LG | L1932P-SN | LG L1932P-SN Owner’s Manual

User's Guide
L1732P
L1932P
Make
sure
to read the
Important Precautions before using the monitor.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
on
the product and
dealer when you ask for service.
give the information to your
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the power cord supplied
cord, make
that it is certified
sure
with the unit. In
by
the
you use another power
national standards if not being
case
applicable
If the power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
provided by the supplier.
manufacturer
or
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
only a stand recommended by the manufacturer.
Do not
Use
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
a
near
wet
water such as near a
basement,
Displays are provided with ventilation
generated during operation. If
of heat
place
bathtub, washbowl, kitchen
swimming pool.
openings in the cabinet to allow the release
these openings are blocked, built-up heat
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front
2. Align
3. Insert the
the hooks
Warning:
on
base
facing
or
Removing the stand
downward
the stand base with the
cushion
on a
or
base
soft cloth.
matching
slots in the base of the monitor.
hooks into slots.
The tape and
with
locking pin may only be removed from those monitors
a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
equipped
Hook
Slot
4.
Use
a
coin
on
the back of the stand base and turn the
screw
clockwise to
tighten.
5. When
you desire to
coin to turn the
disintegrate the
screw
monitor from the stand base,
use a
counterclockwise.
Screw
100
10
0
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get
damaged
or
injure your foot.
A3
product may
Connecting
the
Display
Before
setting up the monitor, ensure that the power
system, and other attached devices is turned off.
to the
monitor, the computer
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~25˚
Height Range
:
Swivel :350˚
maximun 3.15 inch
(80.0mm)
80.0mm
First, remove
the locking pin.
Landscape & Portrait : You can rotate the panel
( For more information, refer to page A6.)
Make
sure
o
90 clockwise.
not to touch the
floor when the head rotates
to use the Pivot function.
Ergonomic
It is recommended that in order to maintain
position, the forward tilt angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
Connecting
the
Display
Using the Computer
1.
Place the monitor in
height
a
convenient, well-ventilated location
of your monitor, unlock the stand lock on
near
your computer. To
adjust
top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3. Connect the power cord into a proper power outlet
that is
easily accessible
and close to the
Power Cord
display.
Signal Cable
Analog signal Digital signal
D-sub
Varies according to model.
NOTE
This is
a simplified
representation of the
This
DVI
rear
Wall-outlet type
rear
view represents
view.
a
2
general model; your display
may differ from the view
shown.
1
as
PC-outlet type
PC
MAC
Mac adapter
For Apple Macintosh use, a separate plug adapter is
needed to change the 15 pin high density (3 row) D-sub
VGA connector on the supplied cable to a 15 pin 2 row
connector.
PC
4.
Press
button
on
the front switch
panel
to turn the power
When monitor power is turned on, the 'Self
Setting Function' is executed automatically.
on.
Image
(Only Analog Mode)
NOTE
'Self Image Setting Function'? This function provides the user with optimal display settings. When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
'
A5
Using
the Auto Pivot function
This model supports Auto Pivot (automatic rotation) functions.
To use this function, install the provided Forte Manager software first and then,
perform Automatic setting.(Manual is the default setting when you purchase the
-
-
product.)
guide included in the CD for more details on the installation method.
For the automatic setting, select Forte Manager -> Option -> Pivot -> Enable AutoPivot.
Refer to the installation
Notice
Forte
Manager software requires
Microsoft
Explorer 6.0 or later.
The response time (speed) for the Auto Pivot function can vary depending on the video
card and the PC performance, and these functions are not supported in the DOS mode.
Auto Pivot
Screen rotation
:
You
can
rotate the monitor
screen
part clockwise by 90°
※Caution : Be careful that your hands are not pressed down when
the
This
rear
.
rotating
screen.
view represents
a
general model, your display may differ from the view as shown.
<Pushing the screen
part backwards>
<Rotating clockwise>
Tilt the screen
part while rotating
it so that the monitor
does not touch
the floor.
A6
<When rotated
by 90° >
Control Panel Functions
Front Panel Controls
Bottom
Control
Function
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
-
-
+
Buttons
Button
Use these buttons to select
Screen Display.
Lightview
hot
or
adjust functions
in the On
key
This feature lets you easily select the best desired
NIGHT image condition optimized to the environment
DAY
(ambient illumination, image types etc).
