LG | L2000C-BF | LG L2000C-BF Owner’s Manual

User's Guide
L2000C
L2000CN
L2000CE
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached
on
the product and
dealer when you ask for service.
give the information to your
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the
cord, make
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the
Contact your dealer if the display is not operating properly.
power is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
or near a
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
or strike the Active Matrix LCD with anything hard
damage the Active Matrix LCD permanently.
Do not rub
mar, or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1.
Place the monitor with its front
2. Align
3.
base
the hooks
on
facing
Removing the stand
or
downward
the stand base with the
on a
matching
cushion
or
base
soft cloth.
slots in the base of the monitor.
Insert the hooks into slots.
Warning:
The tape and
with
locking pin may only be removed from those monitors
a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
equipped
Hook
Slot
4.
Use
a
coin
on
the back of the stand base and turn the
screw
clockwise to
tighten.
5. When you
desire to
coin to turn the
disintegrate
screw
the monitor from the stand base,
use a
counterclockwise.
Screw
10
0
10
0
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get
damaged
or
injure your foot.
A3
product
may
Connecting
the
Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~25˚
Height Range
:
Swivel :350˚
maximum 3.15 inch (80.00mm)
80.0mm
First, remove
the locking
pin.
Landscape
& Portrait : You
can rotate
(* For detailed information, please refer
*
Make
sure
the
panel 90 clockwise.
o
to the Pivot Software CD
provided.)
not to touch the
floor when the head rotates
to
use
the Pivot function.
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
the
Connecting
Display
Using the Computer
1.
Place the monitor in
a
convenient, well-ventilated location
near
your computer. To
height of your monitor, unlock the stand lock on top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to
connection. 1
Connect the power cord into
3.
to the
display.
a
proper power outlet that is
adjust
the
secure
easily accessible and
close
2
Signal Cable
Power Cord
Digital signal Analog signal
DVI
D-sub
Varies according to model.
NOTE
This is
of the
This
a
simplified representation
rear
rear
Wall-outlet type
view.
view
represents
a
2
general model; your display
differ from the view
as
may
shown.
1
PC-outlet type
PC
DVI-D(This feature is not available in all countries.)
PC
MAC
Mac adapter
For Apple Macintosh use,
a
separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Press
on.
button
on
the front switch
Setting Function' is
(Only Analog Mode)
NOTE
Self Image Setting
'
panel
to turn the power
When monitor power is turned on, the 'Self
executed
Function'? This function
Image
automatically.
optimal display settings.When the user
to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
connects the monitor for the first
provides the
user
with
time, this function automatically adjusts the display
'
A5
Control Panel Functions
Front Panel Controls
Control
Function
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
-
+
Buttons
Use these buttons to select
Screen
For
SOURCE hot
key
or
adjust functions
more
information, refer to page
Use this button to make D-Sub
This feature is used when two
to the
in the On
Display.
display.
The default
A6
or
A13.
DVI connector active.
computers
setting
are
is D-Sub.
connected
Control Panel Functions
Control
Function
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
L2000C/L2000CN monitor
L2000CE monitor
:
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
:
1600x1200
1400x1050
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
to amber.
A7
this indicator color
changes
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display, follow these steps:
Press the MENU Button, then the main
To
access a
becomes
Use the
control,
use
highlighted,
the
making image adjustments.
menu
of the OSD appears.
-+
or
Buttons. When the icon you want
press the AUTO/SET Button.
/ + Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
-
Push the MENU Button
once to return to
the main
menu to
select another
function. Push the MENU Button twice to exit from the OSD.
A8
On Screen
The
and
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
menu
PICTURE
Sub-menu
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
sRGB
To customize the color of
6500K
the
screen
9300K
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
MOVIE / TEXT
FLATRON
F-ENGINE(
-
)
To select
USER
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A9
the model (A9~A13).
On Screen
Selection and
Display(OSD)
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Press the MENU
Menu Name
Button, then the main menu of the OSD appears.
PICTURE
Sub-menus
Icons
Button
Tip
MENU
-+
SET
:
:
Exit
Adjust (Decrease/Increase)
:
Enter
:
Select another sub-menu
NOTE
OSD (On Screen
Display)
menu
languages
on
A10
the monitor may differ from the manual.
On Screen
Selection and
Display(OSD)
Main
menu
Sub
Adjustment
Description
menu
PICTURE
PICTURE
of the
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
brightness
screen.
screen.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
COLOR
COLOR
PRESET
?
