LG | L2323T | LG L2323T Owner’s Manual

Table of Contents
Installation
and
Connection
Precautions
Safety
Accessories
Name and Function of the Parts
Connecting
to External Devices
Connecting
to your PC
Watching
VIDEO/DVD
Watching
HDTV
Watching
DVD
Watching
TV
(480p/720p/1080i)
(480i)
Name of the Buttons in the
Input
Selection
and
Tracking
OSD
(On
Screen
Display)
screen
Screen
Adjustment
Tracking
Adjusting
Screen CLOCK/PHASE and Audio function
Adjusting
Adjusting
the Position and
When
Options
Watching
VIDEO/DVD/HDTV/TV
Setting up the channel(When Watching TV)
Adjusting Screen Image and Audio function
Adjusting Options
Adjusting caption&vchip function
Setting a password
Closed Captions
Adjusting PIP/POP Mode Functions
-
-
Miscellaneous
Order
When Connected to your PC
Adjusting Screen Color
PIP/POP Mode Functions
Troubleshooting
Product
Specifications
Unit
Precautions
Safety
Please read these
before
safety precautions carefully
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
the monitor.
using
seriously injured
or
there is
a
possibility
of
ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in
installing
the Monitor
Warning
Keep away from
-
Electrical
heat
Keep the packing
-
like electrical heaters.
or
deformation may
anti-moisture material
occur.
vinyl packing out of the reach of children.
by mistake, force the patient to vomit and visit the
hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
Anti-moisture material is harmful if swallowed. If swallowed
nearest
Do not
-
sources
shock, fire, malfunction
put heavy objects
If the monitor collapses
on
is
or
the monitor
dropped,
or sit upon it.
you may be injured. Children must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the monitor in
-
Dust
or
moisture
neat and
a
can cause
If you can smell smoke
service center.
-
If you continue to
use
or
injury.
dry place.
electrical
shock, fire
other odors
without
or
taking
or
hear
or
a
product damage.
strange
sound
unplug
proper measures, electrical shock
or
the power cord and contact the
fire
can occur.
If you dropped the monitor or the case is broken, turn off the monitor and unplug the power cord.
If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
-
center.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the monitor, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the monitor, unplug the power cord and
-
contact the service center.
Caution
Make
sure
the monitor ventilation hole is not blocked. Install the monitor in
than 10cm from the
-
If you install the monitor too close to the
wall, it may be deformed
Do not block the ventilation hole of the monitor
-
The monitor
can
be deformed
Install the monitor
-
If the monitor is
a
suitably wide place (more
wall)
on a
or
fire
can
Install the monitor where
you may be
no
EMI
can
break out due to internal heat.
by a tablecloth or curtain.
overheating inside the
that has
place
injured or the
no
risk of
dropping
monitor may be broken.
occurs.
Keep the monitor away from direct
The monitor can be damaged.
fire
break out due to
flat and stable
dropped,
or
sunlight.
-
A1
monitor.
the monitor.
ENGLISH
Electrical Power Related Precautions
Warning
Make
-
sure
to connect the power cable to the
You may be electrocuted
Use the rated
-
The monitor
During
-
a
or
voltage only.
be damaged,
can
thunder
or
grounded
current.
injured.
or
you may be electrocuted.
lightning storm, unplug the power cable or signal
You may be electrocuted
or a
fire
can
Do not connect several extension
cable.
break out.
cords,
electrical
appliances or electrical heaters to a single
use with the computer.
outlet. Use
power bar with a grounding terminal designed for exclusive
A fire can break out due to overheating.
-
Do not touch the power plug with wet hands. Additionally, it the cord
the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
pin
is wet
or
covered with
dust, dry
-
If you don't intend to use the monitor for a long time, unplug the power cable from the monitor.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
Hold the
plug
heavy objects
-
on
The power line
Do not insert
a
fire
break out.
can
when
pulling out the power cable. Do not bend the power cord with excessive force
the power cord.
can
be
damaged, which
may
cause
electric shock
or
put
fire.
(like a metal chopstick) into one end of the power cable while the other end
input terminal on the wall. Additionally, do not touch the power cable right after
plugging into the wall input terminal.
a
conductor
or
connected to the
-
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the monitor
can damage the monitor.
is in
use.
Electrical shock
Precautions in
Moving
the Monitor
Warning
Make
-
Make
-
sure
to turn off the monitor.
You may be electrocuted
sure
to
remove
or
the monitor
all cables before
You may be electrocuted
or
the monitor
can
be
damaged.
moving the monitor.
can be damaged.
A2
is
a
Precautions
Safety
Caution
Do not shock the monitor when
-
You may be electrocuted
Do not
or
moving
the monitor
dispose the product-packing
it.
can
be
damaged
box. Use it when you
move.
Make the
-
panel face forward and hold it with both hands to move.
If you drop the monitor, the damaged monitor can cause electric shock or fire.
repair.
Precautions in
Contact with the service center for
the Monitor
Using
Warning
Do not
-
-
Fire
disassemble, repair or modify the
or
electric shock accident
Contact the service center for
monitor at your
discretion.
own
can occur.
check, calibration
Do not spray water on the monitor
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene).
Fire
or
Keep the
-
Fire
or
monitor away from water.
electric shock accident can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
danger of explosion or fire
near
due careless
the monitor.
handling of the
When
cleaning the brown tube surface, unplug the power cord
scratching. Do not clean with a wet cloth.
-
The water
Take
a
can
sink into the
monitor, which
rest from time to time to
protect
Keep
the monitor clean at all times.
Take
a
comfortable and natural
Take
a
regular
Do not press
scratch on it.
break when
the
position
panel
when
a
with
-
-
appropriate
Your vision
can
Use authorized
-
be
electric shock
can cause
resolution and clock
working with
monitor for
a
Keep the proper distance from the monitor.
Your vision may be impaired if you look at the
Set the
and scrub with soft cloth to
or
prevent
serious malfunction.
your vision.
working with
strongly upon
inflammable substances.
hand
or
a
monitor to relax the muscles.
long time.
sharp object such
monitor too
by referring
a
as
nail, pencil
or
pen,
make
closely.
to the User's Manual.
impaired.
detergent only when cleaning the
monitor.
(Do
not
use
benzene,
thinner
or
alcohol.)
Monitor can be deformed.
