LG | M1917TM-SN | LG M1917TM-SN Owner’s Manual

User's Guide
M1717TM
M1917TM
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the product and quote this information to your
require service.
Precautions
Important
This unit has been
engineered and manufactured to ensure your personal
safety,
improper use may result in potential eletrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
however
On
Use
Safety
only the
cord, make
power cord supplied with the unit. In case you use another power
that it is certified by the applicable national standards if not being
sure
provided by the supplier. If the
manufacturer
or
power cable is faulty in any way, please contact the
the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
or listed on the display. If you are not sure what type of power supply
this manual
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
There
are no user
There
are
serviceable components inside.
Dangerous High Voltages inside, even when the
Contact your dealer if the display is not operating properly.
power is OFF.
To Avoid Personal
Injury :
place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
A1
On Installation
Do not allow
the
anything
display where the
Do not
use
this
to rest upon or roll over the power cord, and do not
power cord is subject to damage.
display
sink, laundry tub, in
near water
a wet
such
basement,
as near a
place
bathtub, washbowl, kitchen
swimming pool.
or near a
Displays are provided with ventilation openings
in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the
display
in
a
built-in enclosure unless proper ventilation is
provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub
mar, or
or
strike the Active Matrix LCD with
damage
the Active Matrix LCD
Do not press the LCD
some
screen
with your
anything hard
permanently.
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible,
use
the recommended resolution to obtain the best
image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD
On
panel.
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On
Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
Connecting
Before
the
Display
setting up the monitor, ensure that the power to the monitor, the
computer system, and other attached devices is turned off.
Connecting the stand
base
1. Place the monitor with its front facing downward on a cushion or soft cloth.
2. Align the hooks on the stand base with the matching slots in the base of
the monitor.
3.
Hook
Insert the hooks into slots.
Removing the stand
1.
2.
base
Place the monitor with its front
To
pull
remove
facing
downward
on a
cushion
the stand base, hold the bottom of the stand with
the base bottom latch with the other hand,
as
soft cloth.
or
one
shown in the
hand and
figure.
Bottom Latch
Important
This illustration
depicts the general
picture.
model of connection. Your monitor may differ from
the items shown in the
Once you connect the stand base, try not to disconnect it.
Do not carry the product upside down holding only the stand base. The
fall and get
damaged or injure
your foot.
A3
product
may
the
Connecting
Display
Before
setting up the monitor, ensure that the power
system, and other attached devices is turned off.
to the
monitor, the computer
Positioning your display
1. Adjust the position
Tilt
Range
:
of the
panel
in various ways for maximum comfort.
-3˚~25˚
Ergonomic
It is recommended that in order to maintain
position, the forward tilt angle of the
an
ergonomic and comfortable viewing
degrees.
monitor should not exceed 5
A4
Connecting
the
Display
Using the Computer
1.
Place the monitor in
a
convenient, well-ventilated location
near
your computer. To
height of your monitor, unlock the stand lock on top of the stand.
2. Connect the signal cable. When attached, tighten the thumbscrews to
3.
connection. 1
Connect the power cord into
to the
display.
a
proper power outlet that is
secure
easily accessible and
adjust
the
close
2
Power Cord
Signal Cable
Varies according to model.
NOTE
This is
Wall-outlet type
a
simplified representation
of the rear view.
This rear view represents
a
2
general model; your display
differ from the view as
may
shown.
1
PC-outlet type
PC
PC
MAC
Mac adapter
For Apple Macintosh use,
a separate plug adapter is needed to
change the 15 pin high density (3 row) D-sub VGA connector on
the supplied cable to a 15 pin 2 row connector.
4.
Press
on.
button
on
the front switch
Setting Function' is
(Only Analog Mode)
NOTE
Self Image Setting
'
panel
to turn the power
When monitor power is turned on, the 'Self
executed
Function'? This function
Image
automatically.
optimal display settings.When the user
to optimal settings for individual
input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push
the 'AUTO/SET' button on the front panel of the monitor. Otherwise, you may execute the Factory reset' option on
the OSD adjustment menu. However, be aware that this option initializes all the menu items except 'Language'.
connects the monitor for the first
provides the
user
with
time, this function automatically adjusts the display
'
A5
Connecting
the
Display
Bottom
PC AUDIO
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.
