LG | 24MT49DT | LG 24MT49DT-PZ Owner’s Manual

LED TV
24MT49DT / 24MT49VT
28MT49DT / 28MT49VT
AAA
X4
(M4 X L10)
X2
(M4 x L14)
28MT49*
www.lg.com
*MFL69713406*
Depending on country / Në varësi të shtetit / В зависимост от страната / Ovisno o zemlji / Závisí na zemi /
Zavisno od zemlje / Afhankelijk van het land / En función del país / Sõltub riigist / Selon les pays /
Abhängig vom Land / Ανάλογα με τη χώρα / A seconda del Paese / Елге байланысты / Atkarīgs no valsts /
Priklausomai nuo šalies / Во зависност од земјата / Országfüggő / Zależnie od kraju / Dependendo do país /
În funcţie de ţară / В зависимости от страны / Závisí od krajiny / Odvisno od države / Залежно від країни /
Mamlakatga bog’liq ravishda /
/ Ülkeye bağlı
P/No: MFL69713406 (1703-REV01)
Printed in Korea
English
Read Safety and Reference.
Latviešu
Izlasiet Drošībai un uzziņai.
Shqip
Lexo Siguria dhe referencat.
Lietuvių k.
Perskaitykite „Saugumas ir nuorodos“.
Български
Прочетете Безопасност и справки.
Македонски
Hrvatski
Pročitajte Sigurnost i reference.
Прочитајте во Безбедносни информации и
референтни материјали.
Česky
Přečtěte si část Bezpečnost a
reference.
Magyar
Lásd: Biztonsági óvintézkedések.
Polski
Srpski
Pročitajte Bezbednost i informacije.
Przeczytaj Zasady bezpieczeństwa i
informacje dodatkowe.
Nederlands
Lees Veiligheid en referentie goed door.
Português
Consulte o manual Segurança e Referência.
Español
Leer Seguridad y Referencias.
Română
Citiţi Siguranţă şi referinţe.
Eesti
Lugege Ohutus ja viited.
Русский
Français
Lire le document Sécurité et référence.
Прочитайте Руководство по технике
безопасности.
Deutsch
Sicherheitshinweise und Referenzen
lesen.
Slovenčina
Prečítajte si časť Bezpečnosť a odkazy.
Slovenščina
Preberite Varnostne informacije in napotki.
Ελληνικά
Ανάγνωση Ασφάλεια και αναφορά.
Українська
Italiano
Leggere Sicurezza e informazioni di
riferimento.
Прочитайте Правила безпеки та довідкова
інформація.
O’zbekcha
Қазақша
Қауіпсіздік нұсқаулық бөлімін
оқыңыз.
Xavfsizlik bo’yicha ko’rs
atmalar va havolalarni o’qing.
Türkçe
Güvenlik ve Referans bölümünü
okuyun.
1-A 24MT49*
2
1-B 28MT49*
b
▲ PCMCIA ▲
CARD SLOT
A
USB IN
5V
0.5 A
A
DC-IN
(19 V
b-1
b
)
ANTENNA
/CABLE IN
MT49DT
A
HDMI OUT
HDMI IN
DC-IN
(19 V
)
ANTENNA
/CABLE IN
b-2
b
MT49VT
A
HDMI OUT
13/18 V
700 mA Max
LNB IN
Satellite
HDMI IN
DC-IN
(19 V
)
ANTENNA
/CABLE IN
DC-IN
(19 V )
3
2
DC-IN
(19V
)
1
2
1
DC-IN
(19V
)
Depending on country
1
2
3
4
OWNER’S MANUAL
Safety and Reference
LED TV*
*Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and retain it for future
reference.
MT49*
www.lg.com
Table of contents
Licenses--------------------------------------------3
ENG
ENGLISH
Open source software notice
information---------------------------------------3
Preparing------------------------------------------3
Lifting and moving the TV--------------------4
Setting up the TV--------------------------------4
Using the joystick button---------------------4
Mounting on a table----------------------------5
Mounting on a wall-----------------------------6
Connections (notifications)------------------7
Remote control----------------------------------8
Settings------------------------------------------ 10
To see web manual---------------------------- 15
Maintenance------------------------------------ 16
Troubleshooting------------------------------ 16
Specifications---------------------------------- 17
2
Licenses
Supported licenses may differ by model. For more information
about licenses, visit www.lg.com.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, first register your device at
vod.divx.com. Find your registration code in the DivX VOD section of
your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by DivX Patents 7,295,673; 7,515,710; RE45,052; and
others available at [www.divx.com/patents]
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open
source licenses, that is contained in this product, please visit
http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the
date on which you purchased the product.