On
or
Disposal
The fluorescent
lamp used in this product contains a small amount of mercury.
dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
Do not
A3
a
Accessories
Please check the accessories in the
*
The monitor and the accessories
product package.
can
be different from the
figures
shown here.
*
Display
Media Station
Remote control /
Batteries
P&D cable
user's Manual/
Colorific CD/
Diskette/Cards
Color Card
Power Cord
S-Video Cable
15-pin D-Sub Signal Cable
DVI-D
Signal
(AAA x 2)
Cable
RCA Cable
Audio Cable
(PC)
Speakers
Please
see
the
Speaker User Manual
the speaker box) to reference
(included in
speaker accessory
the
A4
list.
ENGLISH
Name and Function of the Parts
Remote Control
For detailed instructions of each button
on
the remote
control, refer to the
appropriate pages of this manual.
Power On/Off Button
Mute button
?
Input
Select Button
?
TV/AV Button
Sleep
Button
When
watching
(See
next
automatically
period of
turned off after a certain
page)
time.
Press this button
?Menu Button
?
AV/DVD/HDTV/TV
The monitor will be
-
select
Exit Button
an
repetitively to
appropriate time duration
PSM Button
When
watching
AV/DVD/HDTV/TV
Volume
Button
Automatically adjusts the image.
repetitively to
set the intended screen. (See
A28)
-
Press this button
Set Button
Channel
Up/Down
Button
Auto Channel Button
Channel Number Select
TV: Automatic TV channel
Button
Operational
at the TV mode
setup(Applicable to the model
equipped with the TV tuner)
PC: Automatic adjustment
function(Operational for
the analog signal only)
only
Sound Mode Select
Select the sound mode
:
MONO/STEREO/SAP
CAPTION Button
(See A30)
Video
Operation Button
Applicable for LG products only
A5
Remote Control
ENGLISH
?
Input
Select Button
?
If you press the button once,
the following Input Signal
This button will be enabled
using
only
when you select the TV/AV
signal. The signal type will be
Window will appear. Select
the signal type you want
the
TV/AV Button
changed
with the
order. Set the
button.
following
signal type you
want.
HDTV > S-VEDIO >VIDEO > DVD > TV
DSUB ANALOG
VIDEO
DVD
1.
PIP
YPbPr
(Picture
in
The sub-screen
:
2.
SMALL
POP
->
(Picture
POP1
->
moves
LARGE
out
The sub-screen
:
Picture)
->
OFF
Picture)
moves
POP2
Button
to the next mode whenever you press this button.
->
Button
to the next mode whenever you press this button.
POP3
->
POP4
->
OFF
A6
Name and Function of the Parts
3. Swap
You
Button
swap the main
can
screen
and the sub-screen when the PIP/POP function is used..
PIP
SWAP
POP
When the
signal of SOURCE 1 is supplied to the main-screen, the sub-screen receives the signal of
only. Conversely, when the signal of SOURCE 2 is supplied to the main-screen, the subscreen only receives the signal of SOURCE 1. The positions of SOURCE 1 and SOURCE 2 can be
transposed by selecting SWAP.
SOURCE 2
SOURCE2
SOURCE1
D-SUB
DVI-D
HDTV S-VIDEO VIDEO DVD
TV
D-SUB
DVI-D
HDTV
S-VIDEO
VIDEO
DVD
TV
[Table of PIP/POP Function Support]
Inserting
batteries into remote controller.
1. Take out the
battery cap.
2. Insert the
battery with
3. Close the
battery cap.
?
You
can use a
within the
?
Dispose
correct
polarity (+/-).
remote controller 7 meter distance and 30
unit scope.
of used batteries in the
degree (left/right)
receiving
A7
recycle
bin to
prevent environmental pollution.
This section shows you how to
Operating with the
use
the remote control.
Remote Control
Point the remote control at the remote
Within about 23ft
TV/AV
and press the buttons.
sensor
(about 7m)
I/II
*/SSM
Distance
Angle
:
:
About 23 ft
(7 m) from
the front of the remote
sensor.
About 30° in each direction of the front of the remote
sensor.
Do not expose the sensor of remote control in the monitor to a strong light source such as
direct sunlight or illumination. If so, may not be able to operate the monitor with the remote
control.
Note
Do not
drop the remote control
handle it
roughly.
extremely hot or humid conditions.
Do not expose the remote control to water or anything wet.
or
Do not leave the remote control in
A8
ENGLISH
Connecting to
External Devices
Media Station Rear
Fan: Should the temperature of the media
station rise above a preset level, the fan will
start up automatically to cool down the
unit.
Connect the P&D cable
Connect to the
speaker including
a
built-in
amplifier(AMP)
AV
Input ports
PC
signal inputs
(Video)
AV
Connect the audio cable to the *LINE
OUT jack of the PC sound card.
AV1
DVD(YPbPr) Input ports
-
480i
Power cut-off switch of the monitor
Connect various cables and the power cord and turn
on before using the monitor. Please turn the switch
off if you intend not to use it for an extended
of time to reduce power consumption.
period
HDTV(YPbPr) Input ports
480p/720p/1080i
-
Connect the antenna cable
(not included)
Connect the power cord
*LINE OUT
A terminal used to connect to the
speaker including a built-in amplifier (Amp). Make sure that
connecting terminal of the PC sound card is checked before connecting. If the Audio Out of
PC sound card has only Speaker Out, reduce the PC volume.
the
If the Audio Out of the PC sound card
the card
jumper of the
program
supports both Speaker Out and Line Out,
(Refer to the
Sound Card
A9
Manual).
convert to Line Out
using
Connecting
Before
to your PC
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices are turned off.
1.
Connect the P&D
secure
(Plug
and
Display) cable.
When attached,
tighten
the thumbscrews to
the connection.
Media Station Rear
P&D cable
2. Connect the signal cable
A
When
connecting D-SUB signal
cable
PC
Media Station Rear
MAC
Mac adapter (not
included)
For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector
on the supplied cable to a 15 pin 2 row connector.
B
When
connecting
DVI-D
signal
cable
Media Station Rear
PC
A10
ENGLISH
Connecting to
3.
Connect the power cord into
the
a
External Devices
proper power outlet that is
easily accessible
display.
Media Station Rear
4. Turn the
media station power
on.
Media Station Rear
5. Select
an
input signal.
