LG | L172WT | LG L172WT Owner’s Manual

Table of Contents
Installation
and
Connection
Safety
A1
Precautions
A4
Accessories
Important
Name and Function of the Parts
A15
Watching
Video / DVD
A17
Watching
TV
A19
Name of the Buttons in the
and
Tracking
Miscellaneous
A15
to your PC
Connecting
Selection
A7
to External Devices
Connecting
Input
A6
Monitor Features
OSD
screen
Adjustment Unit
(On Screen Display) Screen Tracking
Order
A23
Adjusting
Screen when
Adjusting
Screen Color
A26
Adjusting
the audio function
A27
Adjusting
PIP/POP/PBP Mode Functions
A28
Selecting
the
A30
Adjusting
Screen Clock/Phase and Position
using
VCR/DVD/TV
A20
Options
A24
A31
Troubleshooting
A32
Product
A35
Specifications
is
a
trademark of SRS Labs,Inc.
is incorporated under license from SRS Labs,Inc.
technology
i
ENGLISH
Precautions
Safety
safety precautions carefully before using
Please read these
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
ignore the caution message, you
Precautions in
installing
seriously injured
may be slightly
or
the monitor.
there is
a
possibility
of
injured or the product may be damaged
the Monitor
Warning
Keep away from
-
heat
Electrical shock,
Keep the packing
-
like electrical heaters.
or
deformation may
anti-moisture material
occur.
vinyl packing out of the reach of children.
by mistake, force the patient to vomit and visit the
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
Anti-moisture material is harmful if swallowed. If swallowed
nearest
Do not
-
sources
fire, malfunction
put heavy objects on the monitor or sit upon it.
collapses or is dropped, you may be injured.
If the monitor
Children must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the monitor in
-
Dust
or
moisture
neat and
a
can cause
If you can smell smoke
service center.
-
If you continue to
use
or
injury.
dry place.
electrical shock, fire
other odors
without
or
taking
or
hear
or
a
product damage.
strange
sound
unplug the power cord
proper measures, electrical shock
or
fire
and contact the
can occur.
If you dropped the monitor or the case is broken, turn off the monitor and unplug the power cord.
If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
-
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the monitor, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the monitor, unplug the power cord and
-
contact the service center.
Caution
Make
sure
the monitor ventilation hole is not blocked. Install the monitor in
than 10cm from the
-
If you install the monitor too close to the wall, it may be deformed
Do not block the ventilation hole of the monitor
-
The monitor
can
be deformed
Install the monitor
-
If the monitor is
on a
-
or
fire
can
suitably wide place (more
you may be
no
EMI
fire
can
break out due to internal heat.
by a tablecloth or curtain.
overheating inside the monitor.
place that has no risk of dropping
injured or the monitor may be broken.
occurs.
monitor away from direct
can be damaged.
or
break out due to
flat and stable
dropped,
Install the monitor where
Keep the
a
wall)
sunlight.
The monitor
A1
the monitor.
ENGLISH
Electrical Power Related Precautions
Warning
Make
-
sure
to connect the power cable to the
You may be electrocuted
Use the rated
-
The monitor
During
-
a
or
voltage only.
be damaged,
can
thunder
or
grounded
current.
injured.
or
you may be electrocuted.
lightning storm, unplug the power cable or signal
You may be electrocuted
or a
fire
can
Do not connect several extension
cable.
break out.
cords,
electrical
appliances
power bar with a grounding terminal designed for exclusive
A fire can break out due to overheating.
electrical heaters to
or
with the
use
a
single
outlet. Use
computer.
-
Do not touch the power plug with wet hands. Additionally, it the cord
the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
pin
is wet
or
covered with
dust, dry
-
If you don't intend to use the monitor for a long time, unplug the power cable from the monitor.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
Hold the
plug
heavy objects
-
on
The power line
Do not insert
a
fire
break out.
can
when
pulling out the power cable. Do not bend the power cord with excessive force
the power cord.
can
be
damaged, which
may
electric shock
cause
or
put
fire.
(like a metal chopstick) into one end of the power cable while the other end
input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
a
conductor
or
connected to the
-
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the monitor
can damage the monitor.
is in
use.
Electrical shock
Precautions in
Moving
the Monitor
Warning
Make
-
Make
-
sure
to turn off the monitor.
You may be electrocuted
sure
to
remove
or
the monitor
all cables before
You may be electrocuted
or
the monitor
can
be
damaged.
moving the monitor.
can be damaged.
A2
is
a
Precautions
Safety
Caution
Do not shock the monitor when
-
You may be electrocuted
Do not
or
moving
the monitor
dispose the product-packing
it.
can
be
damaged
box. Use it when you
move.
Make the
-
panel face forward and hold it with both hands to move.
drop the monitor, the damaged monitor can cause electric shock or fire. Contact with the service
repair.
If you
Precautions in
center for
the Monitor
Using
Warning
Do not
-
-
Fire
disassemble, repair or modify the
or
electric shock accident
monitor at your
discretion.
own
can occur.
Contact the service center for check, calibration
Do not spray water on the monitor
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene).
Fire
or
Keep the
-
Fire
or
monitor away from water.
electric shock accident can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
danger of explosion or fire
near
due careless
the monitor.
handling of the
When
cleaning the brown tube surface, unplug the power cord
scratching. Do not clean with a wet cloth.
-
The water
Take
a
can
sink into the
monitor, which
rest from time to time to
protect
Keep
the monitor clean at all times.
