LG | L1910SM | LG L1910SM Owner’s Manual

User's Guide
L1910SM
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On
Safety
power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
Use
only the
manufacturer
or
the nearest authorized
repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
There
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
On Installation
Do not allow
the
anything
display where the
Do not
use
this
to rest upon or roll over the power
power cord is
display
sink, laundry tub, in
near water
a wet
cord, and do
not
place
subject to damage.
such
basement,
as near a
or near a
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
can cause
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub
mar,
strike the Active Matrix LCD with
anything hard
or damage the Active Matrix LCD permanently.
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the
display.
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display
may differ from the view as shown.
Signal Cable
Power Cord
Analog signal
D-sub*
Wall-outlet
*
type*
PC-outlet
Varies according to model.
type*
PC
MAC
Mac adapter
For Apple Macintosh use,
separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
a
A3
Connecting
the
Display
Connecting the speaker
1. Attach the speaker to the monitor and tighten the screws.
2. Connect the audio DC cable
3. Connect the audio cable to the *LINE OUT jack of the PC sound card.
*Line Out
Speaker Out
Jack of the PC sound card
*LINE OUT
A terminal used to connect to the
speaker including
a
amplifier (Amp). Make sure that the
before connecting. If the Audio Out of PC
built-in
connecting terminal of the PC sound card is checked
sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line
Out using the card jumper of the program (Refer to the Sound Card Manual).
A4
Control Panel Functions
Front Panel Controls
VOLUME
Control
Function
Power Button
Use this button to turn the
Power
This Indicator
(DPMS)
display
on or
off.
Indicator
lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
MENU Button
Use this button to enter
or
exit the On Screen
Display.
Buttons
Use these buttons to choose
the On Screen
AUTO/SELECT
Button
Headphone/Earphone
Input
VOLUME
or
adjust
items in
Display.
Use this button to enter
a
selection in the On Screen
Display.
Automatically mutes the speaker
headphones are plugged in.
Use these buttons to decrease
level.
Audio ON/OFF button
AA5
or
volume when the
increase the volume
Control Panel Functions
Control
Direct Access Function
100
Bring
100
up Contrast and
AUTO
When
Brightness adjustment.
adjustment function
your display settings, always press the
AUTO/SELECT button before entering the On Screen
adjusting
Display(OSD). This will automatically adjust your display image
to the ideal settings for the current screen resolution size
(display mode).
The best
display
mode is 1280x1024.
This function optimizes the brightness, contrast or color value to
the surrounding conditions and settings and enables you to
enjoy the most suitable picture by adjusting the surroundings
(DAY/NIGHT/USER MODE).
?
?
?
?
TEXT: For
viewing letters
MOVIE: For viewing movies
PHOTO: For viewing pictures
or
the
photographs
USER MODE: This function memorizes the manual
adjustment -Brightness,
On Screen Display.
Contrast and Color value
on
the
CONTROLS LOCKED/UNLOCKED
:
MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and
button for 3 seconds: the message
"CONTROLS LOCKED" appears.
You
unlock the OSD controls at any time
MENU button and
button for 3 seconds:
can
by pushing
the message "CONTROLS UNLOCKED" will appear.
A6
the
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display, follow these steps:
Press the MENU Button, then the main
To
access a
becomes
control,
highlighted,
Use the
menu
of the OSD appears.
Buttons. When the icon you want
press the AUTO/ SELECT Button.
use
the
making image adjustments.
or
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the AUTO/ SELECT Button.
Exit the OSD
by Pressing the MENU Button.
A7
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
menu
BRIGHTNESS
CONTRAST
COLOR
Sub
Reference
menu
BRIGHTNESS
To
adjust the brightness
and
contrast of the screen
CONTRAST
PRESET
9300K
To customize the color of the
6500K
screen
R/G/B(User Color)
GAMMA
POSITION
TRACKING
SETUP
V POSITION
To
H POSITION
screen
CLOCK
To
adjust the position
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
for
OSD POSITION
a
user's
operating
Adjustable
NOTE
The order of icons may differ
depending
on
A8
and
screen
FACTORY RESET
:
of the
the model (A8~A10).
status
environment
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
NOTE
OSD (On Screen
To
Display)
menu
languages
adjust the brightness and
OSD
on
the monitor may differ from the manual.
contrast of the
Adjust
screen
Description
BRIGHTNESS / CONTRAST
BRIGHTNESS
To
88
adjust
the
brightness
of the
screen.
100
CONTRAST
To
To customize the color of the
OSD
9300K
the contrast of the
screen.
screen
Adjust
Description
PRESET
COLOR
PRESET
adjust
9300K/6500K
Select the screen color.
9300K: Slightly bluish white.
6500K: Slightly reddish white.
6500K
?
RED
?
GREEN
BLUE
RED
GAMMA
GREEN
Set your
own
color levels.