Press the SOURCE button
A
When
the remote control to select
an
input.
signal cable
15-pin D-sub analog signal
When connecting DVI-D signal cable
DVI-D DIGITAL: DVI-D digital signal
?
B
on
connecting
D-SUB
DSUB ANALOG:
?
DSUB ANALOG
STEP
VIDEO
SET
DVD
A11
YPbPr
and close to
Connecting the Speakers
ENGLISH
Connect the audio cable.
AV
(Video)
AV1
A12
Connecting to
External Devices
Watching VIDEO/DVD
1.
A When
connecting RCA
cable
Connect the each audio/video output jack of the VIDEO/DVD to the
corresponding input port as shown on the Display (or Media station).
Media Station Rear
VIDEO/DVD
Red
RCA cable
White
Yellow
B When
connecting S-Video cable
input port
If you connect the S-Video
improved definition image.
to external
equipment, you
can
VIDEO/DVD
Media Station Rear
S-Video cable
Red
White
2. Select
an
input signal.
Press the SOURCE button
on
the remote control to select
A
When connecting RCA cable
?
VIDEO
B
When connecting S-Video cable
?
S-VIDEO
an
input.
DSUB ANALOG
STEP
VIDEO
DVD
SET
A13
YPbPr
have
an
Watching
1.
HDTV
(480p/720p/1080i)
Connect both HDTV cable
(or
(Y/Pb/Pr) and audio cable (Audio L/R) to
Set-top box jack.
the
Media station) jack and the
Red
Audio cable
R
Audio
(not included)
White
L
HDTV(720p/18i) Pb r
Red
HDTV cable
Blue
(not included)
Green
Y
an
input signal.
Press the SOURCE button
?
HDTV
Set-Top
(Optional)
Media Station Rear
2. Select
Display
on
the remote control to select
an
input.
HDTV YPbPr
STEP
DSUB ANALOG
SET
VIDEO
DVD
A14
YPbPr
ENGLISH
External Devices
Connecting to
Watching
DVD
(480i)
Take these connection steps if the DVD
output is 480i only.
1. Connect
RCA
player
has
a
RCA
jack
and the
jack.
DVD(480i)
Audio cable
Red
(not included)
White
Red
HDTV cable
DV(480i)
2. Select
an
Green
input signal.
Press the SOURCE button
?
(not included)
Blue
on
the remote control to select
an
input.
DVD YPbPr
STEP
DSUB ANALOG
SET
VIDEO
DVD
A15
YPbPr
Watching
Before
TV
setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices are turned off.
1.
Connect the antenna.
Media Station Rear
TV tuner jack
Antenna
(not included)
2. Select
an
input signal.
Press the SOURCE button
on
the remote control to select
an
?TV
DSUB ANALOG
STEP
SET
VIDEO
DVD
A16
YPbPr
input.
ENGLISH
Selecting and Adjusting the Screen
Name of the button in the Screen
Control
Adjustment
Unit
Function
Source Selection:
Use this button to select
DSUB ANALOG
?
DSUB ANALOG:
?
DVI-D DIGITAL:
?
HDTV YPbPr: HDTV
?
S-VIDEO: S-Video
?
VIDEO
?
DVD YPbPr
VIDEO
DVD
YPbPr
:
an
input signal.
15-pin D-sub analog signal
DVI-D digital signal
CVBS
DVD
:
?TV:TV
PIP
(Picture
in
Picture)
The sub-screen is
SMALL
:
->
function
changed
LARGE
->
in the order shown below.
OFF
The
positions of SOURCE 1 and SOURCE 2 can be
transposed by selecting SWAP on the remote control.
POP
(Picture
out
The sub-screen is
:
POP1
->
POP2
function
Picture)
changed
->
POP3
The
in the order shown below.
->
POP4
->
OFF
positions of SOURCE 1 and SOURCE 2 can be
transposed by selecting SWAP on the remote control.
A17
Control
Function
Use this button to enter
MENU Button
or
exit the On Screen
Display.
Bring up Contrast and Brightness adjustment. It is available to the
PC signal inputs only.
CH. / CH. + : To adjust the brightness
CH. -/CH.+
VOL. / VOL. + : To adjust the contrast
?
-
-
?
Use these buttons to go up and down the channel when the TV
source is available.
CH. -/CH.+
VOL. -/VOL.+
Use these buttons to decrease
or
Use these buttons to choose
or
the On Screen
AUTO
increase the volume level.
adjust
items in
Display.
adjustment
function
When
adjusting your display settings, always press the
AUTO/SELECT button before entering the On Screen
Display(OSD). This will automatically adjust your display image
settings for the current screen resolution size (display
mode). It is available to the PC signal inputs only.
to the ideal
The best
display
mode is 1280x768 @60Hz.
Use this button to enter
a
selection in the On Screen
Display.
Power Button
Power
(DPMS)
Indicator
Use this button to turn the
display
on or
off.
This Indicator
If the
color
lights up blue when the display operates normally.
display is in DPM (Energy Saving) mode, this indicator
changes to amber.
Remote Control Sensor
CONTROLS LOCKED/UNLOCKED
:
MENU and VOL.+
This function allows you to
that
they
cannot be
secure
the current control
inadvertently changed.
settings,
so
Press and hold the
MENU button and VOL.+ button for 5 seconds: the message
"CONTROLS LOCKED" appears.
You
can unlock the OSD controls at any time
button and VOL.+ button for 5 seconds:
by pushing
the message "CONTROLS UNLOCKED" will appear.
A18
the MENU
ENGLISH
Selecting and Adjusting the Screen
OSD
(On Screen Disply) Screen Tracking Order
Making adjustments to the image size, position and operating parameters of the
display is quick and easy with the On Screen Display Control system. A short example
is given below to familiarize you with the use of the controls. The following section is
an outline of the available adjustments and selections you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display,
follow these steps:
CH
CH
SET
SET
SET
CH
access a
control,
highlighted, press
Use the
Accept
the
use
the
or
menu
of the OSD appears.
Buttons. When the icon you want becomes
the SET Button.
Buttons to
changes by pressing
Exit the OSD
SET
CH
Press the MENU Button, then the main
To
making image adjustments.
by Pressing
adjust
the item to the desired level.
the SET Button.
the EXIT Button.
A19
The
following table indicates all the On Screen Display control, adjustment, and setting
menus.