Take
a
comfortable and natural
Take
a
regular
Do not press
scratch on it.
break when
the
position
panel
and scrub with soft cloth to
electric shock
or
prevent
serious malfunction.
your vision.
working with
strongly upon
can cause
inflammable substances.
when
a
with
working with
monitor for
a
hand
or
a
a
monitor to relax the muscles.
long time.
sharp object such
as
nail, pencil
or
pen,
or
make
Keep the proper distance from the monitor.
Your vision may be impaired if you look at the monitor too closely.
-
Set the
-
appropriate
Your vision
can
Use authorized
-
Monitor
On
can
be
resolution and clock
by referring to the
User's Manual.
impaired.
detergent only when cleaning the
monitor.
(Do
not
use
benzene,
thinner
or
alcohol.)
be deformed.
Disposal
lamp used in this product contains a small amount of mercury.
dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
The fluorescent
Do not
A3
a
Accessories
Please check the accessories in the
*
The monitor and the accessories
product package.
can
be different from the
figures
shown here.
Remote Controller/Batteries
(AAA
ENGLISH
x
2)
Monitor
Colorific CD
User's Manual / Diskette
Cable
Cap
DVI-A
Signal
Cable
DVI-D
S-Video Cable
Signal
Audio Cable
RCA Cable and SCART Cable
-It varies from
country/region to
country/region.
A4
Cable
(PC)
Power Cord
Cable Holder
(x 2)
Accessories
To arrange the cables
First, pull
in
Figure
out the back cap attached to the
rear
of the monitor to
detach,
as
shown
1.
Back
-
Cap
Open the back cap before
you install the monitor.
[Figure1]
Neatly connect the signal input cable and
Place the AB
and
cable cabs
holder into the grooves
on
on
audio
cable,
the stand hole
both sides of the cable
(in
cab,
as
shown in
that
as
order),
Figure 2.
and insert the cable
shown in
Figure 3.
Cable Holder
[Figure2]
Affix the power cord and antenna cable
[Figure3]
(not included)
[Figure4]
A5
to the cable holder.
Important Monitor
Swapping
You
can
Function
swap the main
Spectacle
The
screen
screen
and the sub-screen when the PIP/POP/PBP function is used.
Function
center
area
is close to
Therefore, the different
screen
concentrate their focus
on
recognized,
the
which makes it
a
4:3 ratio and the outskirt
ratio is
screen
possible
applied for each
center,
a
area.
PC environment in which you
Sleep
area
perform graphic
is
expanded by more than
ordinary people
non-linear ratio increase at the outskirt
or
or
15:9.
Because most
to watch 4:3 TV screen with
However, the spectacle function is useful in watching TV
When
Features
a
motion
wide
area
is not
screen.
pictures but
is not suitable for the
document work.
Function
watching
AV/TV
Press this button
--
automatically turned off after
appropriate time duration.
The monitor will be
repetitively
to select
an
A6
a
certain
period of time.
ENGLISH
Name and Function of the Parts
Name of the Remote Controller Buttons
Remote Control
MUTE
POWER
SOURCE
If you press the button once,
the following Input Signal
INPUT SELECT
TV/AV
I/II
DVI
Digital
DVI
Analogue
Window will appear. Select the
signal type you want using the
TV
AV1
*/SSM
button.
AV2
S-Video
TV/AV
TV/AV button
TV>AV1>AV2>S-Video
PR
I/II
OK
VOL
:
Bilingual
:
choice and sound mode
selection
VOL
Press this button
to switch from Stereo to Mono sound in case
PR
of stereo transmission, or from Nicam Stereo
Mono, in case of digital
to Nicam
transmission.
to switch from Nicam Dual I to Nicam Dual II
or
Nicam Dual I+II in
case
of Nicam Dual
transmission.
to choose between Dual
I, Dual II
or
Dual
I+II in case of
AUTO
TEXT
SWAP
SLEEP
MODE
M
LIST
TIME
bilingual transmission :
Dual I sends the primary broadcast language
to the loudspeakers ;
Dual II sends the secondary broadcast
language to the loudspeakers ;
Dual I+II sends a separate language to each
loudspeakers.
NOTE
:
stereo
or
In
case
of weak stereo sound
signals,
Nicam stereo transmission, select
with
mono
reception.
MENU
Use this button to enter the On Screen
Display menu.
EXIT
Use this button to exit the On Screen
*/SSM
There is not
A7
a
function which is supported
Display
menu.
ENGLISH
PR
PR
OK
VOL
(
VOL
VOL
)
(
Buttons
)
Buttons
OK Button
PR
Number buttons
AUTO Button
?This function is to
automatically search
the
available channels. It is available to the TV
signal
inputs only.
?This function is to
AUTO
TEXT
SWAP
SLEEP
MODE
M
automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode). It is
available to the PC analog signal input only.
SWAP function
To switch the main-screen and sub-screen in
PIP/POP/PBP mode.
UPDATE
LIST
TIME
SIZE
Q.VIEW
MIX
HOLD
APC/PSM
REVEAL
X
?
INDEX
i
A8
Name and Function of the Parts
Remote Control
PR
OK
VOL
VOL
SLEEP
PR
You
SLEEP Timer
:
can
set
period after which the
time
a
TV / AV1 / AV2 / S-Video should switch itself to
standby.
Press the
key repeatedly to select the
number of minutes.
LIST
To
: Programme list
display the programme
list
(0~99).
