LG | L4200TF | LG L4200TF Owner’s Manual

Table of Contents
Installation
and
Connection
Precautions
Safety
A1
Accessories
Using
A4
the Remote Control
A5
To arrange cables in order
Connecting
the
A12
Optional
-
A13
Speakers Optional
-
A14
Name and Function of the Parts
the Monitor
A15
Connecting
the Monitor
A15
Connecting
the VCR/DVD
A17
Connecting
the HDTV/DVD
A19
Connecting
to
Connecting
the TV
Connecting
Input
Selection
and
Tracking
Selecting
How to
and
dajust
DVI-D(HDCP)
VCR/DVD/Set-top
Box
A20
A21
Adjusting
the
from the
the Screen
OSD(On
Set/Selects the channel when
Screen
using
A22
Display)
the TV
Screen
A25
(Optional)
A26
Adjusting
Screen Color
A28
Adjusting
the audio function
A29
Adjusting
the timer function
A30
Selecting
the
A31
Adjusting
Screen CLOCK/PHASE and Position
Adjusting
PIP/POP/PBP Mode
Controlling
the
Options
Multiple
(Multiple Screen)
Monitors
A33
A34
Functions
A36
(RS-232C protocol)
A47
IR Codes
Miscellaneous
Troubleshooting
A49
Specifications
A52
is
a
trademark of SRS
technology
is
Labs,Inc.
incorporated
i
under license from SRS
Labs,Inc.
ENGLISH
Precautions
Safety
safety precautions carefully before using
Please read these
Warning
If you ignore the warning message, you may be
accident or death.
Caution
If you
seriously injured
or
the monitor.
there is
a
possibility
of
ignore the caution message, you may be slightly injured or the product may be damaged
Precautions in
installing
the Monitor
Warning
Keep away from
-
Electrical
heat
like electrical heaters.
shock, fire, malfunction
Keep the packing
-
sources
deformation may
or
anti-moisture material
occur.
vinyl packing out of the reach of children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the patient to vomit and visit the
nearest hospital. Additionally, vinyl packing can cause suffocation. Keep it out of the reach of children.
or
Do not
-
put heavy objects on the monitor or sit upon it.
monitor collapses or is dropped, you may be injured.
If the
Children must pay
particular attention.
Do not leave the power or signal cable unattended on the pathway.
The passerby can falter, which can cause electrical shock, fire, product breakdown
-
Install the monitor in
-
Dust
or
moisture
neat and
a
can cause
If you can smell smoke
service center.
-
If you continue to
use
or
injury.
dry place.
electrical
shock, fire
other odors
without
or
taking
or
hear
or
a
product damage.
strange
sound
unplug
proper measures, electrical shock
or
the power cord and contact the
fire
can occur.
If you dropped the monitor or the case is broken, turn off the monitor and unplug the power cord.
If you continue to use without taking proper measures, electrical shock or fire can occur. Contact the service
-
center.
Do not
drop metallic objects such as coins, hair pins, chopsticks or wire into the monitor, or inflammable
objects such as paper and matches. Children must pay particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the monitor, unplug the power cord and
-
contact the service center.
Caution
Make
sure
the monitor ventilation hole is not blocked. Install the monitor in
than 10cm from the
-
a
suitably wide place (more
wall)
If you install the monitor too close to the
wall, it may be deformed
or
fire
can
break out due to internal heat.
Do not block the ventilation hole of the monitor
-
The monitor
can
be deformed
Install the monitor
-
If the monitor is
on a
-
fire
can
flat and stable
dropped,
Install the monitor where
Keep the
or
by a tablecloth or curtain.
break out due to overheating inside the
you may be
no
EMI
place that has no risk of dropping the
injured or the monitor may be broken.
occurs.
monitor away from direct
The monitor can be damaged.
sunlight.
A1
monitor.
monitor.
Electrical Power Related Precautions
ENGLISH
Warning
Make
-
to connect the power cable to the
You may be electrocuted or injured.
sure
grounded
current.
Use the rated
-
The
voltage only.
monitor can be damaged,
During
-
a
thunder
or
or
you may be electrocuted.
lightning storm, unplug the power cable or signal
You may be electrocuted
or a
fire
can
cable.
break out.
Do not connect several extension
cords, electrical appliances or electrical heaters to
power bar with a grounding terminal designed for exclusive use with the computer.
A fire can break out due to overheating.
a
single
outlet. Use
-
Do not touch the power plug with wet hands.
the power plug completely or wipe dust off.
-
You may be electrocuted due to
excess
Additionally,
it the cord
pin
is wet
or
covered with
dust, dry
moisture.
If you don't intend to use the monitor for a long time, unplug the power cable from the monitor.
Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
-
Fix the power cable completely.
If the power cable is not fixed completely,
-
a
fire
can
break out.
Hold the
plug when pulling out the power cable. Do not bend the power cord
heavy objects on the power cord.
The power line can be damaged, which may cause electric shock or fire.
with excessive force
or
put
-
Do not insert
a
conductor
(like
connected to the
chopstick) into one end of the power cable while the other end
on the wall. Additionally, do not touch the power cable right after
a
metal
input terminal
plugging into the wall input terminal.
-
You may be electrocuted.
Caution
Do not
-
unplug the power cord while the monitor
Electrical shock can damage the monitor.
Precautions in
Moving
is in
use.
the Monitor
Warning
Make
-
to turn off the monitor.
You may be electrocuted
Make
-
sure
sure
to
remove
or
the monitor
can
be
damaged.
all cables before
You may be electrocuted
or
the
moving the monitor.
monitor can be damaged.
A2
is
a
Precautions
Safety
Caution
Do not shock the monitor when
-
You may be electrocuted
Do not
or
it.
moving
the monitor
dispose the product-packing
can
be
damaged
box. Use it when you
move.
Make the
-
panel face forward and hold it with both hands to move.
If you drop the monitor, the damaged monitor can cause electric shock or fire.
repair.
Precautions in
Using
Contact with the service center for
the Monitor
Warning
Do not
-
-
Fire
disassemble, repair or modify the
or
electric shock accident
Contact the service center for
monitor at your
discretion.
own
can occur.
check, calibration
Do not spray water on the monitor
electric shock accident can occur
or
or
scrub with
repair.
an
inflammable substance
(thinner or benzene).
Fire
or
Keep the
-
monitor away from water.
Fire or electric shock accident can occur.
Caution
Do not
-
put
There is
a
or
store inflammable substances
danger of explosion or fire
near
due careless
the monitor.
handling of the
When
cleaning the brown tube surface, unplug the power cord
scratching. Do not clean with a wet cloth.
-
The water
Take
a
can
sink into the
monitor, which
rest from time to time to
Keep the
can cause
comfortable and natural
Take
a
regular break when working with
Do not press
scratch on it.
position
when
a
strongly upon the panel with
-
resolution and clock
appropriate
Your vision
can
Use authorized
be
working with
monitor for
a
Keep proper distance from the monitor.
Your vision may be impaired if you look at the
-
electric shock
or
prevent
serious malfunction.
monitor clean at all times.
a
-
and scrub with soft cloth to
protect your vision.
Take
Set the
inflammable substances.
hand
or
a
a
monitor to relax the muscles.
long time.
sharp object such
monitor too
as
nail, pencil
or
pen,
by referring to the
User's Manual.
impaired.
detergent only when cleaning the
monitor.
(Do
not
use
benzene,
thinner
or
alcohol.)
Disposal
The fluorescent
make
closely.
Monitor can be deformed.
