- This may result in fire or electric
shock.
When in Use
WARNING
yy Do not place anything containing
liquid on top of the projector such as
a vase, flower pot, cup, cosmetics, or
medicine; or ornaments, candles, etc.
- This may result in fire or electric
shock, or cause injury due to falling.
yy In the event that there is a heavy
impact or the cabinet is damaged,
switch it off, unplug it from the power
outlet and contact an authorized
service centre.
- This may result in electric shock.
yy Do not insert pieces of metal such as
coins, hairpins or metal debris, nor
flammable materials such as paper or
matches into the projector.
- This is to prevent electric shock or
fire.
yy In the event that liquid or a foreign
object falls into the projector, switch it
off and unplug it from the power outlet
and contact our service centre.
- This may result in fire or electric
shock.
SAFETY INSTRUCTIONS
yy Make sure that a child does not
swallow the batteries when you
replace the old remote control
batteries with new ones. Keep
batteries out of reach of children.
- If a child swallows a battery, consult
a doctor immediately.
yy Never open any cover on the
projector.
- There is a high risk of electric shock.
yy Do not look directly into the lens
when the projector is in use.
- The bright light may damage your
eyes.
7
yy When you play a game by connecting
a game console to a projector, it is
recommended that you maintain a
distance of more than four times the
diagonal length of the screen.
- Make sure that the connecting
cable is long enough. Otherwise, the
product may fall causing personal
injury or damage to the product.
yy Do not place the projector or its
remote control with battery in
an extremely high temperature
environment.
- This may result in fire.
yy When the lamp is on or has just been
turned off, avoid touching the air vent
or lamp, because these will be very
hot.
yy Do not use 3D glasses if you do not
watch 3D.
yy If there is a gas leak in the room
with the projector, do not touch the
projector or power outlet. Open the
windows for ventilation.
- Sparks may cause fire or burns.
yy Do not place heavy objects on the
projector.
- It may fall down and cause personal
injury.
yy Unplug the power cord from the outlet
during a lightning storm.
- This will prevent shock or damage
to the projector.
yy Do not use the projector near
electronic devices that generate a
strong magnetic field.
yy Do not put the plastic package used
to pack the projector around your
head.
- This may cause suffocation.
yy Do not keep your hand on the
projector for a long time when it is
running.
CAUTION
yy Be careful not to allow any impact to
the lens during transport.
yy Do not touch the lens of the projector.
- The lens may be damaged.
yy Do not use any sharp tools on the
projector such as a knife or hammer,
because this may damage the casing.
yy In the event that no image appears
on the screen or no sound is heard,
stop using the projector. Switch off
the projector, unplug it from the power
outlet and contact our service centre.
- This may result in fire or electric
shock.
8
SAFETY INSTRUCTIONS
yy Do not drop anything onto the
projector or allow anything to bang
into the projector.
- This may cause damage to the
projector or personal injury.
yy It is recommended that you maintain
a distance of more than 5 to 7 times
the diagonal length of the screen.
- If you watch the screen at a close
distance for a long time, your eye
sight may become worse.
yy Do not block the light beam emitted
from the projector using a book or
other object.
- Lengthy exposure to the projector
beam may result in fire. In addition,
the lens may be overheated and
damaged by the reflected heat.
yy Do not start the projector with the
volume turned up high.
- High volume may damage hearing.
yy Do not use high voltage electrical
equipment near the projector, (e.g.
bug zapper). This may result in
product malfunction.
Cleaning
WARNING
yy Do not spray the projector with
water when cleaning. Make sure
water does not flow into the projector.
- This may result in fire or electric
shock.
yy When there is smoke or a strange
smell coming out from the projector or
a foreign object falls into the pro­jector,
switch it off and unplug it from the
power outlet and contact our service
centre.
- Otherwise, this may result in fire or
electric shock.
yy Use air spray, a soft cloth or a cotton
swab moistened with a lens cleaning
chemical or alcohol to remove dust or
stains on the front projection lens.
CAUTION
yy Contact your seller or our service
centre once a year to clean the
internal parts of the projector.
- If you do not clean the projector
for a long period of time, dust will
accumulate, which may result in fire
or damage to the projector.
yy When cleaning plastic parts such as
the projector case, unplug the power
first and wipe with a soft cloth. Do
not spray with water or wipe with a
wet cloth. Never use glass cleaner,
automobile or industrial shiner,
abrasives, wax, benzene, or alcohol
as these can damage the projector.
- This can result in fire, electric shock
or cause damage to the product
(deformation and corrosion).
yy Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in electric
shock.
SAFETY INSTRUCTIONS
ANTENNA
yy If you are using an outdoor antenna,
please install it away from electrical
wires to make sure it does not touch
any nearby wires even when it falls
down due to heavy wind.
- Failure to do so may cause electric
shock or physical injury.
yy To prevent any raindrops flow into the
product, bend the outdoor antenna
wire where it comes indoors.
- Raindrops flowing into the product
may cause fire or electric shock.
Others
WARNING
yy Some users may experience a
seizure or other abnormal symptoms
when they are exposed to a flashing
light or particular patterns from a
video game.
yy When you go out, place the projector
out of reach of animals, and remove
the power plug from the wall outlet.
- Using a damaged power cord may
result in short circuit or fire.
yy Do not use the projector near highprecision electronic devices or those
that transmit weak radio signal.
- This may affect the operation of the
product, causing an accident.
yy Only a qualified technician can
disassemble or modify the projector.
For diagnosis, adjustment, or repair,
contact your seller or our service
centre.
- This may result in fire or electric
shock.
9
yy Do not stare directly into lens when in
operation, eye damage can occur.
yy No user serviceable parts inside unit.
High voltage parts can cause shock
and even electrocution.
yy Proper ventilation required, do not
block airflow around unit. Doing
so can cause injury and internal
overheating.
yy Do not touch the lens; doing so can
result in burns or damage to lens.
Lens and unit may be HOT during
and immediately after use. Use
caution when handling unit, allowing
for proper cool down.
yy Only use a grounded electrical outlet.
yy Do not insert anything into or cover
up the exhaust vents.
- This may result in fire or electric
shock.
yy Follow all maintenance guidelines
for optimal use; service only at an
authorized service centre.
10
SAFETY INSTRUCTIONS
CAUTION
yy Do not mix new batteries with old
ones.
- Burst or leaking batteries may result
in damage or injury.
yy Be sure to unplug if the projector is
not to be used for a long period.
- Accumulated dust may result in fire
or electric shock due to overheating,
ignition, or poor insulation.
yy Only use the specified type of battery.
- Burst or leaking batteries may result
in damage or injury.
yy Dispose of used batteries properly.
- This may result in explosion or fire.
The correct method of disposal may
vary depending on your country or
region. Dispose of the battery pack
as instructed.
yy Do not throw or disassemble the
battery.
- This may result in fire or explosion
due to damage to the battery.
yy Always use batteries approved and
certified by LG Electronics.
- This will prevent damage or fire.
yy Store batteries away from metallic
objects, such as keys and paper clips.
- Excess current may cause a rapid
increase in temperature, resulting in
fire or burns.
yy Do not store the batteries near any
heat source, such as a heater.
- This may result in fire or damage to
the product.
yy Do not store batteries at temperatures
higher than 60 °C or in high humidity.
- This may result in explosion or fire.
yy Keep the batteries and remote out of
reach of children.
- This will prevent personal injury or
damage to the product.
yy Make sure that the battery is installed
correctly.
- This prevent explosion or fire.
yy The battery contains lithium-ion, so it
must be handled with care.
- This may result in explosion or fire.
yy Make sure you use the same type of
batteries for replacement.
yy Incorrect battery replacement may
cause fire.
Risk Group 2
CAUTION Possibly hazardous optical
radiation emitted from this product. Do
not stare at operating lamp. May be
harmful to the eye.
CONTENTS
11
CONTENTS
LICENSE2
SAFETY INSTRUCTIONS
3
PREPARATION13
Accessories13
Optional Extras
14
Parts and Components
15
Installation17
-- Installation Precautions
17
-- Projection Distance per Screen Size 18
-- How to Install the Projector On a Tripod
19
-- Kensington Security System
19
REMOTE CONTROL
20
USING THE PROJECTOR
22
Connecting the Antenna or Cable
22
Watching Projector
-- Turning on the Projector
-- Focus of the Screen Image
-- Watching Projector
ENTERTAINMENT30
Using SCREEN SHARE
30
MY MEDIA
31
Before Using
-- Connecting a USB Device
-- Removing a USB Device
31
31
31
To Use My Media
-- Watching the Videos
-- Viewing the Photos
-- Listening to Music
-- Viewing Files
33
36
41
44
46
3D FUNCTION
48
While Watching 3D
48
Requirements for Watching 3D Images 51
-- To Use DLP-LINK (DLP-Ready) Type
Glasses53
Watching 3D Images
53
23
23
23
23
CUSTOMIZING SETTINGS
54
To Set Programme
-- Memorizing the Available Channels
24
24
AUDIO Settings60
Additional Options
-- Adjusting Aspect Ratio
-- Using the Keystone Function
-- Changing input device
-- Blank Function
26
26
27
27
28
TIME Settings63
Using the Quick Menu
29
SETTINGS54
PICTURE Settings
55
SETUP Settings62
WIRELESS Settings
64
LOCK Settings
65
OPTION 1 Settings67
OPTION 2 Settings69
12
CONTENTS
CONNECTING DEVICES
71
Connecting to HD Receiver, DVD, or VCR
Player, External Devices
72
-- HDMI Connection
72
-- HDMI to DVI Connection
72
-- AV Connection
73
-- Component Connection
73
Connecting a PC
-- HDMI Connection
-- HDMI to DVI Connection
-- RGB Connection
74
74
74
75
Connecting a Laptop
-- HDMI Connection
76
76
Connecting to Headphones
77
Using the Mirroring Function of a Mobile
Phone78
-- MHL/Slimport Connection
78
MAINTENANCE79
Cleaning79
-- Cleaning the Lens
79
-- Cleaning the Projector Case
79
SPECIFICATIONS80
PREPARATION
13
PREPARATION
Accessories
Accessories included with the project are show below.