PROGRAMME
PROGRAMME LIST
0_
_
_
_
_
_
_
_
_
_
_
_
_
4_
8_
AUTO
_
_
_
_
_
_
_
_
5_
9_
_
_
_
2_
_
_
_
_
_
_
_
_
6_
10_
_
_
_
_
_
_
_
_
_
_
_
_
_
3_
_
_
_
_
_
_
_
_
7_
11_
_
_
_
_
_
_
_
_
_
_
_
_
SWAP
12_
16_
TEXT
1_
SLEEP
MODE
_
_
_
_
_
_
_
_
13_
17_
_
_
_
_
_
_
_
_
14_
18_
15_
19_
Note: TV channels
setup
M
to
displayed in blue have been
skipped in the Programme Edit
menu
UPDATE
LIST
TIME
Q.VIEW
X
SIZE
Q.VIEW
MIX
HOLD
APC/PSM
REVEAL
To
:
QUICK VIEW Button
display the previously selected
TV channel.
APC / PSM
?
Press
repeatedly to select Dynamic, Standard, Mild,
or User picture mode. This function is not
supported in PC mode.
Game
INDEX
i
A9
Remote Control
-
PIP/POP/PBP function
1.
:
PIP
in
Picture)
The sub-screen is
changed
(Picture
SMALL
2.
POP
->
MEDIUM
(Picture
The sub-screen
out
->
Picture)
moves
ENGLISH
in the order shown below.
LARGE
OFF
->
Button
to the next mode whenever you press
this button.
:
AUTO
TEXT
POP ON
->
PBP(FULL)
->
PBP(4:3)
->
OFF
SWAP
SLEEP
MODE
M
UPDATE
LIST
TIME
Q.VIEW
MIX
PBP
POP ON
(FULL)
PBP
(4:3)
X
SIZE
3. Swap
Button
You
can swap the main screen and the sub-screen when the
PIP/POP/PBP function is used.
HOLD
APC/PSM
REVEAL
?
INDEX
PIP
i
SWAP
POP
SWAP
PBP
<Table of PIP/POP/PBP Function Support>
DVI-D
DVI-I
TV
AV1
AV2
S-Video
DVI-D
When
'Input Signal 1' comes on in the main
screen, only 'Input Signal 2' can be displayed
on
DVI-I
the sub-screen. On the contrary, if the main
displays 'Input Signal 2', the subdisplay 'Input Signal 1' only. You
swap 'Input Signal 1' and 'Input Signal 2'
screen
TV
screen can
AV1
can
AV2
using the
S-Video
A10
SWAP button.
Name and Function of the Parts
Remote Control
-
Using the Teletext function
TEXT
To select the teletext
screen
an
PR
option
OK
VOL
on or
off. The main index
the last selected page appears on the
together with an information headline and
or
page
line at the bottom of the
screen.
UPDATE
VOL
Press the button to appear the TV programme. At
the top of screen indicates that you are still in the
PR
teletext mode. Before
interrupting teletext, you
may select a page number. When the page has
been found, the information line appears briefly
on your screen. Press the button again to
reappear teletext.
SIZE
Press the button
repeatedly to display the
part, the lower part and then
AUTO
SWAP
normal page size. When the upper part is
you can scroll the text, line by line
displayed,
using the
TEXT
SLEEP
upper
to return to the
MODE
buttons.
HOLD
M
UPDATE
LIST
TIME
Press the button to
of the
X
subpages.
stop the automatically rotating
Press the button
continue the automatic
SIZE
Q.VIEW
MIX
HOLD
APC/PSM
REVEAL
again
rotating again.
INDEX
?
To
display the
INDEX
i
A11
main index.
to
Remote Control
-
Using the Teletext function
MODE
The mode will be switched in the Teletext
mode.
TIME
AUTO
press this button to select a sub page number.
The sub page number is displayed at the
bottom of the screen. To hold or change the
SWAP
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
TEXT
SLEEP
function.
MODE
M
UPDATE
LIST
TIME
SIZE
Q.VIEW
MIX
HOLD
APC/PSM
REVEAL
MIX
X
Display the teletext pages superimposed on
picture. To switch the TV picture off
press this button again.
the TV
REVEAL
?
Press the button to reveal/conceal the hidden
INDEX
information, such as solutions to riddles and
puzzles. Press this button again to remove the
information from the display.
i
Inserting
batteries into remote controller.
1. Take out the
battery cap.
2. Insert the
battery
3. Close the
battery cap.
?
You
can use a
within the
?
Dispose
with correct
polarity (+/-).
remote controller 7 meter distance and 30
unit scope.
of used batteries in the
degree (left/right)
receiving
A12
recycle
bin to
prevent environmental pollution.
ENGLISH
Name and Function of the Parts
Rear View
Back
-
Cap
Open the back cap before
you install the monitor.
S-Video
MIC.In
Audio In
DVI-I
MIC.Out
AV1
S-Video
MIC.In
DVI
Signal
Connector (DVI-D
or
DVI-A)
TV Tuner Jack: Connect the antenna.
Connect the power cord.
Connect to the
jack
in the PC sound card(See page A14).
Connect the SCART CABLE
AV
Input
Theft
Terminal
prevention locking
device
A13
AV
Terminal
Input
ENGLISH
Audio(S-Video / CVBS) Input Terminal
Video(CVBS) Input Terminal
S-Video
S-Video
Input
Terminal
Headphone/Earphone
Connection Terminal
MIC.In
Microphone
Connection Terminal
Sound card Connection Terminal
PC Audio
jack in
Microphone
-
Terminal
Input Terminal
Connect the audio cable to the LINE OUT
-
Input
Audio In
AV1
the PC sound card.
Connection Terminal
Connect the
microphone
MIC.Out
cable to
the MIC jack in the PC sound card.
Connect the SCART CABLE
Connecting
Make
the sound card
output terminal
to check the sound card connection terminal in the PC before
sure
connecting to the monitor.
by setting the jumper
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out
or the PC application. (For more details, refer to the sound card user's manual.)