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
yy The available menus and options may differ from the input
source or product model that you are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the
power consumption. And the TV should be turned off if it
will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced
if the level of brightness of the picture is reduced, and this will
reduce the overall running cost.
yy The items supplied with your product may vary depending on
the model.
yy Product specifications or contents of this manual may be
changed without prior notice due to upgrade of product
functions.
yy For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
ENGLISH
ENG
Manufactured under license from Dolby Laboratories. Dolby, Dolby
Vision, Dolby Audio, and the double-D symbol are trademarks of
Dolby Laboratories.
Preparing
*A <
= 10 mm
*B <
= 18 mm
yy Use a certified cable with the HDMI logo attached. If you do
not use a certified HDMI cable, the screen may not display or a
connection error may occur.
yy Recommended HDMI cable types
- High-Speed HDMI®/™ cable
- High-Speed HDMI®/™ cable with Ethernet
CAUTION
yy Do not use any unapproved items to ensure the safety and
product life span.
yy Any damage or injuries caused by using unapproved items are
not covered by the warranty.
yy Some models have a thin film attached on to the screen and this
must not be removed.
3
Lifting and moving the TV
ENG
ENGLISH
Please note the following advice to prevent the TV from being
scratched or damaged and for safe transportation regardless of its
type and size.
yy It is recommended to move the TV in the box or packing material
that the TV originally came in.
yy Before moving or lifting the TV, disconnect the power cord and
all cables.
yy When holding the TV, the screen should face away from you to
avoid damage.
Setting up the TV
CAUTION
yy When attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen
from scratches.
yy Do not carry the TV upside-down by holding the stand body (or
stand base) as this may cause it to fall off, resulting in damage
or injury.
yy Do not apply foreign substances (oils, lubricants, etc.) to the
screw parts when assembling the product. (Doing so may
damage the product.)
NOTE
yy Lift up the latch at the bottom of the stand base and detach the
stand base from the TV. (Only MT49*F, MT49*W, MT49U)
yy Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse. (Only MT49*T)
yy Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
Using the joystick button
You can simply operate the TV functions, pressing or moving the
button.
Joystick button
yy When transporting the TV, do not expose the TV to jolts or
excessive vibration.
yy When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
yy Do not apply excessive pressure to cause flexing/bending of
frame chassis as it may damage screen.
CAUTION
yy Avoid touching the screen at all times, as this may result in
damage to the screen.
yy When handling the TV, be careful not to damage the protruding
joystick button. (Depending on model)
Basic functions
Power On (Press)
Power Off (Press and hold)1
Volume Control
Programmes Control
1 If the menu button is on the screen, pressing and holding the
button will let you exit the menu.
4
Adjusting the menu
Using the kensington security system
When the TV is turned on, press the joystick button one time. You
can adjust the menu items pressing or moving the buttons.
(This is not available for all models.)
Accesses the setting menu.
yy Image shown may differ from your TV.
The Kensington security system connector is located at the rear of
the TV. For more information of installation and using, refer to the
manual provided with the Kensington security system or visit
http://www.kensington.com. Connect the Kensington security
system cable between the TV and a table.
ENGLISH
ENG
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
NOTE
yy If you press the joystick button first, you may not be able to adjust
the volume level and saved programmes.
CAUTION
yy When your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button.
Mounting on a table
yy Image shown may differ from your TV.
1 Lift and tilt the TV into its upright position on a table. -- Leave a 100 mm (minimum) space from the wall for proper
ventilation.
NOTE
yy The Kensington security system is optional. You can obtain
additional accessories from most electronics stores.
100 mm
100 mm
100 mm
100 mm
2 Connect the AC-DC Adapter and power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources of heat, as this may result
in fire or other damage.
yy Please be sure to connect the TV to the AC/DC power adapter
before connecting the TV’s power plug to a wall power outlet.
5
Mounting on a wall
ENG
ENGLISH
For proper ventilation, allow a clearance of 100 mm on each side and
from the wall. Detailed installation instructions are available from
your dealer, see the optional Tilt Wall Mounting Bracket Installation
and Setup Guide.
100 mm
100 mm
100 mm
100 mm
If you intend to mount the TV to a wall, attach Wall mounting
interface (optional parts) to the back of the TV.
When you install the TV using the wall mounting interface (optional
parts), attach it carefully so it will not drop.
1 If you use screw longer than standard, the TV might be
damaged internally.