Audio
Input
Connects to the *LINE OUT
jack
of the
PC sound card.
<Display
-
Back>
*LINE OUT
A terminal used to connect to the
speaker including a built-in amplifier
(Amp). Make sure that the connecting
Speaker Out
terminal of the PC sound card is checked
*Line Out
before
connecting. If the Audio Out
only Speaker Out,
of PC
sound card has
reduce the PC volume.
If the Audio Out of the PC sound card
supports both Speaker Out and Line Out,
convert to Line Out
using the card
(Refer to the
of the program
Sound Card Manual).
jumper
<Jack of the PC sound card>
A6
Control Panel Functions
Front Panel Controls
Control
Power Button
Power Indicator
Function
Use this button to turn the
This Indicator
lights
up
display
green/blue
on or
off.
when the
display
operates normally(On Mode). If the display is in Sleep
Mode
(Energy Saving),
this indicator color
changes
to amber.
AUTO/SET
Use this button to enter
Button
Display.
a
selection in the On Screen
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button before entering the On Screen
Display(OSD). This will automatically adjust your
display image to the ideal settings for the current
screen resolution size (display mode).
The best
display
mode is
17 inch monitor
:
1280x1024
19 inch monitor
:
1280x1024
AA7
Control Panel Functions
Front Panel Controls
Control
Function
Use these buttons to decrease
VOL Buttons
or
increase
the volume level.
Buttons
Use these buttons to select
Screen
adjust functions
or
in the On
Display.
Lightview
hot
key
This feature lets you easily select the best desired
NIGHT image condition optimized to the environment
DAY
(ambient illumination, image types etc).
?
DAY
?
NIGHT
:
?
TEXT
For text
?
MOVIE
?
?
SOURCE hot
key
:
Bright ambient
illumination
Dark ambient illumination
images (Word processing etc.)
images in videos or movies
PHOTO : For pictures or drawings
NORMAL : This is under normal operating conditions
:
:
For animation
Use this button to make D-Sub
This feature is used when two
to the
MENU Button
display.
The default
or
setting
Use this button to enter
or
DVI connector active.
computers
are
connected
is D-Sub.
exit the On Screen
Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for servaral seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for servaral seconds. The message
"OSD UNLOCKED" should appear.
MUTE Button
Used to select mute on
mute off (means sound
A8
(means
on).
sound
off)
and
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
MENU
Display, follow these steps:
AUTO/SET
MENU
MENU
Press the MENU Button, then the main
To
access a
becomes
making image adjustments.
control,
use
highlighted,
Use the
the
menu
of the OSD appears.
Buttons. When the icon you want
or
press the AUTO/ SET Button.
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the MENU Button.
Exit the OSD
by pressing the MENU Button.
A9
On Screen
The
and
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
setting menus.
Main
Sub
menu
PICTURE
AD
menu
Reference
To
BRIGHTNESS
adjust the brightness,
contrast and gamma of the
CONTRAST
screen
GAMMA
COLOR
PRESET
6500K
To customize the color of the
9300K
screen
RED
GREEN
BLUE
POSITION
HORIZONTAL
To
VERTICAL
TRACKING
of the
CLOCK
To
improve the clarity
stability of the screen
PHASE
SETUP
adjust the position
screen
and
LANGUAGE
OSD
HORIZONTAL
To customize the
screen
status for a user's
operating
environment
POSITION VERTICAL
WHITE BALANCE
POWER INDICATOR
FACTORY RESET
:
A
:
D
:
Adjustable
Analog Input
Digital Input
NOTE
The order of icons may differ
depending
on
A10
the model (A10~A13).
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
Press the MENU
Button, then the main menu of the OSD appears.
Menu Name
Icons
Sub-menus
NOTE
OSD (On Screen
Display)
menu
languages
on
A11
the monitor may differ from the manual.
On Screen
Main
Display(OSD)
menu
Selection and
Sub
Adjustment
Description
menu
PICTURE
of the
BRIGHTNESS
To
adjust the brightness
CONTRAST
To
adjust the
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display
values
contrast of the
screen.
screen.
whitish images and low gamma
display high contrast images.
COLOR
Select the screen color.
6500K: Slightly reddish white.