The pictures may differ slightly from the actual product.
Accessories are subject to change without prior notice.
New accessories may be added or old ones removed.
Remote Control
Two AAA Batteries
Owner's Manual
Owner's Manual CD
Computer Cable
Composite Gender
AC-DC Adaptor
Power Cord
Bag
yy When connecting an HDMI or USB cable, or
connecting a USB flash drive to the HDMI or USB port,
use a product that has a width of 18 mm or less and a
height of 10 mm or less. If the USB cable or USB flash
drive does not fit the USB ports of the projector, use
an extension cable that supports USB 2.0.
yy Use a certified cable with the HDMI logo attached.
yy If you do not use a certified HDMI cable, the screen may not display or a connection
error may occur. (Recommended HDMI cable types)
- High-Speed HDMI®/™ Cable
- High-Speed HDMI®/™ Cable with Ethernet
14
PREPARATION
Optional Extras
To purchase optional accessories, visit an electronics store or online shopping site or
contact the retail store where you purchased the product. Optional accessories are
subject to change without prior notice.
Projection Screen
Tripod
HDMI Cable
Video Cable
Audio Cable
3D glasses
(DLP-LINK or DLPReady Type)
RGB to Component cable
Component Cable
MHL or Slimport cable
RF Cable
PREPARATION
15
Parts and Components
The projector is manufactured using high-precision technology. You may, however, see
tiny black dots and/or bright coloured dots (red, blue or green) that continuously appear
on the projector screen. This is a normal result of the manufacturing process and does
not indicate a malfunction.
Control Panel
VOL +
VOL -
P
P
Vent1
Speaker
Speaker
Lens2
Button
(POWER)
(SETTINGS)
P ,
(PROGRAMME)
VOL -, +
, , ,
(OK)
P
P
P
VOLVOL
+ +
VOLVOL
- -
P
Focus ring
Description
Turns the projector on or off.
Displays or closes the Settings menu.
Changes the programme or sets the features.
Adjusts the volume level.
Sets the function or moves the cursor.
Shows the current mode and saves changes to the settings.
1 Due to the high temperature of vent area, do not get close to the vent area.
2 Do not touch the lens when using the projector. The lens may be damaged.
16
PREPARATION
VOL +
VOL -
P
P
(USB Port)
(Headphone Port)
HDMI/MHL Port
ANTENNA IN Port
RGB IN Port
DC IN Port
AV IN Port
PREPARATION
17
Installation
Installation Precautions
yy Place the projector in a well-ventilated
environment.
- To prevent internal heat build-up,
install the projector in a wellventilated place.
Do not place anything near the
projector as this may block its air
vents. If the air vents are blocked,
the internal temperature will
increase.
- Do not place the projector on a
carpet or rug. If the vent is on the
bottom, use the projector on a solid
level surface and ensure the vent is
not blocked.
- Be sure to prevent foreign objects
such as paper debris from entering
the projector.
- Leave enough distance (30 cm or
more) around the projector.
yy Do not place the projector in a hot
or humid environment.
- Do not place the projector in a hot,
cold, or humid environment.
yy Do not place the projector in a place
where it will easily attract dust.
- This may result in fire.
yy Never open any cover on the
projector. There is a high risk of
electric shock.
yy The projector is manufactured using
high-precision technology. You may,
however, see tiny black dots and/
or bright coloured dots (red, blue or
green) that continuously appear on
the projector screen. This is a normal
result of the manufacturing process
and does not indicate a malfunction.
yy The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
yy To install to the ceiling, attach the
ceiling-type bracket to the projector
with M4 x 8 mm screws.
18
PREPARATION
Projection Distance per Screen Size
1 Place the projector on a sturdy, level surface, together with the PC or audio/video
source.
2 Place the projector an appropriate distance away from the screen. The distance
between the projector and the screen determines the actual size of the image.
3 Position the projector so that the lens is at a right angle to the screen. If the
projector is not at a right angle, the projected image will look distorted. To correct
the distortion, use the Keystone function. (see page 27)
4 Connect the power cord of the projector and the connected device to the wall outlet.
Ratio of upward projection: 100 %
X/2
Y/2
Screen
51 mm
Screen Width (Y)
Screen Height (X)
Screen
X/2
Y/2
Projection distance (D)
Projection distance (D)
16:10 Ratio
Screen Size
(mm)
Screen Width
(Y) (mm)
Screen Height
(X) (mm)
Projection Distance
(D) (mm)
762
889
1016
1143
1270
1397
1524
1651
1778
1905
2032
2159
2286
2413
2540
646
754
861
969
1077
1185
1292
1400
1508
1615
1723
1831
1938
2046
2154
404
471
539
606
673
741
808
875
943
1010
1077
1145
1212
1279
1347
902
1056
1210
1366
1520
1674
1828
1983
2137
2291
2445
2601
2755
2909
3063
PREPARATION
19
How to Install the Projector On a Tripod
yy You can install this projector using a camera tripod.
As shown below, you can mount the projector instead of a camera on the tripod.
yy When stabilizing the tripod, we recommend using a locking bolt of standard size
4.5 mm or less. The maximum size allowed for the locking bolt is 5.5 mm.
(If it is longer than the maximum allowed size, it may damage the projector.)
Bolt used to
attach the
projector
Bottom side of the projector
⇒
+
The projector is
connected to this part.
Tripod
CAUTION
yy If you are using a tripod, be careful not to apply external force to the tripod. Doing
so may damage the projector.
yy Do not place the tripod on an unstable surface.
yy Be sure to use a tripod with a maximum load capacity of 3 kg or more.
yy To use the projector safely, position the tripod legs so that they are as wide and
stable as possible and be sure to securely attach the projector to the tripod.
Kensington Security System
yy This projector has a Kensington Security Standard connector. Connect a Kensington
Security System cable as shown below.
yy For more information on installation and use of the Kensington Security System,
refer to the user’s guide provided with the Kensington Security System.
yy The Kensington Security System is an optional accessory.
yy What is Kensington? Kensington is a
company that provides security systems
for laptops and other electronic devices.
Website: http://www.kensington.com
20
REMOTE CONTROL
REMOTE CONTROL
Open the lid at the back of the remote control and insert
the batteries as described in the
instructions.
Use new batteries and do not mix regular or rechargeable
batteries. (1.5 V AAA)
CAUTION
yyDo not mix new batteries with old ones.
POWER
Turns the projector on or off.
TV/RAD
Selects Radio, TV and DTV programme.
INPUT
Changes the input source.
Number buttons
Enters numbers.
LIST
Displays the programme list.
Q.VIEW
Returns to the previously viewed programme.
Adjusts the volume level.
FAV
Accesses your favourite programme list.
3D
Shows 3D images.
MUTE
Mutes the sound of the projector.
P
Scrolls through the saved programmes.
PAGE
Moves to the previous or next screen.
REMOTE CONTROL
21
SETTINGS
Displays or closes the Settings menu.
STILL
Freezes the moving image.
(Available in any mode other than USB mode.)
Q.MENU
Allows you to change the settings easily.
Up/Down/Left/Right buttons
Switches between menu functions.
OK
Shows the current mode and saves changes to the
settings.
Returns to the previous screen.
AUTO
Automatically adjusts the RGB input image.
EXIT
Exits the menu.
Playback control buttons
Controls playback of MY MEDIA.
INFO
Displays the information of a program or screen.
L/R
Switches left and right in 3D mode.
BLANK
Displays the empty screen for a while.
GUIDE
Shows programme guide.
TEXT / T.OPT (Teletext buttons)
These buttons are used for teletext.
SUBTITLE
Recalls your preferred subtitle in digital mode.
Color buttons
Sets detailed settings or gesture for each menu.
NOTE
yy If a cable is connected to the back port, the optimal operating
range is 3 metres or less (left/right) and within a 30 degree arc of
the remote control IR receiver.
VOL -
P
VOL +
yy When using the remote control, the optimal operation range is
6 metres or less (left/right) and within a 30 degree arc of the
remote control IR receiver.
P
30° 30°
yy For seamless operation, do not block the IR receiver.
yy When you carry the remote control in the portable bag, make sure that the buttons
on the remote control are not pressed by the projector, cables, documents or any
other accessories in the bag. Otherwise, it may significantly reduce the battery life.
22
USING THE PROJECTOR
USING THE
PROJECTOR
Connecting the
Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
ANTENNA IN port of the projector using
an RF cable (75 Ω).
You can watch public TV or cable
(analog, digital) TV.
(The RF cable is sold separately.)
NOTE
yy Ensure you use a standard coaxial
cable (75 Ω, sold separately) when
connecting to the projector input.
yy For better image quality in
locations where signal strength is
low, purchase and install a signal
amplifier (booster).
yy A signal splitter is required if you
want to use two or more projectors
through one antenna.
yy If you have any problems when
installing the antenna, please consult
a suitable retailer or the store where
you purchased the antenna.
USING THE PROJECTOR
Watching Projector
Turning on the Projector
The menu screen display in this owner's
manual is an example to help users
understand how to operate the product
and may look different from the actual
screen.
1 Connect the power cord correctly.
2 After waiting for a moment, press
the POWER button on the remote
control or the control panel.
3 In the Language Selection screen,
select a language.
4 Select an input signal by using the
INPUT button on the remote control.
Focus of the Screen
Image
When an image appears on the screen,
check if it is in focus and fits the screen
properly.
To adjust the focus of the image, rotate
the focus ring.
Focus
Ring
23
Watching Projector
1 In standby mode, press the POWER
button to turn the projector on.
2 Press the INPUT button and select
the input signal you want.
3 Control the projector using the
following buttons while watching
projector.
Button
P
LIST
0-9
MUTE
Q.MENU
Q.VIEW
Description
Scrolls through the saved
programmes.
Displays the programme
list.
Enters a programme
number.
Adjusts the volume level.
Mutes all sounds.
Accesses the quick
menu. (see page 29)
Returns to the previously
viewed programme.
4 To turn the projector off, press the
POWER button.
24
USING THE PROJECTOR
To Set Programme
Image shown may differ from your
projector.