2 If you use improper screw, the product might be damaged and
drop from mounted position. In this case, LG Electronics is not
responsible for it.
Separate purchase (Wall mounting
bracket)
Model
22/24MT49*
Wall mount (A x B) (mm)
A
B
Standard screw
Number of screws
Wall mount bracket
(optional)
6
75 x 75
M4 x L10
4
RW120
28/29MT49*
CAUTION
yy Must use the enclosed screw in the box. (Depending on model)
yy Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
yy If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury.
yy Use an authorized LG wall mount and contact the local dealer or
qualified personnel.
yy Do not over tighten the screws as this may cause damage to the
TV and void your warranty.
yy Use the screws and wall mounts that meet the VESA standard. Any
damages or injuries by misuse or using an improper accessory are
not covered by the warranty.
yy Screw length from outer surface of back cover should be under
8 mm.
Wall mount Pad
Back Cover
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max.8 mm
100 x 100
NOTE
yy Use the screws that are listed on the VESA standard screw
specifications.
yy The wall mount kit includes an installation manual and necessary
parts.
yy The wall mount bracket is optional. You can obtain additional
accessories from your local dealer.
yy The length of screws may differ depending on the wall mount. Be
sure to use the proper length.
yy For more information, refer to the instructions supplied with the
wall mount.
Connections (notifications)
NOTE
yy The external device connection may differ from the model.
yy Connect external devices to the TV regardless of the order of the
TV port.
yy If you record a TV programme on a DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
yy Refer to the external equipment’s manual for operating
instructions.
yy If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
yy In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the Picture
menu until the picture is clear.
yy In PC mode, some resolution settings may not work properly
depending on the graphics card.
Satellite dish connection
(Only satellite models)
Connect the TV to a satellite dish to a satellite socket with a satellite
RF cable (75 Ω).
ENGLISH
ENG
Connect various external devices to the TV and switch input modes
to select an external device. For more information about an external
device’s connection, refer to the manual supplied with each device.
Available external devices are: HD receivers, DVD players, VCRs,
audio systems, USB storage devices, PC, gaming devices, and other
external devices.
CI module connection
(Depending on model)
View the encrypted (pay) services in digital TV mode.
yy Check if the CI module is inserted into the PCMCIA card slot in the
right direction. If the module is not inserted properly, this can
cause damage to the TV and the PCMCIA card slot.
yy If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
yy USB port supports 0.5 A electric current. If you need more electric
current in case of HDD, use the separate power adaptor.
NOTE
yy Supported HDMI Audio format :
Dolby Digital / Dolby Digital Plus (32 KHz, 44.1 KHz, 48 KHz),
PCM (32 KHz, 44.1 KHz, 48 KHz, 96 KHz, 192 KHz)
(Depending on model)
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal amplifier properly to
improve the image quality.
yy If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
yy An antenna cable and converter are not supplied.
yy Supported DTV Audio : MPEG, Dolby Digital, Dolby Digital Plus,
HE-AAC
7
Connecting to a PC
Remote control
ENG
ENGLISH
yy Image shown may differ from your TV.
Your TV supports the Plug and Play* feature and has the built-in
speakers with Virtual Surround that reproduces sound clearly with
a rich bass.
* Plug and Play : The function when a PC recognizes a connected
device that users connect to a PC and turn on, without device
configuration or user intervention.
The descriptions in this manual are based on the buttons on the
remote control. Please read this manual carefully and use the TV
correctly.
To replace batteries, open the batteryhri^Z`^\^_]
cover, replace batteries
(1.5 V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
NOTE
yy If you want to use HDMI-PC mode, you must set the Input Label
to PC mode.
yy The OSD (On Screen Display) is displayed on the screen as shown
below.
»» When turning the product on in HDMI input.
»» When switching to HDMI input.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote
control.
yy The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control
sensor on the TV.
Is the input connected to your PC?
Do not show message again
A
YES
NO
yy If you select "Yes" the size and image quality are optimised for
your PC.
yy If you select "No" the size and image quality are optimised for the
AV device (DVD player, set-top box).
yy If you select "Do not show message again" this message does
not appear until the TV is reset. You can change the set value in
(Home) Inputs Input Label.
B
(Power) Turns the TV on or off.
Selects Radio, TV and DTV programme.
Recalls your preferred subtitle in digital mode.
Turns the PIP mode on or off. (Depending on model)
Audio descriptions function will be enabled.
Selects TV or PC mode.
(Inputs) Changes the input source.
8
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
Adjusts the volume level.