On
or
product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of your local authority.
lamp
used in this
A3
a
Accessories
Please check the accessories in the
*
The monitor and the accessories
Desktop
Stand
product package.
be different from the
can
Free Mount
Type
figures
shown here.
ENGLISH
Type
OR
ON /OFF
Monitor
Remote Control/
Batteries
User's Guide/
15-pin
Driver CD/Cards
D-Sub
DVI-D
Signal
Signal
Cable
Cable
Audio Cable
Power Cord
RCA-PC
(PC)
Audio Cable
Speaker
Optional
kit / Screws
(Applicable only
that
Wall-mount Rack
Please refer to the enclosed "Installation Guide" when
installing the wall-mount rack.
Inserting
batteries into remote control.
1. Take out the
battery cap.
2. Insert the
battery
3. Close the
battery cap.
?
You
can use a
and 30
with correct
polarity (+/-).
remote controller 7 meter distance
degree (left/right)
within the
receiving
scope.
?
Dispose
of used batteries in the
recycle
prevent environmental pollution.
A4
bin to
unit
for models
support the speakers)
the
Remote
Control
Using
Name of the Remote Controller Buttons
Remote Control
MUTE
POWER
MENU
Use this button to enter the On Screen
Display menu.
EXIT
Use this button to exit the On Screen
*/SSM
(Sound
Status
Display
menu.
Memory)
Use this button to select the sound tone.
Press
repeatedly to select FLAT, MUSIC, MOVIE,
SPEECH, USER sound tone.
A5
Name of the Remote Controller Buttons
Remote Control
SOURCE
ENGLISH
If you press the button once,
the following Input Signal
Window will appear. Select the
signal type you want using the
button.
TV/AV
TV/AV button
:
TV
I/II
:
AV1
>
>
AV2
Bilingual choice
(TV only)
S-Video
>
>
Component
and sound mode selection
Press this button
to switch from Stereo to Mono sound in
case
of
transmission, or from Nicam Stereo to
Nicam Mono, in case of digital transmission.
stereo
to switch from Nicam Dual I to Nicam Dual II
Nicam Dual I+II in
or
of Nicam Dual
case
transmission.
to choose between Dual
case
of
bilingual
transmission
Dual I sends the
the
I, Dual II
loudspeakers
primary
or
Dual I+II in
:
broadcast
language
to
;
Dual II sends the
secondary broadcast
language to the loudspeakers ;
Dual I+II sends a separate language to
loudspeakers.
each
Sound
output selection (AV, RGB, DVI only)
In AV, RGB, DVI mode, you can select output
sound for the left and
Repeatedly
sound
L+R
right loudspeakers.
press the I/II button to select the
output.
:
Audio
signal
from audio L
input
is
sent to the left loud
speaker and
audio signal from audio R input is
sent to the right loud speaker.
L+L : Audio signal from audio L input is
sent to left and right loud-peakers.
R+R : Audio signal from audio R input
is sent to left and right loud-speakers.
NOTE
:
In
case
of weak stereo sound
Nicam stereo transmission, select
A6
signals, with
mono reception.
stereo
or
the
Remote
Control
Using
Remote Control
PR
(
VOL
)
Buttons
(
)
Buttons
OK Button
Number buttons
AUTO Button
?This function is to
automatically search the
available channels. It is available to the TV
signal
inputs only.
?This function is to
automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode). It is
available to the PC analog signal input only.
SWAP function
To switch the main-screen and sub-screen in
PIP/POP/PBP mode.
A7
ENGLISH
SLEEP
You
SLEEP Timer
:
period after which the
TV / AV1 / AV2 / S-Video / Component should switch
itself to standby. Press the key repeatedly to select the
can
set
a
time
number of minutes.
LIST
To
Programme list
display the programme
:
list
(0~99).
Note: TV channels
to be
setup
displayed in blue have been
skipped in the Programme Edit
menu
Q.VIEW
:
QUICK VIEW Button
*
Favourite
Program
On
:
*
Favourite
Program
Off
:
(See
page
A27)
Rotate Favourite channel.
To
display the previously
selected TV channel.
APC / PSM
Press
repeatedly to select Dynamic, Standard, Mild,
Game or User picture mode. This function is not
supported in PC mode.
A8
the
Remote
Control
Using
Remote Control
-
PIP/POP/PBP function
1.
PIP
in
Picture)
The sub-screen is
changed
(Picture
SMALL
:
2.
POP
MEDIUM
->
(Picture
The sub-screen
out
->
in the order shown below.
LARGE
OFF
Button
Picture)
moves
->
to the next mode whenever you press
this button.
:
POP ON
->
PBP(FULL)
PBP(4:3)
PBP
POP ON
3.
->
->
OFF
(FULL)
PBP
(4:3)
SWAP Button
You
swap the main screen and the sub-screen when the
PIP/POP/PBP function is used.
can
PIP
SWAP
POP
SWAP
PBP
<Table of PIP/POP/PBP Function Support>
TV
AV1
AV2
S-Video
When
COMPONENT
RGB PC
TV
AV1
AV2
S-Video
COMPONENT
DVI PC
'Input Signal 1' comes on in the main
screen, only 'Input Signal 2' can be
displayed on the sub-screen. On the
contrary, if the main screen displays 'Input
Signal 2', the sub-screen can display 'Input
Signal 1' only. You can swap 'Input Signal
1' and 'Input Signal 2' using the SWAP
RGB PC
button.
DVI PC
*PIP function is not
and 1080i modes.
A9
supported
in
480i, 576i
Remote Control
-
Using
the Teletext function
TEXT
To select the teletext
off. The main index
the last selected page appears on the
together with an information headline and
or
page
screen
an
on or
option
line at the bottom of the
screen.
UPDATE
Press the button to appear the TV programme. At
the top of screen indicates that you are still in the
teletext mode. Before
interrupting teletext,
you
may select a page number. When the page has
been found, the information line appears briefly
on
your
screen.
Press the button
again to
reappear teletext.
SIZE
Press the button
repeatedly to display the
upper
part, the lower part and then to return to the
normal page size.
HOLD
Press the button to
of the
subpages.
stop the automatically rotating
Press the button
continue the automatic
again to
rotating again.
INDEX
To
display the
A10
main index.
ENGLISH
the
Remote
Control
Using
Remote Control
-
Using the Teletext function
MODE
The mode will be switched in the Teletext
mode.
TIME
press this button to select a sub page number.
The sub page number is displayed at the
bottom of the
screen.
To hold
or
change
the
sub page, press the RED/GREEN,
or
NUMBER buttons. Press again to exit this
function.
MIX
Display the teletext pages superimposed on
the TV picture. To switch the TV picture off
press this button again.
REVEAL
Press the button to reveal/conceal the hidden
information, such
puzzles.
as
Press this button
information from the
A11
solutions to riddles and
again
display.
to
remove
the
To arrange cables in order
*
1.
Disassemble the stand
down
on
the base
as
cover.
shown in the
Stand
cover
may be
Optional
for models that
easily
support the stand
disassembled
by pressing
figure.
cover
2. After connecting the cables,
stand. If
The
Applicable only
-
securely connected,
correctly position
the stand
cover
you will hear the latch click into
A12
into the holes
place.
on
the
ENGLISH
the
Connecting
Speakers Optional
-
*
Use the
screws
in the below
to
secure
the
Applicable only
speakers
on
the
rear
for models that
support the speakers
side of the monitor
as
shown
figure.
When the
A13
speaker
is installed.