Memorizing the Available
Channels
Memorizing or Deleting Channels
Manually
1 Press the SETTINGS button.
2 Press the , , , or button to
select SETUP and press the OK
button.
3 Press the
, button to select
Manual Tuning and press the OK
button.
Using the Auto Tuning function
This function allows your projector to
memorize the available channels. Be
sure to activate this function when you
move home or move the position of
your projector. The antenna must be
connected to your projector and the
channels must be currently available to
use this function.
1 Press the SETTINGS button.
2 Press the , , , or button to
select SETUP and press the OK
button.
3 Press the
, button to select
Auto Tuning and press the OK
button.
4 Select Start to start automatic
tuning. The projector scans and
saves available programmes
automatically.
5 When you are finished, press EXIT.
4 Scroll through the programme types,
5 and then add or delete programmes.
When you are finished, press EXIT.
NOTE
yy If the projector scans a blocked
programme, you will be prompted
to enter your password to keep the
programme scanned.
yy You can store up to 1000
programmes. The number
of programmes that you can
store differs depending on the
broadcasting signal environment.
yy Auto Tuning memorizes the
programmes that are currently being
broadcast.
yy The programmes are stored in the
order of DTV and TV.
USING THE PROJECTOR
Editing Your Programme List
Favourite Programme Setup
1 Press the SETTINGS button.
2 Press the , , , or button to
1 Press the SETTINGS button.
2 Press the , , , or button to
3 Press the
3 Press the
4 Edit programmes using the following
4 Move to your desired programme.
5 Press FAV to access the Set as
select SETUP and press the OK
button.
, button to select
Programme Edit and press the OK
button.
buttons.
Programme Edit Antenna
DTV
3-1
ꔂ Move ꔉ OK
RADIO
5-1
TV
Page 1/1
7-1
select SETUP and press the OK
button.
, button to select
Programme Edit and press the OK
button.
Favourite.
6 Press the
, buttons to scrolls
through programme group.
7 Press the OK button.
Set as Favourite
Skip
Button
Green
Yellow
Blue
FAV
Block/Unblock
Programme Number Edit ꘂ Favourite Pr.
Description
Selects a programme
number to be skipped.
Block or unblock a
programme.
Programme Number
Edit(Only Digital mode)
Selects your desired
programme number.
Adds a favourite
programme.
5 When you are finished, press EXIT.
25
Select a favourite programme group.
Multiple selection is available.
Group A
Group B
Group C
Group D
OK
Cancel
26
USING THE PROJECTOR
Additional Options
Adjusting Aspect Ratio
Menu
Full
Wide
yy Select SETTINGS → PICTURE →
Aspect Ratio to change the aspect
ratio.
NOTE
yy Available picture size may differ
depending on the input signal.
yy You can also use the Q.MENU button.
Menu
16:9
Full
Just
Scan
Original
Description
Resizes images to the 16:9
ratio.
Changes to the full screen
regardless of the aspect
ratio.
Displays video images in
the original size without
removing parts of the edge
of the image.
yy If you select Just Scan,
you may see image
noises at the edge or
edges of the screen.
When your projector
receives a wide screen
signal it will automatically
change to the picture format
broadcasted.
4:3
14:9
Zoom
Cinema
Zoom 1
Description
When projector receives the
wide screen signal, it will
let you adjust the picture
horizontally or vertically,
in a linear proportion,to fill
the entire screen fully. 4:3
and 14:9 video is supported
in full screen without any
video distortion through
DTV input.
yy In Analogue/DTV/AV
mode, Full Wide is
available.
Resizes images to the
previous standard 4:3.
You can view a picture
format of 14:9 or a general
projector programme in the
14:9 mode. The 14:9 screen
is viewed in the same way
as in 4:3, but is moved up
or down.
Resizes the image to fit the
screen width. The top and
bottom parts of the image
may be cut off.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
Formats an image to the
cinemascope ratio, 2.35:1. It
ranges from 1 to 16.
Press the or button to
zoom in or out of the image.
Press the or button to
move the image.
yy If you enlarge or reduce
an image, the image may
be distorted.
27
USING THE PROJECTOR
Using the Keystone
Function
Changing input device
To prevent the screen image from
becoming trapezoidal, Keystone adjusts
the top and bottom width of the image
if the projector is not set up at a right
angle to the screen.
Because the Keystone function may
cause inferior screen image quality, use
this function only when it is not possible
to set up the projector at an optimal
angle.
• Keystone
0 ◀
L
R ▶
Close
1 Select SETTINGS → OPTION 2 →
Keystone to adjust the picture.
yy Keystone can be adjusted from -40 to
40.
2 Press the OK button when done.
To select an external input
Selects external input.
yy Press the INPUT button on the
remote control to display the input
selection screen.
- Connected inputs are displayed
first. However, Antenna / AV /
Component / SCREEN SHARE
input is always activated.
yy Select an input signal using the
remote control's INPUT button to
connect the projector to the desired
input. You can use the , , , or
button to switch between all the input
modes.
Input List
Antenna
ꔂ Move ꔉ OK
AV
Component
SCREEN SHARE
USB
RGB
HDMI
Input Label
Exit
28
USING THE PROJECTOR
Blank Function
Selecting an Input Label
Displays which devices are connected to
which input ports.
Input Label
◀
▶
Component ◀
▶
RGB
◀
▶
HDMI
◀
▶
AV
Close
1 Press the INPUT button on the
remote control to display the input
selection screen.
2 Press the red button.
3 Use the or button to scroll to
one of the input sources.
4 Use the
or button to select one
of the input labels.
Using the Blank Function
This function may be effective when you
need to draw attention during a meeting
or training.
1 Press the BLANK button, and the
screen is covered by the background
colour.
You can change the background
colour by referring to Selecting a
Blank Image.
2 Press any button to clear the blank
function.
To cover the screen temporarily,
press the BLANK button on the
remote control.
Do not block the lens with any object
while the projector is running.
It may become overheated and
deformed or even cause a fire.
Selecting a Blank Image
1 Press the SETTINGS button.
2 Press the , , , or button to
select OPTION 2 and press the OK
button.
3 Press the
, button to select
Blank Image and press the OK
button.
4 Use the
or button to move to
the setting or option you want and
press the OK button.
USING THE PROJECTOR
Using the Quick Menu
You can customize frequently used menus.
1 Press the Q.MENU button.
2 Press the or button to select a
menu and press OK.
Menu
Description
Aspect
Resizes the picture.
Ratio
PJT Mode Turns the projected image
upside down or flips it
horizontally.
Picture
Changes the picture
Mode
mode.
Audio or Changes the sound
Audio
output.
Language
Sleep
Sets the projector to be
Timer
turned off at the specified
time.
Clear
Makes the voice from the
Voice II
projector crisp and clear.
Skip Off/ Sets the Skip Off/On.
On
USB
Allows you to remove a
Device
connected USB device in
a safe manner.
(The menu is displayed
only when the USB device
is connected.)
3 Press the
, button to scroll
through the following menus.
29
30
ENTERTAINMENT
ENTERTAINMENT
Using SCREEN SHARE
1 Set the external input of the projector to SCREEN SHARE.
2 Enable related SCREEN SHARE function on the device you wish to connect.
3 Connect the Projector from the search list on the device you wish to connect.
(When you connect the projector to your laptop, input the PIN code shown on your
display. The request for a PIN will be shown only at the initial connection.)
4 If the desired device accepts the request, SCREEN SHARE will be started.
CAUTION
yy Windows 7 / 8 / 8.1 are compatible with SCREEN SHARE. However, other versions
of Windows, and some other operating systems, may not be compatible with
SCREEN SHARE.
yy Ice Cream Sandwich, Jellybean, and KitKat versions of LG’s Android devices are
guaranteed to be compatible.
yy When connecting via SCREEN SHARE, place the device close to the projector.
yy The response rate and image quality may vary depending upon the user’s
environment.
yy For more information on the device you want to connect to, refer to its owner’s
manual.
MY MEDIA
MY MEDIA
Before Using
Connecting a USB Device
Connect a USB device (external HDD,
USB memory) to the USB port of
projector to enjoy the content files stored
in the USB device with your projector.
You cannot write or delete data in the
USB device. Connect a USB flash drive
as shown below.
31
Removing a USB Device
1 Click the Q.MENU button.
2 Use the or button to move
to USB Device and press the OK
button.
3 Select a USB to remove. Wait for
confirmation that the USB device
has stopped before removing the
USB.
NOTE
yy If detached early, an error may
occur on the projector or the USB
storage device.
yy Once a USB device has been
selected for removal, it can no longer
be read. Remove the USB storage
device and then re-connect it.
USB Flash Drive
32
MY MEDIA
Tips for Using a USB Device
yy If the USB storage device has a builtin auto recognition programme or
uses its own driver, it may not work.
yy Some USB storage devices may not
work or may work incorrectly.
yy If you use a USB extension cable, the
USB device may not be recognized or
may not work properly.
yy Use only USB storage devices
formatted with the Windows FAT32 or
NTFS file system.
yy For external USB HDDs, it is
recommended that you use devices
with a rated voltage of less than 5 V
and a rated current of less than
500 mA.
y It is recommended to use a Hard
Disk Drive with its own power supply.
(If the power being supplied is not
sufficient, the USB storage device
may not be detected correctly.) Note,
a USB Hub is not supported.
yy It is recommended that you use USB
flash drives of 32 GB or less and USB
HDDs of 1 TB or less.
yy If a USB HDD with power-saving
function does not work properly,
turn the power off and on. For more
information, refer to the user manual
of the USB HDD.
yy Data in USB storage device can
be damaged so be sure to back
up important files to other devices.
Data maintenance is the user's
responsibility and the manufacturer is
not responsible for data loss.
MY MEDIA
To Use My Media
1 Press the SETTINGS button on the
remote control.
2 Select MY MEDIA.
Select desired file from the list. Watch
the chosen file.
Sets play related settings by checking
option during disk playback.
