LG | W2253V-PF | LG W2253V-PF Owner’s Manual

User’s Guide
W2253V
W2353V
Make sure to read the Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for future reference.
See the label attached on the product and give the information to your
dealer when you ask for service.
Important Precautions
This unit has been engineered and manufactured to ensure your personal safety,
however improper use may result in potential electrical shock or fire hazards. In
order to allow the proper operation of all safeguards incorporated in this display,
observe the following basic rules for its installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
A1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
A2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
A3
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
Stand Body
Stand Base
3. Tie down the base lock to perpendicularity direction.
4. Once assembled take the monitor up carefully and face
the front side.
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
A4
Connecting the Display
Disassembling the stand
1. Put a cushion or soft cloth on a flat
2. Place the monitor face down on
surface.
3.
the cushion or soft cloth.
Change your lock on the product as it follows and turn it in the arrow direction.
If you can't release the stand base even the locking rib is at a release position, Please
push the indicated rib down and retry it.
4. Pull out the stand to remove.
A5
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Positioning your display
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range: -5˚~15˚
Ergonomic
It is recommended that in order to maintain an ergonomic and comfortable viewing
position, the forward tilt angle of the monitor should not exceed 5 degrees.
A6
Connecting the Display
Using the Computer
1.
Make sure to turn off the computer and product. Connect the cable as below
sketch map form 1 to 2 .
A Connect DVI-D Cable
B Connect D-sub Cable (PC)
C Connect D-sub Cable (Mac)
D Connect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as
shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with
ferrite cores to maintain standard compliance for the product.
Power Cord
Headphone/Earphone Input
Signal Cable
Wall-outlet type
AV equipment
(Set-Top Box, DVD, Video,
Video Game Console)
DVI-D(This feature is not
available in all countries.)
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
2.
Touch the power button on the front of panel to turn
the power on. When monitor power is turned on, the
'Self Image Setting Function' is executed
automatically. (Only to the D-sub signal cable input)
NOTE
'Self Image Setting Function'? This function provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals.
'AUTO/SET Function'? When you encounter problems such as blurry screen, blurred letters, screen flicker
or tilted screen while using the device or after changing screen resolution, touch the AUTO/SET function button
to improve resolution.
A7
Connecting the Display
OPEN
Using the cable holder (This feature is not available in all models.)
Cable holder
2
OPEN
1
4
3
EN
OP
A8
Control Panel Functions
Front Panel Controls
1
2
3
4
5
Control
Button
Button
MENU Button
6
7
8
Function
Use this button to enter CINEMA MODE,AUTO
BRIGHT,TIME CONTROL,LIVE SENSOR,SMART
items,for more information,refer to page A17.
DSUB and DVI input,use this button to enter EZ
ZOOMING,4:3 IN WIDE,PHOTO EFFECT items.
HDMI input,use this button to enter 4:3 IN WIDE,
PHOTO EFFECT,VOLUME items.
For more information,refer to page A18 -A19 .
Use this button to enter or exit from the On Screen Display.
OSD LOCKED/UNLOCKED
This function allows you to lock the current control settings, so
that these settings are not inadvertently changed. To lock the
OSD settings, press and hold the MENU button for several
seconds. The message "OSD LOCKED" appears.
You can unlock the OSD settings at any time by
pushing the MENU button for several seconds. The
message "OSD UNLOCKED" appears.
A9
Control Panel Functions
Control
Function
Buttons
Button
(
Use these buttons to select or adjust functions in the On
Screen Display.
For more information, refer to page A20 -A21.
)
Button
(SOURCE)
AUTO/SET
Button
Use this button to make either D-Sub,DVI or HDMI
connector active. This feature is used when two
computers are connected to the display. The default
setting is D-Sub.
Use this button to select an icon in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press
the AUTO/SET button prior to entering the On
Screen Display(OSD). This will automatically adjust
your display image to the ideal settings for the
current screen resolution size (display mode).
The best display mode is:
W2253V : 1920 x 1080
W2353V : 1920 x 1080
Power Button
Use this button to turn the display on or off.
Power Indicator
This Indicator lights up as red when the display is
operating normally(On Mode). If the display is in
Sleep Mode (Energy Saving), this indicator color
changes to flicker.
Light Sensor
This is lens for light sensor sletect outside luminance,
when setting AUTO BRIGHT ON.
A10
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system.
A short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the display to stabilize for at least 30 minutes before making image adjustments.