ENGLISH
Using the computer
Main
menu
Sub
A
menu
Reference
To
CONTRAST
CONTRAST
BRIGHTNESS
BRIGHTNESS
COLOR
PRESET
ADJUSTMENT
D
adjust
the
brightness
contrast of the
9300K
and
screen
To customize color of the
screen
6500K
R/G/B(User Color)
IMAGE
HORIZONTAL
To
POSITION
VERTICAL
screen
TRACKING
AUTO
adjust the position
of the
To
improve the clarity and
stability of the screen
CLOCK
PHASE
AUDIO
MUTE
To
adjust the
audio function
VOLUME
BBE EFFECT
AVL
SSM
BASS
TREBLE
SETUP
LANGUAGE
To customize the
IMAGE SIZE
for
a
To
adjust the
user's
screen
operating
status
environment
OSD POSITION
TRANSPARENCY
ZOOM
PIP/POP
PIP MODE
PIP/POP of the
POP MODE
:
Adjustable
A
:
Analog Input
D
:
Digital Input
NOTE
The order of icons may differ
depending
on
the model
A20
(A19~A35).
screen
Selecting and Adjusting the Screen
Using the VIDEO/DVD/TV/HDTV
Mainmenu
CHANNELSETUP
Submenu
V
H
T
CHANNEL
Reference
To select the TV channel
adjust
ADD/DEL CH.
the channel
settings
quality.
and
AUTO CHANNEL
SELECT
FINE TUNE
PSM
ADJUSTMENT
CONTRAST
To
improve the clarity and stability of
the
screen
To
adjust the
BRIGHTNESS
SHARPNESS
COLOR
TINT
AUDIO
SOUND
audio function
VOLUME
BBE EFFECT
AVL
SSM
BASS
TREBLE
SETUP
LANGUAGE
IMAGE SIZE
To customize the
OSD POSITION
user's
TRANSPARENCY
operating
screen
status for
a
environment
COLOR
CAPTION
PARENTAL
PIP/POP
PIP MODE
To
adjust the
PIP/ POP of the
POP MODE
:Adjustable
V:VCR/DVD
A21
T:TV
H:HDTV
screen
procedure of selecting and adjusting an item using the OSD
system. Listed below are the icons, icon names, and icon descriptions of the all items
You
introduced to the
were
shown
on
the Menu.
When Connected to your PC
To
adjust the brightness and
OSD
contrast of the
Adjust
screen
Description
BRIGHTNESS
To
the
adjust
brightness
of the
screen.
CONTRAST
To
To customize the color of the
OSD
Description
RED/GREEN/BLUE
Set your
own
9300K
Select the
6500K
?
9300K:
?
6500K:
adjust the position of the
OSD
screen.
screen
Adjust
USER
To
the contrast of the
adjust
color levels.
colour.
screen
Slightly
Slightly
bluish white.
reddish white.
screen
Adjust
Description
Horizontal Position
To
move
image
left and
right.
Vertical Position
To
move
A22
image
up and down.
ENGLISH
Selecting and Adjusting the Screen
To
improve
OSD
the
clarity
and
stability
of the
Adjust
Description
This function is suitable for
AUTO
only.
the
analog signal input
adjustment
and phase.
This button is for the automatic
clock
position,
screen
of
To minimize any vertical bars or stripes visible on
the screen background.The horizontal screen size
CLOCK
will also
To
PHASE
change.
the focus of the
adjust
you to
display.
This item allows
any horizontal noise and clear
the image of characters.
remove
sharpen
To
screen
or
adjust the audio function
OSD
Adjust
Description
Used to select mute
MUTE
off
sound
(means
VOLUME
To decrease
BBE
To
or
on
(means
sound
off)
and mute
on).
increase volume level.
AVL
SSM
USER
EFFECT
AVL
To
adjust
uneven
improve
quality.
sound volumes
to the most
the RV
SSM
appropriate level.
onput signal only.)
The best sound tone
video
?
quality
To
the
across
use
this
clarity
and distinction of audio
all channels
will be selected
Flat
Music
Select this option to enjoy the original sound when
?
listening to the music.
Movie
Select this option to enjoy sublime sound.
?
Speech
Select this option to watch sports
?
broadcasting.
User
Select this option to
use
the user-defined audio settings.
BASS
To decrease
or
increase bass level.
TREBLE
To decrease
or
increase treble level.
A23
signals automatically
automatically depending
type that you're currently watching.
The most commanding and natural audio.
?
or
feature, select ON. (It is adjustble
on
the
to
To customize the
OSD
screen
status for
a
user's
Adjust
operating environment
Description
LANGUAGE
To choose the
names are
IMAGE SIZE
language
displayed.
To select the
image
in which the control
size of the
screen.
FULL/4:3/ SPECTACLE /1:1
The SPECTACLE
menu
resolution ratio is 4:3
1280X1024 64KHZ 60HZ
1024x768)
OSD POSITION
To
adjust position
Press the
of the OSD window
button to
display
on
the
screen.
the submenu
for OSD POSITION.
TRANSPARENCY
To
adjust
the
transparency of the OSD
menu screen.
ZOOM
To
adjust horizontal and vertical image size
simultaneously. If you want to move the zooming
point, use the H/V POSITION function in the sub-menu.
However, if the monitor turns off when zooming in
and out the screen, the monitor will be returned to
original
screen.
A24
is used when the
(640x480,
800x600 and
ENGLISH
Selecting and Adjusting the Screen
To
adjust the PIP(Picture
OSD
in Picture) of the
Adjust
screen
Description
To
adjust the
PIP MODE submenu
SMALL
function, Press the OK
button
on
-->
the remote control
After selecting ON in the PIP ON/OFF menu, the following
menu
items can be
PIP SOURCE
To select
an
PIP SIZE
To
adjust
the size of the PIP
screen:
SMALL/LARGE
PIP POSITION
To
adjust
the
screen.
Press the
input signal
position
adjusted.
for PIP.
of PIP
button to
display
the
submenu for PIP POSITION.
PIP IMAGE
To
button to display the
adjust the image of the PIP screen; Press the
submenu for PIP IMAGE. The items of the sub-menu may vary depending on
the type of the source.
PSM
:
Select
a picture mode of your choice among DYNAMIC, STANDARD, MILD and
GAME, or select 'USER' and adjust the values of CONTRAST, BRIGHTNESS,
SHARPNESS, COLOR and TINT.