Name and Function of the Parts
Rear View
Back
-
Power Connector
:
Cap
Open the
back cap before
you install the monitor.
Connect the power cord
Wired Remote Control Port
RS-232C Serial Ports
PC
Signal Inputs
PC Sound Jack
: Connect the audio cable to the *LINE OUT
AV
Input
jack of the
PC sound card.
Ports
TV Tuner Jack
:
Connect the antenna.
*LINE OUT
A terminal used to connect to the
speaker including
a
the
built-in
amplifier (Amp). Make sure that
before connecting. If the Audio Out of
connecting terminal of the PC sound card is checked
PC sound card has only Speaker Out, reduce the PC volume.
If the Audio Out of the PC sound card
supports both Speaker Out and Line Out,
using the card jumper of the
(Refer to the
program
Sound Card
A14
Manual).
convert to Line Out
ENGLISH
the
Monitor
Connecting
First of
Then,
all,
see
if the
connect the
computer, monitor and the peripherals
signal input
are
turned off.
cable.
A
When
connecting with
the DVI
signal input cable.
B
When
connecting with
the DSub
signal input cable. (IBM compatible PC)
C
When
connecting with
the DSub
signal input cable. (Macintosh)
Rear side of the monitor.
A
PC
PC
B
C
MAC
Macintosh
Adapter (not included)
Use the standard Macintosh
adaptor
is available in the market.
Connect the power cord.
Rear side of the monitor.
*
When
adapter since an incompatible
connecting to a
wall outlet.
A15
(Different signaling system)
A
Turn
on
power
by pressing
the power button
on
the monitor.
ENGLISH
Power button
B Turn
Select
an
the PC.
on
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
connecting with
a
the remote controller to select the
input signal.
at the front side of the monitor.
DVI-D
Select DVI PC: DVI-D
signal input cable.
digital signal.
When
?
connecting with a D-Sub signal input cable.
Select RGB PC: 15-pin D-Sub analog signal.
・ How to connect to two
Note
Connect the
computers.
signal cables (DVI and D-Sub)
Press the SOURCE button in
・
a
to each
computer.
remote controller to select the
Directly connect to a grounded power outlet on the wall
wire.
A16
computer to
or a
use.
power bar with
a
ground
the
VCR/DVD
Connecting
Connect the video cable
cord
A
(See
page
as
shown in the below
figure
and then connect the power
A15).
When
?
connecting with a RCA cable.
Connect the input terminal with a proper color match.
(Video Yellow, Sound (left) White, Sound (right)
--
--
--
Red)
Monitor
Yel ow White
Red
RCA Cable
(not included)
Y
W
R
VCR/DVD
B
When
?
connecting
with
Connect to the S-Video
a
S-Video cable.
input
terminal to watch
high image quality
Monitor
Yel ow White
Red
RCA Cable
(not included)
S-Video Cable
(not included)
Y
W
R
VCR/DVD
A17
movies.
When
C
connecting
with
a
SCART cable.
ENGLISH
Monitor
RCA to SCART Cable
Please,
use
(Optional)
shielded scart cable.
VCR/DVD
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
A
When
?
B
C
RCA cable.
connecting with
an
S-Video cable.
Select S-Video.
When
?
an
at the front side of the monitor.
Select AV2.
When
?
connecting with
the remote controller to select the
connecting with
a
SCART cable.
Select AV1.
A18
input signal.
the
HDTV/DVD
Connecting
Connect the video/audio cable
power cord
?
(See
Connect the
page
as
shown in the below
figure
and
then,
connect the
A15).
input terminal
with
a
proper color match.
Monitor
Gre n
Blue
Red
White
Red
(Compnetabl noticlude)
Gre n
Blue
AudioCable (noticlude)
Red
White
Red
HDTV /DVD
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
Select
the remote controller to select the
at the front side of the monitor.
Component.
A19
input signal.
to
Connecting
DVI-D(HDCP) from the VCR/DVD/Set-top Box
Connect the video/audio cable
power cord
(See
page
as
shown in the below
figure
and then connect the
A15).
ENGLISH
OUT
REMOTE
CONTROL
IN
Monitor
DVI-D
Signal
RCA-PC
Cable
Audio Cable
VCR/DVD/Set-top Box
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote controller to select the
at the front side of the monitor.
Select DVI PC.
A20
input signal.
TV
the
Connecting
See if the antenna cable is connected at the
then,
connect the power cord
(see
page
rear
side of the monitor and
A15).
Rear Side of the Monitor
Antenna Cable
(optional)
Select
an
input signal.
Press the SOURCE button
on
Or, press the SOURCE button
?
the remote controller to select the
at the front side of the monitor.
Select TV.
A21
input signal.
and
Selecting
the
Screen
Adjusting
Name of the Buttons in the Screen
Adjustment
Unit
Power Button
ENGLISH
?
Press this button to turn
Press this button
This Indicator
?
Use this button to show/hide the OSD
MENU Button
lights up green when the display operates normally(on
mode). If the display is in sleep (Energy Saving) mode, this indicator
color changes to amber.
(On
Screen
Display)
menu
screen.
?
Adjust
to turn it off.
?
Power Indicator
OSD Select /
again
the power.
on
Use this button to select
an
icon
or
adjust the setting
Button
?
Use this button to
directly
brightness and contrast
(RGBPC/DVIPC).
?
Adjust the volume.
A22
control
of the PC
signal
in the OSD
screen.
and
Selecting
the
Screen
Adjusting
Name of the Buttons in the Screen
[For
AUTO/SELECT Button
PC
Adjustment
Unit
Analog signal]
[Other signals]
?
The current
signal
and mode information will be
SOURCE Button
?
Select the
input signal
TV
AV1
SCART
AV2
S-Video
Composite Video
Separate Video
Component
HDTV/DVD
RGB PC
15-pin D-Sub analog signal
DVI digital signal
DVI PC
?
Television
The unit that receives the
signal
from the remote control.
A23
displayed.
OSD Menu
Icon
Function
ENGLISH
Description
Set/Selects the channel.
when
(available only
watching TV)
STATION
Adjusts
screen
brightness,
contrast and color that you
prefer.
PICTURE
Adjusts
the audio function.
Adjusts
the timer function.
Adjusts
the
screen
status
Adjusts
the
screen
video.
Adjusts
PIP/POP/PBP mode function.
SOUND
TIMER
according
to the circumstances.
SPECIAL
SCREEN
PIP/POP/PBP
Note
OSD(On
Screen
Display)
The OSD function enables you to
adjust
graphical presentation.
A24
the
screen
status
conveniently
since it
provides
and
Selecting
How to
the
Screen
Adjusting
adjust the OSD (On Screen Display)
PR
OK
the
up
a
Move where
icon
you want to
Select
you want to
menu
adjust
screen
Select
menu
Press the MENU
Button, then the main
menu
To
3
When the icon you want becomes
highlighted,
4
Use the
adjust the
5
Accept
6
Exit the OSD
access a
How to
icon
Adjust the status
Use the remote controller to
2
control,
use
the
changes by pressing
by pressing
of the OSD appears.
Buttons.
Buttons to
the
a
press the OK Button.
item to the desired level.
the OK Button.
the EXIT Button.
adjust the
screen
automatically
You need to
adjust the screen display when connecting the
new computer or changing the mode. Refer to the following
set an optimal monitor screen.
monitor to
(AUTO button in a remote controller)
analog signal. Then, an optimal screen status will be selected
that fits into the current mode.