Accesses your favourite programme list.
Shows programme guide.
(Mute) Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
ENGLISH
ENG
Views the information of the current programme and
screen.
Not functional.
(Control buttons) Controls media contents.
,
, ,
These access special functions in some menus.
(Gaming Mode) Turns the gaming mode on or off.
(Backlight) Adjusts the brightness of the screen by
controlling the screen backlight.
C
NOTE
yy On MHEG programme, you cannot adjust the backlight with the
yellow or blue key.
D
Teletext buttons (
) These buttons are used for
teletext.
(Home) Accesses the home menu.
(Settings) Accesses the settings menu.
Accesses the quick menus.
(Navigation buttons) Scrolls through menus or
options.
Selects menus or options and confirms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
9
Settings
Automatically Setting Up Programme
ENG
ENGLISH
(Settings) Programmes Auto Tuning
Automatically tunes the programmes.
yy If Input Source is not connected properly, programme registration
may not work.
yy Auto Tuning only finds programmes that are currently
broadcasting.
yy If Lock System is turned on, a pop-up window will appear asking
for password.
To select Picture Mode
(Settings) Picture Picture Mode Settings
Picture Mode
Select the picture mode optimized for the viewing environment or
the programme.
yy Vivid : Heightens contrast, brightness and sharpness to display
vivid images.
yy Standard : Displays images in standard levels of contrast,
brightness and sharpness.
yy Eco/APS: [Depending on model]
The Energy Saver feature changes settings on the TV to reduce
power consumption.
yy Cinema/Game : Displays the optimum picture for movie, game.
yy Sports : [Depending on model]
Optimised picture mode for sport. The pitch and kits are presented
in vibrant colours, with crystal-clear images even for fast
movements.
Expert1, 2 : Menu for adjusting picture quality that
allows experts and amateurs to enjoy the best TV viewing. This
is the adjustment menu provided for ISF-certified picture tuning
professionals. (ISF logo can only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation Certified Calibration Control
yy Depending on input signal, available range of picture modes
may differ.
yy
Expert mode is for picture tuning professionals to control
and fine-tune using a specific image. For normal images, the
effects may not be dramatic.
yy The ISF function is only available on some models.
yy Changing Picture Mode may modify Energy Saving and
Motion Eye Care settings, which can also affect energy
consumption.
yy
10
Fine-tuning Picture Mode
(Settings) Picture Picture Mode Settings
This feature allows you to adjust the selected picture mode in detail.
yy Backlight : Controls the level of screen brightness by adjusting
the backlight. The closer to 100, the brighter the screen.
yy Contrast : Adjusts the contrast of the bright and dark areas of the
picture. The closer to 100, the higher the contrast.
yy Brightness : Adjusts the overall screen brightness. The closer to
100, the brighter the screen.
yy Sharpness : Adjusts the sharpness of the image. The closer to 50,
the sharper and clearer the image.
yy Colour : Tones down or up the colours displayed on the screen.
The closer to 100, the deeper the colour.
yy Tint : Adjusts the colour balance between red and green
displayed on the screen. The closer to Red 50, the more red the
colour will be. The closer to Green 50, the more green the colour
will be.
yy Colour Temperature : Adjusts the colour temperature from cold
to warm.
yy Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To set advanced control
(Settings) Picture Picture Mode Settings
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or adjusts picture
settings for a special screen.
yy Dynamic Contrast : Adjusts the contrast to the optimal level
according to the brightness of the image.
yy Dynamic Colour : Adjusts colours to make the image appear in
more natural colours.
yy Preferred Colour : Adjust the colours of skin, grass and sky to
your personal preferences.
yy Gamma : Sets the gradation curve according to the output of
picture signal in relation to the input signal.
yy Colour Gamut : Selects the range of colours that can be
expressed.
yy Edge Enhancer : Shows clearer and distinctive yet natural edges
of the video.
yy Colour Filter : Filters a specific colour spectrum in RGB colours to
fine-tune colour saturation and hue accurately.
yy White Balance : Adjusts the overall tone of the screen as desired.
yy Colour Management System : This is a system that experts use
when they adjust colour with a test pattern. They can select from
six colour areas (Red / Green / Blue / Cyan / Magenta / Yellow)
without affecting other colours. For normal images, adjustments
may not result in noticeable colour changes.
yy Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
To use Energy Saving feature
(Settings) Picture Picture Mode Settings
Picture Options
Adjusts detailed setting for images.
yy Noise Reduction : Eliminates noise in the picture.