PSM
USER
CONTRAST
To
adjust the
BRIGHTNESS
To
adjust the brightness
SHARPNESS
To
In
adjust the
case
contrast of the
To
TINT
To
adjust the
adjust the
of the
clearness of the
the PIP
source
SHARPNESS is not
COLOR
is
screen.
screen.
HDTV,
supported.
color to desired level.
tint to desired level.
This function is available
broadcasting
mode.
PIP SOUND
To turn the PIP sound on/off.
PIP SWAP
To switch the main-screen and sub-screen in PIP mode.
A25
screen.
only
in
NTSC
To
adjust the POP(Picture out Picture) of the screen
OSD
Adjust
To
adjust the
POP MODE submenu
function, Press the OK
button
on
-->
the remote control
After selecting ON in the POP ON/OFF menu, the following
POP SOURCE
To select
an
POP SIZE
To
the size of the POP
POP IMAGE
To
adjust
ENGLISH
Description
input signal
menu
items can be adjusted.
for POP.
screen:
POP1/POP2/POP3/POP4
button to display the
adjust the image of the POP screen; Press the
submenu for POP IMAGE. The items of the sub-menu may vary depending on
the type of the source.
PSM
:
Select
a picture mode of your choice among DYNAMIC, STANDARD, MILD and
GAME, or select 'USER' and adjust the values of CONTRAST, BRIGHTNESS,
SHARPNESS, COLOR and TINT.
PSM
USER
CONTRAST
To
adjust the
BRIGHTNESS
To
adjust
the
SHARPNESS
To
adjust the
In
case
contrast of the
brightness
clearness of the
the POP
SHARPNESS is not
COLOR
To
TINT
To
source
screen.
screen.
is
HDTV,
supported.
adjust the color to desired level.
adjust the tint to desired level. This
function is available only in NTSC
broadcasting mode.
POP SOUND
To turn the POP sound on/off.
POP SWAP
To switch the main-screen and sub-screen in POP mode.
A26
screen.
of the
Selecting and Adjusting the Screen
When
watching VIDEO/DVD/HDTV/TV
To select TV channel
OSD
CH
settings
and
adjust the channel quality
Adjust
CHANNEL SETUP
CHANNEL
4
ADD/DEL CH.
DEL
AUTO CHANNEL
OFF
SELECT
CABLE
Description
CHANNEL
To
ADD/DEL CH.
To add / delete the selected channels.
AUTO
To
CHANNEL
Select On
to start automatic channel
SELECT
To select the channel
reception type.
:
FINE TUNE
change
the channel.
automatically
using
search the available channels.
setup.
CABLE / AIR
To
adjust the channel quality.
Adjust the screen using
screen.
A27
until you
can see a
sharp
To
improve
OSD
the
clarity
and
Adjust
CH
screen
Description
PSM
USER
PSM
of the
stability
Select
mode of your choice among DYNAMIC,
STANDARD, MILD and GAME, or select 'USER' and adjust
the values of CONTRAST, BRIGHTNESS, SHARPNESS,
picture
a
COLOR and TINT.
CONTRAST To
adjust the
contrast of the
BRIGHTNESS To
adjust the brightness
SHARPNESS To
adjust the
clearness of the
COLOR
To
adjust the
color to desired level.
TINT
To
adjust the tint to desired level. This
only in NTSC broadcasting
screen
of the
screen.
screen.
available
To
function is
mode.
adjust the audio function
OSD
Adjust
CH
CH
SOUND
AVL
SSM
USER
Description
SOUND
MONO / STEREO / SAP
VOLUME
To decrease
BBE
To
improve
or
the
increase volume level.
clarity
and distinction of audio
quality.
EFFECT
AVL
Use this function to
relayed unevenly
most appropriate
SSM
Select
TREBLE
level
can
be selected.
sound mode of your choice among FLAT,
or select 'USER' and
MUSIC, MOVIE and SPEECH,
adjust
BASS
a
automatically adjust volume being
or signal so that the
for each channel
the values of BASS and TREBLE.
To decrease
or
increase bass level.
To decrease
or
increase treble level.
A28
ENGLISH
Selecting and Adjusting the Screen
To customize the
screen
status for
a
user's
Adjust
OSD
operating environment
Description
LANGUAGE
CH
To choose the
are
To select the
IMAGE SIZE
language
in which the control
names
displayed.
image
size of the
screen.
FULL/4:3/ SPECTACLE /ZOOM1/ZOOM2.
SPECTACLE, ZOOM1, ZOOM2 functions
CAPTION
useful for TV
PARENTAL
or
motion
PC environments such
word
pictures,
as
are
but not suitable for
computer graphics
or
processing.
FULL
You
can
enjoy the picture (format
of
4:3)
or
general
TV in 16:9 mode.
4:3
This
picture
format is 4 to 3 of
general
TV
SPECTACLE
This function
provides different areas of the screen with a varied ratio, so that the ratio at the central area is close to 4:3
edges it exceeds 16:9. Since most people concentrate their focus upon the central area of the screen, they
do not clearly recognize a nonlinear expansion of the image near the edges of the display. Therefore a 4:3 image can fit
into the wide screen naturally.
and
near
the
ZOOM 1/ZOOM 2
Zoom 1 and 2
conventional
Input
functions, which keeps the input ratio constant at 16:9 while zooming in; these functions, unlike
in function, minimize the image distortion usually seen in the zooming process.
be controlled only in S-VIDEO,TV,VIDEO,DVD states.
are
zoom
source can
OSD POSITION
To
CH
adjust position
Press the
of the OSD window
button to
display
on
the
screen.
the submenu
for OSD POSITION.
TRANSPARENCY
To
adjust
the
transparency of the OSD
menu screen.
COLOR
To select the
?
9300K:
screen
Slightly
color.
bluish white.
?
6500K:
Slightly
A29
reddish white.
To customize the
OSD
screen
status for
user's
a
Adjust
operating environment
Description
CH
CH
To
adjust the CATION
MODE
submenu function, Press the OK
button
>
CAPTION
CAPTION/TEXT
CC1
CAPTION
OFF
KEY LOCK
OFF
--
the remote
control
PARENTAL
CAPTION/TEXT
on
ENGLISH
CAPTION
CH
Use the
buttons to select
caption mode.
variety of information on all kind of subjects(ex. captioned program
lists, weather forecasts, stock exchange topics, news for hearing-impaired....) on up to half of the
TV screen. But not all stations offer text services, even though they might offer captioning.