If
a
section to
Press the AUTO/SELECT button
in the PC
Save
Exit from the
adjustment
menu screen.
adjust
?
1
OK
PR
PR
Move where
menu
OK
OK
OK
PR
Pops
PR
PR
OK
screen
adjustment is not satisfactory, you
clock and phase in the OSD menu.
need to
adjust
screen
A25
position,
adjust the
OSD
screen.
Set/Selects the channel when
using the TV (Optional)
ENGLISH
Auto programme
System
Press the
buttons to select the TV
system of the country
the world from where you want to receive the TV channels.
If you want to receive 'SECAM L' channel, change the SYSTEM
Storage
from
'L' before
launching
To select
a
an
to
programe number or enter the programe number with the
number buttons from where you want to start searching for new channels.
If you want to keep the channels 1 to 10 stored earlier, enter programe
new
channels from number 11 onwards.
Press OK button to start automatic
programming. all available TV
channels are searched for and stored automatically. To stop auto
programming, press the MENU or EXIT button. When auto programming
is completed, the programme list menu appears.
Manual programme
To
System
menu
automatic search.
number 11. Your TV search for
Start
part of
or
Press the
change
buttons to select the TV
the channel.
system of the country
or
part of
the world from where you want to receive the TV channels.
Storage
Channel
Press the
buttons to select the channel number
or
enter the
programe number with the number buttons in where you want to store
channel.
Press the
buttons to select C-CH for aerial channels
cable channels. If you know the C-(01~69)or S-channel
enter it drectly with the digit buttons 0 to 9.
To select the channel
A26
reception type.
:
V/UHF / CABLE
or
S-CH for
number(01~47),
and
Selecting
the
Screen
Adjusting
Set/Selects the channel when
Name
To
using the TV (Optional)
It is
assigned channel name.
possible to change the name stored
to
a
TV channel which has not
or
numbers
see
the
can
be
Press the
given
yet
in the memory or to assign a name
been entered. A name with up 5 letters
to the programme numbers 0 to 99.
changed. -> Press the
buttons to select a character.(space, number 0~9,and alphabet A~Z) ->
Press the AUTO/SELECT button (or OK button on the remote control).
Fine tune In
buttons to
move cursor
to be
of poor reception, you can improve the reception by fine tuning.
Use the
buttons to fine tune for the best picture and sound.
Search
case
Use the
direction.
buttons to search next channel backward
or
foreward
Programme edit
To
adjust the
Delete
Edit submenu function, Press the OK
Press the
->
button
-->
buttons to select
Press the red
key
channel number is
on
a
the remote control
on
TV channel to be deleted.
the remote control
->
The selected TV
deleted, all the following channels
are
shifted up
one
position.
Copy
Press the
buttons to select
a
TV channel to be
Press the green key on the remote control. All the
numbers are shifted down one position.
Move
Press the
Press the
buttons to
Press the
Skip
buttons to select
yellow key
move
the remote control.
yellow key again
->
key
on
->
Press the
->
to release this function.
buttons to select
Press the blue
channel number to be moved.
the TV channel to the desired channel number.
Press the
displayed
on
a
copyed. ->
following channel
a
channel number to be
the remote control. The
skipped
skipped.
->
TV channel is
in blue.
Favourite
This function lets you select your favourite
programme
programmes
Press the
a
directly. (8 channel)
buttons to select
channel number.
*
Q.VIEW
button(remote control)
Rotate Favourite channel
A27
:
Adjusting Screen Color
PSM
TV/ AV1/ AV2/ S-Video/
Component
input only
The PSM function
automatically adjusts
the
screen
image quality
depending on the AV/TV usage environment.
Dynamic : Select this option to display with a sharp image.
Standard : The most general and natural screen display status.
Mild : Select this option to display with a mild image.
Game : Select this option to enjoy dynamic image when playing
User : Select this option to use the user-defined settings.
?
?
?
?
a
game.
?
Contrast
To adjust the contrast of the
Brightness
To adjust the brightness
screen.
of the
screen.
Color
To adjust the color to desired level.
Sharpness
To adjust the
cleaness of the
screen.
Tint
To adjust the tint to desired level.
This function is available
only
in NTSC
broadcasting
mode.
ACC
factory setting color set.
Warm : Slightly reddish white.
Normal : Slightly bluish white.
Cool : Slightly purplish white.
Selecting
?
?
?
Note
a
If the PSM
the
setting in the PICTURE menu is set to Dynamic, Standard,
subsequent menus will be automatically set.
A28
Mild
or
Game
ENGLISH
and
Selecting
the
Screen
Adjusting
Adjusting Screen Color
CSM
RGB PC / DVI PC
?
?
input only
6500K/9300K
Selecting a factory setting color set.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
User : Select this option to use
the user-defined settings.
Contrast
To adjust the contrast of the
Brightness
To adjust the brightness
screen.
of the
screen.
Red / Green / Blue
Set your own color levels.
Adjusting
the audio function
SSM
The best sound tone quality will be selected
automatically
depending on the video type that you're currently watching.
?
Flat
The most
?
commanding
and natural audio.
Music
Select this
to
enjoy the original
option
to
enjoy
option
to watch
option
to
option
sound when
listening
to the music.
?
Movie
Select this
?
Speech
Select this
?
Balance
Use this function to balance sound from the left and
AVL
To
SRS WOW
sound volumes
To
Set the SRS WOW
use
setting
Note
can
use
the user-defined audio
settings.
right speakers.
all channels
or
signals automatically to the
most
feature, select ON.
menu on.
The SRS WOW function
effects. It will
this
across
sports broadcasting.
User
Select this
adjust uneven
appropriate level.
sublime sound.
plays
back the
provide rich and profound
not be adjusted.
mono or
stereo sound
input with
the
dynamic
sound tone. If you set the SRS WOW on,
When connected to your computer and the 'SSM' setting in the audio menu is
Movie or Speech, the available menus are Balance, AVL and SRS WOW
.
A29
one
surround
user
of
audio
Flat, Music,
Adjusting
the timer function
ENGLISH
Clock
If the time is
1)
2)
3)
4)
5)
Off / On Timer
on
the clock is
incorrect,
Press the MENU button and then
reset the clock
button and then
use
button to select the Clock
Press the
button and then
use
button to set the
Press the
button and then
use
Press the
button and then
use
Setting
is
turn-on.
Setting
is
menu.
menu.
hour(01~12).
button to set the minutes(00~59).
button to set the morning(AM) or afternoon(PM).
available, however, operation is only allowed upon TV input
automatically
switches the set to
1) Press the MENU button and then use
button and then use
2) Press the
button and then use
3) Press the
button and then use
4) Press the
button and then use
5) Press the
button and then use
6) Press the
7) Only On Timer function; Press the
Then, press the
standby
at the
pre-set time.
button to select the TIMER
button to select Off Timer
button to set the
button to set the
button to set the
or
button and then
use
or
menu.
On Timer.
hour(01~12).
minutes(00~59).
morning(AM) or afternoon(PM).
button to select On
button and then
Off.
button to set the channel at
button to set the turn-on sound level.
available, however, operation is only allowed upon TV input
If Auto Off is active and there is
no
input signal,
automatically after 10 minutes.
1) Press the MENU button and then use
button and then use
2) Press the
Note
button to select the TIMER
use
Press the
The off timer
Auto Off
manually.
・ In the event of power
the TV swithchs to
Stanby
button to select the Auto Off
button to select On
or
mode
menu.
Off.
interruption (disconnection or power failure), the clock must be reset.