My Media supporting file
yy Maximum data transfer rate: 20 Mbps
(Mega bit per second)
yy External supported subtitle formats:
*.smi, *.srt, *.sub (MicroDVD,
SubViewer 1.0/2.0), *.ass, *.ssa, *.txt
(TMPlayer), *.psb (PowerDivX)
yy Internal supported subtitle formats:
SRT/ASS/SSA (Supports internal
subtitles generated from DivX6)
33
34
MY MEDIA
Video Supported Codec
Maximum: 1920 x 1080 @ 30p (only Motion JPEG 640x480 @ 30p)
Extension
.asf,
.wmv
.divx,
.avi
.mp4,
.m4v,
.mov
.mkv
.ts,
.trp,
.tp,
.mts,
.m2ts
.vob
.mpg
Codec
Video
VC-1 Advanced Profile, VC-1 Simple and Main Profiles
Audio
WMA Standard, WMA 9 Professional
Video
DivX3.11, DivX4, DivX5, DivX6, XVID, H.264 / AVC
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby Digital
Video
H.264 / AVC, MPEG-4 Part 2
Audio
AAC
Video
H.264 / AVC
Audio
HE-AAC, Dolby Digital
Video
H.264 / AVC, MPEG-2, VC-1
Audio
MPEG-1 Layer I, II, MPEG-1 Layer III (MP3), Dolby
Digital, Dolby Digital Plus, AAC
Video
MPEG-1, MPEG-2
Audio
Dolby Digital, MPEG-1 Layer I, II, DVD-LPCM
Video
MPEG-1
Audio
MPEG-1 Layer I, II
MY MEDIA
Audio File
File type
MP3
AC3
MPEG
AAC,
HEAAC
CDDA
LPCM
Item
Info
Bit rate
32 kbps to 320 kbps
Sampling rate
32 kHz to 48 kHz
Bit rate
32 kbps to 640 kbps
Sampling rate
32 kHz, 44.1 kHz, 48 kHz
Bit rate
32 kbps to 448 kbps
Sampling rate
32 kHz to 48 kHz
Bit rate
24 kbps to 3844 kbps
Sampling rate
8 kHz to 96 kHz
Bit rate
1.44 kbps
Sampling rate
44.1 kHz
Bit rate
1.41 Mbps to 9.6 Mbps
Sampling rate
Multi-channel : 44.1 kHz, 88.2 kHz / 48 kHz,
96 kHz
Stereo : 176.4 kHz, 192 kHz
35
36
MY MEDIA
Watching the Videos
In the Movie List, you can watch movies
stored on the connected USB device.
Controls playback and sets options while
viewing videos.
Tips for Playing Video Files
yy Some subtitles created by users may
not work properly.
yy The video and subtitle files should
be placed in the same folder. For
subtitles to display correctly, the video
and subtitle files must have the same
name.
yy We do not support any stream
that contains GMC (Global Motion
Compensation) or Qpel (Quarterpel
Motion Estimation).
yy Only H.264 / AVC profile level 4.1 and
lower is supported.
yy Video files that exceed 50 GB
(gigabyte) are not supported
for playback. The file size limit
is dependent on the encoding
environment.
yy DTS audio codec is not supported.
37
MY MEDIA
Browsing Movie List
Play a video file stored in the connected
device.
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to
Description
Moves to the upper level folder.
Exit Movie List.
6 Control playback by using the
following buttons.
select MY MEDIA and press the OK
button.
4 Use the
5 , or button to select
Movie List and press the OK button.
Use the , , , or button to
select the file you want and press
the OK button.
Page 1/1
Movie List
USB STORAGE DEVICE
book
doc
pic
Setting
Page 1/1
Butterfly_...
d
01:34:33
ꔅ Go to root folder
Go to upper folder
01:02:30 / 02:30:25
Q.MENU
꘧ Page Change
vid
��
Exit
Description
Thumbnails
Abnormal file
File not supported
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Option
Hide
Exit
Description
Shows the current playing
position. Use ,
buttons
to move forward or backward.
Stops playing and returns to
Movie List.
Returns to normal playback.
Pauses the media player.
If no button is pressed on the
remote control for 10 minutes
after pausing, the playback is
restarted.
Displays in slow motion.
Whenever this button is
pressed, the playback speed
is changed.
: x2, x4, x8, x16, x32
You can use the Energy
Saving mode.
Option A pop-up window will appear.
Hide Hides the playback bar.
Press the OK button to make
it appear.
Exit Returns to the Movie List
screen.
38
MY MEDIA
Options for Movie List
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
3 Use the
, ,
up each item.
, or
button to set
Setting
Description
Subtitle
The subtitle can be turned
Language on or off.
yy Language : One of
any of the available
languages can be
selected.
yy Code Page : A
character set used
for a subtitle can be
selected.
By default, the subtitle
is displayed in a
language configured
in OPTION 1
Language.
Set Video Play.
Setting
Picture
Size
Description
Selects the size of a
playback screen.
yy Full : Files are played
in full screen mode
according to the aspect
ratio of video.
yy Original : Displays the
video in the original
size.
Audio
Allows you to select the
Language language you want for
the file with multiple audio
tracks. This option is not
available if the file has
only one audio track.
Repeat
-S
ync : If a subtitle
is not synchronized
with its video, you can
adjust its speed at 0.5
seconds unit.
-P
osition : Moves the
location of a subtitle.
-S
ize : Changes the
subtitle font size.
Turns the repeat function
On or Off.
When it is set to off, the
next file can be played
sequentially if the file
name is similar.
MY MEDIA
Subtitle Language
Subtitle
Language
Language
Latin1
English, Spanish,
French, German, Italian,
Swedish, Finnish, Dutch,
Portuguese, Danish,
Romanian, Norwegian,
Albanian, Gaelic, Welsh,
Irish, Catalan, Valencian
Latin2
Bosnian, Polish,
Croatian, Czech, Slovak,
Slovenian, Serbian,
Hungarian
Latin4
Estonian, Latvian,
Lithuanian
Cyrillic
Bulgarian, Macedonian,
Russian, Ukranian,
Kazakh
Greek
Greek
Turkish
Turkish
Hebrew
Modern Hebrew
Chinese
Simplified Chinese
Korean
Korean
Arabic
Arabic
Set Video.
You can change video settings.
(Refer to "PICTURE Settings" 55)
Set Audio.
You can change audio settings.
(Refer to "AUDIO Settings" 60)
39
40
MY MEDIA
Registering the DivX code
Checks DivX Reg. Code for replaying
DivX protected videos. Register at
http://vod.divx.com.
Use Reg. Code to rent or purchase
movies at www.divx.com/vod.
1 In the Settings menu, move to
OPTION 1 and press DivX(R) VOD.
To deregister the DivX code
Use the DivX deregistration code to
deactivate the DivX DRM function.
1 In the Settings menu, move to
2 OPTION 1 and press DivX(R) VOD.
Use the or button to go to
Deregistration and press the OK
button.
Registration
Registration
Deregistration
Deregistration
Close
Close
or button to move
to Registration and press the OK
button.
Your device is already registered.
Are you sure you wish to deregister?
2 Press the
You must register your device to
play DivX(R) protected videos.
Registration code: XXXXXXXXXX
Register at http://vod.divx.com
Yes
No
Yes
3 Check the DivX Registration code.
NOTE
yy Rented/purchased DivX files cannot
be played if the DivX Registration
Code of a different device is used.
Use only the DivX Registration Code
granted to this specific device.
onverted files not conforming to the
yy C
DivX Codec Standard may not play or
may produce abnormal sound.
Deregistration code : ********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
3 Select Yes.
NOTE
yy What is DRM
[Digital Rights Management]?
This is a technology and service that
prevents the illegal use of digital
contents to protect the benefits and
rights of the copyright owner. Files can
be played after the license is verified
through an online method, etc.
41
MY MEDIA
Viewing the Photos
You can view photos stored on a
connected device.
Supported Photo Files
PHOTO (*.JPEG)
Baseline: 64-pixel (width) x 64-pixel
(height) - 15360-pixel (width) x
8640-pixel (height)
Progressive: 64-pixel (width) x 64-pixel
(height) - 1920-pixel (width) x 1440-pixel
(height)
yy Only JPEG files are supported.
yy Non-supported files are displayed in
the form of an icon.
yy An error message is displayed for
corrupted files or file formats that
cannot be played.
yy Corrupted files may not be displayed
properly.
yy It may take some time to view highresolution images in full screen.
Browsing Photo List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to
select MY MEDIA and press the OK
button.
4 Use the
, or button to select
Photo List and press the OK button.
5 Use the
, , , or button to
select the file you want and press
the OK button.
❶
❷
❸
Photo List
USB STORAGE DEVICE
book
doc
pic
❺
❹
Page 1/1
꘧ Page Change
vid
Page 1/1
Butterfly_...
06/09/2010
ꔅ Go to root folder
❻
Go to upper folder
❼
Exit
❽
Description
Thumbnails
Abnormal file
File not supported
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
42
MY MEDIA
6 Control playback by using the
Setting
following buttons.
Option
01_a.jpg
2008/12/10
1920 x 1080
479 KB
[1/4]
Slideshow
Hide
BGM
ꔦ
Q.MENU
Option
Hide
Exit
Setting
Description
Selects the previous or
next photo.
Slideshow All photos are displayed
during slide show.
yy Set Slide Speed in the
Option → Set Photo
View. menu.
BGM
You can listen to music
while viewing photos in
full size.
yy Set BGM in the
Option → Set Photo
View. menu.
Rotates photos.
yy Rotates a photo 90°,
180°, 270°, 360°
clockwise.
yy Photos cannot be
rotated if their width is
greater than the height
of the max. supported
resolution.
Views the photo in full
mode or original mode.
Press the blue button to
enlarge the image.
You can use the Energy
Saving mode.
Exit
Description
A pop-up window will
appear.
Hides the menu on the
full size screen.
yy To see the menu,
press the OK button
on the remote control.
Exit from full screen
photo view.
MY MEDIA
Options for Photo List
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
3 Use
, , , or
each item.
Set Photo View.
Setting
Slide speed
BGM
button to set up
Description
Selects a slideshow
speed.
Selects a music folder
for the background
music.
yy You cannot
change the music
folder while the
background music is
playing.
yy For background
music, only the
folder from the
same device can be
selected.