In the event you are receiving a poor signal, an empty black box may appear and disappear,
even when the text mode is selected. This is a normal when receiving a poor signal.
This TV is programmed to remember the CAPTION/TEXT mode it was last set to, when you
Text services
give
a
wide
turn the power off.
CAPTION
Use the
buttons to select
captions.
[Remote Control]
Press the CAPTION button
repeatedly to display the caption option
as
shown below.
*CCEZMUTE
:
If sound is on, the
KEY LOCK
caption
Use the
will be off. On the
buttons to select ON
or
OFF. The TV
the remote control. This feature
can
In order to lock the OSD
adjustment,
In order to unlock
-
PARENTAL
contrary, if sound is off, the caption will be
Push the
menu
screen
it, do the following
button
on
can
be set up
so
that it
can
on.
only
be used with
prevent unauthorized viewing.
set the KEY LOCK tab to the 'on'
position.
:
the remote control and set KEY LOCK to the 'off'
position.
This Function is used to block program viewing based on the ratings sent by the broadcast
station. The default setting is to allow all programs to be viewed. Viewing can be blocked by
the
type of program and by the categories chosen
program
viewing
for
a
time
to be blocked. It is also
possible
to block all
period.
CH
CH
CH
PARENTAL
CAPTION
PARENTAL
Select the PARENTAL
password
menu
and click
is entered, sub-menu that allows
for '7777' and it
can
be
changed through
button. The 'ENTER CODE' window will appear. Once the correct four-digit
a user to control various blocks will be enabled. The initial password is set
'SET PASSWORD'
menu.
A30
(A31)
Selecting and Adjusting the Screen
-
V-CHIP rating and categories
Rating guidelines are provided by broadcast station. Most television programs and television
movies can be blocked by TV rating and/or individual categories. Movies that have been shown
the theaters or direct-to-video movies use the Movies Rating System(MPAA) only.
For movies
previously
shown in theaters.
Movie
MPAA
PARENTAL
CH
CH
-
Ratings
-
-
:
General audience
PG&
:
Parental
PG-13&
:
13 years and up
Restricted
-R&
-
:
NC-17&
-X
If you set PG-13&
available : PG-13,
PARENTAL
CH
AGE BLOCK
GENERAL TV
-
-
-
-
-
-
17years
:
Adult
,
G&
guidance suggested
and up
and PG movies will be
R, NC-17, and X will be blocked.
PARENTAL
:
:
General audience / Individual
TV-PG&
:
Parental
TV-14&
:
TV-MA
:
14 years and up
Mature audience
do not
categories
apply.
guidance suggested
UNBLOCKED
Rating
:
TV-Y&
:
Youth / Individual content
TV-Y7
:
Youth,
categories
do not
apply.
7 years and up.
UNBLOCKED
CH
CONTENT
BLOCK
:
C
CH
TV-G&
CHILDREN TV
-
Rating
:
UNBLOCKED
-G&
-
CONTENT
-
PARENTAL
Categories
PARENTAL
CH
:
: Applies to TV-PG&
TV-14.
DIALOGUE(sexual dialogue)
: Applies to TV-PG&
TV-14&
LANGUAGE(adult language)
SEX SCENE(sexual situations) : Applies to TV-PG&
TV-14&
VIOLENCE
: Applies to TV-PG&
TV-14&
F VIOLENCE(fantasy violence) : Applies only to TV-Y7.
NO RATING
: Blocks all viewing.
,
-
,
-
,
-
,
-
-
at
A31
,
TV-MA.
TV-MA.
,
,
TV-MA.
setting
a
password
PARENTAL
CH
CH
SET
This
PASSWORD
correct current
LOCK
To select the VCHIP function ON/OFF.
change passwords. Once the
using the number panel
in a remote control, the window for new password will
appear. Enter your choice of new four-digit password.
menu
is to be used to
password
is entered
ON/OFF
You control
change
the
access
to the
password
1.
Open
the
menu. ->
the OSD.
parental controls with
four-digit number.
a
password.
The default
passworld
is '7777'. You
can
to any
->
Press the
Press the
buttons to select the SETUP menu, then press SET to open
buttons to select the PARENTAL
sub-menu, then press the
button to open
the sub-menu.
2.
3.
Use the number
Press the
setting.
4.
pad
to enter your
when
prompted.
buttons to select the SET PASSWORD
Use the number button
Re-enter the
password
new
pad
to enter
four-digit password
when
a new
If you have not set
sub-menu, then press the
four-digit password
prompted.
A32
when
a
passwod,
enter 7777.
button to
prompted.
change
the
ENGLISH
Closed
Captions
Closed captioning is a process which converts the audio portion of a television program into written
words which then appear as subtitles on the television screen. Closed captions allow viewers to read
the dialogue and narration of television programs.
Using
Closed
Captions
dialogue and narration of television programs. For prerecorded
be arranged into captions in advance. It is possible to caption a live
program by using a process called real-time captioning, which creates captions instantly. Real-time
captioning is normally done by professional reporters using a machine shorthand system and
computer for translation into English.
Captioning is an effective system for the hearing-impaired, and it can also aid in teaching language
Captions
are
the subtitles of the
programs, program
dialogue
can
skills.
Caption Tips
1.
Not all TV broadcasts include closed
2.
Sometimes TV stations broadcasts four different
From CC1
signal
CC4, TEXT1
~
with the
captions,
caption signals.
caption signals
the
on
same
channel.
By selecting
TEXT4 you can choose which signal you view CC1 is usually the
while Another mode might show demonstration or programmimg
~
information.
3.
Your TV
Poor
might
reception
IGNITION
-
not receive
conditions
caption signals normally
are
encountered
in the
following
situations.
:
:
Picture may flutter, drift, suffer from black spots, or horizontal streaking. Usually caused by
interference from automobile ignition systems, neon lamps, electrical drills, and other electrical
appliances.
GHOSTS
-
Ghosts
:
are
caused when the TV
signal splits and follows two paths. One is the direct path and the
buildings, hills or other objects. Changing the direction or position of the
improve reception.
other is reflected off tall
antenna may
-SNOW:
If your receiver is located at the weak, fringe area of a TV signal, your picture may be marred
small dots. It may be necessary to install a special antenna to improve the picture.