To make adjustments in the On Screen Display, follow these steps:
Press the MENU Button, then the main menu of the OSD appears.
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level. Use the
AUTO/SET Button to select other sub-menu items.
Push the MENU Button once to return to the main menu to select another
function. Push the MENU Button twice to exit from the OSD.
A11
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
Main menu
Sub-menu
A
D
CINEMA MODE
AUTO BRIGHT
TIME CONTROL
LIVE SENSOR
SMART
EZ ZOOMING
4:3 IN WIDE
PHOTO
EFFECT
COLOR
TRACKING
SETUP
FLATRON
F-ENGINE
Reference
To focus on the moving picture selected.
To control screen brightness automatically.
To mind user using time.
To control touch key distance.
To control smart key menu.
To adjust the resolution
To adjust the image size
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
To adjust screen color mode
To adjust the volume
VOLUME
PICTURE
H
BRIGHTNESS
CONTRAST
GAMMA
**BLACK LEVEL
sRGB
PRESET
6500K
9300K
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
CLOCK
PHASE
SHARPNESS
LANGUAGE
HORIZONTAL
OSD
POSITION VERTICAL
*WHITE BALANCE
**OVERSCAN
RTC
POWER INDICATOR
FACTORY RESET
MOVIE
*INTERNET
**GAME
USER
*NORMAL
**STANDARD
*DEMO
**SPORTS
To adjust the brightness, contrast and
gamma of the screen
To set offset level
To costomize the color of the screen
To adjust the position of the screen
To improve the clarity and stability of the
screen
To costomize the screen status for a
user's operating environment
To select or customize desired image
settings
● : Adjustable
* : only for DSUB/DVI Input
** : only for HDMI Input
A : DSUB Input
D : DVI Input
H : HDMI Input
NOTE
The order of icons may differ depending on the model (A12~A21 ).
A12
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the main menu of the OSD appears.
Main Menu
MENU
: Exit
: Adjust (Decrease/Increase)
SET
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button Tip
Menu Name
Sub-menus
Icons
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
A13
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
PICTURE
DSUB/DVI input
BRIGHTNESS
To adjust the brightness of the screen.
CONTRAST
To adjust the contrast of the screen.
GAMMA
Set your own gamma value. : -50/0/50
On the monitor, high gamma values
display whitish images and low gamma
values display high contrast images.
BLACK LEVEL
You can set the offset level. If you select
'HIGH', the screen will be bright and if you
select ‘LOW’, the screen will be dark.
(only for HDMI input)
HDMI input
* Offset? As the criteria for video signal, it is the
darkest screen the monitor can show.
MENU : Exit
: Decrease
: Increase
SET : Select another sub-menu
COLOR
COLOR
PRESET
• sRGB: Set the screen color to fit the
SRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
RED
Set your own red color levels.
Set your own green color levels.
GREEN
MENU : Exit
: Decrease
BLUE
: Increase
SET : Select another sub-menu
Set your own blue color levels.
A14
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
TRACKING
HORIZONTAL
To move image left and right.
VERTICAL
To move image up and down.
CLOCK
To minimize any vertical bars or
stripes visible on the screen
background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove
any horizontal noise and clear or
sharpen the image of characters.
MENU : Exit
: Decrease
SHARPNESS
: Increase
SET : Select another sub-menu
A15
To adjust the clearness of the
screen.
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
LANGUAGE
To choose the language in which the
control names are displayed.
OSD
POSITION
To adjust position of the OSD window
on the screen.
WHITE
BALANCE
If the output of the video card is different
the required specifications, the color
level may deteriorate due to video
signal distortion. Using this function, the
signal level is adjusted to fit into the
standard output level of the video card
in order to provide the optimal image.
Activate this function when white and
black colors are present in the screen.
(only for DSUB input)
OVERSCAN
To select the range of output image for
DTV timing in HDMI input.
(only for HDMI input)
Recommend overscan function to turn
on when connect AV equipment.
RTC
If you set ON, you enable the Response
Time Control function.
If you set OFF, you disable the
Response Time Control function.
SETUP
SETUP
DSUB/DVI input
HDMI input
MENU : Exit
: Adjust
: Adjust
SET : Select another sub-menuPOWER
INDICATOR
Use this function to set the power
indicator on the front side of the monitor
to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power
indicator will automatically be turned on.
Restore all factory default settings except
"LANGUAGE."
Press the
,
buttons to reset immediately.