-R
epeat : Selects
repeat play.
-R
andom : Selects
random play.
Set Video.
You can change video settings.
(Refer to "PICTURE Settings" 55)
Set Audio.
You can change audio settings.
(Refer to "AUDIO Settings" 60)
43
44
MY MEDIA
Listening to Music
You can play audio files stored on the
connected device.
Description
Thumbnails
Abnormal file
Supported Music Files
File not supported
*.MP3
Bit rate range 32 Kbps to 320 Kbps
yy Sampling rate MPEG1 Layer3:
32 kHz, 44.1 kHz, 48 kHz
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
yy Sampling rate MPEG2 Layer3:
16 kHz, 22.05 kHz, 24 kHz
Browsing Music List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to
select MY MEDIA and press the OK
button.
4 Use the
, or button to select
Music List and press the OK button.
5 Use the
, , , or button to
select the file you want and press
the OK button.
❶
❷
❸
Music List
USB STORAGE DEVICE
❺
❹
Page 1/1
꘧ Page Change
Drive1
Page 1/1
Butterfly_...
d
03:25
ꔅ Go to root folder
❻
Go to upper folder
❼
Exit
❽
MY MEDIA
6 Control playback by using the
Options for Music List
following buttons.
Page 1/1
Music List
USB STORAGE DEVICE
꘧ Page Change
Drive1
Page 1/1
Butterfly_...
d
�
3 Use
��
Q.MENU
Setting
02:30 / 03:25
Option
Hide
Exit
Description
Changes the playing position.
Stops playing.
Returns to normal playback.
Pauses the media player.
Plays the previous/next file.
You can use the Energy
Saving mode.
Option Sets up the options of Music
List.
Hide Hides the playback bar.
Exit
1 Press the Q.MENU button.
2 Use the or button to move to
a desired option and press the OK
button.
03:25
002. - B02.mp3
45
yy Press the OK button to
make the playback bar
appear.
Returns to the Music List
screen.
, , , or
each item.
Set Audio Play.
button to set up
Setting
Description
Repeat Selects repeat play.
Random Selects random play.
Set Audio.
You can change audio settings.
(Refer to "AUDIO Settings" 60)
46
MY MEDIA
Viewing Files
You can see document files stored on a
connected device.
Supported File Formats
XLS, XLSX, DOC, DOCX, PPT, PPTX,
TXT, PDF
Microsoft Office
97/2000/2002/2003/2007 version
Adobe PDF 1.0/1.1/1.2/1.3/ 1.4 version
yy File Viewer realigns a document,
so it may look different from what is
displayed on a PC.
yy For documents that include images,
the resolution may look lower during
the realigning process.
yy If the document is large or has many
pages, it may take longer to load.
yy Unsupported fonts may be replaced
by other fonts.
yy The file viewer may not open for
Office documents that contain many
high resolution images. In that case,
reduce the image file size, save it on
a USB storage device and run the
file viewer again or connect your PC
to the projector and open the file on
your PC.
Browsing File List
1 Connect a USB storage device.
2 Press the SETTINGS button.
3 Use the , , , or button to
select MY MEDIA and press the OK
button.
4 Use the
, or button to select File
List and press the OK button.
5 Use the
, , , or button to
select the file you want and press
the OK button.
❶
❷
File List
USB STORAGE DEVICE
DOC
HWP
Butterfly_...
❹
❸
Page 1/1
꘧ Page Change
Drive1
Page 1/1
PDF
06/09/2010
PPT
TXT
ꔅ Go to root folder
❺
XLS
Go to upper folder
❻
Exit
❼
Description
File List
Moves to the upper level folder.
Current page/Total no. of folder
pages
Current page/Total no. of file
pages
Moves to the top level folder.
Moves to the upper level folder.
Exit
MY MEDIA
6 Control playback by using the
following buttons.
yy Click Go Page then the pop-up
window for selecting the number
of page appears. Input the page to
move to the page you want.
yy Press the VOL +, - button to zoom in
or zoom out.
1. Press OK.
2. Press the Up/Down/Left/Right
buttons to move to Go Page or
Zoom.
Go Page
ꔦ Zoom
Q.MENU
Option
Hide
Exit
Setting
Description
Go
Moves to the page you want.
Page
Use the Up/Down/Left/Right
buttons to select a page and
press the OK button.
Zoom Enlarges or reduces the
document.
Option Sets up the options of File
Viewer.
Hide
Hides the menu.
yy Press the OK button to
make it appear.
Exit
Returns to the File Viewer
screen.
47
Options for File List
1 Press the Q.MENU button.
2 Use , , , or button to set up
each item.
Set FileViewer Option
Setting
Single
Page
Loading
Description
On Loads and displays
pages one by one.
The initial loading
time is short but a
content heavy page
may be displayed
slowly.
Off Loads all pages of
a file to memory
before it starts to
display them. The
initial loading time
is long but you can
navigate pages
quickly after loading
is complete.
If a file is too large,
it may fail to load all
the pages.
Image
You can set the quality
Quality
of the image included
in the document. The
following three options are
available for the image
quality: High, Medium,
Low. Higher the image
quality, lower the display
time.
Document Selects initial document
Align
align method.
File View settings are default, so close
the currently opened document to apply
changes to the new document, if any.
48
3D FUNCTION
3D FUNCTION
3D technology uses different video frames for each eye to add depth to the video.
While Watching 3D
WARNING
yy If you view 3D video or images too
closely for a long period of time, your
eyesight may become worse.
yy If you watch the projector or game
screen for a long time with 3D glasses
on, you may experience dizziness or
eye fatigue.
yy People with chronic diseases
(epilepsy, cardiovascular disease,
blood pressure-related diseases,
etc.), pregnant women, and people
with serious motion sickness should
avoid watching 3D video.
yy People with stereo blindness, or with
stereopsis problems, should also
avoid watching 3D video content. It
may cause double vision or visual
discomfort.
yy People with strabismus, amblyopia,
or astigmatism may have difficulty
perceiving video depth and may be
fatigued easily due to double vision
or other ailments. It is recommended
to rest more frequently than other
viewers.
yy Because 3D can be recognized as
real, some viewers may get surprised
or overexcited.
yy Do not watch 3D images near fragile
objects or any objects that can be
knocked over easily.
yy Take care not to injure yourself as
you may subconsciously try to move
away from the life-like 3D images.
3D FUNCTION
yy Warning about photosensitivity
seizures
- Some users may experience a
seizure or other abnormal symptoms
when they are exposed to a flashing
light or particular patterns from a video
game. If anyone in your family has a
history of epilepsy or has ever
experienced any kind of seizure,
please consult your doctor before
viewing 3D images.
If you experience one of the following symptoms while watching a 3D
video, stop watching the 3D video
immediately and take a rest.
- Dizziness, switched eyesight, twitching of the eye or facial muscles,
involuntary movements, cramp, loss
of consciousness, confusion, loss of
sense of direction, or nausea. If the
symptom does not disappear, please
consult your doctor.
yy You can reduce the risk of
photosensitive seizures by taking the
following preventive measures.
- Take a rest of 5 - 15 mins. for every
1 hour of viewing.
- If vision varies between each eye,
correct the variation before beginning
to watch a 3D video.
- Ensure that the 3D video is directly in
front of you, at eye level.
- You should stop watching if you
experience a headache, fatigue or
dizziness.
- Do not view 3D images for a long
period of time when you are tired or ill.
49
CAUTION
yy Extra special care is required for
children watching a 3D video.
When Watching 3D Video
yy Prevent children of 5 years or
younger from watching a 3D video. It
may impair the development of their
eyes.
yy Children 10 years old or younger are
still developing their eyesight and may
have an excessive tendency to touch
or jump at the screen. Adult guidance
and supervision is recommended.
yy Since the distance between the eyes
is narrower for children than in adults,
children tend to notice a greater
difference in the images seen by each
eye. Therefore, even while watching
the same 3D video, children may
have a greater depth perception than
adults.
yy Young people of 19 years old or
younger may respond with sensitivity
to the light stimuli of 3D content.
Excessive viewing when fatigued is
not recommended.
yy Elderly viewers may have a reduced
depth perception than younger
viewers. Avoid watching video nearer
than the recommended distance.
yy Watch 3D images within the optimum
viewing angle and distance.
yy If you are outside the viewing angle
or distance, you may not be able to
see 3D images. You cannot view 3D
images when you are lying down.
50
3D FUNCTION
yy You may see left and right images
overlapped during projector
initialization after it is powered on. It
may take some time for optimization.
yy It may take some time for the 3D
image to look normal after you turn
your eyes away from the screen and
look back at the 3D image.
yy It may flicker slightly while watching
3D images under a 3 wavelength
lamp fluorescent light (50 Hz to
60 Hz) or near windows. If so, it is
recommended to block the sun light
with a curtain and to dim the lights.
yy The 3D glasses must be DLP-LINK
(DLP Ready) type.
yy You may not be able to watch 3D
properly if there is an obstacle
between the projector and 3D
glasses.
yy Install the 3D projector as far as
possible from other devices.
yy If a future 3D broadcasting format
that is not supported by this projector
becomes the standard, an additional
device such as a set-top box may be
required.
Please check the following when
using 3D glasses.
yy Do not use 3D glasses as ordinary
glasses, sunglasses or protective
goggles.
- If you do so, this may cause injury.
yy Do not store 3D glasses in very hot
or very cold conditions. If you do, this
may cause them to become distorted.
Do not use distorted glasses.
yy Do not drop 3D glasses or allow
them to come into contact with other
objects.
- This may cause product malfunction.
yy The lenses of 3D glasses are easily
scratched. Use a soft clean cloth
when cleaning them.
yy Foreign particles on the cloth may
cause scratches.
yy Do not scratch the surface of the 3D
glasses' lenses with sharp objects
or wipe them with chemicals. If the
lenses get scratched, images may not
look normal when viewing 3D.
3D FUNCTION
51
Requirements for Watching 3D Images
* Optimum viewing angle: Top/Bottom/Left/Right 9°
Recommended viewing distance: 3 m to 5 m
Recommended screen size: 101 cm
* Watching 3D videos should be done in dark room environments only.