BLUE
GAMMA
To
adjust the position of the
OSD
Set your own gamma value. (-50~50)
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
screen
Adjust
Description
POSITION
Vertical Position
61
To
move
image
up and down.
39
Horizontal Position
To
A9
move
image left
and
right.
On Screen
To
Display(OSD)
improve
OSD
the
Selection and
clarity
and
Adjustment
of the
stability
Adjust
screen
Description
To minimize any vertical bars
stripes visible on the screen
CLOCK
TRACKING
background.The horizontal
size will also change.
CLOCK
or
screen
PHASE
the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
To
PHASE
To customize the
OSD
screen
status for
adjust
user's
a
Adjust
operating environment
Description
LANGUAGE
SETUP
LANGUAGE
To choose the
control
ENGLISH
names
language in which
are displayed.
the
OSD POSITION
NO
FACTORY RESET
OSD POSITION
To
adjust position
on
the
of the OSD window
screen.
1280x1024@60Hz
PRESET MODE
FACTORY
RESET
A10
Return to all factory default settings
except "LANGUAGE".
If you don't want to reset the monitor,
use the
button to select NO and
then press the AUTO/SELECT button.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness
Is the power indicator
amber?
If the
properly
if the power cord is connected
to the power outlet.
see
and the contrast.
is in power
saving mode, try moving
the mouse or pressing any key on the keyboard
to bring up the screen.
display
if the power is
to turn on the PC.
Make
Try
sure
on.
Do you see an "INPUT
SIGNAL OUT OF
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message
the screen?
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
on
Doyouseea"NO
SIGNAL "message on
This message appears when the signal cable
between your PC and your display is not
the screen?
connected. Check the
Do you
see a
"CONTROLS LOCKED" message
Do you see
"CONTROLS LOCKED"
when you
button?
signal
push
MENU
You
can secure
on
again.
the screen?
the current control
settings,
inadvertently
they cannot be
changed. You can unlock the OSD controls
at any time by pushing the MENU button
so
that
cable and try
and
button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
A11
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SELECT button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed.
If yes, readjust the video card to the recommend
resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SELECT button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in the
on screen display.
Press the AUTO/SELECT button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
Check if the signal cable is properly connected and
use a screwdriver to fasten if necessary.
Make sure the video card is
properly inserted
in the
slot.
Set the color setting
at Control Panel
The
screen
blinks.
-
higher than 24 bits (true color)
Settings.
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It has
to be
higher than AC100-240V 50/60Hz.
A12
Troubleshooting
Have you installed the
driver?
display
Have you installed the
display driver?
display driver from the
display driver CD (or diskette) that comes with
your display. Or, you can also download the
driver from our web site: http://www.lge.com.
Do you
Make
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
Be
sure
to install the
sure
to check if the video card
supports
Plug&Play function.
monitor found"
message?
Audio function
No sound.
Check if the audio cable is
Check the volume level.
Sound level is too low.
Check the volume level.
A13
correctly connected.
Specifications
Display
19 inches (48.26cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294
Sync Input
Video
Input
Resolution
mm
pixel pitch
Horizontal
Freq.
Vertical Freq.
Input Form
30
56
83kHz (Automatic)
-
75Hz (Automatic)
-
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
15 pin D-Sub Connector
Signal Input
Input Form
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1280
x
1024@75Hz
Recommend
VESA 1280
x
1024@60Hz
Plug&Play
DDC 2B
Power
Normal
:
Consumption
Stand-by/Suspend
≤
DPMS Off
≤3W
Dimensions
Width
41.28
cm
&Weight
(with tilt stand)
Height
Depth
43.50
cm
Tilt
Range
Power
Input
Environmental
Conditions
Tilt Stand
Signal
cable
Power cord
48W
3W
22.3
/ 16.25 inches
/ 17.13 inches
Net
/ 8.78 inches
8.1 kg (17.86 lbs)
Tilt
-5˚~30˚
Swivel
360˚
cm
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detached (
Attached(
)
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A14
notice.
Specifications
Audio
RMS Audio
Output 1W+1W(R+L)
0.7Vrms
Input Sensitivity
Speaker Impedance 4Ω
A15
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
VGA
640
x
350
31.469
70
VGA
720
x
400
31.468
70
VGA
640
x
480
31.469
60
VESA
640
x
480
37.500
75
VESA
800
x
600
37.879
60
VESA
800
x
600
46.875
75
MAC
832
x
624
49.725
75
VESA
1024
x
768
48.363
60
VESA
1024
x
768
60.123
75
10
MAC
1152
x
870
68.681
75
11
VESA
1152
x
900
61.805
65
12
VESA
1280
x
1024
63.981
60
13
VESA
1280
x
1024
79.976
75
123456789
VESA wall
mounting
Connected to another
object (stand
type and wall-mounted type. This
monitor accepts a VESA-compliant
mounting interface pad.)
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most computer
stores
A16
Digitally yours
Download PDF