-
-
Speaker
Out
*Line Out
:
:
The terminal connected to the
If Audio Out in the PC sound
with
an
speaker that is not equipped with an amplifier.
speaker equipped with an amplifier.
card has only Speaker Out, reduce the PC volume. This monitor is integrated
The terminal connected to the
amplifier.
A14
External Devices
Connecting to
When
First of
all,
Connecting to your PC
see
connect the
if the
computer, monitor and the peripherals
are
turned off.
Then,
signal input cable.
A
When
connecting
with the DVI-D
signal input cable.
B
When
connecting
with the DVI-A
signal input cable. (IBM compatible PC)
C
When
connecting
with the DVI-A
signal input cable. (Macintosh)
Rear side of the monitor.
AV1
PC
A
PC
B
C
MAC
Macintosh
Adapter (Optional)
Use the standard Macintosh
adaptor
adapter since
is available in the market.
Connect the power cord.
Rear side of the monitor.
AUDIO IN
DVI-I
MIC.IN
AV1
S-Video
MIC.Out
*
When
connecting to a
wall outlet.
A15
an
incompatible
(Different signaling system)
Turn
on
power
by pressing the
power button
on
the monitor.
ENGLISH
Power button
Select
input signal.
an
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
input signal.
at the front side of the monitor.
connecting with a DVI-D signal input cable.
Digital: DVI-D digital signal.
Select DVI
When
?
the remote controller to select the
connecting with a DVI-A signal input cable.
Analogue: DVI-A analog signal
Select DVI
TV/AV
I/II
INPUT SELECT
*/SSM
DVI
Digital
DVI
Analogue
TV
AV1
PR
AV2
OK
S-Video
VOL
VOL
PR
Turn
on
Note
the PC.
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Signal cable (Not DVI-A cable ) when using a PC with DVI output.
In some video cards, DVI-analog output may not be supported.
Connect the DVI-D
A16
Connecting to
When
External Devices
watching Video / DVD
Connect the video cable
shown in the below
as
figure and then
connect the power cord.
(See page A15)
A When connecting with
an
SCART cable.
L
AUDIO
G
DR
AV1
SCART Cable
Audio In
MIC.Out
Video / DVD
Rear side of the Monitor
B When connecting with
?
an
Connect the
Sound
input terminal
(right) Red)
RCA cable.
with
a
proper color match.
(Video
--
--
AUDIO
OUT
R
Red
White
S-Video
Yellow
W
RCA Cable
VIDEO
Y
OUT
MIC.In
Video / DVD
Rear side of the Monitor
A17
Yellow, Sound (left)
--
White,
C
When connecting with an S-Video cable.
Connect to the S-Video input terminal to watch
?
ENGLISH
high image quality movies.
Red
AUDIO
OUT
White
RCA Cable
R
S-Video
W
S-Video Cable
MIC.In
VIDEO
OUT
Video / DVD
Rear side of the Monitor
Select
an
input signal.
Press the SOURCE button
signal. Or,
on the remote controller to select the input
press the SOURCE button at the front side of the monitor.
TV/AV
I/II
*/SSM
INPUT SELECT
A
When
?
B
When
?
C
connecting with
Select AV1 (Video)
connecting with
Select AV2 (Video)
When
?
connecting with
a
SCART cable.
DVI
Digital
DVI
Analogue
PR
TV
a
AV1
RCA cable.
AV2
S-Video
a
S-Video cable.
S-Video
A18
OK
VOL
VOL
PR
Connecting to
When
External Devices
watching TV
See if the antenna cable is connected at the
then,
rear
side of the monitor and
connect the power cord.
Rear side of the Monitor
AUDIO IN
DVI-I
MIC.IN
AV1
S-Video
MIC.Out
DVI-I
Antenna Cable
(optional)
Select
an
input signal.
Press the SOURCE button
signal. Or,
on the remote controller to select the input
press the SOURCE button at the front side of the monitor.
TV/AV
I/II
INPUT SELECT
*/SSM
?
Select TV
DVI
Digital
DVI
Analogue
TV
AV1
PR
AV2
OK
S-Video
VOL
VOL
PR
A19
Selecting and Adjusting the Screen
Name of the Buttons in the Screen
Adjustment
Unit
ENGLISH
?
Power LED
This indicator
display
lights up green when the display operates normally. If the
(Energy Saving) mode, this indicator color changes to
is in DPM
amber.
Power Button
MENU Button
?
?
?
OSD Select /
Adjust
Press the button to turn
on
the power. Press the button
Use this button to show/hide the OSD
Use the button to select
an
icon
or
(On Screen Display)
adjust the setting
Button
?
Use this button to
brightness and
(DVI-A,DVI-D).
?
directly control
contrast of the PC
signal
Use this button to control the channel for
the TV
?
signal.
Adjust the volume.
A20
again to turn
it off.
menu screen.
in the OSD
screen.
Selecting and Adjusting the Screen
Name of the Buttons in the Screen
[For
AUTO/SELECT Button
?
TV
Adjustment
Unit
signal]
Automatic
programming
will be started.
Auto in progress
0
[For
PC
50%
----
signal]
Auto in progress
[Other signals]
?
The current
signal
and mode information will be
SOURCE Button
INPUT SELECT
?
Select the
DVI
DVI
input signal
DVI
Digital
Analogue
DVI
digital signal
analog signal
TV
Television
AV1
SCART
AV2
The unit that receives the
Composite
SeparateVideo
signal
from the remote controller.
OSD Lock/Unlock Button
Menu button
+
Use this button to lock/unlock OSD
(Activated
when
screen adjustment.
pressed together longer than 5 seconds.)
Controls locked
?
OSD is locked
Controls unlocked
?
OSD is unlocked.