FACTORY
RESET
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled only when
the input signal is an analog signal.
A16
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
monitor.
Main menu
Sub menu
button on the right bottom of the
Description
CINEMA MODE It focuses better on the moving picture in
selected area.
*This function is operated only if the
fortemanager is installed to pc.
*Only for DSUB and DVI input.
AUTO BRIGHT
If select on,it automatically controls the
brightness of display to best suit the
surrounding working environment,providing
the optimal viewing condition and maximized
user convenience.
If select off,auto brightness is off.
TIME CONTROL Remind user using time by showing alarm
OSD and flickering LED.
Selection:OFF/1HOUR/2HOUR
LIVE SENSOR
This function turns on the button LED for
pushing comfortable.When detect the
presence of users hand before touch it.
SMART
To adjust AUTO BRIGHT,TIME CONTROL,
LIVE SENSOR.
If select ON it turns on AUTO BRIGHT,LIVE
SENSOR and makes time CONTROL to 1HOUR.
If select off,it turns off those.
If set AUTO BRIGHT,TIME CONTROL,LIVE
SENSOR directly,this setting is changed to
USER automatically.
A17
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
monitor.
button on the left bottom of the
DSUB/DVI input
HDMI input
Main menu
Sub menu
EZ ZOOMING
Description
EZ Zoom lowers the display’s resolution in
single-step increments. Depressing the button
once lowers the resolution by one step; while a
second button-press returns the resolution to
the original display settings.
*This function is operated only if the
forteManager is installed to PC.
*ForteManager is not supported in HDMI input.
4:3 IN WIDE
To select the image size of the screen.
WIDE
4:3
• WIDE : Switch to full screen mode according to input
image signal.
• 4 : 3 : Change the image signal ratio into 4:3.
A18
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
To select the color of the screen.
PHOTO EFFECT
• NORMAL :
The PhotoEffect function is disabled.
• GAUSSIAN BLUR :
This option is to add the effect to the screen that
the dark and sharp image becomes brighter and
more blurred.
• SEPIA :
This option changes the screen to be Sepia tone.
The Sepia tone is brown color tone.
• MONOCHROME :
This option changed the screen to be Gray tone.
The screen image is displayed with just white,
black, gray colors.
NORMAL
GAUSSIAN BLUR
SEPIA
MONOCHROME
*Photo Effect feature may not work in HDMI Input.
(Photo effect operate at DSUB format)
VOLUME
To adjust the volume of headphone/Earphone.
(Only for HDMI input)
SET
A19
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
the monitor.
button on the left bottom of
Menu Name
Icons
Sub-menu Name
Main menu
Sub menu
MOVIE
Description
Select this when you are watching a video or
movie.
DSUB/DVI input
INTERNET Select this when you are working on the
document (Word etc.)
HDMI input
GAME
Select this when you are playing a game.
NORMAL
Select this when you want to use the product in
the most general using environment.
* Normal mode is when f-ENGINE is turned off.
DSUB/DVI input
HDMI input
STANDARD Select this when you want to use the original
standard video.
* In the General (Standard) mode, the
is turned off.
A20
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
DSUB/DVI input
DEMO
This is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode.
HDMI input
SPORTS Select this when you watching general sports.
USER
To adjust the USER sub-menu
function,press the AUTO/SET Button.
You can manually adjust ACE or RCM (only for
DSUB/DVI input), HUE or SATURATION (only for
HDMI input).
You can save or restore the adjusted value even
when using a different environment.
... ACE(Adaptive Clarity Enhancer) : Selects the clarity mode.
DSUB/DVI input
Not applied
Weak clarity and luminosity contrast.
Strong clarity and luminosity contrast.
... RCM(Real Color Management) : Selects the color mode.
Not applied
Green enhance
Flesh tone
Color Enhance
HDMI input
... HUE : Adjust the screen hue.
... SATURATION : Adjust the screen saturation.
MENU : Exit
: Decrease
: Increase
AUTO/SET : Select another sub-menu
A21
Troubleshooting
Check the following before calling for service.
No image appears
● Is the power cord of the • Check and see if the power cord is connected
properly to the power outlet.
display connected?
● Is the power indicator
light on?
• Press the Power button.
● Is the power indicator
flickering?
• If the display is in power saving mode, try moving
the mouse or pressing any key on the keyboard to
bring up the screen.
• Try to turn on the PC.
● Do you see an "OUT OF • This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message on
frequency range of the display. See the
the screen?