?
?
sRGB: Set the screen color to fit the SRGB
standard color specification.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
Set your
own
blue color levels.
MENU : Exit
BLUE
: Decrease
+ : Increase
SET : Select another sub-menu
-
POSITION
POSITION
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
A11
and
right.
up and down.
On Screen
Display(OSD)
Main
Selection and
Sub
menu
Adjustment
Description
menu
TRACKING
TRACKING
CLOCK
To minimize any vertical bars or stripes
visible on the screen background.The
horizontal screen size will also change.
PHASE
To
adjust the focus of the display. This
item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
+ : Increase
SET : Select another sub-menu
-
SETUP
LANGUAGE
To choose the
control
SETUP
OSD
POSITION
-
+
the
To
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
WHITE
BALANCE
MENU
language in which
displayed.
names are
the
level may deteriorate due to video
distortion. Using this function, the
SET
signal
signal
SETUP
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
MENU
-
MENU
-
:
+ :
SET
:
+
SET
Exit
POWER
INDICATOR
:
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
Adjust
Adjust
are
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
Select another sub-menu
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the + button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A12
only when
On Screen
A A A
Display(OSD)
The OSD
screen
Selection and
Adjustment
will appear when you touch the
(-)
button
on
the
right
of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the
non-applied
will appear on the right side.Touch the
SET button to use the adjusted screen.
screen
Main
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
TEXT: For text
USER
adjust the
USER sub-menu
function,
or
movies
User
can
You
can save or
...
Press the AUTO/SET Button
...
USER
...
BRIGHTNESS
in videos
images (Word processing etc.)
You
when
To
images
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different environment setting.
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
ACE
1
RCM
applied
2
Flesh tone
3
Color Enhance
2
SAVE
MENU
SET
Select the SAVE sub-menu using the SET button
and save the YES value using the buttons.
NORMAL This is under normal
A13
operating
conditions.
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
the
see a
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
MENU button?
You
on
signal
cable and try
again.
the screen?
the current control
settings,
they
inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
can secure
that
cannot be
several seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
vertical
background,
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SET button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon
the on screen display.
in
Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make
sure
the video card is
properly
inserted in
the slot.
Set the color
color)
The
screen
blinks.
setting higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A15
higher than
AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
driver?
display
Be
sure
to install the
driver CD
display
your display. Or, you
driver from
Do you
Make
see an
"Unrecognized monitor,
display driver from the
(or diskette) that comes with
sure
Plug&Play
our
also download the
can
web site:
http://www.lge.com.
to check if the video card
supports
function.
Plug&Play (VESA DDC)
monitor found"
message?
L2000CE Monitor
Image
not stretched
vertically at
1280x1024@75 resolutions
Image has
black
horizontal
area or
image
missing at the top edge
and bottom edge of the
1280x1024@60 and
Image
This is normal state of the
image. It is being
implemented to avoid character blurriness
caused by scaling 1280x1024 to 1400x1050
resolution.
screen.
A16
Specifications
L2000C/L2000CN
Display
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.255mm pixel pitch
Sync Input
Horizontal
Freq.
Analog : 28 83kHz (Automatic)
Digital : 28 83kHz (Automatic)
-
-
Vertical
Input
56
Freq.
Form
-
75Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
Video
Input
pin D-Sub Connector
15
Signal Input
DVI
D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
Input Form
Resolution
-
D-Sub : Analog VESA 1600 x 1200@60Hz
: Digital
VESA 1600 x 1200@60Hz
Max
-
DVI
-
Recommend VESA 1600
Plug&Play
Power
Consumption
On Mode
Mode
Off Mode
&Weight
Range
Environmental
Conditions
Without Stand
Width
44.39
cm
/ 17.47 inches
44.39
cm
/ 17.47 inches
Height
43.89
cm
/ 17.28
34.51
cm
/ 13.58 inches
51.89
cm
/ 20.43
Depth
24.26
cm
/ 9.55 inches
Net
7.7
inches(Min)
inches(Max)
6.86
cm
/ 2.70 inches
kg
Tilt range
Swivel range
Height
Input
≤1W
With Stand
Rotate
Power
58W
:
≤1W
Sleep
Dimensions
Tilt/Swivel
1200@60Hz
x
DDC 2B
range
-5˚~25˚
350˚
80mm / 3.15 inches
90˚clockwise(Landscape
->
Portrait)
AC 100-240V~50/60Hz 1.2A
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
A17
Specifications
L2000CE
Display
20.1 inches (51.0cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
20.1 inches viewable
0.291mm pixel pitch
Sync Input
Horizontal
Freq.