DAY
:
Bright ambient illumination
NIGHT : Dark ambient illumination
TEXT
For text
images (Word processing etc.)
images in videos or movies
PHOTO : For pictures or drawings
NORMAL : This is under normal operating conditions
:
MOVIE
+
Button
SOURCE hot
:
For animation
key
Use this button to make D-Sub
or
DVI connector active.
This feature is used when two computers are connected
to the display. The default setting is D-Sub.
A7
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
17 inch monitor
:
1280
x
1024
19 inch monitor
:
1280
x
1024
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A8
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
Press the MENU Button, then the main
To
access a
becomes
Use the
control,
use
highlighted,
the
making image adjustments.
follow these steps:
menu
of the OSD appears.
-+
or
Buttons. When the icon you want
press the AUTO/SET Button.
/ + Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
-
Push the MENU Button
once
to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A9
On Screen
The
and
Display(OSD)
Selection and
following table indicates all the
setting menus.
Main
Sub
menu
PICTURE
On Screen
Adjustment
Display control, adjustment,
AD
menu
Reference
To
BRIGHTNESS
adjust the brightness,
contrast and gamma of the
CONTRAST
screen
GAMMA
COLOR
PRESET 6500K
To customize the color of the
screen
9300K
RED
GREEN
BLUE
POSITION
HORIZONTAL
To
VERTICAL
TRACKING
of the
CLOCK
To
improve the clarity
stability of the screen
PHASE
SETUP
adjust the position
screen
and
LANGUAGE
To customize the
OSD
HORIZONTAL
status for
a
user's
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A10
the model
(A10~A13).
screen
operating
On Screen
Selection and
Display(OSD)
Adjustment
were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
-+
SET
:
:
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A11
the monitor may differ from the manual.
On Screen
Display(OSD)
Main
menu
Selection and
Sub
Adjustment
Description
menu
PICTURE
PICTURE
BRIGHTNESS
To
adjust the brightness
of the
CONTRAST
To
adjust the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
screen.
contrast of the screen.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
COLOR
PRESET
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
Set your
own
blue color levels.
HORIZONTAL
To
move
image
left and
VERTICAL
To
move
image
up and down.
BLUE
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A12
right.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear
the image of characters.
or
sharpen
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
SETUP
OSD
POSITION
MENU
-
BALANCE
adjust position
on
the
the
the
of the OSD window
screen.
output of the video card is different
required specifications,
the color
level may deteriorate due to video
signal distortion. Using this function, the
SET
+
language in which
displayed.
are
To
If the
WHITE
Hz
To choose the
control names
SETUP
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
are
present in the
screen.
Hz
MENU
MENU
-
+
-
:
+
SET
Exit
POWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
Adjust
: Adjust
:
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
SET : Select another sub-menu
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A13
on.
only when
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
pressing
saving mode, try moving
key on the keyboard to
any
bring up the screen.
TrytoturnonthePC.
Doyouseean"OUTOF
RANGE" message
the screen?
on
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
the
see a
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
MENU button?
You
can secure
that
they
can
unlock the
pushing
signal
on
cable and try
again.
the screen?
the current control
settings, so
inadvertently changed. You
OSD controls at any time by
cannot be
the MENU button for several seconds:
the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
vertical
background,
bars or stripes are
visible.
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
in
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
The
Check if the
screen
mono or
color is
abnormal.
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color
setting higher than
Settings.
at Control Panel
The
screen
blinks.
Check if the
24 bits
(true color)
-
screen
is set to interlace mode and if
it to the recommend resolution.
yes, change
Make sure the power voltage is high enough, It
has to be higher than AC100-240V 50/60Hz.
A15
Troubleshooting
Have you installed the
Have you installed the
display
driver?
display
driver?
Be
display driver from the display
(or diskette) that comes with your
sure
to install the
driver CD
display. Or, you can also download the
our web site: http://www.lge.com.
Doyouseean
"Unrecognized monitor,
Plug&Play (VESA DDC)
Make
sure
Plug&Play
monitor found"
message?
A16
to check if the video card
function.
driver from
supports
17inch
Specifications
17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
Display
0.26
pixel pitch
Freq. Analog : 30 83kHz (Automatic)
Digital : 30 71kHz (Automatic)
Vertical Freq.