・ Two hours after the set is switched on by the on time function it will automatically switch
back to standby mode unless a button has been pressed.
・ Once the on or off time is set, these functions operate daily at the preset time.
・ Off Timer function overrides On Timer function if they are set to the same time.
・ The set must be in standby mode for the On timer to work.
A30
and
Selecting
the
Selecting
the
Screen
Adjusting
options
Input
If you press the button once, the following
Input Signal Window will appear. Select
the
signal type
you want
using
the
button.
Child Lock
Use the
buttons to select On
or
with the remote control. This feature
In order to lock the OSD
In order to unlock
1)
Off. The Set
can
prevent
Push the MENU button
on
can
only
set the Child Lock tab to the 'On'
adjustment,
following :
screen
it, do the
be set up so that it
unauthorized viewing.
can
the remote control and set Child Lock to the 'Off'
Language
To choose the
Power
Use this function to set the power indicator on the front side of the monitor to On
If you set Off, it will go off. If you set On at any time, the power indicator will
Indicator
automatically
Transparency
To
language
be turned
in which the control
names are
be used
position.
position.
displayed.
or
Off.
on.
adjust the transparency
of the OSD
menu screen.
Use this function to
Zoom
zoom
in the
screen.
When you turn the monitor off and on again,
the default screen size will be restored.
Press the
button to
display the
submenu for Zoom.
Reset
Use this function to reset the monitor to the
*
zooming value is set to '0', vertical and
horizontal positioning cannot be adjusted.
*
The variable range can differ
type of the input signal.
If the
factory
default.
according
to the
However, language selection
will not be initialized.
Note
the Zoom
menu
will be disabled if the
screen
A31
size is not Full
or
PIP/POP/PBP is in
use.
Selecting
the
options
ENGLISH
Set ID
Logo Display
Lamp
You
assign a unique Set ID NO (name
assignment) to each monitor when several
monitors are connected for display. Specify the
number (0~99)using the
button and exit.
Use the assigned Set ID to individually control
each monitor using the Monitor Control Program.
Use this function to set the
or
Off. If you set
On, the
can
Logo Dispaly Lamp on the front side
lamp will automatically be turned on.
A32
of the monitor to On
and
Selecting
the
Screen
Adjusting
Adjusting Screen CLOCK/PHASE
ARC
To select the
image
size of the
screen.
<TV / AV1 / AV2 / S-Video / Component
*
When the
and Position
input only>
component input signal
is
720p
or
<RGB PC / DVI PC
input only>
1080i, the spectacle function is
not
supported.
Auto-
This button is for the automatic
configure
This function is suitable
Clock
To minimize any vertical bars or stripes visible on the screen background. The horizontal
screen size will also change. This function is suitable for analoge singnal input only(RGB
PC
Phase
To
adjustment of the screen position, clock and phase.
for analoge singnal input only(RGB PC input only).
input only).
display. This item allows you to remove any
and clear or sharpen the image of characters. This function is suitable
singnal input only(RGB PC input only).
adjust
the focus of the
horizontal noise
for
analoge
To
adjust position of the screen
(RGB PC input only).
Press the
button to display the
position.
Position
Left
Right
Up
Down
A33
submenu for
Moving the screen position horizontally.
Moving the screen position vertically.
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
ENGLISH
On/Off
PIP
After
the
selecting PIP in the
following menu items
PIP On/Off menu,
can be adjusted.
POP
After
the
selecting POP in the POP On/Off menu,
following menu items can be adjusted.
PBP
After
the
Source
To select
Size
To
adjust the size
Image
To
adjust
an
the
input signal
selecting PBP in the PBP On/Off menu,
following menu items can be adjusted.
for PIP/POP/PBP.
of the PIP/POP/PBP
screen.
(PIP : Small, Medium, Large
of the PIP/POP/PBP screen; Press the
submenu for PIP/POP/PBP image. Use the
buttons to
button to
image
level. The items of the sub-menu may vary
depending
on
the
/ PBP
adjust
:
display
Full, 4:3)
the
the item to the desired
type of the
source.
Contrast
Adjust
PIP/POP/PBP
Brightness
Adjust PIP/POP/PBP
screen
contrast.
screen
brightness.
Color
Adjust
the PIP/POP/PBP
screen
color.
Tint
To
adjust the
tint to desired level.
This function is available
*
The sub-menu
signal.
Sound
To turn the PIP/POP/PBP sound on/off.
A34
can
only
differ
in NTSC
according
broadcasting
to the
type
mode.
of the
input
and
Selecting
the
Screen
Adjusting
Adjusting PIP/POP/PBP Mode (Multiple Screen) Functions
Position
To
Swap
adjust
the
position
to PIP
screen.
To switch the main-screen and subscreen
PIP
SWAP
POP
SWAP
PBP
A35
in PIP/POP/PBP mode.
the
Controlling
Multiple
Monitors
Use this method to connect several monitors to
You
can
control several monitors at
time
a
to
a
single
PC.
the cable
Connecting
Connect the RS-232C cable
*
a
single PC.
by connecting them
(RS-232C protocol)
The RS-232C
protocol
turn the monitor
as
shown in the
picture.
is used for communication between the PC and monitor. You
on/off, select
an
input
source or
adjust
the OSD
menu
from your PC.
OUT
RS-232C Cable
(not included)
PC
OUT
OUT
IN
IN
Monitor
Communication Parameter
▶ Baud Rate
:
9600bps (UART)
▶ Data
Length : 8bits
▶ Parity Bit : None
▶ Stop Bit : 1bit
▶ Flow Control
:
None
▶ Communication Code : ASCII code
A36
OUT
IN
can
ENGLISH
the
Controlling
Multiple
Monitors
(RS-232C protocol)
Command Reference List
COMMAND 1
01. Power
COMMAND 2
DATA
k
a
00H
k
b
00H
Ratio
k
c
01H
04. Screen Mute
k
d
00H
05. Volume Mute
k
e
00H
06. Volume Control
k
f
00H
07. Contrast
k
08.
k
g
h
00H
09. Color
k
i
00H
10. Tint
k
j
00H
11.
k
k
00H
12. OSD Select
k
l
00H
13. Remote Lock On/Off
k
m
00H
14. PIP/PBP/POP On/Off
k
n
00H
15. PIP Position
k
q
00H
16. Balance
k
t
00H
17. ACC
18. PIP/PBP/POP SOURCE
k
k
u
y
00H
00H
19. Auto
j
u
01H
20. Tune Command
m
a
01H
21.
m
c
Key
02.
03.
Select
Input
Aspect
Brightness
Sharpness
Configure
Key
Transmission /
Receiving
00H
Protocol
Transmission
[Command1][Command2][ ][Set ID][ ][Data][Cr]
*
*
*
[Command 1]: First command. (j or k)
[Command 2]: Second command.
[Set ID]: You can adjust the set ID to choose desired monitor
ID number in Special menu. Adjustment range is 0
When selecting Set ID '0', every connected
99.
~
TV set is controlled. Set ID is indicated
as
decimal
(0~99)on menu and as Hexa decimal (0x0~0x64)
on transmission/receiving protocol.
*
[DATA]:
To transmit command data.
Transmit 'FF' data to read status of command.