yy MPEG Noise Reduction : Eliminates noise generated while
creating digital picture signals.
yy Black Level : Adjusts the brightness and contrast of the screen
to suit the black level of the input picture by using the blackness
(black level) of the screen.
yy Real Cinema : Optimizes the screen for movie viewing.
yy Motion Eye Care : Automatically adjusts brightness and reduces
image blur based on image data to reduce eyestrain.
yy Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
(Settings) Picture
Energy Saving
Reduces power consumption by adjusting screen brightness.
yy Off : Turns off the Energy Saving mode.
yy Minimum / Medium / Maximum : Applies the pre-set Energy
Saving mode.
yy Screen Off : Screen is turned off and only sound is played. Press
any button except Power button on the remote control to turn the
screen back on.
yy Depending on the Energy Saving (Maximum), you may not be
able to adjust the Backlight.
In this case, navigate to (Settings) Picture
Energy Saving and set to Off or Minimum.
Resetting picture settings
(Settings) Picture Picture Mode Settings
Picture Reset
Resets picture settings that the user customizes. Each picture mode
is reset. Select the picture mode you wish to reset.
To use Gaming Mode
(Settings) Picture Gaming Mode
[Available only for RGB/HDMI-PC]
This mode allows you to optimize the picture quality for games.
yy DAS Mode : [Depending on model]
This mode minimizes the time taken to display the video signal
received from the input device to ensure faster gameplay.
(The screen will flicker when turning DAS Mode On or Off.)
-- DAS : Dynamic Action Sync
yy Black Stabilizer : Objects can be seen more clearly on a dark
screen by adjusting the black levels. Increasing the Black
Stabilizer value brightens the low gray levels on the screen. (You
can easily distinguish objects on a dark game screen.) Reducing
the Black Stabilizer value darkens the low gray levels and
increases the dynamic contrast on the screen.
-- You can configure the detailed settings for Gaming Mode
using the key on the remote control.
-- You can set DAS Mode only when the frequency for vertical
input is 50 Hz/60 Hz.
-- When PIP is turned on, the DAS Mode is unavailable.
(Depending on model)
ENGLISH
ENG
To set additional picture options
To use Eye Comfort Mode feature
(Settings) Picture Eye Comfort Mode
If you turn this option on, colour temperature will be automatically
adjusted to reduce eye strain.
yy On : Automatically adjusts the screen color temperature.
yy Off : Turns off the Eye Comfort Mode.
Selecting Sound Mode
(Settings) Sound Sound Mode Settings
Sound Mode
Adjusts TV audio to an optimal level based on a selected sound
mode.
yy Standard : Optimizes the sound for all types of content.
yy Clear Voice : Boosts voice clarity from the TV.
yy Music : [Depending on model] Optimizes the sound for music.
yy Cinema : Optimizes the sound for cinemas.
yy Sports : [Depending on model] Optimizes the sound for sports.
yy Game : Optimizes the sound for gameplay.
Adjusting audio balance
(Settings) Sound Sound Mode Settings
Balance
Adjust the volume of the left and right speakers.
Using the Sound Effect function
(Settings) Sound Sound Mode Settings
The user can select various sound effects.
yy Virtual Surround : Enjoy an immersive soundscape with the
virtual multi-channel surround sound effect.
yy Equalizer : Set the desired sound by adjusting the equalizer
directly.
yy Reset : Reset the sound effect settings.
yy This is only available if Sound Mode is set to Standard.
11
To synchronize audio and video
ENG
ENGLISH
(Settings) Sound AV Sync Adjustment
[Depending on model]
Synchronizes video and audio directly when they do not match.
If you set AV Sync Adjustment to On, you can adjust the sound
output (TV speakers) to the screen image.
yy If you select the Bypass, Outputs the broadcast signals or the
sound from external devices without any audio delay. The audio
may be output before the video because of the time the TV takes
to process the video input.
PIP Setting
(Settings) General PIP
[Depending on model]
yy Mode : Shows or hides the sub-screen.
yy Sub Input : Select the input on the sub-screen.
yy Position : Adjusts the position of the sub-screen.
yy Size : Adjusts the size of the sub-screen.
yy Sound : Switches to the main screen sound or the sub screen
sound.
yy The PIP function is only available in the following mode:
- Main : RGB-PC
Sub : DTV / ATV / HDMI
- Main : HDMI
Sub : DTV / ATV / Component
.
yy The PIP settings can also be set using
yy Press the PIP button on the remote control to show or hide the
sub-screen.
yy The PIP function is not available when SIMPLINK is activated.