Analog : 28 83kHz (Automatic)
Digital : 28 83kHz (Automatic)
-
-
Vertical
Input
Video
Input
56
Freq.
Form
-
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
15
Signal Input
DVI
Input Form
Resolution
75Hz (Automatic)
-
D-Sub : Analog VESA 1400 x 1050@60Hz
: Digital
VESA 1400 x 1050@60Hz
Max
-
DVI
-
Recommend VESA 1400
Plug&Play
Power
Consumption
On Mode
Mode
Off Mode
&Weight
Range
Environmental
Conditions
Without Stand
Width
44.39
cm
/ 17.47 inches
44.39
cm
/ 17.47 inches
Height
43.89
cm
/ 17.28
34.51
cm
/ 13.58 inches
51.89
cm
/ 20.43
Depth
24.26
cm
/ 9.55 inches
Net
7.5
inches(Min)
inches(Max)
6.86
cm
/ 2.70 inches
kg
Tilt range
Swivel range
Height
Input
≤1W
With Stand
Rotate
Power
58W
:
≤1W
Sleep
Dimensions
Tilt/Swivel
1050@60Hz
x
DDC 2B
range
-5˚~25˚
350˚
80mm / 3.15 inches
90˚clockwise(Landscape
->
Portrait)
AC 100-240V~50/60Hz 1.2A
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
A18
Specifications
), Detached ( O )
Stand Base
Attached(
Signal cable
Attached( O ), Detached (
Power cord
Wall-outlet type
or
)
PC-outlet type
NOTE
Information in this document is
subject to change without
A19
notice.
Preset Modes
(Resolution)
L2000C/L2000CN monitor
1
640
x
350
31.47
70.09
2
640
x
480
31.47
59.94
3
640
x
480
37.50
75
4
720
x
400
31.47
70.08
5
800
x
600
37.88
60.32
6
800
x
600
46.88
75
7
832
x
624
49.72
74.55
8
1024
x
768
48.36
60
9
1024
x
768
60.02
75.03
10
1152
x
870
68.68
75.06
11
1152
x
900
61.80
65.96
12
1280
x
1024
63.98
60.02
13
1280
x
1024
79.98
75.02
*14
1600
x
1200
75.0
60
**15
1600
x
1200
75.0
60
*Analog Mode
L2000CE monitor
**Digital Mode
1
640
x
350
31.47
70.09
2
640
x
480
31.47
59.94
3
640
x
480
37.50
75
4
720
x
400
31.47
70.08
5
800
x
600
37.88
60.32
6
800
x
600
46.88
75
7
832
x
624
49.72
74.55
8
1024
x
768
48.36
60
9
1024
x
768
60.02
75.03
10
1152
x
870
68.68
75.06
11
1152
x
900
61.80
65.96
12
1280
x
1024
63.98
60.02
13
1280
x
1024
79.98
75.02
*14
1400
x
1050
65.3
60
**15
1400
x
1050
65.3
60
*Analog Mode
**Digital Mode
Specifications
Indicator
MODE
LED Color
On Mode
Blue
Sleep Mode
Amber
Off Mode
Off
Signal Connector
1
8
9
16
17
24
Pin
Assignment
DVI-D Connector
Pin
Pin
Signal(DVI-D)
Signal(DVI-D)
1
T. M. D. S. Data2-
16
Hot
2
T. M. D. S. Data2+
17
T. M. D. S. Data0-
3
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
4
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
5
T. M. D. S. Data4+
20
T. M. D. S. Data5-
6
DDC Clock
21
T. M. D. S. Data5+
7
DDC Data
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
8
Analog
Vertical
Sync.
9
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
Sync. and V. Sync.)
H.
T. M. D. S.
(Transition
Minimized Differential
A21
Signaling)
Plug
Detect
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications.
VESA wall
mounting
Connected to another
object (stand type
and wall-
mounted type. This monitor accepts a VESAcompliant mounting interface pad.- This has to be
purchased separately if required)
For further information, refer to the VESA
Mounting Instruction Guide.
Kensington Security Slot
a locking
cable that can be purchased
separately at most
Connected to
computer
stores
A22
Wall
Digitally yours
Download PDF

advertising