An old, bad or illegally recorded tape is playing.
Strong, random signals from a
signal from the antenna is
The program wasn't captioned
The
car or
airplane
interfere with the TV
signal.
weak.
when it
was
produced, transmitted,
or
taped.
by
To
adjust the PIP(Picture
OSD
in Picture) of the
Adjust
screen
Description
CH
CH
To
adjust the
function, Press the OK
button
on
DSUB
PIP MODE submenu
-->
the remote control
After selecting ON in the PIP ON/OFF menu, the following
menu
items can be
PIP SOURCE
To select
an
PIP SIZE
To
adjust
the size of the PIP
screen:
SMALL/LARGE
PIP POSITION
To
adjust
the
screen.
Press the
input signal
position
adjusted.
for PIP.
of PIP
button to
display
the submenu for PIP POSITION.
CH
CH
PIP IMAGE
To
button to display
adjust the image of the PIP screen; Press the
the submenu for PIP IMAGE. The items of the sub-menu may vary
depending on the type of the source. In case the PIP source is D-SUB or
DVI-D, PSM, COLOR and TINT MENU
CH
CH
are
not
supported.
CONTRAST
To adjust the contrast of the
BRIGHTNESS
To adjust the
This function is available
only
in NTSC
mode.
PIP SOUND
To turn the PIP sound on/off.
PIP SWAP
To switch the main-screen and sub-screen in PIP mode.
A34
screen.
brightness of the screen.
broadcasting
ENGLISH
Selecting and Adjusting the Screen
To
adjust the POP(Picture out Picture) of the screen
OSD
Adjust
Description
CH
CH
DSUB
To
adjust the
POP MODE submenu
function, Press the OK
button
on
-->
the remote control
After selecting ON in the POP ON/OFF menu, the following
POP SOURCE
To select
an
POP SIZE
To
the size of the POP
POP IMAGE
To
adjust
input signal
menu
items can be
adjusted.
for POP.
screen:
POP1/POP2/POP3/POP4
button to display
adjust the image of the POP screen; Press the
the submenu for POP IMAGE. The items of the sub-menu may vary
depending on the type of the source. In case the POP source is D-SUB or
DVI-D, PSM, COLOR and TINT MENU
CH
CH
are
not
supported.
CONTRAST
To adjust the contrast of the
BRIGHTNESS
To adjust the
This function is available
only
mode.
POP SOUND
To turn the POP sound on/off.
POP SWAP
To switch the main-screen and sub-screen in POP mode.
A35
screen.
brightness of the screen.
in NTSC
broadcasting
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
the power outlet.
Is the power indicator
Press the Power button.
light
Check and
see
if the power cord is connected
properly to
on?
When the power is on
with the power
indicator lighting blue,
does the
screen
Adjust the brightness and the contrast.
appear
dark?
(Display:blue,
station:blue)
Media
Is the power indicator
amber?
If the
display is in power saving mode, try moving the
pressing any key on the keyboard to bring up the
mouse or
(Display:amber,
Media station:blue)
screen.
Do you see an "OUT OF
RANGE" message on the
This message appears when the signal from the PC (video
card) is out of horizontal or vertical frequency range of the
screen?
display. See the 'Specifications' section of this
configure your display again.
*
Max Resolution
1280
Does the "OUT OF
RANGE" message appear
when you have set the
main
source as
HDTV?
manual and
x
1024 @60Hz
Check if the HDTV resolution of your set top box is set at
480i. If so, reconfigure it to 480p720p/1080i
Check if connection is being made via the D-SUB cable. If
HDTV is connected via D-SUB cable, the interface method
(60 Hz) are not supported. Use the HDTV port
and NTSC
(component)
Do you see a "CHECK
SIGNAL CABLE message on
the screen?
"
instead.
This message appears when the signal cable between
your PC and your display is not connected. Check the
signal cable and try again.
Press the SOURCE button
select and
input signal
A36
on
the remote control and
connected.
ENGLISH
Troubleshooting
Display image
Display
is incorrect
Position is
Display size
is not correct
in the PC mode.
On the
Press the AUTO button to automatically adjust your
the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon in
the on screen display.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed. If
yes, readjust the video card to the recommend
resolution.
display image to
incorrect.
screen
background, vertical bars
or stripes are visible.
If the resolution is 1280x768 @60Hz, 1024x768
@60Hz, 640x480 @70Hz or 848x480 @70Hz, select
the SELECT menu among SETUP OSD menu to set
the proper resolution.
If the resolution is 1280x768 @60Hz or
1024x768 @60Hz: Select one of
1280x768/1024x768/AUTO.
If the resolution is 640x480 @70Hz or 848x480
@70Hz: Select one of 640x480/848x480/AUTO.
Press the AUTO button to automatically adjust your
the ideal setting.
If the results are unsatisfactory, decrease the vertical
bars or stripes using the CLOCK icon in the on screen
display image to
display.
Any horizontal noise
appearing in any image
or
characters
are
not
clearly portrayed.
Press the AUTO button to automatically adjust your
the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on screen
display image to
display.
Check Control Panel --> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
The
screen
mono or
color is
abnormal.
Check if the signal cable is properly connected and
use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
slot.
Set the color setting higher than 24 bits (true color) at
Control Panel Settings.
-
The
screen
blinks.
Check if the screen is set to interlace mode and if yes,
it to the recommend resolution.
change
A37
Display image
is incorrect
Is the H/V
Check if the ZOOM value is set at '0'. In
position not
adjustable from the
ZOOM value is set at '0', the H/V
ZOOM function?
adjustable.
Has the
screen
size of
next your
changed
automatically?
regular settings.
Check if the TV sound is set at MONO. In
Is the sound not
displayed
position
the
will not be
If the IMAGE SIZE is not full-screen when you use
PC, execute POP and it will change back to
your PC
on
case
case
the
TV sound is at MONO, the sound will not be
the TV
displayed.
channel indication
window?
In the PC
the
signal source,
brightness of the
main
screen
Since the BRIGHTNESS and COLOR of
is
screen can
be
adjusted
a
sub-
in the PIP/POP IMAGE of the
PIP/POP menus, it may be different from the main
different
screen.
from that of the subscreen?
Have you installed the
display
driver?
Have you installed the
Be
display driver?
driver CD
sure
you
can
to install the
display driver from the display
(or diskette) that comes with your display. Or,
also download the driver from
our
web site:
http://www.lge.com.