NOTE
yy The pairing with the DLP-LINK glasses is affected by the intensity of light reflected
from the screen.
Therefore, the pairing with DLP-LINK glasses may not work properly if the light
reflected from the screen is not bright enough, such as when the surrounding area is
bright, the screen is big, or the maximum energy saving mode is enabled.
yy Some menus may not work while playing a 3D video.
yy You can only watch a 3D video properly when the 3D video format option has been
selected on the projector.
52
3D FUNCTION
1 Please check the minimum system requirements for your computer. Minimum
requirements are as follows:
Microsoft® Windows® XP, Vista 32/64 bit ,Windows 7 32/64 bit
Intel® Core 2 Duo or AMD Athlon™ X2 CPU or higher
More than 1 GB of system memory (2 GB recommended)
Free space of 100 MB or more
DirectX 9 or higher
Video card should support 120 vertical frequency (Hz).
Recommended video card requirements
- Graphic Processor speed 700 MHz higher
- Memory 512 MB higher
yy A laptop equipped with the chipsets above can be used but it may not work properly.
2 Set the video output to XGA 120 Hz and play a video file using a video player that
supports 3D output.
The following video players support 3D output: Stereoscopic Player, nVidia 3D
Vision, and TriDef 3D.
For more information on the players above, please visit their websites at:
www.3dtv.at
www.nvidia.com
www.tridef.com
3D FUNCTION
53
To Use DLP-LINK (DLP-Ready) Type Glasses
1 While watching 3D images from the projector, press buttons on the glasses.
2 When you press the button, the glasses flicker to be synchronized with the 3D
images.
(The flickering is a unique operation method of DLP-LINK type glasses. It may be
different depending on the glasses type.)
3 If the glasses flicker or problems occur while watching 3D, first turn the lights off to
make the room darker. Contact your projector seller for queries about the glasses.
Supported 3D input formats
Input
Signal Resolution
Vertical
Frequency
(Hz)
Supported 3D Formats
HDMI
XGA
1024x768
120
Frame Sequential / Frame Alternative
RGB
XGA
1024x768
120
Frame Sequential / Frame Alternative
yy The resolution supporting 3D mode is 1024x768 for HDMI and RGB input.
yy Some menus may not work in 120 Hz input.
Watching 3D Images
1 Play supported 3D video titles.
2 For RGB-PC, you must press AUTO on the remote control before watching 3D.
3 Press the 3D button.
4 While watching 3D images from the projector, press buttons on the glasses.
5 Press the L / R button to switch the playing direction of an image. Select a screen
with better 3D display quality.
yy If you press the 3D button during viewing, it returns to 2D.
54
CUSTOMIZING SETTINGS
CUSTOMIZING SETTINGS
SETTINGS
1 Press the SETTINGS button.
2 Use the , , , or button to select the desired item and press the OK button.
3 Use the , , , or button to set up the desired item and press the OK button.
4 Press the EXIT button when completed.
Menu
Description
PICTURE
Adjusts the image quality for optimal viewing.
AUDIO
Adjusts the sound quality and volume level.
SETUP
Sets up or edits a programme.
TIME
Sets the time and time-related features.
WIRELESS
Wireless-related features.
LOCK
Locks or unlocks a programme.
OPTION 1
Customizes the general settings.
OPTION 2
Customizes the settings related the projector.
INPUT
Selects the desired input source.
MY MEDIA
Accesses photo, music, movie, and document files.
55
CUSTOMIZING SETTINGS
PICTURE Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
PICTURE
PICTURE and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
4 Press the EXIT button when completed.
ꔂ Move ꔉ OK
yy ꕊ Energy Saving
: Medium
yy Picture Mode
: Standard
yy Contrast 100
yy Brightness 50
yy Sharpness 30
yy Colour
yy Tint
70
0
R
G
The available picture settings are described as follows.
Item
Energy
Saving
Description
Reduces power consumption by adjusting screen brightness.
Mode
Minimum/
Applies the pre-set Energy Saving mode.
Medium/
Maximum
Picture
Selects the picture mode optimized for the viewing environment or the
Mode
program. You can also customize advanced options for each mode.
Mode
Vivid
Maximizes the visual effect of video.
Heightens contrast, brightness and sharpness to display
vivid images.
Standard
Displays images in standard levels of contrast,
brightness and sharpness.
Eco
Displays the optimized images for natural scenery.
Cinema
Optimizes the image for a movie.
Sport
Optimizes the image for sports by emphasizing primary
colours and dynamic actions.
Game
Optimizes the image for playing games on fast-moving
screens.
Expert1/2
Menu for adjusting picture quality that allows experts and
amateurs to enjoy the best Projector viewing.
- Expert mode is for picture tuning professionals to
control and fine-tune using a specific image. For normal
images, the effects may not be dramatic.
Contrast
Adjusts the difference between bright and dark regions of the screen.
Brightness Adjusts the overall screen brightness.
56
CUSTOMIZING SETTINGS
Item
Sharpness
Colour
Tint
Advanced
Control
Picture
Option
Picture
Reset
Aspect
Ratio
Screen
Description
Adjusts the sharpness of the borders between bright and dark.
Horizontal and Vertical Sharpness are available only in Expert1/2.
Adjusts the intensity of all colours.
Adjusts the balance between red and green levels.
Customizes the advanced settings.
Sets optional settings.
Resets values customized by the user.
Each picture mode is reset. Select the picture mode you wish to reset.
Resizes the picture.
Adjusts the picture quality of RGB-PC input.
Option
Resolution
Auto
Config.
Position
Size
Phase
Reset
Available resolutions are 768 resolution (1024 x 768/
1280 x 768/ 1360 x 768, 60 Hz) and 1050 resolution
(1400 x 1050/ 1680 x 1050, 60 Hz).
Provides optimized picture quality by automatically
calibrating the mismatch of horizontal width and picture
shake caused by clashes between the internal settings of
the projector and various PC graphic signals.
yy You can also use the AUTO button on the remote
control.
Moves the image up/down/left/right.
Changes the screen size.
Makes the picture look clear by removing horizontal
noise.
Restores all the settings to the factory default.
CUSTOMIZING SETTINGS
57
Advanced Control
Item
Dynamic
Contrast
Dynamic
Colour
Colour
Gamut
Description
Adjusts contrast and colour to the optimal level according to the
screen’s brightness.
Adjusts colours for more natural-looking colours.
Selects the range of colours that can be expressed.
yy Standard: Displays the original colours of an input signal regardless
of the display features.
yy Wide: Makes use of the display's rich colours.
Skin Colour
Sky Colour
Grass
Colour
Gamma
Skin colour spectrum can be separately set to implement the skin
colour as defined by the user.
Sky colour is set separately.
Natural colour spectrum (meadows, hills, etc.) can be separately set.
Sets the gradation curve according to the output of the picture signal in
relation to the input signal.
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
Expert Control
Item
Dynamic
Contrast
Colour
Gamut
Description
Adjusts contrast and colour to the optimal level according to the
screen’s brightness.
Selects the range of colours that can be expressed.
yy Standard: Displays the original colours of an input signal regardless
of the display features.
yy Wide: Makes use of the display's rich colours.
Edge
Shows clearer and distinctive yet natural edges of the video.
Enhancer
Expert
Patterns used for expert adjustment.
Pattern
Colour Filter Filters a specific colour spectrum in RGB colours to fine-tune colour
saturation and hue accurately.
58
CUSTOMIZING SETTINGS
Item
Description
Colour
In Expert mode, you can customize the options of each mode.
Temperature Gamma: Select 1.9, 2.2, or 2.4.
a. M
ethod: 2 Points
- Pattern: Inner, Outer
- Points: Low, High
-R
ed/Green/Blue: Adjustable range -50 to +50.
- Apply to all inputs: T
he values of the Colour Temperature is
applied to all the input modes.
b. M
ethod: 20 Point IRE
- Pattern: Inner, Outer
- IRE (Institute of Radio Engineers) is the unit indicating the size
of a video signal and can be set to 0, 5, 10, 15, ... 100.You can
fine-tune for each setting as shown below.
- Luminance: The adjustment range is 50 to 500.
- Red/Green/Blue: The adjustment range is -50 to +50.
- Apply to all inputs: The values of the Colour Temperature is
applied to all the input modes.
Colour
Adjusts Red/Green/Blue/Cyan/Magenta/Yellow colours. Allows
Management an expert to adjust the tint using a test pattern. Six colours (Red/
System
Green/Blue/Cyan/Magenta/Yellow) can be selectively adjusted without
affecting other colours. You may not see colours change on a normal
picture even after adjustment.
-S
aturation Red/Green/Blue/Cyan/Magenta/Yellow,
Tint Red/Green/Blue/Cyan/Magenta/Yellow,
Luminance Red/Green/Blue/Cyan/Magenta/Yellow:
The adjustment range is -30 to +30 each.
* Depending on input signal or other picture settings, the range of detailed items for
adjustment may differ.
CUSTOMIZING SETTINGS
59
Picture Option
Item
Description
Noise Reduction Reduces screen noise in the video.
MPEG Noise
Reduction
Eliminates noise generated while creating digital picture signals.
Black Level
Adjusts the brightness or darkness of the screen to suit the black
level of the picture input using the degree of darkness (black level)
of the screen.
Real Cinema
Optimizes the screen for movie viewing.
Colour
Temperature
Adjusts the overall colour of the screen to suit your preference.
Select Warm, Cool, Medium or Natural.
60
CUSTOMIZING SETTINGS
AUDIO Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select AUDIO
AUDIO
and press the OK button.
yySound Mode
ꔂ Move ꔉ OK
: Standard
yySound Effect
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
yyAuto Volume
: Off
yyDTV Audio Setting
: Dolby Digital
4 Press the EXIT button when completed.
The available sound settings are described as follows.
Item
Sound Mode
Description
Sets the sound mode.
Mode
Standard
Suitable for all types of video.
News/ Music/
Sets audio optimized for a specific genre.
Cinema/ Sport/
Game
CUSTOMIZING SETTINGS
Item
Sound Effect
Description
The user can select various sound effects.