9300K: Slightly bluish white.
PRESET
?
?
RED
Set your
own
red color levels.
GREEN
Set your
own
green color levels.
BLUE
Set your
own
blue color levels.
POSITION
HORIZONTAL
To
move
image left
VERTICAL
To
move
image
CLOCK
To minimize any vertical bars
stripes visible on the screen
and
right.
up and down.
TRACKING
background.The horizontal
change.
or
screen
size will also
PHASE
To
adjust
the focus of the
display.
This item allows you to remove any
horizontal noise and clear or
sharpen
A12
the
image
of characters.
On Screen
Display(OSD)
Main
menu
Selection and
Sub
Adjustment
Description
menu
SETUP
LANGUAGE
To choose the
control
OSD
POSITION
language in which
displayed.
the
names are
To
adjust position
on
the
of the OSD window
screen.
If the output of the video card is different
required specifications, the color
WHITE
BALANCE
the
level may deteriorate due to video
distortion. Using this function, the
signal
signal
level is
adjusted
to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors
POWER
INDICATOR
are
present in the
screen.
Use this function to set the power
indicator on the front side of the monitor
to ON
or
OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned
FACTORY
on.
Restore all factory default settings except
"LANGUAGE."
Press the
button to reset immediately.
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
the input signal is an analog signal.
A13
only when
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
Check and
display connected?
properly to the power outlet.
Is the power indicator
light on?
Touch the Power button.
Is the power on and the
power indicator blue or
Adjust the brightness
see
if the power cord is connected
and the contrast.
green?
Is the power indicator
amber?
If the
the
display
mouse or
is in power
saving mode, try moving
pressing any key on the keyboard
bring up the screen.
Try to turn on the PC.
to
Do you see an "OUT
OF RANGE" message
on
the screen?
Do you see a "CHECK
SIGNAL CABLE"
message
screen?
Do you
on
the
see a
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
This message appears when the signal cable
between your PC and your display is not
connected. Check the
"OSD LOCKED" message
Do you see "OSD
LOCKED" when you
push
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
MENU button?
You
on
signal
cable and try
again.
the screen?
the current control settings,
they cannot be inadvertently
changed. You can unlock the OSD controls
at any time by pushing the MENU button for
so
can secure
that
serveral seconds: the message
"OSD UNLOCKED" will appear.
A14
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the AUTO/SET button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, adjust the
image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed.
If yes, readjust the video card to the recommend
resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Press the AUTO/SET button to
on screen
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in the
display.
Press the AUTO/SET button to
automatically adjust
your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars
screen
using the PHASE icon
in the on
display.
Check Control Panel
--> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
The
screen
mono or
color is
abnormal.
Check if the signal cable is
properly connected and
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
use a
slot.
Set the color setting
at Control Panel
The
screen
blinks.
-
higher than 24 bits (true color)
Settings.
Check if the screen is set to interlace mode and
if yes,
change it to the recommend
resolution.
Make sure the power voltage is high enough, It has
to be higher than AC100-240V 50/60Hz.
A15
Troubleshooting
Have you installed the
Have you installed the
display
driver?
driver?
display
Be
sure
to install the
driver CD
display
your display. Or, you
driver from
Do you
see an
"Unrecognized monitor,
display driver from the
(or diskette) that comes with
Make
sure
Plug&Play
our
also download the
can
web site:
http://www.lge.com.
to check if the video card
supports
function.
Plug&Play (VESA DDC)
monitor found"
message?
Audio function
No sound.
Check if the audio cable is
Check the volume level.
Sound level is too low.
Check the volume level.
A16
correctly connected.
17inch
Specifications
Display
17 inches (43.2cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
0.264 mm pixel pitch
Sync Input
Horizontal
Analog : 30 83kHz (Automatic)
Digital : 30 71kHz (Automatic)
Freq.
-
-
Vertical
Input
Form
-
75Hz (Automatic)
Max
Separate TTL,
SOG (Sync On Green)
Digital
15 pin D-Sub Connector
DVI D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
Analog: VESA 1280 x 1024@75Hz
Recommend
VESA 1280
Input
Video
56
Freq.