Setting USB AutoRun
(Settings) General USB AutoRun
Play photos or videos of USB automatically when TV is turned on or
USB is connected.
yy Off : Turn off the USB AutoRun.
yy Videos : Play videos of USB automatically.
yy Photos : Play photos of USB automatically.
yy Only plays the files in the top level folder of the USB device in
sequence.
or
button on the remote
yy While playing, press the
control to end this function.
yy If the files are invalid or corrupted, the following message appears
before returning to the previous input status: "This file is invalid."
yy When the USB device is reconnected after being disconnected
during video playback, Continue watching starts automatically
and resumes the video from the last viewed scene (only applies
to the first video).
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to control and manage
various multimedia devices conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the SIMPLINK device’s
HDMI output terminal using an HDMI cable.
2 Select (Settings) General SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK function to On.
4 Configure the Auto Power Sync settings to On or Off.
5 In SIMPLINK menu window, selects the device you want to
control.
(Home) Inputs
yy You can also set the SIMPLINK in
SIMPLINK.
yy This function is only compatible with devices with the SIMPLINK
logo.
yy To use the SIMPLINK function, you need to use a high-speed
HDMI® cable (with CEC (Consumer Electronics Control) feature
added). High-speed HDMI® cables have the No. 13 pin connected
for information exchange between devices.
yy If you switch to another input, the SIMPLINK device will stop.
yy If a third-party device with the HDMI-CEC function is also used,
the SIMPLINK device may not work normally.
yy If you select or play media from a the device with a home theatre
function, the HT Speaker is automatically connected.
12
To set password
(Settings) Safety Set Password
Sets or changes the TV password.
yy The initial password is set to ‘0000’.
yy When France is selected for Country, password is not ‘0000’ but
‘1234’.
yy When France is selected for Country, password cannot be set to
‘0000’.
To return Reset to Initial Settings
(Settings) General Reset to Initial Settings
All stored information is deleted and TV settings are reset.
The TV turns itself off and back on, and all settings are reset.
yy When Lock System is in place, a pop-up window appears and
asks for password.
yy Do not turn off the power during initialization.
Using a USB storage device - warning
yy If the USB storage device has a built-in auto recognition program
or uses its own driver, it may not work.
yy Some USB storage devices may not work or may work incorrectly.
yy Use only USB storage devices formatted with the Windows FAT32
or NTFS File System.
yy For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 500 mA.
yy It is recommended that you use USB memory sticks of 32 GB or
less and USB HDDs of 2 TB or less.
yy If a USB HDD with power-saving function does not work properly,
turn the power off and on. For more information, refer to the user
manual of the USB HDD.
yy Data in the USB storage device can be damaged, so be sure to
back up important files to other devices. Data maintenance is the
user’s responsibility and the manufacturer is not responsible for
data loss.
ENGLISH
ENG
SIMPLINK function description
yy Direct Play : Plays the multimedia device on the TV instantly.
yy Controlling devices with the TV remote control : Manages
the multimedia device with the TV remote control.
yy Main Power Off : If Auto Power Sync is set to On in the
SIMPLINK settings and turn off your TV, the devices connected to
your TV via SIMPLINK will also be turned off.
yy Main Power On : If Auto Power Sync is set to On in the
SIMPLINK settings, turning on a SIMPLINK-linked device will turn
the TV on. (Behavior may vary depending on connected device.)
My Media supporting file
yy Maximum data transfer rate: 20 Mbps (Mega bit per second)
yy External supported subtitle formats : *.smi, *.srt, *.sub
(MicroDVD, SubViewer1.0/2.0), *.ass, *.ssa, *.txt (TMplayer),
*.psb (PowerDivX)
yy Internal supported subtitle formats: XSUB (Supports internal
subtitles generated from DivX6)
To remove the USB device
(Home) Inputs and
Select the connected USB HDD from
select the Eject button to disconnect the USB HDD storage device.
When you see a message that the USB device has been removed,
separate the device from the TV.
yy Once a USB device has been selected for removal, it can no longer
be read. Remove the USB storage device and then re-connect it.