56 75Hz (Automatic)
Input Form
Separate TTL
SOG (Sync On Green)
Digital
mm
Horizontal
Sync Input
-
-
-
Video
Input
15
Signal Input
pin D-Sub Connector
D connector (Digital)
DVI
Resolution
-
Input Form
RGB Analog (0.7Vp-p/75ohm), Digital
Max
Analog : VESA 1280 x 1024 @75Hz
Digital : VESA 1280 x 1024 @60Hz
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
Off Mode
≤1W
Consumption
x
1024@60Hz
35W
:
≤1W
Dimensions
Width
39.00
cm
/ 15.35 inches
&Weight
(with tilt/ swivel
stand)
Height
Depth
43.00
cm
/ 16.93 inches
24.20
cm
/ 9.53 inches
Net
5.5
Tilt/Swivel
Tilt
-5˚~25˚
350˚
Range
Power Input
Environmental
Conditions
Swivel
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt/Swivel Stand
Signal
cable
Power cord
kg (12.13 lbs)
Attached(
Attached(
O
),
Detached
(O)
),
Detached
(
Wall-outlet type
or
)
PC-outlet type
NOTE
Information in this document is
subject to change without
A17
notice.
19inch
Specifications
19 inches
Display
(48.19 cm)
Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Horizontal
Sync Input
Freq.
Analog : 30 83kHz (Automatic)
Digital : 30 71kHz (Automatic)
56 75Hz (Automatic)
Separate TTL
SOG (Sync On Green)
Digital
-
-
Vertical
Freq.
-
Input Form
Video
Input
15
Signal Input
pin D-Sub Connector
D connector (Digital)
DVI
Resolution
-
Input Form
RGB Analog (0.7Vp-p/75ohm), Digital
Max
Analog : VESA 1280 x 1024 @75Hz
Digital : VESA 1280 x 1024 @60Hz
Recommend
VESA 1280
Plug&Play
DDC 2B
Power
On Mode
Sleep Mode
≤1W
Off Mode
≤1W
Consumption
x
1024@60Hz
39W
:
Dimensions
Width
43.00
cm
/ 16.93 inches
&Weight
(with tilt/ swivel
stand)
Height
Depth
44.50
cm
/ 17.52 inches
24.20
cm
/
Net
6.4
Tilt/Swivel
Tilt
Range
Power Input
9.53 inches
kg (14.11 lbs)
-5˚~25˚
Swivel
350˚
AC 100-240V~50/60Hz 1.0A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
Tilt/Swivel Stand
Attached(
5 % to 95 % non-Condensing
Humidity
Signal
cable
Power cord
Attached(
O
),
Detached
(O)
),
Detached
(
Wall-outlet type
or
)
PC-outlet type
NOTE
Information in this document is
subject
to
change without
A18
notice.
Preset Modes
1
2
3
4
5
6
7
8
9
10
11
*12
**13
VGA
VGA
VGA
VESA
VESA
VESA
MAC
VESA
VESA
MAC
VESA
VESA
VESA
(Resolution)
640
x
350
31.469
70
720
x
400
31.468
70
640
x
480
31.469
60
640
x
480
37.500
75
800
x
600
60
800
832
x
600
624
37.879
46.875
49.725
48.363
75
60
x
768
60.023
75
x
870
68.681
75
x
900
61.805
63.981
65
79.976
75
1024
x
1024
1152
1152
1280
1280
75
768
x
x
x
1024
1024
60
*
Recommend Mode
**
Indicator
On Mode
Sleep
Mode
Off Mode
blue
amber
off
Only Analog
Mode
Specifications
Connector Pin
Signal
1
8
9
16
17
24
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
1
T. M. D. S. Data2-
Signal(DVI-D)
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
7
DDC Data
8
Analog
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
Vertical
Sync.
(Transition Minimized Differential Signaling)
A20
Plug
Detect
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
VESA wall
mounting
Connected to another
object (stand type and walltype). This monitor accepts a VESAcompliant mounting interface pad.- (optional)
mounted
For further information, refer to the VESA Wall
Mounting Instruction Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased
separately at most
Connected to
computer
A21
stores
Digitally yours
Download PDF

advertising