*
[Cr]: Carriage
Return
ASCII code '0x0D'
*
[
]:
ASCII code
Space (0x20)'
A37
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
(Hexa)
01H
08H
06H
01H
01H
64H
64H
64H
64H
64H
64H
01H
01H
03H
03H
64H
03H
08H
7DH
Code
Transmission /
Receiving
Protocol
OK Acknowledgement
[Command2][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
normal data. At this
receiving
based
on
time, if the
data is data read
mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
*
The Monitor transmits ACK
this format when
functions
Data 1:
or
3: Wait
communication
01. Power
more
based
on
abnormal data from non-viable
receiving
Illegal Code
Not supported
2:
(acknowledgement)
errors.
function
time
On(Command
:
a)
▶ To control Power On/Off of the Set.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data0:PowerOff
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
▶ To show the status of Power On/Off.
Transmission
[k][a][ ][Set ID][ ][FF][Cr]
Data 0
:
Power Off
1:PowerOn
Acknowledgement
[a][ ][Set ID][ ][OK][Data][x]
*
The Monitor transmits ACK
(acknowledgement)
this format when
normal data. At this
receiving
data is data read
based
on
time, if the
mode, it indicates present status data. If
the data is data write mode, it returns the data of the PC
computer.
A38
ENGLISH
the
Controlling
Transmission /
Multiple
Receiving
Monitors
Protocol
Input Select(Command : b) (Main Picture Input)
▶ To select input source for the Set.
You can also select an input source using the SOURCE
02.
button
on
the remote control.
Transmission
[k][b][ ][Set ID][ ][Data][Cr]
Data 0:TV
2:AV1
3
:
S-Video
4
:
Component
5:AV2
6:RGBPC
8:DVIPC
Acknowledgement
[b][ ][Set ID][ ][OK][Data][x]
03.
Aspect Ratio(Command : c) (Main picture format)
▶ To adjust the screen format.
You can also adjust the screen format using the ARC
(Aspect Ratio Control) button on remote control or in the
Screen
menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data1:4:3
2:Full
3
:
Spectacle
4
:
Zoom1
5
:
Zoom2
6
:
1:1(PC)
Acknowledgement
[c][ ][Set ID][ ][OK][Data][x]
A39
(RS-232C protocol)
Transmission /
04. Screen
Mute(Command
▶ To select
screen
Protocol
Receiving
:
ENGLISH
d)
mute on/off.
Transmission
[k][d][ ][Set ID][ ][Data][Cr]
Data 0
:
Screen mute off
1
:
Screen mute
on
(Picture on)
(Picture off)
Acknowledgement
[d][ ][Set ID][ ][OK][Data][x]
05. Volume
Mute(Command
:
e)
▶ To control On/Off of the Volume Mute.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data 0
:
Volume Mute On
1
:
Volume Mute Off
(Volume Off)
(Volume On)
Acknowledgement
[e][ ][Set ID][ ][OK][Data][x]
Data 0
:
Volume Mute On
1
:
Volume Mute Off
(Volume Off)
(Volume On)
06. Volume
Control(Command
▶ To
Volume
adjust
:
f)
.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[f][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A40
the
Controlling
Transmission /
Multiple
Receiving
Monitors
Protocol
07.
Contrast(Command : g)
▶ To adjust screen contrast.
You can also adjust the contrast
in the Picture
menu.
Transmission
[k][g][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
・Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[g][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step0
.
.
.
A:Step10
.
.
.
F:Step15
10:Step16
.
.
.
64
:
Step
100
08.
Brightness(Command : h)
▶ To adjust screen brightness.
You can also adjust the brightness
in the Picture
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
・Refer to 'Real data
mapping'
as
shown below.
Acknowledgement
[h][ ][Set ID][ ][OK][Data][x]
*
Real data
mapping
0:Step
.
.
.
A:Step10
.
.
.
F:Step15
10:Step16
.
.
.
64
:
Step
100
A41
menu.
(RS-232C protocol)
Transmission /
Receiving
Protocol
Color(Command : i) (TV, AV only)
▶To adjust the screen color.
You can also adjust the color in the Picture
09.
menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[i][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
Tint(Command : j) (TV, AV-NTSC only)
▶To adjust the screen tint.
You can also adjust the tint in the Picture menu.
10.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
Data
Red: 00H
Green: 64H
~
(Hexadecimal code)
Acknowledgement
[j][ ][Set ID][ ][OK][Data][x]
Data
Red: 00H
Green: 64H
~
*Tint:-50~+50
Sharpness(Command : k) (TV, AV only)
▶To adjust the screen Sharpness.
You can also adjust the sharpness in the Picture
11.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data
Min:00H~Max:64H
A42
menu.
ENGLISH
the
Controlling
Transmission /
12. OSD Select
Multiple
Receiving
(Command
:
Monitors
Protocol
l)
▶To control OSD on/off to the set.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data0:OSDOff
1:OSDOn
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data0:OSDOff
13. Remote Lock
1:OSDOn
On/Off(Command
:
m)
▶To control Remote Lock on/off to the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0
:
Remote Lock Off
1
:
Remote Lock On
1
:
Remote Lock On
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0
:
Remote Lock Off
14. PIP/PBP/POP
On/Off(Command
:
n)
▶ To control PIP/PBP/POP On/Off of the Set.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data0:OFF
1:PIP
2:PBP
3:POP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data0:OFF
1:PIP
2:PBP
3:POP
A43
(RS-232C protocol)
Transmission /
Receiving
15. PIP
Position(Command
adjust PIP position.
▶ To
:
Protocol
ENGLISH
q)
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0
:
Bottom of the
1
:
Bottom of the left side
2
:
3
:
Top
Top
right
of the left side
of the
right
side
on screen
on screen
on screen
side
on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0
:
Bottom of the
1
:
Bottom of the left side
2
:
3
:
Top
Top
right
of the left side
of the
right
side
on screen
on screen
on screen
side
on screen
16.
Balance(Command : t)
▶To adjust the sound Balance.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
Data
Min:00H~Max:64H
(Hexadecimal code)
Acknowledgement
[t][ ][Set ID][ ][OK][Data][x]
Data
*
Min:00H~Max:64H
Balance
:
-50
+50
~
A44
the
Controlling
Transmission /
Multiple
Receiving
Monitors
Protocol
17.
ACC(Command : u)
▶To adjust the screen color temperature.
Transmission
[k][u][ ][Set ID][ ][Data]][Cr]
Data 0
Normal
:
2
(9300K)
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
Acknowledgement
[u][ ][Set ID][ ][OK]][Data][X]
Data 0
Normal
:
(9300K)
2
:
Warm
(6500K)
1:Cool
3:User
PC:0,2,3
AV:0,1,2
18. PIP/PBP/POP
SOURCE(Command
▶To select the sub-screen
:
y)
source.
Transmission
[k][y][ ][Set ID][ ][Data][Cr]
Data0:TV
2:AV1
3
:
S-Video
4
:
Component
5:AV2
6:RGBPC
8:DVIPC
Acknowledgement
[y][ ][Set ID][ ][OK][Data][X]
Data0:TV
2:AV1
3
:
S-Video
4
:
Component
5:AV2
6:RGBPC
8:DVIPC
19. Auto
Configure(Command : j u)
▶To adjust picture position and minimize image shaking
automatically. it works only in RGB(PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data1:ToSet
Acknowledgement
[u][ ][Set ID][ ][OK][Data][X]
A45
(RS-232C protocol)
Transmission /
Receiving
Protocol
20. Tune
command(Command : m a)
▶Tune channel to following physical number.
Transmission
[m][a][ ][Set ID][ ][Data][ ][Cr]
Data 1
:
Channel Number
Acknowledgement
[a][ ]Set ID][ ][OK][Data][X]
Data 1
:
Channel Number
21.Key(Command
c)
key code.