13
ENG
ENGLISH
Supported Video Formats
yy Maximum : 1920 x 1080 @ 30p (Only Motion JPEG 640 x 480 @
30p)
yy .asf, .wmv
[Video] MPEG-4 Part2, XViD, H.264/AVC, VC1(WMV3, WVC1),
MP43
[Audio] WMA Standard, WMA9(Pro), MP3, AAC, AC3
yy .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG- 1 Layer I,
MPEG-1 Layer II, Dolby Digital, MPEG-1 Layer III (MP3)
yy .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, H.265/HEVC
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, MPEG-1 Layer III (MP3),
Dolby Digital, Dolby Digital Plus, AAC, HE-AAC
yy .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I, MPEG- 1 Layer II,
DVD-LPCM
yy .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11, DivX4, DivX5, DivX6,
XViD, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3)
yy .mkv
[Video] MPEG-2, MPEG-4 Part2, XViD, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1 Layer III (MP3), LPCM
yy motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
yy .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II, Dolby Digital, LPCM
yy .dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
yy .flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
yy .3gp
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
14
Supported Audio Formats
yy File type : mp3
[Bit rate] 32 Kbps ~ 320 Kbps
[Sample freq.] 16 kHz ~ 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
yy File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
yy File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
yy File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
yy File Type : WMA10 Pro
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA10 Pro
yy File Type : OGG
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] OGG Vorbis
yy File Type : WAV
[Bit rate] 64 kbps ~ 1.5 Mbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] LPCM
[Bit depth] 8 bit / 16 bit / 24 bit
ENGLISH
ENG
Supported Photo Formats
yy Category : 2D (jpeg, jpg, jpe)
[Available file type]
SOF0 : Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size]
Minimum : 64 x 64,
Maximum (Normal Type) : 15360 x 8640,
Maximum (Progressive Type) : 1920 x 1440
yy Category : BMP
[Photo size] Minimum : 64 x 64, Maximum : 9600 x 6400
yy Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size]
Minimum : 64 x 64,
Maximum (Interlace) : 1200 x 800,
Maximum (Non-Interlace) : 9600 x 6400
yy BMP and PNG format files may be slower to display than JPEG.
To see web manual
To obtain detailed User Guide information, please visit www.lg.com.
15
Maintenance
Troubleshooting
Cleaning your TV
Cannot control the TV with the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote
control.
yy Check if the batteries are still working and properly installed
( to , to ).
No image display and no sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
yy Check the power control settings. The power supply may be
interrupted.
yy Check if the Auto Power Off (Depending on model) /
Sleep Timer / Timer Power Off feature is activated in the
Timers settings.
yy If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the PC (HDMI), 'No Signal', 'Check signal
cable' or ‘Unsupported Format’ is displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
If TV is turned off automatically.
yy If Timer Power On is enabled, the TV will be turned on at the
specified time. If you do not operate the TV for two hours, the TV
will be turned off automatically.
yy To disable this function, use your remote control to go to
(Settings) Timers Timer Power On 2 Hours Auto
Power Off Off.
ENG
ENGLISH
Clean your TV regularly to keep the best performance and to extend
the product lifespan.
yy Make sure to turn the power off and disconnect the power cord
and all other cables first.
yy When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent
possible damage from lightning or power surges.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened
in clean water or a diluted mild detergent. Then wipe immediately
with a dry cloth.
yy Avoid touching the screen at all times, as this may result in
damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a
sharp object, as this may result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may
result in fire, electric shock, or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
Preventing “Image burn” or “Burn-in” on
your TV screen
yy If a fixed image displays on the TV screen for a long period of time,
it will be imprinted and become a permanent disfigurement on
the screen. This is “image burn” or “burn-in” and not covered by
the warranty.
yy If the aspect ratio of the TV is set to 4:3 for a long period of time,
image burn may occur on the letterboxed area of the screen.
yy Avoid displaying a fixed image on the TV screen for a long period
of time (2 or more hours for LCD) to prevent image burn.
16
Specifications
Product specifications may be changed without prior notice due to upgrade of product functions.