Signal Input
-
Input Form
Resolution
Digital: VESA 1280
Plug&Play
Audio
x
1024@60Hz
1024@60Hz
x
DDC 2B
RMS Audio
Output 1W+1W(R+L)
0.7Vrms
Input Sensitivity
Speaker Impedance 16Ω
Consumption
On Mode
Sleep Mode
Off Mode
37W
:
≤1W
≤1W
Dimensions
Width
38.95 cm / 15.33 inches
43.79 cm / 17.24 inches
23.20 cm / 9.13 inches
Power
&Weight
(with tilt stand)
Tilt
Range
Power
Input
Environmental
Conditions
Height
Depth
Net
5.28 kg (11.64 lbs)
Tilt
-3˚~25˚
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C
to 35 ˚C
10 % to 80 % non-Condensing
Conditions
Humidity
Storage
Temperature -20˚C
Tilt Stand
Signal
cable
Power cord
Attached( O ), Detached (
Attached(
to 60 ˚C
5 % to 95 %
Humidity
non-Condensing
)
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A17
notice.
19inch
Specifications
Display
19 inches (48.18cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
19 inches viewable
0.294 mm pixel pitch
Sync Input
Horizontal
Freq.
Analog : 30 83kHz (Automatic)
Digital : 30 71kHz (Automatic)
Vertical Freq.
56 75Hz (Automatic)
Form
Input
Separate TTL,
SOG (Sync On Green)
Digital
-
-
-
Video
Input
Input Form
pin D-Sub Connector
D connector (Digital)
RGB Analog (0.7Vp-p/75ohm), Digital
Max
Analog: VESA 1280 x 1024@75Hz
Recommend
VESA 1280
15
Signal Input
DVI
Resolution
-
Digital: VESA 1280
Plug&Play
Audio
x
x
1024@60Hz
1024@60Hz
DDC 2B
RMS Audio
Output 1W+1W(R+L)
0.7Vrms
Input Sensitivity
Speaker Impedance 16Ω
Consumption
On Mode
Sleep Mode
Off Mode
42W
:
≤1W
≤1W
Dimensions
Width
44.36 cm / 17.46 inches
47.56 cm / 18.72 inches
23.20 cm / 9.13 inches
Power
&Weight
(with tilt stand)
Tilt
Range
Height
Depth
Net
5.98
Tilt
-3˚~25˚
kg (13.18 lbs)
Power Input
AC 100-240V~50/60Hz 1.0A
Environmental
Operating Conditions
Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Tilt Stand
Attached( O ), Detached (
Signal
cable
Power cord
Attached(
)
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A18
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
Horizontal
Vertical
Freq. (kHz)
Freq. (Hz)
1
VGA
640
x
350
31.469
70
2
VGA
720
x
400
31.468
70
3
VGA
640
x
480
31.469
60
4
VESA
640
x
480
37.500
75
5
VESA
800
x
600
37.879
60
6
VESA
800
x
600
46.875
75
7
MAC
832
x
624
49.725
75
8
VESA
1024
x
768
48.363
60
9
VESA
1024
x
768
60.023
75
10
MAC
1152
x
870
68.681
75
11
VESA
1152
x
900
61.805
65
*12
VESA
1280
x
1024
63.981
60
**13
VESA
1280
x
1024
79.976
75
*Recommend Mode
**
Indicator
Mode
On Mode
Sleep Mode
Off Mode
LED Color
Green/Blue
Amber
Off
A19
Only Analog
Mode
How to Install the Rack wall
This monitor meets
mounting
interface
VESA-compliant mounting
pad
specifications.
1.
Please the monitor
front side
2. Separate
facing
on a
piece of cloth
or
other soft surface with the
downward.
the stand Cover using
screwdriver
a
as
shown in the
picture.
Stand Cover
3. Separate
4.
the stand base
using
Install the VESA standrad wall
a
screwdriver
as
shown in the
picture.
mounting.
VESA wall
mounting
Connected to another
(stand type
object
and wall-mounted
type. This monitor accepts
PC
a
VESA-compliant mounting
interface pad.-optional)
For further information, refer
the VESA Wall Mounting
Audio
Instruction Guide.
Kensington Security Slot- optional
a locking
cable that can be purchased separately
Connected to
A20
at most
computer
stores
to
Digitally yours
Download PDF