: m
▶To send IR remote
Transmission
[m][c][ ][Set ID][ ][Data][Cr]
Data
Key
code
:
Refer to page 48.
Acknowledgement
[c][ ]Set ID][ ][OK][Data][X]
A46
ENGLISH
IR Codes
How to connect
▶ Connect your wired remote control to Remote Control port
on
the Monitor.
Remote Control IR Codes
▶
Output
waveform
single pulse,
modulated with 37.917KHz
signal
at 455KHz
Tc
Carrier
FCAR
T1
▶
Configuration
Duty
frequency
1/Tc
=
ratio
=
=
fosc/12
T1/TC
=
1/3
of frame
?1st frame
Lead
code
Low
custom code
High
Data code
custom code
Data code
C0C1C2C3C4C5C6C7C0C1C2C3C4C5C6C7D0D1D2D3D4D5D6D7D0D1D2D3D4D5D6D7
?Repeat frame
Repeat
code
Tf
?Lead code
9ms
4.5ms
0.55ms
?Repeat
code
9ms
2.25ms
▶
Bit
description
?Bit "0"
?Bit "1"
0.56ms
0.56ms
1.12ms
▶
Frame interval
:
2.24ms
Tf
?The waveform is transmitted
as
long
as a
Tf
key
Tf
Tf=108ms@455KHz
A47
is
depressed.
Function
Note
00
PR(▲)
R/C Button
01
PR(▼)
R/C Button
02
VOL(▶)
R/C Button
03
VOL(◀)
R/C Button
08
POWER ON/OFF
R/C
C4
POWER ON
Discrete IR
Code(Only
Power
On)
C5
POWER OFF
Discrete IR
Code(Only
Power
Off)
09
MUTE
R/C Button
10
Number
Key
0
R/C Button
11
Number
Key
1
R/C Button
12
Number
Key
2
R/C Button
13
Number
Key
3
R/C Button
14
Number
Key
4
R/C Button
15
Number
Key
5
R/C Button
16
Number
Key
6
R/C Button
17
Number
Key
7
R/C Button
18
Number
Key
8
R/C Button
19
Number
Key
9
R/C Button
0B
TV/AV
R/C Button
98
SOURCE
R/C Button
D6
TV
Discrete IR
Code(Input
TV
5A
AV1
Discrete IR
Code(Input
AV1
D8
S-Video
Discrete IR
Code(Input
S-Video
BF
Component
Discrete IR
Code(Input Component Selection)
D0
AV2
Discrete IR
Code(Input
AV2
C6
DVI
Discrete IR
Code(Input
DVI
D5
RGB
Discrete IR
Code(Input
RGB
0E
SLEEP
R/C Button
43
MENU
R/C Button
44
OK
R/C Button
60
PIP
R/C Button
63
SWAP
R/C Button
79
ARC
R/C Button
76
ARC(4:3)
Discrete IR
Code(Only
4:3
77
ARC(Full)
Discrete IR
Code(Only
Full
AF
ARC(ZOOM)
Discrete IR
Code(Only
Zoom
54
AUTO PROGRAM
R/C Button
39
CAPTION
R/C Button
99
AUTO CONFIG
Discrete IR Code
Code(Hexa)
Button(Power On/Off)
A48
Selection)
Selection)
Selection)
Selection)
Selection)
Selection)
mode)
mode)
mode)
ENGLISH
Troubleshooting
No
image
Is the monitor power cord connected?
Is the power indicator
light on?
Power is on, power indicator is green
but the
screen
appears
is
?
displayed
See if the power cord is
outlet.
?
See if the power switch is turned
?
Adjust brightness (
?
range'
message
?
appear?
The
(
) again.
cable' message
?
?
move
the
key.
press any
from the PC
signal
Maximum resolution
RGB PC
:
DVI PC
1360
The
:
1600
x
x
1200 @60Hz
768 @60Hz
cable between PC and monitor is not
signal
connected. Check the
appear?
saving mode,
(video card) is out of the
vertical or horizontal frequency range of the
monitor. Adjust the frequency range by referring
to the Specifications in this manual.
*
signal
and contrast
)
If the monitor is in power
mouse or
Does the 'Check
on.
extremely dark.
Is the power indicator amber?
Does the 'Out of
properly connected to the
Press the 'SOURCE'
signal
menu
controller to check the
cable.
in the remote
input signal.
'Unknown Monitor' message appears when the monitor is connected.
Did you install the driver?
?
Install the monitor
the
monitor,
or
driver, which is provided with
download it from the web site.
(http://www.lge.com)
?
See if the
referring
plug&play function
to the video card
is
user
supported by
manual.
'Controls locked' message appears.
The 'Controls locked' message
appears when pressing the Menu
button.
Note
?
The control
locking function prevents unintentional
OSD setting change due to careless usage. To
unlock the controls, simultaneously press the Menu
button and ▶ button for 5 seconds. (You cannot set
this function using the remote controller buttons. You
can set this function in the monitor only.)
*
Vertical frequency: To enable the user to watch the monitor display, screen image should be changed tens of times
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.
The unit is Hz.
*
Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal
frequency. The unit is kHz.
A49
The
Is the
screen
screen
image
position wrong?
?
looks abnormal.
D-Sub
analog signal
Press the "AUTO" button in
--
the remote controller to
optimal
screen
mode. If
?
status that fits into the current
adjustment
Position OSD
automatically select the
is not
satisfactory,
use
the
menu.
See if the video card resolution and
supported by the
monitor.
frequency are
If the frequency is out of
range, set to the recommended resolution in the
Control Panel
Display Setting menu.
--
?
Do thin lines appear on the
background screen?
D-Sub
analog signal
screen
mode. If
or
the
?
D-Sub
screen
in the
the
automatically select an
is not
satisfactory,
use
the
menu.
?SeeiftheZoomvalueissetto0.Ifitis,you
cannot adjust the H/V Position value.
menu.
Screen size is
automatically adjusted
?
If the
PC,
when connected to the PC.
screen
Brightness
differs in the main and
sub
when connected to the
screen
?
size is not full when connected to the
execute the PIP/POP/PBP to
screen
change to full
mode.
You cannot
adjust brightness and tint
PIP/POP/PBP Screen
menu
in the
for the sub-screen
among PIP/POP/PBP menus. Therefore,
brightness can be different for the sub-screen.
PC.
The
use
status that fits into the current
adjustment
Phase OSD
Unable to
satisfactory,
Press the "AUTO" button
--
in the remote controller to
mode. If
Zoom
is not
menu.
analog signal
optimal
automatically select an
status that fits into the current
adjustment
Clock OSD
adjust the
horizontal/vertical position
Press the "AUTO" button
--
in the remote controller to
optimal
Horizontal noise appears
characters look blurred.
--
screen
is
displayed abnormally.
?
The proper
input signal
signal port.
Connect the
with the
No sound appears in the TV channel
display window.
signal
input signal.
cable that matches
?SeeiftheTVsoundissettomono.ifitis,the
sound will not be
After-image appears
After-image appears when the
monitor is turned off.
source
is not connected to the
?
on
displayed.
the monitor.
If you use a fixed image for a long time, the pixels
may be damaged quickly. Use the screensaver
function.
A50
ENGLISH
Troubleshooting
The audio function does not work.
No sound?
No sound is available when the
PIP/POP/PBP mode is
?
See if the audio cable is connected
?
Adjust the volume.
?
See if the sound is set
?
See if the Sound is set to On in the PIP/POP/PBP
properly.
properly.
menu.
engaged.