A21
DVI
Digital
DVI
Analogue
TV
AV1
AV2
video
S-Video
?
displayed.
S-Video
OSD Menu
--
When Connected to Your PC
Icon
Function
Description
Adjusts screen brightness, contrast and color
that you
prefer.
PICTURE
Adjusts
the audio function.
Adjusts
PIP/POP/PBP mode function.
Adjusts
the
SOUND
PIP/POP/PBP
screen
status
according
to the circumstances.
SPECIAL
Adjusts position
of the screen, clock and
phase.
RGB-PC
OSD Menu
--
When
Icon
Watching TV/Video/DVD
Function
Set/Selects te channel.
Description
(available only
when
watching TV)
STATION
Adjusts
the
Adjusts
the audio function.
Adjusts
PIP/POP/PBP mode function.
Adjusts
the
screen
Screen
Display)
screen
video.
PICTURE
SOUND
PIP/POP/PBP
status
according
to the circumstances.
SPECIAL
Note
OSD(On
The OSD function enables you to
adjust the
graphical presentation.
A22
screen
status
conveniently since it provides
ENGLISH
Selecting and Adjusting the Screen
How to
adjust the OSD (On Screen Display)
PR
PR
OK
OK
OK
Pops
up the
Select
Select
a menu
a menu
icon
Adjust the status
icon
?
Use the remote controller to
1
Press the MENU
2
To
3
When the icon you want becomes
highlighted,
4
Use the
adjust the item
5
Accept the changes by pressing the
6
Exit the OSD
access a
How to
You need to
new
set
or
Button, then the main
control,
use
the
by pressing the
screen
changing
adjust the
OSD
screen.
of the OSD appears.
press the OK Button.
to the desired level.
OK Button.
EXIT Button.
display
when
connecting the
following
the mode. Refer to the
monitor to
a
section to
screen.
Press the AUTO/SELECT button
analog signal. Then,
an
(AUTO button in a remote controller)
optimal screen status will be selected
that fits into the current mode.
If
Exit from the
menu screen.
adjust the screen automatically.
optimal monitor
in the PC
menu
Save
adjustment
Buttons.
Buttons to
adjust the
computer
an
OK
PR
PR
menu screen
screen.
adjustment is not satisfactory, you
phase in the OSD menu.
need to
adjust
screen
clock and
A23
position,
Auto in progress
adjust the screen when using the VCR/DVD/TV
ENGLISH
STATION
Auto programme
Manual programme
Programme edit
MENU
Auto programme
Prev
STATION
Auto programme
System
Manual programme
Storage
Programme
MENU
edit
Prev
Press the
System
from
Start
buttons to select the TV system of the country
or
part of the
world from where you want to receive the TV channels.
If you want to receive 'SECAM L' channel, change the SYSTEM
'L' before
launching
an
menu
to
automatic search.
To select
a channel number or enter the channel number with the number
buttons from where you want to start searching for new channels. If e.g.
you want to keep the channels 1 to 10 stored earlier, enter channel
number 11. Your TV search for new channels from number 11 onwards.
Storage
from
Start
Press OK button to start automatic programming. all available TV
are searched for and stored automatically. To stop auto
channels
programming, press the MENU or OK button. When
completed, the programme list menu appears.
Manual programme
To
STATION
Auto programme
System
Manual programme
Storage
Programme
edit
change
auto
programming
is
the channel.
Channel
Name
Fine tune
Search
MENU
Prev
System
Press the
buttons to select the TV system of the country
the world from where you want to receive the TV channels.
Storage
Press the
buttons to select the channel number or enter the
channel number with the number buttons in where you want to store
channel.
Channel
Press the
buttons to select C-CH for aerial channels
cable channels.If you know the C-(01~69)or S-channel
enter it derectly with the digit buttons 0 to 9.
To select the channel reception type. : V/UHF / Cable
A24
or
or
part of
S-CH for
number(01~47),
Selecting and Adjusting the Screen
adjust the screen when using the VCR/DVD/TV
Name
To
It is
the assigned channel name.
possible to change the name stored
to
a
TV channel which has not
or
numbers
see
be
can
Press the
Fine tune
In
the
Programme edit
assign
to be
number
a
changed.
->
Press the
0~9,and alphabet A~Z) ->
OK button
on
the remote
buttons to search next channel backward
STATION
0_
Auto programme
4_
_
_
_
_
_
_
_
_
_
_
_
_
a name
name
control).
of poor reception, you can improve the reception by fine
buttons to fine tune for the best picture and sound.
Use the
direction.
Search
move cursor
character.(space,
the AUTO/SELECT button (or
case
to
or
with up 5 letters
to the programme numbers 0 to 99.
buttons to
buttons to select
Press
given
in the memory
yet been entered. A
1_
_
_
_
_
_
_
_
_
5_
2_
6_
_
_
_
_
_
_
_
_
3_
7_
_
_
_
_
_
_
_
_
or
tuning.
Use
foreward
Manual programme
8_
Programme
16_
To
adjust the
Delete
_
_
_
10_
_
_
_
_
_
_
_
_
_
_
_
_
_
11_
_
_
_
_
_
_
_
_
_
_
_
_
edit
12_
MENU
9_
_
_
_
_
_
_
_
_
13_
_
_
_
_
_
_
_
17_
_
Prev
Edit submenu function, Press the OK
Press the
14_
18_
15_
19_
Delete
Move
Copy
Skip
button
-->
on
the remote control
a TV channel to be deleted.
the remote control -> The selected TV
channel number is deleted, all the following channels are shifted up
->
buttons to select
Press the red
key
on
one
position.
