LG | L203WT-BF | LG L203WT-BF Owner’s Manual

User's Guide
L203WT
L203WTX
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached
dealer when you
on
the product and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
however
On
Use
Safety
only the power cord supplied
cord, make
that it is certified
sure
with the unit. In
by
the
you use another power
national standards if not being
case
applicable
If the power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
provided by the supplier.
manufacturer
or
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
technician for
plugs. They
replacement.
Do not
the
Open
may result in
are
a
dangerous. So
shock
or
are frayed power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the power
Contact your dealer if the display is not operating properly.
is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
only a stand recommended by the manufacturer.
Do not
Use
To Prevent Fire
or
Hazards:
display OFF if you leave the room for more than a short period
display ON when leaving the house.
children
from
Keep
dropping or pushing objects into the display's cabinet
Some
internal
openings.
parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
Always
turn the
of time. Never leave the
A1
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not
the display where the power cord is subject to damage.
Do not
use
this
display
sink, laundry tub, in
near
wet
water such as near a
basement,
place
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
a
or near a
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
can cause
Do not rub
mar, or
or
strike the Active Matrix LCD with anything hard
the Active Matrix LCD permanently.
Do not press the LCD
some
as
this may scratch,
damage
screen
with your
finger for a long
time
as
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Unfolding the stand
base
1.
Place the monitor with its front
2.
Hold down the release button inside the stand and
your two hands.
facing
downward
on a
cushion
strongly pull
or
soft cloth.
out the stand with
move if you don't press release button.
If the release button does not operate easily, fold the stand
The stand won't
a
bit more, and then press the release button.
Important
depicts the general model of connection. Your monitor may differ from
picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
This illustration
the items shown in the
A3
Connecting
the
Display
Before
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-5˚~20˚
Ergonomic
It is recommended that in order to maintain
position,
the forward tilt
angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
Connecting
the
Display
Using the Computer
1. Place the monitor in a convenient, well-ventilated location near your computer.
2. Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3. Connect the power cord into a proper power outlet that
the
is
easily accessible
and close to
display.
Digital signal
(Optional)
Analog signal
Varies according to model.
Wall-outlet type
1
2
PC-outlet type
PC
DVI-D cable (Optional)
PC
D-SUB cable
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
4.
Press
on.
button
Setting
the front switch
Function' is executed
NOTE
Self Image Setting
'
on
panel
to turn the power
When monitor power is turned on, the 'Self
Function'? This function
connects the monitor for the first
Image
automatically.
provides the
user
with
optimal display settings.When the
user
time, this function automatically adjusts the display to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SELECT' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option
on the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
'
A5
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power Indicator
This Indicator
lights
display
on or
up blue when the
off.
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
this indicator color
changes
to amber.
AUTO/SELECT
Button
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SELECT button before entering the On
Screen
Display(OSD). This will automatically adjust
display image to the ideal settings for the
current screen resolution size (display mode).
your
The best
display
20'1 inch monitor
A6
mode is
:
1680x1050
Control Panel Functions
Control
Function
Use these buttons to choose
Buttons
the On Screen
or
adjust
items in
Display.
Buttons
For
more
information, refer
to page A13
For
more
information, refer
to page A11
Buttons
PICTURE
MENU
MENU Button
Use this button to enter
or
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for serval seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for serval seconds. The message
"OSD UNLOCKED" should appear.
SOURCE
SOURCE hot
Button
Use this button to make D-sub
key
This feature is used when two
to the
display.
The default
A7
or
DVI connector active.
computers
setting
are
is D-sub.
connected
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
MENU
Display,
follow these steps:
AUTO/SETLECT
MENU
MENU
Press the MENU Button, then the main
To
access a
becomes
control,
use
the
menu
of the OSD appears.
Buttons. When the icon you want
Button.
or
highlighted, press the AUTO/SELECT
Use the
Accept
making image adjustments.
the
Buttons to
changes by pressing
Exit the OSD
by Pressing
adjust
the item to the desired level.
the MENU Button.
the MENU Button.