Do you
Make
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found" message?
"IMAGE SIZE" function
"IMAGE SIZE" function
OSD
menu
on
does not work?
sure
to check if the video card
supports
Plug&Play function.
on
OSD
menu
does not work.
Check if POP function is in
use.
While POP is in use,
IMAGE SIZE function becomes disabled.
A38
ENGLISH
Troubleshooting
Audio function
No sound.
Check if the audio cable is
correctly connected.
Check the volume level.
Check if the sound
source
is
correctly selected.
No sound in PIP /POP
Check if the SOUND is ON in the PIP/POP OSD
mode.
menu.
Sound is too
or
too
high pitched
low piched.
Adjust the
Adjust the
TREBLE to
appropriate level.
appropriate level.
EFFECT to an appropriate level.
BASS to
Select the BBE
an
an
Sound level is too low.
Check the volume level.
Do you
"CONTROLS LOCKED" message
see a
Do you see "CONTROLS
LOCKED" when you push
MENU button?
You
on
the
screen.
the current control settings, so that
inadvertently changed. You can
OSD controls at any time by pushing the
can secure
they cannot
unlock the
be
MENU button and VOL.+ button for 5 seconds: the
message "CONTROLS UNLOCKED" will appear. It
is not possible to configure this function with the
remote control buttons. You
only
can
do
so
from the
monitor.
TV function
TV
signal
is not received.
Check the channel
the correct channel
system and make
system.
sure
Check the AUTO CHANNEL function to
you chose
automatically
search the available channels.
Check and
see
between your
Is the sound not
displayed
on
the TV
channel indication
if the TV
display
adapter
is
properly connected
and antenna cable.
Check if the TV sound is set at 'MONO'. In
case
TV SOUND is at 'MONO', the sound will not be
displayed.
window?
A39
the
"ZOOM" function
on
Do you see a "NOT
SUPPORTED" message
on
the screen?
OSD
menu
does not work.
Check the current resolution
is
higher than 1280x768,
supported.
A40
on your PC. If the resolution
the "Zoom" function will not be
ENGLISH
Specifications
(58.4cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
23 inches viewable
0.258mm pixel pitch
Display
23 inches
Sync Input
Horizontal
Video
Input
Freq.
Vertical Freq.
30
Input Form
Separate TTL, Positive/Negative
Composite TTL, Positive/Negative
SOG (Sync On Green)
Digital
15 pin D-Sub Connector
DVI D connector (Digital)
Composite video
56
Signal Input
-
-
66kHz
75Hz
(Automatic)
(Automatic)
-
S video
HDTV, TV
RGB
Input Form
Analog (0.7Vp-p/75ohm), Digital,
S-VIDEO, CVBS, Y Pb Pr (Y,Cb,Cr)
Resolution
Max
1280
x
1024 @60Hz
Recommend
1280
x
768 @60Hz
Plug&Play
DDC 2B
Power
Display
Input
Input
Input
DC
DC
AC
DC
Output
DV 5V
Media station
24V
5V
100-240V~50/60Hz 1.5A
24V
Power
Nomal
:
110w
Consumption
Stand-by/Suspend
≤
5W
Tilt
0˚~20˚
Range
Tilt Stand
4.0A
0.5A
4,0A
0.5A
DPMS Off
≤3W
≤ 3W
Power switch Off
Power cut-off switch off ≤ 1W
Attached( O ),
Detached
(
)
NOTE
Information in this document is
subject to change without
A41
notice.
Display (with tilt stand)
Dimensions
&Weight
Width
58.75cm / 23.13 inches
Height
Depth
44.65
Net
7.70Kg
cm
/ 17.58 inches
26.0cm / 10.24 inches
/ 16.98lbs
Media Station
Environmental
Conditions
Width
12.96
cm
/ 5.10 inches
Height
Depth
19.16
cm
/ 7.54 inches
20.56
cm
/ 8.09 inches
Net
2.7
Kg
/ 5.95lbs
Operating Conditions
Temperature
Humidity
Storage Conditions
Temperature
Humidity
VESA wall
For further
non-Condensing
-20˚C to 60 ˚C
5 % to 95 %
object (stand type
type. This monitor accepts
compliant mounting
Mounting
10 % to 80 %
non-Condensing
mounting
Connected to another
mounted
10˚C to 35 ˚C
interface
information, refer
a
and wall-
VESA-
pad.- optional)
to the VESA Wall
Instruction Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased
separately at most
Connected to
computer
A42
stores
ENGLISH
Display Modes (Resolution)
PC mode
123456789
VGA
640
x
350
31.469
70
VGA
640
x
480
31.469
60
VESA
640
x
480
37.500
75
VGA
720
x
400
31.468
70
VESA
800
x
600
37.879
60
VESA
800
x
600
46.875
75
MAC
832
x
624
49.725
75
60
VESA
1024
x
768
48.363
VESA
1024
x
768
60.123
75
10
VESA
1280
x
768
47.780
60
11
VESA
1280
x
1024
63.981
60
Signal
Connector Pin
Assignment
ENGLISH
DVI-D Connector
Pin
Pin
Signal
T. M. D. S. Data2-
Signal
16
Hot
T. M. D. S. Data2+
17
T. M. D. S. Data0-
123456789
T. M. D. S. Data2/4 Shield
18
T. M. D. S. Data0+
T. M. D. S. Data4-
19
T. M. D. S. Data0/5 Shield
T. M. D. S. Data4+
20
T. M. D. S. Data5-
DDC Clock
21
T. M. D. S. Data5+
22
T. M. D. S. Clock Shield
23
T. M. D. S. Clock+
24
T. M. D. S. Clock-
DDC Data
Analog
Vertical
Sync.
T. M. D. S. Data1-
10
T. M. D. S. Data1+
11
T. M. D. S. Data1/3 Shield
12
T. M. D. S. Data3-
13
T. M. D. S. Data3+
14
+5V Power
15
Ground (return for +5V,
H. Sync. and V. Sync.)
T. M. D. S.
(Transition
Minimized Differential
Signaling)
Indicator
LED Color
Display
Normal
Media station
blue
blue
Stand-by/Suspend
amber
dark blue
DPMS Off
amber
dark blue
Power switch off
off
dark blue
Power cut-off switch off
off
off
A44
Plug
Detect
Download PDF

advertising