Mode
Clear Voice II
Makes the voice from the projector crisp and clear.
Virtual
LG’s proprietary audio processing technology
Surround
allows 5 channel-like surround sound from two
speakers.
Equalizer
Auto Volume
DTV Audio
Setting
61
yy When Clear Voice II is set to on, Virtual
Surround cannot be selected.
Adjusts the volume to a level of your choice using
the Equalizer.
yy Audio-band (100 Hz/ 300 Hz/ 1 kHz/ 3 kHz/
10 kHz) can be adjusted from - 10 to 10.
yy Reset: Resets voice options that the user has
changed.
Balance
Adjusts the balance of the left and right speakers.
Reset
Initialize the applied effect under the Sound Effect
menu.
Automatically adjusts the volume level.
When an input signal comprises different audio signals, this function
allows you to select the audio type you want.
If set to AUTO, the search order is HE-AAC → Dolby Digital+ →
Dolby Digital → MPEG and output is produced in the first Audio
Format found.
yy In Italy / Latvia / Lithuania only, the search order is HE-AAC →
Dolby Digital+ → MPEG → Dolby Digital.
yy If the selected Audio Format is not supported, another Audio
Format may be used for output.
62
CUSTOMIZING SETTINGS
SETUP Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
SETUP and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
SETUP
ꔂ Move ꔉ OK
yyAuto Tuning
yyManual Tuning
yyProgramme Edit
4 Press the EXIT button when completed.
The available setup settings are described as follows.
Item
Auto
Tuning
Description
Automatically tunes the programmes.
1. S
elect Country where the projector is used. Programme settings
change depending on the country you choose.
2. Initiate Auto Tuning.
3. Select Input Source of your choice.
4. Set Auto Tuning following screen instructions.
If Input Source is not connected properly, programme registration may
not work.
Auto Tuning only finds programmes that are currently broadcasting.
If Lock System is turned on, a pop-up window will appear asking for
password.
Manual
Adjusts programmes manually and saves the results.
Tuning
For digital broadcasting, signal strength and signal quality can be
checked.
For analogue broadcasting, you can set up station names and use
fine tuning (except for Satellite mode). Normally fine tuning is only
necessary if reception is poor.
You can also adjust the frequency (kHz) and Bandwidth.
Programme Edits the saved programmes.
Edit
Set as favourite programme, block/unblock programme, skip
programme etc. of the selected programme.
CUSTOMIZING SETTINGS
63
TIME Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select TIME
and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
TIME
ꔂ Move ꔉ OK
yyClock
yyOff Time
: Off
yyOn Time
: Off
yySleep Timer
: Off
yyAuto Off
: 60 min.
yyAutomatic Standby : Off
4 Press the EXIT button when completed.
The available time settings are described as follows.
Item
Clock
Off Time
/On Time
Description
Checks or changes the time while watching projector.
Mode
Auto
Synchronizes the projector clock to the digital time
information sent by the TV station.
Manual
Sets the time and date manually if the auto setup does not
correspond to the current time.
Sets On/Off time.
Select Off on Repeat to discontinue On Time / Off Time.
yy To use On Time / Off Time, set the current time correctly.
yy Even when the On Time function is on, the projector will turn off
automatically in 120 minutes when no button is pressed within that
time.
Sleep Timer Turns off the Projector after a preset number of minutes.
To cancel the Sleep Timer, select Off.
Auto Off
If there is no input signal or button press, the projector automatically
turns off after the preset time has elapsed.
Automatic Turns off the projector automatically after a set period of time if there is
Standby
no button input on the projector.
64
CUSTOMIZING SETTINGS
WIRELESS Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
WIRELESS
yySCREEN SHARE
WIRELESS and press the OK button.
ꔂ Move ꔉ OK
: [PJTR][LG][0000]
yyGroup
yyChannel
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
4 Press the EXIT button when completed.
The available wireless settings are described as follows.
Item
SCREEN SHARE
Description
The SCREEN SHARE displays the screen of the connected
device.
yy You can check the SCREEN SHARE's ID.
Mode
Group
Channel
This is the Group setting for each device
supporting the SCREEN SHARE feature. When
the wireless connection is weak or unstable,
adjust the Group setting to correct the problem.
You can change the channel used for wireless
connections.
yy Search Channels: Select channel searching
methods.
- Auto: The projector searches for available
channels and automatically selects the least
used channel.
- Manual: You can select a channel manually.
yy Channel: This is shown when Search
Channels is set to Manual. It allows you to
specify a channel number to use.
CUSTOMIZING SETTINGS
65
LOCK Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select LOCK
and press the OK button.
- To enter the LOCK menu, enter the preset
4-digit password. The initial password is set
as 0000.
LOCK
ꔂ Move ꔉ OK
yySet Password
yyLock System : Off
yyBlock Programme
yyParental Guidance : Blocking Off
yyInput Block
yyKey Lock
: Off
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
4 Press the EXIT button when completed.
The available lock settings are described as follows.
Item
Set Password
Description
Sets or changes projector password.
yy The initial password is set as 0000.
yy When France is selected for Country, password is not 0000 but
1234. When France is selected for Country, password cannot
be set to 0000.
Lock System
Locks the selected programme or external input.
First set Lock System to On.
Item
Blocks programmes with content inappropriate
Block
Programme for children. Programmes can be selected but the
screen is blank and the audio is muted. To watch a
locked programme, enter the password.
This function operates according to information
Parental
from the broadcaster. Therefore if the signal
Guidance
has incorrect information, this function does not
operate. Prevents children from watching certain
adult TV programmes according to the ratings
limit set. Enter a password to watch a blocked
programme. Ratings differ by country.
Input Block Block the input sources.
66
CUSTOMIZING SETTINGS
Item
Key Lock
Description
Locks control buttons on projector.
yy Key Lock function remains intact even in case of power
outage or when the power cord is removed from the wall
socket.
yy Key Lock function can only be set by remote control, and not
by the button on the projector.
yy Even though Key Lock is set to on, projector’s buttons can
turn on the power.
CUSTOMIZING SETTINGS
67
OPTION 1 Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
OPTION 1
ꔂ Move ꔉ OK
yyLanguage
OPTION 1 and press the OK button.
yyCountry : UK
yyDisability Assistance
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
yy3D Mode
yyAuto Input Search : Off
yyData Service
: Teletext
yyDivX(R) VOD
yyFactirt Reset
4 Press the EXIT button when completed.
The available option 1 settings are described as follows.
Item
Description
Language
Selects a desired Menu Language.
Country
Sets the country that the projector uses.
Projector settings are changed according to the broadcast
environment of the selected country.
yy If the country setting is changed, the Auto Tuning information
screen may appear.
yy In a country that Digital broadcasting regulation isn’t fixed,
some DTV functions may not work depending on digital
broadcasting circumstances.
yy If the country setting is set to “--”, European terrestrial digital
standard broadcasting programmes are available, but some
DTV functions may not work properly.
Disability
Assistance
Audio commentary or subtitles are provided for those who are
hard of hearing or visually impaired.
yy Hard of Hearing: This function is used for the hearing
impaired. If it is set to on, the subtitle is displayed by default.
yy Audio Description: This function is for the blind, and provides
explanatory audio describing the current situation in a TV
programme in addition to the basic audio. When Audio
Description is selected On, basic audio and Audio Description
are provided only for those programmes that have Audio
Description included.
3D Mode
Selects 3D mode.
68
CUSTOMIZING SETTINGS
Item
Description
Auto Input
Search
Automatically searches for and displays the input signal type
when it is received. It is available only with external inputs (RGB,
HDMI, AV, and Component).
Data Service
This function allows users to choose between MHEG (Digital
Teletext) and Teletext if both exist at the same time.
If only one of them exists, either MHEG or Teletext is enabled
regardless of which option you selected.
yy This feature is available in certain countries only.
DivX(R) VOD
Sets DivX related settings.
Factory Reset
All stored information is deleted and projector settings are reset.
Projector turns itself off and back on, and all settings are reset.
yy When Lock System is in place, a pop-up window appears and
asks for password.
yy Do not turn off the power during initialization.
69
CUSTOMIZING SETTINGS
OPTION 2 Settings
1 Press the SETTINGS button.
2 Use the , , , or button to select
OPTION 2
ꔂ Move ꔉ OK
yyKeystone
OPTION 2 and press the OK button.
3 Use the
, , , or button to set up the
desired item and press the OK button.
- To return to the previous menu, press the
button.
0
yyAuto Keystone
: On
yyPJT Mode
: Front
yyHigh Altitude
: Off
yyBlank Image
: Blue
yyAuto Power
: On
-
+
yySelf Diagnosis
4 Press the EXIT button when completed.
The available option 2 settings are described as follows.
Item
Description
Keystone
To prevent the screen image from becoming trapezoidal,
Keystone adjusts the top and bottom width of the image if the
projector is not set at a right angle to the screen.
Auto Keystone
Auto Keystone provides a rectangular screen image by
automatically adjusting the Keystone number when there is a
trapezoidal screen image caused by tilting of the projector.
Item
PJT Mode
On
Automatically adjusts the Keystone number.
Off
Manually adjusts the Keystone number.
This function turns the projected image upside down or flips horizontal.
yy Select Rear when projecting from the back of the transparent
screen purchased separately.
yy Select Front Ceiling when installing the product on the ceiling.
yy When PJT Mode is Rear/ Front Ceiling, the left/right of the
speaker changes automatically.
High Altitude
If the projector is used at an altitude higher than 1200 metres,
turn this on.
Otherwise, the projector may overheat or its protection function
may be activated. If this happens, turn the projector off and then
on again after waiting for several minutes.
Blank Image
Selects a background for blank Image.
70
CUSTOMIZING SETTINGS
Item
Auto Power
Description
Makes the projector turn on automatically when the adaptor plug
is inserted.
Item
On
Off
Self Diagnosis
When the AC/DC plug is connected to the
projector, it turns on automatically.
When the AC/DC plug is connected to the
projector, it goes into standby mode.
Troubleshoots functional problems that can arise while using the
product.