Copy
Move
Press the
Press the
a
TV channel to be
copyed.
following
->
channel
a channel number to be moved.
the remote control. -> Press the
buttons to move the TV channel to the desired channel number. ->
Press the yellow key again to release this function.
Press the
Skip
buttons to select
Press the green key on the remote control. All the
numbers are shifted down one position.
buttons to select
yellow key
Press the
Press the blue
displayed
key
->
on
buttons to select a channel number to be skipped.
the remote control. The skipped TV channel is
on
in blue.
A25
->
Adjusting Screen Color
PSM
TV/AV1/AV2/S-Video
PICTURE
The PSM function
PSM
Dynamic
CSM
Standard
Auto
Brightness
depending
Dynamic
the AV/TV usage environment.
Select this option to display with
on
a sharp image.
general and natural screen display status.
Mild : Select this option to display with a mild image.
Game : Select this option to enjoy dynamic image when playing a game.
User : Select this option to use the user-defined settings.
?
Mild
Game
Standard
?
User
?
?
Prev
MENU
input only
automatically adjusts the screen image quality
?
:
:
The most
Contrast
PICTURE
PSM
CSM
Auto
Brightness
To
adjust the
contrast of the screen.
Dynamic
Contrast
5
Standard
Brightness
50
Mild
Colour
50
Brightness
To adjust the brightness
Game
Sharpness
50
Colour
User
To
MENU
Sharpness
To adjust the cleaness
Prev
adjust
of the
screen.
the color to desired level.
of the
screen.
CSM
PICTURE
PSM
6500K
CSM
9300K
Auto
Brightness
D-SUB ANALOG/DVI DIGITAL
User
?
6500K/9300K
6500K:
9300K:
?
MENU
Prev
User
:
a
factory setting
color set.
reddish white.
bluish white.
option to
use
the user-defined
settings.
Red / Green / Blue
PICTURE
6500K
Red
100
CSM
9300K
Green
100
User
Brightness
MENU
Auto
Selecting
Select this
PSM
Auto
:
Slightly
Slightly
input only
Blue
Set your
own
color levels.
100
Prev
Brightness
PICTURE
PSM
CSM
Auto
Off
Brightness
MENU
Note
Prev
AUTO BRIGHTNESS CONTROL
On
This
menu automatically adjusts computer screen brightness to an
optimal state. If you set the menu to 'On,' the brightness will be
automatically adjusted to the surrounding environment whenever
you use the computer while watching TV.
If the input is DVI analogue/DVI Digital, the adjustable items in the PSM function are
Contrast/Brightness.
If the 'PSM' setting in the Picture menu is set to Dynamic, Standard, Mild or Game the
subsequent menus will be automatically set.
A26
ENGLISH
Selecting and Adjusting the Screen
Adjusting
the audio function
SOUND
SSM
Balance
AVL
SRS WOW
MENU
SSM
Prev
The best sound tone
quality will be selected automatically
depending on the video type that you're currently watching.
SOUND
SSM
Flat
Balance
Music
AVL
Movie
SRS WOW
Speech
?
Flat
The most
?
User
commanding and natural audio.
Music
Select this option to enjoy the original sound when
?
MENU
Prev
Select this option to
?
enjoy sublime sound.
Speech
Select this option to watch sports
?
Balance
Use this function to balance sound from the left and
AVL
To
sound volumes
To
SRS WOW Set the SRS WOW
use
this
across
broadcasting.
User
Select this option to
adjust uneven
appropriate level.
listening to the music.
Movie
use
the user-defined audio
settings.
right speakers.
all channels
or
signals automatically to the
most
feature, select ON.
menu on.
The SRS WOW function
plays back the mono or stereo sound input with the dynamic surround
effects. It will provide rich and profound sound tone.
with SRS WOW on, user audio setting can not be adjusted.
Note
When connected to your computer and the 'SSM' setting in the audio menu is
Music or Speech, the available menus are Balance, AVL and SRS WOW
.
A27
one
of Flat, Movie,
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
ENGLISH
PIP/POP/PBP
On/Off
Source
Size
Image
Sound
MENU
On/Off
Prev
PIP
After
selecting PIP in the PIP On/Off
following menu items can be adjusted.
menu, the
POP
After
selecting POP in the POP On/Off
following menu items can be adjusted.
menu, the
PBP
After
selecting
following menu
input signal for
Source
To select
Size
To
adjust
Image
To
adjust the image of the
an
PBP in the PBP On/Off menu, the
items can be adjusted.
PIP/POP/PBP.
the size of the PIP/POP/PBP
screen.
(PIP : Small, Medium, Large
/ PBP
:
Full, 4:3)
PIP/POP/PBP screen; Press the
button to display the
submenu for PIP/POP/PBP IMAGE. Use the
buttons to adjust the item to the
desired level. The items of the sub-menu may vary
depending
on
the type of the
source.
Contrast
PIP/POP/PBP
On/Off
Source
Size
Adjust
Contrast
5
Brightness
50
Colour
50
Brightness
Adjust PIP/POP/PBP
Adjust the
Sound
*
Sound
screen contrast.
screen
brightness.
Colour
Image
MENU
PIP/POP/PBP
signal.
Prev
To turn the PIP/POP/PBP sound on/off.
A28
PIP/POP/PBP
The sub-menu
can
differ
screen
colour.
according
to the
type of the input
Selecting and Adjusting the Screen
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
Position
To
PIP/POP/PBP
adjust the position
to PIP screen.