A8
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
Sub-menu
menu
PICTURE
AD
Reference
BRIGHTNESS
To
CONTRAST
contrast and gamma of the
adjust the brightness,
screen
GAMMA
COLOR
PRESET
6500K
To customize the color of
9300K
the
screen
RED
GREEN
BLUE
POSITION
TRACKING
SETUP
HORIZONTAL
To
VERTICAL
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity
stability of the screen
LANGUAGE
To customize the
screen
status for a user's
operating
OSD
HORIZONTAL
and
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
FLATRON
MOVIE / TEXT
F-ENGINE
USER
To select
desired
or
customize
image settings
NORMAL
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A9
the model
(A9~A13).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Press the MENU
Button, then the main menu of the OSD appears.
Menu Name
Icons
Sub-menus
NOTE
OSD
(On
Screen
Display)
menu
languages
on
A10
the monitor may differ from the manual.
On Screen
Display(OSD)
Main
menu
Selection and
Sub
Adjustment
Description
menu
PICTURE
of the
BRIGHTNESS
To
adjust
the
CONTRAST
To
adjust
the contrast of the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
brightness
screen.
screen.
display whitish images and low gamma
values display high contrast images.
COLOR
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
PRESET
?
?
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
BLUE
Set your
own
blue color levels.
POSITION
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
CLOCK
To minimize any vertical bars
stripes visible on the screen
and
right.
up and down.
TRACKING
background.The horizontal
change.
or
screen
size will also
PHASE
To
adjust
the focus of the
display.
This item allows you to remove any
horizontal noise and clear or
sharpen
A11
the
image
of characters.
On Screen
Display(OSD)
Main
menu
Selection and
Sub
Adjustment
Description
menu
SETUP
LANGUAGE
To choose the
control
OSD
POSITION
WHITE
BALANCE
language in which
displayed.
the
names are
To
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
the
level may deteriorate due to video
distortion. Using this function, the
signal
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
POWER
INDICATOR
are
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
FACTORY
RESET
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A12
on.
only when
On Screen
Display(OSD)
The OSD
right side
screen
Selection and
Adjustment
will appear when you touch the
button
on
the
of the monitor.
Menu Name
Icons
Sub-menu Name
FLATRON F-ENGINE
Screen when
applied
Screen when not
applied
When you execute F-ENGINE, two tones will appear
on the screen as shown. The applied screen will
appear
on
the left side, whereas the non-applied
on the right side.Touch the
will appear
SETbutton to use the
screen
Main
adjusted
screen.
Sub
menu
MOVIE
TEXT
Description
menu
This feature lets you easily select the best desired
image condition optimized to the environment
(ambient illumination, image types etc).
MOVIE: For animation
images
in videos
or
movies
TEXT: For text
USER
User
You
can
You
can save or
when
To
adjust the
USER sub-menu
function,
images (Word processing etc.)
...
Press the SET Button
...
...
manually adjust brightness, ACE or RCM.
restore the adjusted value even
using a different environment setting.
(Brightness): Adjusts screen brightness.
ACE(Adaptive Clarity Enhancer): Selects the clarity mode.
RCM(Real Color Management): Selects the color mode.
0
Not
1
Green enhance
applied
2
Flesh tone
3
Color Enhance
Select the SAVE sub-menu using the SET
button and save the YES value using the
buttons.
NORMAL This is under normal
A13
operating
conditions.
-
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
properly
see
if the power cord is connected
to the power outlet.
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on the screen?
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
Do you see a "CHECK
SIGNAL CABLE"
This message appears when the signal cable
between your PC and your display is not
message
screen?
Do you
on
the
see a
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
MENU button?
You
on
signal
cable and try
again.
the screen?
the current control
settings,
they
inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
can secure
that
cannot be
several seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SELECT button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
Check Control Panel --> Display --> Settings
and see if the frequency or the resolution were
changed. If yes, readjust the video card to the
recommend resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the AUTO/SELECT button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
Press the AUTO/SELECT button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Check if the
signal
cable is
properly connected
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
and
use a
the slot.