'Specifications' section of this manual and
configure your display again.
● Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try again.
Do you see a "OSD LOCKED" message on the screen?
● Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
A22
Troubleshooting
Display image is incorrect
● Display Position is
incorrect.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
● On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
● Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
Important
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend
resolution.
If the recommended resolution (optimal resolution) is not selected, letters may
be blurred and the screen may be dimmed, truncated or biased. Make sure to
select the recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
A23
Troubleshooting
Display image is incorrect
● The screen color is
mono or abnormal.
• Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
• Make sure the video card is properly inserted in
the slot.
• Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
● The screen blinks.
• Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Have you installed the display driver?
● Have you installed the
display driver?
• Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
our web site: http://www.lge.com.
● Do you see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
monitor found"
message?
• Make sure to check if the video card supports
Plug&Play function.
A24
Specifications
W2253V
Display
21.5 inches (54.6 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 54.6 cm
0.248*0.248 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Input Form
Resolution
30 - 83 kHz (Automatic)
Analog,Digital : 56 - 75 Hz (Automatic)
HDMI : 56 - 61 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Max
Analog : VESA 1920 x 1080 @60 Hz
Digital : VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Recommend
Plug&Play
DDC 2B (Digital,HDMI), DDC 2AB (Analog)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
&Weight
Tilt Range
Power Input
Width
Height
Depth
Net
:
≤
≤
40 W(Typ.)
1W
1W
With Stand
Without Stand
52.25 cm / 20.57 inches 52.25 cm / 20.57 inches
39.63 cm / 15.60 inches 33.66 cm / 13.25 inches
19.80 cm / 7.79 inches
6.05 cm / 2.38 inches
4.0 kg (8.82 lbs)
Tilt
-5˚~15˚
AC 100-240V~ 50/60Hz 1.0A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached(
Power cord
Wall-outlet type
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
A25
Specifications
W2353V
Display
23.0 inches (58.4 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 58.4 cm
0.266*0.266 mm pixel pitch
Sync Input
Horizontal Freq.
Vertical Freq.
Input Form
Video Input
Signal Input
15 pin D-Sub Connector
DVI - D connector (Digital)
19 pin HDMI Connector
Analog (0.7 Vp-p/ 75 ohm), Digital, HDMI
Input Form
Resolution
30 - 83 kHz (Automatic)
Analog,Digital : 56 - 75 Hz (Automatic)
HDMI : 56 - 61 Hz (Automatic)
Separate TTL, Positive/Negative
SOG (Sync On Green)
Digital (HDCP)
Max
Analog : VESA 1920 x 1080 @60 Hz
Digital : VESA 1920 x 1080 @60 Hz
VESA 1920 x 1080 @60 Hz
Recommend
Plug&Play
DDC 2B (Digital,HDMI), DDC 2AB (Analog)
Power
Consumption
On Mode
Sleep Mode
Off Mode
Dimensions
&Weight
Tilt Range
Power Input
Width
Height
Depth
Net
:
≤
≤
42 W(Typ.)
1W
1W
With Stand
Without Stand
55.85 cm / 21.98 inches 55.85 cm / 21.98 inches
41.75 cm / 16.43 inches 36.30 cm / 14.29 inches
19.80 cm / 7.79 inches
7.53 cm / 2.96 inches
4.5 kg (9.92 lbs)
Tilt
-5˚~15˚
AC 100-240V~ 50/60Hz 1.0A
Environmental
Conditions
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity
10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity
5 % to 90 % non-Condensing
Stand Base
Attached(
Power cord
Wall-outlet type
), Detached ( O )
NOTE
Information in this document is subject to change without notice.
A26
Specifications
Preset Modes (Resolution)
DSUB/DVI Timing
Display Modes (Resolution)
1
2
3
4
5
6
7
8
9
10
11
*12
Horizontal Freq. (kHz)
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
65.290
67.500
720 x 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1920 x 1080
Vertical Freq. (Hz)
70
60
75
60
75
60
75
75
60
75
60
60
* Recommend Mode
HDMI Timing
Display Modes (Resolution)
1
2
3
4
5
6
7
8
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
60
50
50
60
50
60
50
60
480P
576P
720P
720P
1080i
1080i
1080P
1080P
Indicator
MODE
On Mode
Sleep Mode
Off Mode
LED Color
Red
Flicker
Off
A27
Digitally yours
Download PDF

advertising