Sound is too dull.
?
Sound is too low.
?
Select the
appropriate equalize
sound.
Adjust the volume.
The TV function does not work.
The TV
The
The
signal
screen
screen
menu
is not
being
received.
?
See if you have selected the proper channel
mode.
?
Use the automatic channel
?
See if the TV antenna is
size function in the OSD
size function in the OSD
?
setup function.
properly
connected.
does not work.
menu
See if the PIP/POP/PBP function is in
PIP/POP/PBP function is in use, the
function may not work.
does not work.
use.
If the
screen
size
Screen color is abnormal.
Screen has poor color resolution
?
Set the number of colors to
Select Control Panel
Table
Screen color is unstable
or mono-
?
(true
menu
Display
--
--
Settings
--
Color
in Windows.
Check the connection status of the
signal
cable.
Or, re-insert the PC video card.
colored.
screen?
than 24 bits
color)
(16 colors).
Do black
more
spots appear
on
the
?
Several
green, white or black color)
the screen, which can be
pixels (red,
may appear on
attributable to the
LCD
A51
panel.
unique
It is not
a
characteristics of the
malfunction of the LCD.
Specifications
The
product specifications
can
change
without
notice for
prior
product improvement.
LCD Panel
Power
[L3200T]
32 inches
(80.04 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 80.04 cm
0.5025 mm (Pixel Pitch)
[L3700T]
37 inches
[L4200T]
42 inches
(94.03 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Visible diagonal size: 94.03 cm
0.6000 mm (Pixel Pitch)
(106.68 cm) TFT (Thin Film Transistor)
LCD (Liquid Crystal Display) Panel
Anti-Glare coating
Visible diagonal size: 106.68 cm
0.681 mm (Pixel Pitch)
[L3200T]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.0A
On Mode
Sleep
Mode
Off Mode
:
160W
:≤4W
:≤2W
[L3700T]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.4A
On Mode
Sleep
Mode
Off Mode
:
220W
:≤4W
:≤3W
[L4200T]
Rated
Voltage
Power Consumption
AC 100-240V~50/60Hz 2.8A
On Mode
Sleep
Mode
Off Mode
:
300W
:≤4W
:≤3W
NOTE
Information in this document is
subject to change without
A52
notice.
ENGLISH
Specifications
The
product specifications
change
can
without
prior
notice for
[2]
[1]
Dimensions
product improvement.
&Weight
H
H
W
D
W
D
[4]
[3]
H
H
D
W
Width
x
Height
x
D
W
Depth
[L3200T]
[1] 80.30 cm
[2] 80.30 cm
[3] 96.40 cm
[4] 96.40 cm
(31.61 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
(31.61 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
(37.95 inches) x 54.00cm (21.26 inches) x 18.00 cm (7.09 inches)
(37.95 inches) x 49.30 cm (19.4 inches) x 9.99 cm (3.93 inches)
[L3700T]
[1] 92.80 cm
[2] 92.80 cm
[3] 112.9 cm
[4] 112.9 cm
(36.54 inches) x 61.90 cm
(36.54 inches) x 57.12 cm
(44.45 inches) x 61.90 cm
(44.45 inches) x 57.12 cm
(24.37 inches) x 22.77 cm
(22.49 inches) x 12.00 cm
(24.37 inches) x 22.77 cm
(22.49 inches) x 12.00 cm
(8.96 inches)
(4.72 inches)
(8.96 inches)
(4.72 inches)
(41.61 inches) x 70.20 cm
(41.61 inches) x 65.30 cm
(49.57 inches) x 70.20 cm
(49.57 inches) x 65.30 cm
(27.64 inches) x 29.45 cm
(25.71 inches) x 11.91 cm
(27.64 inches) x 29.45 cm
(25.71 inches) x 11.91 cm
(11.59 inches)
(4.69 inches)
(11.59 inches)
(4.69 inches)
[L4200T]
[1]
[2]
[3]
[4]
105.7
cm
105.7
cm
125.9
cm
125.9
cm
Net
[L3200T]
[1] 19.4 kg (42.77 lbs)
[3] 21.1 kg (46.52 lbs)
[2]
[4]
16.0
kg (35.27 lbs)
17.7 kg (39.02 lbs)
[L3700T]
[1] 31.1 kg (68.56 lbs)
[3] 39.1 kg (86.20 lbs)
[2] 29.0 kg (63.93 lbs)
[4] 35.1 kg (77.38 lbs)
[L4200T]
[1] 41.4 kg (91.27 lbs)
[3] 44.0 kg (97.00 lbs)
[2] 37.0 kg (81.57 lbs)
[4] 39.6 kg (87.30 lbs)
A53
The
product specifications
Video
Signal
change
can
without
Max. Resolution
product improvement.
RGB PC
:
DVI PC
1360 X 768 @60Hz
:
1600 X 1200 @60Hz
depending on
Recommended Resolution
notice for
prior
RGB PC
:
the OS
video card
or
It may not be
--
supported
type.
WXGA 1360 X 768 @60Hz
DVIPC:WXGA1360X768@60Hz--Itmaynotbe
supported depending
Horizontal
Frequency
RGB PC
:
30
the OS
on
or
video card
type.
83 kHz
-
DVIPC:30-72kHz
Vertical
Frequency
Synchronization Type
Conditions
*
Applicable only
85 Hz
Separate/Composite/SOG (Sync On Green)/Digital
Operational Condition Temperature: 10˚C 35˚C Humidity: 10%
Storage Condition
Temperature: -20˚C 60˚C Humidity: 5%
~
,
~
,
for models that
support the speakers
RMS Audio
Audio
-
15-pin D-sub type, DVI-D (digital), S-Video,
Composite Video, HDTV, DVD
Input Connector
Environmental
56
Output
Input Sensitivity
Speaker Impedance
10W+10W(R+L)
0.7Vrms
8Ω
NOTE
Information in this document is
subject to change without
A54
notice.
80%
~
95%
~
ENGLISH
Specifications
PC Mode
--
Preset Mode
Preset mode
Vertical
Frequency
(kHz)
Frequency
(Hz)
Horizontal
Horizontal
Vertical
Frequency Frequency
(kHz)
(Hz)
Preset mode
1
VGA
640
x
350
31.469
70
11
VESA 1024
x
768
60.123
75
2
VGA
720
x
400
31.468
70
12
VESA 1024
x
768
68.68
85
3
VGA
640
x
480
31.469
60
13
VESA 1280
x
720
44.772
60
4
VESA 640
x
480
37.500
75
14
VESA 1360
x
768
47.72
60
5
VESA 640
x
480
43.269
85
15
VESA 1280
x
1024
63.981
60
6
VESA 800
x
600
37.879
60
16
VESA 1280
x
1024
79.98
75
7
VESA 800
x
600
46.875
75
17
VESA 1600
x
1200
75.00
60
8
VESA 800
x
600
53.674
85
9
MAC
x
624
49.725
75
48.363
60
10
832
VESA 1024
x
768
RGBPC:Mode1~Mode17
DVIPC:Mode1~Mode15
Power Indicator
Mode
Monitor
On Mode
Sleep
Green
Mode
Amber
Off Mode
-
VESA wall
mounting
Connected to another
object (stand type and wall-mounted type.) This
monitor accepts a VESA-compliant mounting interface pad.- (optional)
For further information, refer to the VESA Wall Mounting Instruction
Guide.
Kensington Security Slot- optional
Connected to a locking cable that can
separately at most computer stores
A55
be
purchased
Download PDF