Set the color
color)
The
screen
blinks.
setting higher than 24
Settings.
at Control Panel
Check if the
screen
bits
(true
-
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It
has to be
A15
higher than
AC100-240V 50/60Hz.
Troubleshooting
Have you installed the
Have you installed the
display driver?
driver?
display
Be
sure
to install the
driver CD
display
your display. Or, you
driver from
Do you
see an
"Unrecognized monitor,
display driver from the
(or diskette) that comes with
Make
sure
Plug&Play
Plug&Play (VESA DDC)
monitor found"
message?
A16
our
can
web site:
also download the
http://www.lge.com.
to check if the video card
function.
supports
Specifications
Display
20.1 inches
Flat Panel Active matrix-TFT LCD
(51.0cm)
Anti-Glare coating
20.1 inches viewable
0.258mm
Sync Input
pixel pitch
Freq.
Analog : 28 83kHz (Automatic)
Digital : 28 83kHz (Automatic)
Vertical Freq.
56 85Hz (Automatic)
Input Form
Separate TTL,
Composite TTL
SOG (Sync On Green)
Digital
15 pin D-Sub Connector
Signal Input
DVI D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
Input Form
Horizontal
-
-
-
Video
Input
-
Resolution
D-Sub
VESA 1680 x 1050@60Hz
Digital VESA 1680 x 1050@60Hz
Recommend VESA 1680 x 1050@60Hz
Max
DVI
Plug&Play
Power
Consumption
On Mode
Mode
Off Mode
Range
Input
Environmental
Conditions
-
-
≤ 60W
≤1W
Sleep
≤1W
Full
&Weight
(with tilt stand)
Power
Analog
DDC 2B
Dimensions
Tilt
:
:
Up Position
Folded Position
Width
49.64
cm
/ 19.54 inches
49.64
cm
/ 19.54 inches
Height
Depth
40.21
cm
/ 15.83 inches
45.83
cm
/ 18.04 inches
24.14
cm
/ 9.50 inches
11.17cm / 4.39 inches
Net
7.1
Tilt range
-5˚~20˚
AC 100-240V
kg
50/60Hz 1.2A
~
Operating Conditions
10˚C to 35 ˚C
Temperature
10 % to 80 % non-Condensing
Humidity
Storage Conditions
-20˚C to 60 ˚C
Temperature
5 % to 90 % non-Condensing
Humidity
A17
Specifications
Tilt Stand
Attached( O ),
Detached
(
Signal cable
Attached(
Detached
(O)
Power cord
Wall-outlet type
),
or
)
PC-outlet type
NOTE
Information in this document is
subject
to
change without
A18
notice.
Preset Modes
(Resolution)
1
720
x
400
31.468
70
2
640
x
480
31.469
60
3
640
x
480
37.500
75
4
800
x
600
37.897
60
5
800
x
600
46.875
75
6
1024
x
768
48.363
60
7
1024
x
768
60.123
75
8
1152
x
864
67.500
75
9
1280
x
1024
63.981
60
10
1280
x
1024
79.976
75
*11
1680
x
1050
64.674
60
**12
1680
x
1050
65.290
60
*
**
Indicator
On Mode
Sleep
Mode
Off Mode
Blue
Amber
Off
Digital
Analog
Recommend Mode
Recommend Mode
How to Install the VESA Standard wall
This monitor meets
mounting
VESA-compliant mounting
interface
pad
specifications
1.
Please the monitor
front side
2. Separate
3.
on a
piece
facing downward.
the stand base using
Install the VESA standrad wall
of cloth
a
or
other soft surface with the
screwdriver
as
shown in the
picture.
mounting.
VESA wall
mounting
Connected to another
(stand type
object
and wall-mounted
type. This monitor accepts
a
VESA-compliant mounting
interface pad.- optional)
For further information, refer
the VESA Wall Mounting
Instruction Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased
separately at most
Connected to
computer
stores
A20
to
Digitally yours
Download PDF

advertising