Position
Swap
MENU
Prev
Swap
To switch the main-screen and sub-
PIP/POP/PBP
screen
Position
Off
Swap
On
MENU
Prev
PIP
SWAP
POP
SWAP
PBP
A29
in PIP/POP/PBP mode.
the
Selecting
options
ENGLISH
SPECIAL
Input
Child lock
Language
Image size
Transparency
MENU
Input
Prev
If you press the button once, the following
Input Signal Window will appear. Select
SPECIAL
Input
Digital
DVI
Analogue
Child lock
TV
Language
AV1
Image
the
signal type
you want
using
the
button.
AV2
size
S-Video
Transparency
Prev
MENU
Child lock
DVI
Use the
buttons to select ON
OFF. The TV
or
used with the remote control. This feature
In order to lock the OSD
In order to unlock
screen
can
adjustment,
it, do the following
be set up
can
so
that it
can
only
be
prevent unauthorized viewing.
set the Child lock tab to the 'on'
position.
:
1) Push the menu button on the remote control and set Child lock to the 'off' position.
button
2) Simultaenously push the menu button on the bottom of the monitor and the
for 5 seconds.
Language
Image
size
Transparency
To choose the
To select the
To
language
image
in which the control
size of the
screen.
adjust the transparency of the OSD
names are
displayed.
(Full/4:3/Spectacle/1:1)
menu screen.
Zoom
Use this function to
SPECIAL
Zoom
Reset
zoom
in the
screen.
When you turn the monitor off and on again,
the default screen size will be restored.
Zoom
0
H-Position
0
Press the
V-Position
0
submenu for ZOOM.
*
If the
button to
display the
zooming value is set to '0', vertical and
positioning cannot be adjusted.
horizontal
MENU
Reset
Prev
Use this function to reset the monitor to the
factory default. However, language selection will
be initialized.
Note
the Zoom
menu
will be disabled if the
screen
A30
size is not Full
or
PIP/POP/PBP is in
use.
not
Selecting and Adjusting the Screen
Adjusting Screen CLOCK/PHASE
Position
and Position
To
adjust position of the screen.
button to display the
Press the
submenu for Position.
Left
Right
Up
Down
Clock
To minimize any vertical bars
screen size will also change.
Phase
To
or
stripes visible on the
adjust the focus of the display. This item
or sharpen the image of characters.
screen
allows you to
Moving the
horizontally.
Moving the
vertically.
background.The
remove
screen
position
screen
position
horizontal
any horizontal noise and
clear
Auto-
This function is suitable for
analogue
signal input only. This button is for
the automatic adjustment of the
screen position, clock and phase.
configure
A31
Troubleshooting
No
is
image
Is the monitor power cord
connected?
?
Does the power LED is turned on?
?
Power is on, power LED is green but
the screen appears extremely dark.
?
Does the power LED look amber?
?
displayed
See if the power cord is
See if the power switch is turned
Adjust brightness (
Range'
message
?
*
Does the 'Check Signal Cable'
message
?
appear?
?
(
saving mode,
) again.
move
the
key.
(video card) is out of the
frequency range of the
monitor. Adjust the frequency range by referring
to the Specifications in this manual.
The
signal
vertical
appear?
press any
on.
and contrast
)
If the monitor is in power
mouse or
Does the 'Out of
properly connected to the
outlet.
from the PC
horizontal
or
Maximum resolution
DVI-A
:
1280
x
1024
DVI-D
:
1280
x
1024
The
signal
@60Hz
@60Hz
cable between PC and monitor is not
connected. Check the signal cable.
Press the 'SOURCE' button in the remote
controller to check the
input signal.
'Unknown Monitor' message appears when the monitor is connected.
Did you install the driver?
?
Install the monitor driver, which is provided with
the monitor, or download it from the web site.
(http://www.lge.com)
?
See if the
referring
plug&play function
to the video card
is
user
supported by
manual.
'Controls Locked' message appears.
The "Controls locked" message
appears when pressing the Menu
button.
?
locking function prevents unintentional
setting change due to careless usage. To
unlock the controls, simultaneously press the Menu
button and
button for 5 seconds. (You cannot set
this function using the remote controller buttons. You
can set this function in the monitor only.)
The control
OSD
*
Note
Vertical frequency: To enable the user to watch the monitor display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
*
Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A32
ENGLISH
Troubleshooting
The
Is the
screen
screen
image
position wrong?
?
looks abnormal.
DVI-A
analog signal
--
Press the "AUTO" button in
the remote controller to
optimal
screen
mode. If
adjustment is
Position OSD
?
automatically select the
status that fits into the current
not
satisfactory,
use
the
menu.
See if the video card resolution and frequency are
supported by the monitor. If the frequency is out of
range, set to the recommended resolution in the
Control Panel Display Setting menu.
--
Do thin lines appear on the
background screen?
?
DVI-A
analog signal
screen
mode. If
the
?
DVI-A
analog signal
screen
mode. If
adjust the horizontal /
position in the Zoom menu.
Screen size is
automatically adjusted
?
If the
PC,
differs in the main and
sub
when connected to the
screen
satisfactory,
use
the
Press the "AUTO" button in
automatically select an
status that fits into the current
not
satisfactory,
use
the
menu.
screen
size is not full when connected to the
execute the PIP/POP/PBP to
screen
Brightness
not
?SeeiftheZoomvalueissetto0.Ifitis,you
cannot adjust the H/V Position value.
when connected to the PC.
No sound appears in the TV channel
display window.
--
adjustment is
Phase OSD
Unable to
automatically select an
menu.
the remote controller to
optimal
vertical
Press the "AUTO" button in
status that fits into the current
adjustment is
Clock OSD
or
--
the remote controller to
optimal
Horizontal noise appears
characters look blurred.
--
change to
full
mode.
?SeeiftheTVsoundissettomono.Ifitis,the
sound will not be displayed.
?