Dimensions (W x H x D) (mm)
22MT49DF
22MT49VF
24MT49DF
24MT49VF
24MT49VW
24MT49U
24MT49DT
24MT49VT
28MT49DF
28MT49VF
28MT49VW
28MT49U
28MT49DT
28MT49VT
29MT49DF
29MT49VF
Power
consumption
(Outgoing
condition)
Power
requirement
With stand
Without stand
With stand
Without stand
507.6 x 358.0 x 146.3
507.6 x 316.5 x 52.7
3.0
2.9
26 W
19 V
1.6 A
556 x 392.7 x 143.4
556 x 345.2 x 54.7
3.5
3.2
28 W
19 V
1.6 A
556 x 376.5 x 130.5
556 x 345.2 x 54.7
3.3
3.2
28 W
19 V
1.6 A
641.5 x 444.0 x 178.8
641.5 x 396.3 x 59.5
5.0
4.5
28 W
19 V
1.6 A
641.5 x 428.7 x 159.2
641.5 x 396.3 x 59.5
4.6
4.5
28 W
19 V
1.6 A
665.8 x 444.5 x 186.1
665.8 x 405.5 x 61.4
4.8
4.6
33 W
19 V
2.0 A
AC/DC Adapter
22/24/28MT49*
29MT49*
Manufacturer : Lien Chang
Model : LCAP16A-E, LCAP21A
Manufacturer : Honor
Model : ADS-40FSG-19 19032GPG,
ADS-40SG-19-3 19032G
Manufacturer : Lien Chang
Model : LCAP16B-E, LCAP21C
Manufacturer : Honor
Model : ADS-45FSN-19 19040GPG,
ADS-45SN-19-3 19040G
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V
1.7 A
In : AC 100 – 240 V ~ 50/60 Hz
Out : DC 19 V
2.1 A
CI module Size (W x H x D)
Environment
condition
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
ENGLISH
ENG
Models
Weight (kg)
100.0 mm x 55.0 mm x 5.0 mm
0 °C to 40 °C
Less than 80 %
-20 °C to 60 °C
Less than 85 %
17
(Depending on country)
Satellite
ENG
ENGLISH
Television system
DVB-S/S2*
Channel coverage
(Band)
950 ~ 2150 Mhz
Maximum number of
storable programmes
6000
External antenna impedance
* Only DVB-T2/C/S2 support models.
18
Digital TV
Terrestrial
DVB-T
DVB-T2*
VHF III : 174 ~ 230 Mhz
UHF IV : 470 ~ 606 Mhz
UHF V : 606 ~ 862 Mhz
S Band II : 230 ~ 300 Mhz
S Band III : 300 ~ 470 Mhz
Cable
DVB-C
46 ~ 890 Mhz
2000
75 Ω
Analogue TV
Terrestrial / Cable
PAL/SECAM B/G, D/K, I,
SECAM L
46 ~ 862 Mhz
HDMI-PC supported mode
HDMI-DTV supported mode
24/28/29MT49*
Resolution
Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 400
31.468
70.080
31.469
37.500
37.879
46.875
48.363
60.023
59.940
75.000
60.317
75.000
60.004
75.029
1280 x 800
49.702
59.810
1366 x 768
47.717
59.790
Resolution
Horizontal
frequency(kHz)
Vertical
frequency(Hz)
720 x 400
31.468
70.080
31.469
37.500
37.879
46.875
48.363
56.476
60.023
59.940
75.000
60.317
75.000
60.004
70.069
75.029
1152 x 864
67.500
75.000
1280 x 720
45.000
60.000
1280 x 800
49.702
59.810
1280 x 1024
63.981
79.976
60.020
75.025
1400 x 1050
65.317
59.978
1440 x 900
55.935
59.887
1600 x 900
60.000
60.000
1680 x 1050
64.674
65.290
59.883
59.954
1920 x 1080
67.500
60.000
640 x 480
800 x 600
1024 x 768
22MT49*
640 x 480
800 x 600
1024 x 768
720 x 480
720 x 576
1280 x 720
1920 x 1080
Vertical
frequency(Hz)
59.940
60.000
50.000
37.500
44.960
45.000
33.720
33.750
28.125
27.000
33.750
56.250
67.430
67.500
50.000
59.940
60.000
59.940
60.000
50.000
24.000
30.000
50.000
59.940
60.000
ENGLISH
ENG
Resolution
Horizontal
frequency(kHz)
31.469
31.500
31.250
NOTE
yy The optimal display resolution
- 24/28/29MT49* : 1366 x 768 @ 60 Hz.
- 22MT49* : 1920 x 1080 @ 60 Hz.
yy The optimal timing in each mode is vertical frequency 60 Hz.
19
ENG
ENGLISH
WARNING!
Never place a television set in an unstable location. A television set
may fall, causing serious personal injury or death. Many injuries,
particularly to children, can be avoided by taking simple precautions
such as:
yy Using cabinets or stands recommended by the manufacturer of
the television set.
yy Only using furniture that can safely support the television set.
yy Ensuring the television set is not overhanging the edge of the
supporting furniture.
yy Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture
and the television set to a suitable support.
yy Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
yy Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the
same considerations as above should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to “ON” (power).
Refers to dangerous voltage.
20
Record the model number and serial number
of the TV.
Refer to the label on the back cover and
quote this information to your dealer when
requiring any service.
MODEL
SERIAL
Download PDF