CONNECTING DEVICES
71
CONNECTING DEVICES
You can connect various external devices to the projector.
Computer/Notebook
DVD
Video
Digital Device
USB
Game Console
Headphones
Mobile Phone
HDMI - page 72
Component - page 73
Composite (AV) - page 73
RGB - page 75
Memory - page 31
Headphone - page 77
Mobile Phone (MHL/Slimport) - page 78
72
CONNECTING DEVICES
Connecting to HD
Receiver, DVD, or
VCR Player, External
Devices
Connect an HD receiver, DVD, VCR
player, or External Devices to the
projector and select an appropriate input
mode.
VOL -
VOL -
P
VOL +
VOL -
P
P
With an HDMI cable, you canP enjoy high
P
quality picture and sound.
Using a HDMI cable, connect the HDMI/
MHL port of the projector to the HDMI
output port of the device to connect.
Both video and audio are output at the
same time.
Press the INPUT button on the remote
control to select HDMI.
* Optional
Extras
* Optional
Extras
P
VOL +
VOL -
P
P
VOL +
VOL -
Using an HDMI to DVI cable, connect
the projector's HDMI/MHL port to the
DVI OUT port.
To output audio, use an audio cable for
connection.
Press the INPUT button on the remote
control to select HDMI.
VOL +
P
VOL +
HDMI Connection
HDMI to DVI Connection
DVI OUT
P
* Optional
Extras
+'0,
AUDIO OUT
CONNECTING DEVICES
73
AV Connection
Component Connection
Connect the output ports of an external
device and the AV IN ports of the
projector using an AV cable. Press the
INPUT button on the remote control to
select AV.
Check whether cables of the same
colour are connected properly.
You can enjoy a video by connecting the
Component port of an external device to
the RGB IN port of the projector. Press
the INPUT button on the remote control
to select Component.
Check whether cables of the same
colour are connected properly.
P
VOL +
VOL -
P
VOL -
VOL -
P
VOL +
P
P
P
P
* Optional
Extras
(Video)
* Accessories
* Accessories
(Audio)
RED
* Optional
Extras
(Video)
RED
RED
WHITE
RED
BLUE
WHITE
BLUE
GREEN
YELLOW
GREEN
RED
WHITE
YELLOW
* Optional
Extras
(Audio)
5LJKW
$8',2287
<
3%
$9287
35
/HIW
5LJKW
/HIW
5LJKW
$9287 $8',2287
$8',2287
RED
WHITE
RED
BLUE
GREEN
RED
WHITE
YELLOW
/HIW
RED
WHITE
YELLOW
* Optional
Extras
$9287
VOL +
VOL +
VOL -
P
CONNECTING DEVICES
Connecting a PC
HDMI to DVI Connection
The projector supports Plug & Play. Your
PC will automatically detect the projector
and requires no driver installation.
HDMI Connection
VOL -
VOL -
VOL +
P
VOL +
VOL -
P
P
P
P
VOL +
VOL -
VOL +
P
P
VOL +
Using an HDMI cable, connect the
HDMI/MHL port of the projector to the
HDMI output port of your PC. Both video
and audio are output at the same time.
P the remote
Press the INPUT button on
P
control to select HDMI.
Using an HDMI to DVI cable, connect
the projector's HDMI/MHL port to the
DVI OUT port.
To output audio, use an audio cable for
connection.
Press the INPUT button on the remote
control to select HDMI.
VOL -
74
P
* Optional
Extras
* Optional
Extras
* Optional
Extras
DVI OUT
+'0,
AUDIO OUT
CONNECTING DEVICES
75
RGB Connection
P
P
VOL -
VOL +
VOL +
VOL -
VOL -
P
VOL +
Connect the PC output and the PC video
input port of the projector with the RGB
P
cable.
P
For audio signal, connect the PC and
the projector with an optional audio
cable.
Press the INPUT button on the remote
control to select RGB.
P
* Accessories
* Optional
Extras
VOL +
VOL -
P
P
* Accessories
RED
WHITE
YELLOW
* Accessories
5*%2873&
RED
WHITE
* Optional
Extras
5*%2873&
$8',2287
$8',2287
You can connect the audio cable
without using a gender as shown in the
illustration above.
76
CONNECTING DEVICES
Connecting a Laptop
You can connect the projector to a
laptop to use various functions.
HDMI Connection
Using an HDMI cable, connect the
HDMI/MHL port of the projector to the
HDMI output port of your laptop. Both
video and audio are output at the same
time.
Press the INPUT button on the remote
control to select HDMI.
P
VOL -
VOL +
P
VOL +
VOL -
P
The table below shows examples
of switching the output. For more
information, refer to the External
Output, Connecting to an External
Monitor, or similar sections of the
owner's manual of your computer.
Brand
Switching Output
NEC
Fn + F3
Panasonic
Fn + F3
Toshiba
Fn + F5
IBM
Fn + F7
Sony
Fn + F7
Fujitsu
Fn + F10
LG
Fn + F7
Samsung
Fn + F4
Macintosh Adjust the control panel
to enable mirroring after
start-up.
P
* Optional
Extras
+'0,
CONNECTING DEVICES
Connecting to
Headphones
You can listen to the audio through a
headphone.
VOL +
VOL -
P
P
* Optional
Extras
77
78
CONNECTING DEVICES
Using the Mirroring Function of a Mobile Phone
MHL/Slimport Connection
You must use a HDMI adapter to connect your cell phone to the projector and to
output images and sound from your cell phone to the projector.
The compatible HDMI adapters are different, depending upon your cell phone type.
Therefore, purchase an appropriate MHL or Slimport adapter.
(To find out whether your device is MHL/Slimport-certified, please contact your device
manufacturer.)
* Optional Extras
P
P
VOL +
VOL -
NOTE
yy When you connect a mobile phone to the HDMI/MHL port, you can see the
mobile phone screen through a projector.
- This only applies to mobile phones that support MHL/Slimport.
- You can use the remote control for some applications.
yy Disconnect the MHL/Slimport cable from the projector when:
- The MHL/Slimport function is disabled.
- Your mobile device is fully charged in standby mode.
MAINTENANCE
MAINTENANCE
Clean your Projector to keep it in optimal
condition.
Cleaning
Cleaning the Lens
If there is any dust or staining on the
lens surface, you must clean the lens.
Use an air spray or a cleaning cloth to
clean the lens.
To remove dust or stains, use an
air spray or apply a small amount of
cleaning agent onto a swab or soft cloth
to lightly rub the lens.
Please be aware that liquid may flow
into the lens if the product is sprayed
directly onto the lens.
Cleaning the Projector
Case
To clean the projector case, first unplug
the power cord.
To remove dust or stains, use only a dry,
lint-free, nonabrasive cloth to polish the
lens.
Do not use alcohol, benzene, thinners,
or other chemicals, which may damage
the case.
79
80
SPECIFICATIONS
SPECIFICATIONS
MODELS
Resolution (Pixel)
Aspect ratio
Panel size (mm)
Projection distance
(Video size)
Ratio of upward
projection
Working range of the
remote control
Video input
AC-DC Adaptor
Audio Output
Television system
Programme coverage
External antenna
impedance
Height (mm)
Width (mm)
Depth (mm)
Weight (g)
USB Device
Operation
environment
PA1000T (PA1000T-EU)
1280 (Horizontal) × 800 (Vertical)
16:10 (Horizontal:Vertical)
11.623
0.90 m to 3.06 m (76.2 cm to 254.0 cm)
100 %
6m
NTSC M / PAL-B, D, G, H, I / PAL M / PAL N / PAL 60 /
SECAM
19.0 V
, 5.79 A
3W+3W
DTV – DVB-T / Analog – PAL-B/G, SECAM L
VHF: E2 to E12, UHF :E21 to E69
75 Ω
Front Side
Rear Side
Temperature
Operation
Storage
Relative Humidity
Operation
Storage
56.5 (without foot), 60.0 (with foot)
44.0 (without foot), 47.5 (with foot)
230.0
170.0
1200
5 V, 0.5 A (Max.)
0 °C to 40 °C
-20 °C to 60 °C
0 % to 80 %
0 % to 85 %
* Contents in this manual may be changed without prior notice due to upgrade of
product functions.
SPECIFICATIONS
81
Supported Monitor Display
Supported HDMI/DVI-DTV Mode
Horizontal
Resolution Frequency
(kHz)
Horizontal
Vertical
Resolution Frequency Frequency
(kHz)
(Hz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
720 x 400
31.469
70.08
640 x 480
31.469
59.94
800 x 600
37.879
60.31
1024 x 768
48.363
97.551
60.00
119.99
1152 x 864
54.348
60.053
1280 x 800
49.68
60
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1400 x 1050
65.317
59.979
1680 x 1050
65.3
60
yy If an invalid signal is input into the
projector, it will not be displayed
properly on the screen or a message
such as No Signal or Invalid Format
will be displayed.
yy The projector supports the DDC1/2B
type as the Plug & Play function
(Auto-recognition of PC monitor).
yy PC synchronization signal
types supported: Separate type
synchronization.
yy In PC mode, 1280 x 800 is
recommended for the best picture
quality.
720 x 480
31.469
31.5
59.94
60
720 x 576
31.25
50
1280 x 720
37.5
44.96
45
50
59.94
60
1920 x 1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component port connecting
information
Signal
Component
480i / 576i
o
480p / 576p
o
720p / 1080i
o
1080p
o
(50 Hz / 60 Hz only)
82
SPECIFICATIONS
Open Source Software Notice
Information
To obtain the source code under GPL,
LGPL, MPL, and other open source
licenses, that is contained in this product,
please visit http://opensource.lge.com.
In addition to the source code, all referred
license terms, warranty disclaimers
and copyright notices are available for
download.
LG Electronics will also provide open
source code to you on CD-ROM for a
charge covering the cost of performing
such distribution (such as the cost of
media, shipping, and handling) upon
email request to opensource@lge.com.
This offer is valid for three (3) years from
the date on which you purchased the
product.
The model and serial number of the projector
are located on the back or on the side of the
projector. Record them below should you ever
need service.
MODEL
SERIAL
Download PDF

advertising