You cannot
adjust brightness
in the PIP/POP/PBP
Screen menu for the sub-screen among
PIP/POP/PBP menus. Therefore, brightness
PC.
can
be different for the sub-screen.
After-image appears on the monitor.
After-image appears when the
monitor is turned off.
?
If you
use a
fixed
may be damaged
function.
A33
image for a long time, the pixels
quickly. Use the screensaver
Troubleshooting
ENGLISH
The audio function does not work.
No sound?
?
?
No sound is available when the
PIP/POP/PBP mode is
See if the audio cable is connected
Adjust the
properly.
volume.
?
See if the sound is set
?
See if the sound is set to On in the PIP/POP/PBP
engaged.
properly.
menu.
Sound is too dull.
Sound is too low.
?
Select the
?
Select the
?
Adjust the
appropriate treble sound.
appropriate bass sound.
volume.
The TV function does not work.
The TV
signal
is not
received.
being
?
See if you have selected the proper channel
mode.
?
Use the automatic channel
?
See if the TV antenna is
The "IMAGE SIZE" function in the OSD
The "IMAGE SIZE" function in the
OSD
menu
?
menu
setup function.
properly connected.
does not work.
See if the PIP/POP/PBP function is in
use.
If the
PIP/POP/PBP function is in use, the "IMAGE
SIZE" function may not work.
does not work.
Screen color is abnormal.
Screen has poor color resolution
(16
?
Set the number of colors to
Select Control Panel
--
Screen color is unstable
or mono-
?
colored.
Do black spots appear
screen?
more
than 24 bits
(true
color)
colors).
on
the
?
Color Table
menu
--
Display
--
Settings
in Windows.
Check the connection status of the
Or, re-insert the PC video card.
signal
cable.
Several
pixels (red, green, white or black color)
may appear on the screen, which can be
attributable to the unique characteristics of the
LCD
A34
panel.
It is not
a
malfunction of the LCD.
Specifications
The
product specifications
LCD Panel
can
change without prior
Screen
notice for
product improvement.
17 inches
(43.438cm) TFT (Thin Film Transistor)
(Liquid Crystal Display) Panel
Visible diagonal size: 43.438cm
Type
LCD
Video
Signal
Pixel Pitch
0.291mm
Max. Resolution
DVI-A
:
1280 X 1024 @60Hz
DVI-D
:
1280 X 1024 @60Hz
Recommended Resolution
DVI-A : WXGA 1280 X 768 @60Hz
DVI-D : WXGA 1280 X 768 @60Hz
Horizontal
Frequency
DVI-A : 30
-
66 kHz
DVI-D:30-66kHz
Vertical
Frequency
Synchronization Type
Input
-
85 Hz
Separate/Composite/SOG (Sync On Green)/Digital
DVI-A(analog), DVI-D (digital), S-Video,
Composite video, Scart, TV
Connector
Power
56
Rated
Power
Voltage
Consumption
AC 100-240V~50/60Hz 1.1A
Normal
operation: 70W
preparation
Power saving state: ≤ 6W
Power saving
state: ≤ 6W
Power switch off: ≤ 5W
Dimension/Weight
Environmental Conditions
Size (WxLxH)
Weight (excl. package)
505.5mm
6.6
x
231.5
mm x
365mm
kg
Operational Condition Temperature: 10˚C 35˚C Humidity: 10%
Storage Condition
Temperature: -20˚C 60˚C Humidity: 5%
~
,
~
,
A35
80%
~
95%
~
Specifications
PC Mode
--
Preset Mode
Preset mode
1234567
Horizontal
Vertical
Frequency
(kHz)
Frequency
(kHz)
Horizontal
VGA
640
x
350
31.469
70
VGA
720
x
400
31.468
70
89
VGA
Vertical
Frequency Frequency
(kHz)
(kHz)
Preset mode
VESA 800
x
600
53.674
85
MAC
x
624
49.725
75
832
640
x
480
31.469
60
10
VESA 1024
x
768
48.363
60
VESA 640
x
480
37.500
75
11
VESA 1024
x
768
60.123
75
VESA 640
x
480
43.269
85
12
VESA 1280
1024
63.981
60
VESA 800
x
600
37.879
60
13
VESA 1280
768
47.7
60
VESA 800
x
600
46.875
75
x
x
Power LED
Mode
Monitor
Normal
Operation
Pre-power Saving State
Power Saving State
Green
Amber
Amber
Power Switch Off
-
Audio In
DVI-I
MIC.Out
AV1
S-Video
MIC.In
Locking
Use this
Device
locking cable (optional)
to
prevent theft.
A36
ENGLISH
Specifications
DVI-I
C1
C2
C5
C3
No.
C4
Signal
T.M.D.S.Data2T.M.D.S.Data2+
123456789
T. M. D. S. Data 2/4 Shield
T.M.D.S.Data4T.M.D.S.Data4+
DDC Clock
DDC Data
Analog Vertical Synchronization
T.M.D.S.Data1-
10
T.M.D.S.Data1+
11
T. M. D. S. Data 1/3 Shield
12
T.M.D.S.Data3-
13
T.M.D.S.Data3+
14
+5V Power
15
16
Grounding (return for +5V,
Hot Plug Detect
17
T.M.D.S.Data0-
18
T.M.D.S.Data0+
19
T. M. D. S. Data 0/5 Shield
20
T.M.D.S.Data5-
21
T.M.D.S.Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock
C1
Analog Red
Analog Green
Analog Blue
Analog Horizontal Synchronization
Analog Grounding(return for analog R,G&B)
C2
C3
C4
C5
T.M.D.S.
(Transition
horizontal sync and vertical
Minimized Differential
Signaling)
A37
sync)
Download PDF